Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
Why I did it
advance sonic-platform-common submodule for 202211 branch
75d7664 - (HEAD, origin/202211) Use github code scanning instead of LGTM ([platform]: add port_config.ini for dell z9100 #328) (4 hours ago) [Liu Shilong]
How I did it
How to verify it
Why I did it
Currently sonic-slave-* tag is confusing. Set correct tag on sonic-slave-* image.
Fix job name to fit the build.
How I did it
build amd image in amd64:
sonic-slave-bullseye:cfe29bff67c
sonic-slave-bullseye:latest
sonic-slave-bullseye:master
build armhf image in amd64:
sonic-slave-bullseye-march-armhf:33614806dc3
sonic-slave-bullseye-march-armhf:latest
sonic-slave-bullseye-march-armhf:master
build arm64 image in amd64:
sonic-slave-bullseye-march-arm64:f3b1b16c801
sonic-slave-bullseye-march-arm64:latest
sonic-slave-bullseye-march-arm64:master
build arm64 image in arm64:
sonic-slave-bullseye:75cb326c9a7
sonic-slave-bullseye-arm64:latest
sonic-slave-bullseye:master
build armhf image in armhf:
sonic-slave-bullseye:64d178951fc
sonic-slave-bullseye-armhf:latest
sonic-slave-bullseye:master
How to verify it
Why I did it
In PR check pipelines, there are too many duplicated warnings:
fatal: No names found, cannot describe anything.
SONIC_IMAGE_VERSION will not change in one build. We don't need to calculate in every reference. We just need calculate one time, then record it.
In Makefile, '=' will calculate again and again when it is referred.
How I did it
Fix it in Makefile.
How to verify it
Check this PR's check pipeline result.
Why I did it
Makefile needs some dependencies from the Internet. It will fail for network related issue.
Retries will fix most of these issues.
How I did it
Add retries when running commands which maybe related with networking.
How to verify it
Why I did it
It is to fix the broadcom build failure, it is caused by the build image docker-dhcp-relay:latest not found.
2022-12-14T00:09:57.5464893Z [ FAIL LOG START ] [ target/docker-dhcp-relay.gz-load ]
2022-12-14T00:09:57.5466036Z Attempting docker image lock for docker-dhcp-relay load
2022-12-14T00:09:57.5467113Z Obtained docker image lock for docker-dhcp-relay load
2022-12-14T00:09:57.5468206Z Loading docker image target/docker-dhcp-relay.gz
2022-12-14T00:09:57.5469361Z Loaded image: docker-dhcp-relay:internal.65852159-11ad82a07a
2022-12-14T00:09:57.5470686Z Tagging docker image docker-dhcp-relay:latest as docker-dhcp-relay-sonic:latest
2022-12-14T00:09:57.5471997Z Error response from daemon: No such image: docker-dhcp-relay:latest
2022-12-14T00:09:57.5473122Z [ FAIL LOG END ] [ target/docker-dhcp-relay.gz-load ]
2022-12-14T00:09:57.5539792Z make: *** [slave.mk:1180: target/docker-dhcp-relay.gz-load] Error 1
2022-12-14T00:09:57.5540958Z make: *** Waiting for unfinished jobs....
The image had been built succeeded
2022-12-13T17:01:59.9046935Z [ finished ] [ target/docker-eventd.gz ]
2022-12-13T17:02:00.4947165Z [ building ] [ target/docker-dhcp-relay.gz ]
2022-12-13T17:02:00.6688627Z /sonic/dockers/docker-dhcp-relay/cli-plugin-tests /sonic
2022-12-13T17:02:41.1123955Z /sonic
2022-12-13T17:07:04.1786069Z [ finished ] [ target/docker-dhcp-relay.gz ]
But it was tagged by another value:
Obtained docker image lock for docker-dhcp-relay save
Tagging docker image docker-dhcp-relay-sonic:latest as docker-dhcp-relay:internal.65852159-11ad82a07a
Saving docker image docker-dhcp-relay:internal.65852159-11ad82a07a
Released docker image lock for docker-dhcp-relay save
Removing docker image docker-dhcp-relay-sonic:latest
Untagged: docker-dhcp-relay-sonic:latest
target/docker-dhcp-relay.gz
File /dpkg_cache/docker-dhcp-relay.gz-2ddfa01a109ca69b7621f1a-450bae36026d9dee62646f2.tgz saved in cache
[ CACHE::SAVED ] /dpkg_cache/docker-dhcp-relay.gz-2ddfa01a109ca69b7621f1a-450bae36026d9dee62646f2.tgz
How I did it
When the feature SONIC_CONFIG_USE_NATIVE_DOCKERD_FOR_BUILD not enabled, always save as the latest tag, not use the specify version.
