#### Why I did it
src/sonic-swss
```
* 5b27c209 - (HEAD -> master, origin/master, origin/HEAD) Refactor Orch class to separate recorder implementation (#2837) (8 hours ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
Reduced root directory privileges
#### How I did it
During build_debian - called chroot to reduce root directory and its subdirectories privileges to 744
#### How to verify it
After image build and upgrade - check /root privileges by calling "ls -a /root"
#### Description for the changelog
reduced /root directory privileges
#### Why I did it
src/sonic-platform-daemons
```
* 94242c2 - (HEAD -> master, origin/master, origin/HEAD) Use vendor customizable fan speed threshold checks (#378) (3 hours ago) [spilkey-cisco]
* db6e340 - Fix index out of range in the error log of invalid media lane mask received (#386) (8 hours ago) [MichaelWangSmci]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
Adjust PSU power threshold logic in system health.
- How I did it
Update the description message in PSU power threshold checking
power of PSU x (xx w) exceeds threshold (xx w) => System power exceeds xx threshold (xx w)
- How to verify it
Manual test and unit test
= Why I did it
To optimize Mellanox platform SAI build
- How I did it
SAI debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release.
- How to verify it
Configure/build for Mellanox platform, check the image and ensure that correct SAI debs are included.
- Why I did it
The reset cause "reset_from_comex" has been removed by hw-management, hence removing it from platform API code
- How I did it
Remove reset_from_comex from reboot cause mapping
- How to verify it
Manual test
- Why I did it
BIOS on new generation switch can come with a file type of cap or cab. Needs to add support to these file type.
Also ONIE version on new devices can have a suffix of 'dev'.
- How I did it
Added cap & cab as possible component extensions for ComponentBIOS.
Update the ONIE version regex to include dev signed versions.
- How to verify it
Update BIOS.
#### Why I did it
The testcases in sonic-mgmt need the packages of protobuf and dashapi
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Because the docker of sonic-mgmt is based on ubuntu20.04, it cannot directly install the packages compiled by slave due to dependency issues. Download related packaged directly from Azp.
#### How to verify it
Check azp stats.
Why I did it
When sonic is managed by k8s, the sonic container is managed by k8s daemonset, daemonset identifies its members by labels. Currently when restarting a sonic service by systemctl, if the service's container is already managed by k8s, systemd script stops the container by removing the feature label to make it disjoin from k8s daemonset, and then starts it by adding the label to make it join k8s daemonset again.
This behavior would cause problem during k8s container upgrade. Containers in daemonset are upgraded in a rolling fashion, that means the daemonset version is updated first, then rollout the new version to containers with precheck/postcheck one by one. However, if a sonic device joins a daemonset, k8s will directly deploy a pod with the current version of daemonset, it is expected when a device joins k8s cluster at first time.
But for a device which has already joined k8s cluster, the re-joining daemonset will cause the container upgraded to new version without precheck, so if a systemd service is restarted during daemonset upgrade, the container may be upgraded without precheck and break rolling update policy. To fix it, we need to remove the logic about dropping k8s label in systemd service stop script for kube mode.
Work item tracking
Microsoft ADO (number only): 24304563
How I did it
Don't drop label in systemd service stop script when feature's set_owner is kube. Only drop label when feature's set_owner is local.
How to verify it
The label feature_enabled should be always true if the feature's set owner is kube.
This is primarily to fix a bug in scapy hitting an error when trying to
listen on multiple interfaces in a single `sniff` call. This also
upgrades it to the current latest version.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/sonic-utilities
```
* 51c7a43c - (HEAD -> master, origin/master, origin/HEAD) [show][muxcable] update `show mux config` to print out `soc_ipv6` as well (#2909) (6 hours ago) [Jing Zhang]
* fd497755 - [route_check][dualtor] Ignore vlan neighbor route miss (#2888) (18 hours ago) [Longxiang Lyu]
* 81c0ed4e - [show][muxcable] update `show mux tunnel-route` to check soc_ipv6 as well (33 hours ago) [Jing Zhang]
* 1ee73668 - [db_migrator] Migrate DNS configuratuion (#2893) (2 days ago) [ganglv]
* 553a3432 - [dualtor][route_check] filter out `soc_ipv6` (#2899) (2 days ago) [Jing Zhang]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
For some devices whose log folder size is larger than 200M, for example, 256M, the LOG_FILE_ROTATE_SIZE_KB should be 16M. and
THRESHOLD_KB=$((USABLE_SPACE_KB - (NUM_LOGS_TO_ROTATE * LOG_FILE_ROTATE_SIZE_KB * 2)))
= $(( (VAR_LOG_SIZE_KB * 90 / 100) - RESERVED_SPACE_KB)) - (NUM_LOGS_TO_ROTATE * LOG_FILE_ROTATE_SIZE_KB * 2)))
= $(( (256M * 90 / 100) - 4096)) - (8 * 16M * 2)))
the result would be a negative value
Work item tracking
Microsoft ADO (number only):
24524827
How I did it
Add a case for 400M, if the log folder size is between 200M and 400M, set the log file size to 2M
How to verify it
Do cmd "sudo logrotate -f /etc/logrotate.conf" on DUT which val/log folder size is 256M, and check the syslog.
