Why I did it
Enable build cache for marvell-arm64 build to decrease PR check duration.
Work item tracking
Microsoft ADO (number only): 26340500
How I did it
How to verify it
These changes, in conjunction with NDK version >= 22.9.17 address the thermal logging issues discussed at Nokia-ION/ndk#27. While the changes contained at this PR do not require coupling to NDK version >= 22.9.17, thermal logging enhancements will not be available without updated NDK >= 22.9.17. Thus, coupling with NDK >=22.9.17 is preferred and recommended.
Why I did it
To address thermal logging deficiencies.
Work item tracking
Microsoft ADO (number only): 26365734
How I did it
The following changes are included:
Threshold configuration values are provided in the associated device data .json files. There is also a change included to better handle the condition where an SFP module read fails.
Modify the module.py reboot to support reboot linecard from Supervisor
- Modify reboot to call _reboot_imm for single IMM card reboot
- Add log to the ndk_cmd to log the operation of "reboot-linecard" and "shutdown/satrtup the sfm"
Add new nokia_cmd set command and modify show ndk-status output
- Add a new function reboot_imm() to nokia_common.py to support reboot a single IMM slot from CPM
- Added new command: nokia_cmd set reboot-linecard <slot> [forece] for CPM
- Append a new column "RebootStatus" at the end of output of "nokia_cmd show ndk-status"
- Provide ability for IMM to disable all transceiver module TX at reboot time
- Remove defunct xcvr-resync service
- Why I did it
1. Thermal updater should wait more time for module to be initialized
2. sfp should get temperature threshold from EEPROM because SDK sysfs is not yet supported
3. Rename sfp function to fix typo
4. sfp.get_presence should return False if module is under initialization
- How I did it
1. Thermal updater should wait more time for module to be initialized
2. sfp should get temperature threshold from EEPROM because SDK sysfs is not yet supported
3. Rename sfp function to fix typo
4. sfp.get_presence should return False if module is under initialization
- How to verify it
Manual test
Unit test
- Why I did it
watchdog-control service always disarm watchdog during system startup stage. It could be the case that watchdog is not fully initialized while the watchdog-control service is accessing it. This PR adds a wait to make sure watchdog has been fully initialized.
- How I did it
adds a wait to make sure watchdog has been fully initialized.
- How to verify it
Manual test
sonic regression
- Why I did it
For CMIS host management module, we need a different implementation for sfp.reset. This PR is to implement it
- How I did it
For SW control modules, do reset from hw_reset
For FW control modules, do reset as the original way
- How to verify it
Manual test
sonic-mgmt platform test
- Why I did it
New implementation of Nvidia platform_wait due to:
1. sysfs deprecated by hw-mgmt
2. new dependencies to SDK
3. For CMIS host management mode
- How I did it
wait hw-management ready
wait SDK sysfs nodes ready
- How to verify it
manual test
unit test
sonic-mgmt regression
- Why I did it
Fix issue xcvrd crashes due to cannot import name 'initialize_sfp_thermal':
Nov 27 09:47:16.388639 sonic ERR pmon#xcvrd: Exception occured at CmisManagerTask thread due to ImportError("cannot import name 'initialize_sfp_thermal' from partially initialized module 'sonic_platform.thermal' (most likely due to a circular import) (/usr/local/lib/python3.9/dist-packages/sonic_platform/thermal.py)")
- How I did it
Add lock for creating SFP object
- How to verify it
Unit test
Manual Test
- Why I did it
When module is totally under software control, driver cannot get module temperature/temperature threshold from firmware. In this case, sonic needs to get temperature/temperature threshold from EEPROM. In this PR, a thread thermal updater is created to update module temperature/temperature threshold while software control is enabled.
- How I did it
Query ASIC temperature from SDK sysfs and update hw-management-tc periodically
Query Module temperature from EEPROM and update hw-management-tc periodically
- How to verify it
Manual test
New Unit tests
- Why I did it
When module is under software control (CMIS host management enabled), EEPROM should be controlled by software and there should be no limitation for any write operation.
- How I did it
Remove EEPROM write limitation if a module is under software control
- How to verify it
Manual test
UT
- Why I did it
Update SAI version to SAIBuild2311.26.0.28
Fixed issues
1. Traffic with unicast destination ip and multicast destination mac wasn't properly dropped
2. When working with SAI_DEFAULT_SWITCHING_MODE_STORE_FORWARD key/value enabled, trying to add a LAG member to a LAG which is created after warm boot initial configuration phase ended, will fail.
