Optimize syslog rate limit feature for fast and warm boot (#17458)

- Why I did it
Optimize syslog rate limit feature for fast and warm boot

- How I did it
Optimize redis start time
Don't render rsyslog.conf in container startup script
Disable containercfgd by default. There is a new CLI to enable it (in another PR)

- How to verify it
Manual test
Regression test

dockers/docker-base-bullseye/Dockerfile.j2

@@ -119,10 +119,10 @@ RUN apt-get clean -y                     && \
     apt-get autoremove -y                && \
     rm -rf /var/lib/apt/lists/* /tmp/* ~/.cache
 
+COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"]
 COPY ["etc/rsyslog.d/*", "/etc/rsyslog.d/"]
 COPY ["root/.vimrc", "/root/.vimrc"]
 
 RUN ln /usr/bin/vim.tiny /usr/bin/vim
 
 COPY ["etc/supervisor/supervisord.conf", "/etc/supervisor/"]
-COPY ["etc/supervisor/containercfgd.conf", "/etc/supervisor/conf.d/"]

dockers/docker-base-bullseye/etc/rsyslog.conf

@@ -0,0 +1,78 @@
+#
+#  /etc/rsyslog.conf    Configuration file for rsyslog.
+#
+#                       For more information see
+#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
+
+
+#################
+#### MODULES ####
+#################
+
+$ModLoad imuxsock # provides support for local system logging
+
+#
+# Set a rate limit on messages from the container
+#
+$SystemLogRateLimitInterval 300
+$SystemLogRateLimitBurst 20000
+
+#$ModLoad imklog  # provides kernel logging support
+#$ModLoad immark  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
+# Set remote syslog server
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
+
+#
+# Use traditional timestamp format.
+# To enable high precision timestamps, comment out the following line.
+#
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# Define a custom template
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$ActionFileDefaultTemplate SONiCFileFormat
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+#
+# Suppress duplicate messages and report "message repeated n times"
+#
+$RepeatedMsgReduction on
+
+###############
+#### RULES ####
+###############

dockers/docker-base-buster/Dockerfile.j2

@@ -118,10 +118,10 @@ RUN apt-get clean -y                     && \
     apt-get autoremove -y                && \
     rm -rf /var/lib/apt/lists/* /tmp/* ~/.cache/
 
+COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"]
 COPY ["etc/rsyslog.d/*", "/etc/rsyslog.d/"]
 COPY ["root/.vimrc", "/root/.vimrc"]
 
 RUN ln /usr/bin/vim.tiny /usr/bin/vim
 
 COPY ["etc/supervisor/supervisord.conf", "/etc/supervisor/"]
-COPY ["etc/supervisor/containercfgd.conf", "/etc/supervisor/conf.d/"]

dockers/docker-base-buster/etc/rsyslog.conf

@@ -0,0 +1,78 @@
+#
+#  /etc/rsyslog.conf    Configuration file for rsyslog.
+#
+#                       For more information see
+#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
+
+
+#################
+#### MODULES ####
+#################
+
+$ModLoad imuxsock # provides support for local system logging
+
+#
+# Set a rate limit on messages from the container
+#
+$SystemLogRateLimitInterval 300
+$SystemLogRateLimitBurst 20000
+
+#$ModLoad imklog  # provides kernel logging support
+#$ModLoad immark  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
+# Set remote syslog server
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
+
+#
+# Use traditional timestamp format.
+# To enable high precision timestamps, comment out the following line.
+#
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# Define a custom template
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$ActionFileDefaultTemplate SONiCFileFormat
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+#
+# Suppress duplicate messages and report "message repeated n times"
+#
+$RepeatedMsgReduction on
+
+###############
+#### RULES ####
+###############

dockers/docker-base-buster/etc/supervisor/containercfgd.conf

@@ -1,9 +0,0 @@
-[program:containercfgd]
-command=python3 /usr/local/bin/containercfgd
-priority=99
-autostart=false
-autorestart=unexpected
-stdout_logfile=syslog
-stderr_logfile=syslog
-dependent_startup=true
-dependent_startup_wait_for=rsyslogd:running

dockers/docker-base-stretch/Dockerfile.j2

@@ -114,10 +114,10 @@ RUN apt-get clean -y                     && \
     apt-get autoremove -y                && \
     rm -rf /var/lib/apt/lists/* /tmp/*
 
+COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"]
 COPY ["etc/rsyslog.d/*", "/etc/rsyslog.d/"]
 COPY ["root/.vimrc", "/root/.vimrc"]
 
 RUN ln /usr/bin/vim.tiny /usr/bin/vim
 
 COPY ["etc/supervisor/supervisord.conf", "/etc/supervisor/"]
-COPY ["etc/supervisor/containercfgd.conf", "/etc/supervisor/conf.d/"]

dockers/docker-base-stretch/etc/rsyslog.conf

@@ -0,0 +1,78 @@
+#
+#  /etc/rsyslog.conf    Configuration file for rsyslog.
+#
+#                       For more information see
+#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
+
+
+#################
+#### MODULES ####
+#################
+
+$ModLoad imuxsock # provides support for local system logging
+
+#
+# Set a rate limit on messages from the container
+#
+$SystemLogRateLimitInterval 300
+$SystemLogRateLimitBurst 20000
+
+#$ModLoad imklog  # provides kernel logging support
+#$ModLoad immark  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
+# Set remote syslog server
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
+
+#
+# Use traditional timestamp format.
+# To enable high precision timestamps, comment out the following line.
+#
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# Define a custom template
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$ActionFileDefaultTemplate SONiCFileFormat
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+#
+# Suppress duplicate messages and report "message repeated n times"
+#
+$RepeatedMsgReduction on
+
+###############
+#### RULES ####
+###############

dockers/docker-base-stretch/etc/supervisor/containercfgd.conf

@@ -1,9 +0,0 @@
-[program:containercfgd]
-command=python /usr/local/bin/containercfgd
-priority=99
-autostart=false
-autorestart=unexpected
-stdout_logfile=syslog
-stderr_logfile=syslog
-dependent_startup=true
-dependent_startup_wait_for=rsyslogd:running

dockers/docker-base/Dockerfile.j2

@@ -50,6 +50,7 @@ RUN apt-get -y install \
     rsyslog            \
     less
 
+COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"]
 COPY ["etc/rsyslog.d/*", "/etc/rsyslog.d/"]
 COPY ["root/.vimrc", "/root/.vimrc"]
 
@@ -68,7 +69,6 @@ RUN mkdir -p /etc/supervisor/conf.d
 RUN mkdir -p /var/log/supervisor
 
 COPY ["etc/supervisor/supervisord.conf", "/etc/supervisor/"]
-COPY ["etc/supervisor/containercfgd.conf", "/etc/supervisor/conf.d/"]
 
 RUN apt-get -y purge   \
     exim4              \

dockers/docker-base/etc/rsyslog.conf

@@ -0,0 +1,78 @@
+#
+#  /etc/rsyslog.conf    Configuration file for rsyslog.
+#
+#                       For more information see
+#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
+
+
+#################
+#### MODULES ####
+#################
+
+$ModLoad imuxsock # provides support for local system logging
+
+#
+# Set a rate limit on messages from the container
+#
+$SystemLogRateLimitInterval 300
+$SystemLogRateLimitBurst 20000
+
+#$ModLoad imklog  # provides kernel logging support
+#$ModLoad immark  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
+# Set remote syslog server
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
+
+#
+# Use traditional timestamp format.
+# To enable high precision timestamps, comment out the following line.
+#
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# Define a custom template
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$ActionFileDefaultTemplate SONiCFileFormat
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+#
+# Suppress duplicate messages and report "message repeated n times"
+#
+$RepeatedMsgReduction on
+
+###############
+#### RULES ####
+###############

dockers/docker-base/etc/supervisor/containercfgd.conf

@@ -1,9 +0,0 @@
-[program:containercfgd]
-command=python /usr/local/bin/containercfgd
-priority=99
-autostart=false
-autorestart=unexpected
-stdout_logfile=syslog
-stderr_logfile=syslog
-dependent_startup=true
-dependent_startup_wait_for=rsyslogd:running

dockers/docker-database/supervisord.conf.j2

@@ -39,12 +39,10 @@ dependent_startup=true
 command=/bin/bash -c "{ [[ -s /var/lib/{{ redis_inst }}/dump.rdb ]] || rm -f /var/lib/{{ redis_inst }}/dump.rdb; } && mkdir -p /var/lib/{{ redis_inst }} && exec /usr/bin/redis-server /etc/redis/redis.conf --bind {{ LOOPBACK_IP }} {{ redis_items['hostname'] }} --port {{ redis_items['port'] }} --unixsocket {{ redis_items['unix_socket_path'] }} --pidfile /var/run/redis/{{ redis_inst }}.pid --dir /var/lib/{{ redis_inst }}"
 priority=2
 user=redis
-autostart=false
+autostart=true
 autorestart=false
 stdout_logfile=syslog
 stderr_logfile=syslog
-dependent_startup=true
-dependent_startup_wait_for=rsyslogd:running
 {%     endfor %}
 {% endif %}
 

