- Why I did it
Optimize syslog rate limit feature for fast and warm boot
- How I did it
Optimize redis start time
Don't render rsyslog.conf in container startup script
Disable containercfgd by default. There is a new CLI to enable it (in another PR)
- How to verify it
Manual test
Regression test
- Why I did it
Add the YANG model according to Smart Switch IP address assignment HDL.
- How I did it
Implement new YANG model containers.
- How to verify it
Run YANG model unit tests. The changes add new unit tests to cover new functionality.
Fix the fsck check which is not working. Potentially fixes#16938
Modified fsck script to run on the ext4.fsck on the appropriate disk where SONiC resides
Microsoft ADO: 26098631
#### Why I did it
src/sonic-platform-common
```
* c82ae54 - (HEAD -> master, origin/master, origin/HEAD) Implementing set_optoe_write_timeout API (#422) (8 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-sairedis
```
* e849160 - (HEAD -> master, origin/master, origin/HEAD) [vslib] add support for ACL table available entry/counter attributes (#1333) (9 hours ago) [Yakiv Huryk]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 5f367ebb - (HEAD -> master, origin/master, origin/HEAD) [dash] reduce the memory used by DASH ACL rules (#2984) (8 hours ago) [Yakiv Huryk]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
For CMIS host management module, we need a different implementation for sfp.reset. This PR is to implement it
- How I did it
For SW control modules, do reset from hw_reset
For FW control modules, do reset as the original way
- How to verify it
Manual test
sonic-mgmt platform test
### Why I did it
Github issue: https://github.com/sonic-net/sonic-buildimage/issues/16356. The YANG definition breaks GCU feature.
We can either update sonic_yang and GCU's search algorithm to enable the same key count case or simply update YANG model to solve the issue.
The pros for update YANG model are it could solve the issue directly and we don't need to handle the complicate search algorithm in sonic_yang and GCU. This is the only YANG model that has this issue.
### How I did it
Combine two list into one. The previous YANG validation unit tests are still applicable.
#### How to verify it
Unit test and E2E test
Why I did it
Fan tolerance checking is done through new APIs, is_under_speed and is_over_speed, which populate corresponding fields into the database. speed_tolerance is no longer used and was removed, but system-health was not updated and indicates failures:
ADO: 25279165
root@sonic/# show system-health summary
System status summary
System status LED red_blink
Services:
Status: OK
Hardware:
Status: Not OK
Reasons: Failed to get speed tolerance for fantray5.fan1
Failed to get speed tolerance for fantray5.fan0
Failed to get speed tolerance for fantray4.fan1
Failed to get speed tolerance for fantray4.fan0
Failed to get speed tolerance for fantray3.fan1
Failed to get speed tolerance for fantray3.fan0
Failed to get speed tolerance for fantray2.fan1
Failed to get speed tolerance for fantray2.fan0
Failed to get speed tolerance for fantray1.fan1
Failed to get speed tolerance for fantray1.fan0
Failed to get speed tolerance for fantray0.fan1
Failed to get speed tolerance for fantray0.fan0
Failed to get speed tolerance for PSU1.fan0
Failed to get speed tolerance for PSU0.fan0
How I did it
Updated hardware_checker.py in system-health to consume new is_under_speed and is_over_speed database entries instead of speed_tolerance and hard-coded calculations.
How to verify it
root@sonic:/# show system-health summary
System status summary
System status LED green
Services:
Status: OK
Hardware:
Status: OK
Why I did it
Enable sonic-restapi build in two platform to avoid build break on restapi target.
Work item tracking
Microsoft ADO (number only): 26048426
How I did it
How to verify it
#### Why I did it
src/sonic-swss
```
* ff524e6d - (HEAD -> master, origin/master, origin/HEAD) [dash] add a retry for an ACL rule creation if a tag is not created yet (#2972) (7 hours ago) [Yakiv Huryk]
* 620db3da - [ci] Allow partially success build artifact in PR checker pipeline. #2986 (3 days ago) [Liu Shilong]
* d357e6f1 - [copporch] Add safeguard during policer attribute update (#2977) (4 days ago) [Vivek]
* cb460394 - [fpmsyncd][WR] Relax the static schema constraint for ROUTE_TABLE (#2981) (5 days ago) [Vivek]
* a1ce21f6 - Change base directory referenced in coverage.xml (#2976) (6 days ago) [Lawrence Lee]
* 920959cf - [Dash] [UT] Add ZMQ test case for dash (#2967) (6 days ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Fix zebra leaking memory with fib suppress enabled. Porting the fix from
FRRouting/frr#14983
While running test_stress_route.py, systems with lower memory started to throw low memory logs. On further investigation, a memory leak has been found in zebra which was fixed in the FRR community.
