Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There was a typo in hwsku specified as part of #10889
How I did it
Replaced with the correct hwsku
How to verify it
test_cfggen.py is passing
Updating sonic-utilities sub module with the following commits
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### Why I did it
To fix hostcfgd can't terminate by sigint issue, need update sonic-swss-common submodule.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
For yang model, sample_config_db.json file was missing Sample data for the features SNAT/DNAT/IPMC
#### How I did it
Added the SNAT,DNAT,IPMC(low Threshold/high threshold/threshold_type)entries in CRM table.
#### How to verify it
With sanity Build/test only.
[muxorch] Handling optional attributes in muxorch (#2288)
Update netlink messages handler (#2233)
Broadcast Unknown-multicast and Unknown-unicast Storm-control (#1306)
[vstest]: Increase PollingConfig default timeout (#2285)
[FDB] Fix fbdorch to properly handle syncd FDB FLUSH Notif (#2254)
[macsecorch]: Support for non-default sa per sc (#2250)
Migrating the NAT vs tests from Click to direct DB access (#2278)
[neighsync] Ignoring IPv4 link local addresses (#2260)
[IntfMgrd] Retry adding ipv6 prefix by setting disabled_ipv6 flag (#2267)
Increase Redis Timeout value for Switch Create Opration for Packet (#2243)
Update fdborch.cpp (#2261)
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
With SAI V.1.10.2, new interface types CR8/SR8/KR8/LR8 have been introduced, we should also support them from the CLI configuration.
- How I did it
Add new enum for the new interface types
- How to verify it
Run the "config interface type" command to verify new interface types can be accepted and handled correctly.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
It is to improve the build performance, when building multiple targets.
The modified time of downloaded files should be not older than the file .platform.
If not, the file will be downloaded again, when building any dependent targets.
How I did it
When downloading the packages from web site, the modified time will be changed by the command "touch".
#### Why I did it
To ensure that some internal testcases do not break due to external changes
#### How to verify it
Ran test_cfggen.py with the changes and it passed
- Why I did it
YANG schema is missing for sonic-telemetry
- How I did it
Added YANG schema to sonic-yang-models and appropriate unit tests inside of test and test_config
- How to verify it
Build sonic-yang-models python wheels target and verify that unit tests are passing
Why I did it
Upgrade FRR to version 8.2.2. Build libyang2 required by FRR.
How I did it
Update FRR version and tag.
How to verify it
Following tests were performed on sonic-vs:
BGP docker status check
BGP configuration and session establishment
Route redistribution and ping
Issued show commands to check the bgp neighbor and routes
Checked app-db to ensure bgp routes are installed with correct interface and nexthop.
Create VRF and check FRR knows the VRF
Check VRF routes are installed in app-db with correct Vrf name and next-hop
Establish BGP Evpn session and check if Evpn routes (multicast, mac, prefix) are exchanged and installed correctly in app-db.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
resolves#10761.
For VOQ chassis, the Recirc port, which was added for the Everflow, stays admin down after load minigraph.
This PR add the fix to make the recirc port as admin up
How I did it
The PR adds a change in minigraph.py, if port has role as Rec make the the port as admin-status up.
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
To further add cable_type and soc_ipv4 field to table MUX_CABLE, this PR tries to parse the minigraph like the following:
```
<Device i:type="SmartCable">
<ElementType>SmartCable</ElementType>
<SubType>active-active</SubType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.3/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<ManagementAddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</ManagementAddressV6>
<SerialNumber i:nil="true" />
<Hostname>svcstr-7050-acs-1-Servers0-SC</Hostname>
</Device>
<Device i:type="Server">
<ElementType>Server</ElementType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.2/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>fc02:1000::2/64</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<Hostname>Servers0</Hostname>
</Device>
```
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
get_mux_cable_entries will try to get the mux cable device from the devices list and get the cable type and soc ip address from the device definition.
How to verify it
Pass the unit-test
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
What I did:
Added support to create route-map action set tag <user define value>
when the the allow prefix list matches. The tag can ben define by user in
constants.yml.
Why I did:
Since for Allow List feature we call from base route-map allow-list route-map having set tag option provides way for base route-map to do match tag and take any further action if needed. Adding tag provide metadata that can used by base route-map
Why I did it
https://github.com/Azure/SONiC/blob/master/doc/vxlan/Overlay%20ECMP%20with%20BFD.md
From the design, need to advertise the route with community string, the PR is to implement this.
How I did it
To use the route-map as the profile for the community string, all advertised routes can be associated with one route-map.
Add one file, mangers_rm.py, which is to add/update/del the route-map. Modified the managers_advertise_rt.py file to associate profile with IP route.
The route-map usage is very flexible, by this PR, we only support one fixed usage to add community string for route to simplify this design.
How to verify it
Implement new unit tests for mangers_rm.py and updated unit test for managers_advertise_rt.py.
Manually verified the test case in the test plan section, will add testcase in sonic-mgmt later. Azure/sonic-mgmt#5581
Why I did it
Config db schema generated by minigraph should run yang validation.
How I did it
Modify run_script to add yang validation.
How to verify it
Run sonic-config-engine unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
This is part of HLD Azure/SONiC#925
#### Why I did it
Add link-training support
#### How I did it
Update SONiC YANG for port link-training support
#### Description for the changelog
Add "link_training" to sonic-port.yang
#### Link to config_db schema for YANG module changes
https://github.com/sonic-net/SONiC/wiki/Configuration#port
Why I did it
Previous subport unit tests uses port channel names like PortChannel01, so for subport name generated PortChannel01.10, it exceeds Linux network interface name 15 char limit.
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
Modify PortChannel01 to PortChannel1.
Why I did it
Fixes#10793
How I did it
Removed the switch_type validation from the Yang model.
How to verify it
compile sonic_yang_mgmt-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
288c2d8 Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)
bce4694 [autoneg] add support for remote speed advertisement (#2124)
a73f156 [show][vrf]Fixing show vrf to include vlan subinterface (#2158)
7a06457 [auto_ts] Enable register/de-register auto_ts config for APP Extension (#2139)
083ebcc Add transceiver-info items advertised for cmis-supported moddules (#2135)
0811214 Validate destination port is not LAG (#2053)
6ab1c51 [minigraph] Consume golden_config_db.json while loading minigraph (#2140)
c37a957 [Kdump] Remove the duplicate logic if Kdump was disabled (#2128)
1143869 Ordering fix for sfpshow eeprom (#2113)
fdb79b8 Allow fw update for other boot type against on the previous "none" boot fw update (#2040)
a54a091 [GCU] Supressing YANG errors from libyang while sorting (#1991)
fbfa8bc [GCU] Enabling AddRack and adding RemoveRack tests (#2143)
d012be9 [Command-Reference] Add CLI docs for route flow counter (#2069)
8c07d59 [Mellanox] [reboot] [asan] stop asan-enabled containers on reboot (#2107)
697aae3 Fix speed parsing when speed is NOT fetched from APPL_DB (#2138)
22a388b [show] fix get routing stack routine (#2137)
cb3a047 Support option --ports of config qos reload for reloading ports' QoS and buffer configuration to default (#2125)
154a801 Enhance "config interface type/advertised-type" to be blocked on RJ45 ports (#2112)
3732ac5 Add CLI for route flow counter feature (#2031)
29771e7 [techsupport] improve robustness (#2117)
f9dc681 [intfutil] Display RJ45 port and portchannel speed in 'M' instead of 'G' when it's <= 1000M (#2110)
781ae9f [config] Do not enable pfcwd for BmcMgmtToRRouter (#2136)
23e9398 [scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)
576c9ef [scripts/fast-reboot] stop timers in advance (#2131)
4dad79c bugfix: incorrect command for portchannel creation (#2134)
c17b1f4 [show][muxcable] Decrease the timeout for show mux status/hwmode (#2130)
49d61f8 [scripts/fast-reboot] cleanup (#2132)
52ca324 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066)
9e2fbf4 Update db_migrator to support `pfcwd_sw_enable` (#2087)
4010bd0 FGNHG CLI changes (#1588)
6bd54d0 Fix 'show mac' output when FDB entry for default vlan is None instead of 1 (#2126)
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
The SSCI is wrong in the output of MACsec so that the virtual SAI cannot parse the output corretly.
The wrong output:
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 103, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
SSCI 33554432, RXSC: 525400edac5b0001, state on
0: PN 107, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
offload: off
```
Expected
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 252, state on, SSCI 33554432, key 12cbc4b64e26c9a1ba14d810da20d16e
RXSC: 525400edac5b0001, state on
0: PN 264, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
```
#### How I did it
Move SSCI before the key so that SSCI will not be the front of SC information.
#### Why I did it
To pick up new commits:
* 60d2467 Add depends to p4rt debian package
#### How I did it
update sonic-p4rt/sonic-pins submodule pointer
#### How to verify it
should be able to build with p4rt enabled.
#### Why I did it
This function is critical for is_multi_asic() and SonicDBConfig initializing. No explicit reading ConfigDB. Otherwise it will implicitly trigger SonicDBConfig initializing.
#### How I did it
1. No explicit reading ConfigDB in get_asic_conf_file_path()
2. Collect asic_conf_path_candidates lazily to prevent any unnecessary side effect and improve the performance
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
submodule update for the following commits
7a203b1 [chassis] Add new tables in counter db for Voq counter support. (#530)
5effea3 add new table schema for bgp profile (#608)
130dca5 [ci] Update azure pipeline branch variable reference.
708ed39 [ci] Parameterize pipeline and improve azure pipeline (#599)
9c08456 Added new P4RT tables. (#604)
#### Why I did it
Fix issue: Non compliant leaf list in config_db schema: https://github.com/Azure/sonic-buildimage/issues/9801
#### How I did it
The basic flow of DPB is like:
1. Transfer config db json value to YANG json value, name it “yangIn”
2. Validate “yangIn” by libyang
3. Generate a YANG json value to represent the target configuration, name it “yangTarget”
4. Do diff between “yangIn” and “yangTarget”
5. Apply the diff to CONFIG DB json and save it back to DB
The fix:
• For step #1, If value of a leaf-list field string type, transfer it to a list by splitting it with “,” the purpose here is to make step#2 happy. We also need to save <table_name>.<key>.<field_name> to a set named “leaf_list_with_string_value_set”.
• For step#5, loop “leaf_list_with_string_value_set” and change those fields back to a string.
#### How to verify it
1. Manual test
2. Changed sample config DB and unit test passed
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
Address build failures due to sonic config engine unit tests failing. Failures are due to referencing format used in Arista 7800 sample output for buffer template
How I did it
Remove referencing format
How to verify it
Sonic config engine wheel should be built successfully
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Fixes#10158
How I did it
Add yang model for config_db table BGP_VOQ_CHASSIS_NEIGHBOR and UT
closes#10157
Why I did it
Add yang model for the bgp_internal_neighbor table in config_db
How I did it
Add new yang model file and unit tests
How to verify it
UT and compile sonic_yang_models-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
To add support for 800G speed for port in the yang.
- How I did it
Change limitation from 400G to 800G.
- How to verify it
Set a port speed to 800G and run the yang DB validation. e.g. by using dynamic port breakout.
#### Why I did it
Need to pass LY_CTX_DISABLE_SEARCHDIR_CWD to Context in order to disable automatically searching for schemas in current working directory (which is by default searched automatically)
#### How I did it
add additional attribute into YANG context
#### How to verify it
Create some invalid link on switch :
1) **ln -s /usr/abc xxx**
2) run **spm list**
--> There should not be these messages:
```
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
```
Add the following commits:
- [orchagent, crm]: Reset crm threshold exceed count when threshold type changed 5ba6a54786c0fd9b155bb9ea2a7ed724a58aab74
- [pbh] [aclorch] Fixed a bug causes by updating the flow-counter value for the PBH rule 841f00389b338e91ddc4de460ace4ff96adfa796
- [ACL]Avoid incrementing crm count when ACL rule create fails 3d3364f9715fa05fbdf2d09b08676c3055903b84
- set remote vtep the netdev down before delete 7f53db782aed2973f4ff6807911b5a549461f3c7
- Removing Vnet with scope default 2ea8581da4ba6f97bebde4845a234d7c810e5515
#### Why I did it
Adding exceptlionList to validation exception
#### How I did it
Check code.
#### How to verify it
Ran manually.
- Run full config validation from a KVM
- Print the thrown exception
**Before**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
```
**After**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
exceptionList:["'status'"]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Can not start sonic-hostservice
How I did it
Install python3-dbus and systemd-python, and replace invalid path
How to verify it
Start the service with below commands:
sudo systemctl start sonic-hostservice
sudo systemctl status sonic-hostservice
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
Why I did it
Allow portchannel vlan sub intf long name format as long as it follows Linux interface name length limit(<16).
How I did it
Modify the leaf name check.
How to verify it
Test case passes.
Why I did it
Provide fix for comment: https://github.com/Azure/sonic-buildimage/pull/10475/files#r847753187;
How I did it
Try exception is not required in this scenario, so remove and modify to initial db config according to single or multi-asic platforms.
How to verify it
Verified on multi-asic device.
* [CG-Fix-CVE-2021-44906] Patching on thrift.0.14.1 for package minimist
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* add more information in patch
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* Update 0003-Remove-minimist-packages.patch
* change the thrift 0.14.1 to package download
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* use the series file for patching
* fix a code defect
#### Why I did it
Fix several bugs:
1. If one vlan member belongs to multiple vlans, and if any of the vlans is "Tagged" type, we respect the tagged type
2. If one vlan member belongs to multiple vlans, and all of the vlans have no "Tagged" type, we override it to be a tagged member
3. make sure `vlantype_name` is assigned correctly in each iteration
#### How to verify it
1. Test the command line to parse a minigraph and make sure the output does not change.
```
./sonic-cfggen -m minigraph.mlnx20.xml
```
The minigraph is for HwSKU Mellanox-SN2700-D40C8S8.
2. Test on a DUT with HwSKU Mellanox-SN2700-D40C8S8
```
sudo config load_minigraph
show vlan brief
```
Checked the "Port Tagging" column in the output.
