Management port currently broken for Edgecore AS4630-54PE platform due to NIC hardware numbering.
Created new PR with typo from Edgecore in original PR fixed. Here is a link to the old PR that has broken logic:
#9560
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
* platform/pddf/README.md: Fix typo in *development*
* platform/pddf/README.md: Remove trailing space
* platform/pddf/README.md: Remove leading space from all lines
#15926 updated the submodule hash to point to a commit on a private branch that included changes for compiling with the 5.10.179 kernel. However, this submodule hash should've pointed to one on the master branch, not on a private branch. Fix this with this PR.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
sonic-mgmt test failure is seen for update_firmware component API
Microsoft ADO: 25208748
How I did it
Edited API 2.0 to fix this issue.
How to verify it
Run sonic-mgmt test after the fix and verify it passes.
This feature was meant to be enabled but was accidentally left disabled.
Also downgrades the select/deselect messages to KERN_INFO to reduce log
spam.
Fixes#14546.
Signed-off-by: Christian Svensson <blue@cmd.nu>
- Why I did it
To support the building of ARM-based docker-sonic-vs.gz
- How I did it
Fixed SYNCD_VS build rule to be architecture-specific.
- How to verify it
make configure PLATFORM=vs PLATFORM_ARCH=arm64
make target/docker-sonic-vs.gz
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support
SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
### Why I did it
1. Enhance the diagnosis information collecting mechanism
- If the option `-v` is fed, it will pass additional diagnosis flags to mlxfwmanager
- Collect all the output from mlxfwmanager and print them to syslog if it fails
2. Abort syncd in case waiting for device or upgrading firmware fails
Signed-off-by: Stephen Sun <stephens@nvidia.com>
### How I did it
#### How to verify it
Regression and manual test
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.
- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
To avoid errors when the sfputil show error-status -hw is called from the host OS (not from the pmon docker).
How I did it
Remove the self.sdk_handle parameter from the _get_module_info() function.
How to verify it
Execute the sfputil show error-status -hw
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
Support Intel Tofino based platforms Netberg Aurora 750
ASIC: Intel Tofino BFN-T10-064Q
Pors: 64x 100G
How I did it
Added specification to device/netberg directory
Added platform/barefoot/sonic-platform-modules-netberg contains kernel modules, scripts and sonic_platform packages.
Modified the platform/barefoot/platform-modules-netberg.mk to include Aurora 750 related ID.
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
What I did it
Add new platform arm64-ragile_ra-b6010-48gt4x-r0 (Centec)
ASIC Vendor: Centec
Switch ASIC: Centec
Port Config: 48x1G+4x10G
Why I did it
Add new platform RA-B6010-48GT4X
How I did it
Add new platform RA-B6010-48GT4X
Signed-off-by: pettershao-ragilenetworks <pettershao@ragilenetworks.com>
Ignore intermittent IO errors during get_change_event in the Platform API
Fix tunings for some ports on CatalinaDD
Fix kernel module build for 6.1 kernel in preparation of bookworm upgrade
Why I did it
System health config is missing in few Dell platforms.
How I did it
Added system health monitoring config and its related API's
How to verify it
show system-health summary/detail commands.
- Why I did it
watchdogutil uses platform API watchdog instance to control/query watchdog status. In Nvidia watchdog status, it caches "armed" status in a object member "WatchdogImplBase.armed". This is not working for CLI infrastructure because each CLI will create a new watchdog instance, the status cached in previous instance will totally lose. Consider following commands:
admin@sonic:~$ sudo watchdogutil arm -s 100 =====> watchdog instance1, armed=True
Watchdog armed for 100 seconds
admin@sonic:~$ sudo watchdogutil status ======> watchdog instance2, armed=False
Status: Unarmed
admin@sonic:~$ sudo watchdogutil disarm =======> watchdog instance3, armed=False
Failed to disarm Watchdog
- How I did it
Use sysfs to query watchdog status
- How to verify it
Manual test
Unit test
- Why I did it
Change Mellanox platform API implementation to use ASIC driver sysfs for the module operational state and status error fields.
