Modify get_psu_presence(). Move read() and close() to "try: ... except IOError:" To avoid when read
port present sysfs fail. This exception will let sfputil.py to exit. So "sfputil show eeprom" can't show other port status.
- move single instance services into their own folder
- generate Systemd templates for any multi-instance service files in slave.mk
- detect single or multi-instance platform in systemd-sonic-generator based on asic.conf platform specific file.
- update container hostname after creation instead of during creation (docker_image_ctl)
- run Docker containers in a network namespace if specified
- add a service to create a simulated multi-ASIC topology on the virtual switch platform
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
Signed-off-by: Suvarna Meenakshi <Suvarna.Meenaksh@microsoft.com>
* [plugins]add fan functions, add voltage, current, power for psu
* [plugins]link fanutil.py and psuutil.py to those in 2700
* [plugin]add thermal
* [plugin]add symbol links for thermalutil for all SKUs
- Sfp,Eeprom,Chassis(transceiver change event) support added for z9264f Platform 2.0 API
- Added Interrupt handler to SFP change event in dell_z9264f_fpga_ocores.c
- Fixed few indentation and offset issues in sfputil.py for z9264f
* [MultiDB] (except ./src and ./dockers dirs): replace redis-cli with sonic-db-cli and use new DBConnector
* update comment for a potential bug
* update comment
* add TODO maker as review reqirement
* Update arista driver submodule
* Add support for 7260CX3-64E in boot0
* Refactor boot0 platform specific definition
Make it easier to manage new sku
* Add support for 7050CX3-32S in boot0
Just contains the required boot0 information
* Add basic plugin support for DCS-7050CX3-32S
* Add port config for Arista-7050CX3-32S-C32
Co-authored-by: yurypm <yurypm@arista.com>
Co-authored-by: byu343 <byu@arista.com>
* [initramfs] Updated reuired tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Updated required tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [Platform] [Marvell] Platform specific debian package for et6448m device
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Removed auto-generated files
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Marvell arm modules update and platform config update
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [iniramfs] add initramfs uboot-utils hook script only for ARM
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [device][accton]: Update for AS7326-56X complying the Broadcom SAI latest version 3.5.3.1m-26
* Update Accton-AS7326-56X to adapt xxx.config.bcm based on the latest update of Device-Specific File Directory Structure.
* Update Accton-AS7326-56X LED BIN complying the Broadcom SAI latest version 3.5.3.1m-26
Signed-off-by: polly_hsu@edge-core.com
* [device][accton]: Merge the SDK config with #3103 (Fix Accton as7326 port breakouk)
Signed-off-by: Polly Hsu <pollyhsu2git@gmail.com>
There is no ledd in qfx5210 platform. This patch skip starting
ledd in pmon container. This also will help in fixing the pmon
container not getting started if there is no ledd running.
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Implement part of the Chassis and Fan related APIs.
Psu APIs
get_voltage()
get_current()
get_power()
get_powergood_status()
set_status_led()
get_status_led()
Update Fan APIs to support PSU FAN
get_direction()
get_speed()
get_target_speed()
get_speed_tolerance()
get_target_speed()
PSU APIs base on Device API
get_name()
get_presence()
get_model()
get_serial()
get_status()
- How I did it
Implement PSU APIs
Update FAN API to support PSU Fans
Add PSU object to Chassis API
- Updated buffers config;
- Set eth2 as CPU port;
- Added systemd service file to load bf_fpga.ko
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
- optoe driver truncates invalid pages(ff) but sff driver doesn't truncate.so,the DOM related calculation made by sff8436 driver will show incorrect data.
- Few optics doesn't support DOM.
- SFP plugins currently returns None for unreadable pages and this'd throw the below mentioned error in sfpshow eeprom --dom.
Implement part of the Chassis and Fan related APIs.
- Chassis APIs
get_base_mac()
get_serial_number()
get_serial_number()
get_system_eeprom_info()
get_reboot_cause()
- Fan APIs
get_direction()
get_speed()
get_target_speed()
get_speed_tolerance()
set_speed()
set_status_led()
get_target_speed()
- Fan APIs base on Device API
get_name()
get_presence()
get_model()
get_serial()
get_status()
Signed-off-by: Wirut Getbamrung wgetbumr@celestica.com
* Preemphasis values for various optics
This patch adds the preemphasis values for the various supported
optics for qfx5210 platform
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* Update driver and Add new platform API implementation for Inventec D6356
* Update Platform API (SFP)
* Update Platform API (QSFP)
* Update Platform API (FAN, THERMAL)
Signed-off-by: David Xiao <xiao.david@inventec.com>
1. add the console port in install.conf
2. update the ag9032v2a configuration file
3. add the default_sku in ag9032v2a
Signed-off-by: hans-tseng <hans.tseng@deltaww.com>
* Remove the divide by 4 operation to the under the hood SAI
This is to avoid the need and thus the confusion for application program to know
the mmu internal architecture
This change must have support from SAI change to reach the correct
config
Signed-off-by: Wenda <wenni@microsoft.com>
* Relegate the divide by 4 operation to the under the hood SAI for egress
lossless pool
Extend to 7060 and 6100
Signed-off-by: Wenda <wenni@microsoft.com>
* Add more TH/TH2 hwskus
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Update config test
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Add TH2 ingress lossy profile
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Move the divide by 4 operation to SAI internal
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* [bcm SAI] Upgrade Broadcom SAI to version 3.5.3.1-15
- Broadcom SAI 3.5 GA release 20190924.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Orchagent is crashing on the latest SONiC images. Issue #458
is raised to track the problem. Dynamic port breakout
commit 6f40933d3d introduced
this regression. One of the recommendation that we received
was to disable the loopback and mgmt ports in bcm config.
It was helpful in fixing the issue but not the ideal solution.
It works on qfx5210 as the loopback and management configurations
are not applicable.
While the orchagent crash is being debugged, we need this commit
to fix the issue in qfx5210 platform. This patch can be reversed
once the correct fix for the orchagent is identified.