* [build]: Patch debootstrap to not unmount the host's /proc filesystem
Currently, when the final image is being built (sonic-vs.img.gz,
sonic-broadcom.bin, or similar), each invocation of sudo in the
build_debian.sh script takes 0.8 seconds to run and execute the actual
command. This is because the /proc filesystem in the slave container has
been unmounted somehow. This is happening when debootstrap is running,
and it incorrectly unmounts the host's (in our case, the slave
container's) /proc filesystem because in the new image being built,
/proc is a symlink to the host's (the slave container's) /proc. Because
of that, /proc is gone, and each invocation of sudo adds 0.8 seconds
overhead. As a side effect, docker exec into the slave container during
this time will fail, because /proc/self/fd doesn't exist anymore, and
docker exec assumes that that exists.
Debootstrap has fixed this in 1.0.124 and newer, so backport the patch
that fixes this into the version that Bullseye has.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [build_debian.sh]: Use eatmydata to speed up deb package installations
During package installations, dpkg calls fsync multiples times (for each
package) to ensure that tht efiles are written to disk, so that if
there's some system crash during package installation, then it is in at
least a somewhat recoverable state. For our use case though, we're
installing packages in a chroot in fsroot-* from a slave container and
then packaging it into an image. If there were a system crash (or even
if docker crashed), the fsroot-* directory would first be removed, and
the process would get restarted. This means that the fsync calls aren't
really needed for our use case.
The eatmydata package includes a library that will block/suppress the
use of fsync (and similar) system calls from applications and will
instead just return success, so that the application is not blocked on
disk writes, which can instead happen in the background instead as
necessary. If dpkg is run with this library, then the fsync calls that
it does will have no effect.
Therefore, install the eatmydata package at the beginning of
build_debian.sh and have dpkg be run under eatmydata for almost all
package installations/removals. At the end of the installation, remove
it, so that the final image uses dpkg as normal.
In my testing, this saves about 2-3 minutes from the image build time.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Change ln syntax to use chroot
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
9ac12bf (HEAD -> master, origin/master, origin/HEAD) Fix platform daemon chassisd to handle auto restart on fail (#247)
24fba04 [ycable] fix the logic to update cable_info values when ycable is not present; fix read side logic for ycable (#249)
Updating sonic-utilities sub module with the following commits
f09bd31 Fix UT failed cause by change pycommon to use swsscommon
c092300 Increased pcied unit test coverage to > 80%
7d7c85e Modular chassis: Psud set master led on first run
7195dcc Remove py2 from pipeline
c2e7393 [ycabled] increase UT coverage of ycabled daemon
#### Why I did it
When change pycommon to use swsscommon UT failed in sonic-platform-daemon, need submodule update with UT issue fix.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
Fix UT failed cause by change pycommon to use swsscommon
Increased pcied unit test coverage to > 80%
Modular chassis: Psud set master led on first run
Remove py2 from pipeline
[ycabled] increase UT coverage of ycabled daemon
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
[Build]: Fix pip version constraint conflict issue
When a version is specified in the constraint file, if upgrading the version in build script, it will have conflict issue.
How I did it
If a specified version has specified in pip command line, then the version constraint will be skipped.
* [device config] Adding configuration for default route fallback
* Set sai_tunnel_underlay_route_mode attribute to fallback to default route if more specific route is unavailable.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, PORT table does not have 'lanes' and 'speed' field.
How I did it
Make cfggen command fail when 'lanes' and 'speed' are not provided
How to verify it
Run 'sonic-cfggen -m xxx.xml --print-data' to make sure command fail when 'lanes' and 'speed' not in PORT table
Why I did it
minigraph parser has introduced new type.
How I did it
Update yang models to support BmcMgmtToRRouter.
How to verify it
Run unit test for sonic-yang-models
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
As of https://github.com/Azure/sonic-swss-common/pull/587 the blackout issue in ConfigDBConnector has been resolved.
In the past hostcfgd was refactored to use SubscriberStateTable instead of ConfigDBConnector for subscribing to CONFIG_DB updates due to a "blackout" period between hostcfgd pulling the table data down and running the initialization and actually calling `listen()` on ConfigDBConnector which starts the update handler.
However SusbscriberStateTable creates many file descriptors against the redis DB which is inefficient compared to ConfigDBConnector which only opens a single file descriptor.
With the new fix to ConfigDBConnector I refactored hostcfgd to take advantage of these updates.
#### How I did it
Replaced SubscriberStateTable with ConfigDBConnector
#### How to verify it
The functionality of hostcfgd can be verified by booting the switch and verifying that NTP is properly configured.
To check the blackout period you can add a delay in the hostcfgd `load()` function and also add a print statement before and after the load so you know when it occurs. Then restart hostcfgd and wait for the load to start, then during the load push a partial change to the FEATURE table and verify that the change is picked up and the feature is enabled after the load period finishes.
#### Description for the changelog
[hostcfgd] Move hostcfgd back to ConfigDBConnector for subscribing to updates
Why I did it
Running warm-reboot in a loop for 500 times leads to this error on 318-th iteration:
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors Traceback (most recent call last):
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors File "/usr/bin/restore_neighbors.py", line 24, in <module>
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors from scapy.all import conf, in6_getnsma, inet_pton, inet_ntop, in6_getnsmac, get_if_hwaddr, Ether, ARP, IPv6, ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr
Apr 2 15:56:27.346795 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/all.py", line 25, in <module>
Apr 2 15:56:27.346956 sonic INFO swss#/supervisord: restore_neighbors from scapy.route import *
Apr 2 15:56:27.346995 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/route.py", line 205, in <module>
Apr 2 15:56:27.347089 sonic INFO swss#/supervisord: restore_neighbors conf.iface = get_working_if()
Apr 2 15:56:27.347129 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/linux.py", line 128, in get_working_if
Apr 2 15:56:27.347213 sonic INFO swss#/supervisord: restore_neighbors ifflags = struct.unpack("16xH14x", get_if(i, SIOCGIFFLAGS))[0]
Apr 2 15:56:27.347250 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/common.py", line 31, in get_if
Apr 2 15:56:27.347345 sonic INFO swss#/supervisord: restore_neighbors return ioctl(sck, cmd, struct.pack("16s16x", iff.encode("utf8")))
Apr 2 15:56:27.347365 sonic INFO swss#/supervisord: restore_neighbors OSError: [Errno 19] No such device
The issue was reported to scapy devs secdev/scapy#3369, the fix is secdev/scapy#3371, however there is no released scapy version with this fix right now, thus decided to build scapy v2.4.5 from sources and apply the fix in a form of a patch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
In order to include the following commit:
0f06910 [PBH] Implement Edit Flows (Azure/sonic-swss#2169)
sonic-swss
50d5be2 Make changes to support compiling on Bullseye with GCC 10 (#2216)
0870cf5 [mirrororch]: Implement HW resources availability validation for SPAN/ERSPAN (#2187)
f4ec565 [vlanmgrd] fix use-after-free memory issue (#2211)
c2de7fc [QosOrch] The notifications cannot be drained in QosOrch in case the first one needs to retry (#2206)
5575935 [neighsyncd] increase neighsyncd timeout (#2209)
0f06910 [PBH] Implement Edit Flows (#2169)
6241bbf Remove redundant and problematic code to skip "pool" field in buffer profile handling (#2197)
a55343c [azp]: Set diff coverage threshhold to 80% (#2188)
390cae1 [portsorch]: Prevent LAG member configuration when port has active ACL binding (#2165)
c1d47e6 [VNET]Fixing nexthop group delete during route change (#2198)
8941cc0 [BFD]Registering BFD state change callback during session creation (#2202)
680c539 [vxlan] Remove tunnel map objects on VNET tunnel removal (#2150)
20dde0c Fix for handling broadcom DNX ASIC to have ipv4 and ipv6 ACL rules in separate tables. (#2178)
5b7c949 [FdbOrch] SAI_FDB_EVENT_MOVE generates update with empty update.entry.port_name (#2200)
7350d49 [Vxlanmgr] vnet netdev cleanup during config reload fix (#2191)
2bef62b Validate LAG has members before mirror session create (#2130)
1e4d4ce [VS test] Increase VS test time, skip dpb flaky test (#2195)
6eda965 [vstest]Migrating vs tests from using click commands to direct DB access (#2179)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide speed for port table.
How I did it
Update minigraph xml.
How to verify it
Run sonic-cfggen unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Fix#9746
How I did it
Split the check condition based on non-exist and zero length.
How to verify it
Run verification script when table contains empty value
890f32f LLDPLocalSystemDataUpdater Exception Log Handled (#249)
2151731 Handle error seen on system where vlan interface map is not present (#246)
c6141c7 [build] use Azure.sonic-buildimage.official.vs pipeline as artifact source (#248)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
ASN range is from 1 to 4294967295, need to remove invalid ASN.
How I did it
Update unit test and replace ASN 0.
How to verify it
Run unit test for sonic-config-engine.
Signed-off-by: Gang Lv ganglv@microsoft.com
In order to include the following commit:
c752457 [PBH] Implement Edit Flows (Azure/sonic-utilities#2093)
sonic-utilities
f70dc27 [techsupport] Handle minor fixes of TS Lock and update auto-TS (#2114)
51d3550 Fix issues in clear_qos (#2122)
6d3aa1e [GCU] Optimizing moves by adding generators for keys/tables (#2120)
65a5a6b Fixing get port speed when oper status is down (#2123)
c752457 [PBH] Implement Edit Flows (#2093)
827358f [debug dump] dump interface module added (#2070)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide lanes for port table.
How I did it
Update port config file.
How to verify it
Run sonic-cfggen unit test,
Use below PR to verify
#10228
Signed-off-by: Gang Lv ganglv@microsoft.com
*[Submodule update] sonic-py-swssdk
78f167e4728f939712b3f3ea550949e2ea675fec With the changes in PR:https://github.com/Azure/sonic-buildimage/pull/5289 access to redis unix socket is given to the redis group members. Many of sonic-util commands (especially in multi-asic) case use redis unix socket to connect to DB and thus those comamnd fails without providing sudo. This PR is continuation of PR: https://github.com/Azure/sonic-buildimage/pull/7002 where we default to use TCP for Redis if user is not root
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
To take the following into sonic-buildimage
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
[sonic-swss-common](https://github.com/Azure/sonic-swss-common)
```
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
556f4ad Add SAI copy action to ACL schema (#591)
db18c3a Fix bitwidth of mac address in SAI ACL schema (#590)
e9442bb [ConfigDBPipeConnector]: Added set_entry API (#586)
6c007c0 Update README for gmock (#562)
```
[sonic-linkmgrd](https://github.com/Azure/sonic-linkmgrd)
```
83dfc99 Enforce uniform file/class naming convention (#52)
83004bf Shutdown ICMP heartbeats when default route state is missing and ToR is in `auto` mode (#44)
b81ea31 Add `LinkProberStateMachineActiveActive` (#47)
c43cf7a Decrease link probing interval after switchover to better determine the overhead of a toggle (#43)
2239fbe Enhance clang format (#46)
```
#### How I did it
* Advanced submodules pointers
#### How to verify it
1. make configure PLATFORM=mellanox
2. make target/sonic-mellanox.bin
Why I did it
dhcp_server is introduced, and need to update yang model.
How I did it
Update yang models and add unit test.
How to verify it
Run unit test for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
1ccda8d MACsec in Gearbox (#993)
7a2b824 Update SAI submodule (#1015)
418d5fb Add pre match logic for lag member (#1008)
Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com>
#### Why I did it
When too many user login concurrently and run commands, SONiC may kernel panic on some device which has very limited memory.
#### How I did it
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### How to verify it
Manually validate the j2 template can generate correct config file.
#### Which release branch to backport (provide reason below if selected)
- [x] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
#### Description for the changelog
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
sonic-config-engine unit test is using invalid switch_type
How I did it
Update xml with correct switch_type
How to verify it
Run UT for sonic-config-engine
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
To support vlan sub intf short naming format, like subport Eth8.100 for parent portEthernet8 with vlan id 100.
How I did it
Add checks to must condition to verify there is a port or portchannel with the index same as the vlan sub intf.
How to verify it
Run the unttests.
Update sonic-utilities submodule to include below commits:
510a9b9 Add date to show version (#2086)
61b1396 [sfpshow][recycle_port] sfpshow script needs to skip recycle ports (#2109)
4681697 Support command `show ip fib` and `show ipv6 fib` (#2100)
2a982a1 Update `config mirror_session` CLI to support heximal gre type value (#2095)
b25f1e1 [generic-config-updater] Add caclrule validator (#2103)
968900c [sonic-package-manager] do not mod_config for whole config db when setting init_cfg (#2055)
bf55ceb [nvgre] Added auto-generated CLI plugins and test for NVGRE Tunnel feature (#1915)
8389c81 [sonic-cli-gen] fix failure "Error: digits_class" when field "digit_class" does not exist in DB (#2054)
f71ef64 Fix import statement in mclag.py (#2073)
For Bullseye, Python 2 isn't present at all. This means that in certain
build cases (such as building something only for Bullseye), the version
file may not exist, and so the sort command would fail.
For most normal build commands, this probably won't be an issue, because
the SONiC build will start with Buster (which has both Python 2 and
Python 3 wheels built), and so the py2 and py3 files will be present
even during the Bullseye builds.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update sonic-py-swsssdk submodule to include below commits:
96c0590 [port_util] Fix issue: port_util.get_vlan_interface_oid_map should not raise exception when DB has not RIF data (#117)
96da8b9 [build] pin pytest-azurepipelines version (#119)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/2049
from caclmgr:
- PRIORITY is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L548))
- PACKET_ACTION is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L581))
I think PRIORITY is a required field for ACLs not only CTRLPLANE ACLs
#### How I did it
Check code.
#### How to verify it
Unit-test
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
To fix https://github.com/Azure/sonic-buildimage/issues/9643
#### How I did it
Instead of ast.literal_eval added python2 compat code for json strings unicode -> str convertion.
We need python2 compatibility since py2 sonic config engine (buster/sonic_config_engine-1.0-py2-none-any.whl target) is still included into the build (ENABLE_PY2_MODULES flag is set for buster). Once we abandon buster and python2, this compat and ast.literal_eval could be cleaned up all through the code base.
#### How to verify it
run steps from the linked issue
Why I did it
support to collect version when purging debian package
Support to collect version multiple times
How I did it
Add the collection action before purging.