Why I did it
When do clean up container images, current code has two bugs need to be fixed. And some variables' name maybe cause confused, change the variables' name.
Work item tracking
Microsoft ADO (number only): 24502294
How I did it
We do clean up after tag latest successfully. But currently tag latest function only return 0 and 1, 0 means succeed and 1 means failed, when we get 1, we will retry, when we get 0, we will do clean up. Actually the code 0 includes another case we don't need to do clean up. The case is that when we are doing tag latest, the container image we want to tag maybe not running, so we can not tag latest and don't need to cleanup, we need to separate this case from 0, return -1 now.
When local mode(v1) -> kube mode(v2) happens, one problem is how to handle the local image, there are two cases. one case is that there was one kube v1 container dry-run(cause we don't relace the local if kube version = local version), we will remove the kube v1 image and tag the local version with ACR prefix and remove local v1 local tag. Another case is that there was no kube v1 container dry-run, we remove the local v1 image directly, cause the local v1 image should not be the last desire version.
About the docker_id variable, it may cause confused, it's actually docker image id, so rename the variable. About the two dicts and the list, rename them to be more readable.
How to verify it
Check tag latest and image clean up result.
Why I did it
During the upgrade process via k8s, the feature's systemd service will restart as well, all of the feature systemd service has restart number limit, and the limit number is too small, only three times. if fallback happens when upgrade, the start count will be 2, just once again, the systemd service will be down. So, need to bypass this. This restart function will be called when do local -> kube, kube -> kube, kube ->local, each time call this function, we indeed need to restart successfully, so do reset-failed every time we do restart.
When need to go back to local mode, we do systemd restart immediately without waiting the default restart interval time so that we can reduce the container down time.
Work item tracking
Microsoft ADO (number only):
24172368
How I did it
Before every restart for upgrade, do reset feature's restart number. The restart number will be reset to 0 to bypass the restart limit.
When need to go back to local mode, we do systemd restart immediately.
How to verify it
Feature's systemd service can be always restarted successfully during upgrade process via k8s.
Why I did it
HLD implementation: Container Hardening (sonic-net/SONiC#1364)
Work item tracking
Microsoft ADO (number only): 14807420
How I did it
Reduce linux capabilities in privileged flag, retain NET_ADMIN and SYS_ADMIN capabilities
How to verify it
Install new image to DUT, verify bgp container is up
Run bgp sonic-mgmt kvmtest
Why I did it
[Build] Change the build option from ENABLE_FIPS_FEATURE to INCLUDE_FIPS
Work item tracking
Microsoft ADO (number only): 24485797
How I did it
#### Why I did it
src/sonic-platform-daemons
```
* d73808c - (HEAD -> master, origin/master, origin/HEAD) Added PCIe transaction check for all peripherals on the bus (#331) (9 hours ago) [Ashwin Srinivasan]
* 432602a - Update active application selected code in transceiver_info table aft… (#381) (13 hours ago) [Michael Wang - TW]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* c7e1308e - (HEAD -> master, origin/master, origin/HEAD) Remove redundant updateFabricPortState (#2850) (2 hours ago) [kenneth-arista]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
It is to fix the docker-ptf-sai build failure.
https://dev.azure.com/mssonic/build/_build/results?buildId=311315&view=logs&j=cef3d8a9-152e-5193-620b-567dc18af272&t=cf595088-5c84-5cf1-9d7e-03331f31d795
2023-07-09T13:53:19.9025355Z �[91mTraceback (most recent call last):
2023-07-09T13:53:19.9025715Z File "/root/ptf/.eggs/setuptools_scm-7.1.0-py3.7.egg/setuptools_scm/_entrypoints.py", line 74, in <module>
2023-07-09T13:53:19.9025933Z from importlib.metadata import entry_points # type: ignore
2023-07-09T13:53:19.9026167Z ModuleNotFoundError: No module named 'importlib.metadata'
Work item tracking
Microsoft ADO (number only): 24513583
How I did it
How to verify it
Modify snmpd.conf to start snmpd to listen on specific management and loopback ips instead of listening on any ip.