dockers/docker-platform-monitor/Dockerfile.j2

@@ -89,6 +89,7 @@ COPY ["docker-pmon.supervisord.conf.j2", "docker_init.j2", "/usr/share/sonic/tem
 COPY ["ssd_tools/*", "/usr/bin/"]
 COPY ["files/supervisor-proc-exit-listener", "/usr/bin"]
 COPY ["critical_processes", "/etc/supervisor"]
+COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"]
 
 RUN sonic-cfggen -a "{\"CONFIGURED_PLATFORM\":\"{{CONFIGURED_PLATFORM}}\"}" -t /usr/share/sonic/templates/docker_init.j2 > /usr/bin/docker_init.sh
 RUN rm -f /usr/share/sonic/templates/docker_init.j2

dockers/docker-platform-monitor/etc/rsyslog.conf

@@ -0,0 +1,88 @@
+#
+#  /etc/rsyslog.conf    Configuration file for rsyslog.
+#
+#                       For more information see
+#                       /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html
+
+
+#################
+#### MODULES ####
+#################
+
+$ModLoad imuxsock # provides support for local system logging
+
+#
+# Set a rate limit on messages from the container
+#
+$SystemLogRateLimitInterval 300
+$SystemLogRateLimitBurst 20000
+
+#$ModLoad imklog  # provides kernel logging support
+#$ModLoad immark  # provides --MARK-- message capability
+
+# provides UDP syslog reception
+#$ModLoad imudp
+#$UDPServerRun 514
+
+# provides TCP syslog reception
+#$ModLoad imtcp
+#$InputTCPServerRun 514
+
+
+###########################
+#### GLOBAL DIRECTIVES ####
+###########################
+
+set $.PLATFORM=getenv("PLATFORM");
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
+if ($.PLATFORM == "x86_64-mlnx_msn2700-r0" or $.PLATFORM == "x86_64-mlnx_msn2700a1-r0" or $.PLATFORM == "x86_64-mlnx_msn2410-r0") then {
+
+# This rsyslog configuration is intended to resolve the following error message that only appears on the MSN2700 and MSN2410 platforms:
+# "ERR pmon#sensord: Error getting sensor data: dps460/#10: Can't read"
+# This error is because of firmware issue with some type of PSU, we are not able to upgrade the FW online.
+# Since there is no functional impact, this error log can be ignored safely.
+if $programname contains "sensord" and $msg contains "Error getting sensor data: dps460/#" then stop
+}
+
+# Set remote syslog server
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
+
+#
+# Use traditional timestamp format.
+# To enable high precision timestamps, comment out the following line.
+#
+#$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
+
+# Define a custom template
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$ActionFileDefaultTemplate SONiCFileFormat
+
+#
+# Set the default permissions for all log files.
+#
+$FileOwner root
+$FileGroup adm
+$FileCreateMode 0640
+$DirCreateMode 0755
+$Umask 0022
+
+#
+# Where to place spool and state files
+#
+$WorkDirectory /var/spool/rsyslog
+
+#
+# Include all config files in /etc/rsyslog.d/
+#
+$IncludeConfig /etc/rsyslog.d/*.conf
+
+#
+# Suppress duplicate messages and report "message repeated n times"
+#
+$RepeatedMsgReduction on
+
+###############
+#### RULES ####
+###############