3. Optional feature of Port IP counters (SAI_PORT_STAT_IP*) , enabled by SAI XML per-port-ip-counter-enabled config node, wasn't initialized properly.
4. Creating BFD session for non default VRF fails (SAI_BFD_SESSION_ATTR_VIRTUAL_ROUTER != SAI_SWITCH_ATTR_DEFAULT_VIRTUAL_ROUTER_ID).
5. The default value for port FEC during switch init for Spectrum3 was initialized as 'auto' and not aligned to SAI header default 'none'. Note if setups has invalid configuration and relied previously on auto, now it might be necessary for the user to provide explicit valid value for SAI_PORT_ATTR_FEC_MODE
Update SDK/FW version to 4.6.2134/2012.2134
Fixed issues:
1. Updated SN3700C to enable limit to 100G speed.
2. Recovering from Low power mode might ends with port down.
- How I did it
Updating the versions in makefile
- How to verify it
Confirm issues fixed and run sonic-mgmt tests
- Why I did it
For cmis host management mode, the prevous sysfs cannot be used for low power mode setting. This PR reuses existing low power mode implementation in sonic_xcvr package when CMIS host management mode is enabled
- How I did it
Use sonic_xcvr low power mode implementation when CMIS host management mode is enabled.
- How to verify it
Manual test for CMIS host management mode
Regression test for old mode and backward compatible test
A W/A to overcome delay of about 20 sec on login due to MFT bash autocompletion bug.
Should be reverted once a formal solution will be available in future MFT release.
- Why I did it
To overcome SN2700 20 sec delay on login
- How I did it
Removed MFT bash autocompletion part
- How to verify it
1. Build a mellanox image
2. Verify no such links after system boot.
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
FCS/CRC Errors will only be reported as RX_ERR.
Fix to avoid the mac port related errors.
Fix for sharedResSize testcase failure in QoS-SAI
Fix the issue related to voltage in 'show platform psustatus'.
Support WRED drop for lossy queues.
Fixed an issue where lossy traffic was getting dropped.
Enhancement of SAI logging for errors and interrupts
To modify EEPROM API serial_number_str to return service tag instead of serial number in Dell S6100.
Ref PR: #1239
How I did it
Update EEPROM API serial_number_str to return service tag instead of serial number.
How to verify it
Verify decode-syseeprom -s returns service tag in Dell S6100.
Why I did it
1. Upgrade centec-arm64 platform to Bookworm.
2. Solve the problem of compiling the docker-syncd-centec-rpc.gz error on the centec platform.
How I did it
1. Modified platform driver to comply with bookworm kernel.
2. Upgrade SONiC package versions of the centec platform.
How to verify it
1. Compile the centec-arm64 platform to generate sonic-centec-arm64.bin.
2. Compile the centec platform to generate docker-syncd-centec-rpc.gz.
Signed-off-by: centecqianj <qianj@centec.com>
- Why I did it
Enable CMIS host management for Mellanox devices which are expected to support the feature
- How I did it
new thread in a new file and changing logic in platform code in chassis.py which is calling this thread from get_change_event()
this thread in the new file handles the state machine per port.
first the static detection takes place once the thread is up (during switch bootup sequence), until final decision if it's FW control or SW control module.
After it ends, the dynamic detection takes place, listening to changes in the sysfs fds, per port,
so it will be able to detect plug in or out events of a cable.
- How to verify it
Enhanced unit tests
run sonic mgmt on Nvidia SN4700 with CMIS host management enabled
Signed-off-by: Nazarii Hnydyn nazariig@nvidia.comCloses#17345
This W/A was proposed by Nvidia FRR team before the long term solution is ready.
Why I did it
A W/A to fix default route installation during LAG member flap
Work item tracking
N/A
How I did it
Disabled FRR next hop group support
How to verify it
Do LAG member flap
- Why I did it
Provide a dummy implementation for SFP error description when CMIS host management is enabled. A future feature shall be raised to implement SFP error description for such mode.
- How I did it
if SFP is under software control, provide "Not supported" as error description
if SFP is under initialization, provide "Initializing" as error description
- How to verify it
unit test
This commit adds support for pensando asic called ELBA. ELBA is used in pci based cards and in smartswitches.
#### Why I did it
This commit introduces pensando platform which is based on ELBA ASIC.
