Compare commits

...

192 Commits

Author SHA1 Message Date
StormLiangMS
16ec76afd2 Revert "[baseimage]: Update openssh to 1:8.4p1-5+deb11u2 (#16826)"
This reverts commit 39cdee57e1.
2023-10-18 11:29:00 +08:00
Aman Singhal
f265c79541 [cisco]: Enable Kdump config by default for cisco-8000 (#16224)
Why I did it
Enabling kdump by default for cisco-8000 by setting crashkernel cmdline arg in device installer.conf.
After bootup, sonic-kdump-config wipes crashkernel arg from /host/grub/grub.cfg, and resets USE_KDUMP in /etc/default/kdump-tools, so kdump will not be enabled on subsequent reboot.

How I did it
Setting kdump enable config as part of init_cfg.json for cisco-8000 platforms.

How to verify it
Install SONiC image with kdump enabled by default (device/hwsku/installer.conf), then reboot.
Kdump config should persist on subsequent reboots and kdump loaded during bootup

Signed-off-by: Aman Singhal <amans@cisco.com>
2023-10-18 00:37:30 +08:00
Sudharsan Dhamal Gopalarathnam
eea4da346f [FRR] Adding patches for CVE-2023-41358 and CVE-2023-38802 (#16749)
Created patches to address two CVEs from FRR CVE-2023-41358 and CVE-2023-38802.

Patch	FRR commit	CVE fixed
0024-bgpd-Do-not-process-NLRIs-if-the-attribute-length-is.patch	FRRouting/frr@f291f1e	CVE-2023-41358
0025-bgpd-Use-treat-as-withdraw-for-tunnel-encapsulation-.patch	FRRouting/frr@8a4a88c	CVE-2023-38802
2023-10-18 00:37:22 +08:00
Ashwin Srinivasan
c31ccbaba8 Revert "Move /var/log to RAM for Mellanox SN2700, Nokia 7215 and Dell S6100 (#15077)" (#16775)
This reverts commit 05f326eed9.

Microsoft ADO 25355843:
2023-10-18 00:37:18 +08:00
Samuel Angebault
dbea038e96 Disable CPU C-States other than C1 (#16703)
Why I did it
Networking devices need to be responsive. Such responsiveness is harmed when the CPU change state.
There is a latency penalty when a CPU is idle (e.g C2) and need to exit this state to come back to C1 state.
To prevent this from happening the CPU should be forced to remain in C1 state.

How I did it
Generalize the cstate forcing to C1 to all Arista products.
This is done by adding processor.max_cstate=1 to the kernel cmdline for all CPUs.
Additionally Intel CPUs also need intel_idle.max_cstate=0 to fallback to the acpi_idle driver.

How to verify it
Check that processor.max_cstate=1 is present on the cmdline for AMD CPUs
Check that both processor.max_cstate=1 and intel_idle.max_cstate=0 are present on the cmdline for Intel CPUs
2023-10-17 20:49:07 +08:00
Samuel Angebault
a8b53e1452 [Arista] Remove pcie device monitoring for 7260CX3-64 (#12734)
On some products from this line one of the management NIC might be unpopulated.
On such products this leads to errors from pcied and pcie-check.sh

How I did it
Remove this PCIe device from pcie.yaml

How to verify it
Run pcieutil check on the 2 hardware variants and validate that it passes.
Restart pcied and make sure that there is no more error logs in the syslog.

ADO: 25447788
2023-10-17 20:49:02 +08:00
mssonicbld
e80b956502
[ci/build]: Upgrade SONiC package versions (#15617) 2023-10-17 20:48:25 +08:00
Saikrishna Arcot
39cdee57e1 [baseimage]: Update openssh to 1:8.4p1-5+deb11u2 (#16826)
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408. 
Since we're building openssh with some patches, we need to update our version as well.

Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
2023-10-17 16:34:18 +08:00
abdosi
584c448b22 [chassisd]: Updated the API get_platform_info() to return running/detected ASIC's count (#16539)
previously, get_num_asics() returns the maximum number of asics. however, the asic_count 
should be actual number of asics populated which can be get from get_asic_presence_list().

ADO: 25158825

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
2023-10-16 16:34:40 +08:00
mssonicbld
503cb55cdb
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16868)
#### Why I did it
src/sonic-swss
```
* fc63383b - (HEAD -> 202305, origin/202305) [ppi]: Implement port bulk comparison logic (#2921) (2 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-10-13 16:33:57 +08:00
mssonicbld
f6bf09d796
upgrade xgs SAI version to 8.4.21.0 (#16805) (#16873) 2023-10-13 16:11:28 +08:00
Samuel Angebault
696c3ec44d
[202305][Arista] Update platform library submodules (#16702) 2023-10-12 22:53:35 +08:00
mssonicbld
261113ada9
[submodule] Update submodule sonic-host-services to the latest HEAD automatically (#16842)
#### Why I did it
src/sonic-host-services
```
* fc88254 - (HEAD -> 202305, origin/202305) Support to config fips state (#69) (#78) (16 hours ago) [xumia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-10-12 20:49:04 +08:00
Liu Shilong
a4e6e3da8b [build] Add sonic-utilities to sonic-host-services dependencies list. (#15987)
Why I did it
sonic-host-services depends on sonic-utilities because of FIPS feature.
Add dependency to unblock submodule sonic-host-services HEAD pointer update.

Work item tracking
Microsoft ADO (number only): 24671218
How I did it
2023-10-12 12:32:53 +08:00
Sudharsan Dhamal Gopalarathnam
d92eade3d3 [build]Fix FRR build cache issue (#16713)
### Why I did it
When FRR is built with Cache enabled, the build failed with the following error logs
```
[2023-09-20T15:17:00.273Z] fatal: Unable to hash src/sonic-frr/frr/tests/topotests/grpc_basic/lib
[2023-09-20T15:17:00.273Z] fatal: Unable to hash src/sonic-frr/frr/tests/topotests/ospfapi/lib
[2023-09-20T15:17:00.273Z] make: *** [Makefile.cache:528: target/debs/bullseye/frr_8.5.1-sonic-0_amd64.deb.smdep] Error 123
[2023-09-20T15:17:00.273Z] make: *** Waiting for unfinished jobs....
```
#### How I did it
Currently symlinks are excluded in hardcoded fashion. With FRR upgrades new symlinks might get introduced. To overcome it modified the way in which symlinks are excluded by finding symlinks using find command

#### How to verify it
Build FRR with cache enabled
2023-10-11 02:33:09 +08:00
Liu Shilong
0772884971 [build] Fix frr dpkg cache calculation issue on symbolic link file. (#16700)
Why I did it
Now build will fail on:

fatal: Unable to hash src/sonic-frr/frr/tests/topotests/grpc_basic/lib
fatal: Unable to hash src/sonic-frr/frr/tests/topotests/ospfapi/lib
make: *** [Makefile.cache:528: target/debs/buster/frr_8.5.1-sonic-0_amd64.deb.smdep] Error 123
make: *** Waiting for unfinished jobs....
Root cause is that these files are symbol links.
git hash-object can't hash symbol links.

Work item tracking
Microsoft ADO (number only): 25271730
How I did it
These two files are symbol links.
When calculate sha value, skip these two files.
2023-10-10 16:33:28 +08:00
mssonicbld
efe5ca8c49
Fix the dependency grpcio-tools version (#16776) (#16809) 2023-10-09 19:02:12 +08:00
mssonicbld
b843245757
[submodule] Update submodule sonic-linux-kernel to the latest HEAD automatically (#16806)
#### Why I did it
src/sonic-linux-kernel
```
* e262947 - (HEAD -> 202305, origin/202305) Revert "Update to Linux 5.10.179 (#328)" (19 hours ago) [stormliang]
* e64669d - Update to Linux 5.10.179 (#328) (2 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-10-09 18:36:02 +08:00
SuvarnaMeenakshi
2579b9506c
[202305][SNMP][IPv6]: Revert PRs to support SNMP over IPv6 (#16649)
* Revert "[SNMP][IPv6]: Fix to use link local IPv6 address as snmp agentAddress (#16013)"

This reverts commit ebe8c8c223.

* Revert "[SNMP][IPv6]: Fix SNMP IPv6 reachability issue in certain scenarios (#15487) (#15874)"

This reverts commit 83aa8b8180.
2023-10-09 09:47:44 +08:00
mssonicbld
d675af7027
[submodule] Update submodule sonic-gnmi to the latest HEAD automatically (#16799)
#### Why I did it
src/sonic-gnmi
```
* df4d49f - (HEAD -> 202305, origin/202305) Install necessary debs instead of entire artifact in azp (#137) (12 hours ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-10-08 16:32:21 +08:00
mssonicbld
ddd932eb92
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16803) 2023-10-08 15:54:12 +08:00
mssonicbld
e6cdb9a590
[submodule] Update submodule sonic-sairedis to the latest HEAD automatically (#16801) 2023-10-08 15:50:58 +08:00
mssonicbld
0c4a5b4a82
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16804) 2023-10-08 15:32:19 +08:00
jhli-cisco
45b023cbe5
Update cisco-8000.ini (#16786)
Why I did it
First SONIC 202305 based release
Includes all fixes so far up to latest 202205 based 8111 drop (Code drop 111: 202205.main.0.13)
Work item tracking
Microsoft ADO (number only):
How I did it
update to 202305.main.0.1 release

How to verify it
2023-10-08 12:30:32 +08:00
Nazarii Hnydyn
ea40778e35
[ssm]: Enable Store-And-Forward switching mode for SN2700/SN3800/SN4600C/SN4700. (#16761)
BACKPORT: #16781

Why I did it
To enable Store-And-Forward switching mode for SN2700/SN3800/SN4600C/SN4700
Work item tracking
N/A
How I did it
Added vendor SAI config options
How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
2023-10-08 12:29:09 +08:00
mssonicbld
70332c1fde
[nokia]: Updated total headroom pool size to accommodate 100G ports on T2 uplinks (#16690) (#16798) 2023-10-08 04:04:33 +08:00
mssonicbld
94044d0dbf
[Nokia][sonic-platform] Update Nokia sonic-platform submodule - SFP support for CMIS CDB operations (#16572) (#16796) 2023-10-08 03:21:38 +08:00
mssonicbld
e793e83c0a
Update BMCDATAV6 Definition (#16634) (#16797) 2023-10-08 03:06:51 +08:00
mssonicbld
c3ea44a522
[Mellanox] add new platform 2700 a1 (#16515) (#16795) 2023-10-08 03:06:03 +08:00
mssonicbld
413f4bd253
[Arista] Add new hwskus to x86_64-arista_7060dx5_32 (#16077) (#16794) 2023-10-08 02:59:07 +08:00
mssonicbld
7c812509fd
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16764) 2023-10-05 15:21:57 +08:00
Junchao-Mellanox
648c94dd59 [Mellanox] wait reset cause ready (#16722)
Why I did it
SONiC service determine-reboot-cause might run before driver creating reset cause files. In that case, the reset cause will be "Unknown". This PR introduces a wait mechanism to wait for reset cause sysfs files ready.

How I did it
/run/hw-management/config/reset_attr_ready is the file to indicate all reset cause files are ready. In chassis.get_reboot_cause function, it waits /run/hw-management/config/reset_attr_ready for up to 45 seconds.

How to verify it
Manual test on master/202211/202205
2023-10-04 14:34:30 +08:00
mssonicbld
185a63bc7f
[fast-reboot] Fix regression: set FAST_REBOOT state_db flag to support fast-reboot from older images (#16733) (#16753) 2023-09-29 05:29:20 +08:00
xumia
28f011a2f0 [Ci] Change the package upgrade PR title (#16674)
* [Ci] Change the package upgrade PR title

* Change the branchname variable, and change the body
2023-09-28 02:33:48 +08:00
Vivek
11e9f7c0de [Nvidia] Remove the dependency on python_sdk_api for sfp api (#16545)
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.

Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
2023-09-27 18:33:34 +08:00
mssonicbld
4500709c8a
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16694)
#### Why I did it
src/sonic-swss
```
* 8934b62b - (HEAD -> 202305, origin/202305) [202305][CodeQL]: Use dependencies with relevant versions in azp template. (#2906) (3 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-09-26 16:33:35 +08:00
Sudharsan Dhamal Gopalarathnam
11ed28c857 [ctnmgd]: Fixing netaddr build issue (#16668)
Fixing the following build issue

[2023-09-20T04:42:00.004Z] [ FAIL LOG START ] [ target/python-wheels/bullseye/sonic_bgpcfgd-1.0-py3-none-any.whl ]
[2023-09-20T04:42:00.004Z] Build start time: Wed Sep 20 04:41:54 UTC 2023
[2023-09-20T04:42:00.004Z] [ REASON ] :      target/python-wheels/bullseye/sonic_bgpcfgd-1.0-py3-none-any.whl does not exist   NON-EXISTENT PREREQUISITES: target/python-wheels/bullseye/sonic_config_engine-1.0-py3-none-any.whl-install target/python-wheels/bullseye/sonic_yang_mgmt-1.0-py3-none-any.whl-install target/python-wheels/bullseye/sonic_yang_models-1.0-py3-none-any.whl-install target/debs/bullseye/libyang_1.0.73_amd64.deb-install target/debs/bullseye/libyang-cpp_1.0.73_amd64.deb-install target/debs/bullseye/python3-yang_1.0.73_amd64.deb-install target/debs/bullseye/python3-swsscommon_1.0.0_amd64.deb-install 
[2023-09-20T04:42:00.004Z] [ FLAGS  FILE    ] : [] 
[2023-09-20T04:42:00.005Z] [ FLAGS  DEPENDS ] : [mellanox amd64 bullseye] 
[2023-09-20T04:42:00.005Z] [ FLAGS  DIFF    ] : [mellanox amd64 bullseye ] 
[2023-09-20T04:42:00.005Z] /sonic/src/sonic-bgpcfgd /sonic
[2023-09-20T04:42:00.005Z] running pytest
[2023-09-20T04:42:00.005Z] Searching for netaddr==0.8.0
[2023-09-20T04:42:00.005Z] Best match: netaddr 0.8.0
[2023-09-20T04:42:00.005Z] 
[2023-09-20T04:42:00.005Z] Using /var/sw-r2d2-bot/.local/lib/python3.9/site-packages
[2023-09-20T04:42:00.005Z] running egg_info
[2023-09-20T04:42:00.005Z] writing sonic_bgpcfgd.egg-info/PKG-INFO
[2023-09-20T04:42:00.005Z] writing dependency_links to sonic_bgpcfgd.egg-info/dependency_links.txt
[2023-09-20T04:42:00.005Z] writing entry points to sonic_bgpcfgd.egg-info/entry_points.txt
[2023-09-20T04:42:00.005Z] writing requirements to sonic_bgpcfgd.egg-info/requires.txt
[2023-09-20T04:42:00.005Z] writing top-level names to sonic_bgpcfgd.egg-info/top_level.txt
[2023-09-20T04:42:00.005Z] reading manifest file 'sonic_bgpcfgd.egg-info/SOURCES.txt'
[2023-09-20T04:42:00.005Z] writing manifest file 'sonic_bgpcfgd.egg-info/SOURCES.txt'
[2023-09-20T04:42:00.005Z] running build_ext
[2023-09-20T04:42:00.005Z] Traceback (most recent call last):
[2023-09-20T04:42:00.005Z]   File "/sonic/src/sonic-bgpcfgd/setup.py", line 3, in <module>
[2023-09-20T04:42:00.005Z]     setuptools.setup(
[2023-09-20T04:42:00.005Z]   File "/usr/local/lib/python3.9/dist-packages/setuptools/__init__.py", line 163, in setup
[2023-09-20T04:42:00.005Z]     return distutils.core.setup(**attrs)
[2023-09-20T04:42:00.005Z]   File "/usr/lib/python3.9/distutils/core.py", line 148, in setup
[2023-09-20T04:42:00.005Z]     dist.run_commands()
[2023-09-20T04:42:00.006Z]   File "/usr/lib/python3.9/distutils/dist.py", line 966, in run_commands
[2023-09-20T04:42:00.006Z]     self.run_command(cmd)
[2023-09-20T04:42:00.006Z]   File "/usr/lib/python3.9/distutils/dist.py", line 985, in run_command
[2023-09-20T04:42:00.006Z]     cmd_obj.run()
[2023-09-20T04:42:00.006Z]   File "/usr/local/lib/python3.9/dist-packages/ptr.py", line 208, in run
[2023-09-20T04:42:00.006Z]     with self.project_on_sys_path():
[2023-09-20T04:42:00.006Z]   File "/usr/lib/python3.9/contextlib.py", line 117, in __enter__
[2023-09-20T04:42:00.006Z]     return next(self.gen)
[2023-09-20T04:42:00.006Z]   File "/usr/local/lib/python3.9/dist-packages/setuptools/command/test.py", line 168, in project_on_sys_path
[2023-09-20T04:42:00.006Z]     require('%s==%s' % (ei_cmd.egg_name, ei_cmd.egg_version))
[2023-09-20T04:42:00.006Z]   File "/usr/local/lib/python3.9/dist-packages/pkg_resources/__init__.py", line 899, in require
[2023-09-20T04:42:00.006Z]     needed = self.resolve(parse_requirements(requirements))
[2023-09-20T04:42:00.006Z]   File "/usr/local/lib/python3.9/dist-packages/pkg_resources/__init__.py", line 790, in resolve
[2023-09-20T04:42:00.006Z]     raise VersionConflict(dist, req).with_context(dependent_req)
[2023-09-20T04:42:00.006Z] pkg_resources.ContextualVersionConflict: (netaddr 0.9.0 (/var/sw-r2d2-bot/.local/lib/python3.9/site-packages), Requirement.parse('netaddr==0.8.0'), {'sonic-bgpcfgd'})
[2023-09-20T04:42:00.007Z] [  FAIL LOG END  ] [ target/python-wheels/bullseye/sonic_bgpcfgd-1.0-py3-none-any.whl ]
[2023-09-20T04:42:00.007Z] make: *** [slave.mk:881: target/python-wheels/bullseye/sonic_bgpcfgd-1.0-py3-none-any.whl] Error 1
[2023-09-20T04:42:00.007Z] make: *** Waiting for unfinished jobs....
2023-09-26 14:34:16 +08:00
mssonicbld
6a409ed495
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16642)
#### Why I did it
src/sonic-swss
```
* 0584d35b - (HEAD -> 202305, origin/202305) Revert "Support type7 encoded CAK key for macsec in config_db (#2892)" (3 minutes ago) [stormliang]
* 7097cf2b - Revert "[teamd]: Clean teamd process if LAG creation fails (#2888)" (3 days ago) [stormliang]
* a0eb0d07 - Support type7 encoded CAK key for macsec in config_db (#2892) (4 days ago) [judyjoseph]
* c7e5f10e - [teamd]: Clean teamd process if LAG creation fails (#2888) (4 days ago) [Lawrence Lee]
* f30b6107 - [CodeQL]: Use dependencies with relevant versions in azp template. (#2845) (4 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-09-25 18:34:17 +08:00
mssonicbld
0c60976b2a
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16677) 2023-09-25 18:06:05 +08:00
mssonicbld
94e65119ae
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16643) 2023-09-22 21:33:49 +08:00
mssonicbld
88bec29b52
[submodule] Update submodule sonic-platform-daemons to the latest HEAD automatically (#16641) 2023-09-22 21:20:29 +08:00
Dror Prital
81b5361b2a [Mellanox] Update SDK/FW to 4.6.1062/2012.1062 Update SDK/FW/SAI to 4.6.1062/2012.1062/SAIBuild2211.25.1.4 (#16478)
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE

SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support

SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.

- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
2023-09-22 14:34:08 +08:00
vganesan-nokia
52d5980c0c
[swss] Chassis db clean up optimization and bug fixes (#16454) (#16644)
* [swss] Chassis db clean up optimization and bug fixes

This commit includes the following changes:
    - Fix for regression failure due to error in finding CHASSIS_APP_DB in
    pizzabox (#PR 16451)
    - After attempting to delete the system neighbor entries from
    chassis db, before starting clearing the system interface entries,
    wait for sometime only if some system neighbors were deleted.
    If there are no system neighbors entries deleted for the asic coming up,
    no need to wait.
    - Similar changes for system lag delete. Before deleting the
    system lag, wait for some time only if some system lag memebers were
    deleted. If there are no system lag members deleted no need to wait.
    - Flush the SYSTEM_NEIGH_TABLE from the local STATE_DB. While asic
    is coming up, when system neigh entries are deleted from chassis ap
    db (as part of chassis db clean up), there is no orchs/process running to
    process the delete messages from chassis redis. Because of this, stale system
    neigh are entries present in the local STATE_DB. The stale entries result in
    creation of orphan (no corresponding data path/asic db entry) kernel neigh
    entries during STATE_DB:SYSTEM_NEIGH_TABLE entries processing by nbrmgr (after
    the swss serive came up). This is avoided by flushing the SYSTEM_NEIGH_TABLE from
    the local STATE_DB when sevice comes up.

Signed-off-by: vedganes <veda.ganesan@nokia.com>

* [swss] Chassis db clean up bug fixes review comment fix - 1

Debug logs added for deletion of other tables (SYSTEM_INTERFACE and SYSTEM_LAG_TABLE)

Signed-off-by: vedganes <veda.ganesan@nokia.com>

---------

Signed-off-by: vedganes <veda.ganesan@nokia.com>
(cherry picked from commit b13b41fc22)
2023-09-22 10:58:27 +08:00
mssonicbld
1749fad21d
[submodule] Update submodule sonic-linux-kernel to the latest HEAD automatically (#16639) 2023-09-22 02:03:10 +08:00
mssonicbld
d7014c6ecd
[submodule] Update submodule sonic-platform-common to the latest HEAD automatically (#16640) 2023-09-22 01:26:56 +08:00
Feng-msft
94696fe4cc Stop installing development packages from telemetry docker images to (#16603)
Stop installing development packages from telemetry docker images to avoid unnecessary space usage.

### Why I did it
From 202305, libswsscommon-dev and the Boost headers were brought in telemetry docker image incorrectly, which result in unnecessary space usage.

##### Work item tracking
- Microsoft ADO **(number only)**:25176224

#### How I did it
Remove  libswsscommon-dev accordingly.

#### How to verify it
Image building.
2023-09-22 00:36:18 +08:00
Pavan-Nokia
370980d42f [armhf][Nokia-7215]Add HWSKU files for new SAI (#16321)
Add new easy bringup (EZB) files for new SAI 1.12.0
2023-09-21 22:33:17 +08:00
anamehra
3bca122b29 Chassis: fix pmon docker failure when DEVICE_METADATA is not available (#16527)
Signed-off-by: anamehra anamehra@cisco.com

Added a check for DEVICE_METADATA before accessing the data. This prevents the j2 failure when var is not available.
2023-09-21 22:33:07 +08:00
mssonicbld
e7f49c9bce
Fix potentially not having any loopback address on lo interface (#16490) (#16628)
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.

Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.

Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
2023-09-21 20:40:21 +08:00
mssonicbld
1726eb3eb7
Update macsec CAK keys in profile for tests to change to type7 encoded format (#16388) (#16626)
* Change the CAK key length check in config plugin, macsec test profile changes

* Fix the format in add_profile api

The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.

Co-authored-by: judyjoseph <53951155+judyjoseph@users.noreply.github.com>
2023-09-21 20:39:01 +08:00
mssonicbld
a713299614
[Mellanox] Remove mlxtrace support for SPC4 (#16373) (#16625)
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.

- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files

Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Co-authored-by: Vadym Hlushko <62022266+vadymhlushko-mlnx@users.noreply.github.com>
2023-09-21 20:38:22 +08:00
Gokulnath Raja
8e85fba740 Upgrading hsflowd version from 2.0.35 to 2.0.51-26 to address for [sflow]ERR sflow#hsflowd: device Loopback0 Get SIOCGIFFLAGS failed : No such device #13407 (#15362)
Signed-off-by: Gokulnath-Raja <Gokulnath_R@dell.com>
Co-authored-by: mohanapriya-meganathan <mohanapriya.m1@dell.com>
2023-09-21 18:34:19 +08:00
Alpesh Patel
6b48346ff5 qos template change for backend compute-ai deployment (#16150)
#### Why I did it

To enable qos config for a certain backend deployment mode, for resource-type "Compute-AI".
This deployment has the following requirement:

- Config below enabled if DEVICE_TYPE as one of backend_device_types
- Config below enabled if ResourceType is 'Compute-AI'
- 2 lossless TCs' (2, 3)
- 2 lossy TCs' (0,1)
- DSCP to TC map uses 4 DSCP code points and maps to the TCs' as follows:
   "DSCP_TO_TC_MAP": {
        "AZURE": {
             "48" : "0",
            "46" : "1",
            "3"  : "3",
            "4"  : "4"
        }
    }

- WRED profile has green {min/max/mark%} as {2M/10M/5%}

This required template change <as in the PR> in addition to the vendor qos.json.j2 file (not included here).