The version is dynamic, it is changed when a new commit checked in, but the image of docker-dhcp-relay is not necessary to change.
PR #12829 modified the docker tagging scheme such that optional docker
containers would be tagged with the SONiC image version. However, the
docker-image-load macro wasn't updated for these changes. Update it
here.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Fixes: #11521
- Why I did it
When build SONiC dockers, SONiC build system tags all of them with latest tag. This is Ok for all built-in dockers because we will also tag them with image version tag in sonic_debian_extension.j2 script. On the other hand, some of these dockers are SONiC packages and they are installed by sonic-package-manager which creates a only one tag whcih is recorded in the corresponding .gz file. This leads to having these dockers tagged only with latest tag. This change saves the tag as an image version string in .gz file, so that these dockers have version identification in their tag.
- How I did it
I modified slave.mk to save the version tag instead of latest tag.
- How to verify it
I verified this change by running show version
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
There is an issue on the Arista PikeZ platform (using T3.X2: BCM56274) while running SONiC. If the 'syncd' container in SONiC is restarted, the expected behaviour is that syncd will automatically restart/recover; however it does not and always fails at create_switch due to BCM SDK kmod DMA operation cancellation getting stuck.
Sep 16 22:19:44.855125 pkz208 ERR syncd#syncd: [none] SAI_API_SWITCH:platform_process_command:428 Platform command "init soc" failed, rc = -1. Sep 16 22:19:44.855206 pkz208 INFO syncd#supervisord: syncd CMIC_CMC0_PKTDMA_CH4_DESC_COUNT_REQ:0x33#015 Sep 16 22:19:44.855264 pkz208 CRIT syncd#syncd: [none] SAI_API_SWITCH:platformInit:1909 initialization command "init soc" failed, rc = -1 (Internal error). Sep 16 22:19:44.855403 pkz208 CRIT syncd#syncd: [none] SAI_API_SWITCH:sai_driver_init:642 Error initializing driver, rc = -1. ... Sep 16 22:19:44.855891 pkz208 CRIT syncd#syncd: [none] SAI_API_SWITCH:brcm_sai_create_switch:1173 initializing SDK failed with error Operation failed (0xfffffff5).
Reloading the BCM SDK kmods allows the switch init to continue properly.
How I did it
If BCM SDK kmods are loaded, unload and load them again on syncd docker start script.
How to verify it
Steps to reproduce:
In SONiC, run 'docker ps' to see current running containers; 'syncd' should be present.
Run 'docker stop syncd'
Wait ~1 minute.
Run 'docker ps' to see that syncd is missing.
Check logs to see messages similar to the above.
Signed-off-by: Michael Li <michael.li@broadcom.com>
#### Why I did it
`os` and `commands` modules are not secure against maliciously constructed input
`getstatusoutput` is detected without a static string, uses `shell=True`
#### How I did it
Eliminate the use of `os` and `commands`
Use `subprocess` instead
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
ECN parameters need to be updated for storage backend
How I did it
Included the check for storage backend devices to update qos configs
How to verify it
Verified that the new ecn settings are applied on storage backend device.
Verified that the old ecn settings are applied for storage frontend, non storage frontend/backend devices
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
The [xml.etree.ElementTree](https://docs.python.org/3/library/xml.etree.elementtree.html#module-xml.etree.ElementTree) module is not secure against maliciously constructed data.
`os` - not secure against maliciously constructed input and dangerous if used to evaluate dynamic content
`subprocess.getstatusoutput` is dangerous because include shell=True in the implementation
#### How I did it
Remove xml. Use [lxml](https://pypi.org/project/lxml/) XML parsers package that prevent potentially malicious operation.
Replace `os` by `subprocess`
Use command as an array instead of string
Use `getstatusoutput_noshell` in `sonic_py_common` lib
- Why I did it
Change YANG model to support syslog rate limit configuration feature
- How I did it
modified sonic-syslog.yang and sonic-feature.yang to support the new added configuration schema
- How to verify it
Unit test
- Why I did it
Add support for compiling Spectrum-4 ASIC firmware to the SONiC image
Add support for Spectrum-4 ASIC firmware upgrade
- How I did it
Update Mellanox fw make files to include Spectrum-4 ASIC firmware binaries.