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* add config.bcm for hlx
* modify config.bcm path for hlx
* Delete hx4-cel-hbtn-48x1G+4x10G.config.bcm
* add config.bcm and path
* update led for cxp
* Add new device data for dx010
* Adding platform support for Juniper QFX5210
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* [Juniper][QFX5210] Optoe driver for SFP management
This commit implements the following changes
- Moving to optoe driver for sfp management
- Removing the old sfp driver
- Updating the port-config.ini to add the index field
- Correction in sfputil.py to incorporate optoe driver
- Platform support for 'poweroff' command
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* Fixed initial state for eeprom.py and sfputil.py when thrift server is down
* Added transceiver plug-in/out event processing
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
mellanox simx platform don't have QSFP sysfs created, this script will cause timeout issue on simx platform
Signed-off-by: Kebo Liu <kebol@mellanox.com>
Added exceptions handling for BFN psuutil.py and eeprom.py which are raised when syseepromd and psud try to connect to the BFN thrift server which is not up yet. Now the exceptions backtrace is not logged to the syslog. Also psud doesn't exit on system bootup due to uncaught exception.
Signed-off-by: Vitaliy Senchyshyn <vsenchyshyn@barefootnetworks.com>
This switch has 27 fiber ports, 4x25G, 20x10G , and 3x100G ports ports.
CPU: Intel ® Atom™ Processor C3508,1.6GHz
BMC: None
MAC: Broadcom BCM88470 (Qumran AX).
MISC: Support IEEE1588v2, hot-swappable PSU, hot-swappable fan tray.
But notice here, BCM88470 is not supported for SAI now.
So the syncd container is not running so far.
Signed-off-by: roy_lee <roy_lee@accton.com>
Corrected the ingress and egress lossy and lossless buffer pool and profile values.
Single pool for lossy and lossless traffic for PFC priority 3 and 4.
In HWSKU DellEMC-S5232f-P-100GG/25G/10G. Defaults to lossy profile. No Lossless support.
2 default mmu_init.data files (TD3-DEFAULT-LOSSLESS-P3P4 and "TD3-DEFAULT" created in SAI code. This will have cpu pool configuration and MMU init related configurations.
TD3-DEFAULT.data file is only supports lossy.
TD3-DEFAULT-LOSSLESS-P3P4.data file is supports lossless on P3 and P4.
* Utilize the same sai.profile and config.bcm file
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Fix the index issues for HWSKU: Seastone-DX010-25-50 and Seastone-DX010-50-40
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-swss submodule
* src/sonic-swss 63afbd5...5be3963 (11):
> Remove the platform check for remove/add port action at init phase. (#1006)
> [test]: Add Class object in each test script file (#992)
> [vstest]: add --imgname option to specify vs image to test (#996)
> [qosorch]: Add cir and pir parameters for scheduler (#991)
> [vstest]: report error when team kernel module is not available (#994)
> Support per buffer pool watermark polling mode (#973)
> [test]: Update test_vlan to use dvs functions (#986)
> Add synchronous switch to orch agent (#987)
> ARM32 bit fixes, for 64bit printf format specifier (#989)
> [portsorch]: Rename function isPortReady() to allPortsReady() (#990)
> [routeorch]: Fix observer detaching procedure for next hop observers (#985)
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Add fan control for as7116-54x
Modify sfputil.py to support sfp insert and remove events for as7116-54x
Modify port_config.nps to set port default admin down
Modify port_config.ini for add speed attr
Code format optimization like remove newline
Modify buffers_defaults_t0 and t1, change ingress_lossless_pool mode from dynamic to static
Add nephos_dac.nps and nephos_opt.nps for support difference dac and fiber module
* [Makefile/slave docker] ARM arch doesn't support few packages
iproute2 is missing for ARM sonic-slave docker
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Add platform support for delta ag9032v2a
CPU: Broadwell-DE
ASIC: BMC56870 with <100Gx32 + 10Gx1>
BMC: AST2520:
- What I did
add the new platform of delta ag9032v2a
- How I did it
1.provide the QSFP and SWPLD attributes and create the virtual buses of I2C
2. provide the port configuration
- How to verify it
1. psuutil.py
2. sfputil.py
3. bcmcd
- Known issue
The port LED is not ready. We noticed that BCM chip had the M0 FW initialization issue while bringing up SDK with "BRCM SAI ver: [3.5.2.3], OCP SAI ver: [1.4], SDK ver: [6.5.14]" and here is the information :
root@sonic:/home/admin# bcmcmd "M0 status"
M0 status
0:soc_iproc_data_send_wait: No response for msg 2
M0 FW is NOT Running
M0 FW Version is 0.0
Host FW Version is 1.0
Host and M0 FW Versions do not match!!!
Signed-off-by: hans-tseng <hans.tseng@deltaww.com>
xcvrd is broken because a newly introduced interface get_transceiver_dom_threshold_info_dict in common code calls a unsupported interface _read_eeprom_specific_bytes.
Fix the issue by implement get_transceiver_dom_threshold_info_dict to avoid calling the unsupported interface.
* [as5712-54x]
Verified with index from 1.
Add qsfp_event() for command "show interaface trancerver".
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as6712-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7726-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7712-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5812-54x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5712-54x]
Update port-config with 1-based index.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5812-54x]
Somehow the service may block, use type=simple to work-around.
Add syslog function for monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7716-32x]
Update port-config with 1-based index.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7816-64x]
Update port-config with 1-based index.
Implement sfputil change_event.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7326-56x]
Update port-config with 1-based index.
Implement sfputil change_event.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Remove debug code.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7312-54x]
Update port-config with 1-based index and default port speed.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [devices]: Add a new supported device DellEMC s5232f
* Switch Vendor: DellEMC
* Switch SKU: s5232F
* ASIC Vendor: Broadcom
* Swich ASIC: Trident3
* Port Configuration: 32x100G
* SONiC Image: sonic-broadcom.bin
* LED support for s5232f
* Changes Include ipmitool implementation for platform_sensors script is inclued in pmon startup
* Added 100G,25G,10G configruation ( 100G is default).
* s5232[device] PSU detecttion and default led state support
* Add driver and util for peripherals of as7312-54xs, most are copied from as7312-54s.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add default port speed and index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Update i2c addr of psus.
Add system logging for monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct syntax of module_dirs.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Validate sfputil after tested.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct the index of eeprom mapping.
Signed-off-by: roy_lee <roy_lee@accton.com>
* fix the issue Bug SW #1816356 which is due to failing to test whether dom supported prior to reading dom data
* use pre-defined variable to avoid magic number.
no need to read 16 bytes, 1 byte is enough since calibration and dom capability are all in bytes at offset 92
Variables SFP_VLOT_OFFSET and QSFP_VLOT_OFFSET containing the typo are originally defined in repo sonic-platform-common. The typo has been fixed in PR #33. However, some Mellanox-specific code hasn't updated correspondingly, which results in xcvrd fail to start.