Updating sonic-snmpagent submodule with the following commits
dae8146 [ci]: Support code diff coverage
6bd51c4 Fix: LAG counters, if LAG don't have L3 interface
2654f4a Fix snmp agent Initialize config DB multiple times issue
#### Why I did it
When change pycommon to use swsscommon UT failed in sonic-snmpagent, need submodule update with UT issue fix.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
[ci]: Support code diff coverage
Fix: LAG counters, if LAG don't have L3 interface
Fix snmp agent Initialize config DB multiple times issue
#### A picture of a cute animal (not mandatory but encouraged)
Updating sonic-utilities sub module with the following commits
b00b870 [build] stop vstest in the Azure pipeline
2c56e92 [GCU] Marking fields under BGP_PEER_RANGE, BGP_MONITORS as create-only
6289987 Fix sonic-installer failure due to missing import
45e6ac1 [show] add support for hwstatus in show muxcable status
93384ed Try get port operational speed from STATE DB
483fc6e [techsupport] Added a lock to avoid running techsupport in parallel
398da58 Validation check correction while adding a member to PortChannel
a8a7edb [generate_dump] exclude mft and mlx folders from /etc
1cf1d03 Fix UT failed cause by change pycommon to use swsscommon
#### Why I did it
PR https://github.com/Azure/sonic-utilities/pull/1825 added validation for the input of `config mirror session add`, and only decimal value is accepted.
An issue https://github.com/Azure/sonic-buildimage/issues/10096 was raised to suggest accepting HEX value as well, and the suggestion makes sense to me.
To accept HEX value for GRE type, and keep backward compatibility as well, I updated the YANG model to support both decimal and hexadecimal input for GRE type.
#### How I did it
Update the regex for GRE type.
#### How to verify it
Verified by UT
```
platform linux -- Python 3.9.2, pytest-6.0.2, py-1.10.0, pluggy-0.13.0
rootdir: /sonic/src/sonic-yang-models
plugins: pyfakefs-4.5.4, cov-2.10.1
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py . [100%]
========================================================================================== 3 passed in 2.53s ==========================================================================================
```
#### Description for the changelog
Update YANG model for mirror session to support decimal value for GRE type.
f00efef Longxiang Lyu Wed Mar 16 09:12:46 2022 +0800 Add a command line option to store logs into a separate file (#41)
ff2e67d Longxiang Lyu Tue Mar 15 09:10:59 2022 +0800 Add default port cable type (#39)
ebbb4d8 Jing Zhang Mon Mar 14 15:41:11 2022 -0700 Prevent switching MUX to "Unknown" (#36)
c779b8f Longxiang Lyu Thu Mar 10 21:35:11 2022 +0800 [nonfunctional] Use LinkProberStateMachineBase (#38)
b9fedd0 Longxiang Lyu Wed Mar 9 13:03:58 2022 +0800 [NONFUNCTIONAL] Add LinkProberStateMachineBase (#37)
bedd42b Longxiang Lyu Wed Mar 9 10:03:00 2022 +0800 Add .clang-format file to format code (#28)
9fe4fc6 Guohan Lu Thu Mar 3 17:51:43 2022 -0800 [doc]: add lgtm badge in README.md
c1249d9 Longxiang Lyu Wed Mar 2 18:05:18 2022 +0800 Enable lgtm (#33)
b8514c6 Longxiang Lyu Wed Mar 2 13:34:39 2022 +0800 Collect port cable type to use corresponding state machine (#31)
9b59ef9 Longxiang Lyu Wed Mar 2 07:19:33 2022 +0800 Improve make clean (#32)
#### Why I did it
Fixing issue https://github.com/Azure/sonic-buildimage/issues/9991
The ACL RULE table field ETHER_TYPE can accept both hex as well as decimal values. However yang model didn't allow decimal values. Fixed it to allow decimal values (same pattern as in hex (1536-65535)
#### How I did it
Updated yang model to handle decimal values
#### How to verify it
Added UT to verify it.
#### Why I did it
```
Update submodule sonic-restapi
bd97dfe Fix urllib3 CVE-2021-33503 issue (#104)
f159bfa Upgrade the containers to be based on Debian Buster (#103)
a1830c1 (origin/201911) Fix OpenAPI spec to be readable by autorest (#101)
```
#### Why I did it
Moved Configuration.md from swss to yang folder. The configuration schema should be present along with yang models and when users add yang model they could update configuration document as well.
Update sonic-swss with the following changes:
29d5d8da Use abort instead of exit in case calling SAI API failure (#2170)
12f980c8 Fix issue config qos reload causing orchagent aborted via tracking dependencies among QoS tables (#2116)
6e5ed1c0 [chassis][syncd][sai] Adjusting response timeout during syncd init (#2159)
0a99f546 Try get port operational speed from STATE DB (#2119)
828cccfe [crm] Use sai_object_type_get_availability() API to get counters (#2098)
18c73a19 Allow IPv4 link-local nexthops (#1903)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
To implement blocking feature state change.
- How I did it
Record the actual feature state in STATE DB from hostcfg.
- How to verify it
UT + verification by running on the switch and checking STATE DB.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
e56e9b4 Fix CVE-2021-3121 warning (#96)
bf1be4f [ci]: Support code diff coverage threshold 50% (#94)
64e516c Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation (#80)
e426388 [ci]: Support azp code coverage (#87)
* fix allow list issue
Signed-off-by: stormliang <stormliang@microsoft.com>
* add the ipaddress in the install list
* add unit test
Co-authored-by: Ubuntu <azureuser@SONIC-SH-STORM-02.5pu3m0fajw1edcfltykk1gauxa.gx.internal.cloudapp.net>
Why I did it
Failed to remove part of configuration of bgp allowed prefix list. The details in #10141
How I did it
There are two issues:
In FRR, ipv6 default route is ::/0, but in the configuration, it is 0::/0, string comparison would be false, but why ipv4 failed to remove the allowed prefix list, ipv6 works? Looks into next one for the answer.
The current managers_allow_list doesn’t support removal part of the prefix list. But why IPv6 works in 1? It is because the bug for the IPv6 default route comparison, it would do the update no matter what is the operation (the code will compare the prefix list in the FRR and configuration db, if all configurations in db are presented in FRR, it do nothing, otherwise it will update the prefix list based on the configuration from db).
How to verify it
Follow the step in #10141
47c243e [show][muxcable] fix the sudo access error for show muxcable metrics (#2083)
f872516 [muxcable][show] enhance show mux status to show last switchover time (#2067)
d440df7 [warmboot] Migrate 10G ports during warm-reboot on s6100 (#2064)
494c6d7 [counterpoll] Display the correct default poll interval for watermark counters (#2082)
499988e [show][config] add muxcable command line support for retrieve / reset ICMP packet loss data (#2046)
8b01d3e Remove the warning message appear when there are no ports on CONFIG DB (#2050)
ed6e66e [GCU] Supporting Groupings during path-xpath translation (#2044)
25b3455 [ci] Use official build debian pkg instead and parameterize source branch (#2079)
Why I did it
Config db schema generated by minigraph can’t pass yang validation, deployment_id can’t be none for yang validation.
How I did it
Update minigraph.py, skip deployment_id with None value
How to verify it
Run UT for sonic-config-enginue.
Run command 'sonic-cfggen -m tests/multi_npu_data/sample-minigraph-noportchannel.xml -p tests/multi_npu_data/sample_port_config-3.ini -n asic3 --print-data'.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Desired the log message destination to be syslog and it misses the critical info.
How I did it
Non logical code changes only.
Logging update, just for one message only
a) The log message is directed to /var/log/syslog, instead of /var/log/auth.log
b) Include user alias in the message
How to verify it
Pick a user alias that has not logged into the switch yet
Add this alias to /etc/tacplus_user
Attempt to login as that user
Look for the error message in /var/log/syslog
e.g. "Feb 18 19:16:41.592191 sonic ERR sshd[5233]: auth fail: Password incorrect. user: user_xyz"
Why I did it
Smartmontools 6.6 has an issue with reading SMART info of nvme SSD
Smartmontools can be installed with apt-get, no need to build and install
How I did it
Use apt-get to install smartmontools 7.2-1
Remove previous make files for smartmontools 6.6
How to verify it
verify with "smartctl" can read out correct SMART info on NVME ssd.
verify "show platform ssdhealth" can still work
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Multi-asic platform add aisc_port_name and role to PORT table, and port_index range is changed.
How I did it
Update sonic-port.yang, add asic_port_name and role, and remove range limitation.
How to verify it
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
ACL doesn't have mirror related action
How I did it
Add 'MIRROR_INGRESS_ACTION' and 'MIRROR_EGRESS_ACTION' to sonic-acl.yang.j2
How to verify it
Run the YANG model unit tests
Signed-off-by: Gang Lv ganglv@microsoft.com
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
end2end test is blocked by Yang model for AAA login pattern.
#### How I did it
Add pattern to AAA yang models.
#### How to verify it
Run UT for sonc-yang-models.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix#9713
#### A picture of a cute animal (not mandatory but encouraged)
ce72b0d Longxiang Lyu Thu Feb 24 06:05:12 2022 Put handler member functions as virtual in base (#30)
ef59e4f Jing Zhang Fri Feb 25 11:38:28 2022 Incrementing tolerance on mux state inconsistency (#27)
2d12892 Longxiang Lyu Wed Feb 16 03:32:06 2022 Rename LinkManagerStateMachine to ActiveStandbyStateMachine (#26)
f38634c Jing Zhang Thu Feb 17 17:23:56 2022 Update log level for mux probing and mux state chance (#23)
a8434dd Jing Zhang Thu Feb 17 17:21:01 2022 Handle xcvrd crashing scenarios (#22)
2ebdb2b Longxiang Lyu Mon Feb 14 13:26:07 2022 [make] Enable make extra includes (#24)
- Why I did it
NVGRE Tunnel feature extends the Config DB with new tables. These tables require a new YANG model.
- How I did it
Added a new YANG model sonic-nvgre-tunnel.yang
- How to verify it
Added YANG test cases.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Why I did it
During warm-reboot and fast-reboot the below error logs appear
Feb 3 22:05:15.187408 r-lionfish-13 ERR container: docker cmd: kill for nat failed with 404 Client Error for http+docker://localhost/v1.41/containers/nat/json: Not Found ("No such container: nat")
The container command when called for local mode doesn't check if it is enabled before calling docker kill which throws the above errors.
b6ca76b482/scripts/fast-reboot (L699)
How I did it
Checking feature state if local mode and returning error exit code along with valid debug message.
How to verify it
Manually tested with warm-reboot and fast-reboot
Added UT to verify it.
Why I did it
amrhf build fails while building sonic-config-engine whl package
https://dev.azure.com/mssonic/be1b070f-be15-4154-aade-b1d3bfb17054/_apis/build/builds/77089/logs/9
The reason for the failure is due to the fact that there is a new line generated at the top of the file in buffer config test cases while building for broadcom based platform and this issue is not seen in Marvell based platforms.
How I did it
Removed the new line for all the buffer test cases as there is no need to add it and accordingly changed the buffer_config.j2 where the new line is generated.
This change is adding asic_name, switch_id, switch_type and max_cores to sonic-device_metadata.yang
This should fix issue #9575
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
Why I did it
end2end test is blocked by Yang model for BGP_PEER_RANGE.
How I did it
Add new yang models.
How to verify it
Run UT for sonc-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
In the recent minigraph changes we add separate BGP session configuration for V4 and V6 internal VoQ neighbors.
This PR is adding different Peer groups for V4 and V6 neighbors
How I did it
Add VOQ_CHASSIS_V4_PEER and VOQ_CHASSIS_V6_PEER groups
Add extra Unit tests
How to verify it
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
swsscommon.ConfigDBConnector does not automatically close connection when the instance is recycled by python. So, it should not create this instance each time calling check_services. It will cause error like Failed to read from file /var/run/hw-management/led/led_status_capability - OSError(24, 'Too many open files')
- How I did it
Only connect DB once in init
- How to verify it
Manual test
Signed-off-by: Ze Gan <ganze718@gmail.com>
b9337dc (HEAD, origin/master, origin/HEAD) [vslib]: Fix MACsec bug in SCI and XPN (#1003)
edbceb9 [syncd][vslib] Keep new warm boot discovered SERDES objects (#985)
af5c156 Fix build issues on gcc-10 (#999)
1445cd5 update SAI submoule (#1001)
48fe704 [ci] pipeline fixes for VS test (#1002)
f484cf9 Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
5d0b22d Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
1b8ce97 (origin/202111) [pipeline] Download swss common artifact in a separated directory (#995)
7a2e096 Change sonic-buildimage.vs artifact source from CI build to official build. (#992)
* Update sonic-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* update swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Update submodule update-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
```
Commits on Jan 31, 2022
[sonic-package-manager] implement blocking feature state change (#2035)
Commits on Feb 12, 2022
[ci] pipeline fixes for VS test (#2059)
Commits on Feb 14, 2022
[ci] allow download partially succeeded suilds for sonic-swss-pytests…
[build] allowPartiallySucceededBuilds true in the step of download so…
Commits on Feb 16, 2022
[config] Fix snmpagentaddress doesn't support the uppercase letters f…
Commits on Feb 17, 2022
[ci] Fix pipeline on build_and_install_module (#2074)
Enable diff coverage and set the threshold to 50% (#2061)
Commits on Feb 18, 2022
check for adding default vlan attempt added (#2075)
[GCU] Adding unit-test where path and ref paths are under the same YA…
[GCU] Turning port admin down before some critical port changes (#1998)
Commits on Feb 20, 2022
show_platfom_info not run for simx (#2042)
[aclshow] fix aclshow when clear is called before counters are popula…
```
#### Why I did it
1. Fix Build exception [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73911&view=logs&jobId=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&j=cef3d8a9-152e-5193-620b-567dc18af272&t=ac3bce9f-b126-5a26-3fee-28ce0ec1679d)
```
2022-02-19T01:54:23.4200556Z ImportError: cannot import name 'soft_unicode' from 'markupsafe' (/usr/local/lib/python3.8/dist-packages/markupsafe/__init__.py)
```
This is because Jinja2 uses MarkupSafe without specifying an upper limit to the version, MarkupSafe version that was released today removed 'soft_unicode'. So now Jinja2 is complaining.