files/build_templates/docker_image_ctl.j2

@@ -34,27 +34,16 @@ function updateSyslogConf()
     # Also update the container name
     if [[ ($NUM_ASIC -gt 1) ]]; then
         TARGET_IP=$(docker network inspect bridge --format={{ "'{{(index .IPAM.Config 0).Gateway}}'" }})
-    else
-        if [ "$CONTAINER_EXISTS" = "yes" ]; then
-            # database configuration has been synced to /etc/rsyslog.conf
-            # no need generate it to save boot time
-            return
-        fi
-        TARGET_IP="127.0.0.1"
+        CONTAINER_NAME="$DOCKERNAME"
+        TMP_FILE="/tmp/rsyslog.$CONTAINER_NAME.conf"
+        {%- if docker_container_name == "database" %}
+        python -c "import jinja2, os; paths=['/usr/share/sonic/templates']; loader = jinja2.FileSystemLoader(paths); env = jinja2.Environment(loader=loader, trim_blocks=True); template_file='/usr/share/sonic/templates/rsyslog-container.conf.j2'; template = env.get_template(os.path.basename(template_file)); data=template.render({\"target_ip\":\"$TARGET_IP\",\"container_name\":\"$CONTAINER_NAME\"}); print(data)" > $TMP_FILE
+        {%- else %}
+        sonic-cfggen -t /usr/share/sonic/templates/rsyslog-container.conf.j2 -a "{\"target_ip\": \"$TARGET_IP\", \"container_name\": \"$CONTAINER_NAME\" }"  > $TMP_FILE
+        {%- endif %}
+        docker cp $TMP_FILE ${DOCKERNAME}:/etc/rsyslog.conf
+        rm -rf $TMP_FILE
     fi
-    CONTAINER_NAME="$DOCKERNAME"
-    TMP_FILE="/tmp/rsyslog.$CONTAINER_NAME.conf"
-    {%- if docker_container_name == "database" %}
-    python -c "import jinja2, os; paths=['/usr/share/sonic/templates']; loader = jinja2.FileSystemLoader(paths); env = jinja2.Environment(loader=loader, trim_blocks=True); template_file='/usr/share/sonic/templates/rsyslog-container.conf.j2'; template = env.get_template(os.path.basename(template_file)); data=template.render({\"target_ip\":\"$TARGET_IP\",\"container_name\":\"$CONTAINER_NAME\"}); print(data)" > $TMP_FILE
-    {%- else %}
-    sonic-cfggen -d -t /usr/share/sonic/templates/rsyslog-container.conf.j2 -a "{\"target_ip\": \"$TARGET_IP\", \"container_name\": \"$CONTAINER_NAME\", \"platform\": \"$PLATFORM\" }"  > $TMP_FILE
-    if [ $? -ne 0 ]; then
-      echo "Error: Execute sonic-cfggen -d failed. Execute without '-d'."
-      sonic-cfggen -t /usr/share/sonic/templates/rsyslog-container.conf.j2 -a "{\"target_ip\": \"$TARGET_IP\", \"container_name\": \"$CONTAINER_NAME\", \"platform\": \"$PLATFORM\" }"  > $TMP_FILE
-    fi
-    {%- endif %}
-    docker cp $TMP_FILE ${DOCKERNAME}:/etc/rsyslog.conf
-    rm -rf $TMP_FILE
 }
 function ebtables_config()
 {
@@ -326,13 +315,18 @@ start() {
     # Obtain our platform as we will mount directories with these names in each docker
     PLATFORM=${PLATFORM:-`$SONIC_CFGGEN -H -v DEVICE_METADATA.localhost.platform`}
 
-
     # Parse the device specific asic conf file, if it exists
     ASIC_CONF=/usr/share/sonic/device/$PLATFORM/asic.conf
     if [ -f "$ASIC_CONF" ]; then
         source $ASIC_CONF
     fi
 
+    # Default rsyslog target IP for single ASIC platform
+    SYSLOG_TARGET_IP=127.0.0.1
+    if [[ ($NUM_ASIC -gt 1) ]]; then
+        SYSLOG_TARGET_IP=$(docker network inspect bridge --format={{ "'{{(index .IPAM.Config 0).Gateway}}'" }})
+    fi
+
     PLATFORM_ENV_CONF=/usr/share/sonic/device/$PLATFORM/platform_env.conf
     if [ -f "$PLATFORM_ENV_CONF" ]; then
         source $PLATFORM_ENV_CONF
@@ -646,6 +640,8 @@ start() {
         --env "NAMESPACE_COUNT"="$NUM_ASIC" \
         --env "DEV"="$DEV" \
         --env "CONTAINER_NAME"=$DOCKERNAME \
+        --env "SYSLOG_TARGET_IP"=$SYSLOG_TARGET_IP \
+        --env "PLATFORM"=$PLATFORM \
         --name=$DOCKERNAME \
 {%- if docker_container_name == "gbsyncd" %}
         -v /var/run/docker-syncd$DEV:/var/run/sswsyncd \

files/build_templates/sonic_debian_extension.j2

@@ -407,6 +407,9 @@ sudo cp $IMAGE_CONFIGS/rsyslog/rsyslog-container.conf.j2 $FILESYSTEM_ROOT_USR_SH
 sudo cp $IMAGE_CONFIGS/rsyslog/rsyslog.d/* $FILESYSTEM_ROOT/etc/rsyslog.d/
 echo "rsyslog-config.service" | sudo tee -a $GENERATED_SERVICE_FILE
 