#### Why I did it
SNMP over IPv6 is not working for all scenarios for a single asic platforms.
The expectation is that SNMP query over IPv6 should work over Management or Loopback0 addresses.
**Specific scenario where this issue is seen**
In case of Lab T0 device, when SNMP request is sent from a directly connected T1 neighbor over Loopback IP, SNMP response was not received.
This was because the SRC IP address in SNMP response was not Loopback IP, it was the PortChannel IP connected to the neighboring device.
```
23:18:51.620897 In 22:26:27:e6:e0:07 ethertype IPv6 (0x86dd), length 105: fc00::72.41725 > **fc00:1::32**.161: C="msft" **GetRequest**(28) .1.3.6.1.2.1.1.1.0
23:18:51.621441 Out 28:99:3a:a0:97:30 ethertype IPv6 (0x86dd), length 241: **fc00::71**.161 > fc00::72.41725: C="msft" **GetResponse**(162) .1.3.6.1.2.1.1.1.0="SONiC Software Version: SONiC.xxx - HwSku: xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64"
```
In case of IPv4, the SRC IP in SNMP response was correctly set to Loopback IP.
```
23:25:32.769712 In 22:26:27:e6:e0:07 ethertype IPv4 (0x0800), length 85: 10.0.0.57.56701 > **10.1.0.32**.161: C="msft" **GetRequest**(28) .1.3.6.1.2.1.1.1.0
23:25:32.975967 Out 28:99:3a:a0:97:30 ethertype IPv4 (0x0800), length 221: **10.1.0.32**.161 > 10.0.0.57.56701: C="msft" **GetResponse**(162) .1.3.6.1.2.1.1.1.0="SONiC Software Version: SONiC.xxx - HwSku: xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64"
```
**Sequence of SNMP request and response**
1. SNMP request will be sent with SRC IP fc00::72 DST IP fc00:1::32
2. SNMP request is received at SONiC device is sent to snmpd which is listening on port 161 :::161/
3. snmpd process will parse the request create a response and sent to DST IP fc00::72.
snmpd process does not track the DST IP on which the SNMP request was received, which in this case is Loopback IP.
snmpd process will only keep track what is tht IP to which the response should be sent to.
4. snmpd process will send the response packet.
5. Kernel will do a route look up on destination IP and find the best path.
ip -6 route get fc00::72
fc00::72 from :: dev PortChannel101 proto kernel src fc00::71 metric 256 pref medium
5. Using the "src" ip from about, the response is sent out. This SRC ip is that of the PortChannel and not the device Loopback IP.
The same issue is seen when SNMP query is sent from a remote server over Management IP.
SONiC device eth0 --------- Remote server
SNMP request comes with SRC IP <Remote_server> DST IP <Mgmt IP>
If kernel finds best route to Remote_server_IP is via BGP neighbors, then it will send the response via front-panel interface with SRC IP as Loopback IP instead of Management IP.
Main issue is that in case of IPv6, snmpd ignores the IP address to which SNMP request was sent, in case of IPv6.
In case of IPv4, snmpd keeps track of DST IP of SNMP request, it will keep track if the SNMP request was sent to mgmt IP or Loopback IP.
Later, this IP is used in ipi_spec_dst as SRC IP which helps kernel to find the route based on DST IP using the right SRC IP.
https://github.com/net-snmp/net-snmp/blob/master/snmplib/transports/snmpUDPBaseDomain.c#L300
ipi.ipi_spec_dst.s_addr = srcip->s_addr
Reference: https://man7.org/linux/man-pages/man7/ip.7.html
```
If IP_PKTINFO is passed to sendmsg(2)
and ipi_spec_dst is not zero, then it is used as the local
source address for the routing table lookup and for
setting up IP source route options. When ipi_ifindex is
not zero, the primary local address of the interface
specified by the index overwrites ipi_spec_dst for the
routing table lookup.