### How I did it

#### How to verify it
- with the above change and the vendor config change, generated the qos.json file and verified that the objective stated in "Why I did it" was met

- verified no error

### Description for the changelog
Update qos_config.j2 for Comptue-AI deployment on one of backend device type roles
2023-09-21 18:34:11 +08:00
Kebo Liu
27f15d40e1 [Mellanox] Update HW-MGMT package to new version V.7.0030.1011 (#16239)
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems

- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list

Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-09-21 18:34:07 +08:00
Zhijian Li
60f56101fb [YANG SONIC-ACL] Fix Yang definition of ACL_TABLE_TYPE (#16247)
How I did it
Update Yang definition of ACL_TABLE_TYPE.
Update existing testcase.
Add new testcase to cover lowercase key scenario.

How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
2023-09-21 18:34:01 +08:00
Rajkumar-Marvell
1768cdbcff [Marvell] Update armhf sai debian to add SAI 1.12 support (#16299)
- SAI 1.12 support

Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
2023-09-21 18:33:57 +08:00
snider-nokia
5819846c61 [Nokia][sonic-platform] Update Nokia sonic-platform submodule (#16348)
This likely fixes Nokia-ION/ndk#21

To fix a failure that results when edge condition results in MDIPC channel being freed with mismatched ownership.
2023-09-21 18:33:53 +08:00
Prince George
d5a96f69f1 [platform]: Disable interrupt for intel i2c-i801 driver (#16309)
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.

We now disable the i801 driver interrupt and instead enable polling

Microsoft ADO (number only): 24910530

How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver

How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-

- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3

Signed-off-by: Prince George <prgeor@microsoft.com>
2023-09-21 16:33:37 +08:00
Aravind Mani
f57a3e64d0 [devices]: Dell S6100 API 2.0 fix (#16363)
Why I did it
sonic-mgmt test failure is seen for update_firmware component API

Microsoft ADO: 25208748

How I did it
Edited API 2.0 to fix this issue.

How to verify it
Run sonic-mgmt test after the fix and verify it passes.
2023-09-21 16:33:23 +08:00
Stephen Sun
a49860cc7f Add yang model for scheduler in PORT_QOS_MAP (#16244)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
2023-09-19 14:33:44 +08:00
mssonicbld
e0744e8b66
[FRR] Adding patches for CVE-2023-41360 and CVE-2023-41359 (#16528) (#16581) 2023-09-18 21:27:41 +08:00
StormLiangMS
2b381b1fd4
Revert "revert [syslog] Add remote syslog configuration (cherry-pick to 202305) (#15897) (#16179)" (#16549)
This reverts commit 164fa102c0.
2023-09-14 20:52:14 +08:00
mssonicbld
1355839b30
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16441) 2023-09-14 14:42:36 +08:00
Kebo Liu
fe7eeed051
[202305][Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3(#16096) (#16298)
* [Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096)

SONiC changes:
1. Support Spectrum4 ASIC FW binary building.
2. Support new SDK sx-obj-desc lib building since new SAI need it.
3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3

SDK/FW bug fixes
1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.

SDK/FW Features
1. On SN2700 all ports can support y cable by credo

SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE

SAI features
1. Port init profile

- How I did it
Update SDK/FW/SAI make files

- How to verify it
Run full sonic-mgmt regression on Mellanox platform

Signed-off-by: Kebo Liu <kebol@nvidia.com>
Conflicts:
	platform/mellanox/mlnx-sai.mk

* Fix issue: unprintable character is rendered when handling comments in j2

Use "{#-" and "-#}" to mark comments in jinja template

Signed-off-by: Stephen Sun <stephens@nvidia.com>

---------

Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
2023-09-10 22:28:46 +08:00
Samuel Angebault
6adbd770f4
[202305][Arista] Update platform library submodules (#16375)
- Ignore intermittent IO errors during get_change_event in the Platform API
- Fix tunings for some ports on CatalinaDD
2023-09-08 23:42:18 -07:00
mssonicbld
30378b4baf
[submodule] Update submodule sonic-platform-common to the latest HEAD automatically (#16395) 2023-09-05 00:40:27 +08:00
Pavan-Nokia
393c6911c5 [Nokia-7215-A1] Update Nokia-7215-A1 platform (#15342)
Update Nokia-7215-A1 platform to address UT and OC test failures
2023-09-05 00:35:18 +08:00
mssonicbld
fec89be477
[submodule] Update submodule sonic-linux-kernel to the latest HEAD automatically (#16431)
#### Why I did it
src/sonic-linux-kernel
```
* 9cb7ea0 - (HEAD -> 202305, origin/202305) arm64: dts: marvell: Add Nokia 7215-IXS-A1 board (#321) (24 hours ago) [Pavan-Nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-09-04 16:33:09 +08:00
mssonicbld
8b7e74b7e2
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16432) 2023-09-04 16:17:43 +08:00
jcaiMR
a30ccb5148
advance dhcpmon to a3c5381 (#16376)
Why I did it
Advance dhcpmon to a3c5381 in 202305 branch.

a3c5381 - (HEAD, origin/master, origin/HEAD, master) Merge pull request src: Add libnl3 build.sh script #11 from jcaiMR/dev/jcai_fix_err_log (11 days ago) [StormLiangMS]
c5ef7e7 - Change common_libs dependencies from buster to bullseye (Updating docker-orchagent/syncd Dockerfile and start.sh #9)
824a144 - replace atoi with strtol (Rename hostname #6) (10 weeks ago) [Mai Bui]
32c0c3f - Fix libswsscommon package installation for non-amd64 (README.md leaves out docker-database #7) (10 weeks ago) [Saikrishna Arcot]
Work item tracking
Microsoft ADO (25048723):
How I did it
How to verify it
Run test_dhcp_relay.py, no failure
2023-09-04 09:33:20 +08:00
mssonicbld
ebe24a134c
[chassis] Chassis DB cleanup when asic comes up (#16213) (#16417) 2023-09-03 23:52:39 +08:00
mssonicbld
fdc4c039b8
[Nokia-IXR7250E] Modify the platform_ndk.json for Nokia-IXR7250E platform (#16355) (#16428) 2023-09-03 22:19:40 +08:00
mssonicbld
40a5cea84c
Assign the higher metric value for Ipv6 default route learnt via RA message (#16367) (#16429) 2023-09-03 22:16:46 +08:00
mssonicbld
63801d5bf7
[Mellanox][SFP] Remove unused function parameter (#16318) (#16424) 2023-09-03 22:15:30 +08:00
mssonicbld
1fca6fcfba
[chassis][voq] Fix to ignore duplicate nexthop in zebra (#16275) (#16420) 2023-09-03 21:33:29 +08:00
mssonicbld
d62ae374a9
chassis-packet: Update arp_update script for FAILED and STALE check (#16311) (#16423) 2023-09-03 21:24:17 +08:00
mssonicbld
5e4cda9c1c
Fix openconfig_acl.py (#16303) (#16422) 2023-09-03 21:22:49 +08:00
mssonicbld
a897f1e312
[P4RT]Disabling p4rt by default to overcome build issues (#16343) (#16427) 2023-09-03 21:11:22 +08:00
mssonicbld
1cac2b6fb8
add processor.max_cstate=0 to intel cpu cmdline (#16339) (#16425) 2023-09-03 21:07:58 +08:00
Rajkumar-Marvell
2db19c2568 [SFLOW] Fixed SFLOW DROPMON patch to align with 2.0.45 version (#15948)
- Why I did it
Fixed build failure when flag ENABLE_SFLOW_DROPMON=y set

- How I did it
Fixed sflow dropmon patch to align with hsflowd version 2.0.45

Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
2023-09-03 20:44:46 +08:00
Marty Y. Lok
5774ce2206 [Nokia][DeviceData] Update the Nokia platform IXR-7250E device data (#16028)
Why I did it
Update the platform_reboot of Nokia Platform IXR-7250E-36x400G to displays the correct reboot-cause history when reboot from supervisor card.

Work item tracking
Microsoft ADO (number only):
How I did it
Modify the platform_reboot script to copy the correct reboo-cause.txt file from NDK to the /host/reboot-cause directory at the down cycle when the reboot is issued from Supervisor (for both reboot right after install a new image and normal reboot)

Signed-off-by: mlok <marty.lok@nokia.com>
2023-09-03 20:44:41 +08:00
Junchao-Mellanox
d13341fd9b [Mellanox] Fix issue: watchdogutil command does not work (#16091)
- Why I did it
watchdogutil uses platform API watchdog instance to control/query watchdog status. In Nvidia watchdog status, it caches "armed" status in a object member "WatchdogImplBase.armed". This is not working for CLI infrastructure because each CLI will create a new watchdog instance, the status cached in previous instance will totally lose. Consider following commands:

admin@sonic:~$ sudo watchdogutil arm -s 100      =====> watchdog instance1, armed=True
Watchdog armed for 100 seconds
admin@sonic:~$ sudo watchdogutil status             ======> watchdog instance2, armed=False
Status: Unarmed
admin@sonic:~$ sudo watchdogutil disarm            =======> watchdog instance3, armed=False
Failed to disarm Watchdog

- How I did it
Use sysfs to query watchdog status

- How to verify it
Manual test
Unit test
2023-09-03 20:44:36 +08:00
Saikrishna Arcot
dc3991309b Remove depot_tools repo (#16114)
It appears that this was initially added to provide the git-retry
command (which doesn't appear to be used today). However, this repo is
now also providing bazel (which is actually used in our build today),
and this command (along with git-retry) expects some vpython3 binary to
be set up/installed.

Rather than going through that, just get rid of this repo.
2023-09-03 20:44:32 +08:00
Kebo Liu
9d4d3af5e6 [Mellanox] Update MFT to newer version 4.25.0-62 (#16149)
- Why I did it
Update Mellanox MFT tool to version 4.25.0-62

- How I did it
Update the MFT tool make file

- How to verify it
Run full sonic-mgmt regression.

Signed-off-by: Kebo Liu <kebol@nvidia.com>
2023-09-03 20:44:29 +08:00
Zain Budhwani
821177f47f [eventd]: Remove unnecessary log (#16166)
Work item tracking
Microsoft ADO (number only): 16789053
2023-09-03 20:44:25 +08:00
Senthil Kumar Guruswamy
dee901bd80 Handle service start-limit-hit failure event case in sysmonitor (#16174) 2023-09-03 20:44:20 +08:00
Yaqiang Zhu
8f415c004b [yang] Add Bmc to Device Neighbor Metadata element type list (#16188)
Bmc is a valid neighbor type in minigraph, however it was missing from the YANG model definition. Usually, the Bmc type device can be neighbor of BmcMgmtToRRouter. This PR is to introduce this type.
2023-09-03 20:44:16 +08:00
Aravind Mani
82dfe0db78 Dell S6100 Platform API 2.0 fixes (#16208)
Why I did it
Dell S6100 Platform components needs to be updated.

How I did it
Modified platform.json to fix the issue.

How to verify it
Run sonic-mgmt component test and check whether it passes.
2023-09-03 20:44:11 +08:00
Zhijian Li
2941df3289 [minigraph-parser] Update the definition of acl table type BMCDATA and BMCDATAV6 (#16249)
Why I did it
According to ACL-Table-Type-HLD, the value type of MATCHES, ACTIONS and BIND_POINTS should be list instead of string. Opening this PR to update the definition of BMCDATA and BMCDATAV6.

How I did it
Update the definition of BMCDATA and BMCDATAV6 in minigraph-parser.

How to verify it
Verified by UT and build SONiC image.
2023-09-03 20:44:05 +08:00
mssonicbld
82fa2d6a26
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16396)
#### Why I did it
src/sonic-swss
```
* c869c1df - (HEAD -> 202305, origin/202305) update portStatIds for cisco (#2876) (11 minutes ago) [Zhixin Zhu]
* dd152288 - [Dynamic Buffer][Mellanox] Skip PGs in pending deleting set while checking accumulative headroom of a port (#2871) (12 minutes ago) [Stephen Sun]
* 97068ff1 - Fix error in peer response time when headroom is calculated for 800G (#2860) (16 minutes ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-09-03 18:32:58 +08:00
Junchao-Mellanox
cead17cb55 Fix issue: systemctl daemon-reload would sporadically cause udev handler fail (#15253)
#### Why I did it

A workaround to back port the fix for a systemd issue.

The systemd issue: https://github.com/systemd/systemd/issues/24668
The systemd PR to fix the issue: https://github.com/systemd/systemd/pull/24673/files

The formal solution should upgrade systemd to a version that contains the fix. But, systemd is a very basic service, upgrading systemd requires heavy test. 

#### How I did it
Copy the correct systemd-udevd.service file in build time 

#### Tested branch (Please provide the tested image version)

- [x] 202211
- [ ] <!-- image version 2 -->

```
SONiC Software Version: SONiC.fix-udev.3-b65c7bdec_Internal
SONiC OS Version: 11
Distribution: Debian 11.7
Kernel: 5.10.0-18-2-amd64
Build commit: b65c7bdec
Build date: Mon Jun 19 10:54:50 UTC 2023
Built by: sw-r2d2-bot@r-build-sonic-ci02-241

Platform: x86_64-mlnx_msn4700-r0
HwSKU: ACS-MSN4700
ASIC: mellanox
ASIC Count: 1
Serial Number: MT2022X08597
Model Number: MSN4700-WS2FO
Hardware Revision: A1
Uptime: 08:10:11 up 1 min,  1 user,  load average: 1.81, 0.67, 0.24
Date: Sun 25 Jun 2023 08:10:11

Docker images:
REPOSITORY                    TAG                             IMAGE ID       SIZE
docker-fpm-frr                fix-udev.3-b65c7bdec_Internal   a7b911e7cb6f   346MB
docker-fpm-frr                latest                          a7b911e7cb6f   346MB
docker-platform-monitor       fix-udev.3-b65c7bdec_Internal   94c5178cf80b   731MB
docker-platform-monitor       latest                          94c5178cf80b   731MB
docker-orchagent              fix-udev.3-b65c7bdec_Internal   46b393e0ace8   328MB
docker-orchagent              latest                          46b393e0ace8   328MB
docker-syncd-mlnx             fix-udev.3-b65c7bdec_Internal   1f5c6c23e33a   734MB
docker-syncd-mlnx             latest                          1f5c6c23e33a   734MB
docker-sflow                  fix-udev.3-b65c7bdec_Internal   7e45992c8c59   317MB
docker-sflow                  latest                          7e45992c8c59   317MB
docker-teamd                  fix-udev.3-b65c7bdec_Internal   e4d905592cda   316MB
docker-teamd                  latest                          e4d905592cda   316MB
docker-nat                    fix-udev.3-b65c7bdec_Internal   7fe799367580   319MB
docker-nat                    latest                          7fe799367580   319MB
docker-macsec                 latest                          d702a5554171   318MB
docker-snmp                   fix-udev.3-b65c7bdec_Internal   3bce8fcf71cd   338MB
docker-snmp                   latest                          3bce8fcf71cd   338MB
docker-sonic-telemetry        fix-udev.3-b65c7bdec_Internal   f13949cbc817   597MB
docker-sonic-telemetry        latest                          f13949cbc817   597MB
docker-dhcp-relay             latest                          153d9072805d   306MB
docker-router-advertiser      fix-udev.3-b65c7bdec_Internal   aed642b9a6bc   299MB
docker-router-advertiser      latest                          aed642b9a6bc   299MB
docker-sonic-p4rt             fix-udev.3-b65c7bdec_Internal   a3cae5ca65a7   870MB
docker-sonic-p4rt             latest                          a3cae5ca65a7   870MB
docker-mux                    fix-udev.3-b65c7bdec_Internal   b81f0401b9a8   347MB
docker-mux                    latest                          b81f0401b9a8   347MB
docker-eventd                 fix-udev.3-b65c7bdec_Internal   c5917d0e801f   298MB
docker-eventd                 latest                          c5917d0e801f   298MB
docker-lldp                   fix-udev.3-b65c7bdec_Internal   fd5dc14a7976   341MB
docker-lldp                   latest                          fd5dc14a7976   341MB
docker-database               fix-udev.3-b65c7bdec_Internal   438c2715a1dd   299MB
docker-database               latest                          438c2715a1dd   299MB
docker-sonic-mgmt-framework   fix-udev.3-b65c7bdec_Internal   5c50b115fbcd   414MB
docker-sonic-mgmt-framework   latest  
```
2023-09-03 18:32:54 +08:00
kenneth-arista
9a5c188b3c Add YANG model for FABRIC_PORT (#15629)
#### Why I did it

Introduce YANG model for FABRIC in CONFIG_DB, which was added in https://github.com/sonic-net/sonic-buildimage/pull/14170.

#### How I did it

This is a clone of @jfeng-arista's PR https://github.com/sonic-net/sonic-buildimage/pull/14282 to resolve conflicts with upstream changes. 

#### How to verify it

Passing pipeline build is sufficient.
2023-09-03 18:32:51 +08:00
Kebo Liu
8253fd5c07 [Mellanox] Update SAI build procedure (#15728)
= Why I did it
To optimize Mellanox platform SAI build

- How I did it
SAI debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release.

- How to verify it
Configure/build for Mellanox platform, check the image and ensure that correct SAI debs are included.
2023-09-03 18:32:47 +08:00
Vadym Hlushko
b7dfc5b280 [memory_checker] Add a specific log message in a case when the docker service is not running. (#16018)
#### Why I did it
To fix the logic introduced by [[memory_checker] Do not check memory usage of containers which are not created #11129](https://github.com/sonic-net/sonic-buildimage/pull/11129).
There could be a scenario before the reboot, where
1. The `docker service` has stopped
2. In a very short period of time, the monit service performs the `root@sonic:/home/admin# monit status container_memory_telemetry`

In such scenario, the `memory_checker` script will throw an error to the syslog:
```
ERR memory_checker: Failed to retrieve the running container list from docker daemon! Error message is: 'Error while fetching server API version: ('Connection aborted.', FileNotFoundError(2, 'No such file or directory'))'
```
But, actually, this scenario is a correct behavior, because when the docker service is stopped, the Unix socket is destroyed and that is why we could see the `FileNotFoundError(2, 'No such file or directory'` exception in the syslog.

#### How I did it
Change the log severity to the warning and changed the return value.

#### How to verify it
It is really hard to catch the exact moment described in the `Why I did it` section.
In order to check the logic:
1. Change the Unix socket path to non-existing in [/usr/bin/memory_checker](47742dfc2c/files/image_config/monit/memory_checker (L139)) file on the switch.
2. Execute the `root@sonic:/home/admin# monit restart container_memory_telemetry`
3. Check the syslog for such messages:
```
WARNING memory_checker: Failed to retrieve the running container list from docker daemon! Error message is: 'Error while fetching server API version: ('Connection aborte
d.', FileNotFoundError(2, 'No such file or directory'))'

INFO memory_checker: [memory_checker] Exits without checking memory usage since container 'telemetry' is not running!
```
2023-09-03 18:32:43 +08:00
judyjoseph
edc1e48c17 sudo not required explicitly as /bin/ip netns identify is part of READ_ONLY_CMDS in sudoers file (#16115)
Why I did it
Few commands in multiasic platforms when run with the "sudo ip netns exec asic0 " option was taking like 15 mins to get the o/p. This behavior of sudo getting hung was seen by just doing this

jujoseph@svcstr-server-2:~ sudo ip netns exec asic0 bash
jujoseph@svcstr-server-2:~ sudo ls

deally sudo is not needed as we have /bin/ip netns identify present in /etc/sudoers file. Hence removing it
2023-09-03 18:32:38 +08:00
Junchao-Mellanox
6c9c2cca42 [Mellanox] Revise label name and fix typo in sensor.conf of 4600C (#16271)
- Why I did it
Revise lable name and fix typo in sensor.conf of 4600C

- How I did it
Revise lable name and fix typo in sensor.conf of 4600C

- How to verify it
Manual test
sonic-mgmt test_sensors.py
2023-09-03 18:32:30 +08:00
xumia
288ebd5dd3 Support FIPS DB configuration (#15632)
Why I did it
Support FIPS DB configuration
Design Doc: sonic-net/SONiC#1372

Work item tracking
Microsoft ADO (number only): 24411148
How I did it
Add the FIPS Yang model to make FIPS configurable in ConfigDB.

How to verify it
See TestPlan: sonic-net/sonic-mgmt#9092
Build the image and run the tests: sonic-net/sonic-mgmt#9091
2023-09-03 16:33:25 +08:00
Vivek
1908a04fdf [Mellanox] [SN4410] Support new breakout modes for PAM4 (#15668)
- Why I did it
Add new breakout modes to be used in PAM4 supported cables

- How I did it

- How to verify it
Verified the 50G per lane breakout modes are applied properly on the switch

Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
2023-09-03 16:33:21 +08:00
Nazarii Hnydyn
dd08437b3d [Mellanox] [PPI] Enable global port late create for SN5600 (#15866)
- Why I did it
Enabled port late create on SN5600 Spectrum-4 switch boots up with no ports

Work item tracking
N/A

- How I did it
Updated SAI xml config file

- How to verify it
Run sonic-mgmt tests of fastboot

Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
2023-09-03 16:33:15 +08:00
Vadym Hlushko
1f1ae60961 [Mellanox] Change SDK API sx_mgmt_phy_module_info_get() to sysfs (#15963)
- Why I did it
Change Mellanox platform API implementation to use ASIC driver sysfs for the module operational state and status error fields.

- How I did it
Modify the platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py file by change the call of sx_mgmt_phy_module_info_get() SDK API to sysfs

- How to verify it
Simulate the unplug cable event
Check the CLI output
sfputil show presence
sfputil show error-status -hw
Simulate the plug cable event
Repeat 2 step

Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
2023-09-03 16:33:10 +08:00
StormLiangMS
7b8906600c
add sonic release for 202305 (#16364) 2023-09-03 09:23:39 +08:00
andywongarista
f0823e6dd0
[Arista] Add support for DCS-7060DX5-32 (#14793) (#16176)
* Add asic support for blackhawkth4dd

* Add bfd feature to BlackhawkTh4Dd

* Add platform data for blackhawkth4

* Add Qos settings for Blackhawk-TH4

* Add pg and queue settings for Blackhawk-TH4

* Add buffers_defaults_t0.j2

* Add blackhawkth4 to boot0

* Update 7060dx5 config.bcm

* Fix build error

---------

Co-authored-by: Boyang Yu <byu@arista.com>
Co-authored-by: David Meggy <davidm@arista.com>
2023-09-03 09:21:33 +08:00
Liping Xu
863a062c56 update DOCKER_RAMFS_SIZE (#16305)
Why I did it
docker folder size on 202305 image is more than 1.5G. larger than the max size of docker ramfs size.

Work item tracking
Microsoft ADO (number only):
24969589
How I did it
Update the docker ramfs size from 1500M to 2500M

How to verify it
Boot 202305 image.
2023-08-31 22:32:29 +08:00
mssonicbld
adfc486456
Run db_migrator for non first-time reboots (#16116) (#16306) 2023-08-29 05:36:36 +08:00
mssonicbld
f0b03b7f97
[submodule] Update submodule sonic-sairedis to the latest HEAD automatically (#16292) 2023-08-26 15:33:51 +08:00
Zhijian Li
2ea5a05b51 [YANG SONIC-ACL] Fix Yang definition of IN_PORTS and OUT_PORTS (#16220)
How I did it
Update Yang definition of IN_PORTS and OUT_PORTS to string.
Since we cannot split the string with comma (,) and validate each substring is a valid SONiC port name. The only restriction for them is must be a string.

How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Build a SONiC image based on 202205 branch and installed on physical DUT. Re try the steps in [Yang] Incorrect definition of IN_PORTS and OUT_PORTS in sonic-acl.yang #16190 and can see below success response:
2023-08-25 14:33:03 +08:00
Vaibhav Hemant Dixit
0b83639068
Fix CONFIG_DB_INITIALIZED flag check logic and set/reset flag for warmboot (#15685) (#16217)
Cherypick of #15685

MSFT ADO: 24274591

Why I did it
Two changes:

1 Fix a day1 issue, where check to wait until CONFIG_DB_INITIALIZED is incorrect.
There are multiple places where same incorrect logic is used.

Current logic (until [[ $($SONIC_DB_CLI CONFIG_DB GET "CONFIG_DB_INITIALIZED") ]];) will always result in pass, irrespective of the result of GET operation.

root@str2-7060cx-32s-29:~# sonic-db-cli CONFIG_DB GET "CONFIG_DB_INITIALIZED"
1
root@str2-7060cx-32s-29:~# until [[ $(sonic-db-cli CONFIG_DB GET "CONFIG_DB_INITIALIZED") ]]; do echo "entered here"; done
root@str2-7060cx-32s-29:~# 

root@str2-7060cx-32s-29:~# 
root@str2-7060cx-32s-29:~# sonic-db-cli CONFIG_DB GET "CONFIG_DB_INITIALIZED"                                             
0
root@str2-7060cx-32s-29:~# until [[ $(sonic-db-cli CONFIG_DB GET "CONFIG_DB_INITIALIZED") ]]; do echo "entered here"; done
root@str2-7060cx-32s-29:~# 
Fix this logic by checking for value of flag to be "1".

root@str2-7060cx-32s-29:~# until [[ $(sonic-db-cli CONFIG_DB GET "CONFIG_DB_INITIALIZED") -eq 1 ]]; do echo "entered here"; done
entered here
entered here
entered here
This gap in logic was highlighted when another fix was merged: #14933
The issue being fixed here caused warmboot-finalizer to not wait until config-db is initialized.