#### Why I did it
src/sonic-gnmi
```
* 88e82d4 - (HEAD -> master, origin/master, origin/HEAD) Replace PFC_WD_TABLE with PFC_WD (#173) (8 days ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
New implementation of Nvidia platform_wait due to:
1. sysfs deprecated by hw-mgmt
2. new dependencies to SDK
3. For CMIS host management mode
- How I did it
wait hw-management ready
wait SDK sysfs nodes ready
- How to verify it
manual test
unit test
sonic-mgmt regression
- Why I did it
Fix issue xcvrd crashes due to cannot import name 'initialize_sfp_thermal':
Nov 27 09:47:16.388639 sonic ERR pmon#xcvrd: Exception occured at CmisManagerTask thread due to ImportError("cannot import name 'initialize_sfp_thermal' from partially initialized module 'sonic_platform.thermal' (most likely due to a circular import) (/usr/local/lib/python3.9/dist-packages/sonic_platform/thermal.py)")
- How I did it
Add lock for creating SFP object
- How to verify it
Unit test
Manual Test
#### Why I did it
src/linkmgrd
```
* 79c3872 - (HEAD -> master, origin/master, origin/HEAD) [active-standby] Fix `show mux status` inconsistency introduced by orchagent rollback (#225) (24 hours ago) [Jing Zhang]
* ba913c0 - [warmboot] use config_db connector to update mux mode config instead of CLI (#223) (2 days ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
To fix BIOS firmware update after fresh image installation from ONiE
- How I did it
Initialized empty GRUB environment file after ONiE installation
- How to verify it
Install image from ONiE
Run BIOS firmware upgrade
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
The issue is related to #16812. Process syncd does not run in the container gbsyncd on kvm sonic with default hwsku.
Microsoft ADO : 26151608
How I did it
If syncd has not run in container gbsyncd, it is not needed to trigger graceful shudown of syncd.
How to verify it
None of syncd_request_shutdown coredump in config reload on KVM sonic
- Why I did it
When module is totally under software control, driver cannot get module temperature/temperature threshold from firmware. In this case, sonic needs to get temperature/temperature threshold from EEPROM. In this PR, a thread thermal updater is created to update module temperature/temperature threshold while software control is enabled.
- How I did it
Query ASIC temperature from SDK sysfs and update hw-management-tc periodically
Query Module temperature from EEPROM and update hw-management-tc periodically
- How to verify it
Manual test
New Unit tests
- Why I did it
When module is under software control (CMIS host management enabled), EEPROM should be controlled by software and there should be no limitation for any write operation.
- How I did it
Remove EEPROM write limitation if a module is under software control
- How to verify it
Manual test
UT
- Why I did it
Update SAI version to SAIBuild2311.26.0.28
Fixed issues
1. Traffic with unicast destination ip and multicast destination mac wasn't properly dropped
2. When working with SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD key/value enabled, trying to add a LAG member to a LAG which is created after warm boot initial configuration phase ended, will fail.
3. Optional feature of Port IP counters (SAI_PORT_STAT_IP*) , enabled by SAI XML per-port-ip-counter-enabled config node, wasn't initialized properly.
4. Creating BFD session for non default VRF fails (SAI_BFD_SESSION_ATTR_VIRTUAL_ROUTER != SAI_SWITCH_ATTR_DEFAULT_VIRTUAL_ROUTER_ID).