```
**This issue is not seen on multi-asic platform, why?**
on multi-asic platform, there exists different network namespaces.
SNMP docker with snmpd process runs on host namespace.
Management interface belongs to host namespace.
Loopback0 is configured on asic namespaces.
Additional inforamtion on how the packet coming over Loopback IP reaches snmpd process running on host namespace: https://github.com/sonic-net/sonic-buildimage/pull/5420
Because of this separation of network namespaces, the route lookup of destination IP is confined to routing table of specific namespace where packet is received.
if packet is received over management interface, SNMP response also is sent out of management interface. Same goes with packet received over Loopback Ip.
##### Work item tracking
- Microsoft ADO **17537063**:
#### How I did it
Have snmpd listen on specific Management and Loopback IPs specifically instead of listening on any IP for single-asic platform.
Before Fix
```
admin@xx:~$ sudo netstat -tulnp | grep 161
udp 0 0 0.0.0.0:161 0.0.0.0:* 15631/snmpd
udp6 0 0 :::161 :::* 15631/snmpd
```
After fix
```
admin@device:~$ sudo netstat -tulnp | grep 161
udp 0 0 10.1.0.32:161 0.0.0.0:* 215899/snmpd
udp 0 0 10.3.1.1:161 0.0.0.0:* 215899/snmpd
udp6 0 0 fc00:1::32:161 :::* 215899/snmpd
udp6 0 0 fc00:2::32:161 :::* 215899/snmpd
```
**How this change helps with the issue?**
To see snmpd trace logs, modify snmpd to start using the below parameters, in supervisord.conf file
```
/usr/sbin/snmpd -f -LS0-7i -Lf /var/log/snmpd.log
```
When snmpd listens on any IP, snmpd binds to IPv4 and IPv6 sockets as below:
```
netsnmp_udpbase: binding socket: 7 to UDP: [0.0.0.0]:0->[0.0.0.0]:161
trace: netsnmp_udp6_transport_bind(): transports/snmpUDPIPv6Domain.c, 303:
netsnmp_udpbase: binding socket: 8 to UDP/IPv6: [::]:161
```
When IPv4 response is sent, it goes out of fd 7 and IPv6 response goes out of fd 8.
When IPv6 response is sent, it does not have the right SRC IP and it can lead to the issue described.
When snmpd listens on specific Loopback/Management IPs, snmpd binds to different sockets:
```
trace: netsnmp_udpipv4base_transport_bind(): transports/snmpUDPIPv4BaseDomain.c, 207:
netsnmp_udpbase: binding socket: 7 to UDP: [0.0.0.0]:0->[10.250.0.101]:161
trace: netsnmp_udpipv4base_transport_bind(): transports/snmpUDPIPv4BaseDomain.c, 207:
netsnmp_udpbase: binding socket: 8 to UDP: [0.0.0.0]:0->[10.1.0.32]:161
trace: netsnmp_register_agent_nsap(): snmp_agent.c, 1261:
netsnmp_register_agent_nsap: fd 8
netsnmp_udpbase: binding socket: 10 to UDP/IPv6: [fc00:1::32]:161
trace: netsnmp_register_agent_nsap(): snmp_agent.c, 1261:
netsnmp_register_agent_nsap: fd 10
netsnmp_ipv6: fmtaddr: t = (nil), data = 0x7fffed4c85d0, len = 28
trace: netsnmp_udp6_transport_bind(): transports/snmpUDPIPv6Domain.c, 303:
netsnmp_udpbase: binding socket: 9 to UDP/IPv6: [fc00:2::32]:161
```
When SNMP request comes in via Loopback IPv4, SNMP response is sent out of fd 8
```
trace: netsnmp_udpbase_send(): transports/snmpUDPBaseDomain.c, 511:
netsnmp_udp: send 170 bytes from 0x5581f2fbe30a to UDP: [10.0.0.33]:46089->[10.1.0.32]:161 on fd 8
```
When SNMP request comes in via Loopback IPv6, SNMP response is sent out of fd 10
```
netsnmp_ipv6: fmtaddr: t = (nil), data = 0x5581f2fc2ff0, len = 28
trace: netsnmp_udp6_send(): transports/snmpUDPIPv6Domain.c, 164:
netsnmp_udp6: send 170 bytes from 0x5581f2fbe30a to UDP/IPv6: [fc00::42]:43750 on fd 10
```
#### How to verify it
Verified on single asic and multi-asic devices.
