Why I did it
Chassis:
Fixed Multiple orchagent crashes due to BULK create failure
added new line card support
Addressed T2 snmp test failures
Addressed reboot issues
Chassis and Fixed:
Addressed dshell client issues
HWSKU name update from Cisco-8101-T32/Cisco-8101-C48T8 to Cisco-8101-O32/Cisco-8101-C48O8
How I did it
update to cisco version 0.12
Why I did it
Find a new bug on kubelet side. The kubernetes-cni plug-in was removed in #12997, the reason is that the plug-in will be auto installed when install kubeadm, and will report error if we don't remove the install code. But after removal, the version auto installed is different from what we installed before. This will affect the kubelet action in some scenarios we don't find before. Need to install it by another way.
How I did it
Install kubernetes-cni==0.8.7-00 before install kubeadm
How to verify it
Flannel binary will be installed under /opt/cni/bin/ folder
Why I did it
Update dynamic threshold to -1 to get optimal performance for RDMA traffic
How I did it
Modified pg_profile_lookup.ini to reflect the correct value
Signed-off-by: Neetha John <nejo@microsoft.com>
Co-authored-by: Neetha John <nejo@microsoft.com>
Why I did it
Add yang model definition for CHASSIS_MODULE define and implemented for sonic chassis. HLD for this configuration is included in https://github.com/sonic-net/SONiC/blob/master/doc/pmon/pmon-chassis-design.md#configurationFixes#12640
How I did it
Added yang model definition, unit tests, sample config and documentation for the table
How to verify it
Validated config tree generation using "pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-voq-inband-interface.yang"
Built the below python-wheels to validate unit tests and other changes
target/python-wheels/bullseye/sonic_yang_mgmt-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_yang_models-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_config_engine-1.0-py3-none-any.whl
- Why I did it
Remove dependency on interfaces-config.service to speed up boot, because interfaces-config.service takes a lot of time on boot.
- How I did it
Changed service files for swss, syncd.
- How to verify it
Boot and check swss/syncd start time comparing to interfaces-config
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
After the renaming of the asic_port_name in port_config.ini file (PR: #13053 ), the asic_ifname in port_config.ini is changed from '-ASIC<asic_id>' to just port. Example: 'Eth0-ASIC0' to 'Eth0'.
However, with this change a config_db generated via config load_minigraph would cause the EVERFLOW and EVERFLOWV6 tables under ACL_TABLE to not have any of non-LAG front panel interfaces. This was causing the EVERFLOW suite to fail.
How I did it
In parse_asic_external_neigbhors in minigraph.py there was a check that the asic_name.lower() (like asic0) is present in the port_alias_asic_map. However with -ASIC removed from the asic_ifname, the port_alias_asic_map would not have the asic_name and thus any non-LAG neighbor would not be included.
Fix was the ignore the asic name change as the port_alias_asic_map is already only looking for ports in just the same asic as asic_name.
How to verify it
Execute "config load_minigraph" with the mingraph which is generated by sonic-mgmt gen-minigraph script. And confirm ono-lag interface are present in the Everfloe table in the config_dbs.
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Dhcpmon had incorrect RX count for server side packets. It does not raise any false alarms, but could miss catching server side packet count mismatch between snapshot and current counter.
Add debug mode which prints counter to syslog
How I did it
Due to dualtor inbound filter requirement, there are currently two filters, each for listening to rx / tx packets.
Originally, we opened up an rx/tx socket for each interface specified, which causes duplicate socket. Now we initialize the sockets only once. Both sockets are not binded to an interface, and we use vlan to interface mapping to filter packets. For inbound uplinks, we use a portchannel to interface mapping.
Previous dhcpmon counter before dual tor change:
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
Dhcpmon counter after this PR:
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
How to verify it
Ran dhcp relay test to send all four packets in singles and batches on both single ToR and dual ToR. Counter was as expected.
- Why I did it
Healthd check system status every 60 seconds. However, running checker may take several seconds. Say checker takes X seconds, healthd takes (60 + X) seconds to finish one iteration. This implementation makes sonic-mgmt test case not so stable because the value X is hard to predict and different among different platforms. This PR introduces an interval
compensation mechanism to healthd main loop.
- How I did it
Introduces an interval compensation mechanism to healthd main loop: healthd should wait (60 - X) seconds for next iteration
- How to verify it
Manual test
Unit test
Provide platform-components.json for Clearwater2 and Wolverine
These files are needed for fwutil platform sonic-mgmt tests to pass.
Fix PikeZ platform_components.json
Co-authored-by: Patrick MacArthur <pmacarthur@arista.com>
Co-authored-by: Andy Wong <andywong@arista.com>
Why I did it
Update SAI xgs version to 7.1.36.4 to include the following changes and migrate xgs to DMZ repo.
JIRA# SONIC-69731 (7.1.33.4)
Issue Summary: SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO brcm_sai_get_switch_attribute returns null.
Root Cause: Not implemented.
Fix Description: Get support for SAI switch attr SAI_SWITCH_ATTR_SWITCH_HARDWARE_INFO added
JIRA# SONIC-70737 (7.1.34.4)
Issue Summary: ECN being marked as CE even without congestion
Root Cause: ecn_thresh was set to very low value and packets were 100% marked.