Update firmware upgrade scripts to be able to detect Spectrum-4 ASIC.
- How to verify it
Run regression tests
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Provide GNMI native write interface for configuration.
How I did it
Add configuration parameters for GNMI native write.
How to verify it
Check build pipeline.
Why I did it
Submodule update for sonic-gnmi
Incorporates:
8226e46 Upgrade pipeline to use bullseye. (sonic-net/sonic-gnmi#58)
ae72767 Add gnmi_dump tool for debug and unit test (sonic-net/sonic-gnmi#60)
6b0253a Add conditional check for split (sonic-net/sonic-gnmi#55)
99bfa8f Remove LOGLEVEL DB since is no longer used (sonic-net/sonic-gnmi#56)
54806a8 Support new gnmi config interface in telemetry container. (sonic-net/sonic-gnmi#7)
How I did it
Move submodule
How to verify it
Check build pipeline.
Why I did it
Added to allow test_crm_route to pass; the test tries to add a /126 ipv6 route and this change is required in order for the count of available routes to be updated correctly.
Why I did it
Submodule update for sonic-swss-common
Incorporates:
5d481da Install swsscommon.i with libswsscommon-dev (#717)
How I did it
I have updated sonic-swss-common repo, this PR is used to update submodule.
How to verify it
Build image, install libswsscommon-dev, and check /usr/share/swss.
- Why I did it
Upgrade the app-extension developer environments (sonic-sdk & sonic-sdk-bullseye) to bullseye
- How to verify it
Built an app-extension using these images and verified if it is up and running.
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
- Why I did it
Add SDK hash calculator Debian and update SDK makefile to compile it.
- How I did it
SDK hash calculator Debian will be used by ECMP calculator (PR #12482)
- How to verify it
Compile sonic-buildimage and verify SDK hash calculator Debian exist in target folder.
* [sonic-platform-daemons] submodule update
git log --oneline 7c0a326..master
e8c5657 (HEAD -> master, origin/master, origin/HEAD) [ycabled] fix
exception-handling logic for ycabled (#306)
905874d [ycabled] move swsscommon API's from subroutines to call them
exactly once per task_worker/thread (#303)
510d330 Fix typo in xcvrd (#313)
9ae551f [ycabled] add support for detach mode in 'active-active'
topology (#309)
82fc7a6 Added filtering logic to send filtered fields from DB event
(#307)
8a2dad9 [ycabled] fix no port/state returned by grpc server (#308)
4ea12cf Fix xcvrd to support 400G ZR optic (#293)
23b6970 [ycabled] fix naming error for error condition for CLI handling
(#302)
501abb2 [ycabled] add some exception catching logic to some vendor
specific API's (#301)
534f839 [ycabled] add support for getting grpc secerts via shared file
(#298)
3622aac Remove shell=True (#300)
143422b add support to execute new ycable API's, add datetime field to
mux_info (#297)
6522c46 [ycabled] add notification for gRPC connection state transitions
to IDLE/TRANSIENT_FAILURE (#295)
4b3b238 Install libyang to azure pipeline (#292)
8ff5f37 Use get() to fetch default value from dictionary for port
admin_status #286
b03cc74 [Xcvrd] Soak duplicate events and process only updated
interested events (#285)
3acb171 [ycable] cleanup logic for creating grpc future ready (#289)
ce3b6db [ycabled] fix insert events from xcvrd;cleanup some mux toggle
logic (#287)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
sonic-swss-common needs to support SWIG wrapper for go.
Submodule update for sonic-swss-common
Incorporates:
d63130c [[CI]Install libyang from common-lib when build bullseye (#710)
bfe123e Add decorator for Yang default value. (#713)
1d66080 Use SWIGPYTHON to improve SWIG for GO wrapper. (#714)
How I did it
I have updated sonic-swss-common repo, this PR is used to update submodule.
How to verify it
Build image, and sonic-gnmi pipeline will verify SWIG wrapper.
#### Why I did it
When build the sonic-slave-bash target, it cannot go to the shell failed in the step to build sonic-build-hooks, the error logs as below. It may have impact on some of the users, it may be relative to different version of the make.