This PR updates the variable name in Mellanox-specific code correspondingly to fix that.
* Switch Vendor: DellEMC
* Switch SKU: s5232F
* ASIC Vendor: Broadcom
* Swich ASIC: Trident3
* Port Configuration: 32x100G
* SONiC Image: sonic-broadcom.bin
* LED support for s5232f
* Changes Include ipmitool implementation for platform_sensors script is inclued in pmon startup
* Added 100G,25G,10G configruation ( 100G is default).
These patches add support for the Broadcom XMC card (XLR/GTS). At this moment
only Tomahawk switch (BCM956960K) is supported. Add
device/broadcom/x86_64-bcm_xlr-r0 and
platform/broadcom/sonic-platform-modules-brcm-xlr-gts files
* [sfputil]Remove the dependency on sysfs for sfputil, mainly get_presence and port_to_eeprom_mapping
Remove the dependency on sysfs, including:
1. rewrite get_presence by using ethtool;
2. remove interface port_to_eeprom_mapping which is no longer referenced;
3. remove code that references port_to_eeprom_mapping and _port_to_eeprom_mapping;
4. remove private member qsfp_sysfs_path which is no longer referenced.
* [sfputil.py]
minor adjustment: move the presence=False to the beginning of get_presence.
* [device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py]
purpose and restrictions
1. reading eeprom via ethtool.
2. avoid changing common codes shared by all the manufacture (sonic-platform-common), contrain all the modifications with Mellanox-specific code.
current implementation
A new class based on SfpUtilBase and a new method _read_eeprom_specific_bytes_via_ethtool have been introduced in order to change the way the eprom DOM data is read. Typically the best practice to do this kind of thing is to contrain the modification within the function which execute reading operations only and keep other stuffs (especially the interface) untouched. However, this can hardly be achieved since the original reading function takes the file object as input parameter to represent the port. It is done by having the file object to point to /var/run/hwmanagement files, which will not be maintained in the future. As a result, a new interface has to be introduced with a port number/name as input parameter in order to get rid of the dependency on the those files:
_read_eeprom_specific_bytes_via_ethtool
Since the interface changed, all methods that call the interface should also be overwritten in order to call the new interface, including:
_read_eeprom_devid
get_transceiver_info_dict
get_transceiver_dom_info_dict
Only interface used to read eeprom DOM has been replaced and the main logic has not been changed except the following mentioned.
1. reading DOM data for sfp port, which is implementioned in get_transceiver_dom_info_dict. In this case a "calibration" should be firstly read from eeprom before other values like temperature, voltage, rx/tx power, can be parsed. However, this has been ignored in the original code, resulting in that the data cann't be parsed.
2. In the original implemention the data area containing the data are read from DOM separatedly in order to avoid read uncessary data and achieve a better performance. Having used ethtool to read DOM data, the performance gap between reading all the area and reading the spot data separatedly has been narrowed to almost zero. To make the code neat and readable, we change the way to read this data.
* [sfputil] Returns dict with all data set to N/A for ports without dom support
Currently, the way in which dom data is read has been changed from using sysfs to using ethtool.
The ethtool returns None for ports without dom support, resulting in None being returned. However, this fails xcvrd to add the TRANSCEIVER_DOM_SENSOR table entry of associated port to CONFIG_DB and then causes SNMP fail.
To address this issue a default dict is initialized with all data set to 'N/A' and is returned is the above case.
BTW, in the original implementation which sysfs is used to read dom data, even though non-None data is returned for ports without dom support, it does not contain valid data. This can result in wrong data in TRANSCEIVER_DOM_SENSOR table.
* [sfputil]
removing unnecessary empty lines
removing redundent code
replacing hardcoding strings/numbers with predefined const variables
* Add new device accton_as5812_54x.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rename 5812's config.bcm.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change fan module to support lm-sensors.
Validate for thermal policy.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add bask reset and lpmode control of 6 QSFP ports.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Get currect duty of fan for comparing. Instead of by stored duty from previous iteration.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Roll back the mistakes to update mellanox submodules.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rollback for misoperation on submodule platform/p4/SAI-P4-BM.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change indexes of ports to start from 1, as them on the front panel.
Add low-power mode control of the transciever's eeprom, follows SFF-8436.
Signed-off-by: roy_lee <roy_lee@accton.com>
This commit adds new code and JAON file to support PFC
and MMU setting for PFC feature on z9264f-Q64 (40G) T0
and T1 support. The buffers_defaults_t0.json and
buffers_defaults_t1.json file has the recommended values
for T0 and T1 configuration.
Unit tested and verified by running JSON file and checking
the hardware registers and table in broadcom. THe settings
in hardware are reflecting the JSON values.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* Add boot0 support for the 7280CR3
* Add platform and plugins for 7280CR3
* Add port config for 7280CR3
* Add platform_reboot for 7280CR3
* Add support for 7280CR3-32D4 based on the 7280CR3-32P4
* Update arista driver submodules
- Introduce new 7280CR3-32P4
- Improve to the led plugin for OSFP
This commit adds new code and JSON file to support PFC and
broadcom recommended MMU setting for PFC feaure on z9264f
(100G) T1 support. The buffers_defaults_t1.json file has
the broadcom recommended values for T1 configuration.
Unit tested and verified by running the JSON file and checking
the hardware registers and table in broadcom. The settings in
the hardware is reflecting the broadcom recommended values.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* Fix showing systemd shutdown sequence when verbose is set
* Fix creation of kernel-cmdline file
Sometimes boot0 prints error
"mv: can't preserve ownership of '/mnt/flash/image-arsonic.xxxx/kernel-cmdline': Operation not permitted"
* Improve flash space usage during installation
Some older systems only have 2GB of flash available. Installing a second
image on these can prove to be challenging.
The new installation process moves the installer swi to memory in order
to avoid free up space from the flash before uncompressing it there.
It removes all the flash space usage spike and also improves the IO
since the installation is no more reading and writting to the flash at
the same time.