Related issues:
https://github.com/pallets/jinja/issues/1591https://github.com/aws/aws-sam-cli/issues/3661
2. Reverts #9136
Fixing build failures in SONiC utils [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73784&view=logs&jobId=83516c17-6666-5250-abde-63983ce72a49&j=83516c17-6666-5250-abde-63983ce72a49&t=6177235f-d4f1-5f72-835a-90ebb93a1784)
One of the errors:
```
TestPathAddressing.test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths
self = <tests.generic_config_updater.gu_common_test.TestPathAddressing testMethod=test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths>
def test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths(self):
# Arrange
path = "/PORT/Ethernet0"
expected = [
"/ACL_TABLE/NO-NSW-PACL-V4/ports/0",
"/VLAN_MEMBER/Vlan1000|Ethernet0",
]
# Act
actual = self.path_addressing.find_ref_paths(path, Files.CROPPED_CONFIG_DB_AS_JSON)
# Assert
> self.assertEqual(expected, actual)
E AssertionError: Lists differ: ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0'] != ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
E
E First list contains 1 additional elements.
E First extra element 1:
E '/VLAN_MEMBER/Vlan1000|Ethernet0'
E
E - ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0']
E + ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
```
The VLAN_MEMBER backlink (can be called referrer link or ref link) is not found.
Issue introduced by https://github.com/Azure/sonic-buildimage/pull/9136
I don't know how this PR passed the build system, it should have failed.
Known YANG issue https://github.com/Azure/sonic-buildimage/issues/9312
#### How I did it
The import to `sonic-vlan` is breaking the build
```
import sonic-vlan {
prefix vlan;
}
```
I am not sure if that's the only issue, so I think reverting the whole PR should be the safer option.
#### How to verify it
Ran sonic-utils tests locally.
sonic-swss-common:
[ci] Set diff coverage threshold to 50% (#567)
Added NVGRE tunnel related tables (#549)
Add option to suppress logging (#566)
[TableBase] Make channel name from both table name and database ID (#568)
Revert "[TableBase] Make channel name from both table name and database ID (#568)" (#574)
sonic-py-swsssdk:
Add option to suppress warnings when querying Redis (#115)
- Why I did it
NVGRE Tunnel feature extends the Config DB with new tables. These tables require a new YANG model.
- How I did it
Added a new YANG model sonic-nvgre-tunnel.yang
- How to verify it
Added YANG test cases.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Why I did it
Radvd.conf.j2 template creates two copies of the vlan interface when there are more than one ipv6 address assigned to a single vlan interface. Changed the format to add prefixes under the same vlan interface block.
How I did it
Modifies radvd.conf.j2 and added unit tests
How to verify it
Configure multiple ipv6 address to the same vlan, start radvd
Unit test will check if radvd.conf with multiple ipv6 addresses is formed correctly
#### Why I did it
To bump the Thrift version to 0.14.1
- To avoid [CVE-2020-13949](https://nvd.nist.gov/vuln/detail/CVE-2020-13949)
- to fix some dependencies issues
#### How I did it
- rename `src/thrfit_0_13_0` to `src/thrift_2` to remove version number in the path. (`src/thrift` contains rules to build thrift 0.11.0 )
- Add thrift sources as submodule as there are no prepared debian packages for version >0.13.0 on [debian.org](https://packages.debian.org/search?searchon=sourcenames&keywords=thrift)
- Added patches with fixes for original thrift debian rules:(remove unneeded packages, fix multi job build)
#### How to verify it
```
BLDENV=buster make -f Makefile.work target/debs/buster/libthrift-dev_0.14.1_amd64.deb
```
Updates include the following changes in order to support new Mellanox platforms and drivers (Azure/sonic-linux-kernel#259)
10ef390 Update kconfig to support / enable newly backported mellanox patches.
6a949e1 Add backported patches for Mellanox hw-mgmt V.7.0020.1300
e1913f7 Rename and reformat patch headers
#### Why I did it
Fixing the issue https://github.com/Azure/sonic-buildimage/issues/9915
#### How I did it
Added 'not-provisioned' as a supported value for type field in DEVICE_METADATA type. This value is set during initial ZTP bring up
#### How to verify it
Added UT to verify it.
Update submodule sonic-utilities that contains the following commits:
[build] allowPartiallySucceededBuilds: true (#2043)
[system-health] Remove booting stage in system health service (#2022)
[GCU] Mark children of bgp_neighbor as create-only (#2008)
[generic_config_updater] Minor update - No logical code change (#2028)
[generic-config-updater] Handle failed service restarts (#2020)
[debug dump] Missing Dict Key handled in the MatchOptimizer (#2014)
[Auto Techsupport] Added Event Driven TS to Command Reference (#1985)
#### Why I did it
PR9611 - sonic-scheduler.yang pattern issue
#### How I did it
Modified the scheduler name pattern string to accept any string
#### How to verify it
Sonic yang tests
53c630b [CoPP] Add always_enabled field to coppmgr logic ([minigraph]: Add PORTCHANNEL_MEMBER configurations #2034)
adcf69d [cbf] Fix cbf sync error ([aboot] add SWI_DEFAULT support in boot0 #2056)
69f9ee5 fix mclagsyncd out of order initialization ([submodules] update dbsyncd and snmpagent pointers for LLDP MIB support #2112)
#### Why I did it
If the grouping is in the same file in the module, fetching the grouping fails
#### How I did it
fixing the `uses_module_name` when the grouping is under the same file
#### How to verify it
Enabled a grouping under the same file which is `lldp`, there is a test in sonic-yang-mgmt that translates `sample-config-db` into yang format. This test passes with grouping in `lldp` used.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Include sonic-bgp-monitor to setup.py so it gets included in /usr/local/yang-models when installing the package
#### How I did it
#### How to verify it
install the package
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Enable dbgsym package for dhcpmon.
Allow CFLAGS and LDFLAGS from environment variables to be used
in the dhcp6relay build. This makes sure that the -O2 flag from
dpkg-buildflags gets used.
Finally, enable all hardening flags in dpkg-buildflags for
dhcp6relay and dhcpmon. The change from the default set of flags is that
during linking, immediate binding of symbols is done instead of lazy
binding.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### How I did it
Added mclag sonic yang file for the MCLAG enhancements as per HLD: Azure/SONiC#596
#### How to verify it
try rest APIs
#### Description for the changelog
Added mclag sonic yang
- Why I did it
For SYSTEM READY feature. Currently, there is a booting stage in system health service to indicate that the system is loading SONiC component. This booting stage is no longer needed because SYSTEM READY feature will treat that stage as system "NOT READY".
- How I did it
1. Remove booting stage
2. Adjust unit test cases
- How to verify it
Manual test, Unit test, sonic-mgmt Regression
Why I did it
the strcpy and buffer allocation is not safe, it corrupts 1 byte on the stack. Depending on the memory layout, it may or may not cause issue immediately.
message type is not validated before updating the counter. Which could cause segment fault.
How I did it
Remove the unsafe strcpy, use config->interface.c_str() instead.
Check message type before updating counters.
How to verify it
The issue (1) caused segment fault on a specific platform. The fix was validated there. Issue (2) was precautionary. Added log in case it triggers.
Why I did it
Minigraph parser added a new field 'cluster' to device_metadata, and then yang validation is blocked.
How I did it
Add 'cluster' to device_metadata yang models.
How to verify it
Run UT for sonc-yang-models.
Use minigraph parser to generate ConfigDB schema and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
* [y_cable] Support for initialization of new Daemon ycable to support
ycables
This PR also adds the commit in sonic-platform-daemons
94fa239 [y_cable] refactor y_cable to a seperate logic and new daemon from xcvrd (#219)
Why I did it
This PR separates the logic of Y-Cable from xcvrd. Before this change we were utilizing xcvrd daemon to control all aspects of Y-Cable right from initialization to processing requests from other entities like orch,linkmgr.
Now we would have another daemon ycabled which will serve this purpose.
Logically everything still remains the same from the perspective of other daemons.
it also take care aspects like init/delete daemon from Y-Cable perspective.
How I did it
To serve the purpose we build a new wheel sonic_ycabled-1.0-py3-none-any.whl and install it inside pmon.
We also initalize the daemon ycabled which serves our purpose for refactor inside pmon
How to verify it
Ran the changes with an image for dualtor tests on a 7050cx3 platform
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Update the sonic-swss submodule. The following are new commits in the submodule:
6cb43ee [p4orch] Fix handlePortStatusChangeNotification status deserialize (#2111)
863f0f1 [azp]: Enable PR diff coverage (#2083)
bf4cd4a Fix the unsafe usage of strncpy in portsorch.cpp (#2110)
c1b4b40 support port isolation group in BFN platform (#1940)
Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com>
#### Why I did it
src\tacacs\bash_tacplus\debian\rules file mode is 644, and debian build will change it to 755, which will cause image version contains 'dirty'
#### How I did it
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### How to verify it
Check the image version not contains dirty
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [*] 202111
#### Description for the changelog
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
ACL have ACCEPT action indeed, but yang doesn't support it.
How I did it
Add 'ACCEPT' enum to sonic-types.yang.j2
How to verify it
Run the YANG model unit tests
Why I did it
ConfigDB schema generated by minigraph parser can't pass yang validation.
How I did it
Modify minigraph.py, and use 'state' to replace 'status'.
How to verify it
Run UT for sonic-config-engine.
Use minigraph parser to generate ConfigDB schema, and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
end2end test is blocked by Yang model for BGP monitor.
How I did it
Create new yang files for BGP monitor, and add UT.
How to verify it
Follow the steps in #9711.
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
c4127c2 [psud] Fix PSU log issue (#235)
07542cb [pmon][xcvrd]xcvrd process show backtrace on the internal port. (#233)
3e432e7 [Y-Cable] Increased unit test coverage of y_cable_helper.py (#229)
7c363f5 [ledd] prevent led crash on recirc port event (#232)
e9ccd82 [sonic-platform-daemons] fix dependency issue on py2 wheels by correcting the path (#234)
2b0acfb [sfp-refactoring] xcvrd: add initial support for CMIS application initialization (#217)
```
d9f3afe [fdbshow] Adding more options for fdbshow and show mac (#1982)
902e14f Revert "Revert "[Barefoot] Added CLI to list/set P4 profile (#1951)"" (#2019)
5cc9dd5 Revert "Revert "[sonic-package-manager] support sonic-cli-gen and packages with YANG model (#1650)" (#1972)" (#1994)
```
As part of this, update the isc-dhcp package to match the Bullseye
version (this fixes some compile errors related to BIND), clean up some
of the build dependencies and runtime dependencies for debian packaging,
and use the default Boost version to compile against instead of
explicitly saying using 1.74.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
[Submodule update] sonic-swss
c78aa1b81a3a9001669746067ebbe40b4485f71d (HEAD -> master, origin/master, origin/HEAD) OA changes to support Ordered ECMP and DVS test for same. (#2092)
b4b00031378a6ce303b779159e718d6d20790c11 Handling Invalid CRM configuration gracefully (#2109)
d240cb2d356ec17baa464455f37f88ac5dbc441a [Mellanox] '_8lane' not added to Mellanox 5xxx models with 800G (#2090)
8fd6e488d2a3696b9cfe352a9119c86f0f33e6dc [pfcwd] Add vs test infrastructure (#2077)
b96ee5438b8bf08980846ee84ff69e7ba267b0dc [vnetorch] Advertise vnet tunnel routes (#2058)
[submodule update] sonic-sairedis
d5866a3dccfb3bc50853d740d54203b5cae61eed (HEAD -> master, origin/master, origin/HEAD) [vslib]: fix create MACsec SA error (#986)
f36f7ce6236ae97526e15f00e7688ccced7c0454 Added Support for enum query capability of Nexthop Group Type. (#989)
323b89b14995a84bd6539c8a1df00b77d251f99e Support for MACsec statistics (#892)
26a8a1204e873109537c81462ad1457cf38c2f9e Prevent other notification event storms to keep enqueue unchecked and drained all memory that leads to crashing the switch router (#968)
0cb253a42cd0a641b8e0a3c6a4a54e5397dd8c2d Fix object availability conversion (#974)
457e94d51 [macsec_linux]: Fixbug cannot dump the PN due to type error (#42)
f7c073323 Disable P2P module (#41)
7b3b777e2 [ci]: use native arm64 and armhf build pool (#40)
d4e91d66c [sonic_operator]: Increase wait timeout (#39)
43611ef88e [sonic_operators]: Add log in sonic operators (#43)
Signed-off-by: Ze Gan <ganze718@gmail.com>
What I did:-
Enhanced minigraph parser to parse interface name associated with static route nexthop
Why I did:-
One of the use case to support interface name is Chassis Packet. For Chassis Packet we have Static Routes configured to route traffic across line-card. If the FRR programs static route without the interface name then in case if the ip interface that is associated with the nexthop goes down FRR resolves static route nexthop over the default route as we have FRR config ip nht-resolve-via-default which causes undesired behavior. Having interface name with Static Route prevents recursive lookup on default route.
How I verify:
Updated unit-test cases
Manual verification
#### Why I did it
AAA yang model is not up to date.
#### How I did it
Add fallback and trace field, and replace boolean_type
#### How to verify it
Run UT for sonic_yang_models.
Follow the steps from #9710
Why I did it
Config db schema generated by minigraph can’t pass yang validation, bgp_asn must not be None.
How I did it
Update sampe-voq-graph.xml to add bgp_asn.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m tests/sample-voq-graph.xml -p tests/voq-sample-port-config.ini --print-data', and check bgp_asn.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Update the sonic-swss submodule. The following are new commits in the submodule.
6dae6b8 Add initial value for weight in overlay nexthops (#2096)
d3cd402 [p4rt-tests] Bind response consumer to appl_state_db (#2105)
43e54e5 Fix armhf buildimage artifacts not found issue (#2107)
How I did it
Update the swss submodule pointer.
Provide the changes required for supporting the "show-techsupport" command via the SONiC Management Framework front end mechanisms (CLI, REST, and gNOI). The Management Framework functionality implemented by this PR improves on the the capabilities currently provided by the SONiC Click CLI interface via the "show techsupport" command by providing the following additional features:
- User-friendly "help" information describing command syntax details for CLI invocation.
- Ability to invoke the command via REST and gNOI mechanisms.