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Created platform/pensando folder and created makefiles specific to pensando.
This mainly creates pensando docker (which OEM's need to download before building an image) which has all the userspace to initialize and use the DPU (ELBA ASIC).
Output of the build process creates two images which can be used from ONIE and goldfw.
Recommendation is use to use ONIE.
#### How to verify it
Load the SONiC image via ONIE or goldfw and make sure the interfaces are UP.
##### Description for the changelog
Add pensando platform support.
How I did it
Modified platform driver to comply with bookworm kernel.
Modified python build commands for building whl packages.
How to verify it
Verify whether all the platform bookworm debs are built.
make target/debs/bookworm/platform-modules-v682-48y8c-d_1.0_amd64.deb
Load the platform debian into the device and install it in bookworm image.
Verify the platform related CLI and the functionality
Signed-off-by: centecqianj <qianj@centec.com>
- Why I did it
The current low power mode setting implementation requests the user to set the port to admin down first before toggling LP mode, this is not backward compatible, now revert it to the old way so that the user can toggle the LP mode regardless of the port admin status.
- How I did it
Revert the recent changes related to LPM in PR #14130 and #16545
- How to verify it
Run all sfputil and SFP platform API related tests on all the Mellanox platforms.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
[Bookworm] Update platform-modules-dell for Bookworm #16735
How I did it
Modified platform driver to comply with bookworm kernel.
Removed MODULE_SUPPORTED_DEVICE wherever used.
Modified python build commands for building whl packages.
How to verify it
Verify whether all the platform bookworm debs are built.
make target/debs/bookworm/platform-modules-z9100_1.1_amd64.deb
Load the platform debian into the device and install it in bookworm image.
Verify the platform related CLI and the functionality
Why I did it
Update SDK/SAI and FW for Mellanox Platform
How I did it
Update SDK/FW to v4.6.2104/v2012.2104
Fixed Issues:
Some of the Warmboot related files which were created by SDK during switch create are now generated during pre shutdown flow
New Features:
Debian 12 and kernel 6.1 support
Update SAI
New Features:
Auto Fec Support
FDB entries are now restored after warmboot to prevent temporary system flooding.
Minor Enhancement and Bug Fix in integrate-mlnx-sdk
How to verify it
Build Image and run tests
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Why I did it
Add platform support for Debian 12 (Bookworm) on Mellanox Platform
How I did it
Update hw-management to v7.0030.2008
Deprecate the sfp_count == module_count approach in favour of asic init completion
Ref: Mellanox/hw-mgmt@bf4f593
Add xxd package to base image which is required by hw-management scripts
Add the non-upstream flag into linux kernel cache options
Update the thermalctl logic based on new sysfs attributes
Fix the integrate-mlnx-hw-mgmt script to not populate the arm64 Kconfig
How to verify it
Build kernel and run platform tests
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
Co-authored-by: Junchao-Mellanox <junchao@nvidia.com>
Co-authored-by: Junchao-Mellanox <57339448+Junchao-Mellanox@users.noreply.github.com>
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
[Nvidia] Enable iproute2 & fix mft build (#16)
* Enable iproute2 as the SDK is also built
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
* [Nvidia] Dont use mkbmdeb method of dkms to build the package
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
* Added linux image to the Depends section of mft
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
[Nvidia] [Bookworm] Separate KERNEL_MFT into a new target (#16782)
* [Nvidia] Seperate KERNEL_MFT into a new target because of kernel header dependency
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
* Update linux-kernel submodule
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
* Fix paralell build problem
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
---------
Signed-off-by: Vivek Reddy <vkarri@nvidia.com>
* sonic-platform-modules-cel: broadcom: adapt for kernel 6.1 and bookworm
The i2c_driver->remove API declaration has been updated to return void instead
of int, as part of cleanup patches in 6.1. More details can be referred from
here: [1]. Update the remove API definition in the modules accordingly and
cleanup variables that go unused from the remove API.
Update python build commands for bookworm. The packaging based on calling
setup.py is deprecated and using build module/pip utility is the recommended
method for python packaging/installation. Further details can be referred to
from here: [2], [3]. The build module is picky about the package information file,
which needs to be either setup.py or pyproject.toml.
Additionally, fix formatting inconsistencies in debian/changelog reported by
`dh_installchangelogs` during the build.