* Add support of 7060CX-32S-SSD
* 7260CX3: use inventory powerCycle procedures
* 7050QX-32S: use inventory powerCycle procedures
* 7050QX-32: use inventory powerCycle procedures
* platform: arista: add common platform_reboot
Replace platform_reboot by a link to new common for devices already
using a similar script.
* 7060CX-32S: use inventory powerCycle procedures
* Install python smbus in pmon
Some platform plugin need the python smbus library to perform some actions.
This installs the dependency.
* [platform/cel] Implement FAN APIs based on the new platform API
* [platform/cel] Move platform api to under device platform
* [platform/cel] Remove rule to build platform api python wheel
* DellEMC S6000, xcvrd support
* sleep 1 second to avoid busy looping
* removal of dead code
* Correct typo error to 1 second
* Introduced 1 second sleep
* Revamped script with blocking call support
* get_transceiver_change_event api definition update
* adding timeout support for get_transceiver_change_event
* Add new device CIG CS6436-56P
* Delete minigraph.xml
It isn't necessary in the current system, just delete it
* Update qos.json.j2
* Update port_config.ini
Add the speed column. The cmd to show interface status as:
root@switch1:~# show interface status
Interface Lanes Speed MTU Alias Oper Admin Type Asym PFC
----------- --------------- ------- ----- ------------ ------ ------- ------ ----------
Ethernet0 8 25G 9100 Ethernet1/1 up up SFP N/A
Ethernet1 9 25G 9100 Ethernet2/1 up up SFP N/A
Ethernet2 10 25G 9100 Ethernet3/1 down down N/A N/A
Ethernet3 11 25G 9100 Ethernet4/1 down down N/A N/A
Ethernet4 12 25G 9100 Ethernet5/1 down down N/A N/A
Ethernet5 13 25G 9100 Ethernet6/1 down down N/A N/A
Ethernet6 14 25G 9100 Ethernet7/1 down down N/A N/A
Ethernet7 15 25G 9100 Ethernet8/1 down down N/A N/A
Ethernet8 16 25G 9100 Ethernet9/1 down down N/A N/A
Ethernet9 17 25G 9100 Ethernet10/1 down down N/A N/A
Ethernet10 18 25G 9100 Ethernet11/1 down down N/A N/A
Ethernet11 19 25G 9100 Ethernet12/1 down down N/A N/A
Ethernet12 20 25G 9100 Ethernet13/1 down down N/A N/A
Ethernet13 21 25G 9100 Ethernet14/1 down down N/A N/A
Ethernet14 22 25G 9100 Ethernet15/1 down down N/A N/A
Ethernet15 23 25G 9100 Ethernet16/1 down down N/A N/A
Ethernet16 32 25G 9100 Ethernet17/1 down down N/A N/A
Ethernet17 33 25G 9100 Ethernet18/1 down down N/A N/A
Ethernet18 34 25G 9100 Ethernet19/1 down down N/A N/A
Ethernet19 35 25G 9100 Ethernet20/1 down down N/A N/A
Ethernet20 40 25G 9100 Ethernet21/1 down down N/A N/A
Ethernet21 41 25G 9100 Ethernet22/1 down down N/A N/A
Ethernet22 42 25G 9100 Ethernet23/1 down down N/A N/A
Ethernet23 43 25G 9100 Ethernet24/1 down down N/A N/A
Ethernet24 48 25G 9100 Ethernet25/1 down down N/A N/A
Ethernet25 49 25G 9100 Ethernet26/1 down down N/A N/A
Ethernet26 50 25G 9100 Ethernet27/1 down down N/A N/A
Ethernet27 51 25G 9100 Ethernet28/1 down down N/A N/A
Ethernet28 56 25G 9100 Ethernet29/1 down down N/A N/A
Ethernet29 57 25G 9100 Ethernet30/1 down down N/A N/A
Ethernet30 58 25G 9100 Ethernet31/1 down down N/A N/A
Ethernet31 59 25G 9100 Ethernet32/1 down down N/A N/A
Ethernet32 64 25G 9100 Ethernet33/1 down down N/A N/A
Ethernet33 65 25G 9100 Ethernet34/1 down down N/A N/A
Ethernet34 66 25G 9100 Ethernet35/1 down down N/A N/A
Ethernet35 67 25G 9100 Ethernet36/1 down down N/A N/A
Ethernet36 68 25G 9100 Ethernet37/1 down down N/A N/A
Ethernet37 69 25G 9100 Ethernet38/1 down down N/A N/A
Ethernet38 70 25G 9100 Ethernet39/1 down down N/A N/A
Ethernet39 71 25G 9100 Ethernet40/1 down down N/A N/A
Ethernet40 72 25G 9100 Ethernet41/1 down down N/A N/A
Ethernet41 73 25G 9100 Ethernet42/1 down down N/A N/A
Ethernet42 74 25G 9100 Ethernet43/1 down down N/A N/A
Ethernet43 75 25G 9100 Ethernet44/1 down down N/A N/A
Ethernet44 76 25G 9100 Ethernet45/1 down down N/A N/A
Ethernet45 77 25G 9100 Ethernet46/1 down down N/A N/A
Ethernet46 78 25G 9100 Ethernet47/1 down down N/A N/A
Ethernet47 79 25G 9100 Ethernet48/1 down down N/A N/A
Ethernet48 84,85,86,87 100G 9100 Ethernet49/1 up up QSFP28 N/A
Ethernet49 80,81,82,83 100G 9100 Ethernet50/1 up up QSFP28 N/A
Ethernet50 92,93,94,95 100G 9100 Ethernet51/1 down down N/A N/A
Ethernet51 88,89,90,91 100G 9100 Ethernet52/1 down down N/A N/A
Ethernet52 108,109,110,111 100G 9100 Ethernet53/1 down down N/A N/A
Ethernet53 104,105,106,107 100G 9100 Ethernet54/1 down down N/A N/A
Ethernet54 116,117,118,119 100G 9100 Ethernet55/1 down down N/A N/A
Ethernet55 112,113,114,115 100G 9100 Ethernet56/1 down down N/A N/A
root@switch1:~#
* [HWSKU] Added Arista-7060CX-32S-Q24C8 HWSKU
Added an Arista HWSKU with 24x40G + 8x100G ports
The ports are distributed along core lines
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
* [HWSKU] Added Arista-7060CX-32S-T96C8 HWSKU
Added the bcm config files for a 96x25G+8x100G ToR
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
* [HWSKU] Added Arista-7060CX-32S-Q24C8 HWSKU
Added an Arista HWSKU with 24x40G + 8x100G ports
The ports are distributed along core lines
Signed-off-by: Michel Moriniaux <m.moriniaux@criteo.com>
[devices] add new accton platform minipack.