Unit test results are attached to this PR.
Fixes#9561Fixes#9570Fixes#9563
Partial fix for #9556
#### Why I did it
- Attributes for dual ToR configs lack YANG model support
#### How I did it
- Extend YANG tests to cover dual ToR use cases
- Extend YANG model to cover dual ToR use cases
- Reduce the default log level to warning so only test failures are printed
#### How to verify it
- Run the YANG model unit tests
Why I did it
Add YANG model file for table VLAN_SUB_INTERFACE
How I did it
Add YANG model file sonic-vlan-sub-interface.yang to describe data structure
modify existing unit-test to cover vlan sub interface
How to verify it
Build sonic-yang-models and sonic-yang-mgmt without errors
#### Why I did it
It should be handled by `ConfigDBConnector.typed_to_raw()`.
This is a bug for `sonic-cfggen -m --print-data` only
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {
"NULL": "NULL"
},
"PortChannel0002|Ethernet116": {
"NULL": "NULL"
},
"PortChannel0003|Ethernet120": {
"NULL": "NULL"
},
"PortChannel0004|Ethernet124": {
"NULL": "NULL"
}
},
```
But not appears in `sonic-cfgen -d --print-data`.
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {},
"PortChannel0002|Ethernet116": {},
"PortChannel0003|Ethernet120": {},
"PortChannel0004|Ethernet124": {}
},
```
Tested in a T0 KVM.
On a multi-asic Supervisor card, running commands like
'show interface counter' opens a confid_db connection per
namespace per interface which results in many duplicate connections
exceeding the allowed open file handles. This causes the command to fail.
Caching the connections to prevent duplicate handles.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, portchannel_member has invalid port.
How I did it
Update test minigraph to remove invalid port channel.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check port channel member.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, and there's no 'alias' field in yang model.
Minigraph parser supports 'alias' field for VLAN.
How I did it
Add 'alias' field to sonic-vlan.yang
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m xxx.xml --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, there's no Vlan31 in 'VLAN' table.
How I did it
Update test minigraph to add vlan interface.
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m tests/fg-ecmp-sample-minigraph.xml -p tests/mellanox-sample-port-config.ini --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/1871
From [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) we call `sonic-yang-mgmt` multiple times in order to check a certain change to ConfigDb is valid or not. It is expected for some changes to be invalid, so always printing errors from `sonic-yang-mgmt` makes the output hard to read.
In this PR, we are adding a way to control if logs should be printed or not.
#### How I did it
- Added `print_log_enabled` flag to sonic_yang ctor
- Converted all `print` statements to `sysLog(..., doPrint=True)`
#### How to verify it
unit-test passing means the change did not break logs.
#### Info about libyang logging
libyang provides an extensive logging logic which can support a lot of scenarios:
- ly_log_level: setting logging level
- LY_LLERR
- LY_LLWRN
- ...
- ly_set_log_clb: setting log callback to customize the default behavior which is printing the msgs
- ly_log_options: setting logging options
- LY_LOLOG: If callback is set use it, otherwise just print. If flag is not set, do nothing.
- ...
For more info refer to:
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__logopts.html#gaff80501597ed76344a679be2b90a1d0a
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__log.html#gac88b78694dfe9efe0450a69603f7eceb
#### What's next?
Consume the new flag `print_log_enabled` in [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) to reduce the logging clutter.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Updating ztp submodule to include the below commits
f7dd3c5 [sonic-ztp]Fixing build failure after bullseye integration (#30)
9218e16 Replace swsssdk.ConfigDBConnector and SonicV2Connector with swsscommon(#28)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
691c37b7 [Route bulk] Fix bugs in case a SET operation follows a DEL operation in the same bulk (Azure/sonic-swss#2086)
a4c80c3d patch for issue Azure/sonic-swss#1971 - enable Rx Drop handling for cisco-8000 (Azure/sonic-swss#2041)
71751d10 [macsec] Support setting IPG by gearbox_config.json (Azure/sonic-swss#2051)
5d5c1692 [bulk mode] Fix bulk conflict when in case there are both remove and set operations (Azure/sonic-swss#2071)
8bbdbd2b Fix SRV6 NHOP CRM object type (Azure/sonic-swss#2072)
ef5b35f3 [vstest] VS test failure fix after fabric port orch PR merge (Azure/sonic-swss#1811)
89ea5385 Supply the missing ingress/egress port profile list in document (Azure/sonic-swss#2064)
81234373 [pfc_detect] fix RedisReply errors (Azure/sonic-swss#2040)
b38f527a [swss][CRM][MPLS] MPLS CRM Nexthop - switch back to using SAI OBJECT rather than SWITCH OBJECT
ae061e55 create debug_shell_enable config to enable debug shell (Azure/sonic-swss#2060)
45e446d9 [cbf] Fix max FC value (Azure/sonic-swss#2049)
b1b5b297 Initial p4orch pytest code. (Azure/sonic-swss#2054)
d352d5a9 Update default route status to state DB (Azure/sonic-swss#2009)
24a64d65 Orchagent: Integrate P4Orch (Azure/sonic-swss#2029)
15a3b6ca Delete the IPv6 link-local Neighbor when ipv6 link-local mode is disabled (Azure/sonic-swss#1897)
ed783e1f [orchagent] Add trap flow counter support (Azure/sonic-swss#1951)
e9b05a31 [vnetorch] ECMP for vnet tunnel routes with endpoint health monitor (Azure/sonic-swss#1955)
bcb7d61a P4Orch: inital add of source (Azure/sonic-swss#1997)
f6f6f867 [mclaglink] fix acl out ports (Azure/sonic-swss#2026)
fd887bf8 [Reclaim buffer] Reclaim unused buffer for dynamic buffer model (Azure/sonic-swss#1910)
92589789 [orchagent, cfgmgr] Add response publisher and state recording (Azure/sonic-swss#1992)
3d862a72 Fixing subport vs test script for subport under VNET (Azure/sonic-swss#2048)
fb0a5fd8 Don't handle buffer pool watermark during warm reboot reconciling (Azure/sonic-swss#1987)
16d4bcdb Routed subinterface enhancements (Azure/sonic-swss#1907)
9639db78 [vstest/subintf] Add vs test to validate sub interface ingress to a vnet (Azure/sonic-swss#1642)
Signed-off-by: Stephen Sun stephens@nvidia.com
- Why I did it
The feature state can be a jinja template, like in this file - https://github.com/Azure/sonic-buildimage/blob/master/files/build_templates/init_cfg.json.j2#L39.
Without this change it is not possible to validate a configuration file.
- How I did it
Relaxes the constraint on feature state. Feature state leaf can be any string.
- How to verify it
Run UT.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
'SYSLOG_SERVER': {'': {}, '10.0.10.5': {}, '10.0.10.6': {}},
Config db schema generated by minigraph can’t pass yang validation, server address can't be empty.
How I did it
Update test minigraph to remove wrong configuration.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and SYSLOG_SERVERS table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update test minigraph to fix interface
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check interface table and port table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update minigraph xml to add DeploymentId.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check deployment_id field.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
POLL_INTERVAL cannot be set if any of the detection/restoration times in this table is less than the POLL_INTERVAL.
#### How I did it
Add "must" constraint to make sure detection/restoration times are greater than POLL_INTERVAL.
#### How to verify it
Use apply-patch command to update POLL_INTERVAL.
Build sonic-yang-model.
Closes#7958
#### Why I did it
The previous implementation of sonic-cfggen did a simple comparison between default breakout mode in
hwsku.json and supported modes in platform.json. To set a different default speed in hwsku.json
it was required to add one more entry to supported modes in platfrom.json file:
1x10G[100G,50G] vs 1x100G[50G,10G]
The new implementation does more intelligent parsing and analysis of supported and default modes. It
allows changing default speed without adding a new entry to platform.json.
#### How I did it
Add more intelligent parsing and analysis of supported and default modes.
#### How to verify it
Run sonic-config-engine unit tests from sonic-config-engine/tests directory
#### Why I did it
Sonic yang model for BUM storm control
#### How I did it
Added yang model and the corresponding test cases.
#### How to verify it
yang model test case for storm control
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
1. Fix auditd log file path, because known issue: https://github.com/Azure/sonic-buildimage/issues/9548
2. When SONiC change to based on bullseye, auditd version upgrade from 2.8.4 to 3.0.2, and in auditd 3.0.2 the plugin file path changed to /etc/audit/plugins.d, however the upstream auditisp-tacplus project not follow-up this change, it still install plugin config file to /etc/audit/audisp.d. so the plugin can't be launch correctly, the code change in src/tacacs/audisp/patches/0001-Porting-to-sonic.patch fix this issue.
#### How I did it
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### How to verify it
Pass all UT, also run per-command acccounting UT to validate plugin loaded.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Fix issue https://github.com/Azure/sonic-utilities/issues/1962
The problem is current implementation of [sonic-yang-mgmt::find_data_dependencies](f2774b635d/src/sonic-yang-mgmt/sonic_yang.py (L518)) does not get referrers if they are using `must` statement, it has to use `leafref`.
For now we can convert `must` to `leafref` if possible. In the future we will investigate get referrers by `must` statements as well https://github.com/Azure/sonic-buildimage/issues/9534
#### How I did it
Instead of `must` use `leafref`
#### How to verify it
unit-test
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
[LLDPD] fix to port remove and immediately create a problem - on delete link events it will immediately execute delete without using aggregate events mechanism.
This patch was added to LLDPD on this PR:
lldpd/lldpd#492
Signed-off-by: tomeri <tomeri@nvidia.com>
What I did:
Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter.
Why I did:-
By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
This interface type is used for recirculation on chassis.
The definition is required to prevent this interface from being
considered a physical interface in sonic-platform-common and
sonic-platform-daemon
Fixes#9326
#### Why I did it
When we try execute DPB from CLI we have error:
`libyang[0]: Invalid value "False" in "has_global_scope" element. (path: /sonic-feature:sonic-feature/FEATURE/FEATURE_LIST[name='bgp']/has_global_scope)`
The reason for this issue is that has_global_scope and other have been stored in redis database with value False or True form capital letter:
```
"FEATURE":{
"bgp":{
"auto_restart":"enabled",
"has_global_scope":"False",
"has_per_asic_scope":"True",
"has_timer":"False",
"high_mem_alert":"disabled",
"state":"enabled"
}
```
But yang model support boolean just in lowercase letters (https://datatracker.ietf.org/doc/html/rfc6020#section-9.5.1).
#### How I did it
Added boolean to sonic-types as typedef with different literal cases.
#### How to verify it
Run the command config interface breakout <breakout_mode>
**NOTE:**
To verify this fix, the following PRs that fix other problems in SONiC must be merged into master:
1) Azure/sonic-buildimage/pull/9075
2) Azure/sonic-buildimage/pull/9276
Signed-off-by: Neetha John <nejo@microsoft.com>
Bring back the changes in #9226 that were reverted. Unable to do a revert-revert.
Why I did it
Few device types were missing in the DEVICE_METADATA type field
How I did it
Added missing device types to the device metadata yang
#### Why I did it
Fixing issue #9294
#### How I did it
Updating ACL yang model
#### How to verify it
Validating issue with `config patch-apply` is fixed.
- Start a KVM
- Add file `add-ctrl-plane-tbl.json-patch ` with content:
```json
[
{
"op": "add",
"path": "/ACL_TABLE/ACTRLPLANETABLE",
"value": {
"policy_desc": "ACTRLPLANETABLE",
"services": [
"SSH"
],
"stage": "ingress",
"type": "CTRLPLANE"
}
}
]
```
- Run `sudo config apply-patch add-ctrl-plane-tbl.json-patch`
Before:
```
Patch Applier: The patch was sorted into 4 changes:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"type": "CTRLPLANE"}}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/policy_desc", "value": "ACTRLPLANETABLE"}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/services", "value": ["SSH"]}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/stage", "value": "ingress"}]
```
After:
```
Patch Applier: The patch was sorted into 1 change:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"policy_desc": "ACTRLPLANETABLE", "services": ["SSH"], "stage": "ingress", "type": "CTRLPLANE"}}]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Add the configuration for the set_owner in the `feature` yang model
#### How I did it
Add new leaf `set_pwner` to the `feature` yang model
#### How to verify it
compile `sonic_yang_mgmt-1.0-py3-none-any.whl`
#### Why I did it
Currently only IP ACL and related model is defined. Support for MAC ACL is missing. Added support for it.
#### How I did it
ACL_RULE table is added with new MAC ACL related fields namely Source MAC, Destination MAC, Ethertype (Pattern updated to match any valid Ethertypes), VLAN, PCP, DEI
#### How to verify it
Yang model tests are attached.
Why I did it
Add YANG model support for table CABLE_LENGTH
How I did it
Add the YANG model file
Add the test description file and config file
add list CABLE_LENGTH_LIST to the qos_maps_model list in sonic-yang-ext, as it has an inner list.
How to verify it
Build sonic-yang-model and sonic-yang-mgmt
- Why I did it
Fix sonic-config-engine unit test failure
- How I did it
* Do not use pytest fixture in the test since it is not compatible with unittest framework which is used by all of the rest test cases.
* Supply 2 missing files
- How to verify it
Run unit test or compile the module (when the unit test will run automatically)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
#9122
DEVICE_METADATA does not have cloudtype and region.
How I did it
Add cloudtype and region to DEVICE_METADATA.
How to verify it
Follow the steps in #9122.
Build sonic-yang-model.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### What I did
[sonic-linkmgrd][master] submodule update
6c6151b Fix unstable unit tests (state change handler wasn't invoked) (#8)
2f7dc0a support code diff coverage (#5)
83f0002 Force mux state switch to standby if triggered from Cli (#6)
signed-off-by: Jing Zhang zhangjing@microsoft.com
#### Why I did it
DPB falls due to missing POLL_INTERVAL in sonic-flex_counter yang model.
#### How I did it
Added POLL_INTERVAL leaf to ACL container in sonic-flex_counter yang model.
#### How to verify it
Run the command config interface breakout <interface> <breakout_mode>
**NOTE:**
To verify this fix, a PR ([add set_owner to feature yang](https://github.com/Azure/sonic-buildimage/pull/9075)) that fix another bug in SONiC should be merged to master.