2 Set and unset CONFIG_DB_INITIALIZED for warm-reboot case
Currently, during warm shutdown CONFIG_DB_INITIALIZED's value is stored in redis db backup. This is restored back when the dump is loaded during warm-recovery.
So the value of CONFIG_DB_INITIALIZED does not depend on config db's state, however it remain what it was before reboot.

Fix this by setting CONFIG_DB_INITIALIZED to 0 as when the DB is loaded, and set it to 1 after db_migrator is done.

Work item tracking
Microsoft ADO (number only):
How I did it
How to verify it
2023-08-24 16:58:24 +08:00
mssonicbld
875b81e407
[Mellanox] Add mlxtrace to techsupport (#15961) (#16215) 2023-08-20 23:51:38 +08:00
mssonicbld
8e749e957a
[frr]: FRR 8.5.1 integration changes (#15965) (#16212) 2023-08-19 21:06:09 +08:00
StormLiangMS
164fa102c0
revert [syslog] Add remote syslog configuration (cherry-pick to 202305) (#15897) (#16179) 2023-08-19 16:01:29 +08:00
mssonicbld
fdcbc38b52
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16195) 2023-08-18 23:09:18 +08:00
mssonicbld
4c160ffbe4
[submodule] Update submodule linkmgrd to the latest HEAD automatically (#16152)
#### Why I did it
src/linkmgrd
```
* 40113fd - (HEAD -> 202305, origin/202305) [active-standby] Fix extra toggle observed in `config reload` (#216) (2 days ago) [Longxiang Lyu]
* b6d40fc - Add ADO to the PR template (#215) (2 days ago) [Longxiang Lyu]
* fe41ad2 - [active-standby] Write `unhealthy` is default route `N/A` (#214) (2 days ago) [Longxiang Lyu]
* 8ff265c - [link prober] Increase pause/restart probe log verbosity (#213) (2 days ago) [Longxiang Lyu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-16 18:32:40 +08:00
mssonicbld
98646be38a
[submodule] Update submodule sonic-platform-daemons to the latest HEAD automatically (#16156)
#### Why I did it
src/sonic-platform-daemons
```
* 4688e1e - (HEAD -> 202305, origin/202305) [PSU power threshold] Fix logic error: compare the system power with the PSU's power threshold (#367) (2 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-16 16:32:48 +08:00
Jing Zhang
0352c83fb5 add service_mgmt (#15927)
Adding yang model for CONFIG_DB table MUX_LINKMGR|SERVICE_MGMT.

sign-off: Jing Zhang zhangjing@microsoft.com
2023-08-16 14:32:47 +08:00
mssonicbld
8ef188169e
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16158)
#### Why I did it
src/sonic-swss
```
* 6b0c8c5c - (HEAD -> 202305, origin/202305) [muxorch] set mux state to init upon warm reboot (#2834) (18 hours ago) [Nikola Dancejic]
* bc9bde94 - [ASAN] Fix Indirect Mem Leaks in Orchagent (#2869) (24 hours ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-15 18:32:23 +08:00
mssonicbld
bf1be5f3e8
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16120) 2023-08-15 16:52:43 +08:00
Baorong Liu
6016b2ba57 [staticroutebfd] fix static route uninstall issue when all nexthops are not reachable (#15575)
fix static route uninstall issue when all nexthops are not reachable.
the feature was working but the bug was introduced when support dynamic bfd enable/disable. Added UT testcase to guard this.
2023-08-15 16:32:34 +08:00
vmittal-msft
7b7aae981a Updated PG headroom settings for 40g port speed (#16038) 2023-08-15 16:32:30 +08:00
Zhaohui Sun
2bc65aa7ba
[202305]Change orchagent pop batch size from 8192 to 1024 (#16127)
### Why I did it
Background running lua script may cause redis-server quite busy if batch size is 8192.
If handling time exceeded default 5s, the redis-server will not response to other process and will cause syncd crash.

```
Aug  9 07:46:29.512326 str-s6100-acs-5 INFO database#supervisord: redis 68:M 09 Aug 2023 07:46:29.511 # Lua slow script detected: still in execution after 5186 milliseconds. You can try killing the script using the SCRIPT KILL command. Script SHA1 is: 88270a7c5c90583e56425aca8af8a4b8c39fe757
Aug  9 07:46:29.523716 str-s6100-acs-5 ERR syncd#syncd: :- checkReplyType: Expected to get redis type 5 got type 6, err: BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.
Aug  9 07:46:29.524818 str-s6100-acs-5 INFO syncd#supervisord: syncd terminate called after throwing an instance of '
Aug  9 07:46:29.525268 str-s6100-acs-5 ERR pmon#CCmisApi: :- checkReplyType: Expected to get redis type 5 got type 6, err: BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.
Aug  9 07:46:29.526148 str-s6100-acs-5 INFO syncd#supervisord: syncd std::system_error'
Aug  9 07:46:29.528308 str-s6100-acs-5 ERR pmon#psud[32]: :- checkReplyType: Expected to get redis type 5 got type 6, err: BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.
Aug  9 07:46:29.529048 str-s6100-acs-5 ERR lldp#python3: :- guard: RedisReply catches system_error: command: *2#015#012$3#015#012DEL#015#012$27#015#012LLDP_ENTRY_TABLE:Ethernet37#015#012, reason: BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.: Input/output error
Aug  9 07:46:29.529720 str-s6100-acs-5 ERR snmp#python3: :- guard: RedisReply catches system_error: command: *2#015#012$7#015#012HGETALL#015#012$28#015#012COUNTERS:oid:0x100000000000a#015#012, reason: BUSY Redis is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.: Input/output error
```

88270a7c5c90583e56425aca8af8a4b8c39fe757 is /usr/share/swss/consumer_state_table_pops.lua
##### Work item tracking
- Microsoft ADO **24741990**:

#### How I did it
Change batch size from 8192 to 1024.

#### How to verify it
Run all test cases in sonic-mgmt to verify the system stability.

### Tested branch (Please provide the tested image version)

- [x] 20220531.36
2023-08-14 17:53:08 -07:00
Stephen Sun
f25dcef032 Update the description message of PSU power threshold checking in system health (#15289)
- Why I did it
Adjust PSU power threshold logic in system health.

- How I did it
Update the description message in PSU power threshold checking
power of PSU x (xx w) exceeds threshold (xx w) => System power exceeds xx threshold (xx w)

- How to verify it
Manual test and unit test
2023-08-15 04:32:43 +08:00
Vaibhav Hemant Dixit
2969d84e58 Revert "Revert "Fix for fast/cold-boot: call db_migrator only after old config is loaded (#14933)" (#15464)" (#15684)
This reverts commit 9649a44470.
2023-08-15 04:32:38 +08:00
abdosi
15a39ac806 Fix the Loopback0 IPv6 address of LC's in chassis not reachable from (#16026)
What I did:
Fix the Loopback0 IPv6 address of LC's in chassis not reachable from peer devices.

Why I did:
For Ipv6 Loopback0 address we only advertise /64 subnet to the peer devices. However, in case of chassis each LC will have it own /128 address of that /64 subnet . Since this /128 address does not get advertised peer devices can-not ping/reach the LC's loopback0.

How I fix:
Advertise /128 Loopback0 Ipv6 address only between i-BGP peers. This way even though /64 is advertised to e-BGP peer devices when packet reaches any of LC's it can reach the appropriate LC's.

How I verify:
Manual verification
UT added for same.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
2023-08-15 04:32:34 +08:00
pavannaregundi
6876f27374 [Marvell] Fix get_system_mac for system without eeprom (#15376)
Why I did it
get_system_mac was returning 'None' mac for system without eeprom.
get_system_mac for marvell platform checks for mac in eeprom, profile.ini(hwsku file) and eth0. Check for valid mac returned by syseeprom was incorrect. Which was resulting in bypassing mac get from profile.ini and eth0.

How I did it
get_system_mac already has a logic to get first valid mac.
Removed null check for mac returned by eeprom.
Corrected the check for profile.ini file by checking if file exist.

How to verify it
Executed sonic-cfggen to check valid mac address is getting configured in config_db.json with/without profile.ini.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
2023-08-15 04:32:30 +08:00
Yevhen Fastiuk
4602d30a73
[syslog] Add remote syslog configuration (cherry-pick to 202305) (#15897)
cherry-pick: #14513
depends: https://github.com/sonic-net/sonic-utilities/pull/2939

* Add an ability to configure remote syslog servers
* Add an initial configuration for remote syslog
* Extend YANG module and add unit tests

#### Why I did it
Adding the following functionality to rsyslog feature:

* Configure remote syslog servers: protocol, filter, severity level
* Update global syslog configuration: severity level, message format

#### How I did it
added parameters to syslog server and global configuration.

#### How to verify it
create syslog server using CLI/adding to Redis-DB
verify server is added to file /etc/rsyslog.conf and server is functional.

#### Description for the changelog
extend rsyslog capabilities, added server and global configuration parameters.

#### Link to config_db schema for YANG module changes
[sonic-syslog.yang](https://github.com/sonic-net/sonic-buildimage/blob/master/src/sonic-yang-models/yang-models/sonic-syslog.yang)
2023-08-14 13:12:33 -07:00
mssonicbld
ac34681b92
Update the iSMART_64 tool (#15936) (#16139)
Why I did it
Updating the iSMART_64 tool for supporting latest debian releases.

How I did it
On branch new_ismart
Changes to be committed:
(use "git restore --staged ..." to unstage)
modified: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iSMART_64

How to verify it
In s6100, run the iSMART_64 tool.
md5sum - 24725730d7649769c7ba50971c1f2955

Co-authored-by: Santhosh Kumar T <53558409+santhosh-kt@users.noreply.github.com>
2023-08-14 22:42:30 +08:00
mssonicbld
75b7ec361c
[Mellanox] Add more unit test coverage for platform API (#15842) (#16137)
- Why I did it
Increase UT coverage for Nvidia platform API code

Work item tracking
Microsoft ADO (number only):

- How I did it
Focus on low coverage file:
1. component.py
2. watchdog.py
3. pcie.py

- How to verify it
Run the unit test, the coverage has been changed from 70% to 90%

Co-authored-by: Junchao-Mellanox <57339448+Junchao-Mellanox@users.noreply.github.com>
2023-08-14 22:40:38 +08:00
mssonicbld
3119077744
Update usage leaf in sonic-events-host yang models (#15805) (#16136)
#### Why I did it

event yang models for usage currently use int as type for usage leaf, needs to be of type decimal64

##### Work item tracking
- Microsoft ADO **(number only)**:17747466

#### How I did it

Update yang models and UT

#### How to verify it

UT

Co-authored-by: Zain Budhwani <99770260+zbud-msft@users.noreply.github.com>
2023-08-14 22:40:06 +08:00
mssonicbld
ec73d0f3ff
[chassis]: removed dependency for bgp and swss for chassis supervisor (#15734) (#16135)
Fixes #15667 and #13293

Work item tracking
Microsoft ADO 24472854:

How I did it
On chassis supervisor bgp feature is disabled in hostcfgd. The dependency between swss and bgp causes the bgp containers to start even though the feature is disabled.

How to verify it
Tests on chassis supervisor and LC

Co-authored-by: Arvindsrinivasan Lakshmi Narasimhan <55814491+arlakshm@users.noreply.github.com>
2023-08-14 22:39:24 +08:00
SuvarnaMeenakshi
ebe8c8c223 [SNMP][IPv6]: Fix to use link local IPv6 address as snmp agentAddress (#16013)
<!--
     Please make sure you've read and understood our contributing guidelines:
     https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md

     ** Make sure all your commits include a signature generated with `git commit -s` **

     If this is a bug fix, make sure your description includes "fixes #xxxx", or
     "closes #xxxx" or "resolves #xxxx"

     Please provide the following information:
-->

#### Why I did it
fixes: https://github.com/sonic-net/sonic-buildimage/issues/16001
Caused by: https://github.com/sonic-net/sonic-buildimage/pull/15487

The above PR introduced change to use Management and Loopback Ipv4 and ipv6 addresses as snmpagent address in snmpd.conf file.
With this change, if Link local IP address is configured as management or Loopback IPv6 address, then snmpd tries to open socket on that ipv6 address and fails with the below error:
```
Error opening specified endpoint "udp6:[fe80::5054:ff:fe6f:16f0]:161"
Server Exiting with code 1
```
From RFC4007, if we need to specify non-global ipv6 address without ambiguity, we need to use zone id along with the ipv6 address: <address>%<zone_id>
Reference: https://datatracker.ietf.org/doc/html/rfc4007

##### Work item tracking
- Microsoft ADO **(number only)**:

#### How I did it
Modify snmpd.conf file to use the %zone_id representation for ipv6 address.
#### How to verify it
In VS testbed, modify config_db to use link local ipv6 address as management address:
    "MGMT_INTERFACE": {
        "eth0|10.250.0.101/24": {
            "forced_mgmt_routes": [
                "172.17.0.1/24"
            ],
            "gwaddr": "10.250.0.1"
        },
        "eth0|fe80::5054:ff:fe6f:16f0/64": {
            "gwaddr": "fe80::1"
        }
    },

Execute config_reload after the above change.
snmpd comes up and check if snmpd is listening on ipv4 and ipv6 addresses:
```
admin@vlab-01:~$ sudo netstat -tulnp | grep 161
tcp        0      0 127.0.0.1:3161          0.0.0.0:*               LISTEN      274060/snmpd        
udp        0      0 10.1.0.32:161           0.0.0.0:*                           274060/snmpd        
udp        0      0 10.250.0.101:161        0.0.0.0:*                           274060/snmpd        
udp6       0      0 fc00:1::32:161          :::*                                274060/snmpd        
udp6       0      0 fe80::5054:ff:fe6f::161 :::*                                274060/snmpd      -- Link local 
 
admin@vlab-01:~$ sudo ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.250.0.101  netmask 255.255.255.0  broadcast 10.250.0.255
        inet6 fe80::5054:ff:fe6f:16f0  prefixlen 64  scopeid 0x20<link>
        ether 52:54:00:6f:16:f0  txqueuelen 1000  (Ethernet)
        RX packets 36384  bytes 22878123 (21.8 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 261265  bytes 46585948 (44.4 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

admin@vlab-01:~$ docker exec -it snmp snmpget -v2c -c public fe80::5054:ff:fe6f:16f0 1.3.6.1.2.1.1.1.0
iso.3.6.1.2.1.1.1.0 = STRING: "SONiC Software Version: SONiC.master.327516-04a6031b2 - HwSku: Force10-S6000 - Distribution: Debian 11.7 - Kernel: 5.10.0-18-2-amd64"
```
Logs from snmpd:
```
Turning on AgentX master support.
NET-SNMP version 5.9
Connection from UDP/IPv6: [fe80::5054:ff:fe6f:16f0%eth0]:44308
```
Ran test_snmp_loopback test to check if loopback ipv4 and ipv6 works:
```
./run_tests.sh -n vms-kvm-t0 -d vlab-01 -c snmp/test_snmp_loopback.py  -f vtestbed.yaml -i ../ansible/veos_vtb -e "--skip_sanity --disable_loganalyzer" -u
=== Running tests in groups ===
Running: pytest snmp/test_snmp_loopback.py --inventory ../ansible/veos_vtb --host-pattern vlab-01 --testbed vms-kvm-t0 --testbed_file vtestbed.yaml --log-cli-level warning --log-file-level debug --kube_master unset --showlocals --assert plain --show-capture no -rav --allow_recover --ignore=ptftests --ignore=acstests --ignore=saitests --ignore=scripts --ignore=k8s --ignore=sai_qualify --junit-xml=logs/tr.xml --log-file=logs/test.log --skip_sanity --disable_loganalyzer
..                                                                        

snmp/test_snmp_loopback.py::test_snmp_loopback[vlab-01] PASSED 
```
<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->

#### Which release branch to backport (provide reason below if selected)

<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
- [x] 202205
- [x] 202211
- [x] 202305

#### Tested branch (Please provide the tested image version)

<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->

- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->

#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->

<!--
 Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->

#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->

#### A picture of a cute animal (not mandatory but encouraged)
2023-08-14 18:32:35 +08:00
mssonicbld
fb4f2382d1
[submodule] Update submodule sonic-platform-common to the latest HEAD automatically (#16061)
#### Why I did it
src/sonic-platform-common
```
* 5af6f9f - (HEAD -> 202305, origin/202305) Comment out tx power validation check and program the passed value  (#389) (3 days ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-09 20:51:34 +08:00
mssonicbld
ca8efbf0d3
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#16063)
#### Why I did it
src/sonic-swss
```
* 27b64579 - (HEAD -> 202305, origin/202305) Remove system neighbor DEL operation in m_toSync if SET operation for (#2853) (3 days ago) [Song Yuan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-09 18:35:26 +08:00
mssonicbld
b226ae0699
[submodule] Update submodule sonic-swss-common to the latest HEAD automatically (#16064)
#### Why I did it
src/sonic-swss-common
```
* 449ac55 - (HEAD -> 202305, origin/202305) [Ci] Fix collect log error in azp template (#799) (2 days ago) [xumia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-08 20:47:47 +08:00
Longxiang Lyu
6e49fa5fd2 [monit][dualtor] Periodically check mux neighbors consistency (#15769)
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
2023-08-08 18:33:29 +08:00
mssonicbld
63e51b4b2a
[submodule] Update submodule sonic-linux-kernel to the latest HEAD automatically (#16059)
#### Why I did it
src/sonic-linux-kernel
```
* bf1ee0e - (HEAD -> 202305, origin/202305) Fix Makefile syntax and provide default value for CONFIGURED_PLATFORM (#324) (13 hours ago) [Saikrishna Arcot]
* 7d7abaf - Update codeowner and build info (#319) (13 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-08 02:32:45 +08:00
mssonicbld
4ca01a7715
[syncd.sh] Clear semaphore before updating firmware (#15818) (#16067) 2023-08-07 18:20:15 +08:00
xumia
30f935c994 [Build] Fix some of the patches not applied issue (#15660)
Why I did it
Fix some of the patches in .patches folder not applied issue.
The command "quilt applied" only lists the applied patches, if some of the patches have issues, then the patches will not be applied when you run the build command again.

Work item tracking
Microsoft ADO (number only): 24410730
How I did it
Run the command to apply the patches without any conditions.
If failed, check if the failure reason is "series fully applied".
How to verify it
2023-08-07 16:33:01 +08:00
mssonicbld
41cdd361d6
[submodule] Update submodule sonic-platform-daemons to the latest HEAD automatically (#16062)
#### Why I did it
src/sonic-platform-daemons
```
* 6c47906 - (HEAD -> 202305, origin/202305) Update active application selected code in transceiver_info table aft… (#381) (13 hours ago) [Michael Wang - TW]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-08-07 16:32:54 +08:00
mssonicbld
e6e461ccf2
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#16065) 2023-08-07 16:30:02 +08:00
vmittal-msft
5ee18ece65 Update WRED profile on system ports (#15612)
* Update WRED profile on system ports
2023-08-07 14:33:42 +08:00
Stephen Sun
33d14521f2 [Mellanox] Use Debian reboot in Nvidia platform reboot when it is invoked from kdump capture boot (#15701)
#### Why I did it

When a kernel crash occurs, the system will reboot to the kdump capture kernel if kdump is enabled (`config kdump enable`). In the kdump capture boot, it only stores the crash information, and then reboot the system to a normal boot.
In this boot, no SONiC service is started but it invokes `reboot` which is actually the SONiC reboot that depends on SONiC services. There is a logic to skip all SONiC stuff and invoke platform reboot in SONiC reboot to avoid issues.
However, on Nvidia platforms, the platform reboot still depends on SONiC services, which can cause issues.
So, the Debian reboot is called directly in platform reboot if it is invoked from the kdump capture boot.

#### How I did it

Manual test
2023-08-07 14:33:34 +08:00
mssonicbld
33a10b479a
[nvidia] make sure shared storage with syncd is cleared on restarts (#14547) (#16046)
Why I did it
Sharing the storage of syncd with other proprietary application extensions allows them to communicate with syncd in differnt ways.
If one container wants to pass some information to syncd then shared storage can be used. However, today the shared storage isn't cleaned on restarts making it possible for syncd to read out-of-date information generated in the past.

NOTE: No plans to use it for standard SONIC dockers and we are working on removing the SDK dependency from PMON docker

How I did it
Implemented new service to clean the shared storage.

How to verify it
Do reboot/fast-reboot/warm-reboot/config-reload/systemctl restart swss and verify /tmp/ is cleaned after each restart in syncd container.

Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Co-authored-by: Stepan Blyshchak <38952541+stepanblyschak@users.noreply.github.com>
2023-08-07 09:27:43 +08:00
mssonicbld
471a3a8067
Add support data for fabric monitoring in CONFIG_DB. (#14170) (#16045)
Added support data for fabric monitoring in CONFIG_DB

The CONFIG_DB now has the FABRIC_MONITOR|FABRIC_MONITOR_DATA table for default value for fabric port monitoring. An example output of getting this table is:

sonic-db-cli CONFIG_DB hgetall "FABRIC_MONITOR|FABRIC_MONITOR_DATA"
{'monErrThreshCrcCells': '1', 'monErrThreshRxCells': '61035156', 'monPollThreshIsolation': '1', 'monPollThreshRecovery': '8'}

The CONFIG_DB now also has a table for each fabric port for its isolate status.
An example output of getting this table is:

sonic-db-cli CONFIG_DB hgetall "FABRIC_PORT|Fabric20"
{'alias': 'Fabric20', 'isolateStatus': 'False', 'lanes': '20'}

Co-authored-by: jfeng-arista <98421150+jfeng-arista@users.noreply.github.com>
2023-08-07 09:26:45 +08:00
mssonicbld
03fc34e56c
[YANG][vlan-sub-interface] Add vlan field (#15838) (#16057) 2023-08-07 03:48:34 +08:00
mssonicbld
1c3e5947ce
[YANG] add yang model for MUX_LINKMGR|MUXLOGGER (#15884) (#16058) 2023-08-07 03:46:18 +08:00
mssonicbld
b812e562c8
[minigraph] remove number of lanes check for changing speed from 400G to 100G and set speed setting before lane reconfiguration (#15721) (#16054) 2023-08-07 03:24:30 +08:00
mssonicbld
14ba74ede9
[E1031] fix pca9548 initializes failed occasionally (#15712) (#16052) 2023-08-07 03:01:06 +08:00
Junchao-Mellanox
bf37c3162c Fix issue: set delayed attribute to true for platform monitor service (#15816)
There is a redundant line in init_cfg.json.j2. It would cause pmon service always has "delayed=False". However, we know that PMON has a timer now. So, I try to fix it here.
2023-08-07 00:34:12 +08:00
Samuel Angebault
82108429c6
[202305][Arista] Update platform submodules (#16010)
Why I did it
fix pcied leak on chassis
fix fan status led setting on fixed systems
misc fixes
Work item tracking
Microsoft ADO (number only):
How I did it
Updated arista platform library submodules

Description for the changelog
Update Arista platform submodules
2023-08-06 21:31:17 +08:00
mssonicbld
157b9ea3b7
[Mellanox] Remove unnecessary file manipulation in the SAI Make file (#15993) (#16043) 2023-08-06 17:18:21 +08:00
mssonicbld
89fdba9e92
[Mellanox] Remove reset_from_comex from reboot cause mapping (#15793) (#16040) 2023-08-06 17:04:26 +08:00
lerry-lee
3dfe75df7d
[CI/CD] Use remote PR test template from sonic-mgmt master to run PR test (#15980)
Why I did it
Use remote PR test template from sonic-mgmt master to run PR test.

How I did it
Modify PR test azure pipeline yml file.

How to verify it
PR test executing normally.

Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
2023-08-01 16:20:52 +08:00
mssonicbld
c564f37ec4
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#15981) 2023-07-27 19:18:36 +08:00
mssonicbld
9da145cdc4
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#15951) 2023-07-25 09:59:02 +08:00
mssonicbld
33d4981c52
[submodule] Update submodule sonic-utilities to the latest HEAD automatically (#15778) 2023-07-24 22:40:34 +08:00
mssonicbld
298e7ebe34
[Mellanox] Add support for BIOS update on Spectrum-4 (#15795) (#15942) 2023-07-24 02:08:20 +08:00
mssonicbld
379d45ce3e
[submodule] Update submodule sonic-platform-common to the latest HEAD automatically (#15917)
#### Why I did it
src/sonic-platform-common
```
* 411d5b2 - (HEAD -> 202305, origin/202305) More prevention of fatal exception caused by VDM dictionary missing fields when a transceiver has just been pulled (#376) (2 days ago) [snider-nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-07-21 16:32:51 +08:00
Ying Xie
8369e1c6b7 Potential fix for Celestica E1031 device hang (#15822)
set CPU max_cstate to 0

Co-authored-by: Sumukha Tumkur Vani <sumukhatv@outlook.com>
2023-07-21 14:33:59 +08:00
mssonicbld
3bfe92e10e
[submodule] Update submodule sonic-swss to the latest HEAD automatically (#15919)
#### Why I did it
src/sonic-swss
```
* fa342305 - (HEAD -> 202305, origin/202305) Remove redundant updateFabricPortState (#2850) (18 hours ago) [kenneth-arista]
* c571d8bf - Allow NOT_IMPLEMENTED sai return status for availability monitoring API (#2848) (18 hours ago) [Tejaswini Chadaga]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-07-20 18:33:59 +08:00
mssonicbld
aab66f8cd7
[submodule] Update submodule sonic-py-swsssdk to the latest HEAD automatically (#15777)
src/sonic-py-swsssdk

* 1109e49 - (HEAD -> 202305, origin/master, origin/HEAD, origin/202305, master) add semgrep (#141) (4 weeks ago) [Mai Bui]
How I did it
How to verify it
2023-07-19 21:18:16 +08:00
mssonicbld
54eec890ba
Revert "[gearbox] use credo sai v0.9.0 (#14149)" (#15708) (#15879) 2023-07-19 20:25:29 +08:00
mssonicbld
18b446bfe0
[ctgmgr]: do not remove label when do systemd service stop when service is in kube mode (#15642) (#15878) 2023-07-19 20:10:41 +08:00
mssonicbld
ff5c03f91b
[Nokia][sonic-platform] Update Nokia sonic-platform submodule (#15239) (#15873) 2023-07-19 20:07:15 +08:00
mssonicbld
6004054711
[arp_update]: Fix IPv6 neighbor race condition (#15583) (#15877) 2023-07-19 20:06:12 +08:00
mssonicbld
7bd67d4f37
Upgrade scapy in the PTF's python3 virtualenv to 2.5.0 (#15573) (#15875) 2023-07-19 20:05:40 +08:00
mssonicbld
83aa8b8180
[SNMP][IPv6]: Fix SNMP IPv6 reachability issue in certain scenarios (#15487) (#15874) 2023-07-19 20:04:57 +08:00
mssonicbld
f4a7e22e4e
[k8s]: Bypass the systemd service restart limit and do immediately restart when change to local mode (#15432) (#15868) 2023-07-19 20:04:23 +08:00
mssonicbld
38e721bc24
[ctrmgr]: Container image clean up bug fix (#15772) (#15870) 2023-07-19 20:02:45 +08:00
mssonicbld
74598e568a
Add health check probe for k8s upgrade containers. (#15223) (#15867)
#### Why I did it
After k8s upgrade a container, k8s can only know the container is running, don't know the service's status inside container. So we need a probe inside container, k8s will call the probe to check whether the container is really ready.
##### Work item tracking
- Microsoft ADO **(number only)**: 22453004
#### How I did it
Add a health check probe inside config engine container, the probe will check whether the start service exit normally or not if the start service exists and call the python script to do container self-related specific checks if the script is there. The python script should be implemented by feature owner if it's needed.

more details: [design doc](https://github.com/sonic-net/SONiC/blob/master/doc/kubernetes/health-check.md)
#### How to verify it
Check path /usr/bin/readiness_probe.sh inside container.

#### Which release branch to backport (provide reason below if selected)

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [x] 202205
- [x] 202211

#### Tested branch (Please provide the tested image version)
- [x] 20220531.28

Co-authored-by: lixiaoyuner <35456895+lixiaoyuner@users.noreply.github.com>
2023-07-19 16:11:13 +08:00
mssonicbld
0eb0749442
Move /var/log to RAM for Mellanox SN2700, Nokia 7215 and Dell S6100 (#15077) (#15871)
Why I did it
Move the /var/log on RAM. This is to prevent too many disk write on /var/log when mounted on disk.

Work item tracking
Microsoft ADO (number only): 17955517

How I did it
Pass kernel cmdline option "log_inram=on"

How to verify it
Mellanox SN2700
root@str-msn2700-02:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 791M 15M 776M 2% /run
root-overlay 15G 12G 2.9G 80% /
/dev/sda3 15G 12G 2.9G 80% /host
tmpfs 790M 12M 779M 2% /var/log
tmpfs 3.9G 107M 3.8G 3% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 4.0M 0 4.0M 0% /sys/fs/cgroup
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/f50948841bee041368bf7c0546ceab4c71f05951fb0ed5ae70411f28dde68907/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/c45de6c53e7185631a37e87686dd296b2585425f638aa92c720c90eae038480c/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/f5bc87d5c2965b21b222f09dd57fe0fc798e518101d7ecd25d170b7662ae3e80/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/b2f435a256b930da4897d8a096095dcce183a6efa55b5b637187a654db0585ee/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/5c3588e42b29fd0516a164c00de621b7a00236ecbb240c4d0b3903ec706c220d/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/5a4a2a2602fb4ed1d1df90c3916076f595b4d8bc18eb465dd23e33f354adcfb8/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/9926f7378de9223fd3e88c8f59d888ad178e2ca23fa978f372e9838f10b7b803/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/130abaf95cffc06d952adacb6aa54a2f5e7c54c81fa8c15184389e25a7884328/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/aeef95cf5af6e20909a4cfd6c696176cc5dcb31dd456cc8acbbd3d59d47333d7/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/ef9bb94012b9fe987e55c9b73141296da8081d258d0d134922776c3c4b3ec551/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/cf425d372b347fd68569f128e1771e5a70dbf504b2f013304d60bcef6dfbd0da/merged
overlay 15G 12G 2.9G 80% /var/lib/docker/overlay2/7a2592cdac5c7369a6a98e07dbf1c2d96d29634e7d7b593617c50cc7e09e5cb3/merged
root@str-msn2700-02:~# 
root@str-msn2700-02:~# free -h
 total used free shared buff/cache available
Mem: 7.7Gi 3.0Gi 3.3Gi 133Mi 1.5Gi 4.4Gi
Swap: 0B 0B 0B
root@str-msn2700-02:~# 


Dell S6100

root@str-s6100-acs-5:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 794M 15M 780M 2% /run
root-overlay 14G 9.9G 3.6G 74% /
/dev/sda4 14G 9.9G 3.6G 74% /host
tmpfs 793M 13M 781M 2% /var/log
tmpfs 3.9G 60K 3.9G 1% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 4.0M 0 4.0M 0% /sys/fs/cgroup
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/f94441208fba5df49b0b8f0b49c699475ed0fd07673ab4a3eb574869b8e17c83/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/1c3dc3b582599602aec0dbd78945560f330f6244d2e218750622b3814dc53ed3/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/ab5b96e72e323fff5168abc69f8599fa244410d856dbd10cdbf73c99a4fe8d67/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/0e6e3adaba6bb1d2684da444661e540030d588ef498466b7d8ff773ce263a2ea/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/1218ed8bfa7a17c8927b20005d45f5e1e4a634e653d5c5c2057ac54713dc3387/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/b31486f665e5c929966185397990553fee6b41b515cbef28c945096673ac9bef/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/b984fa70f30bd1bac92bdf8d36542ed4433b4dabc33f7bb1f0a17a5eaee90f3e/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/b7866a1462768f3564b832187837c7a5e3d493b8084204e59610960cc5f6bc19/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/113bbbe88ee8452f4310b02a1343cfb4f1beb5fedf68a7d810ff5b5d7457c9f0/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/e7cc383186c6f9acecf2031c0c1f0870b8a7f63e1918b8359afa7a13d3c28963/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/c5d269100da205981c51e70e9e86facf69487f99e234dcdac822b8ab01af3d6a/merged
overlay 14G 9.9G 3.6G 74% /var/lib/docker/overlay2/463874ab78b2e45a34cf4d3d1cd2e45ff18c0abbf37be62d2c8559dce38d6219/merged
root@str-s6100-acs-5:~# free -h
 total used free shared buff/cache available
Mem: 7.8Gi 2.1Gi 4.1Gi 69Mi 1.6Gi 5.3Gi
Swap: 0B 0B 0B
root@str-s6100-acs-5:~# 

Nokia-7215

root@str-2-7215-acs-4:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 1.5G 0 1.5G 0% /dev
tmpfs 303M 14M 289M 5% /run
root-overlay 15G 7.2G 7.2G 51% /
/dev/sda2 15G 7.2G 7.2G 51% /host
tmpfs 302M 7.5M 295M 3% /var/log
tmpfs 1.5G 60K 1.5G 1% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 4.0M 0 4.0M 0% /sys/fs/cgroup
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/617e49b8b8e4368db2b3b2fb3e3204e80ec572fe7981d67ad2116d9c3e4472f3/merged
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/c94b855482fc14aa1f032b0c8dc035b02f37ad9e4341cb5a8d22f14e14c63824/merged
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/2d8c6ee95b212bbc8376d15916723128455678f2a3c88f382b451bec88297341/merged
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/92114013a19dc19f30505ba645f961d50e093365422a9b22116ced1fa88ded2b/merged
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/c8e79a8403863887666324f163a4b6633c40c8b349402b3a0f40ba7e51adb28b/merged
overlay 15G 7.2G 7.2G 51% /var/lib/docker/overlay2/27fd4a51859f3febd345a8551a0b4686d696c205048e1d595b76114385a68949/merged
root@str-2-7215-acs-4:~#
2023-07-19 16:09:37 +08:00
mssonicbld
43585c3326
Add support for secure upgrade (#11862) (#15691)
- What I did
Added support for secure upgrade.

- How I did it
During sonic_installer install, added secure upgrade image verification.
HLD can be found in the following PR: sonic-net/SONiC#1024

- Why I did it
Feature is used to allow image was not modified since built from vendor. During installation, image can be verified with a signature attached to it.

- How I did it
Feature includes image signing during build (in sonic buildimage repo) and verification during image install (in sonic-utilities).

- How to verify it
In order for image verification - image must be signed - need to provide signing key and certificate (paths in SECURE_UPGRADE_DEV_SIGNING_KEY and SECURE_UPGRADE_DEV_SIGNING_CERT in rules/config) during build , and during image install, need to enable secure boot flag in bios, and signing_certificate should be available in bios.

- Feature dependencies
In order for this feature to work smoothly, need to have secure boot feature implemented as well.
The Secure boot feature will be merged in the near future.

Co-authored-by: ycoheNvidia <99744138+ycoheNvidia@users.noreply.github.com>
2023-07-19 16:08:14 +08:00
Masaru OKI
8c94e32fe5 Pick dependency files in submodules. (#15142)
#### Why I did it

Failed to build sonic-dhcp6relay_1.0.0-0_amd64.deb

#### How I did it

src/dhcprelay has git submodule.
Dependency files by "git ls-files" are not picked files in submodules.
Add --recurse-submodules, work again.

#### How to verify it

make all
2023-07-19 14:34:12 +08:00
xumia
de2a650a8e
[Build] Fix the PyYang python package installation issue (#15892)
Why I did it
Fix the armhf build failure.
How to reproduce the issue:

docker run -it debain:bullseye bash
apt-get update && apt-get install -y python3-pip
pip3 install PyYAML==5.4.1
Error message:

Collecting PyYAML==5.4.1
  Downloading PyYAML-5.4.1.tar.gz (175 kB)
     |████████████████████████████████| 175 kB 12.3 MB/s 
  Installing build dependencies ... done
  Getting requirements to build wheel ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl
....
      raise AttributeError(attr)
  AttributeError: cython_sources
  ----------------------------------------
WARNING: Discarding d63f2d7597/PyYAML-5.4.1.tar.gz (sha256)=607774cbba28732bfa802b54baa7484215f530991055bb562efbed5b2f20a45e (from https://pypi.org/simple/pyyaml/) (requires-python:>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*, !=3.5.*). Command errored out with exit status 1: /usr/bin/python3 /tmp/tmp6xabslgb_in_process.py get_requires_for_build_wheel /tmp/tmp_er01ztl Check the logs for full command output.
ERROR: Could not find a version that satisfies the requirement PyYAML==5.4.1
ERROR: No matching distribution found for PyYAML==5.4.1
root@fa2fa92edcfd:/# 
But if adding the option --no-build-isolation, then it is good, see fix.

install "PyYAML==5.4.1" --no-build-isolation
The same error can be found in the multiple builds.

Work item tracking
Microsoft ADO (number only): 24567457
How I did it
Add a build option --no-build-isolation.

Disable isolation when building a modern source distribution. Build dependencies specified by PEP 518 must be already installed if this option is used.
How to verify it
2023-07-19 09:26:49 +08:00
mssonicbld
4173a6dd47
[submodule] Update submodule sonic-dbsyncd to the latest HEAD automatically (#15775) 2023-07-17 23:29:58 +08:00
lixiaoyuner
c59f55f6a3
Move k8s script to docker-config-engine (#14788) (#15768)
Why I did it
To reduce the container's dependency from host system

Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.

How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.

Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
2023-07-17 23:21:01 +08:00
mssonicbld
0b1f834e22
update rsyslog log size conf (#15821) (#15837) 2023-07-14 20:34:22 +08:00
xumia
826f5a1d45 [Build] Fix the python module importlib.metadata not found issue (#15800)
Why I did it
It is to fix the docker-ptf-sai build failure.
https://dev.azure.com/mssonic/build/_build/results?buildId=311315&view=logs&j=cef3d8a9-152e-5193-620b-567dc18af272&t=cf595088-5c84-5cf1-9d7e-03331f31d795