Add support for new platform, minipack.
It has
CPU: Broadwell DE – D1527
MAC: Tomahawk3(BCM56980).
PHY:Broadcom BCM81724, 4 pcs, Gearbox for PIM-16Q
BMC:AST2520
8 hot-swappable Port-Interface-Modules, each of them has 16*100G QSFP.
- What I did
Add device and platform files for minipack.
- How I did it
Add as SONiC Porting Guide.
- How to verify it
decode-syseeprom
sensors
psuutil
sfputil
thermal monitor
bcmsh on port status
(port LEDs may not working)
* [dell/Z9100] Fix for optics not detected in fanout mode
This commit fixes the issue of optics not detected
error while running sfputil show eeprom command. The root
casuse was the value of port index from port_config.ini for
fan out scenario. The port index should be starting from 0
and not 1. Platform cpld registers are assuming the port
numbers to start from 0 (lowermost bit), sfputils.py uses this
port number in get_presence function. Since the indexing passed
is wrong the optics was not detected and gave SFP EEPROM not
detected message.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@Dell.com>
* [dell/z9100] Fix for optics not detected in fanout mode
This commit fixes the issue of optics not detected error
while running sfputil show eeprom command. The root cause
was wrong port_index in fan out scenarios. Earlier fix of
changing the port_config.ini is reverted and changes made
in z9100 platform specific sfputil.py file. The port number
is decrement and tested for both 100G and 50G fanout cases.
Tested for the following show commands and test was succesful
show interfaces status, show interfaces transceiver eeprom,
show interfaces transceiver lpmode, show interface tranceiver
presence.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@Dell.com>
* QoS config change: 1) DSCP mapping; 2) link pg/queue 6 to lossy buffer;
3) redistribute scheduler
Signed-off-by: Wenda <wenni@microsoft.com>
* Add scheduling weight to queue 2
Signed-off-by: Wenda <wenni@microsoft.com>
* Link pg/queue 2 to lossy buffer
Signed-off-by: Wenda <wenni@microsoft.com>
* Update the pg headroom for a7060-D48C8 50G
Signed-off-by: Wenda <wenni@microsoft.com>
* Update config gen test for qos
Signed-off-by: Wenda <wenni@microsoft.com>
* Update pg headroom size, and update egress lossy pool size accordingly
Signed-off-by: Wenda <wenni@microsoft.com>
* Update headroom pool size; Update ingress service pool and egress lossy
pool sizes accordingly;
Signed-off-by: Wenda <wenni@microsoft.com>
* a7260: update headroom pool size; Update ingress service pool and egress lossy pool sizes accordingly;
Signed-off-by: Wenda <wenni@microsoft.com>
* Update config gen test for buffer
Signed-off-by: Wenda <wenni@microsoft.com>
The sai profile itself can support 32x50G+16x100G/40G while
the initial port_config.ini uses 40G speeds for port 17-32.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
- Also initialized the number of cos queues in AS5712 to 8.
Else the interfaces are not coming up due to a lower default value of cos queues in AS5712.
Fix:
- Enable alpm settings in the platform config file for AS5712.
- With the current values of l2_mem_entries (163840) and l3_mem_entries (81920), the memory is not sufficient. Scale them down to the
values that work for ALPM in as5712 [l2_mem_entries = 32768, l3_mem_entries = 16384].
Signed-off-by: kiran.kella@broadcom.com
dell_ich module fails to load sometimes due to the failure of pci_get_drvdata().
This function is responsible for fetching INTEL PCI related memory handle in kernel. This is implemented in lpc_ich kernel module.
Due to race in addition/deletion of kernel modules, sometimes lpc_ich loads after dell_ich.
Because of this behaviour dell_ich module fails to load.
Fixed by addding dependency between modules.
Removed i2c_mux_gpio module from blacklist entry as it is not the original root case of this issue.
This commit has the forward porting of changes from 20180330
to master. Unit tested by checking the broadcom registers
for the values. The values in hardware reflect the correct values
except for TC to PFC priority group map values. Master branch values
for TC to PFC priority group map for both z9100 and s6100 in incorrect,
I have a build of Oct 12 master and the values are correct in
that build.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@Dell.com>
* Use default timeout value which will block the select function
* Submodule update for argument type issue in Select class
Submodule update sonic-swss-common:
e8caaea - Align the argument type with epoll_wait() (#255)
3ea133d - [selectable]: Update throw message (#253)
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
* Upgrade SAI to v1.2.4
* Add a new supported device accton as7116
* Add maintainer info for deb
* Add mk file for accton 7116
* fix some bug for sai 1.2.4
* fix git commit error for sdk and sai
* change sai and sdk deb name
* add config file for qos support
* initial commit
* Delete qos.json
* Delete buffers.json.j2
* Delete qos.json
* Delete buffers.json.j2
* Delete buffers.json.j2
* Delete qos.json
* add support for sai 1.3.0
* add qos and buffer file for device and add sensor driver for 7116
* change buffer template
* fix fan led bug
* add support for linux-4.9
* update device driver and update sdk and sai for support kernel 4.9
* 1) DSCP 46 to 5; 2) ecn config for lossless traffic; 3) ecn on by default; 4) DWRR equal weight;
Signed-off-by: Wenda <wenni@microsoft.com>
* 1) link pg & queue 5 to lossy buffer profile; 2) ingress lossless alpha 1/8
Signed-off-by: Wenda <wenni@microsoft.com>
* Update the test case for qos & buffer json template
Signed-off-by: Wenda <wenni@microsoft.com>
* Migrate a7050-qx32 and s6000 to use pg_profile lookup architecture
Signed-off-by: Wenda <wenni@microsoft.com>
* Update pg headroom egress service pool for a7050-qx-32s, a7050-qx32, and s6000
Signed-off-by: Wenda <wenni@microsoft.com>
* Link queue 5 to lossy profile
Signed-off-by: Wenda <wenni@microsoft.com>
* xcvrd OIR support for Dell S6100/Z9100 switches
Introduced check_interrupts function to handle missed interrupts.
port_dict updated and returned for appropriate OIR events.
Added support for both S6100/Z9100 switches.