- How I did it
Modify the platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py file by change the call of sx_mgmt_phy_module_info_get() SDK API to sysfs
- How to verify it
Simulate the unplug cable event
Check the CLI output
sfputil show presence
sfputil show error-status -hw
Simulate the plug cable event
Repeat 2 step
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
SONiC changes:
1. Support Spectrum4 ASIC FW binary building.
2. Support new SDK sx-obj-desc lib building since new SAI need it.
3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3
SDK/FW bug fixes
1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
SDK/FW Features
1. On SN2700 all ports can support y cable by credo
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
- How I did it
Update SDK/FW/SAI make files
- How to verify it
Run full sonic-mgmt regression on Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Update Mellanox MFT tool to version 4.25.0-62
- How I did it
Update the MFT tool make file
- How to verify it
Run full sonic-mgmt regression.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Add PDDF support on following Ufispace platforms with Broadcom ASIC
S9110-32X
S8901-54XC
S7801-54XS
S6301-56ST
How I did it
Add PDDF configuration files, scripts and python files
How to verify it
Run pddf commands and show commands.
Signed-off-by: nonodark <ef67891@yahoo.com.tw>
* Update sairedis submodule
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This is a reland of #15720, which was reverted in #15995 due to the RPC
package build failing. That failure has since been fixed, and the
PR pipeline has been updated to build the RPC package so that this is
checked at the PR stage.
This submodule update brings in the following changes:
```
4dbdb21 Fix RPC package build failure due to shell syntax issue (#1268)
588d596 Make sure new binaries replace existing binaries in docker-sonic-vs (#1269)
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
```
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update sairedis submodule with the fix for the RPC package build
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
- Why I did it
Increase UT coverage for Nvidia platform API code
Work item tracking
Microsoft ADO (number only):
- How I did it
Focus on low coverage file:
1. component.py
2. watchdog.py
3. pcie.py
- How to verify it
Run the unit test, the coverage has been changed from 70% to 90%
- Why I did it
Added the fwtrace config files in order to be able to call the mlxstrace utility during the show techsupport dump.
Work item tracking
Microsoft ADO (number only):
- How I did it
Added fwtrace config files. Added path to these files to sai.profile for each mlnx device.
- How to verify it
Execute the show techsupport command and check if mlxstrace output is in system dump.
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
This reverts commit e0927e28af.
Why I did it
Reverts #15720
It breaks build for target/debs/bullseye/syncd_1.0.0_amd64.deb
make[2]: Entering directory '/sonic/src/sonic-sairedis'
dh_install
# Note: escape with an extra symbol
if [ -f debian/syncd-rpc/usr/bin/syncd_init_common.sh ] ; then
/bin/sh: 1: Syntax error: end of file unexpected (expecting "fi")
make[2]: *** [debian/rules:65: override_dh_install] Error 2
make[2]: Leaving directory '/sonic/src/sonic-sairedis'
make[1]: *** [debian/rules:51: binary] Error 2
make[1]: Leaving directory '/sonic/src/sonic-sairedis'
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit status 2
Work item tracking
Microsoft ADO (number only): 24691535
How I did it
How to verify it
Why I did it
Updating the iSMART_64 tool for supporting latest debian releases.
How I did it
On branch new_ismart
Changes to be committed:
(use "git restore --staged ..." to unstage)
modified: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iSMART_64
How to verify it
In s6100, run the iSMART_64 tool.
md5sum - 24725730d7649769c7ba50971c1f2955
Midstone platform has compilation error in master branch, fixed the same.
How I did it
Due to bullseye migration i2c_new_dummy API is deprecated modified with i2c_new_dummy_device.
How to verify it
Verified target/debs/bullseye/platform-modules-midstone-200i_0.2.2_amd64.deb is generated
Co-authored-by: Kannan Selvaraj <skannan@celestica.com>
Why I did it
[E1031] fix pca9548 initializes failed occasionally in stress test.
When failure happened, ismt i2c bus hang up and need power cycle to
recover it.
How I did it
Add 0.5s delay between setuping and configuring pca9548 i2c mux.
How to verify it
Reboot stress test at least 100 times without failure.
This submodule update needs to be manually done due to build changes
done in the sairedis submodule. Specifically, Debian build profiles are
now being used instead of dpkg build targets, and dbgsym packages are
being used instead of dbg packages. Because of this, there needs to be
changes on the sonic-buildimage side for this.
This submodule update brings in the following changes:
ce8f642 [vs] Use boost join to concatenate switch types in config (#1266)
d6055a2 [vslib]: Temporaily map DPU switch type to NVDA_MBF2H536C (#1259)
e1cdb4d [CodeQL]: Use dependencies with relevant versions in azp template. (#1262)
c08f9a2 [CI]: Fix collect log error in azp template. (#1260)
eed856c [CodeQL]: Fix syncd compilation in azp template. (#1261)
a3f1f1a Reland 'Make changes to building and packaging sairedis (#1116)' (#1194)
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
To fixsonic-net/sonic-mgmt#8786
How I did it
Modified Fan API to check whether the data retrieved is valid or not and return accordingly
How to verify it
Verify whether API 2.0 is loaded properly or not.