Single asic SNMP query with Loopback
```
ARISTA01T1#bash snmpget -v2c -c xxx 10.1.0.32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: Arista-7260xx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64
ARISTA01T1#bash snmpget -v2c -c xxx fc00:1::32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: Arista-7260xxx - Distribution: Debian 10.13 - Kernel: 4.19.0-12-2-amd64
```
On multi-asic -- no change.
```
sudo netstat -tulnp | grep 161
udp 0 0 0.0.0.0:161 0.0.0.0:* 17978/snmpd
udp6 0 0 :::161 :::* 17978/snmpd
```
Query result using Loopback IP from a directly connected BGP neighbor
```
ARISTA01T2#bash snmpget -v2c -c xxx 10.1.0.32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: xx - Distribution: Debian 9.13 - Kernel: 4.9.0-14-2-amd64
ARISTA01T2#bash snmpget -v2c -c xxx fc00:1::32 1.3.6.1.2.1.1.1.0
SNMPv2-MIB::sysDescr.0 = STRING: SONiC Software Version: SONiC.xx - HwSku: xx - Distribution: Debian 9.13 - Kernel: 4.9.0-14-2-amd64
```
<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->
#### Why I did it
src/sonic-linux-kernel
```
* d070cae - (HEAD -> master, origin/master, origin/HEAD) arm64: dts: marvell: Add Nokia 7215-IXS-A1 board (#321) (34 hours ago) [Pavan-Nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 465f95e - (HEAD -> master, origin/master, origin/HEAD) Default implementation of under/over speed checks (#382) (9 hours ago) [spilkey-cisco]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* 7ca31477 - (HEAD -> master, origin/master, origin/HEAD) [db_migrator] Set docker_routing_config_mode to the value obtained from minigraph parser (#2890) (10 hours ago) [Vaibhav Hemant Dixit]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
Support reset factory in Sonic OS
[Reset Factory HLD](https://github.com/sonic-net/SONiC/pull/1231)
[Sonic-mgmt tests](https://github.com/sonic-net/sonic-mgmt/pull/7652)
#### How I did it
- Added new script "/usr/bin/reset-factory"
* It generates a new config_db.json files with factory configurations
* It clears system files and logs
* It removes all docker containers on system except database
* It clears non-default users and restores default users password
- Dump the default users info to a new file during build "/etc/sonic/default_users.json"
- Supported new type "Keep-basic" in "config-setup factory"
- Add new conf file for config-setup "/etc/config-setup/config-setup.conf
#### How to verify it
- Run reset-factory script with all types: < none | keep-all-config | only-config | keep-basic >
- Run config-setup factory with parameters < none | keep-basic >
#### Description for the changelog
Support reset factory in Sonic OS
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Why I did it
Failed to build sonic-dhcp6relay_1.0.0-0_amd64.deb
#### How I did it
src/dhcprelay has git submodule.
Dependency files by "git ls-files" are not picked files in submodules.
Add --recurse-submodules, work again.
#### How to verify it
make all
Why I did it
port_config.ini and hwsku.json are needed to generate the default config
switch_type needs to be "dpu" to spawn the right set of processes during dvs initialization and to make sure that DASH APIs can be handled properly
Work item tracking
Microsoft ADO 24375371:
How I did it
Use the same hwsku.json and port_config.ini for DPU-2P as the ones used for Nvidia-MBF2H536C SKU in nvidia-sonic sonic-buildimage repo.