Why I did it
Add yang model for syslog server
How I did it
Add new file sonic-syslog.yang and new files for tests
How to verify it
Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
Updated BGP Template for the case:
1. For Packet Chassis do not advertise Loopback4096 address into BGP as there is Static Route for same.
Having this route in BGP causes two level of recursion in Zebra and cause assert in Zebra
when there are many nexthop involved
2. Advertise only P2P Connected IP's into BGP (External Peers). For Packet chassis we have backend IP Interface subnet and if
they get advertised into BGP then it also causes recursion
Fix the nodesource.list cannot read issue, it is cased by the full path not used.
```
2021-12-03T06:59:26.0019306Z Removing intermediate container 77cfe980cd36
2021-12-03T06:59:26.0020872Z ---> 528fd40e60f6
2021-12-03T06:59:26.0021457Z Step 81/81 : RUN post_run_buildinfo
2021-12-03T06:59:26.0841136Z ---> Running in d804bd7e1b06
2021-12-03T06:59:29.1626594Z [91mDEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 is no longer maintained. pip 21.0 will drop support for Python 2.7 in January 2021. More details about Python 2 support in pip can be found at https://pip.pypa.io/en/latest/development/release-process/#python-2-support pip 21.0 will remove support for this functionality.
2021-12-03T06:59:34.2960105Z [0m[91m/usr/bin/sed: can't read nodesource.list: No such file or directory
2021-12-03T06:59:34.5094880Z [0mThe command '/bin/sh -c post_run_buildinfo' returned a non-zero code: 2
```
Co-authored-by: Ubuntu <xumia@xumia-vm1.jqzc3g5pdlluxln0vevsg3s20h.xx.internal.cloudapp.net>
c2aac75 [SFP-Refactor] Fix LP mode API issue (#247)
dba17c8 Firmware upgrade CLI support for QSFP-DD transceivers (#244)
cd69212 [SFP-Refactor] Implement CMIS Low Power mode (#237)
9cea07f Fix RegGroupField decode (#245)
6ae1909 Add CMIS QSFP support (#246)
c1f317d Gracefully handle CMIS APIs for passive modules (#238)
ec7335d fix for firmware functions (#243)
cf2ebe9 Fix RegBitField decode/encode (#242)
ef4f2c6 Fix SFP_CABLE_TECH_FIELD (#240)
e118644 remove time counting message in functions because function running time could be difficult to predict in unit tests (#241)
Signed-off-by: Prince George <prgeor@microsoft.com>
#### Why I did it
Created SONiC Yang model for Mirror.
Tables: MIRROR_SESSION
#### How I did it
Defined Yang models for COPP based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md
#### How to verify it
'''
============================= test session starts ==============================
platform linux -- Python 3.7.3, pytest-3.10.1, py-1.7.0, pluggy-0.8.0
rootdir: /sonic/src/sonic-yang-models, inifile:
plugins: cov-2.6.0
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py . [100%]
=============================== warnings summary ===============================
module: sonic-mirror-session
+--rw sonic-mirror-session
+--rw MIRROR_SESSION
+--rw MIRROR_SESSION_LIST* [name]
+--rw name string
+--rw type? string
+--rw src_ip? inet:ipv4-address
+--rw dst_ip? inet:ipv4-address
+--rw gre_type? string
+--rw dscp? uint8
+--rw ttl? uint8
+--rw queue? uint8
+--rw dst_port? -> /port:sonic-port/PORT/PORT_LIST/name
+--rw src_port? union
+--rw direction? string
'''
Bring in the following commit:
405f1df Use build profiles instead of distro version for Python 2 binding build (#558)
This change requires a corresponding change in this repo to set a build
profile to not build the python 2 bindings on Bullseye.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This pull request integrate audisp-tacplus to SONiC for per-command accounting.
#### Why I did it
To support TACACS per-command accounting, we integrate audisp-tacplus project to sonic.
#### How I did it
1. Add auditd service to SONiC
2. Port and patch audisp-tacplus to SONiC
#### How to verify it
UT with CUnit to cover all new code in usersecret-filter.c
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add audisp-tacplus for per-command accounting.
#### A picture of a cute animal (not mandatory but encouraged)
The BGP_VOQ_CHASSIS_NEIGHBOR keepalive and holdtime timers are
configured similar to general neighbors. Changes are done to configure
BGP_VOQ_CHASSIS_NEIGHBOR timers similar to BGP_INTENAL_NEIGBOR since voq
chassis bgp neighbors are similar to bgp internal neighbors in
multi-asic. As it is done for bgp internal neighbors, the keepalive and
holdtime timers are set to 3 and 10 seconds respectively. Also similar
to bgp internal neighbors, connection retry timer is also configured for
voq chassis bgp neighbors.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
Why I did it
Add bgpcfgd support to advertise routes.
How I did it
Make bgpcfgd subscribe to the ADVERTISE_NETWORK table in STATE_DB and configure route advertisement accordingly.
How to verify it
Added unit tests in bgpcfgd and verify on KVM about route advertisement.
* Routed subinterfae enhancements HLD #833
* Adding python API support to get routed subinterface long name to get correct parent interface for the routed subinterface.
Signed-off-by: Stephen Sun stephens@nvidia.com
Why I did it
Support zero buffer profiles
Add buffer profiles and pool definition for zero buffer profiles
Support applying zero profiles on INACTIVE PORTS
Enable dynamic buffer manager to load zero pools and profiles from a JSON file
Dependency: It depends on Azure/sonic-swss#1910 and submodule advancing PR once the former merged.
How I did it
Add buffer profiles and pool definition for zero buffer profiles
If the buffer model is static:
Apply normal buffer profiles to admin-up ports
Apply zero buffer profiles to admin-down ports
If the buffer model is dynamic:
Apply normal buffer profiles to all ports
buffer manager will take care when a port is shut down
Update buffers_config.j2 to support INACTIVE PORTS by extending the existing macros to generate the various buffer objects, including PGs, queues, ingress/egress profile lists
Originally, all the macros to generate the above buffer objects took active ports only as an argument
Now that buffer items need to be generated on inactive ports as well, an extra argument representing the inactive ports need to be added
To be backward compatible, a new series of macros are introduced to take both active and inactive ports as arguments
The original version (with active ports only) will be checked first. If it is not defined, then the extended version will be called
Only vendors who support zero profiles need to change their buffer templates
Enable buffer manager to load zero pools and profiles from a JSON file:
The JSON file is provided on a per-platform basis
It is copied from platform/<vendor> folder to /usr/share/sonic/temlates folder in compiling time and rendered when the swss container is being created.
To make code clean and reduce redundant code, extract common macros from buffer_defaults_t{0,1}.j2 of all SKUs to two common files:
One in Mellanox-SN2700-D48C8 for single ingress pool mode
The other in ACS-MSN2700 for double ingress pool mode
Those files of all other SKUs will be symbol link to the above files
Update sonic-cfggen test accordingly:
Adjust example output file of JSON template for unit test
Add unit test in for Mellanox's new buffer templates.
How to verify it
Regression test.
Unit test in sonic-cfggen
Run regression test and manually test.
* Add macsec-xpn-support iproute2 in syncd
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Polish code
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Remove useless files
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Add self-compiled iproute2 to docker sonic vs
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Enhance apt install for iproute2 dependencies
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
resolves#8979 and #9055
How I did it
Remove the file static.conf.j2,which adds the default route on eth0 from bgp docker
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
a0bff26a [acl-loader] modify acl-loader with change in STATE DB ACL capability table (#1896)
a395e284 [debug dump util] Changes for EVPN and VxLAN dump module (#1892)
02a98ef1 [debug dump util] Route Module added (#1913)
ac8382fd [generic-config-updater] Logging change just before applying it (#1934)
9ab6c515 [flex counter] Flex counter threads consume too much CPU resources. #9202 (#1925)
2ec47a59 [generic-config-updater] Handling empty tables while sorting a patch (#1923)
fdedcbf6 [fdbshow]: Handle FDB cleanup gracefully. (#1926)
e7535ae3 [sonic-cli-gen] first phase implementation of the SONiC CLI Auto-generation tool (#1644)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
What I did:
Added option 'advertise':'true'/'false' to STATIC_TALE to control whether given route need to be advertise into BGP.
How I did:
Add a route in FRR with tag (1 for advertise and 2 for not advertise)
Create Route Map to match on tag as 1 and permit
Attach route-map to redistribute static.
Minigraph option to parse advertise option of Static Route.
bb0733aa [aclorch] Add ACL_TABLE_TYPE configuration (#1982)
59cab5d9 Support for setting switch level DSCP to TC QoS map (#2023)
da21172e [aclorch] add generic AclOrch::updateAclRule() method (#1993)
4f6cb055 [Reclaiming buffer] Support reclaiming buffer in traditional model (#2011)
32d7a69e [Reclaiming buffer] Common code update (#1996)
b91d8ba7 [swss] L2 Forwarding Enhancements (#1716)
797dab41 [muxorch] Bind all ports to drop ACL table (#2027)
99929cd7 [lgtm.yml] add libgmock-dev (#2035)
8727ae5c [flex counter] Flex counter threads consume too much CPU resources #9202 (#2031)
103fdf05 Remove redundant calls to get child scheduler group during initialization (#1965)
18ea8404 [macsec]: MACsec statistics support (#1867)
0c462420 [orchagent] Flush pipeline every 1 second, not only when select will timeout (#2003)
339101cf [cbf] Add class-based forwarding support (#1963)
24a615bd Fix issue: accumulative headroom can exceed limit in rare scenario (#2020)
708e232a Test divide by zero processing path (#2028)
8f1d035c [macsecmgr]: Wait for port up before enabling macsec (#2032)
4912a770 Remove buffer drop counter when port is removed (#1860)
f9462c49 [Dynamic buffer] [Mellanox] Calculate the peer response time according to the speed (#1930)
8b5a401e Routed subinterface enhancements (#2017)
cdea5e9b Fix next hop compilation (#2025)
37c197d0 [SRV6] Sonic-swss changes for SRV6 (#1964)
f502c320 [vnetorch] Add ECMP support for vnet tunnel routes (#1960)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
HLD updated here: https://github.com/Azure/SONiC/pull/887
#### Why I did it
Command `monit summary -B` can no longer display the status for each critical process, system-health should not depend on it and need find a way to monitor the status of critical processes. The PR is to address that. monit is still used by system-health to do file system check as well as customize check.
#### How I did it
1. Get container names from FEATURE table
2. For each container, collect critical process names from file critical_processes
3. Use “docker exec -it <container_name> bash -c ‘supervisorctl status’” to get processes status inside container, parse the output and check if any critical processes exit
#### How to verify it
1. Add unit test case to cover it
2. Adjust sonic-mgmt cases to cover it
3. Manual test
* [yang_models]: Update extension yang and types yang with new yang extensions and types respectively.
* [YANG] Added CVL specific type and moved sonic-types to j2 template.
* [sonic-acl] add ACL_TABLE_TYPE table
I implemented ACL table type concept. Till this change, there are predefined ACL table types orchagent knows about (L3, L3V6, etc.) and if other orch requires a custom table a new table type needs to be defined in aclorch.
This PR addresses this limitation by introducing AclTableType which can be constructed from a set of matches, actions and bpoint types user needs. There is also a new handler for ACL_TABLE_TYPE table which is used for user to define table types.
Currently, some of built-in ACL table types that requires special handling are distinguished from others by their names (TABLE_TYPE_MIRROR, TABLE_TYPE_MIRRORV6) and a special handling is performed by an AclOrch.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
When we update the a sai package downing from a remote server, we need to update the version file as well currently, but the reproducible build feature is not enabled in master, it can only be detected when merging the code into the release branches, such as 202106, 202012, etc.
The reproducible feature is to reduce the build failure, not need to break the build when the version not specified. If version not specified, the best choice is to accept the version from remote server.
Co-authored-by: Ubuntu <xumia@xumia-vm1.jqzc3g5pdlluxln0vevsg3s20h.xx.internal.cloudapp.net>
a3e34e30 [Auto Techsupport] Event driven Techsupport Changes (#1796)
efa2ff62 [show][platform summary] Add chassis type in the platform summary output(#1922)
a39350c6 [aclshow] enhance ACL counters to work with FC infrastructure (#1858)
ed880131 [sonic-package-manager] fix registry requests failing when no service field in Bearer fields (#1921)
00b60455 [VS test] Increase test timeout (#1924)
Previously the Yang model unit tests pulled directly from the Yang model source code for their models. This worked up to a point where we had jinja templates which needed to be rendered before they could be tested on. Now we need to reference the install location of the rendered templates for the unit tests.
Additionally, PBH yang was never added to the list of models to install onto a switch so I have resolved that (another example why pulling directly from the source was not correct)
My best explanation for why we only saw this failing on mellanox was that these tests could not have possibly been running on the broadcom build (I have not investigated this specifically). There was no way for these tests to pass recently given they were referencing Yang models which did not exist in the source (ACL).
Signed-off-by: pettershao-ragilenetworks pettershao@ragilenetworks.com
What I did it
Add new platform x86_64-ragile_ra-b6510-32c-r0 (Trident 3)
ASIC Vendor: Broadcom
Switch ASIC: Trident 3
Port Config: 32x100G
Add new platform x86_64-ragile_ra-b6920-4s-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 128x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
c8eceec 400zr initial support (#228)
ef55364 SSD Health: Retrieve SSD health and temperature values from generic SSD info (#229)
26c8346 Fix cmis cable length issue (#225)
671927d Fix typo in the simulated y_cable driver (#226)
51a9aca [sfp-refactor] Add initial support for CMIS in sonic_xcvr (#220)
Signed-off-by: Prince George <prgeor@microsoft.com>
#### Why I did it
Changes required for feature "Event Driven TechSupport Invocation & CoreDump Mgmt". [HLD](https://github.com/Azure/SONiC/pull/818 )
Requires: https://github.com/Azure/sonic-utilities/pull/1796.
Merging in any order would be fine.
Summary of the changes:
- Added the YANG Models for the new tables introduces as a part of this feature.
- Enhanced init_cfg.json with the default config required
- Added a compile Time flag which enables/disables the config required for this feature inside the init_cfg.json
- Enhanced the supervisor-proc-exit-listener script to populate `<feature>:<critical_proc> = <comm>:<pid>` info in the STATE_DB when it observes an proc exit notification for the critical processes running inside the docker.