* Revamped sfputil.py for PEP8 Standards
* Add kernel cmdline, tg3.short_preamble=1 tg3.bcm5718s_reset=1, to validate mdio to external PHY.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Push submodule, sonic-linux-kernel, to patch of tg3 short_preamble.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Restore to former version, for this platform is not maintained by Accton.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Update arista drivers submodule
* Ignore the possible timestamp warning in tar extraction
* Add verbosity toggle to boot0
Console logging is slow because of the 9600 baud rate.
Some time can be saved by decreasing the console verbosity.
* Add hook mechanism in boot0.
Support additional features in boot0 via hooks.
Hooks are unpacked and executed at post-install or pre-exec time.
* Fix 7170 sensors.conf file
Fix critical temperature settings for MAX6658 sensors
* Fix the random swap of storage devices
For arista 7050 switches running with linux 4.9, it is likely the device
name of flash drive (/dev/sda) and usb (/dev/sdb) randomly swap in kernel
booting, depending on which one is ready first. It breaks the expectation
that flash will be mounted as root by setting root=/dev/sda1. This patch
will correct ROOT to flash device refering to the path under block_flash.
* Fix 7170 fancontrol
* Do not remove aquota.user file in boot0
This file is a filesystem protected file used by EOS.
It can be simply removed and will make the SONiC installation failed if
not skipped.
* syncd changes to disk and add e1000 driver to sonic vm
* add pg_profile_lookup.ini
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* update swss and sairedis
sairedis:
* d146572 2018-11-22 | Fix interface name used on link message using lane map (#386)
swss:
* c74dc60 2018-11-22 | [vstest]: use eth1~32 as physical interface name in vs docker (#700) (HEAD -> master, origin/master, origin/HEAD) [lguohan]
* 6007e7f 2018-11-22 | [portmgrd]: Fix setting default port admin status and MTU (#691) [stepanblyschak]
* 6c70f6d 2018-11-22 | [portsorch] Fix port queue index init bug (#505) [yangbashuang]
* 70ac79b 2018-11-21 | [gitignore]: Update all binary names in the ignore list (#698) [Shuotian Cheng]
* 2a3626c 2018-11-21 | [test]: Remove duplicate legacy ACL tests (#699) [Shuotian Cheng]
* 8099811 2018-11-20 | [aclorch]: Remove unnecessary warning message (#696) [Shuotian Cheng]
* 63d8ebc 2018-11-18 | [portsorch]: Remove duplicate local variables - port (#690) [Shuotian Cheng]
* 28dc042 2018-11-18 | Remove default docker name value of swss. (#692) [Jipan Yang]
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Unify qos config with qos_config.j2 template
Signed-off-by: Wenda <wenni@microsoft.com>
* Change 7050 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2
modified: device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2
* Change a7060, a7260, s6000, s6100, z9100 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
* Change mlnx devices to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: ../../../mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2
modified: ../../../mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2
* Change barefoot devices to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2
modified: barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2
* Change accton as7212 to use qos config template
Signed-off-by: Wenda <wenni@microsoft.com>
modified: accton/x86_64-accton_as7212_54x-r0/AS7212-54x/qos.json.j2
* Apply PORT_QOS_MAP to active ports only
Signed-off-by: Wenda <wenni@microsoft.com>
* Update qos config test with qos_config.j2 template
Signed-off-by: Wenda <wenni@microsoft.com>
* Update sample output of qos-dell6100.json
Signed-off-by: Wenda <wenni@microsoft.com>
* Remove generating the default port name and index list, i.e., remove the generate_port_lists macro, because PORT is always defined
Signed-off-by: Wenda <wenni@microsoft.com>
* Include pfc_to_pg_map according to platform asic type obtained from
/etc/sonic/sonic_version.yml rather than specifying per hwsku
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Customize TC_TO_PRIORITY_GROUP_MAP and
PFC_PRIORITY_TO_PRIORITY_GROUP_MAP for barefoot
Signed-off-by: Wenda <wenni@microsoft.com>
* Unify PFC_PRIORITY_TO_PRIORITY_GROUP_MAP: remove "0":"0", "1":"1" as
these two pgs do not generate PFC frames.
Signed-off-by: Wenda <wenni@microsoft.com>
Snmp container needs to access the PSU path, but /bsp doesn't mount
into the container, so need to use the real path rather than a symlink.
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
Update the hw-mgmt to latest release V.2.0.0060.
Update the related files according to the latest hw-mgmt.
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
* [device]: Add support for Mellanox MSN2010
MSN2010 runs on Spectrum silicon and has 22 ports:
18 25GbE and 4 100GbE
* [device]: Fix a potential qos config issue for MSN2700
Signed-off-by: Kevin Wang <kevinw@mellanox.com>
* [updategraph] add support to use preset config instead of default minigraph
* Fix variable case
* Remove default minigraph case
* Remove default minigraphs and add default_sku files
* [device][platform] d6254qs d6556 platform porting
[device][platform] sensor and status led support for d7032q28b d7254q28b d7264q28b d6254qs d6556
[device][platform] qos support for d7032q28b d7254q28b
[device][platform] service configuration files for d7032q28b d7254q28b d7264q28b d6254qs d6556
* remove binary files and remove non-supported attributes in config.bcm
* remove gpio-ich here. file a PR in sonic-linux-kernel instead.
* remove unnecessary comments
* add GPL license
* Update ag9032v1 and ag9064 modules.
Signed-off-by: neal tai <neal.tai@deltaww.com>
* Fix the sfputil.py when convert an integer to hexadecimal without the 'L' trailing.
Signed-off-by: neal tai <neal.tai@deltaww.com>
* [platform/haliburton] Fix kernel panic when remove smc module.
* [platform/haliburton] Chanage sysfs to support module interrupt
* [device/haliburton] Update sfputil to use new sysfs.
* [device/haliburton] sfputil to support xcvrd monitoring.
for ecn on/off operations, which are conducted at per queue all interfaces granularity.
TODO:
Ideally, we should have ECN/WRED profile applied at per interface per queue
granularity, and we should do it for all hwskus under the device
directory, not just 7050.
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* update sfputil, port indext start from 1
* DX010 update SKUs port config index
Port index in port_config.ini now start from 1.
* Seastone-DX010-10-50 port config update
* Seastone-DX010-50 port config update
* Seastone-DX010 port config update
* Update dx010 sfputil plugin
* Implement lpmode set function.
