[Mellanox] Update SAI to 2211.24.0.21 and SDK/FW to 4.5.5142/2010_5144 (#15072)
SDK/FW Fixed Issues: • When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work. • When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value • After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked. • Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set • If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail. • In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed • When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources • When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck • SN2201 Module 1 is considered to be present/linked while no cable/module is plugged • On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes SAI New features: • ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets. • PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event. • Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario. • Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario. SAI Fixed issues: • When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it • When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty. Signed-off-by: Kebo Liu <kebol@nvidia.com>
This commit is contained in:
parent
a9cd1a655b
commit
3e9437b63e
@ -21,28 +21,28 @@ MLNX_FW_BASE_PATH = $(MLNX_SDK_BASE_PATH)
|
||||
# Place an URL here to FW if you want to download FW instead
|
||||
MLNX_FW_BASE_URL =
|
||||
|
||||
SIMX_VERSION = 5.1-1065
|
||||
SIMX_VERSION = 23.4-1072
|
||||
|
||||
FW_FROM_URL = y
|
||||
|
||||
MLNX_FW_ASSETS_RELEASE_TAG = fw-2010.4204
|
||||
MLNX_FW_ASSETS_RELEASE_TAG = fw-2010.5144
|
||||
MLNX_FW_ASSETS_URL = $(MLNX_ASSETS_GITHUB_URL)/releases/download/$(MLNX_FW_ASSETS_RELEASE_TAG)
|
||||
|
||||
ifeq ($(MLNX_FW_BASE_URL), )
|
||||
MLNX_FW_BASE_URL = $(MLNX_FW_ASSETS_URL)
|
||||
endif
|
||||
|
||||
MLNX_SPC_FW_VERSION = 13.2010.4204
|
||||
MLNX_SPC_FW_VERSION = 13.2010.5144
|
||||
MLNX_SPC_FW_FILE = fw-SPC-rel-$(subst .,_,$(MLNX_SPC_FW_VERSION))-EVB.mfa
|
||||
$(MLNX_SPC_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
||||
$(MLNX_SPC_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC_FW_FILE)
|
||||
|
||||
MLNX_SPC2_FW_VERSION = 29.2010.4204
|
||||
MLNX_SPC2_FW_VERSION = 29.2010.5144
|
||||
MLNX_SPC2_FW_FILE = fw-SPC2-rel-$(subst .,_,$(MLNX_SPC2_FW_VERSION))-EVB.mfa
|
||||
$(MLNX_SPC2_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
||||
$(MLNX_SPC2_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC2_FW_FILE)
|
||||
|
||||
MLNX_SPC3_FW_VERSION = 30.2010.4204
|
||||
MLNX_SPC3_FW_VERSION = 30.2010.5144
|
||||
MLNX_SPC3_FW_FILE = fw-SPC3-rel-$(subst .,_,$(MLNX_SPC3_FW_VERSION))-EVB.mfa
|
||||
$(MLNX_SPC3_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
||||
$(MLNX_SPC3_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC3_FW_FILE)
|
||||
|
@ -1,6 +1,6 @@
|
||||
# Mellanox SAI
|
||||
|
||||
MLNX_SAI_VERSION = SAIBuild2211.23.1.0
|
||||
MLNX_SAI_VERSION = SAIBuild2211.24.0.21
|
||||
|
||||
export MLNX_SAI_VERSION
|
||||
|
||||
|
@ -1 +1 @@
|
||||
Subproject commit ea74f041dad129c2e8a043d8a7d6da696b6b93eb
|
||||
Subproject commit 3c07c276a725af0b7aa31b41c176a83c152a3512
|
@ -14,7 +14,7 @@
|
||||
# See the License for the specific language governing permissions and
|
||||
# limitations under the License.
|
||||
#
|
||||
MLNX_SDK_VERSION = 4.5.4206
|
||||
MLNX_SDK_VERSION = 4.5.5142
|
||||
MLNX_SDK_ISSU_VERSION = 101
|
||||
|
||||
MLNX_ASSETS_GITHUB_URL = https://github.com/Mellanox/Spectrum-SDK-Drivers-SONiC-Bins
|
||||
|
Loading…
Reference in New Issue
Block a user