+# Copy containercfgd configuration files
+sudo cp $IMAGE_CONFIGS/containercfgd/containercfgd.conf $FILESYSTEM_ROOT_USR_SHARE_SONIC_TEMPLATES/
+
 # Copy syslog override files
 sudo mkdir -p $FILESYSTEM_ROOT/etc/systemd/system/syslog.socket.d
 sudo cp $IMAGE_CONFIGS/syslog/override.conf $FILESYSTEM_ROOT/etc/systemd/system/syslog.socket.d/override.conf

files/image_config/rsyslog/rsyslog-container.conf.j2

@@ -52,21 +52,26 @@ $SystemLogRateLimitBurst 20000
 ###########################
 #### GLOBAL DIRECTIVES ####
 ###########################
+
+set $.PLATFORM=getenv("PLATFORM");
+set $.CONTAINER_NAME=getenv("CONTAINER_NAME");
+
 {% if container_name == 'pmon' %}
-{% if platform == 'x86_64-mlnx_msn2700-r0' or platform == 'x86_64-mlnx_msn2700a1-r0' or platform == 'x86_64-mlnx_msn2410-r0' %}
 
 # This rsyslog configuration is intended to resolve the following error message that only appears on the MSN2700 and MSN2410 platforms:
 # "ERR pmon#sensord: Error getting sensor data: dps460/#10: Can't read"
 # This error is because of firmware issue with some type of PSU, we are not able to upgrade the FW online.
 # Since there is no functional impact, this error log can be ignored safely.
 
-if $programname contains "sensord" and $msg contains "Error getting sensor data: dps460/#" then stop
+if ($.PLATFORM == "x86_64-mlnx_msn2700-r0" or $.PLATFORM == "x86_64-mlnx_msn2700a1-r0" or $.PLATFORM == "x86_64-mlnx_msn2410-r0") then {
+    if $programname contains "sensord" and $msg contains "Error getting sensor data: dps460/#" then stop
+}
 
 {% endif %}
-{% endif %}
+
 # Set remote syslog server
-template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% {{container_name}}#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
-*.* action(type="omfwd" target="{{target_ip}}" port="514" protocol="udp" Template="ForwardFormatInContainer")
+template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAMP:::date-rfc3339% %HOSTNAME% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg%")
+*.* action(type="omfwd" target=`echo $SYSLOG_TARGET_IP` port="514" protocol="udp" Template="ForwardFormatInContainer")
 
 #
 # Use traditional timestamp format.
@@ -75,7 +80,7 @@ template (name="ForwardFormatInContainer" type="string" string="<%PRI%>%TIMESTAM
 #$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
 
 # Define a custom template
-$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% {{container_name}}#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
+$template SONiCFileFormat,"%TIMESTAMP%.%timestamp:::date-subseconds% %HOSTNAME% %syslogseverity-text:::uppercase% %$.CONTAINER_NAME%#%syslogtag%%msg:::sp-if-no-1st-sp%%msg:::drop-last-lf%\n"
 $ActionFileDefaultTemplate SONiCFileFormat
 
 #

src/sonic-containercfgd/containercfgd/containercfgd.py

@@ -1,3 +1,6 @@
+from swsscommon.swsscommon import RestartWaiter
+RestartWaiter.waitAdvancedBootDone()
+
 import os
 import re
 import signal
@@ -5,7 +8,7 @@ import subprocess
 import sys
 
 from sonic_py_common import daemon_base, logger
-from swsscommon.swsscommon import ConfigDBConnector, RestartWaiter
+from swsscommon.swsscommon import ConfigDBConnector
 