Execute CLI's like "show version", "show interface status", "show platform psustatus" etc..
= Why I did it
To optimize Mellanox platform SAI build
- How I did it
SAI debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release.
- How to verify it
Configure/build for Mellanox platform, check the image and ensure that correct SAI debs are included.
- Why I did it
The reset cause "reset_from_comex" has been removed by hw-management, hence removing it from platform API code
- How I did it
Remove reset_from_comex from reboot cause mapping
- How to verify it
Manual test
- Why I did it
BIOS on new generation switch can come with a file type of cap or cab. Needs to add support to these file type.
Also ONIE version on new devices can have a suffix of 'dev'.
- How I did it
Added cap & cab as possible component extensions for ComponentBIOS.
Update the ONIE version regex to include dev signed versions.
- How to verify it
Update BIOS.
Why I did it
port_config.ini and hwsku.json are needed to generate the default config
switch_type needs to be "dpu" to spawn the right set of processes during dvs initialization and to make sure that DASH APIs can be handled properly
Work item tracking
Microsoft ADO 24375371:
How I did it
Use the same hwsku.json and port_config.ini for DPU-2P as the ones used for Nvidia-MBF2H536C SKU in nvidia-sonic sonic-buildimage repo.
Set switch_type to "dpu" in DEVICE_METADATA configuration to make sure DASH specific APIs are handled properly
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
* [202012][platform/barefoot] (#8543)
Why I did it
Pcied running by python 2.
How I did it
dropped python2 support and add python3 support for pcied in file docker-pmon.supervisord.conf.j2
How to verify it
docker exec pmon supervisorctl status
* [Netberg][nba710] Added initial support for Aurora 710
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
---------
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
Co-authored-by: Kostiantyn Yarovyi <kostiantynx.yarovyi@intel.com>
Why I did it
To support dynamic swapping of module types/speeds (400G/100G/40G)
To optimize CMIS ZR optics operation
How I did it
Reinitialize xcvr_api at module removal/insertion time, and also optimize cache for ZR optics.
How to verify it
Verify that different (supported) module types can be dynamically swapped (removed/inserted) and that each is properly provisioned by Xcvrd and has its EEPROM information accurately reported in Redis DB (using "show transceiver eeprom") as well as "sfputil show eeprom" direct access.
Also verify that Xcvrd initialization and operation with 400G CMIS ZR optics is both efficient and functional.
** edit 6/14/23: pushed enhanced caching (full memory map) support and elimination of base class APIs override.
Why I did it
Sharing the storage of syncd with other proprietary application extensions allows them to communicate with syncd in differnt ways.
If one container wants to pass some information to syncd then shared storage can be used. However, today the shared storage isn't cleaned on restarts making it possible for syncd to read out-of-date information generated in the past.
NOTE: No plans to use it for standard SONIC dockers and we are working on removing the SDK dependency from PMON docker
How I did it
Implemented new service to clean the shared storage.
How to verify it
Do reboot/fast-reboot/warm-reboot/config-reload/systemctl restart swss and verify /tmp/ is cleaned after each restart in syncd container.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Define a generic 2-port NPU SKU for docker-sonic-vs to
enable DASH vstests to pass on azure pipelines
Work item tracking
Microsoft ADO 24375371:
How I did it
Define a generic 2-port NPU hwsku that is used only for DASH-specific vstests.
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
- Why I did it
SDK patches for iproute2 were added to SONiC tree as a temporary solution.
Now that SDK with the patches is available, I have removed the patches from SONiC tree and we consume them from SDK github during compilation.
- How I did it
During build we download SDK iproute2 patches from SDK github (or from the URL provided by user if compiling SDK from sources) and apply them before compilation.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
- Why I did it
Adjust the warning threshold implementation according to the latest algorithm update
- How I did it
Modify power warning and critical thresholds methods
- How to verify it
Unit test updated to cover the change
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Add the patchwork link to the commit description for non-upstream patches if present
- How I did it
Parse the patchwork/<patch_name>.txt file from hw-mgmt
Why I did it
FPGA driver crash was observed in Dell FPGA based platforms.
How I did it
Fixed FPGA crash
How to verify it
Load FPGA driver and check whether the kernel crashes.
Why I did it
When git clone -b xxx command is used the versions-git will reset the HEAD of the git to the commit ID in the versions-git file. Which causes incorrect commit to be checked out causing build errors.