Tested the changes by compiling the changes as below:
make sonic-slave-bash NOBUSTER=1 NOBULLSEYE=1
sudo dpkg -i target/debs/bookworm/linux-headers-6.1.0-11-2-*.deb
cd platform/broadcom/sonic-platform-modules-cel
KVERSION=6.1.0-11-2-amd64 dpkg-buildpackage
Also verified the python scripts under the sonic-platform-modules-cel with
pyflakes to ensure no new errors are flagged (with exception of unused modules).
References:
[1] - https://github.com/torvalds/linux/commit/ed5c2f5f
[2] - https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.htm
[3] - 0b20a4863 (Update Python build commands for Bookworm, 2023-09-07)
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
* platform/pddf: i2c: adapt for kernel 6.1 and bookworm
* Fixup i2c_driver->remove API due to changes in the function
prototype (ref: [1]).
* Cleanup `MODULE_SUPPORTED_DEVICE` macros that were cleaned up in
the upstream (ref: [2]).
* Sanitize python packaging and installation using the `build` module
instead of calling the setup.py directly (ref: [3]. [4]).
Tested the changes by compiling pddf module as below:
make sonic-slave-bash NOBUSTER=1 NOBULLSEYE=1
sudo dpkg -i target/debs/bookworm/linux-headers-6.1.0-11-2-*.deb
cd platform/pddf/i2c
KVERSION=6.1.0-11-2-amd64 dpkg-buildpackage
References:
[1] - https://github.com/torvalds/linux/commit/ed5c2f5f
[2] - https://github.com/torvalds/linux/commit/6417f031
[2] - https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.htm
[3] - 0b20a4863 (Update Python build commands for Bookworm, 2023-09-07)
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
* platform/broadcom: include platform-modules-cel in builds
With pddf modules patched for 6.1, platform-modules-cel can be compiled
and included in the final image.
Testing by building sonic-broadcom.bin/sonic-broadcom-dnx.bin.
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
* pddf/i2c: revert correct rootdir for pip install
The pip install directory has been set to test-pkg1/ for testing the build and
incorrectly retained as is. Revert this to the correct path $(PACKAGE_PRE_NAME).
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
* platform/broadcom: include pddf/modules-cel in the base package
Without this change, the modules were built but not packaged in the final .bin.
The final sonic-broadcom.bin has been tested for bootup on Celestica's
Silverstone platform.
admin@sonic:~$ uname -a
Linux sonic 6.1.0-11-2-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.38-4 (2023-08-08) x86_64 GNU/Linux
admin@sonic:~$ show platform summary
Platform: x86_64-cel_silverstone-r0
HwSKU: Silverstone
ASIC: broadcom
ASIC Count: 1
Serial Number: R4009B2F062504LK200024
Model Number: N/A
Hardware Revision: N/A
admin@sonic:~$ show version | head
SONiC Software Version: SONiC.g0aad6c67c-rachandr
SONiC OS Version: 12
Distribution: Debian 12.2
Kernel: 6.1.0-11-2-amd64
Build commit: 0aad6c67c
Build date: Thu Oct 26 07:13:47 UTC 2023
Built by: rachandr@AZUHPS14
Platform: x86_64-cel_silverstone-r0
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
---------
Signed-off-by: Ramasamy Chandramouli <rachandr@celestica.com>
* [Marvell-arm64] Add platform support for rd98DX35xx
This change adds following two variants of rd98DX35xx board to arm64
build.
Board with CPU integrated into the 98DX35xx switching chip:
Platform: arm64-marvell_rd98DX35xx-r0
HwSKU: rd98DX35xx
ASIC: marvell
Port Config: 32x1G + 16x2.5G + 6x25G
Board with external CN9131 CPU connected over PCI to 98DX35xx
switching chip:
Platform: arm64-marvell_rd98DX35xx_cn9131-r0
HwSKU: rd98DX35xx_cn9131
ASIC: marvell
Port Config: 32x1G + 16x2.5G + 6x25G
Change-Id: I21dc9fe972417daaabb20a5bddf7779d72b7972e
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
* Add HWSKU for rd98DX35xx and rd98DX35xx_cn9131
This patch adds new HWSKU's for Marvell arm64 platforms rd98DX35xx
and rd98DX35xx_cn9131.
Change-Id: Id7c14f49f0e304335cc4ca73dcae52362c49d231
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
---------
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
- Why I did it
Support running hw-management service on MSN4700 emulation platform.