 SYSLOG_IDENTIFIER = "containercfgd"
 logger = logger.Logger(SYSLOG_IDENTIFIER)
@@ -101,10 +104,9 @@ class SyslogHandler:
     # Regular expressions to extract value from rsyslog.conf
     INTERVAL_PATTERN = '.*SystemLogRateLimitInterval\s+(\d+).*'
     BURST_PATTERN = '.*SystemLogRateLimitBurst\s+(\d+).*'
-    TARGET_IP_PATTERN = '.*target="(.*?)".*'
 
     def __init__(self):
-        self.current_interval, self.current_burst, self.target_ip = self.parse_syslog_conf()
+        self.current_interval, self.current_burst = self.parse_syslog_conf()
 
     def handle_config(self, table, key, data):
         """Handle CONFIG DB change. Callback by ConfigDBConnector.
@@ -149,7 +151,7 @@ class SyslogHandler:
         if os.path.exists(self.TMP_SYSLOG_CONF_PATH):
             os.remove(self.TMP_SYSLOG_CONF_PATH)
         with open(self.TMP_SYSLOG_CONF_PATH, 'w+') as f:
-            json_args = f'{{"target_ip": "{self.target_ip}", "container_name": "{container_name}" }}'
+            json_args = f'{{"container_name": "{container_name}" }}'
             output = run_command(['sonic-cfggen', '-d', '-t', '/usr/share/sonic/templates/rsyslog-container.conf.j2', '-a', json_args])
             f.write(output)
         run_command(['cp', self.TMP_SYSLOG_CONF_PATH, self.SYSLOG_CONF_PATH])
@@ -161,11 +163,10 @@ class SyslogHandler:
         """Passe existing syslog conf and extract config values
 
         Returns:
-            tuple: interval,burst,target_ip
+            tuple: interval,burst
         """
         interval = '0'
         burst = '0'
-        target_ip = None
 
         with open(self.SYSLOG_CONF_PATH, 'r') as f:
             content = f.read()
@@ -179,15 +180,10 @@ class SyslogHandler:
                 burst = match.group(1)
                 break
 
-            pattern = re.compile(self.TARGET_IP_PATTERN)
-            for match in pattern.finditer(content):
-                target_ip = match.group(1)
-                break
-        return interval, burst, target_ip
+        return interval, burst
 
 
 def main():
-    RestartWaiter.waitAdvancedBootDone()
     global container_name
     container_name = os.environ['CONTAINER_NAME']
     daemon = ContainerConfigDaemon()

src/sonic-containercfgd/tests/test_config_daemon.py

@@ -2,6 +2,9 @@ import os
 import sys
 from unittest import mock
 
+from swsscommon import swsscommon
+swsscommon.RestartWaiter = mock.MagicMock()
+
 test_path = os.path.dirname(os.path.abspath(__file__))
 modules_path = os.path.dirname(test_path)
 sys.path.insert(0, modules_path)

src/sonic-containercfgd/tests/test_syslog_config.py

@@ -2,6 +2,9 @@ import os
 import sys
 from unittest import mock
 
+from swsscommon import swsscommon
+swsscommon.RestartWaiter = mock.MagicMock()
+
 test_path = os.path.dirname(os.path.abspath(__file__))
 modules_path = os.path.dirname(test_path)
 sys.path.insert(0, modules_path)
@@ -49,7 +52,7 @@ def test_handle_init_data():
 
 
 @mock.patch('containercfgd.containercfgd.run_command')
-@mock.patch('containercfgd.containercfgd.SyslogHandler.parse_syslog_conf', mock.MagicMock(return_value=('100', '200', '127.0.0.1')))
+@mock.patch('containercfgd.containercfgd.SyslogHandler.parse_syslog_conf', mock.MagicMock(return_value=('100', '200')))
 def test_update_syslog_config(mock_run_cmd):
     mock_run_cmd.return_value = ""
     handler = containercfgd.SyslogHandler()
@@ -69,13 +72,11 @@ def test_update_syslog_config(mock_run_cmd):
 def test_parse_syslog_conf():
     handler = containercfgd.SyslogHandler()
     handler.SYSLOG_CONF_PATH = os.path.join(test_path, 'mock_rsyslog.conf')
-    interval, burst, target_ip = handler.parse_syslog_conf()
+    interval, burst = handler.parse_syslog_conf()
     assert interval == '50'
     assert burst == '10002'
-    assert target_ip == '127.0.0.1'
 
     handler.SYSLOG_CONF_PATH = os.path.join(test_path, 'mock_empty_rsyslog.conf')
-    interval, burst, target_ip = handler.parse_syslog_conf()
+    interval, burst = handler.parse_syslog_conf()
     assert interval == '0'
     assert burst == '0'
-    assert target_ip is None