Work item tracking
Microsoft ADO (number only):
How I did it
Split ‘git clone -b’ into two steps to avoid owerwrite
Git clone
cd mrvl-prestera; git checkout ; cd ..
How to verify it
Build marvell-arm64 target using below instructions
make init
make configure PLATFORM=marvell-arm64 PLATFORM_ARCH=arm64
make target/sonic-marvell-arm64.bin SONIC_BUILD_JOBS=2
- Why I did it
Bug fix:
- * I2C bus is stuck - Unable to probe I2C bus 2-0048, which causes /var/run/hw-management/config/sfp_counter, module_counter to be zero and pmon docker unable to start.
- How I did it
Update HW-MGMT package version in the make file
Update HW-MGMT submodule pointer
-How to verify it
Run full sonic-mgmt regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
Facilitate Automatic integration of sdk kernel patches into SONiC.
**Inputs to the Script:**
1) `MLNX_SDK_VERSION` Eg: `4.5.4206`
2) `MLNX_SDK_ISSU_VERSION` Eg: `101`
**Note: If nothing is provided the one already present in the sdk.mk file is used**
3) `MLNX_SDK_SOURCE_BASE_URL:`
**Note: If nothing is provided the upstream sdk drivers url is used**
4) `CREATE_BRANCH: (y|n)` Creates a branch instead of a commit (optional, default: n)
5) `BRANCH_SONIC`: Only relevant when CREATE_BRANCH is y. `Default: master`.
Note: These should be provided through `SONIC_OVERRIDE_BUILD_VARS ` parameter
**Output:**
1) Script creates a commit in sonic-linux-kernel with any updates to sdk-kernel patches in sonic in accordance with the version provided by `MLNX_SDK_VERSION`
**Note: Script Doesn't commit anything to linux-kernel when there aren't any changes required..**
#### How I did it
1) Added a new make target which can be invoked by calling `make integrate-mlnx-sdk`
```
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6f38dca_integrate_4.5.4206
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 1
d64d1e7 (HEAD -> master_6f38dca_integrate_4.5.4206) Intgerate MLNX SDK 4.5.4206 Kernel Patches
```
Changes made will be summarized under `sonic-buildimage/integrate-mlnx-sdk_user.out` file. Debugging and troubleshooting output is written to `sonic-buildimage/integrate-mlnx-sdk.log` files
[log_files.zip](https://github.com/sonic-net/sonic-buildimage/files/11226441/log_files.zip)
#### Limitations:
1) Assumes that the sdk kernel patches are always upstreamed
#### How to verify it
Build the Kernel and test
Why I did it
Align with SAI headers v1.12.0
Work item tracking
Microsoft ADO (number only):
How I did it
Update Mellanox SAI submodule
How to verify it
Compile SONiC image
- Why I did it
The current implementation of SFP reset, LPM, present relies on SDK API. This PR moves the implementation to SDK sysfs. By this PR, it gains following benefit:
1. SDK sysfs provides better performance.
2. Host side and container side share the same code.
3. Code is much cleaner.
- How I did it
Use SDK sysfs to implement SFP reset, LPM, present.
- How to verify it
1. Manual test.
2. Unit test.
SDK/FW Fixed Issues:
• When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work.
• When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value
• After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
• Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set
• If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail.
• In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed
• When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources
• When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck
• SN2201 Module 1 is considered to be present/linked while no cable/module is plugged
• On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes
SAI New features:
• ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets.
• PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event.
• Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario.
• Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario.
SAI Fixed issues:
• When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it
• When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Add new Nokia build target and establish an arm64 build:
Platform: arm64-nokia_ixs7215_52xb-r0
HwSKU: Nokia-7215-A1
ASIC: marvell
Port Config: 48x1G + 4x10G
How I did it
- Change make files for saiserver and syncd to use Bulleseye kernel
- Change Marvell SAI version to 1.11.0-1
- Add Prestera make files to build kernel, Flattened Device Tree blob and ramdisk for arm64 platforms
- Provide device and platform related files for new platform support (arm64-nokia_ixs7215_52xb-r0).
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds S3IP supported sysfs attribute in common FAN driver of PDDF.
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds the S3IP supported sysfs attributes in PDDF common LED driver.
Why I did it
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds support for pddf-s3ip-init.service and enables it in PDDF.
Why I did it
ptf_nn_agent failed to start in dnx rpc syncd because module afpacket was not installed.
Please see issue sonic-net/sonic-mgmt#7822
How I did it
Add downloading ptf afpacket module in docker file.