- How I did it
Use physical EEPROM instead of the fake one
Do not skip PSUd, PCId, thermal control daemon
Adjust PCIe and thermal configuration files
Adjust platform.json for different chassis names and thermals
Remove a patch to hw-management in order to enable it
- How to verify it
Run Nvidia simulation on SN4700 (ASIC and Platform)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
In order to activate FW after it was upgraded need to perform reboot.
If reboot wasn't performed and user need to upgrade to another SONiC image then it will fail.
The reason for that is that during SONiC upgrade new FW should be installed but it will fail because previously installed FW wasn't activated.
In order to allow 2nd FW upgrade without reboot in-between need to reactivate FW image.
This change handles such flow.
Example of issue scenario:
User installed SONiC image on the switch
Then for some reason FW was upgraded by user or script but reboot was not performed to activate it.
After that upgrade to new SONiC image will fail because new image need to install FW but it fails due to previous one wasn't activated.
- How I did it
In "mlnx-fw-upgrade" script check if FW upgrade failed with the error that FW was already installed but reboot was not performed.
If so then perform FW image reactivation and try to upgrade FW again.
- How to verify it
Install SONiC image on the switch
Then upgrade FW but don't perform reboot.
After that upgrade to new SONiC image and check that upgrade was successfull.
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Why I did it
- Convert hw-dump into generate-dump plugins
- Enable DRAM scrubber on some products
- Fix xcvr driver active low register bit logic
- Improve cooling algorithm (now considers xcvrs and modules)
- Add linecard graceful shutdown (disabled by default)
The scrubber was enabled for the following products:
- DCS-7050QX-32S
- DCS-7050CX3-32S
- DCS-7060CX-32S
This is CSP CS00012280996.
The issue to fix is that the checksum was incorrect for all TCP packets leaving the system so that the BGP connection cannot be established. We found the issue on BCM56993, and it is possible to affect all platforms using linux_ngknet.
Why I did it
XGS saibcm-modules 8.4 is needed. #14471
Work item tracking
Microsoft ADO (number only): 24917414
How I did it
Copy files from xgs SDK 8.4 repo and modify makefiles to build the image.
Upgrade version to 8.4.0.2 in saibcm-modules.mk.
How to verify it
Build a private image and run full qualification with it: https://elastictest.org/scheduler/testplan/650419cb71f60aa92c456a2b
Why I did it
In an effort to allow people to build a slim version of SONiC to fit on devices to small storage, there is a need to disable some unneeded features.
The docker-gbsyncd are only applicable to devices with external gearboxes and might not apply to devices that need a small image.
It is therefore desirable to have a knob to not include these gbsyncd containers.
Work item tracking
Microsoft ADO (number only):
How I did it
Add a new config INCLUDE_GBSYNCD which is enabled by default to retain the previous behavior.
Setting it to n will not include the platform/components/docker-gbsyncd-*.mk.
How to verify it
Set INCLUDE_GBSYNCD = n and witness that docker-gbsyncd images are not present in the final image.
- Why I did it
Add an ability to add arm64 mellanox specific kconfig using the integration tool
Fix the existing duplicate kconfig problem by using the vanilla .config
Add an ability to patch kconfig-inclusions file. Renamed series.patch to external-changes.patch to reflect the behavior
NOTE: Min hw-mgmt version to use with these changes: V.7.0030.2000 not yet upstream but required prio to it.
This option will be enabled one the new hw mgmt will be upstream.
Depends on sonic-net/sonic-linux-kernel#336
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Added Marvell SAI-1.13.0 debian support for x86_64 platform.
Work item tracking
Microsoft ADO (number only):
How I did it
compile marvel libsai.so (with SAI headers from version 1.13.0) and package it with version 1.13.0-1
How to verify it
Updated sdk & driver requries hugepage to be reserved during kernel
boot. These kernel command line agrument are passed from installer.conf
in device folder.
Change-Id: Id43f61af2b050500775da66d058c2de78cb5ad15
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
This patch adds support for lazy install of Marvell prestera SDK
drivers for platform-nokia. Lazy install for drivers is added as
updated sdk driver needs to classify the drivers required for platform
during compile time. SDK drivers and platform files are now fetched
from a submodule(mrvl-prestera).
Additionaly, DTB required for sonic_fit creation during compile time
is sourced from sonic-linux-kernel.
Change-Id: Id5b011e6bd67accf7b1579d91cb7affad464e916
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