Set switch_type to "dpu" in DEVICE_METADATA configuration to make sure DASH specific APIs are handled properly
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
#### Why I did it
src/sonic-swss
```
* 776af62c - (HEAD -> master, origin/master, origin/HEAD) [CodeQL]: Use dependencies with relevant versions in azp template. (#2845) (4 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* 01fe667 - (HEAD -> master, origin/master, origin/HEAD) Merge pull request #134 from FengPan-Frank/fenpan_dialout_rename (3 days ago) [Feng-msft]
|\
| * 994c69c - Rename --enable-dialout option into ENABLE_DIALOUT to follow the convention. (3 days ago) [Feng Pan]
|/
* a9126da - Update makefile to support armhf (#132) (3 days ago) [ganglv]
* 0d80c0d - prevent potential panic: return immediately if there exists error (#113) (7 days ago) [Mai Bui]
* 3c0fca3 - Merge pull request #131 from FengPan-Frank/fenpan_dialout (7 days ago) [Feng-msft]
|\
| * c3d3266 - Add build flag into gnmi as --enable-dialout. (8 days ago) [Feng Pan]
|/
* fd78c42 - add semgrep (#126) (2 weeks ago) [Mai Bui]
* 214fa1c - TranslClient: Use new translib subscription APIs (#122) (3 weeks ago) [Sachin Holla]
* 87d8eb3 - (origin/202305) TranslClient: use PathValidator to sanitize the request paths (#112) (3 weeks ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
After k8s upgrade a container, k8s can only know the container is running, don't know the service's status inside container. So we need a probe inside container, k8s will call the probe to check whether the container is really ready.
##### Work item tracking
- Microsoft ADO **(number only)**: 22453004
#### How I did it
Add a health check probe inside config engine container, the probe will check whether the start service exit normally or not if the start service exists and call the python script to do container self-related specific checks if the script is there. The python script should be implemented by feature owner if it's needed.
more details: [design doc](https://github.com/sonic-net/SONiC/blob/master/doc/kubernetes/health-check.md)
#### How to verify it
Check path /usr/bin/readiness_probe.sh inside container.
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [x] 202205
- [x] 202211
#### Tested branch (Please provide the tested image version)
- [x] 20220531.28
Why I did it
This is part of sonic-mgmt-docker Python3 migration project.
Currently Python3 packages are in the Python3 virtual environment. This PR will add Python3 packages to real file system.
After we migrate all script to use Python3 in real file system, the Python3 venv will be deleted.
After this PR, in sonic-mgmt-docker,
Directly run cmd - pytest will use Python2's version.
python3 -m pytest will use Python3's version.
How I did it
Modify sonic-mgmt-docker j2 script.
How to verify it
Build a private sonic-mgmt-docker and run basic test case with Python3.
* Add an ability to configure remote syslog servers
* Add an initial configuration for remote syslog
* Extend YANG module and add unit tests
#### Why I did it
Adding the following functionality to rsyslog feature:
- Configure remote syslog servers: protocol, filter, severity level
- Update global syslog configuration: severity level, message format
#### How I did it
added parameters to syslog server and global configuration.
#### How to verify it
create syslog server using CLI/adding to Redis-DB
verify server is added to file /etc/rsyslog.conf and server is functional.
#### Description for the changelog
extend rsyslog capabilities, added server and global configuration parameters.
#### Link to config_db schema for YANG module changes
https://github.com/iavraham/sonic-buildimage/blob/master/src/sonic-yang-models/yang-models/sonic-syslog.yang
- Why I did it
Implemented ssh configurations
- How I did it
Added ssh config table in configDB, once changed - hostcfgd will change the relevant OS files (sshd_config)
- How to verify it
Tests in sonic-host-services. Change relevant configs in configDB such as ports, and see sshd port was modified
*use lower case for IPv6 address as internal key and bfd session key. fixes#15764
Why I did it
*staticroutebfd uses the IPv6 address string as a key to create bfd session and cache the bfd sessions using it as a key.
When the IPv6 address string has uppercase letter in the static route nexthop list, the string with uppercase letter key is stored in the cache, but the BFD STATE_DB uses lowercase for IPv6 address, so when the staticroutebfd get the bfd state event, it cannot find the bfd session in its local cache because of the letter case.
#### Why I did it
We should not modify minigraph schema.
#### How I did it
Update minigraph.py and remove unit test.
#### How to verify it
Run sonic-config-engine unit test.
Why I did it
Refine PR test template format.
How I did it
Refine PR test template format.
How to verify it
PR test executed normally.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
#### Why I did it
src/sonic-mgmt-common
```
* 341fd73 - (HEAD -> master, origin/master, origin/HEAD) Remove invalid db type definitions: ERROR_DB, USER_DB (#94) (3 days ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
*What I did:
Enable BFD for Static Route for chassis-packet. This will trigger the use of the feature as defined in here: #13789
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
fix static route uninstall issue when all nexthops are not reachable.
the feature was working but the bug was introduced when support dynamic bfd enable/disable. Added UT testcase to guard this.