How to verify it
Verified that ptf_nn_agent was started successfully in dnx rpc syncd with the change.
- SAI-1.11.0 support
- SONIC 20220531.25 OC Failure: Everflow testcases failing due to SAI orchagent crash
- SONIC 20220531.25 OC Failure: ACL IPv6 testcases.
- TPID support
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
- Why I did it
As a LED indicator to help user to find switch location in the lab, UID LED is a useful LED in Mellanox switch.
- How I did it
I add a new member _led_uid in Mellanox/Chassis.py, and extend Mellanox/led.py to support blue color.
Relevant platform-common PR sonic-net/sonic-platform-common#369
- How to verify it
Add unit test cases in test.py, and do manual test including turn-on/off/show uid led.
Signed-off-by: David Xia <daxia@nvidia.com>
Fix lpmode on 7060DX5-32
Fix psu led issue on 7060DX5-64
Use sonic_xcvr lpmode if platform does not support hw lpmode
Add chassis cooling algorithm
Change cooling algorithm default interval to 10s
Force filesystem sync on linecard reboot
- Why I did it
Add the commit-id patch map in the commit message.
- How I did it
By parsing the patch DB from hw-mgmt
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Currently, LED sysfs path is hardcoded. We will need change LED code if new LED color is supported for new platforms. This PR is aimed to improve this. By this PR, LED sysfs path is deduced from LED capability file.
- How I did it
Improve LED management on Nvidia platform:
get LED capability from capability file and deduce sysfs name according to the capability
- How to verify it
Unit test
Manual test
- Why I did it
To improve ASAN backtrace output when the call stack contains a code that is not compiled with -fno-omit-frame-pointer.
- How I did it
Added fast_unwind_on_malloc=0 to the ASAN_OPTIONS
- How to verify it
Build and test docker-syncd-mlnx.gz with ENABLE_ASAN=y
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Using timer-override.conf, we modify the fstrim.timer service.
For armhf, Nokia-7215 platform, we modify fstrim.timer to run daily
instead of weekly. This is required because the size of the SSD on
this platform is 16GB, which on average is nearly 10 times smaller than
most other sonic platforms. With smaller disk and the ever increasing
level of logging done by sonic, this change is required to prevent
the SSD from entering a read-only state due to inadequate free blocks.
- Fix watchdog reboot cause for wolverine linecard
- Fix PSU fan speed of 0% by adding max RPM to most psu descriptions
- Add product DCS-7060DX5-64
- Add product DCS-7060DX5-32
- Why I did it
Add NVIDIA Copyright header to NVIDIA files added lately
- How I did it
Add NVIDIA Copyright header for the relevant files
- How to verify it
N/A (only commented text was added).
Normally doesn't need to measure i2c calls.
Also switched to use timespec64_sub() to ensure time delta normalized
Co-authored-by: Kostiantyn Yarovyi <kostiantynx.yarovyi@intel.com>
- Why I did it
Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2
- How I did it
Download iproute2 from Debian repository, apply patches and compile to create a new target.
The target is then deployed in syncd container of Mellanox switches only.
The new target is called IPROUTE2_MLNX.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
Why I did it
Update sonic-platform submodule for Nokia-7250IXRE Platform. This requires the new NDK 22.9.8 and above
How I did it
Update submodule sonic-platform for Nokia-7250IXRE platform.
c9f316e Disparate process and thread-safe protection for MDIPC transport, and refactored presence logic to better align with SfpStateUpdateTask operation
a3486cc Added _get_module_bulk_info() and cache the info for 5 seconds to optimize the chassisd update.
4b2e729 Fixed the nokia_cmd show qfpga help display
7b87049 Fixed the nokia_cmd show midplane helper dispaly.
83eabea Add "nokia_cmd set ndk-monitor-action" and "nokia_cmd set ndk-log-level" commands
8aad7de Add nokia_cmd show ndk-version
d2c55e3 Modify the psu.py and module.py to optimize the psud running time
Signed-off-by: mlok <marty.lok@nokia.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
DEPENDS: #12852
Why I did it
To support BGP pending FIB suppression.
How I did it
I backported patches from FRR 8.4 feature that allows communicating ASIC route status back to FRR.
Also, added a new field in DEVICE_METADATA YANG model table. Added UT for YANG model changes.
How to verify it
Run on the switch.
- Why I did it
Package Marvell/Innovium CLI shell.
- How I did it
Include shell packages.
- How to verify it
Platform specific shell commands.
Signed-off-by: rck-innovium rck@innovium.com