6f1a0ea (HEAD, origin/master, origin/HEAD, master) [FlexCounter] Add support for ACL counters (#953)
67b3136 [vslib] fill aclcapability.is_action_list_mandatory field (#957)
eba6a1b [ci]: use native armhf and arm64 pool (#965)
04793b1 [az] Set diff coverage threshold to 50% (#963)
6092d50 [syncd] Add workaround for warm boot new objects (#960)
88b62ce Added Flex Counters support for tunnel counters (#886)
a718226 [Counters] Query Counters Stats Capabilities (#952)
This commit fixes/avoids the following errors encountered during the
marvell-armhf build for bullseye
- Fix Marvell prestera DMA driver build failure due to kallsyms_lookup_name()
no longer being exported by the updated bullseye kernel. This is a temporary
fix that will be replaced by a future version of the DMA driver.
- Update qemu-user-static version to align with the new glibc version included
in bullseye
- Skip systemd-sonic-generator unit tests to avoid test failures. Root cause is
still TBD
#### Why I did it
Fix the following build errors observed when building marvell-armhf for bullseye
1. Marvell Prestera DMA driver uses kernel API no longer exported
ERROR: modpost: "kallsyms_lookup_name" [/sonic/platform/marvell-armhf/prestera/mrvl-prestera/cpssEnabler/linuxNoKernelModule/drivers//mvDmaDrv.ko] undefined!
2. Old qemu-user-static version does not support semop() leading to following build failure
semop(1): encountered an error: Function not implemented
3. systemd-sonic-generator unit test failure
ssg-test.cc:217: Failure
Expected equality of these values:
find_string_in_file(str_t, target, num_asics)
Which is: false
expected_result
Which is: true
Error validating Before=single_inst.service in test.service
[ FAILED ] SsgMainTest.ssg_main_40_npu (20 ms)
[----------] 4 tests from SsgMainTest (36 ms total)
[----------] Global test environment tear-down
[==========] 10 tests from 3 test suites ran. (54 ms total)
[ PASSED ] 7 tests.
[ FAILED ] 3 tests, listed below:
[ FAILED ] SsgMainTest.ssg_main_single_npu
[ FAILED ] SsgMainTest.ssg_main_10_npu
[ FAILED ] SsgMainTest.ssg_main_40_npu
3 FAILED TESTS
This pull request add a bash plugin for TACACS+ per-command authorization
#### Why I did it
1. To support TACACS per command authorization, we check user command before execute it.
2. Fix libtacsupport.so can't parse tacplus_nss.conf correctly issue:
Support debug=on setting.
Support put server address and secret in same row.
3. Fix the parse_config_file method not reset server list before parse config file issue.
#### How I did it
The bash plugin will be called before every user command, and check user command with remote TACACS+ server for per-command authorization.
#### How to verify it
UT with CUnit cover all code in this plugin.
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Bash TACACS+ plugin.
#### A picture of a cute animal (not mandatory but encouraged)
Fix support for DHCPV6 Relay multi vlan functionality. Make sure the relayed packet is received at correct interface.
How I did it
Bind a socket to each vlan interface's global and link-local address.
Socket binded to global address is used for relaying data from client to server and receiving data from servers.
Socket binded to link-local address is used for relaying data received from server back to the client.
When sshd realizes that this login can't succeed due to internal device state
or configuration, instead of failing right there, it proceeds to prompt for
password, so as the user does not get any clue on where is the failure point.
Yet to ensure that this login does not proceed, sshd replaces user provided password
with a specific pattern of characters matching length of user provided password.
This pattern is "INCORRECT", which is bound to fail.
If user provided length is smaller/equal, the substring of pattern is overwritten.
If user provided length is greater, the pattern is repeated until length is exhausted.
But if the PAM-tacacs plugin would send this password to AAA, the user could get
locked out by AAA, for providing incorrect value.
How I did it
Hence this fix, matches obtained password against the pattern. If match, fail just before
reaching AAA server.
Why I did it
To add ACL FC to the YANG model.
How I did it
Added to the YANG model and added a UT.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
* [ACL] enable ACL FC when genereting config from minigraph but disable by default
Why I did it
To support ACL counters on Flex Counter Infrastructure.
How I did it
Enable ACL FC in init_cfg and minigraph. Disable when genereting configuration from preset.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
In the build in Bullseye, there are no png files available in the
specified installation source directory. For now, don't bother
installing those files.
This may end up being reverted later if there are indeed png files that
need to be installed for documentation.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Debian actually did a binNMU for snmpd, so to match the package version
we're building with the version in the offiical repos, that version
needs to be manually specified in the changelog.
Buster still needs 5.7.3, because there's a ABI change between 5.7.3 and
5.9 for libsnmp, so for Buster, make sure that 5.7.3 is built, and for
Bullseye, make sure that 5.9 is built.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Remove Python 2 package installation from the base image. For container
builds, reference Python 2 packages only if we're not building for
Bullseye.
For libyang, don't build Python 2 bindings at all, since they don't seem
to be used.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Include validation of chassis dict in platform.json unit test
Based on: Azure/SONiC#768
How I did it
Update platform_json_checker to validate fields in chassis dict.
How to verify it
Verified that the unit test reports success for correct values of existing and capabilities fields in platform.json
Why I did it
Added Buffer yang files derived from sonic/mgmt-cvl/testdata/schema from sonic-mgmt-common, used by mgmt-framework.
Updated BUFFER_PG|({ifname},)*|{pg_num} to BUFFER_PG|{ifname}|{pg_num} in sonic-buffer-pg.yang.
This change is required for configuration migration for dynamic port breakout operation.
Added sonic-buffer-queue.yang for BUFFER_QUEUE
Tables: BUFFER_POOL, BUFFER_PROFILE, BUFFER_PG, BUFFER_QUEUE.
How I did it
Defined Yang models for BUFFER tables based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md
How to verify it
sonic_yang_models package build.
Description for the changelog
MMU Buffer yang files (BUFFER_POOL/BUFFER_PROFILE/BUFFER_PG/BUFFER_QUEUE)
Updating sonic-utilities sub module with the following commits
63a5257 [TACACS+] Add config command for AAA authorization and accounting. (#1889)
8a8577b [dump] [copp] Fixed the NameError Exception for copp dump module (#1911)
84be8b4 Dump media_settings from appDB during fast-reboot (#1910)
563c416 Allow interface type value none (#1902)
095bf54 generic_updater: Fix service validator related issues (#1901)
efbe1f4 [chassis][supervisor][show][interfaces]show interfaces command warning on Supervisor card (#1771)
487b3b7 Add CRM CLIs for SRV6 nexthop and my_sid_entry (#1883)
52b7a47 (HEAD, origin/master, origin/HEAD) [schema]: MACsec statistics support (#520)
48d7d8a [ci]: use native arm64 and armhf pool to build (#552)
Signed-off-by: Ze Gan <ganze718@gmail.com>
This PR allow user to set none value to interface type. So there is a way to achieve the goal via CLI:
config interface type XXX none
config interface speed XXX 10000
config interface type XXX CR
Including the below commits to update swss submodule
8448a60 [vs tests]Migrating sonic-swss tests to use hwsku instead of fakeplatform (#1978)
faa26db Fix random failure in PR/CI build. (#2006)
e03edb6 Allow interface type value none (#1991)
71b9650 [orchagent] Fix group name of port-buffer-drop in flexcounterorch.cpp (#1967)
facdef5 [VS test] Skip flaky virtual chassis test (#2004)
8261c1f [pytest]: Increase timeout when checking services (#2000)
67278be [teammgrd]: Handle LAGs cleanup gracefully on Warm/Fast reboot. (#1934)
e92c1df Enable FEC statistics collection for Ethernet ports (#1994)
9f30ca1 VxLAN Tunnel Counters and Rates implementation (#1859)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
[TACACS+] Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting. (#9029)
#### Why I did it
Support TACACS per-command authorization&accounting.
#### How I did it
Change ConfigDB schema and HostCfg enforcer.
Add UT to cover changed code.
#### How to verify it
Build following project and pass all UTs:
make target/python-wheels/sonic_host_services-1.0-py3-none-any.whl
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting.
#### A picture of a cute animal (not mandatory but encouraged)
Added get_system_mac support for cisco-8000 device
Why I did it
This is required to assign unique MACs to namespaces on Backend and Frontend asics
for cisco-8000 platforms
How I did it
Add vendor specific hook in get_system_mac. The MAC address are read from /profile.ini
file
How to verify it
config load_minigraph on a multi-asic system
config save
check mac addresses in DEVICE_METADATA section in each config_db json file
The submodule update includes the following commits
ac3103a Add missing neighbor resolution for MPLS route programming (#1968)
bfba0ad [vlanmgr]Fix for STATE_DB port check logic (#1980)
9ef2ba4 Update VLAN removal code to work with 5.10 kernel and new
41fb26c Handle setting unknown mux state (#1984)
ac09bde Increase timeout for VS tests (#1988)
da8a43e Check if appl DB exists before deleting (#1983)
553d75a Change tunnel orch order (#1977)
7444e96 Add rekey period in macsec mgr (#1958)
d95823d [Buffermgr]Graceful handling of buffer model change (#1956)
b0aa6a0 EVPN VxLAN enhancement to support P2MP tunnel based programming for L
85bdf54 Fix the option missing in kernel config issue (#1973)
6b15584 Orchagent validates mirror session queue parameter against maximum va
fc9ffb9 [copp] Add ISIS, LDP and micro-BFD trap types to CoPP manager (#1890)
452cbc1 [macsecorch]: Add IPG adjusting for MACsec gearbox model (#1925)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
What I did:
Fix the typo in Internal Peer Group template for Packet-based Chassis.
Address Review comments of PR: [chassis-packet] minigraph parsing and BGP template changes #8966
- Static Route Parsing for Host
- Formatting of chassis port_config.ini
#### Why I did it
Includes below commits
```
c2d4945 2021-09-17 | [snmp] Allow system with no ports in config db run without errors (#221) [Lior Avramov]
fccb21b 2021-08-30 | [RFC1213]: Initialize lag oid map in reinit_data instead of (#232) [SuvarnaMeenakshi]
```
#### Why I did it
Fixes https://github.com/Azure/sonic-buildimage/issues/8619
#### How I did it
1) Listening to CFG_DB notifications was migrated from ConfigDBConnector to SubscriberStateTable & Select
2) This change in design helped me to remove `update_all_features_config` which was roughly taking a 5-10 sec time to execute and thus the reason for blackout
3) Edited FeatureHandler, Feature & NtpCfgd classes to suit this design
4) Added corresponding mocks and UT's
**Changes made to classes other than HostConfigDaemon:**
With the previous design, the initially read data from the config db was applied by using hardcoded methods even before the config_db.listen() was called. For Eg: `update_all_features_config` for FeatureHandler and load() named methods for NtpCfgd etc
But with this design, since the existing data is read and given out as a notification by SubscriberStateTable, i've pretty much removed these hardcoded methods. Thus changes made to these class will be around adapting them to the new design and no change in the actual functionality .
#### How to verify it
UT's:
```
tests/determine-reboot-cause_test.py ......... [ 29%]
tests/procdockerstatsd_test.py . [ 32%]
tests/caclmgrd/caclmgrd_dhcp_test.py ...... [ 51%]
tests/hostcfgd/hostcfgd_radius_test.py .. [ 58%]
tests/hostcfgd/hostcfgd_test.py ............. [100%]
```
Verified manually,
```
Sep 10 22:53:25.662621 sonic INFO systemd[1]: hostcfgd.service: Succeeded.
Sep 10 22:55:04.127719 sonic INFO /hostcfgd: ConfigDB connect success
Sep 10 22:55:04.128108 sonic INFO /hostcfgd: KdumpCfg init ...
Sep 10 22:55:04.148819 sonic INFO /hostcfgd: Waiting for systemctl to finish initialization
Sep 10 22:55:04.163452 sonic INFO /hostcfgd: systemctl has finished initialization -- proceeding ...
Sep 10 22:55:04.163834 sonic INFO /hostcfgd: Kdump handler...
Sep 10 22:55:04.164019 sonic INFO /hostcfgd: Kdump global configuration update
Sep 10 22:55:04.758784 sonic INFO hostcfgd[184471]: kdump is already disabled
Sep 10 22:55:04.758876 sonic INFO hostcfgd[184471]: Kdump is already disabled
Sep 10 22:55:05.182021 sonic INFO hostcfgd[184511]: Kdump configuration has been updated in the startup configuration
Sep 10 22:55:05.596919 sonic INFO hostcfgd[184528]: Kdump configuration has been updated in the startup configuration
Sep 10 22:55:06.140627 sonic INFO /hostcfgd: Feature nat is stopped and disabled
Sep 10 22:55:06.642629 sonic INFO /hostcfgd: Feature telemetry is enabled and started
Sep 10 22:55:07.101297 sonic INFO /hostcfgd: Feature pmon is enabled and started
Sep 10 22:55:07.554366 sonic INFO /hostcfgd: Feature database is enabled and started
Sep 10 22:55:08.009329 sonic INFO /hostcfgd: Feature mgmt-framework is enabled and started
Sep 10 22:55:08.394952 sonic INFO /hostcfgd: Feature macsec is stopped and disabled
Sep 10 22:55:08.782853 sonic INFO /hostcfgd: Feature snmp is enabled and started
Sep 10 22:55:09.205381 sonic INFO /hostcfgd: Feature teamd is enabled and started
Sep 10 22:55:09.224877 sonic INFO /hostcfgd: Feature what-just-happened is enabled and started
Sep 10 22:55:09.627929 sonic INFO /hostcfgd: Feature lldp is enabled and started
Sep 10 22:55:10.086993 sonic INFO /hostcfgd: Feature swss is enabled and started
Sep 10 22:55:10.170312 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:11.012236 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:12.225946 sonic INFO /hostcfgd: Feature bgp is enabled and started
Sep 10 22:55:12.712792 sonic INFO /hostcfgd: Feature dhcp_relay is enabled and started
Sep 10 22:55:13.166656 sonic INFO /hostcfgd: Feature sflow is stopped and disabled
Sep 10 22:55:13.593639 sonic INFO /hostcfgd: Feature radv is enabled and started
Sep 10 22:55:14.034106 sonic INFO /hostcfgd: Feature syncd is enabled and started
Sep 10 22:55:14.113064 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:14.863601 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.1, op: SET, data: {'auth_type': 'pap', 'passkey': 'p*****', 'retransmit': '1', 'timeout': '1'}
Sep 10 22:55:14.938605 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:15.667545 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.3, op: SET, data: {'auth_type': 'chap', 'passkey': 'p*****', 'retransmit': '2', 'timeout': '2'}
Sep 10 22:55:15.667801 sonic INFO /hostcfgd: RADIUS (NAS) IP change - key:eth0, current global info {}
Sep 10 22:55:15.746531 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 23:04:47.435340 sonic INFO /hostcfgd: ntp server update key 0.debian.pool.ntp.org
Sep 10 23:04:47.435661 sonic INFO /hostcfgd: ntp server update, restarting ntp-config, ntp servers configured {'0.debian.pool.ntp.org'}
Sep 10 23:04:47.866394 sonic INFO /hostcfgd: NTP GLOBAL Update
Sep 10 23:04:47.866557 sonic INFO /hostcfgd: ntp global update for source intf old {''} new {'eth0', 'Loopback0'}, restarting ntp-config
Sep 10 23:16:25.157600 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl unmask sflow.service'
Sep 10 23:16:25.178472 sonic INFO hostcfgd[192106]: Removed /etc/systemd/system/sflow.service.