2023-07-09T13:53:19.9025355Z �[91mTraceback (most recent call last):
2023-07-09T13:53:19.9025715Z   File "/root/ptf/.eggs/setuptools_scm-7.1.0-py3.7.egg/setuptools_scm/_entrypoints.py", line 74, in <module>
2023-07-09T13:53:19.9025933Z     from importlib.metadata import entry_points  # type: ignore
2023-07-09T13:53:19.9026167Z ModuleNotFoundError: No module named 'importlib.metadata'
Work item tracking
Microsoft ADO (number only): 24513583
How I did it
How to verify it
2023-07-13 20:57:24 +08:00
Stepan Blyshchak
8c83dc8c4d [FRR]Fixing the advertisement of static ipv6 route (#15688)
Co-authored-by: dgsudharsan <sudharsand@nvidia.com>
Co-authored-by: Liat Grozovik <44433539+liat-grozovik@users.noreply.github.com>
2023-07-13 04:32:58 +08:00
mssonicbld
7ef866b140
[submodule] Update submodule sonic-gnmi to the latest HEAD automatically (#15776)
#### Why I did it
src/sonic-gnmi
```
* d1467d3 - (HEAD -> 202305, origin/202305) Update makefile to support armhf (#132) (#133) (5 days ago) [ganglv]
* 88ee65d - [202305] Checkout correct branch from sonic-mgmt-common and sonic-swss-common during pipeline build (#128) (5 days ago) [Sachin Holla]
* 87d8eb3 - TranslClient: use PathValidator to sanitize the request paths (#112) (4 weeks ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
2023-07-12 16:37:30 +08:00
Chun'ang Li
fca2a8d77a
Refine PR test template format (#15639)
Why I did it
Refine PR test template format.

How I did it
Refine PR test template format.

How to verify it
PR test executed normally.

Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
2023-07-10 10:48:54 +08:00
mssonicbld
bb3eff6ab4
Revert "Fix for fast/cold-boot: call db_migrator only after old config is loaded (#14933)" (#15464) (#15618) 2023-06-29 22:35:47 +08:00
mssonicbld
d0126e679b
Fix for issue#14964 (#15212) (#15595) 2023-06-29 21:51:19 +08:00
mssonicbld
2fc98cd8fc
[chassis][lldp] Fix the lldp error log in host instance which doesn't contain front panel ports (#14814) (#15603) 2023-06-29 21:46:32 +08:00
xumia
8904545b16 Upgrade sonic-fips packages (#15400)
Why I did it
Downgrade the symcrypt version, use the SymCrypt version v103.0.1 for certification.

Work item tracking
Microsoft ADO (number only): 24222567
How I did it
How to verify it
2023-06-29 20:55:05 +08:00
Ye Jianquan
e747e2a574
[CI/CD] Refine t0 sonic and remove SPECIFIED_PARAMS (#15628)
Why I did it
t0-sonic's specific params has been set on sonic-mgmt repo, remove useless SPECIFIED_PARAMS usage
2023-06-27 11:02:06 +08:00
vdahiya12
acc5dfb603 [Arista][x86_64-arista_7050_qx32] Add Components to platform.json (#15252)
* [Arista][x86_64-arista_7050_qx32] Add Components to platform.json

Signed-off-by: vaibhav dahiya <vdahiya@microsoft.com>

* fix comment

Signed-off-by: vaibhav dahiya <vdahiya@microsoft.com>

* fix comment

Signed-off-by: vaibhav dahiya <vdahiya@microsoft.com>

* reformat

Signed-off-by: vaibhav dahiya <vdahiya@microsoft.com>

---------

Signed-off-by: vaibhav dahiya <vdahiya@microsoft.com>
2023-06-26 16:41:07 +08:00
Zhijian Li
90dc056824 Update the defination of acl table type BMCDATA and BMCDATAV6 (#15385)
Why I did it
Update the definition of acl table type BMCDATA and BMCDATAV6 in minigraph parser.

Work item tracking
Microsoft ADO (number only): 24101023
How I did it
Update the definition of acl table type BMCDATA and BMCDATAV6 in minigraph parser.

How to verify it
Ran unittest to verify this update:
2023-06-26 16:41:02 +08:00
Longxiang Lyu
664675cad5 [mux] Integrate linkmgrd with swss logger (#15392)
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
2023-06-26 16:40:58 +08:00
mssonicbld
260173782a
Fix a check for yang validation (#15498) (#15600) 2023-06-26 16:15:11 +08:00
mssonicbld
c5167457eb
enable info log for graceful restart events (#15535) (#15601) 2023-06-26 02:56:44 +08:00
mssonicbld
b029f49013
[yang] add Yang model for MUX_LINKMGR|LINK_PROBER (#15384) (#15619) 2023-06-25 01:38:57 +08:00
Malte Janduda
2b8b19f00e
[buildsystem] Fix hiredis package version: 0.14.1-1 (#15461) (#15569)
- Why I did it
To fix hiredis compilation

- How I did it
Changed package version: 0.14.0-3~bpo9+1 -> 0.14.1-1

- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin

Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Co-authored-by: Nazarii Hnydyn <nazariig@nvidia.com>
2023-06-22 18:18:27 -07:00
StormLiangMS
65c15aa1f9 [202305]add branch info for gitmodules (#15213)
Why I did it
To add branch info for submodules of 202305 branch

Work item tracking
Microsoft ADO (21450860):
How I did it
To modify the .gitmodule file to have 202305 branch for repos

How to verify it
Pass PR build
2023-06-16 11:45:38 +00:00
703 changed files with 150754 additions and 9362 deletions

View File

@ -161,8 +161,8 @@ stages:
git branch -u remote/$BRANCH_NAME
echo $GIT_PASSWORD | gh auth login --with-token
TITLE="Upgrade SONiC Versions"
BODY="Upgrade SONiC Versions"
TITLE="[${SOURCE_BRANCH#refs/heads/}] Upgrade SONiC package Versions"
BODY=$TITLE
RET=0
if ! gh pr create -t "$TITLE" -b "$BODY" -B $(Build.SourceBranch) -R $(Build.Repository.Name) > pr.log 2>&1; then
if ! grep -q "already exists" pr.log; then

View File

@ -18,6 +18,10 @@ parameters:
type: string
default: 1
- name: NUM_ASIC
type: number
default: 1
- name: TEST_SET
type: string
default: ""
@ -34,17 +38,73 @@ parameters:
type: string
default: "ceos"
- name: SPECIFIED_PARAMS
- name: TESTBED_NAME
type: string
default: "{}"
default: ""
- name: IMAGE_URL
type: string
default: ""
- name: HWSKU
type: string
default: ""
- name: TEST_PLAN_TYPE
type: string
default: ""
- name: PLATFORM
type: string
default: ""
- name: SCRIPTS
type: string
default: ""
- name: FEATURES
type: string
default: ""
- name: SCRIPTS_EXCLUDE
type: string
default: ""
- name: FEATURES_EXCLUDE
type: string
default: ""
- name: REPO_NAME
type: string
default: ""
- name: MGMT_BRANCH
type: string
default: master
default: ""
- name: NUM_ASIC
- name: STOP_ON_FAILURE
type: string
default: ""
- name: RETRY_TIMES
type: string
default: ""
- name: DUMP_KVM_IF_FAIL
type: string
default: "True"
values:
- "True"
- "False"
- name: REQUESTER
type: string
default: ""
- name: MAX_RUN_TEST_MINUTES
type: number
default: 1
default: 480
steps:
- script: |
@ -57,12 +117,20 @@ steps:
set -e
pip install PyYAML
rm -f new_test_plan_id.txt
python ./.azure-pipelines/test_plan.py create -t ${{ parameters.TOPOLOGY }} -o new_test_plan_id.txt \
--min-worker ${{ parameters.MIN_WORKER }} --max-worker ${{ parameters.MAX_WORKER }} \
--test-set ${{ parameters.TEST_SET }} --kvm-build-id $(KVM_BUILD_ID) \
--deploy-mg-extra-params "${{ parameters.DEPLOY_MG_EXTRA_PARAMS }}" --common-extra-params "${{ parameters.COMMON_EXTRA_PARAMS }}" \
--mgmt-branch ${{ parameters.MGMT_BRANCH }} --vm-type ${{ parameters.VM_TYPE }} --specified-params "${{ parameters.SPECIFIED_PARAMS }}" \
python ./.azure-pipelines/test_plan.py create \
-t ${{ parameters.TOPOLOGY }} \
-o new_test_plan_id.txt \
--min-worker ${{ parameters.MIN_WORKER }} \
--max-worker ${{ parameters.MAX_WORKER }} \
--test-set ${{ parameters.TEST_SET }} \
--kvm-build-id $(KVM_BUILD_ID) \
--deploy-mg-extra-params "${{ parameters.DEPLOY_MG_EXTRA_PARAMS }}" \
--common-extra-params "${{ parameters.COMMON_EXTRA_PARAMS }}" \
--mgmt-branch ${{ parameters.MGMT_BRANCH }} \
--vm-type ${{ parameters.VM_TYPE }} \
--num-asic ${{ parameters.NUM_ASIC }}
TEST_PLAN_ID=`cat new_test_plan_id.txt`
echo "Created test plan $TEST_PLAN_ID"
@ -108,18 +176,20 @@ steps:
env:
TESTBED_TOOLS_URL: $(TESTBED_TOOLS_URL)
displayName: Run test
timeoutInMinutes: ${{ parameters.MAX_RUN_TEST_MINUTES }}
- script: |
set -e
echo "KVM dump"
echo "SONiC PR system-level test is powered by SONiC Elastictest, for any issue, please send email to sonicelastictest@microsoft.com"
echo "Runtime detailed progress at $(FRONTEND_URL)/scheduler/testplan/$TEST_PLAN_ID "
# When "KVMDUMP" finish, it changes into "FAILED", "CANCELLED" or "FINISHED"
python ./.azure-pipelines/test_plan.py poll -i "$(TEST_PLAN_ID)" --expected-state KVMDUMP
condition: succeededOrFailed()
env:
TESTBED_TOOLS_URL: $(TESTBED_TOOLS_URL)
displayName: KVM dump
- ${{ if eq(parameters.DUMP_KVM_IF_FAIL, 'True') }}:
- script: |
set -e
echo "KVM dump"
echo "SONiC PR system-level test is powered by SONiC Elastictest, for any issue, please send email to sonicelastictest@microsoft.com"
echo "Runtime detailed progress at $(FRONTEND_URL)/scheduler/testplan/$TEST_PLAN_ID "
# When "KVMDUMP" finish, it changes into "FAILED", "CANCELLED" or "FINISHED"
python ./.azure-pipelines/test_plan.py poll -i "$(TEST_PLAN_ID)" --expected-state KVMDUMP
condition: succeededOrFailed()
env:
TESTBED_TOOLS_URL: $(TESTBED_TOOLS_URL)
displayName: KVM dump
- script: |
set -e

15
.gitmodules vendored
View File

@ -1,15 +1,19 @@
[submodule "sonic-swss-common"]
path = src/sonic-swss-common
url = https://github.com/sonic-net/sonic-swss-common
branch = 202305
[submodule "sonic-linux-kernel"]
path = src/sonic-linux-kernel
url = https://github.com/sonic-net/sonic-linux-kernel
branch = 202305
[submodule "sonic-sairedis"]
path = src/sonic-sairedis
url = https://github.com/sonic-net/sonic-sairedis
branch = 202305
[submodule "sonic-swss"]
path = src/sonic-swss
url = https://github.com/sonic-net/sonic-swss
branch = 202305
[submodule "src/p4c-bm/p4c-bm"]
path = platform/p4/p4c-bm/p4c-bm
url = https://github.com/krambn/p4c-bm
@ -31,22 +35,25 @@
[submodule "src/sonic-utilities"]
path = src/sonic-utilities
url = https://github.com/sonic-net/sonic-utilities
branch = 202305
[submodule "platform/broadcom/sonic-platform-modules-arista"]
path = platform/broadcom/sonic-platform-modules-arista
url = https://github.com/aristanetworks/sonic
[submodule "src/sonic-platform-common"]
path = src/sonic-platform-common
url = https://github.com/sonic-net/sonic-platform-common
branch = 202305
[submodule "src/sonic-platform-daemons"]
path = src/sonic-platform-daemons
url = https://github.com/sonic-net/sonic-platform-daemons
branch = 202305
[submodule "src/sonic-platform-pde"]
path = src/sonic-platform-pde
url = https://github.com/sonic-net/sonic-platform-pdk-pde
[submodule "src/sonic-frr/frr"]
path = src/sonic-frr/frr
url = https://github.com/sonic-net/sonic-frr.git
branch = frr/8.2
branch = frr/8.5
[submodule "platform/p4/p4-hlir/p4-hlir-v1.1"]
path = platform/p4/p4-hlir/p4-hlir-v1.1
url = https://github.com/p4lang/p4-hlir.git
@ -65,9 +72,6 @@
[submodule "src/scapy"]
path = src/scapy
url = https://github.com/secdev/scapy.git
[submodule "platform/mellanox/mlnx-sai/SAI-Implementation"]
path = platform/mellanox/mlnx-sai/SAI-Implementation
url = https://github.com/Mellanox/SAI-Implementation
[submodule "src/sonic-mgmt-framework"]
path = src/sonic-mgmt-framework
url = https://github.com/sonic-net/sonic-mgmt-framework
@ -94,6 +98,7 @@
[submodule "src/linkmgrd"]
path = src/linkmgrd
url = https://github.com/sonic-net/sonic-linkmgrd.git
branch = 202305
[submodule "src/sonic-p4rt/sonic-pins"]
path = src/sonic-p4rt/sonic-pins
url = https://github.com/sonic-net/sonic-pins.git
@ -106,9 +111,11 @@
[submodule "src/sonic-host-services"]
path = src/sonic-host-services
url = https://github.com/sonic-net/sonic-host-services
branch = 202305
[submodule "src/sonic-gnmi"]
path = src/sonic-gnmi
url = https://github.com/sonic-net/sonic-gnmi.git
branch = 202305
[submodule "src/sonic-genl-packet"]
path = src/sonic-genl-packet
url = https://github.com/sonic-net/sonic-genl-packet

View File

@ -28,6 +28,7 @@ resources:
- repository: sonic-mgmt
type: github
name: sonic-net/sonic-mgmt
ref: master
endpoint: sonic-net
- repository: buildimage
type: github
@ -153,11 +154,12 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: t0
MIN_WORKER: $(T0_INSTANCE_NUM)
MAX_WORKER: $(T0_INSTANCE_NUM)
MGMT_BRANCH: "202305"
- job: t0_2vlans_elastictest
pool: ubuntu-20.04
@ -165,12 +167,13 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: t0
TEST_SET: t0-2vlans
MIN_WORKER: $(T0_2VLANS_INSTANCE_NUM)
MAX_WORKER: $(T0_2VLANS_INSTANCE_NUM)
MGMT_BRANCH: "202305"
DEPLOY_MG_EXTRA_PARAMS: "-e vlan_config=two_vlan_a"
- job: t1_lag_elastictest
@ -179,11 +182,12 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: t1-lag
MIN_WORKER: $(T1_LAG_INSTANCE_NUM)
MAX_WORKER: $(T1_LAG_INSTANCE_NUM)
MGMT_BRANCH: "202305"
- job: multi_asic_elastictest
displayName: "kvmtest-multi-asic-t1-lag by Elastictest"
@ -191,13 +195,14 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: t1-8-lag
TEST_SET: multi-asic-t1-lag
MIN_WORKER: $(MULTI_ASIC_INSTANCE_NUM)
MAX_WORKER: $(MULTI_ASIC_INSTANCE_NUM)
NUM_ASIC: 4
MGMT_BRANCH: "202305"
- job: dualtor_elastictest
pool: ubuntu-20.04
@ -205,11 +210,12 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: dualtor
MIN_WORKER: $(T0_DUALTOR_INSTANCE_NUM)
MAX_WORKER: $(T0_DUALTOR_INSTANCE_NUM)
MGMT_BRANCH: "202305"
COMMON_EXTRA_PARAMS: "--disable_loganalyzer "
- job: sonic_t0_elastictest
@ -218,25 +224,25 @@ stages:
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
- template: .azure-pipelines/run-test-elastictest-template.yml@sonic-mgmt
parameters:
TOPOLOGY: t0-64-32
MIN_WORKER: $(T0_SONIC_INSTANCE_NUM)
MAX_WORKER: $(T0_SONIC_INSTANCE_NUM)
TEST_SET: t0-sonic
COMMON_EXTRA_PARAMS: "--neighbor_type=sonic --enable_macsec --macsec_profile=128_SCI,256_XPN_SCI"
MGMT_BRANCH: "202305"
COMMON_EXTRA_PARAMS: "--neighbor_type=sonic "
VM_TYPE: vsonic
SPECIFIED_PARAMS: '{\"test_pretest.py\":[\"--completeness_level=confident\",\"--allow_recover\"],\"test_posttest.py\":[\"--completeness_level=confident\",\"--allow_recover\"]}'
- job: wan_elastictest
displayName: "kvmtest-wan by Elastictest"
pool: ubuntu-20.04
timeoutInMinutes: 240
continueOnError: false
steps:
- template: .azure-pipelines/run-test-scheduler-template.yml
parameters:
TOPOLOGY: wan-pub
MIN_WORKER: $(WAN_INSTANCE_NUM)
MAX_WORKER: $(WAN_INSTANCE_NUM)
COMMON_EXTRA_PARAMS: "--skip_sanity "
# - job: wan_elastictest
# displayName: "kvmtest-wan by Elastictest"
# pool: ubuntu-20.04
# timeoutInMinutes: 240
# continueOnError: false
# steps:
# - template: .azure-pipelines/run-test-scheduler-template.yml
# parameters:
# TOPOLOGY: wan-pub
# MIN_WORKER: $(WAN_INSTANCE_NUM)
# MAX_WORKER: $(WAN_INSTANCE_NUM)
# COMMON_EXTRA_PARAMS: "--skip_sanity "

View File

@ -447,6 +447,14 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in
systemd-sysv \
ntp
# Workaround for issue: The udev rule may fail to be executed because the
# daemon-reload command is executed in parallel
# Github issue: https://github.com/systemd/systemd/issues/24668
# Github PR: https://github.com/systemd/systemd/pull/24673
# This workaround should be removed after a upstream already contains the fixes
sudo patch $FILESYSTEM_ROOT/lib/systemd/system/systemd-udevd.service \
files/image_config/systemd/systemd-udevd/fix-udev-rule-may-fail-if-daemon-reload-command-runs.patch
if [[ $TARGET_BOOTLOADER == grub ]]; then
if [[ $CONFIGURED_ARCH == amd64 ]]; then
GRUB_PKG=grub-pc-bin
@ -537,6 +545,9 @@ sudo https_proxy=$https_proxy LANG=C chroot $FILESYSTEM_ROOT pip3 install 'docke
# Install scapy
sudo https_proxy=$https_proxy LANG=C chroot $FILESYSTEM_ROOT pip3 install 'scapy==2.4.4'
# The option --no-build-isolation can be removed when upgrading PyYAML to 6.0.1
sudo https_proxy=$https_proxy LANG=C chroot $FILESYSTEM_ROOT pip3 install 'PyYAML==5.4.1' --no-build-isolation
## Note: keep pip installed for maintainance purpose
# Install GCC, needed for building/installing some Python packages
@ -633,6 +644,10 @@ then
fi
## Set FIPS runtime default option
sudo LANG=C chroot $FILESYSTEM_ROOT /bin/bash -c "mkdir -p /etc/fips"
sudo LANG=C chroot $FILESYSTEM_ROOT /bin/bash -c "echo 0 > /etc/fips/fips_enable"
# #################
# secure boot
# #################

View File

@ -86,7 +86,7 @@ generate_onie_installer_image()
## Note: Don't leave blank between lines. It is single line command.
./onie-mk-demo.sh $CONFIGURED_ARCH $TARGET_MACHINE $TARGET_PLATFORM-$TARGET_MACHINE-$ONIEIMAGE_VERSION \
installer platform/$TARGET_MACHINE/platform.conf $output_file OS $IMAGE_VERSION $ONIE_IMAGE_PART_SIZE \
$ONIE_INSTALLER_PAYLOAD
$ONIE_INSTALLER_PAYLOAD $SECURE_UPGRADE_SIGNING_CERT $SECURE_UPGRADE_DEV_SIGNING_KEY
}
# Generate asic-specific device list

View File

@ -1,7 +1,17 @@
{
"chassis": {
"name": "DCS-7050QX-32",
"components": [],
"components": [
{
"name": "Scd(addr=0000:04:00.0)"
},
{
"name": "Ucd90120A(addr=6-004e)"
},
{
"name": "Ucd90160(addr=10-004e)"
}
],
"fans": [
{
"name": "fan1"

View File

@ -1,7 +1,23 @@
{
"chassis": {
"name": "DCS-7050QX-32S",
"components": [],
"components": [
{
"name": "Aboot()"
},
{
"name": "Scd(addr=0000:02:00.0)"
},
{
"name": "Ucd90120A(addr=4-004e)"
},
{
"name": "Ucd90120A(addr=8-004e)"
},
{
"name": "CrowSysCpld(addr=2-0023)"
}
],
"fans": [],
"fan_drawers": [
{

View File

@ -0,0 +1,104 @@
{
"interfaces": {
"Ethernet0": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet8": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet16": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet24": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet32": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet40": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet48": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet56": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet64": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet72": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet80": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet88": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet96": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet104": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet112": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet120": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet128": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet136": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet144": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet152": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet160": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet168": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet176": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet184": {
"default_brkout_mode": "2x200G[100G,50G,40G,25G,10G]"
},
"Ethernet192": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet200": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet208": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet216": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet224": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet232": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet240": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet248": {
"default_brkout_mode": "4x100G[50G,40G,25G,10G]"
},
"Ethernet256": {
"default_brkout_mode": "1x10G",
"fec": "none"
}
}
}

View File

@ -0,0 +1 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th4-a7060dx5-32-200Gx48-100Gx32.config.bcm

View File

@ -0,0 +1,879 @@
# configuration yaml file
# device:
# <unit>:
# <table>:
# ?
# <key_fld_1>: <value>
# <key_fld_2>: <value>
# ...
# <key_fld_n>: <value>
# :
# <data_fld_1>: <value>
# <data_fld_2>: <value>
# ...
# <data_fld_n>: <value>
#
---
bcm_device:
0:
global:
pktio_mode: 1
vlan_flooding_l2mc_num_reserved: 0
ipv6_lpm_128b_enable: 1
shared_block_mask_section: uc_bc
skip_protocol_default_entries: 1
# LTSW uses value 1 for ALPM combined mode
l3_alpm_template: 1
l3_alpm_hit_skip: 1
sai_feat_tail_timestamp : 1
sai_field_group_auto_prioritize: 1
#l3_intf_vlan_split_egress for MTU at L3IF
l3_intf_vlan_split_egress : 1
# vxlan
l3_alpm_template: 1
riot_overlay_l3_egress_mem_size: 16384
riot_overlay_l3_intf_mem_size: 4096
l3_ecmp_member_first_lkup_mem_size: 12288
bcm_tunnel_term_compatible_mode: 1
shared_l2_tunnel: 1
sai_tunnel_support: 10
sai_tunnel_underlay_route_mode: 2
sai_tunnel_ecmp_sharing_mode: 0 # change to 2 if SAI_NEXT_HOP_GROUP_ATTR_LEVEL_1 used
# bfd
#bfd_enable: 1
#bfd_sha1_keys: 5
#bfd_num_sessions: 2048
#bfd_simple_password_keys: 5
#num_queues_pci: 47
#num_queues_uc0: 1
#bfd_feature_enable: 1
#bfd_use_endpoint_id_as_discriminator: 1
#bfd_tx_raw_ingress_enable: 1
#sai_eapp_config_file: "/usr/share/sonic/device/x86_64-broadcom_common/eapps/eapp_config.json"
---
device:
0:
PC_SERDES_CONFIG:
PKG_SWAP_BYPASS: 1
PC_PM_CORE:
?
PC_PM_ID: 1
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x67235401
TX_LANE_MAP: 0x2731465
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 2
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x31752064
TX_LANE_MAP: 0x76025314
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 3
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x67241503
TX_LANE_MAP: 0x13650274
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x01
?
PC_PM_ID: 4
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x46025713
TX_LANE_MAP: 0x31650274
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 5
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x62713054
TX_LANE_MAP: 0x21703465
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0xd8
?
PC_PM_ID: 6
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x13460257
TX_LANE_MAP: 0x64137502
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 7
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x43512670
TX_LANE_MAP: 0x2571364
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 8
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x14270356
TX_LANE_MAP: 0x64237501
RX_POLARITY_FLIP: 0xfb
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 9
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x76140235
TX_LANE_MAP: 0x74036521
RX_POLARITY_FLIP: 0xc1
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 10
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x47125603
TX_LANE_MAP: 0x30451276
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 11
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x76041235
TX_LANE_MAP: 0x74036512
RX_POLARITY_FLIP: 0x40
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 12
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x27145603
TX_LANE_MAP: 0x21450376
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 13
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x2735146
TX_LANE_MAP: 0x3657421
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0xc8
?
PC_PM_ID: 14
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x47306521
TX_LANE_MAP: 0x12643075
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0x33
?
PC_PM_ID: 15
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x20157436
TX_LANE_MAP: 0x56237104
RX_POLARITY_FLIP: 0x08
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 16
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x14270356
TX_LANE_MAP: 0x76325014
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 49
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x56704312
TX_LANE_MAP: 0x32641570
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 50
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x21564073
TX_LANE_MAP: 0x50314762
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 51
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x36715402