* Implement transceiver reset function.
* Python code style format.
* Remove new line at the end of port_config.ini
*New line cause parsing error in sfputilbase.
* Add get_transceiver_change_event method
*This needed by new sfputilbase implement.
* Fix unintended line breaks
* [device]: Modify SFPUtil for inventec-d7032
[device]: Add front panel led support for Inventec-d7032
[platform]: Add transceiver monitor daemon for Inventec-d7032 and Inventec-d7054
* [device] follow new porting guide to have broadcom config under device folder
* remove license
* Added new platform support DellEMC - Z92264f - 64x100
* Includes changes with Makefiles, sfputil, eeprom and default minigraph
* Led support for Z9264f platform
* Includes changes on default minigraph
* ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup
* Upgrade SAI to v1.2.4
* Add a new supported device accton as7116
* Add maintainer info for deb
* Add mk file for accton 7116
* fix some bug for sai 1.2.4
* fix git commit error for sdk and sai
* change sai and sdk deb name
* add config file for qos support
* initial commit
* Delete qos.json
* Delete buffers.json.j2
* Delete qos.json
* Delete buffers.json.j2
* Delete buffers.json.j2
* Delete qos.json
* add support for sai 1.3.0
* add qos and buffer file for device and add sensor driver for 7116
* change buffer template
* [mlnx-sfpplugin] enhancement to support tranceiver sensor monitoring
* Modify the eeprom folder to make it accessably from pmon container
* implement the get_transceiver_change_event API
file change list
modified: device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py
modified: device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py
modified: device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py
modified: device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py
modified: device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py
signed-off-by Liu Kebo kebol@mellanox.com
* remove commented code
* revise the get_transceiver_change_event implementation and remove unused function
* remove blank
* Initial commit
* Add Ingrasys S9180-32X platform dirver.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn.service for init barefoot.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Add some functions and fixed some bugs.
1. Update sensors.conf.
2. Fixed IO expander init.
3. Fixed PSU EEPROM.
4. Fixed MB EEPROM.
5. Add fancontrol and fan init.
6. Add SYS LED control (sys, fan, fan tray).
7. 2.5V compute and setup max and min.
8. Fixed typo MB eeprom delete address.
9. Remove coretemp to BMC.
10. Add active CPLD.
11. Modify SFP+ GPIO slave address.
12. Modify tmp75 Near Port 32 slave address.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn script in /etc/init.d/
Signed-off-by: Wade He <chihen.he@gmail.com>
* Add bfn service in debian
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed CPLD switch LED behavior.
Signed-off-by: Wade He <chihen.he@gmail.com>
* [Barefoot Beta] Fixed sensors and hwmon order.
1. Fixed ignore sensors Vbat.
2. Reorg hwmon order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Fixed PSU1 and PSU2 EEPROM order.
Signed-off-by: Wade He <chihen.he@gmail.com>
* initial barefoot checkin october 2017
* update refpoint
* update refpoints
* update refpoints to bf-master
* update refpoint
* update refpoint to tested version
* change to platform from asic
* update refpoint for swss
* revert core creation setting
* update refpoints
* add telnet for debug shell
* update refpoints 11/17/17
* missed change in file on previous merge
* [CPLD] Fixed blink LED issue.
* Fixed blink LED mask set error.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Update bf_kdrv.c for 6.0.2.39
* Update bf kernel driver
* Add bf_fun kernel module.
* Update bf_tun for fixed build error
* merge with Azure master (12/12/17)
* update swss refpoint
* update refpoint of swss
* library dependency for stack unroll
* update refpoint to bf-master
* [DHCP relay]: Fix circuit ID and remote ID bugs (#1248)
* [DHCP relay]: Fix circuit ID and remote ID bugs
* Set circuit_id_len after setting circuit_id_len to ip->name
* [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272)
* Add I2C CPLD kernel module for psuutil.
* Support psuutil script.
* Add voltage min and max threshold.
* Update sensors.conf for tmp75.
Signed-off-by: Wade He <chihen.he@gmail.com>
* Allow multi platform support - infra (more changes to follow)
* update relative path to include platform for clarity
* [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274)
- What I did
Add switch ASIC vendor: Nephos
Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X
- How I did it
Add platform/nephos files
Add platform/nephos/sonic-platform-modules-ingrasys submodule
Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files
Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files
Add SONiC to support Nephos platform
Update Head of submodule src/sonic-sairedis to "3b817bb"
- How to verify it
To build SONiC installer image and docker images, run the following commands:
make configure PLATFORM=nephos
make target/sonic-nephos.bin
Check system and network feature is worked as well
- Description for the changelog
Add switch ASIC vendor and platforms for Nephos
- A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Sam Yang <yang.kaiyu@gmail.com>
* change source of files to github (from dropbox), update sairedis refpoint
* update refpoint of sairedis
* [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269)
* [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287)
* update sairedis (fast-boot refpoint)
* fix syncd rpc make files
* update refpoint to handle Makefile change (no functional change)
* [Marvell]: Add support for SLM5401-54x device (#1307)
* Marvell's updates for SONiC.201712 & SAI v1.0
* [Platform] Add Marvell's SLM5401-54x for branch 201712
* [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321)
- update Arista 7050-QX32S config.bcm file
- update Accton th-as771*-32x100G.config.bcm files
* update refpoint for Makefile chnage in sairedis
* update refpoint - sairedis
* update sairedis to older refpoint till we debug clean build
* export asic platform for build
* update refpoint for makefiles
* [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332)
* Upload wnc-osw1800
* Modify for Barefoot suggest
* Revert bfn-platform.mk
* Update bfn-platform-wnc.mk
Update parameter name
* Update parameter name
* initial support for WNC platform
* change switch name to "switch"
* Delete bf modules for rel_7_0
* Add Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Modify bfnsdk for Ingrasys S9180 platform
Signed-off-by: Wade He <chihen.he@gmail.com>
* Resolved the conflict.
* Resolved the conflict.
* Update submodule path and url.
* Delete unused file.
* Update PSU GPIO and EEPROM for psuutil.