```
$ QUIET=n BLDENV=bullseye make NOJESSIE=1 NOSTRETCH=1 sonic-slave-bash
+++ Making sonic-slave-bash +++
BLDENV=buster make -f Makefile.work sonic-slave-bash
make[1]: Entering directory `/builds2/stephens/wip/update-submodule/sonic-buildimage'
echo -n ""
pushd src/sonic-build-hooks; TRUSTED_GPG_URLS=https://packages.trafficmanager.net/debian/public_key.gpg,https://packages.microsoft.com/keys/microsoft.asc make all; popd
/builds2/stephens/wip/update-submodule/sonic-buildimage/src/sonic-build-hooks /builds2/stephens/wip/update-submodule/sonic-buildimage
make[2]: Entering directory `/builds2/stephens/wip/update-submodule/sonic-buildimage/src/sonic-build-hooks'
dpkg-deb: building package 'sonic-build-hooks' in 'buildinfo/sonic-build-hooks_1.0_all.deb'.
make[2]: Leaving directory `/builds2/stephens/wip/update-submodule/sonic-buildimage/src/sonic-build-hooks'
/builds2/stephens/wip/update-submodule/sonic-buildimage
mkdir -p sonic-slave-buster/buildinfo
cp src/sonic-build-hooks/buildinfo/sonic-build-hooks* sonic-slave-buster/buildinfo
[ "n" == y ] && scripts/build_mirror_config.sh sonic-slave-buster amd64 buster
make[1]: *** [sonic-build-hooks] Error 1
make[1]: Leaving directory `/builds2/stephens/wip/update-submodule/sonic-buildimage'
make: *** [sonic-slave-bash] Error 2
```
#### How I did it
Change the format as below:
```
[ xxx = yyy ] && do something
```
To
```
if [ xxx = yyy ]; then do something; if
```
#### How to verify it
Verified by who found the issue, the issue gone when the patch applied.
* Update submodule sonic-utilities
72b9cf9 [psushow & psuutil] Support PSU power threshold checking (#2326)
dfdc92e Revert "Support the bandit check by GitHub Action (#2358)" (#2509)
85638b2 YANG Validation for ConfigDB Updates: DEVICE_METADATA, SNMP, SNMP_COMMUNITY tables (#2481)
da44d71 YANG Validation for ConfigDB Updates: PORT_STORM_CONTROL, PORT_QOS_MAP, BUFFER_PROFILE, BUFFER_PG, BUFFER_QUEUE, BUFFER_POOL, FEATURE, DEFAULT_LOSSLESS_BUFFER_PARAMETER tables (#
ba9b628 [sfp] Fix issue: Application Advertisement is not well formatted (#2491)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Update submodule sonic-platform-daemons
ed818f8 [PSU daemon] Support PSU power threshold checking (#288)
707a720 [chassisd] update chassisd to write fabric and lc asics on sep erate table (#311)
e8c5657 [ycabled] fix exception-handling logic for ycabled (#306)
905874d [ycabled] move swsscommon API's from subroutines to call them exactly once per task_worker/thread (#303)
510d330 Fix typo in xcvrd (#313)
9ae551f [ycabled] add support for detach mode in 'active-active' topology (#309)
82fc7a6 Added filtering logic to send filtered fields from DB event (#307)
8a2dad9 [ycabled] fix no port/state returned by grpc server (#308)
4ea12cf Fix xcvrd to support 400G ZR optic (#293)
23b6970 [ycabled] fix naming error for error condition for CLI handling (#302)
501abb2 [ycabled] add some exception catching logic to some vendor specific API's (#301)
534f839 [ycabled] add support for getting grpc secerts via shared file (#298)
3622aac Remove shell=True (#300)
143422b add support to execute new ycable API's, add datetime field to mux_info (#297)
6522c46 [ycabled] add notification for gRPC connection state transitions to IDLE/TRANSIENT_FAILURE (#295)
4b3b238 Install libyang to azure pipeline (#292)
8ff5f37 Use get() to fetch default value from dictionary for port admin_status #286
b03cc74 [Xcvrd] Soak duplicate events and process only updated interested events (#285)
3acb171 [ycable] cleanup logic for creating grpc future ready (#289)
ce3b6db [ycabled] fix insert events from xcvrd;cleanup some mux toggle logic (#287)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Update submodule sonic-platform-common
7c48be2 Add warning/critical thresholds for PSU power (#304)
f5ba0d0 Add missing PM and VDM related EEPROM read (#326)
02dd597 implement CMIS set_laser_freq to support 100GHz grid space (#294)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Revert "Update submodule sonic-platform-daemons"
This reverts commit aea648b157.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