TX_LANE_MAP: 0x32641075
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 52
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x51462073
TX_LANE_MAP: 0x5127634
RX_POLARITY_FLIP: 0x69
TX_POLARITY_FLIP: 0x08
?
PC_PM_ID: 53
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x73204651
TX_LANE_MAP: 0x32640175
RX_POLARITY_FLIP: 0x69
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 54
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x5134627
TX_LANE_MAP: 0x60137254
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 55
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x57420163
TX_LANE_MAP: 0x32651074
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 56
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x5134627
TX_LANE_MAP: 0x10524376
RX_POLARITY_FLIP: 0x05
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 57
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x73520146
TX_LANE_MAP: 0x31650274
RX_POLARITY_FLIP: 0x3d
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 58
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x16072354
TX_LANE_MAP: 0x51634270
RX_POLARITY_FLIP: 0x01
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 59
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x72530164
TX_LANE_MAP: 0x32506147
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 60
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x4371256
TX_LANE_MAP: 0x21673054
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0xcc
?
PC_PM_ID: 61
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x67241503
TX_LANE_MAP: 0x12730465
RX_POLARITY_FLIP: 0x20
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 62
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x73625140
TX_LANE_MAP: 0x12640573
RX_POLARITY_FLIP: 0x00
TX_POLARITY_FLIP: 0x00
?
PC_PM_ID: 63
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x23674015
TX_LANE_MAP: 0x57206143
RX_POLARITY_FLIP: 0xff
TX_POLARITY_FLIP: 0xff
?
PC_PM_ID: 64
CORE_INDEX: 0
:
RX_LANE_MAP_AUTO: 0
TX_LANE_MAP_AUTO: 0
RX_POLARITY_FLIP_AUTO: 0
TX_POLARITY_FLIP_AUTO: 0
RX_LANE_MAP: 0x57314260
TX_LANE_MAP: 0x1735264
RX_POLARITY_FLIP: 0x10
TX_POLARITY_FLIP: 0x00
...
---
device:
0:
PC_PORT_PHYS_MAP:
?
PORT_ID: 0
:
PC_PHYS_PORT_ID: 0
?
PORT_ID: 1
:
PC_PHYS_PORT_ID: 1
?
PORT_ID: 2
:
PC_PHYS_PORT_ID: 3
?
PORT_ID: 5
:
PC_PHYS_PORT_ID: 5
?
PORT_ID: 6
:
PC_PHYS_PORT_ID: 7
?
PORT_ID: 9
:
PC_PHYS_PORT_ID: 9
?
PORT_ID: 10
:
PC_PHYS_PORT_ID: 11
?
PORT_ID: 13
:
PC_PHYS_PORT_ID: 13
?
PORT_ID: 14
:
PC_PHYS_PORT_ID: 15
?
PORT_ID: 17
:
PC_PHYS_PORT_ID: 17
?
PORT_ID: 18
:
PC_PHYS_PORT_ID: 19
?
PORT_ID: 21
:
PC_PHYS_PORT_ID: 21
?
PORT_ID: 22
:
PC_PHYS_PORT_ID: 23
?
PORT_ID: 25
:
PC_PHYS_PORT_ID: 25
?
PORT_ID: 26
:
PC_PHYS_PORT_ID: 27
?
PORT_ID: 29
:
PC_PHYS_PORT_ID: 29
?
PORT_ID: 30
:
PC_PHYS_PORT_ID: 31
?
PORT_ID: 33
:
PC_PHYS_PORT_ID: 259
?
PORT_ID: 34
:
PC_PHYS_PORT_ID: 33
?
PORT_ID: 35
:
PC_PHYS_PORT_ID: 35
?
PORT_ID: 38
:
PC_PHYS_PORT_ID: 37
?
PORT_ID: 39
:
PC_PHYS_PORT_ID: 39
?
PORT_ID: 42
:
PC_PHYS_PORT_ID: 41
?
PORT_ID: 43
:
PC_PHYS_PORT_ID: 43
?
PORT_ID: 46
:
PC_PHYS_PORT_ID: 45
?
PORT_ID: 47
:
PC_PHYS_PORT_ID: 47
?
PORT_ID: 50
:
PC_PHYS_PORT_ID: 258
?
PORT_ID: 51
:
PC_PHYS_PORT_ID: 49
?
PORT_ID: 52
:
PC_PHYS_PORT_ID: 51
?
PORT_ID: 55
:
PC_PHYS_PORT_ID: 53
?
PORT_ID: 56
:
PC_PHYS_PORT_ID: 55
?
PORT_ID: 59
:
PC_PHYS_PORT_ID: 57
?
PORT_ID: 60
:
PC_PHYS_PORT_ID: 59
?
PORT_ID: 63
:
PC_PHYS_PORT_ID: 61
?
PORT_ID: 64
:
PC_PHYS_PORT_ID: 63
?
PORT_ID: 67
:
PC_PHYS_PORT_ID: 260
?
PORT_ID: 204
:
PC_PHYS_PORT_ID: 193
?
PORT_ID: 205
:
PC_PHYS_PORT_ID: 195
?
PORT_ID: 208
:
PC_PHYS_PORT_ID: 197
?
PORT_ID: 209
:
PC_PHYS_PORT_ID: 199
?
PORT_ID: 212
:
PC_PHYS_PORT_ID: 201
?
PORT_ID: 213
:
PC_PHYS_PORT_ID: 203
?
PORT_ID: 216
:
PC_PHYS_PORT_ID: 205
?
PORT_ID: 217
:
PC_PHYS_PORT_ID: 207
?
PORT_ID: 221
:
PC_PHYS_PORT_ID: 209
?
PORT_ID: 222
:
PC_PHYS_PORT_ID: 211
?
PORT_ID: 225
:
PC_PHYS_PORT_ID: 213
?
PORT_ID: 226
:
PC_PHYS_PORT_ID: 215
?
PORT_ID: 229
:
PC_PHYS_PORT_ID: 217
?
PORT_ID: 230
:
PC_PHYS_PORT_ID: 219
?
PORT_ID: 233
:
PC_PHYS_PORT_ID: 221
?
PORT_ID: 234
:
PC_PHYS_PORT_ID: 223
?
PORT_ID: 237
:
PC_PHYS_PORT_ID: 265
?
PORT_ID: 238
:
PC_PHYS_PORT_ID: 225
?
PORT_ID: 239
:
PC_PHYS_PORT_ID: 226
?
PORT_ID: 240
:
PC_PHYS_PORT_ID: 227
?
PORT_ID: 241
:
PC_PHYS_PORT_ID: 228
?
PORT_ID: 242
:
PC_PHYS_PORT_ID: 229
?
PORT_ID: 243
:
PC_PHYS_PORT_ID: 230
?
PORT_ID: 244
:
PC_PHYS_PORT_ID: 231
?
PORT_ID: 245
:
PC_PHYS_PORT_ID: 232
?
PORT_ID: 246
:
PC_PHYS_PORT_ID: 233
?
PORT_ID: 247
:
PC_PHYS_PORT_ID: 234
?
PORT_ID: 248
:
PC_PHYS_PORT_ID: 235
?
PORT_ID: 249
:
PC_PHYS_PORT_ID: 236
?
PORT_ID: 250
:
PC_PHYS_PORT_ID: 237
?
PORT_ID: 251
:
PC_PHYS_PORT_ID: 238
?
PORT_ID: 252
:
PC_PHYS_PORT_ID: 239
?
PORT_ID: 253
:
PC_PHYS_PORT_ID: 240
?
PORT_ID: 255
:
PC_PHYS_PORT_ID: 241
?
PORT_ID: 256
:
PC_PHYS_PORT_ID: 242
?
PORT_ID: 257
:
PC_PHYS_PORT_ID: 243
?
PORT_ID: 258
:
PC_PHYS_PORT_ID: 244
?
PORT_ID: 259
:
PC_PHYS_PORT_ID: 245
?
PORT_ID: 260
:
PC_PHYS_PORT_ID: 246
?
PORT_ID: 261
:
PC_PHYS_PORT_ID: 247
?
PORT_ID: 262
:
PC_PHYS_PORT_ID: 248
?
PORT_ID: 263
:
PC_PHYS_PORT_ID: 249
?
PORT_ID: 264
:
PC_PHYS_PORT_ID: 250
?
PORT_ID: 265
:
PC_PHYS_PORT_ID: 251
?
PORT_ID: 266
:
PC_PHYS_PORT_ID: 252
?
PORT_ID: 267
:
PC_PHYS_PORT_ID: 253
?
PORT_ID: 268
:
PC_PHYS_PORT_ID: 254
?
PORT_ID: 269
:
PC_PHYS_PORT_ID: 255
?
PORT_ID: 270
:
PC_PHYS_PORT_ID: 256
...
---
device:
0:
PC_PORT:
?
PORT_ID: 0
:
&port_mode_10g
ENABLE: 1
SPEED: 10000
NUM_LANES: 1
?
PORT_ID: [[50, 50]]
:
ENABLE: 0
MAX_FRAME_SIZE: 9416
SPEED: 10000
NUM_LANES: 1
?
PORT_ID: [[1, 2],
[5, 6],
[9, 10],
[13, 14],
[17, 18],
[21, 22],
[25, 26],
[29, 30],
[34, 35],
[38, 39],
[42, 43],
[46, 47],
[51, 52],
[55, 56],
[59, 60],
[63, 64],
[204, 205],
[208, 209],
[212, 213],
[216, 217],
[221, 222],
[225, 226],
[229, 230],
[233, 234]]
:
ENABLE: 0
SPEED: 200000
NUM_LANES: 4
FEC_MODE: PC_FEC_RS544_2XN
MAX_FRAME_SIZE: 9416
?
PORT_ID: [[238, 241],
[242, 245],
[246, 249],
[250, 253],
[255, 258],
[259, 262],
[263, 266],
[267, 270]]
:
ENABLE: 0
SPEED: 100000
NUM_LANES: 2
FEC_MODE: PC_FEC_RS544
MAX_FRAME_SIZE: 9416
...
---
device:
0:
# Per pipe flex counter configuration
CTR_EFLEX_CONFIG:
CTR_ING_EFLEX_OPERMODE_PIPEUNIQUE: 0
CTR_EGR_EFLEX_OPERMODE_PIPEUNIQUE: 0
# Per pipe flex state configuration
#FLEX_STATE_CONFIG:
# FLEX_STATE_ING_OPERMODE_PIPEUNIQUE: 0
# FLEX_STATE_EGR_OPERMODE_PIPEUNIQUE: 1
# Lossy vs Lossless mode
TM_THD_CONFIG:
THRESHOLD_MODE: LOSSLESS
# IFP mode
FP_CONFIG:
FP_ING_OPERMODE: GLOBAL_PIPE_AWARE
...

View File

@ -0,0 +1,114 @@
#name lanes alias index speed fec
Ethernet0 1 Ethernet1/1 1 25000
Ethernet1 5 Ethernet1/2 1 25000
Ethernet2 3 Ethernet1/3 1 25000
Ethernet3 7 Ethernet1/4 1 25000
Ethernet8 9 Ethernet2/1 2 25000
Ethernet9 13 Ethernet2/2 2 25000
Ethernet10 11 Ethernet2/3 2 25000
Ethernet11 15 Ethernet2/4 2 25000
Ethernet16 17 Ethernet3/1 3 25000
Ethernet17 21 Ethernet3/2 3 25000
Ethernet18 19 Ethernet3/3 3 25000
Ethernet19 23 Ethernet3/4 3 25000
Ethernet24 25 Ethernet4/1 4 25000
Ethernet25 29 Ethernet4/2 4 25000
Ethernet26 27 Ethernet4/3 4 25000
Ethernet27 31 Ethernet4/4 4 25000
Ethernet32 33 Ethernet5/1 5 25000
Ethernet33 37 Ethernet5/2 5 25000
Ethernet34 35 Ethernet5/3 5 25000
Ethernet35 39 Ethernet5/4 5 25000
Ethernet40 41 Ethernet6/1 6 25000
Ethernet41 45 Ethernet6/2 6 25000
Ethernet42 43 Ethernet6/3 6 25000
Ethernet43 47 Ethernet6/4 6 25000
Ethernet48 49 Ethernet7/1 7 25000
Ethernet49 53 Ethernet7/2 7 25000
Ethernet50 51 Ethernet7/3 7 25000
Ethernet51 55 Ethernet7/4 7 25000
Ethernet56 57 Ethernet8/1 8 25000
Ethernet57 61 Ethernet8/2 8 25000
Ethernet58 59 Ethernet8/3 8 25000
Ethernet59 63 Ethernet8/4 8 25000
Ethernet64 65 Ethernet9/1 9 25000
Ethernet65 69 Ethernet9/2 9 25000
Ethernet66 67 Ethernet9/3 9 25000
Ethernet67 71 Ethernet9/4 9 25000
Ethernet72 73 Ethernet10/1 10 25000
Ethernet73 77 Ethernet10/2 10 25000
Ethernet74 75 Ethernet10/3 10 25000
Ethernet75 79 Ethernet10/4 10 25000
Ethernet80 81 Ethernet11/1 11 25000
Ethernet81 85 Ethernet11/2 11 25000
Ethernet82 83 Ethernet11/3 11 25000
Ethernet83 87 Ethernet11/4 11 25000
Ethernet88 89 Ethernet12/1 12 25000
Ethernet89 93 Ethernet12/2 12 25000
Ethernet90 91 Ethernet12/3 12 25000
Ethernet91 95 Ethernet12/4 12 25000
Ethernet96 97 Ethernet13/1 13 25000
Ethernet97 101 Ethernet13/2 13 25000
Ethernet98 99 Ethernet13/3 13 25000
Ethernet99 103 Ethernet13/4 13 25000
Ethernet104 105 Ethernet14/1 14 25000
Ethernet105 109 Ethernet14/2 14 25000
Ethernet106 107 Ethernet14/3 14 25000
Ethernet107 111 Ethernet14/4 14 25000
Ethernet112 113 Ethernet15/1 15 25000
Ethernet113 117 Ethernet15/2 15 25000
Ethernet114 115 Ethernet15/3 15 25000
Ethernet115 119 Ethernet15/4 15 25000
Ethernet120 121 Ethernet16/1 16 25000
Ethernet121 125 Ethernet16/2 16 25000
Ethernet122 123 Ethernet16/3 16 25000
Ethernet123 127 Ethernet16/4 16 25000
Ethernet128 385 Ethernet17/1 17 25000
Ethernet129 389 Ethernet17/2 17 25000
Ethernet130 387 Ethernet17/3 17 25000
Ethernet131 391 Ethernet17/4 17 25000
Ethernet136 393 Ethernet18/1 18 25000
Ethernet137 397 Ethernet18/2 18 25000
Ethernet138 395 Ethernet18/3 18 25000
Ethernet139 399 Ethernet18/4 18 25000
Ethernet144 401 Ethernet19/1 19 25000
Ethernet145 405 Ethernet19/2 19 25000
Ethernet146 403 Ethernet19/3 19 25000
Ethernet147 407 Ethernet19/4 19 25000
Ethernet152 409 Ethernet20/1 20 25000
Ethernet153 413 Ethernet20/2 20 25000
Ethernet154 411 Ethernet20/3 20 25000
Ethernet155 415 Ethernet20/4 20 25000
Ethernet160 417 Ethernet21/1 21 25000
Ethernet161 421 Ethernet21/2 21 25000
Ethernet162 419 Ethernet21/3 21 25000
Ethernet163 423 Ethernet21/4 21 25000
Ethernet168 425 Ethernet22/1 22 25000
Ethernet169 429 Ethernet22/2 22 25000
Ethernet170 427 Ethernet22/3 22 25000
Ethernet171 431 Ethernet22/4 22 25000
Ethernet176 433 Ethernet23/1 23 25000
Ethernet177 437 Ethernet23/2 23 25000
Ethernet178 435 Ethernet23/3 23 25000
Ethernet179 439 Ethernet23/4 23 25000
Ethernet184 441 Ethernet24/1 24 25000
Ethernet185 445 Ethernet24/2 24 25000
Ethernet186 443 Ethernet24/3 24 25000
Ethernet187 447 Ethernet24/4 24 25000
Ethernet192 449,450,451,452 Ethernet25/1 25 100000 rs
Ethernet196 453,454,455,456 Ethernet25/5 25 100000 rs
Ethernet200 457,458,459,460 Ethernet26/1 26 100000 rs
Ethernet204 461,462,463,464 Ethernet26/5 26 100000 rs
Ethernet208 465,466,467,468 Ethernet27/1 27 100000 rs
Ethernet212 469,470,471,472 Ethernet27/5 27 100000 rs
Ethernet216 473,474,475,476 Ethernet28/1 28 100000 rs
Ethernet220 477,478,479,480 Ethernet28/5 28 100000 rs
Ethernet224 481,482,483,484 Ethernet29/1 29 200000 rs
Ethernet228 485,486,487,488 Ethernet29/5 29 200000 rs
Ethernet232 489,490,491,492 Ethernet30/1 30 200000 rs
Ethernet236 493,494,495,496 Ethernet30/5 30 200000 rs
Ethernet240 497,498,499,500 Ethernet31/1 31 200000 rs
Ethernet244 501,502,503,504 Ethernet31/5 31 200000 rs
Ethernet248 505,506,507,508 Ethernet32/1 32 200000 rs
Ethernet252 509,510,511,512 Ethernet32/5 32 200000 rs
Ethernet256 513 Ethernet33 33 10000 none

View File

@ -0,0 +1 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th4-a7060dx5-32-25Gx96-100Gx8-200Gx8.config.bcm

View File

@ -0,0 +1 @@
../../../common/profiles/th4/gen/BALANCED

View File

@ -0,0 +1,2 @@
{%- set default_topo = 't1' %}
{%- include 'buffers_config.j2' %}

View File

@ -0,0 +1 @@
BALANCED/buffers_defaults_t0.j2

View File

@ -0,0 +1 @@
BALANCED/buffers_defaults_t1.j2

View File

@ -0,0 +1,104 @@
{
"interfaces": {
"Ethernet0": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet8": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet16": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet24": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet32": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet40": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet48": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet56": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet64": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet72": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet80": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet88": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet96": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet104": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet112": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet120": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet128": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet136": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet144": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet152": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet160": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet168": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet176": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet184": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet192": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet200": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet208": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet216": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet224": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet232": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet240": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet248": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G]"
},
"Ethernet256": {
"default_brkout_mode": "1x10G",
"fec": "none"
}
}
}

View File

@ -0,0 +1 @@
BALANCED/pg_profile_lookup.ini

View File

@ -0,0 +1,34 @@
# name lanes alias index speed fec
Ethernet0 1,2,3,4,5,6,7,8 Ethernet1/1 1 400000 rs
Ethernet8 9,10,11,12,13,14,15,16 Ethernet2/1 2 400000 rs
Ethernet16 17,18,19,20,21,22,23,24 Ethernet3/1 3 400000 rs
Ethernet24 25,26,27,28,29,30,31,32 Ethernet4/1 4 400000 rs
Ethernet32 33,34,35,36,37,38,39,40 Ethernet5/1 5 400000 rs
Ethernet40 41,42,43,44,45,46,47,48 Ethernet6/1 6 400000 rs
Ethernet48 49,50,51,52,53,54,55,56 Ethernet7/1 7 400000 rs
Ethernet56 57,58,59,60,61,62,63,64 Ethernet8/1 8 400000 rs
Ethernet64 65,66,67,68,69,70,71,72 Ethernet9/1 9 400000 rs
Ethernet72 73,74,75,76,77,78,79,80 Ethernet10/1 10 400000 rs
Ethernet80 81,82,83,84,85,86,87,88 Ethernet11/1 11 400000 rs
Ethernet88 89,90,91,92,93,94,95,96 Ethernet12/1 12 400000 rs
Ethernet96 97,98,99,100,101,102,103,104 Ethernet13/1 13 400000 rs
Ethernet104 105,106,107,108,109,110,111,112 Ethernet14/1 14 400000 rs
Ethernet112 113,114,115,116,117,118,119,120 Ethernet15/1 15 400000 rs
Ethernet120 121,122,123,124,125,126,127,128 Ethernet16/1 16 400000 rs
Ethernet128 385,386,387,388,389,390,391,392 Ethernet17/1 17 400000 rs
Ethernet136 393,394,395,396,397,398,399,400 Ethernet18/1 18 400000 rs
Ethernet144 401,402,403,404,405,406,407,408 Ethernet19/1 19 400000 rs
Ethernet152 409,410,411,412,413,414,415,416 Ethernet20/1 20 400000 rs
Ethernet160 417,418,419,420,421,422,423,424 Ethernet21/1 21 400000 rs
Ethernet168 425,426,427,428,429,430,431,432 Ethernet22/1 22 400000 rs
Ethernet176 433,434,435,436,437,438,439,440 Ethernet23/1 23 400000 rs
Ethernet184 441,442,443,444,445,446,447,448 Ethernet24/1 24 400000 rs
Ethernet192 449,450,451,452,453,454,455,456 Ethernet25/1 25 400000 rs
Ethernet200 457,458,459,460,461,462,463,464 Ethernet26/1 26 400000 rs
Ethernet208 465,466,467,468,469,470,471,472 Ethernet27/1 27 400000 rs
Ethernet216 473,474,475,476,477,478,479,480 Ethernet28/1 28 400000 rs
Ethernet224 481,482,483,484,485,486,487,488 Ethernet29/1 29 400000 rs
Ethernet232 489,490,491,492,493,494,495,496 Ethernet30/1 30 400000 rs
Ethernet240 497,498,499,500,501,502,503,504 Ethernet31/1 31 400000 rs
Ethernet248 505,506,507,508,509,510,511,512 Ethernet32/1 32 400000 rs
Ethernet256 513 Ethernet33 33 10000 none

View File

@ -0,0 +1 @@
{%- include 'qos_config.j2' %}

View File

@ -0,0 +1 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th4-a7060dx5-32.config.bcm

View File

@ -0,0 +1 @@
Arista-7060DX5-32 t1

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1 @@
broadcom

View File

@ -0,0 +1,12 @@
{
"chassis": {
"DCS-7060DX5-32": {
"component": {
"Aboot()": {},
"Scd(addr=0000:00:18.7)": {},
"Scd(addr=0000:01:00.0)": {},
"LorikeetSysCpld(addr=13-0023)": {}
}
}
}
}

View File

@ -0,0 +1,2 @@
SYNCD_SHM_SIZE=512m
is_ltsw_chip=1

View File

@ -0,0 +1 @@
../x86_64-arista_common/platform_reboot

View File

@ -0,0 +1 @@
../x86_64-arista_common/plugins/

View File

@ -0,0 +1 @@
../x86_64-arista_common/pmon_daemon_control.json

View File

@ -0,0 +1,36 @@
# libsensors configuration file for DCS-7060DX4-32
# ------------------------------------------------#
bus "i2c-9" "SCD 0000:00:18.7 SMBus master 0 bus 0"
bus "i2c-29" "SCD 0000:01:00.0 SMBus master 1 bus 0"
bus "i2c-32" "SCD 0000:01:00.0 SMBus master 1 bus 3"
bus "i2c-33" "SCD 0000:01:00.0 SMBus master 1 bus 4"
chip "max6658-i2c-9-4c"
label temp1 "CPU board temp sensor"
label temp2 "Back-panel temp sensor"
chip "max6581-i2c-29-4d"
label temp1 "Center Rear"
label temp2 "Switch board right sensor"
label temp3 "Switch board left sensor"
label temp4 "Front-panel temp sensor"
label temp5 "Switch chip diode 1 sensor"
label temp6 "Switch chip diode 2 sensor"
ignore temp7
ignore temp8
chip "pmbus-i2c-32-58"
label temp1 "Power supply 1 hotspot sensor"
label temp2 "Power supply 1 inlet temp sensor"
label temp3 "Power supply 1 exhaust temp sensor"
ignore fan2
ignore fan3
chip "pmbus-i2c-33-58"
label temp1 "Power supply 2 hotspot sensor"
label temp2 "Power supply 2 inlet temp sensor"
label temp3 "Power supply 2 exhaust temp sensor"
ignore fan2
ignore fan3

View File

@ -0,0 +1 @@
../x86_64-arista_common/system_health_monitoring_config.json

View File

@ -0,0 +1 @@
../x86_64-arista_common/thermal_policy.json

View File

@ -100,12 +100,6 @@
id: 8c24
name: 'Signal processing controller: Intel Corporation 8 Series Chipset Family Thermal
Management Controller (rev 05)'
- bus: '01'
dev: '00'
fn: '0'
id: '1682'
name: 'Ethernet controller: Broadcom Limited NetXtreme BCM57762 Gigabit Ethernet
PCIe (rev 20)'
- bus: '02'
dev: '00'
fn: '0'

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,193 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False
Fabric112 112 False
Fabric113 113 False
Fabric114 114 False
Fabric115 115 False
Fabric116 116 False
Fabric117 117 False
Fabric118 118 False
Fabric119 119 False
Fabric120 120 False
Fabric121 121 False
Fabric122 122 False
Fabric123 123 False
Fabric124 124 False
Fabric125 125 False
Fabric126 126 False
Fabric127 127 False
Fabric128 128 False
Fabric129 129 False
Fabric130 130 False
Fabric131 131 False
Fabric132 132 False
Fabric133 133 False
Fabric134 134 False
Fabric135 135 False
Fabric136 136 False
Fabric137 137 False
Fabric138 138 False
Fabric139 139 False
Fabric140 140 False
Fabric141 141 False
Fabric142 142 False
Fabric143 143 False
Fabric144 144 False
Fabric145 145 False
Fabric146 146 False
Fabric147 147 False
Fabric148 148 False
Fabric149 149 False
Fabric150 150 False
Fabric151 151 False
Fabric152 152 False
Fabric153 153 False
Fabric154 154 False
Fabric155 155 False
Fabric156 156 False
Fabric157 157 False
Fabric158 158 False
Fabric159 159 False
Fabric160 160 False
Fabric161 161 False
Fabric162 162 False
Fabric163 163 False
Fabric164 164 False
Fabric165 165 False
Fabric166 166 False
Fabric167 167 False
Fabric168 168 False
Fabric169 169 False
Fabric170 170 False
Fabric171 171 False
Fabric172 172 False
Fabric173 173 False
Fabric174 174 False
Fabric175 175 False
Fabric176 176 False
Fabric177 177 False
Fabric178 178 False
Fabric179 179 False
Fabric180 180 False
Fabric181 181 False
Fabric182 182 False
Fabric183 183 False
Fabric184 184 False
Fabric185 185 False
Fabric186 186 False
Fabric187 187 False
Fabric188 188 False
Fabric189 189 False
Fabric190 190 False
Fabric191 191 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,193 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False
Fabric112 112 False
Fabric113 113 False
Fabric114 114 False
Fabric115 115 False
Fabric116 116 False
Fabric117 117 False
Fabric118 118 False
Fabric119 119 False
Fabric120 120 False
Fabric121 121 False
Fabric122 122 False
Fabric123 123 False
Fabric124 124 False
Fabric125 125 False
Fabric126 126 False
Fabric127 127 False
Fabric128 128 False
Fabric129 129 False
Fabric130 130 False
Fabric131 131 False
Fabric132 132 False
Fabric133 133 False
Fabric134 134 False
Fabric135 135 False
Fabric136 136 False
Fabric137 137 False
Fabric138 138 False
Fabric139 139 False
Fabric140 140 False
Fabric141 141 False
Fabric142 142 False
Fabric143 143 False
Fabric144 144 False
Fabric145 145 False
Fabric146 146 False
Fabric147 147 False
Fabric148 148 False
Fabric149 149 False
Fabric150 150 False
Fabric151 151 False
Fabric152 152 False
Fabric153 153 False
Fabric154 154 False
Fabric155 155 False
Fabric156 156 False
Fabric157 157 False
Fabric158 158 False
Fabric159 159 False
Fabric160 160 False
Fabric161 161 False
Fabric162 162 False
Fabric163 163 False
Fabric164 164 False
Fabric165 165 False
Fabric166 166 False
Fabric167 167 False
Fabric168 168 False
Fabric169 169 False
Fabric170 170 False
Fabric171 171 False
Fabric172 172 False
Fabric173 173 False
Fabric174 174 False
Fabric175 175 False
Fabric176 176 False
Fabric177 177 False
Fabric178 178 False
Fabric179 179 False
Fabric180 180 False
Fabric181 181 False
Fabric182 182 False
Fabric183 183 False
Fabric184 184 False
Fabric185 185 False
Fabric186 186 False
Fabric187 187 False
Fabric188 188 False
Fabric189 189 False
Fabric190 190 False
Fabric191 191 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,193 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False
Fabric112 112 False
Fabric113 113 False
Fabric114 114 False
Fabric115 115 False
Fabric116 116 False
Fabric117 117 False
Fabric118 118 False
Fabric119 119 False
Fabric120 120 False
Fabric121 121 False
Fabric122 122 False
Fabric123 123 False
Fabric124 124 False
Fabric125 125 False
Fabric126 126 False
Fabric127 127 False
Fabric128 128 False
Fabric129 129 False
Fabric130 130 False
Fabric131 131 False
Fabric132 132 False
Fabric133 133 False
Fabric134 134 False
Fabric135 135 False
Fabric136 136 False
Fabric137 137 False
Fabric138 138 False
Fabric139 139 False
Fabric140 140 False
Fabric141 141 False
Fabric142 142 False
Fabric143 143 False
Fabric144 144 False
Fabric145 145 False
Fabric146 146 False
Fabric147 147 False
Fabric148 148 False
Fabric149 149 False
Fabric150 150 False
Fabric151 151 False
Fabric152 152 False
Fabric153 153 False
Fabric154 154 False
Fabric155 155 False
Fabric156 156 False
Fabric157 157 False
Fabric158 158 False
Fabric159 159 False
Fabric160 160 False
Fabric161 161 False
Fabric162 162 False
Fabric163 163 False
Fabric164 164 False
Fabric165 165 False
Fabric166 166 False
Fabric167 167 False
Fabric168 168 False
Fabric169 169 False
Fabric170 170 False
Fabric171 171 False
Fabric172 172 False
Fabric173 173 False
Fabric174 174 False
Fabric175 175 False
Fabric176 176 False
Fabric177 177 False
Fabric178 178 False
Fabric179 179 False
Fabric180 180 False
Fabric181 181 False
Fabric182 182 False
Fabric183 183 False
Fabric184 184 False
Fabric185 185 False
Fabric186 186 False
Fabric187 187 False
Fabric188 188 False
Fabric189 189 False