* Add psuutil in S9180-32X
Signed-off-by: Wade He <chihen.he@gmail.com>
* update refpoint
* update refpoint
* change contact email, update refpoint
* cleanup and update kernel modules
* updates based on review
* update refpoint
* update refpoint
* fix typo in config script to check for platforms
* remove stale file
* resolve conflicts
* cleanup diffs with Azure repo and update SDK debs
* update refpoints to Azure
* address review comments
* revert refpoint of swss-common
* porting the build fix from master
* porting build fix from master
* Minor Fix
* Minor fix
* Temp to sde deb packages url
* Update sonic - sairedis,swss & swss-common refpoints
* Update git modules url path to bfn repo
* updated paths for swss, swss-common & sairedis
* Update refpoint for sonic-swss to local bfn repo
* Update URL for downloading sde debian packages
* porting fix links of debian git server from master
* porting fix links of debian git server from master
* [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC
* Update ref points for swss, swss-common and sairedis repos
* Add sonic platform scripts for bfn montara/maverick
* Call sh scripts instead of calling py scripts
* Address upstream PR Comments (#10)
* Update bf-master with azure/master
* Undo changes to some files
* Revert "Address upstream PR Comments (#10)"
This reverts commit a7fddb83ca.
* Address upstream comments (#11)
* Remove all non bfn specific changes from upstream PR
* Revert "Address upstream comments (#11)"
This reverts commit 559132103e.
* Undo non bfn changes
* Little more cleanup
* Add back code removed in merge
* export CONFIGURED_PLATFORM
* Update sairedis and swss refpoints
* Address Upstream PR comment
* change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64
* Set default tx queue len for usb0 interface to 64
* Update sairedis refpoint
* Update swss ref point
* Add bfn buffer cfg files for montara/maverick as per new design
* Update buffer cfg templates for bfn montara
* add non zero size to buffer profile
* add macro to generate port lists
* Update buffer cfg templates for bfn mavericks
* add non zero size for buffer profiles
* add port generation macro
* Add missing psmisc package
* BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions.
Adding psmisc to resolve this issue.
* Update swss ref point
* Update swss ref point
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update sairedis refpoint
* Update refpoint for sairedis and swss
* sairedis to azure master
* swss to latest bfn bf-master
* Update gitmodules
Update url for sairedis to azure master
* Correct typo in bfn platform script
* Update swss and sairedis ref points
* Update swss ref point
* Address Review comments
* Update swws path in gitmodules to azure master
* update swss refpoint
* update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR)
* Fix sairedis refpoint broken in by previous merge
* Remove psmisc from docker base image
* This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session.
Will fix this in a seperate PR. Need this for SONIC upstreaming
* Address upstream comments
* Remove bmc interface from interface jinja template and sample output interfaces file
* Add bmc interface at boot time to network interfaces for bfn bmc based platforms
* Remove autogen ingrasys debian files
* Revert "Remove autogen ingrasys debian files"
* Buffer and qos config template fix for bfn platforms (#21)
SWI-1509 Buffer and qos config template fix for bfn platforms
* Fix qos config files for montara & mavericks (#22)
* Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs
* Fix vs test (#23)
* Upgrade SAI to v1.2.4
* Add a new supported device accton as7116
* Add maintainer info for deb
* Add mk file for accton 7116
* fix some bug for sai 1.2.4
* fix git commit error for sdk and sai
* change sai and sdk deb name
* add config file for qos support
* initial commit
* Delete qos.json
* Delete buffers.json.j2
* Delete qos.json
* Delete buffers.json.j2
* Delete buffers.json.j2
* Delete qos.json
* add support for sai 1.3.0
This commit updates the shared headroom value for z9100
T0 and T1 profile based on the ratio. The ratio is derived
from the 40G broadcom recommended XL Sheet.
Unit tested the above configuration by dumping the registers
for the shared headroom. The shared headroom values in registers
reflects the correct new values for both T1 and T0.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* Update sensors.conf for 7050QX-32 and 7050QX-32S
These two platforms were using a previous version of a kernel driver.
The new one names the i2c buses differently.
We therefore need to rename them here.
* Fix the default minigraph for the 7050QX-32S
The interface offset is invalid which makes sonic-cfggen generate an
invalid config_db.jon in rc.local.
This config then silently makes orchagent/syncd fail.
* Use the partition on which sonic-aboot.swi is
Instead of always assuming /mnt/flash, use the partition where the image
to be installed lies.
This allow for the image to be on any partition.
Move the ingress lossless profile from buffers.json.j2 to pg_profile_lookup.ini
Move pool and the rest of the profile from buffers.json.j2 to
buffers_defaults_t1.j2
Add port speed info in port_config.ini
Make buffers_default_t1.j2 the default profile in buffers.json.j2
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* First part of skipping not used port for qos configuration
* Use active ports only to set QoS parameters for 6100
* Add a test for qos.json.j2
* Add a test for Dell S6100 buffers.json template
* Update submodulre
* Add Broadcom config files for Arista-7050-QX32 and Arista-7050-Q16S64 SKUs under respective directories
* Remove 'serdes_firmware_mode_xe=0x1' line from Arista 7050 Broadcom config files
This commit adds new code to support z9100 PFC T1 support with
broadcom recommended MMU settings for PFC feature.
Unit tested the setting by loading sonic-broadcom.bin and checking
the hardware for the values from the JSON file. Added the config.bcm
file th-z9100-32x100G.config.bcm to this folder and updated the
sai.profile file to point to hwsku directory. sai.profile now
points to /usr/share/sonic/hwsku/th-z9100-32x100G.config.bcm
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
This commit adds new code to support z9100 PFC T0 support with
broadcom recommended MMU settings for PFC feature.
Unit tested the setting by loading sonic-broadcom.bin and checking
the hardware for the values from the JSON file. The T0 configs supports
fan-out of 100G ports on Z9100. Added new config.bcm for fanout of 100G
ports and tested the fanout by sending traffic using bcmcmd, new config.bcm
file will be copied to /usr/share/sonic/hwsku/th-z9100-8x100-48x50G.config.bcm.
The sai.profile file is updated to point to hwsku directory.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
* [test] Adding Broadcom configuration file test
In order to allow SONiC community to check in Broadcom configuration
file directly under device folder. We need to add this test to make
sure the contents of the configuration is compliant with Broadcom
specifications.
* Invoke test from Debian package builder
* Use $() syntax
* Remove the debug echo statement
This commit updates the pg_profile_lookuip.ini file with
correct xoff values for 50G. 25G/40m xoff value is updated
to reflect the correct value.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@dell.com>