5. The default value for port FEC during switch init for Spectrum3 was initialized as 'auto' and not aligned to SAI header default 'none'. Note if setups has invalid configuration and relied previously on auto, now it might be necessary for the user to provide explicit valid value for SAI_PORT_ATTR_FEC_MODE
Update SDK/FW version to 4.6.2134/2012.2134
Fixed issues:
1. Updated SN3700C to enable limit to 100G speed.
2. Recovering from Low power mode might ends with port down.
- How I did it
Updating the versions in makefile
- How to verify it
Confirm issues fixed and run sonic-mgmt tests
### Why I did it
Current YANG model of sonic-events-swss:chk_crm_threshold has the type uint8 for leaf used_cnt which is too small of a range to hold values of used_cnt which can greatly exceed that. Updating leaf type of used_cnt and free_cnt to match defined definition.
Changed to uint32 as per defined here: https://github.com/sonic-net/sonic-swss/blob/master/orchagent/crmorch.h#L99
##### Work item tracking
- Microsoft ADO **(number only)**:26091912
#### How I did it
Update leaf value
#### How to verify it
UT and sonic-mgmt PR checker
- Why I did it
For cmis host management mode, the prevous sysfs cannot be used for low power mode setting. This PR reuses existing low power mode implementation in sonic_xcvr package when CMIS host management mode is enabled
- How I did it
Use sonic_xcvr low power mode implementation when CMIS host management mode is enabled.
- How to verify it
Manual test for CMIS host management mode
Regression test for old mode and backward compatible test
- Why I did it
To add new SKU Mellanox-SN4700-O8V48 with following requirements:
- How I did it
Create new SKU files based on the below definition:
* Port Mapping: 1-12 2x200G, 13-20 1x400G, 21-32 2x200G
T0 topology: 48x200G Downlinks 8x400G uplinks.
Length of downlink: 5m
Length of uplink: 40m
* Auto-negotiation enable/disable: Yes
* FEC mode: RS
* Shared headroom: Enabled
* Shared headroom pool factor: 2
* Warmboot enabled: yes
- How to verify it
SONiC build with new SKU finish init, all ports up, qos tests suite from sonic-mgmt
A W/A to overcome delay of about 20 sec on login due to MFT bash autocompletion bug.
Should be reverted once a formal solution will be available in future MFT release.
- Why I did it
To overcome SN2700 20 sec delay on login
- How I did it
Removed MFT bash autocompletion part
- How to verify it
1. Build a mellanox image
2. Verify no such links after system boot.
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
FCS/CRC Errors will only be reported as RX_ERR.
Fix to avoid the mac port related errors.
Fix for sharedResSize testcase failure in QoS-SAI
Fix the issue related to voltage in 'show platform psustatus'.
Support WRED drop for lossy queues.
Fixed an issue where lossy traffic was getting dropped.
Enhancement of SAI logging for errors and interrupts
To modify EEPROM API serial_number_str to return service tag instead of serial number in Dell S6100.
Ref PR: #1239
How I did it
Update EEPROM API serial_number_str to return service tag instead of serial number.
How to verify it
Verify decode-syseeprom -s returns service tag in Dell S6100.
Why I did it
1. Upgrade centec-arm64 platform to Bookworm.
2. Solve the problem of compiling the docker-syncd-centec-rpc.gz error on the centec platform.
How I did it
1. Modified platform driver to comply with bookworm kernel.
2. Upgrade SONiC package versions of the centec platform.
How to verify it
1. Compile the centec-arm64 platform to generate sonic-centec-arm64.bin.
2. Compile the centec platform to generate docker-syncd-centec-rpc.gz.
Signed-off-by: centecqianj <qianj@centec.com>
- Why I did it
Add support of a new 't1-smartswitch' topology to the sample config generator. The topology passed to sonic-cfggen utility as a parameter to generate sample configuration for Smart Switch:
sonic-cfggen -k <SKU> --preset t1-smartswitch ...
- How I did it
Extend sample config generator to support new topology and read Smart Switch specific data from hwsku.json.
- How to verify it
Run unit tests. The changes are covered with the new unit tests.
- Why I did it
Improve boot performance mostly needed for fast and warmboot
- How I did it
Use cached variable.
- How to verify it
Boot the system. Simply do "systemd-analyze blame" and look at service start time.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