Fabric190 190 False
Fabric191 191 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,113 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,113 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,113 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,113 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False

View File

@ -0,0 +1,8 @@
{
"FABRIC_MONITOR_DATA": {
"monErrThreshCrcCells": 1,
"monErrThreshRxCells": 61035156,
"monPollThreshRecovery": 8,
"monPollThreshIsolation": 1
}
}

View File

@ -0,0 +1,193 @@
# name lanes isolateStatus
Fabric0 0 False
Fabric1 1 False
Fabric2 2 False
Fabric3 3 False
Fabric4 4 False
Fabric5 5 False
Fabric6 6 False
Fabric7 7 False
Fabric8 8 False
Fabric9 9 False
Fabric10 10 False
Fabric11 11 False
Fabric12 12 False
Fabric13 13 False
Fabric14 14 False
Fabric15 15 False
Fabric16 16 False
Fabric17 17 False
Fabric18 18 False
Fabric19 19 False
Fabric20 20 False
Fabric21 21 False
Fabric22 22 False
Fabric23 23 False
Fabric24 24 False
Fabric25 25 False
Fabric26 26 False
Fabric27 27 False
Fabric28 28 False
Fabric29 29 False
Fabric30 30 False
Fabric31 31 False
Fabric32 32 False
Fabric33 33 False
Fabric34 34 False
Fabric35 35 False
Fabric36 36 False
Fabric37 37 False
Fabric38 38 False
Fabric39 39 False
Fabric40 40 False
Fabric41 41 False
Fabric42 42 False
Fabric43 43 False
Fabric44 44 False
Fabric45 45 False
Fabric46 46 False
Fabric47 47 False
Fabric48 48 False
Fabric49 49 False
Fabric50 50 False
Fabric51 51 False
Fabric52 52 False
Fabric53 53 False
Fabric54 54 False
Fabric55 55 False
Fabric56 56 False
Fabric57 57 False
Fabric58 58 False
Fabric59 59 False
Fabric60 60 False
Fabric61 61 False
Fabric62 62 False
Fabric63 63 False
Fabric64 64 False
Fabric65 65 False
Fabric66 66 False
Fabric67 67 False
Fabric68 68 False
Fabric69 69 False
Fabric70 70 False
Fabric71 71 False
Fabric72 72 False
Fabric73 73 False
Fabric74 74 False
Fabric75 75 False
Fabric76 76 False
Fabric77 77 False
Fabric78 78 False
Fabric79 79 False
Fabric80 80 False
Fabric81 81 False
Fabric82 82 False
Fabric83 83 False
Fabric84 84 False
Fabric85 85 False
Fabric86 86 False
Fabric87 87 False
Fabric88 88 False
Fabric89 89 False
Fabric90 90 False
Fabric91 91 False
Fabric92 92 False
Fabric93 93 False
Fabric94 94 False
Fabric95 95 False
Fabric96 96 False
Fabric97 97 False
Fabric98 98 False
Fabric99 99 False
Fabric100 100 False
Fabric101 101 False
Fabric102 102 False
Fabric103 103 False
Fabric104 104 False
Fabric105 105 False
Fabric106 106 False
Fabric107 107 False
Fabric108 108 False
Fabric109 109 False
Fabric110 110 False
Fabric111 111 False
Fabric112 112 False
Fabric113 113 False
Fabric114 114 False
Fabric115 115 False
Fabric116 116 False
Fabric117 117 False
Fabric118 118 False
Fabric119 119 False
Fabric120 120 False
Fabric121 121 False
Fabric122 122 False
Fabric123 123 False
Fabric124 124 False
Fabric125 125 False
Fabric126 126 False
Fabric127 127 False
Fabric128 128 False
Fabric129 129 False
Fabric130 130 False
Fabric131 131 False
Fabric132 132 False
Fabric133 133 False
Fabric134 134 False
Fabric135 135 False
Fabric136 136 False
Fabric137 137 False
Fabric138 138 False
Fabric139 139 False
Fabric140 140 False
Fabric141 141 False
Fabric142 142 False
Fabric143 143 False
Fabric144 144 False
Fabric145 145 False
Fabric146 146 False
Fabric147 147 False
Fabric148 148 False
Fabric149 149 False
Fabric150 150 False
Fabric151 151 False
Fabric152 152 False
Fabric153 153 False
Fabric154 154 False
Fabric155 155 False
Fabric156 156 False
Fabric157 157 False
Fabric158 158 False
Fabric159 159 False
Fabric160 160 False
Fabric161 161 False
Fabric162 162 False
Fabric163 163 False
Fabric164 164 False
Fabric165 165 False
Fabric166 166 False
Fabric167 167 False
Fabric168 168 False
Fabric169 169 False
Fabric170 170 False
Fabric171 171 False
Fabric172 172 False
Fabric173 173 False
Fabric174 174 False
Fabric175 175 False
Fabric176 176 False
Fabric177 177 False
Fabric178 178 False
Fabric179 179 False
Fabric180 180 False
Fabric181 181 False
Fabric182 182 False
Fabric183 183 False
Fabric184 184 False
Fabric185 185 False
Fabric186 186 False
Fabric187 187 False
Fabric188 188 False
Fabric189 189 False
Fabric190 190 False
Fabric191 191 False

View File

@ -1,4 +1,4 @@
CONSOLE_PORT=0x2f8
CONSOLE_DEV=1
CONSOLE_SPEED=9600
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich"
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich processor.max_cstate=1 intel_idle.max_cstate=0 i2c-i801.disable_features=0x10"

View File

@ -1,3 +1,3 @@
CONSOLE_PORT=0x3f8
CONSOLE_DEV=0
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich"
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich i2c-i801.disable_features=0x10"

View File

@ -0,0 +1,46 @@
{%- set default_cable = '5m' %}
{%- macro generate_port_lists(PORT_ALL) %}
{# Generate list of ports #}
{%- for port_idx in range(0,256,8) %}
{%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %}
{%- endfor %}
{%- endmacro %}
{%- macro generate_buffer_pool_and_profiles() %}
"BUFFER_POOL": {
"ingress_lossless_pool": {
"size": "37333333",
"type": "ingress",
"mode": "dynamic",
"xoff": "24000000"
},
"egress_lossy_pool": {
"size": "34000000",
"type": "egress",
"mode": "dynamic"
},
"egress_lossless_pool": {
"size": "56000000",
"type": "egress",
"mode": "static"
}
},
"BUFFER_PROFILE": {
"ingress_lossy_profile": {
"pool":"ingress_lossless_pool",
"size":"0",
"dynamic_th":"3"
},
"egress_lossless_profile": {
"pool":"egress_lossless_pool",
"size":"1518",
"static_th":"56000000"
},
"egress_lossy_profile": {
"pool":"egress_lossy_pool",
"size":"1518",
"dynamic_th":"3"
}
},
{%- endmacro %}

View File

@ -0,0 +1,46 @@
{%- set default_cable = '5m' %}
{%- macro generate_port_lists(PORT_ALL) %}
{# Generate list of ports #}
{%- for port_idx in range(0,256,8) %}
{%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %}
{%- endfor %}
{%- endmacro %}
{%- macro generate_buffer_pool_and_profiles() %}
"BUFFER_POOL": {
"ingress_lossless_pool": {
"size": "37333333",
"type": "ingress",
"mode": "dynamic",
"xoff": "24000000"
},
"egress_lossy_pool": {
"size": "34000000",
"type": "egress",
"mode": "dynamic"
},
"egress_lossless_pool": {
"size": "56000000",
"type": "egress",
"mode": "static"
}
},
"BUFFER_PROFILE": {
"ingress_lossy_profile": {
"pool":"ingress_lossless_pool",
"size":"0",
"dynamic_th":"3"
},
"egress_lossless_profile": {
"pool":"egress_lossless_pool",
"size":"1518",
"static_th":"56000000"
},
"egress_lossy_profile": {
"pool":"egress_lossy_pool",
"size":"1518",
"dynamic_th":"3"
}
},
{%- endmacro %}

View File

@ -0,0 +1,17 @@
# PG lossless profiles.
# speed cable size xon xoff threshold xon_offset
10000 5m 1248 2288 35776 0 2288
25000 5m 1248 2288 53248 0 2288
40000 5m 1248 2288 66560 0 2288
50000 5m 1248 2288 90272 0 2288
100000 5m 1248 2288 165568 0 2288
10000 40m 1248 2288 37024 0 2288
25000 40m 1248 2288 53248 0 2288
40000 40m 1248 2288 71552 0 2288
50000 40m 1248 2288 96096 0 2288
100000 40m 1248 2288 177632 0 2288
10000 300m 1248 2288 46176 0 2288
25000 300m 1248 2288 79040 0 2288
40000 300m 1248 2288 108160 0 2288
50000 300m 1248 2288 141856 0 2288
100000 300m 1248 2288 268736 0 2288

View File

@ -1,3 +1,3 @@
CONSOLE_PORT=0x2f8
CONSOLE_DEV=1
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich,wdat_wdt acpi_no_watchdog=1 nos-config-part=/dev/sda12"
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="module_blacklist=gpio_ich,wdat_wdt acpi_no_watchdog=1 nos-config-part=/dev/sda12 i2c-i801.disable_features=0x10"

View File

@ -469,7 +469,13 @@
},
{
"name": "QSFP+ or later"
}
},
{
"name": "SFP/SFP+/SFP28"
},
{
"name": "SFP/SFP+/SFP28"
}
]
},
"interfaces": {}

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700_8x50g_28x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700_8x100g_40x50g_8x10g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700_44x50g_10x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700_48x50g_8x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1 +0,0 @@
../ACS-MSN2700/sai.profile

View File

@ -0,0 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -21,13 +21,24 @@ function ParseArguments() {
}
function SafePwrCycle() {
sync ; sync
umount -fa > /dev/null 2&>1
sync; sync
umount -fa > /dev/null 2>&1
echo 1 > $SYSFS_PWR_CYCLE
}
ParseArguments "$@"
# Reboot immediately if the kdump capture kernel is running
VMCORE_FILE=/proc/vmcore
if [ -s $VMCORE_FILE ]; then
sync; sync
umount -fa > /dev/null 2>&1
# Run Debian reboot because the platform reboot isn't available
/sbin/reboot
fi
${FW_UPGRADE_SCRIPT} --upgrade --verbose
EXIT_CODE="$?"
if [[ "${EXIT_CODE}" != "${EXIT_SUCCESS}" ]]; then

View File

@ -4,77 +4,9 @@
"fan_speed_when_suspend": "60"
},
"info_types": [
{
"type": "fan_info"
},
{
"type": "psu_info"
},
{
"type": "chassis_info"
}
],
"policies": [
{
"name": "any fan absence",
"conditions": [
{
"type": "fan.any.absence"
}
],
"actions": [
{
"type": "fan.all.set_speed",
"speed": "100"
}
]
},
{
"name": "any psu absence",
"conditions": [
{
"type": "psu.any.absence"
}
],
"actions": [
{
"type": "fan.all.set_speed",
"speed": "100"
}
]
},
{
"name": "any fan broken",
"conditions": [
{
"type": "fan.any.fault"
}
],
"actions": [
{
"type": "fan.all.set_speed",
"speed": "100"
}
]
},
{
"name": "all fan and psu presence",
"conditions": [
{
"type": "fan.all.presence"
},
{
"type": "psu.all.presence"
},
{
"type": "fan.all.good"
}
],
"actions": [
{
"type": "thermal.recover"
}
]
}
]
}

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/ACS-MSN2700

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/Mellanox-SN2700

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/Mellanox-SN2700-C28D8

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D40C8S8

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D44C10

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8

View File

@ -0,0 +1 @@
Mellanox-SN2700-A1 t1

View File

@ -0,0 +1 @@
ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="logs_inram=on"

View File

@ -0,0 +1,436 @@
#
# Copyright (c) 2023 NVIDIA CORPORATION & AFFILIATES.
# Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
- bus: '00'
dev: '00'
fn: '0'
id: 6f00
name: 'Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2
(rev 03)'
- bus: '00'
dev: '01'
fn: '0'
id: 6f02
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 1 (rev 03)'
- bus: '00'
dev: '01'
fn: '1'
id: 6f03
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 1 (rev 03)'
- bus: '00'
dev: '02'
fn: '0'
id: 6f04
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 2 (rev 03)'
- bus: '00'
dev: '02'
fn: '2'
id: 6f06
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 2 (rev 03)'
- bus: '00'
dev: '03'
fn: '0'
id: 6f08
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 3 (rev 03)'
- bus: '00'
dev: '03'
fn: '1'
id: 6f09
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 3 (rev 03)'
- bus: '00'
dev: '03'
fn: '2'
id: 6f0a
name: 'PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI
Express Root Port 3 (rev 03)'
- bus: '00'
dev: '05'
fn: '0'
id: 6f28
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Map/VTd_Misc/System Management (rev 03)'
- bus: '00'
dev: '05'
fn: '1'
id: 6f29
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D IIO Hot Plug (rev 03)'
- bus: '00'
dev: '05'
fn: '2'
id: 6f2a
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D IIO RAS/Control Status/Global Errors (rev 03)'
- bus: '00'
dev: '05'
fn: '4'
id: 6f2c
name: 'PIC: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev
03)'
- bus: '00'
dev: '14'
fn: '0'
id: 8c31
name: 'USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB
xHCI (rev 05)'
- bus: '00'
dev: 1c
fn: '0'
id: 8c10
name: 'PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express
Root Port #1 (rev d5)'
- bus: '00'
dev: 1c
fn: '7'
id: 8c1e
name: 'PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express
Root Port #8 (rev d5)'
- bus: '00'
dev: 1d
fn: '0'
id: 8c26
name: 'USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB
EHCI #1 (rev 05)'
- bus: '00'
dev: 1f
fn: '0'
id: 8c54
name: 'ISA bridge: Intel Corporation C224 Series Chipset Family Server Standard
SKU LPC Controller (rev 05)'
- bus: '00'
dev: 1f
fn: '2'
id: 8c02
name: 'SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port
SATA Controller 1 [AHCI mode] (rev 05)'
- bus: '00'
dev: 1f
fn: '3'
id: 8c22
name: 'SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller
(rev 05)'
- bus: '03'
dev: '00'
fn: '0'
id: 6f50
name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology
Register DMA Channel 0'
- bus: '03'
dev: '00'
fn: '1'
id: 6f51
name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology
Register DMA Channel 1'
- bus: '03'
dev: '00'
fn: '2'
id: 6f52
name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology
Register DMA Channel 2'
- bus: '03'
dev: '00'
fn: '3'
id: 6f53
name: 'System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology
Register DMA Channel 3'
- bus: '07'
dev: '00'
fn: '0'
id: cb84
name: 'Ethernet controller: Mellanox Technologies MT52100'
- bus: 08
dev: '00'
fn: '0'
id: '1533'
name: 'Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev
03)'
- bus: 09
dev: '00'
fn: '0'
id: '1533'
name: 'Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev
03)'
- bus: ff
dev: 0b
fn: '0'
id: 6f81
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R3 QPI Link 0/1 (rev 03)'
- bus: ff
dev: 0b
fn: '1'
id: 6f36
name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R3 QPI Link 0/1 (rev 03)'
- bus: ff
dev: 0b
fn: '2'
id: 6f37
name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R3 QPI Link 0/1 (rev 03)'
- bus: ff
dev: 0b
fn: '3'
id: 6f76
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R3 QPI Link Debug (rev 03)'
- bus: ff
dev: 0c
fn: '0'
id: 6fe0
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: 0c
fn: '1'
id: 6fe1
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: 0f
fn: '0'
id: 6ff8
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: 0f
fn: '4'
id: 6ffc
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: 0f
fn: '5'
id: 6ffd
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: 0f
fn: '6'
id: 6ffe
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Caching Agent (rev 03)'
- bus: ff
dev: '10'
fn: '0'
id: 6f1d
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R2PCIe Agent (rev 03)'
- bus: ff
dev: '10'
fn: '1'
id: 6f34
name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D R2PCIe Agent (rev 03)'
- bus: ff
dev: '10'
fn: '5'
id: 6f1e
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Ubox (rev 03)'
- bus: ff
dev: '10'
fn: '6'
id: 6f7d
name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Ubox (rev 03)'
- bus: ff
dev: '10'
fn: '7'
id: 6f1f
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Ubox (rev 03)'
- bus: ff
dev: '12'
fn: '0'
id: 6fa0
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Home Agent 0 (rev 03)'
- bus: ff
dev: '12'
fn: '1'
id: 6f30
name: 'Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Home Agent 0 (rev 03)'
- bus: ff
dev: '13'
fn: '0'
id: 6fa8
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)'
- bus: ff
dev: '13'
fn: '1'
id: 6f71
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)'
- bus: ff
dev: '13'
fn: '2'
id: 6faa
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
- bus: ff
dev: '13'
fn: '3'
id: 6fab
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
- bus: ff
dev: '13'
fn: '4'
id: 6fac
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
- bus: ff
dev: '13'
fn: '5'
id: 6fad
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
- bus: ff
dev: '13'
fn: '6'
id: 6fae
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Channel 0/1 Broadcast (rev 03)'
- bus: ff
dev: '13'
fn: '7'
id: 6faf
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Global Broadcast (rev 03)'
- bus: ff
dev: '14'
fn: '0'
id: 6fb0
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 0 Thermal Control (rev 03)'
- bus: ff
dev: '14'
fn: '1'
id: 6fb1
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 1 Thermal Control (rev 03)'
- bus: ff
dev: '14'
fn: '2'
id: 6fb2
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 0 Error (rev 03)'
- bus: ff
dev: '14'
fn: '3'
id: 6fb3
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 1 Error (rev 03)'
- bus: ff
dev: '14'
fn: '4'
id: 6fbc
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Channel 0/1 Interface (rev 03)'
- bus: ff
dev: '14'
fn: '5'
id: 6fbd
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Channel 0/1 Interface (rev 03)'
- bus: ff
dev: '14'
fn: '6'
id: 6fbe
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Channel 0/1 Interface (rev 03)'
- bus: ff
dev: '14'
fn: '7'
id: 6fbf
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D DDRIO Channel 0/1 Interface (rev 03)'
- bus: ff
dev: '15'
fn: '0'
id: 6fb4
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 2 Thermal Control (rev 03)'
- bus: ff
dev: '15'
fn: '1'
id: 6fb5
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 3 Thermal Control (rev 03)'
- bus: ff
dev: '15'
fn: '2'
id: 6fb6
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 2 Error (rev 03)'
- bus: ff
dev: '15'
fn: '3'
id: 6fb7
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Memory Controller 0 - Channel 3 Error (rev 03)'
- bus: ff
dev: 1e
fn: '0'
id: 6f98
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1e
fn: '1'
id: 6f99
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1e
fn: '2'
id: 6f9a
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1e
fn: '3'
id: 6fc0
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1e
fn: '4'
id: 6f9c
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1f
fn: '0'
id: 6f88
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'
- bus: ff
dev: 1f
fn: '2'
id: 6f8a
name: 'System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon
D Power Control Unit (rev 03)'

View File

@ -0,0 +1,642 @@
{
"chassis": {
"name": "MSN2700",
"components": [
{
"name": "ONIE"
},
{
"name": "SSD"
},
{
"name": "BIOS"
},
{
"name": "CPLD1"
},
{
"name": "CPLD2"
},
{
"name": "CPLD3"
},
{
"name": "CPLD4"
}
],
"fans": [],
"fan_drawers": [
{
"name": "drawer1",
"fans": [
{
"name": "fan1"
},
{
"name": "fan2"
}
]
},
{
"name": "drawer2",
"fans": [
{
"name": "fan3"
},
{
"name": "fan4"
}
]
},
{
"name": "drawer3",
"fans": [
{
"name": "fan5"
},
{
"name": "fan6"
}
]
},
{
"name": "drawer4",
"fans": [
{
"name": "fan7"
},
{
"name": "fan8"
}
]
}
],
"psus": [
{
"name": "PSU 1",
"fans": [
{
"name": "psu1_fan1"
}
],
"thermals": [
{
"name": "PSU-1 Temp"
}
]
},
{
"name": "PSU 2",
"fans": [
{
"name": "psu2_fan1"
}
],
"thermals": [
{
"name": "PSU-2 Temp"
}
]
}
],
"thermals": [
{
"name": "ASIC"
},
{
"name": "Ambient Fan Side Temp"
},
{
"name": "Ambient Port Side Temp"
},
{
"name": "Ambient COMEX Temp"
},
{
"name": "CPU Core 0 Temp"
},
{
"name": "CPU Core 1 Temp"
},
{
"name": "CPU Pack Temp"
}
],
"sfps": [
{
"name": "sfp1",
"thermals": [
{
"name": "xSFP module 1 Temp"
}
]
},
{
"name": "sfp2",
"thermals": [
{
"name": "xSFP module 2 Temp"
}
]
},
{
"name": "sfp3",
"thermals": [
{
"name": "xSFP module 3 Temp"
}
]
},
{
"name": "sfp4",
"thermals": [
{
"name": "xSFP module 4 Temp"
}
]
},
{
"name": "sfp5",
"thermals": [
{
"name": "xSFP module 5 Temp"
}
]
},
{
"name": "sfp6",
"thermals": [
{
"name": "xSFP module 6 Temp"
}
]
},
{
"name": "sfp7",
"thermals": [
{
"name": "xSFP module 7 Temp"
}
]
},
{
"name": "sfp8",
"thermals": [
{
"name": "xSFP module 8 Temp"
}
]
},
{
"name": "sfp9",
"thermals": [
{
"name": "xSFP module 9 Temp"
}
]
},
{
"name": "sfp10",
"thermals": [
{
"name": "xSFP module 10 Temp"
}
]
},
{
"name": "sfp11",
"thermals": [
{
"name": "xSFP module 11 Temp"
}
]
},
{
"name": "sfp12",
"thermals": [
{
"name": "xSFP module 12 Temp"
}
]
},
{
"name": "sfp13",
"thermals": [
{
"name": "xSFP module 13 Temp"
}
]
},
{
"name": "sfp14",
"thermals": [
{
"name": "xSFP module 14 Temp"
}
]
},
{
"name": "sfp15",
"thermals": [
{
"name": "xSFP module 15 Temp"
}
]
},
{
"name": "sfp16",
"thermals": [
{
"name": "xSFP module 16 Temp"
}
]
},
{
"name": "sfp17",
"thermals": [
{
"name": "xSFP module 17 Temp"
}
]
},
{
"name": "sfp18",
"thermals": [
{
"name": "xSFP module 18 Temp"
}
]
},
{
"name": "sfp19",
"thermals": [
{
"name": "xSFP module 19 Temp"
}
]
},
{
"name": "sfp20",
"thermals": [
{
"name": "xSFP module 20 Temp"
}
]
},
{
"name": "sfp21",
"thermals": [
{
"name": "xSFP module 21 Temp"
}
]
},
{
"name": "sfp22",
"thermals": [
{
"name": "xSFP module 22 Temp"
}
]
},
{
"name": "sfp23",
"thermals": [
{
"name": "xSFP module 23 Temp"
}
]
},
{
"name": "sfp24",
"thermals": [
{
"name": "xSFP module 24 Temp"
}
]
},
{
"name": "sfp25",
"thermals": [
{
"name": "xSFP module 25 Temp"
}
]
},
{
"name": "sfp26",
"thermals": [
{
"name": "xSFP module 26 Temp"
}
]
},
{
"name": "sfp27",
"thermals": [
{
"name": "xSFP module 27 Temp"
}
]
},
{
"name": "sfp28",
"thermals": [
{
"name": "xSFP module 28 Temp"
}
]
},
{
"name": "sfp29",
"thermals": [
{
"name": "xSFP module 29 Temp"
}
]
},
{
"name": "sfp30",
"thermals": [
{
"name": "xSFP module 30 Temp"
}
]
},
{
"name": "sfp31",
"thermals": [
{
"name": "xSFP module 31 Temp"
}
]
},
{
"name": "sfp32",
"thermals": [
{
"name": "xSFP module 32 Temp"
}
]
}
]
},
"interfaces": {
"Ethernet0": {
"index": "1,1,1,1",
"lanes": "0,1,2,3",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp1"],
"2x50G[25G,10G]": ["etp1a", "etp1b"]
}
},
"Ethernet4": {
"index": "2,2,2,2",
"lanes": "4,5,6,7",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp2"],
"2x50G[25G,10G]": ["etp2a", "etp2b"]
}
},
"Ethernet8": {
"index": "3,3,3,3",
"lanes": "8,9,10,11",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp3"],
"2x50G[25G,10G]": ["etp3a", "etp3b"]
}
},
"Ethernet12": {
"index": "4,4,4,4",
"lanes": "12,13,14,15",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp4"],
"2x50G[25G,10G]": ["etp4a", "etp4b"]
}
},
"Ethernet16": {
"index": "5,5,5,5",
"lanes": "16,17,18,19",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp5"],
"2x50G[25G,10G]": ["etp5a", "etp5b"]
}
},
"Ethernet20": {
"index": "6,6,6,6",
"lanes": "20,21,22,23",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp6"],
"2x50G[25G,10G]": ["etp6a", "etp6b"]
}
},
"Ethernet24": {
"index": "7,7,7,7",
"lanes": "24,25,26,27",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp7"],
"2x50G[25G,10G]": ["etp7a", "etp7b"]
}
},
"Ethernet28": {
"index": "8,8,8,8",
"lanes": "28,29,30,31",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp8"],
"2x50G[25G,10G]": ["etp8a", "etp8b"]
}
},
"Ethernet32": {
"index": "9,9,9,9",
"lanes": "32,33,34,35",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp9"],
"2x50G[25G,10G]": ["etp9a", "etp9b"]
}
},
"Ethernet36": {
"index": "10,10,10,10",
"lanes": "36,37,38,39",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp10"],
"2x50G[25G,10G]": ["etp10a", "etp10b"]
}
},
"Ethernet40": {
"index": "11,11,11,11",
"lanes": "40,41,42,43",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp11"],
"2x50G[25G,10G]": ["etp11a", "etp11b"]
}
},
"Ethernet44": {
"index": "12,12,12,12",
"lanes": "44,45,46,47",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp12"],
"2x50G[25G,10G]": ["etp12a", "etp12b"]
}
},
"Ethernet48": {
"index": "13,13,13,13",