Fix Description: ecn_thresh set to correct value
backport SONIC-70081 to SAI7.1 (7.1.35.4)
egress lossy queue PFC Rx fix:ignore PFC signals from egress
Update git submodules (7.1.36.4)
Update sdk-src/hsdk_6.5.24_SAI_7.1.0_GA from branch 'hsdk_6.5.24_SAI_7.1.0_GA'
to 57d0e360269c4ab659c4790ae471aa4dba2532b4
[SAI_BRANCH rel_ocp_sai_7_1] Broadcom image build failed with SAI 7.1 in DMZ repo (on bullseye)
How I did it
Update SAI xgs code.
How to verify it
Run the SONiC and SAI test with the 7.1 SAI pipeline.
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
Why I did it
Add 'channel' to the CONFIG_DB PORT table. This will be needed to support PORT breakout to multiple channel ports so that Xcvrd can understand which datapath or channel to initialize on the CMIS compliant optics
How I did it
Add 'channel' to the CONFIG_DB PORT table.
How to verify it
Added unit test for valid and invalid channel number
Channel 0 -> No breakout
Channel 1 to 8 -> Breakout channel 1,2, ..8
Signed-off-by: Prince George <prgeor@microsoft.com>
Porting fix https://github.com/sonic-net/sonic-buildimage/pull/14045 to 202205. 202205 doesn't have fast_rate and hence only fallback is updated in yang model
#### Why I did it
Added Missing fields in sonic-portchannel yang model.
"fallback" is present in configuration schema but not in yang model. This leads to traceback when yang is validated
#### How I did it
Updated yang model
#### How to verify it
Added tests to verify
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
Part of the PR
Why I did it
To include DNX fix
Temp workaround for CS00012281200: J2C+ : Scope of config.bcm SOC property bcm_stat_interval
How I did it
Updated SAI version
How to verify it
Basic validation on DNX platform
Why I did it
Vendor platform may require running platform specific pre-shutdown routine before shutting down the syncd process which runs the SAI and vendor sdk instance.
How I did it
Added a platform script hook which will be executed if the plugin script is provided by the platform in device//plugins/
What I did
Check /etc/pam.d/sshd integrity after modify it in hostcfgd.
Why I did it
Found some incident that /etc/pam.d/sshd become empty file during OR upgrade.
How I verified it
Pass all UT.
Add new UT to cover new code.
Why I did it
Porting/cherry-pick PR sonic-net/sonic-host-services#46
"show reboot-cause history" shows empty history. When the previous-reboot-cause has a broken symlink, And rebooting the system will not be able to generate a new symlink of the new previous-reboot-cause.
admin@sonic:~$ show reboot-cause history
Name Cause Time User Comment
------ ------- ------ ------ ---------
How I did it
Somehow, when the symlink file /host/reboot-cause/previous-reboot-cause is broken (which its destination files doesn't exist in this case), the current condition check "if os.path,exists(PREVIOUS_REBOOT_CAUSE_FILE)" will return False in determine-reboot-cause script. Hence, the current previous-reboot-cause is not been removed and the recreation of the new previous-reboot-cause failed. In case of previous-reboot-cause is a broken synlink file, add condition os.path.islink(PREVIOUS_REBOOT_CAUSE) to check and allow the remove operation happens.
How to verify it
Manually make the /host/reboot-cause/previous-reboot-cause to be a broken symlink file by removing its destination file
reboot the system. "show reboot-cause history" should show the correct info
Signed-off-by: mlok <marty.lok@nokia.com>
- Why I did it
Some scripts on syncd require Python2 support.
- How I did it
Add Python2 to syncd docker
- How to verify it
Run manually python scripts under Nvidia SDK debug to ensure they are working
Fixe #12047. After the c++ implementation of the sonic-db-cli, sonic-db-cli PING command tries to initialize the global database for all instances database starting. If all instance database-config.json are not ready yet. it will crash and generate core file. PR sonic-net/sonic-swss-common#701 only fix the crash and the process abortion.
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Currently the show and clear cli of dhcp_relayis may cause confusion.
How I did it
Add doc for it: [doc] Add docs for dhcp_relay show/clear cli sonic-utilities#2649
Add dhcp_relay config cli and test cases.
show dhcp_relay ipv4 helper
show dhcp_relay ipv6 destination
show dhcp_relay ipv6 counters
sonic-clear dhcp_relay ipv6 counters
How to verify it
Unit test all passed
Why I did it
[Build] Support to use loosen version when failed to install python packages
It is to fix the issue #14012
How I did it
Try to use the installation command without constraint
How to verify it
* sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
* sx kernel is downloaded as zip from Spectrum-SDK-Drivers
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
#### Why I did it
Remove dialout as critical process as it is no longer used in prod. As part of future work, can remove dialout completely
#### How I did it
Remove from critical process list
Why I did it
Platform cases test_tx_disable, test_tx_disable_channel, test_power_override failed in dx010.
How I did it
Add i2c access algorithm for CPLD i2c adapters.
How to verify it
Verify it with platform_tests/api/test_sfp.py::TestSfpApi test cases.