"lanes": "48,49,50,51",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp13"],
"2x50G[25G,10G]": ["etp13a", "etp13b"]
}
},
"Ethernet52": {
"index": "14,14,14,14",
"lanes": "52,53,54,55",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp14"],
"2x50G[25G,10G]": ["etp14a", "etp14b"]
}
},
"Ethernet56": {
"index": "15,15,15,15",
"lanes": "56,57,58,59",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp15"],
"2x50G[25G,10G]": ["etp15a", "etp15b"]
}
},
"Ethernet60": {
"index": "16,16,16,16",
"lanes": "60,61,62,63",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp16"],
"2x50G[25G,10G]": ["etp16a", "etp16b"]
}
},
"Ethernet64": {
"index": "17,17,17,17",
"lanes": "64,65,66,67",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp17"],
"2x50G[25G,10G]": ["etp17a", "etp17b"]
}
},
"Ethernet68": {
"index": "18,18,18,18",
"lanes": "68,69,70,71",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp18"],
"2x50G[25G,10G]": ["etp18a", "etp18b"]
}
},
"Ethernet72": {
"index": "19,19,19,19",
"lanes": "72,73,74,75",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp19"],
"2x50G[25G,10G]": ["etp19a", "etp19b"]
}
},
"Ethernet76": {
"index": "20,20,20,20",
"lanes": "76,77,78,79",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp20"],
"2x50G[25G,10G]": ["etp20a", "etp20b"]
}
},
"Ethernet80": {
"index": "21,21,21,21",
"lanes": "80,81,82,83",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp21"],
"2x50G[25G,10G]": ["etp21a", "etp21b"]
}
},
"Ethernet84": {
"index": "22,22,22,22",
"lanes": "84,85,86,87",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp22"],
"2x50G[25G,10G]": ["etp22a", "etp22b"]
}
},
"Ethernet88": {
"index": "23,23,23,23",
"lanes": "88,89,90,91",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp23"],
"2x50G[25G,10G]": ["etp23a", "etp23b"]
}
},
"Ethernet92": {
"index": "24,24,24,24",
"lanes": "92,93,94,95",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp24"],
"2x50G[25G,10G]": ["etp24a", "etp24b"]
}
},
"Ethernet96": {
"index": "25,25,25,25",
"lanes": "96,97,98,99",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp25"],
"2x50G[25G,10G]": ["etp25a", "etp25b"]
}
},
"Ethernet100": {
"index": "26,26,26,26",
"lanes": "100,101,102,103",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp26"],
"2x50G[25G,10G]": ["etp26a", "etp26b"]
}
},
"Ethernet104": {
"index": "27,27,27,27",
"lanes": "104,105,106,107",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp27"],
"2x50G[25G,10G]": ["etp27a", "etp27b"]
}
},
"Ethernet108": {
"index": "28,28,28,28",
"lanes": "108,109,110,111",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp28"],
"2x50G[25G,10G]": ["etp28a", "etp28b"]
}
},
"Ethernet112": {
"index": "29,29,29,29",
"lanes": "112,113,114,115",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp29"],
"2x50G[25G,10G]": ["etp29a", "etp29b"]
}
},
"Ethernet116": {
"index": "30,30,30,30",
"lanes": "116,117,118,119",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp30"],
"2x50G[25G,10G]": ["etp30a", "etp30b"]
}
},
"Ethernet120": {
"index": "31,31,31,31",
"lanes": "120,121,122,123",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp31"],
"2x50G[25G,10G]": ["etp31a", "etp31b"]
}
},
"Ethernet124": {
"index": "32,32,32,32",
"lanes": "124,125,126,127",
"breakout_modes": {
"1x100G[50G,40G,25G,10G]": ["etp32"],
"2x50G[25G,10G]": ["etp32a", "etp32b"]
}
}
}
}

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/platform_asic

View File

@ -0,0 +1,15 @@
{
"chassis": {
"MSN2700": {
"component": {
"ONIE": { },
"SSD": { },
"BIOS": { },
"CPLD1": { },
"CPLD2": { },
"CPLD3": { },
"CPLD4": { }
}
}
}
}

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/platform_reboot

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/platform_wait

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/plugins

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/pmon_daemon_control.json

View File

@ -0,0 +1,178 @@
#
# Copyright (c) 2023 NVIDIA CORPORATION & AFFILIATES.
# Apache-2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Bus names
bus "i2c-17" "i2c-1-mux (chan_id 8)"
# Temperature sensors
chip "mlxsw-i2c-*-48"
label temp1 "Ambient ASIC Temp"
chip "tmp102-i2c-*-49"
label temp1 "Ambient COMEX Temp"
chip "lm75-i2c-*-4a"
label temp1 "Ambient Port Temp"
chip "tmp75-i2c-*-4a"
label temp1 "Ambient Port Temp"
chip "lm75-i2c-17-49"
label temp1 "Ambient Board Temp"
chip "tmp75-i2c-17-49"
label temp1 "Ambient Board Temp"
# Power controllers
chip "pmbus-i2c-*-27"
label in1 "PMB-2 PSU 12V Rail (in)"
label in2 "PMB-2 3.3V Rail (out)"
label in3 "PMB-2 1.2V Rail (out)"
label temp1 "PMB-2 Temp 1"
label temp2 "PMB-2 Temp 2"
ignore power1
label power2 "PMB-2 3.3V Rail Pwr (out)"
label power3 "PMB-2 1.2V Rail Pwr (out)"
ignore curr1
label curr2 "PMB-2 3.3V Rail Curr (out)"
label curr3 "PMB-2 1.2V Rail Curr (out)"
chip "pmbus-i2c-*-41"
label in1 "PMB-1 PSU 12V Rail (in)"
label in2 "PMB-1 0.9V VCORE Rail (out)"
label temp1 "PMB-1 Temp 1"
label temp2 "PMB-1 Temp 2"
ignore power1
label power2 "PMB-1 0.9V VCORE Rail Pwr (out)"
ignore curr1
label curr2 "PMB-1 0.9V VCORE Rail Curr (out)"
chip "tps53679-i2c-*-58"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 PSU 12V Rail (in2)"
label in3 "PMIC-3 COMEX 1.8V Rail (out)"
label in4 "PMIC-3 COMEX 1.05V Rail (out)"
label temp1 "PMIC-3 Temp 1"
label temp2 "PMIC-3 Temp 2"
label power1 "PMIC-3 COMEX 1.8V Rail Pwr (out)"
label power2 "PMIC-3 COMEX 1.05V Rail Pwr (out)"
ignore power3
label curr1 "PMIC-3 COMEX 1.8V Rail Curr (out)"
label curr2 "PMIC-3 COMEX 1.05V Rail Curr (out)"
ignore curr3
chip "tps53679-i2c-*-61"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 PSU 12V Rail (in2)"
label in3 "PMIC-4 COMEX 1.2V Rail (out)"
ignore in4
label temp1 "PMIC-4 Temp 1"
label temp2 "PMIC-4 Temp 2"
label power1 "PMIC-4 COMEX 1.2V Rail Pwr (out)"
ignore power2
ignore power3
label curr1 "PMIC-4 COMEX 1.2V Rail Curr (out)"
ignore curr2
ignore curr3
chip "mp2975-i2c-*-6a"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 COMEX 1.8V Rail (out)"
label in3 "PMIC-3 COMEX 1.05V Rail (out)"
label temp1 "PMIC-3 Temp 1"
label power1 "PMIC-3 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-3 COMEX 1.8V Rail Pwr (out)"
label power3 "PMIC-3 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-3 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-3 COMEX 1.8V Rail Curr (out)"
ignore curr3
ignore curr4
label curr5 "PMIC-3 COMEX 1.05V Rail Curr (out)"
ignore curr6
chip "mp2975-i2c-*-61"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 COMEX 1.2V Rail (out)"
label temp1 "PMIC-4 Temp 1"
label temp2 "PMIC-4 Temp 2"
label power1 "PMIC-4 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-4 COMEX 1.2V Rail Pwr (out)"
label curr1 "PMIC-4 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-4 COMEX 1.2V Rail Curr (out)"
ignore curr3
chip "xdpe15284-i2c-*-6a"
label in1 "PMIC-3 PSU 12V Rail (in1)"
label in2 "PMIC-3 COMEX 1.8V Rail (out)"
label in3 "PMIC-3 COMEX 1.05V Rail (out)"
label temp1 "PMIC-3 Temp 1"
label power1 "PMIC-3 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-3 COMEX 1.8V Rail Pwr (out)"
label power3 "PMIC-3 COMEX 1.05V Rail Pwr (out)"
label curr1 "PMIC-3 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-3 COMEX 1.8V Rail Curr (out)"
ignore curr3
ignore curr4
label curr5 "PMIC-3 COMEX 1.05V Rail Curr (out)"
ignore curr6
chip "xdpe15284-i2c-*-61"
label in1 "PMIC-4 PSU 12V Rail (in1)"
label in2 "PMIC-4 COMEX 1.2V Rail (out)"
label temp1 "PMIC-4 Temp 1"
label temp2 "PMIC-4 Temp 2"
label power1 "PMIC-4 COMEX 12V Rail Pwr (in)"
label power2 "PMIC-4 COMEX 1.2V Rail Pwr (out)"
label curr1 "PMIC-4 COMEX 12V Rail Curr (in)"
label curr2 "PMIC-4 COMEX 1.2V Rail Curr (out)"
ignore curr3
# Power supplies
chip "dps460-i2c-*-58"
label in1 "PSU-2(R) 220V Rail (in)"
label in2 "PSU-2(R) 12V Rail (out)"
label fan1 "PSU-2(R) Fan 1"
label temp1 "PSU-2(R) Temp 1"
label temp2 "PSU-2(R) Temp 2"
label power1 "PSU-2(R) 220V Rail Pwr (in)"
label power2 "PSU-2(R) 12V Rail Pwr (out)"
label curr1 "PSU-2(R) 220V Rail Curr (in)"
label curr2 "PSU-2(R) 12V Rail Curr (out)"
chip "dps460-i2c-*-59"
label in1 "PSU-1(L) 220V Rail (in)"
label in2 "PSU-1(L) 12V Rail (out)"
label fan1 "PSU-1(L) Fan 1"
label temp1 "PSU-1(L) Temp 1"
label temp2 "PSU-1(L) Temp 2"
label power1 "PSU-1(L) 220V Rail Pwr (in)"
label power2 "PSU-1(L) 12V Rail Pwr (out)"
label curr1 "PSU-1(L) 220V Rail Curr (in)"
label curr2 "PSU-1(L) 12V Rail Curr (out)"
# Chassis fans
chip "mlxreg_fan-isa-*"
label fan1 "Chassis Drawer-1 Fan-1"
label fan2 "Chassis Drawer-1 Fan-2"
label fan3 "Chassis Drawer-2 Fan-1"
label fan4 "Chassis Drawer-2 Fan-2"
label fan5 "Chassis Drawer-3 Fan-1"
label fan6 "Chassis Drawer-3 Fan-2"
label fan7 "Chassis Drawer-4 Fan-1"
label fan8 "Chassis Drawer-4 Fan-2"
# SSD
chip "drivetemp-*"
label temp1 "SSD Temp"

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/system_health_monitoring_config.json

View File

@ -0,0 +1 @@
../x86_64-mlnx_msn2700-r0/thermal_policy.json

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3420.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3700.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3700c.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

View File

@ -1,3 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_2x10g_100x50g_12x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_112x50g_8x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_24x50g_52x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_1x10g_28x50g_49x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,3 +1,5 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_3800_28x50g_52x100g.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg
SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD=1

View File

@ -1,76 +1,76 @@
{
"interfaces": {
"Ethernet0": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet8": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet16": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet24": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet32": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet40": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet48": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet56": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet64": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet72": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet80": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet88": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet96": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet104": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet112": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet120": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet128": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet136": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet144": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet152": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet160": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet168": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet176": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet184": {
"default_brkout_mode": "2x100G[50G,40G,25G,10G,1G]"
"default_brkout_mode": "2x100G[200G,50G,40G,25G,10G,1G]"
},
"Ethernet192": {
"default_brkout_mode": "1x400G[200G,100G,50G,40G,25G,10G,1G]"

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_4410.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

View File

@ -411,216 +411,288 @@
"index": "1,1,1,1,1,1,1,1",
"lanes": "0,1,2,3,4,5,6,7",
"breakout_modes": {
"1x50G(1)": ["etp1"],
"1x100G(2)": ["etp1"],
"1x200G(4)": ["etp1"],
"1x100G[50G,40G,25G,10G,1G]": ["etp1"],
"2x100G[50G,40G,25G,10G,1G]": ["etp1a", "etp1b"],
"4x50G[25G,10G,1G]": ["etp1a", "etp1b", "etp1c", "etp1d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp1a", "etp1b"],
"4x100G[50G,25G,10G,1G]": ["etp1a", "etp1b", "etp1c", "etp1d"]
}
},
"Ethernet8": {
"index": "2,2,2,2,2,2,2,2",
"lanes": "8,9,10,11,12,13,14,15",
"breakout_modes": {
"1x50G(1)": ["etp2"],
"1x100G(2)": ["etp2"],
"1x200G(4)": ["etp2"],
"1x100G[50G,40G,25G,10G,1G]": ["etp2"],
"2x100G[50G,40G,25G,10G,1G]": ["etp2a", "etp2b"],
"4x50G[25G,10G,1G]": ["etp2a", "etp2b", "etp2c", "etp2d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp2a", "etp2b"],
"4x100G[50G,25G,10G,1G]": ["etp2a", "etp2b", "etp2c", "etp2d"]
}
},
"Ethernet16": {
"index": "3,3,3,3,3,3,3,3",
"lanes": "16,17,18,19,20,21,22,23",
"breakout_modes": {
"1x50G(1)": ["etp3"],
"1x100G(2)": ["etp3"],
"1x200G(4)": ["etp3"],
"1x100G[50G,40G,25G,10G,1G]": ["etp3"],
"2x100G[50G,40G,25G,10G,1G]": ["etp3a", "etp3b"],
"4x50G[25G,10G,1G]": ["etp3a", "etp3b", "etp3c", "etp3d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp3a", "etp3b"],
"4x100G[50G,25G,10G,1G]": ["etp3a", "etp3b", "etp3c", "etp3d"]
}
},
"Ethernet24": {
"index": "4,4,4,4,4,4,4,4",
"lanes": "24,25,26,27,28,29,30,31",
"breakout_modes": {
"1x50G(1)": ["etp4"],
"1x100G(2)": ["etp4"],
"1x200G(4)": ["etp4"],
"1x100G[50G,40G,25G,10G,1G]": ["etp4"],
"2x100G[50G,40G,25G,10G,1G]": ["etp4a", "etp4b"],
"4x50G[25G,10G,1G]": ["etp4a", "etp4b", "etp4c", "etp4d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp4a", "etp4b"],
"4x100G[50G,25G,10G,1G]": ["etp4a", "etp4b", "etp4c", "etp4d"]
}
},
"Ethernet32": {
"index": "5,5,5,5,5,5,5,5,5",
"lanes": "32,33,34,35,36,37,38,39",
"breakout_modes": {
"1x50G(1)": ["etp5"],
"1x100G(2)": ["etp5"],
"1x200G(4)": ["etp5"],
"1x100G[50G,40G,25G,10G,1G]": ["etp5"],
"2x100G[50G,40G,25G,10G,1G]": ["etp5a", "etp5b"],
"4x50G[25G,10G,1G]": ["etp5a", "etp5b", "etp5c", "etp5d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp5a", "etp5b"],
"4x100G[50G,25G,10G,1G]": ["etp5a", "etp5b", "etp5c", "etp5d"]
}
},
"Ethernet40": {
"index": "6,6,6,6,6,6,6,6",
"lanes": "40,41,42,43,44,45,46,47",
"breakout_modes": {
"1x50G(1)": ["etp6"],
"1x100G(2)": ["etp6"],
"1x200G(4)": ["etp6"],
"1x100G[50G,40G,25G,10G,1G]": ["etp6"],
"2x100G[50G,40G,25G,10G,1G]": ["etp6a", "etp6b"],
"4x50G[25G,10G,1G]": ["etp6a", "etp6b", "etp6c", "etp6d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp6a", "etp6b"],
"4x100G[50G,25G,10G,1G]": ["etp6a", "etp6b", "etp6c", "etp6d"]
}
},
"Ethernet48": {
"index": "7,7,7,7,7,7,7,7",
"lanes": "48,49,50,51,52,53,54,55",
"breakout_modes": {
"1x50G(1)": ["etp7"],
"1x100G(2)": ["etp7"],
"1x200G(4)": ["etp7"],
"1x100G[50G,40G,25G,10G,1G]": ["etp7"],
"2x100G[50G,40G,25G,10G,1G]": ["etp7a", "etp7b"],
"4x50G[25G,10G,1G]": ["etp7a", "etp7b", "etp7c", "etp7d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp7a", "etp7b"],
"4x100G[50G,25G,10G,1G]": ["etp7a", "etp7b", "etp7c", "etp7d"]
}
},
"Ethernet56": {
"index": "8,8,8,8,8,8,8,8",
"lanes": "56,57,58,59,60,61,62,63",
"breakout_modes": {
"1x50G(1)": ["etp8"],
"1x100G(2)": ["etp8"],
"1x200G(4)": ["etp8"],
"1x100G[50G,40G,25G,10G,1G]": ["etp8"],
"2x100G[50G,40G,25G,10G,1G]": ["etp8a", "etp8b"],
"4x50G[25G,10G,1G]": ["etp8a", "etp8b", "etp8c", "etp8d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp8a", "etp8b"],
"4x100G[50G,25G,10G,1G]": ["etp8a", "etp8b", "etp8c", "etp8d"]
}
},
"Ethernet64": {
"index": "9,9,9,9,9,9,9,9",
"lanes": "64,65,66,67,68,69,70,71",
"breakout_modes": {
"1x50G(1)": ["etp9"],
"1x100G(2)": ["etp9"],
"1x200G(4)": ["etp9"],
"1x100G[50G,40G,25G,10G,1G]": ["etp9"],
"2x100G[50G,40G,25G,10G,1G]": ["etp9a", "etp9b"],
"4x50G[25G,10G,1G]": ["etp9a", "etp9b", "etp9c", "etp9d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp9a", "etp9b"],
"4x100G[50G,25G,10G,1G]": ["etp9a", "etp9b", "etp9c", "etp9d"]
}
},
"Ethernet72": {
"index": "10,10,10,10,10,10,10,10",
"lanes": "72,73,74,75,76,77,78,79",
"breakout_modes": {
"1x50G(1)": ["etp10"],
"1x100G(2)": ["etp10"],
"1x200G(4)": ["etp10"],
"1x100G[50G,40G,25G,10G,1G]": ["etp10"],
"2x100G[50G,40G,25G,10G,1G]": ["etp10a", "etp10b"],
"4x50G[25G,10G,1G]": ["etp10a", "etp10b", "etp10c", "etp10d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp10a", "etp10b"],
"4x100G[50G,25G,10G,1G]": ["etp10a", "etp10b", "etp10c", "etp10d"]
}
},
"Ethernet80": {
"index": "11,11,11,11,11,11,11,11",
"lanes": "80,81,82,83,84,85,86,87",
"breakout_modes": {
"1x50G(1)": ["etp11"],
"1x100G(2)": ["etp11"],
"1x200G(4)": ["etp11"],
"1x100G[50G,40G,25G,10G,1G]": ["etp11"],
"2x100G[50G,40G,25G,10G,1G]": ["etp11a", "etp11b"],
"4x50G[25G,10G,1G]": ["etp11a", "etp11b", "etp11c", "etp11d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp11a", "etp11b"],
"4x100G[50G,25G,10G,1G]": ["etp11a", "etp11b", "etp11c", "etp11d"]
}
},
"Ethernet88": {
"index": "12,12,12,12,12,12,12,12",
"lanes": "88,89,90,91,92,93,94,95",
"breakout_modes": {
"1x50G(1)": ["etp12"],
"1x100G(2)": ["etp12"],
"1x200G(4)": ["etp12"],
"1x100G[50G,40G,25G,10G,1G]": ["etp12"],
"2x100G[50G,40G,25G,10G,1G]": ["etp12a", "etp12b"],
"4x50G[25G,10G,1G]": ["etp12a", "etp12b", "etp12c", "etp12d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp12a", "etp12b"],
"4x100G[50G,25G,10G,1G]": ["etp12a", "etp12b", "etp12c", "etp12d"]
}
},
"Ethernet96": {
"index": "13,13,13,13,13,13,13,13",
"lanes": "96,97,98,99,100,101,102,103",
"breakout_modes": {
"1x50G(1)": ["etp13"],
"1x100G(2)": ["etp13"],
"1x200G(4)": ["etp13"],
"1x100G[50G,40G,25G,10G,1G]": ["etp13"],
"2x100G[50G,40G,25G,10G,1G]": ["etp13a", "etp13b"],
"4x50G[25G,10G,1G]": ["etp13a", "etp13b", "etp13c", "etp13d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp13a", "etp13b"],
"4x100G[50G,25G,10G,1G]": ["etp13a", "etp13b", "etp13c", "etp13d"]
}
},
"Ethernet104": {
"index": "14,14,14,14,14,14,14,14",
"lanes": "104,105,106,107,108,109,110,111",
"breakout_modes": {
"1x50G(1)": ["etp14"],
"1x100G(2)": ["etp14"],
"1x200G(4)": ["etp14"],
"1x100G[50G,40G,25G,10G,1G]": ["etp14"],
"2x100G[50G,40G,25G,10G,1G]": ["etp14a", "etp14b"],
"4x50G[25G,10G,1G]": ["etp14a", "etp14b", "etp14c", "etp14d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp14a", "etp14b"],
"4x100G[50G,25G,10G,1G]": ["etp14a", "etp14b", "etp14c", "etp14d"]
}
},
"Ethernet112": {
"index": "15,15,15,15,15,15,15,15",
"lanes": "112,113,114,115,116,117,118,119",
"breakout_modes": {
"1x50G(1)": ["etp15"],
"1x100G(2)": ["etp15"],
"1x200G(4)": ["etp15"],
"1x100G[50G,40G,25G,10G,1G]": ["etp15"],
"2x100G[50G,40G,25G,10G,1G]": ["etp15a", "etp15b"],
"4x50G[25G,10G,1G]": ["etp15a", "etp15b", "etp15c", "etp15d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp15a", "etp15b"],
"4x100G[50G,25G,10G,1G]": ["etp15a", "etp15b", "etp15c", "etp15d"]
}
},
"Ethernet120": {
"index": "16,16,16,16,16,16,16,16",
"lanes": "120,121,122,123,124,125,126,127",
"breakout_modes": {
"1x50G(1)": ["etp16"],
"1x100G(2)": ["etp16"],
"1x200G(4)": ["etp16"],
"1x100G[50G,40G,25G,10G,1G]": ["etp16"],
"2x100G[50G,40G,25G,10G,1G]": ["etp16a", "etp16b"],
"4x50G[25G,10G,1G]": ["etp16a", "etp16b", "etp16c", "etp16d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp16a", "etp16b"],
"4x100G[50G,25G,10G,1G]": ["etp16a", "etp16b", "etp16c", "etp16d"]
}
},
"Ethernet128": {
"index": "17,17,17,17,17,17,17,17",
"lanes": "128,129,130,131,132,133,134,135",
"breakout_modes": {
"1x50G(1)": ["etp17"],
"1x100G(2)": ["etp17"],
"1x200G(4)": ["etp17"],
"1x100G[50G,40G,25G,10G,1G]": ["etp17"],
"2x100G[50G,40G,25G,10G,1G]": ["etp17a", "etp17b"],
"4x50G[25G,10G,1G]": ["etp17a", "etp17b", "etp17c", "etp17d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp17a", "etp17b"],
"4x100G[50G,25G,10G,1G]": ["etp17a", "etp17b", "etp17c", "etp17d"]
}
},
"Ethernet136": {
"index": "18,18,18,18,18,18,18,18",
"lanes": "136,137,138,139,140,141,142,143",
"breakout_modes": {
"1x50G(1)": ["etp18"],
"1x100G(2)": ["etp18"],
"1x200G(4)": ["etp18"],
"1x100G[50G,40G,25G,10G,1G]": ["etp18"],
"2x100G[50G,40G,25G,10G,1G]": ["etp18a", "etp18b"],
"4x50G[25G,10G,1G]": ["etp18a", "etp18b", "etp18c", "etp18d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp18a", "etp18b"],
"4x100G[50G,25G,10G,1G]": ["etp18a", "etp18b", "etp18c", "etp18d"]
}
},
"Ethernet144": {
"index": "19,19,19,19,19,19,19,19",
"lanes": "144,145,146,147,148,149,150,151",
"breakout_modes": {
"1x50G(1)": ["etp19"],
"1x100G(2)": ["etp19"],
"1x200G(4)": ["etp19"],
"1x100G[50G,40G,25G,10G,1G]": ["etp19"],
"2x100G[50G,40G,25G,10G,1G]": ["etp19a", "etp19b"],
"4x50G[25G,10G,1G]": ["etp19a", "etp19b", "etp19c", "etp19d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp19a", "etp19b"],
"4x100G[50G,25G,10G,1G]": ["etp19a", "etp19b", "etp19c", "etp19d"]
}
},
"Ethernet152": {
"index": "20,20,20,20,20,20,20,20",
"lanes": "152,153,154,155,156,157,158,159",
"breakout_modes": {
"1x50G(1)": ["etp20"],
"1x100G(2)": ["etp20"],
"1x200G(4)": ["etp20"],
"1x100G[50G,40G,25G,10G,1G]": ["etp20"],
"2x100G[50G,40G,25G,10G,1G]": ["etp20a", "etp20b"],
"4x50G[25G,10G,1G]": ["etp20a", "etp20b", "etp20c", "etp20d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp20a", "etp20b"],
"4x100G[50G,25G,10G,1G]": ["etp20a", "etp20b", "etp20c", "etp20d"]
}
},
"Ethernet160": {
"index": "21,21,21,21,21,21,21,21",
"lanes": "160,161,162,163,164,165,166,167",
"breakout_modes": {
"1x50G(1)": ["etp21"],
"1x100G(2)": ["etp21"],
"1x200G(4)": ["etp21"],
"1x100G[50G,40G,25G,10G,1G]": ["etp21"],
"2x100G[50G,40G,25G,10G,1G]": ["etp21a", "etp21b"],
"4x50G[25G,10G,1G]": ["etp21a", "etp21b", "etp21c", "etp21d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp21a", "etp21b"],
"4x100G[50G,25G,10G,1G]": ["etp21a", "etp21b", "etp21c", "etp21d"]
}
},
"Ethernet168": {
"index": "22,22,22,22,22,22,22,22",
"lanes": "168,169,170,171,172,173,174,175",
"breakout_modes": {
"1x50G(1)": ["etp22"],
"1x100G(2)": ["etp22"],
"1x200G(4)": ["etp22"],
"1x100G[50G,40G,25G,10G,1G]": ["etp22"],
"2x100G[50G,40G,25G,10G,1G]": ["etp22a", "etp22b"],
"4x50G[25G,10G,1G]": ["etp22a", "etp22b", "etp22c", "etp22d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp22a", "etp22b"],
"4x100G[50G,25G,10G,1G]": ["etp22a", "etp22b", "etp22c", "etp22d"]
}
},
"Ethernet176": {
"index": "23,23,23,23,23,23,23,23",
"lanes": "176,177,178,179,180,181,182,183",
"breakout_modes": {
"1x50G(1)": ["etp23"],
"1x100G(2)": ["etp23"],
"1x200G(4)": ["etp23"],
"1x100G[50G,40G,25G,10G,1G]": ["etp23"],
"2x100G[50G,40G,25G,10G,1G]": ["etp23a", "etp23b"],
"4x50G[25G,10G,1G]": ["etp23a", "etp23b", "etp23c", "etp23d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp23a", "etp23b"],
"4x100G[50G,25G,10G,1G]": ["etp23a", "etp23b", "etp23c", "etp23d"]
}
},
"Ethernet184": {
"index": "24,24,24,24,24,24,24,24",
"lanes": "184,185,186,187,188,189,190,191",
"breakout_modes": {
"1x50G(1)": ["etp24"],
"1x100G(2)": ["etp24"],
"1x200G(4)": ["etp24"],
"1x100G[50G,40G,25G,10G,1G]": ["etp24"],
"2x100G[50G,40G,25G,10G,1G]": ["etp24a", "etp24b"],
"4x50G[25G,10G,1G]": ["etp24a", "etp24b", "etp24c", "etp24d"]
"2x200G[100G,50G,40G,25G,10G,1G]": ["etp24a", "etp24b"],
"4x100G[50G,25G,10G,1G]": ["etp24a", "etp24b", "etp24c", "etp24d"]
}
},
"Ethernet192": {

View File

@ -1,3 +1,4 @@
SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_4600.xml
SAI_DUMP_STORE_PATH=/var/log/mellanox/sdk-dumps
SAI_DUMP_STORE_AMOUNT=10
SAI_DUMP_MFT_CFG_PATH=/etc/mft/fwtrace_cfg

Some files were not shown because too many files have changed in this diff Show More