Sep 10 23:16:25.582018 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl enable sflow.service'
Sep 10 23:16:25.604534 sonic INFO hostcfgd[192123]: Created symlink /etc/systemd/system/sonic.target.wants/sflow.service → /lib/systemd/system/sflow.service.
Sep 10 23:16:26.029416 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl start sflow.service'
Sep 10 23:16:26.691927 sonic INFO /hostcfgd: Feature sflow is enabled and started
```
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Storage T0's have all vlan members as tagged
How I did it
Since currently minigraph does not have a unique way to identify if a vlan member is tagged/untagged and to ensure other scenarios are not broken, the logic used is to just update the vlan member type as 'tagged' when we determine that it is a storage backend device. This change will apply only to storage backend T0's since storage backend T1's will not have vlan member information
How to verify it
Updated the storage backend T0 testcases to check for tagged vlan members
Added testcase to check if a T1 and backend T1 device generates an empty vlan member table
Existing vlan member testcases are good enough for checking if any regression has been caused for regular T0's
Build sonic_config_engine-1.0-py3-none-any.whl successfully
#### Why I did it
Fix a recent build error introduced by a pre-release redis-py. This is a general issue because `python setup.py install` (ie `easy_instal`) does not ignore pre-release versions. The fix is suggested by https://github.com/pypa/setuptools/issues/855#issuecomment-583803959
8ea834b [sonic_installer] Change sonic_installer check ASIC mismatch by platforms list (#1836)
9017d99 Fix the option missing in kernel config issue (#1888)
6595ad4 [mlag] fix log print sequence (#1730)
e600e1c CLI command to load config in Yang format (#1781)
00948d0 Fix the target db version of portchannel-key test (#1842)
6412fea [sonic-package-manager] remove make_python_identifier (#1801)
f738818 [sonic-package-manager] stop service explicitelly before uninstalling package (#1805)
d8ee5e9 Remove exec from platform_reboot_plugin call to handle any hang issue. (#1879)
827fcee [chassis][routecheck]filter out the chassis internal interfaces (#1798)
4d732c6 [generic_config_updater] Logging (#1864)
25bb184 [config]: Add loopback interfaces to interface name checker (#1869)
c950a55 Validate input of config mirror_session add (#1825)
9ab20fd [show][config] fix the muxcable commands for interface naming mode (#1862)
476b3a4 [multi-asic][cli][chassis-db] Avoid connecting to chassis db for cli commands executed from linecard (#1707)
8bb9c5a (HEAD -> master, origin/master, origin/HEAD) Add retry reading/setting mux status to simulated y-cable driver (#221)
2ebd786 [sfp-refactor] Add initial support for SFF-8636 in sonic_xcvr (#218)
221fb8a Fix QSFP-DD power class mask (#212)
4598d40 [Y-Cable][Broadcom] upgrade to support Broadcom Y-Cable API to release 1.2 (#217)
0fdd198 [sfp-refactor] Add initial support for SFF-8436 in sonic_xcvr (#215)
a09f5a3 [sfp-refactor] Add new sonic_xcvr package for common transceiver logic (#201)
7ca4f51 Update SFP index definition (#214)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This pull request will fix bash build break issue when re-build bash.
#### Why I did it
src/bash project using quilt to manage patches, and quilt can't apply patch correctly when cache folder '.pc' is not clean.
#### How I did it
Add command in make file to remove quilt cache folder before apply patches.
#### How to verify it
Re-build bash target target/debs/buster/bash_5.1-2_amd64.deb to validate this fix work.
Pass all UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Fix bash build break issue when re-build bash.
#### A picture of a cute animal (not mandatory but encouraged)
It is required by stretch/sonic-device-data_1.0-1_all.deb, which is required by docker-sonic-mgmt.gz.
Stretch distribution has old Python 3.5.3.
scandir.close() is new in Python version 3.6.
ref: https://docs.python.org/3/library/os.html#os.scandir.close
Fix the check used to wait for interfaces to come up. The group name in
the supervisor config files has changed from isc-dhcp-relay to
dhcp-relay.
Also, in the wait script, wait 10 additional seconds after the vlans,
port channels, and any interfaces are up. This is because dhcrelay
listens on all interfaces (in addition to port channels and vlans), and
to ensure that it stays in a clean state during runtime, wait some extra
time to make sure that those interfaces are created as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This makes it possible to install the debug symbols if needed. Also install
the package into the debug version of sonic-dhcp-relay container.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
With current code the delay will take place even if simple 'config reload' command executed and this is not desired.
This delay should be used only when fast-rebooting.
How I did it
Change the type of delay to OnBootSec instead of OnActiveSec.
How to verify it
Fast-reboot with this PR and observe the delay.
Run 'config-reload' command and observe no delay is running.
Redis 4.0.0b1 has been uploaded to pip as a prerelease version. This
version drops support for Python 2 and only supports Python 3. Because
setup.py is being run, it will use the latest version of a package and
not the latest stable version (which is still 3.5.3).
Therefore, pin the redis package to version 3.5.3, so that it will work
for both Python 2 and 3.
#### How to verify it
Make sure that redis-dump-load for Python 2 builds today.
1. Changes for Generation LC-Graph for packet-based chassis.
2. Added Support Ipv6 Peering on Loopback4096 for voq also
3. Updated asic topology yml files to be offset of slot
4. Made slot_num to take string slot<number> instead of number
5. Consolidated template_dpg_voq_asic.j2 into dpg_asic.j2
6. Remove Loopback4096 from asic topology and parse as dut invertory for
multi-asic
7. Updated topo_facts parsing for asic topology_
8. Internal BGP Session rename from <VoqChassisInternal> to <ChassisInternal> and take switch_type as value.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
This PR deletes local-to-buildimage linkmgrd and creates new submodule
pointing to github repo of sonic-linkmgrd.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
This pull request extract tacacs support functions into library to share TACACS config file parse code with other project. Also fix memory leak issue in parse config code.
Why I did it
To support TACACS per command authorization, we need reuse the TACACS config file parse code in bash plugin project.
How I did it
Add libtacsupport.pc.in to extract tacacs support functions into library.
Fix memory leak issue in TACACS config parse code by convert the dynamic memory allocation memory to static memory allocation.
How to verify it
Pass all current UT.
Check shared library generated manually.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Extract tacacs support functions into library, this will share TACACS config file parse code with other project.
Also fix memory leak issue in parse config code.
Since database.service has been moved to execute after rc-local.service,
and determine-reboot-cause.service rely on database.service, we have to
specify that in "After=".
Signed-off-by: Xichen Lin <xichenlin@microsoft.com>
Co-authored-by: Xichen Lin <xichenlin@microsoft.com>
* To add portchannel support in frrcfgd and bgpcfgd
* Update is_zero_ip() to handle portchannel name
Signed-off-by: d-dashkov <Dmytro_Dashkov@Jabil.com>
This pull request add plugin support library to bash.
And we will create a TACACS+ plugin for bash in an other PR, which will bring per command authorization feature to bash.
Why I did it
To support TACACS per command authorization, we check user command before execute it.
How I did it
Add plugin support to bash.
How to verify it
UT with CUnit under bash project cover all new code in plugin.c.
Also pass all current UT.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Add plugin support to bash.
Include the following commits:
f9bbed3cb86a3bab9a07745096835dbdbe5a4db6
Convert Unit Tests from unittest framework to pytest framework
e842c5ff317c67919dcbcab3358143cb9a16c9dd
Generate code coverage for Unit Tests
#### Why I did it
Add platform_asic file to each platform folder in sonic-device-data package. The file content will be used as the ground truth of mapping from PLATFORM_STRING to switch ASIC family.
One use case of the mapping is to prevent installing a wrong image, which targets for other ASIC platforms. For example, currently we have several ONIE images naming as sonic-*.bin, it's easy to mistakenly install the wrong image. With this mapping built into image, we could fetch the ONIE platform string, and figure out which ASIC it is using, and check we are installing the correct image.
After this PR merged, each platform vendor has to add one mandatory text file `device/PLATFORM_VENDOR/PLATFORM_STRING/platform_asic`, with the content of the platform's switch ASIC family.
I will update https://github.com/Azure/SONiC/wiki/Porting-Guide after this PR is merged.
You can get a list of the ASIC platforms by `ls -b platform | cat`. Currently the options are
```
barefoot
broadcom
cavium
centec
centec-arm64
generic
innovium
marvell
marvell-arm64
marvell-armhf
mellanox
nephos
p4
vs
```
Also support
```
broadcom-dnx
```
#### How I did it
#### How to verify it
Test one image on DUT. And check the folders under `/usr/share/sonic/device`
[Submodule advance sonic-swss]
Include below commits to master image:
Cache routes for single nexthop for faster retrieval Azure/sonic-swss#1922
Reduce route count for route perf test (Azure/sonic-swss#1928)
[pytest]: Re-use DVS container when possible (Azure/sonic-swss#1816)
[PORTSYNCD] when no ports on config db on init, continue and set Port… (Azure/sonic-swss#1861)
[gearbox] Add gearbox unit test (Azure/sonic-swss#1920)
Reverted skipped test_buffer_dynamic test cases (Azure/sonic-swss#1937)
Revert "[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STA… (Azure/sonic-swss#1945)
Why I did it
Add yang model for Feature configuration
How I did it
Add feature.yang and unit tests
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Changes:
-- pre Process Grouping section from all yang models, so it can be used
from any yang model.
-- add jsondiff in setup.py, it is useful for test debugging in case of
failures.
-- use 'stypes' instead of head.
-- pass config DB table name in _createLeafDict().
-- added test config for grouping.
-- white spaces changes.
Note: Changes are done in the way that we can add support for other
Generic YANG statement easily for translation.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
How I did it
Added if multi npu check before invoking the load global config.
How to verify it
Restart caclmgrd after this change and check if no error log is thrown.
Depends on Azure/sonic-utilities#1626
Depends on Azure/sonic-swss#1754
QOS tables in config db used ABNF format i.e "[TABLE_NAME|name] to refer fieldvalue to other qos tables.
Example:
Config DB:
"Ethernet92|3": {
"scheduler": "[SCHEDULER|scheduler.1]",
"wred_profile": "[WRED_PROFILE|AZURE_LOSSLESS]"
},
"Ethernet0|0": {
"profile": "[BUFFER_PROFILE|ingress_lossy_profile]"
},
"Ethernet0": {
"dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
"pfc_enable": "3,4",
"pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]",
"tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
"tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]"
},
This format is not consistent with other DB schema followed in sonic.
And also this reference in DB is not required, This is taken care by YANG "leafref".
Removed this format from all platform files to consistent with other sonic db schema.
Example:
"Ethernet92|3": {
"scheduler": "scheduler.1",
"wred_profile": "AZURE_LOSSLESS"
},
Dependent pull requests:
#7752 - To modify platfrom files
#7281 - Yang model
Azure/sonic-utilities#1626 - DB migration
Azure/sonic-swss#1754 - swss change to remove ABNF format
Why I did it
When feature state is set to always_enabled hostcfgd throws error message
Sep 21 22:30:55.135377 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature bgp
Sep 21 22:30:55.420268 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature database
Sep 21 22:30:58.672714 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature swss
This is due to feature == always_enabled not handled properly.
How I did it
Handled the scenario when feature is always enabled
How to verify it
Restart hostcfgd with feature state configured as always_enabled and check if there are no errors.
Added UT to cover the scenario.
Why I did it
SONiC YANG model support for warm restart.
How I did it
Defined warm restart YANG containers and lists based on config-DB schema.
How to verify it
Successful build of the following packages:
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arthi Sivanantham <arthi_sivanantham@dell.com>
*[Submodule] update for swss with following commits:
a3fdaf4 QOS fieldvalue reference ABNF format to string changes ([sonic-platform-daemons] Update submodule #1754)
a8fcadf Add sleep to ensure starting route perf test after the vs is stable ([mellanox]: Update hw-mgmt service with the stop action #1929)
a89d1f8 Fix failing DPB LAG tests ([socat]: build socat with readline #1919)
86b4ede [portsorch] Avoid orchagent crash when set invalid interface types to port (Upgrade azure-keyvault to known compatible version #1906)
025032f [VS] Skip failing test - test_recirc_port ([rsyslog]: use # to separate container and program name in syslog msg #1918)
d338bd0 [pfcwd] Fix the polling interval time granularity (Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks #1912)
14c937e Enabling copp tests ([Mellanox] Update hw-management service config #1914)
fbdcaae [teammgrd]: Improve LAGs cleanup on shutdown: send SIGTERM directly to PID. ([docker-syncd-mlnx] add new mlnx-sfpd daemon to docker-syncd-mlnx #1841)
002bb1d [tlm teamd] Add retry mechanism before logging the ERR in get_dumps. ([py-swss/config] config load-minigraph failure leaves database in wrong state #1629)
57d21e7 [pfcwd] Convert polling interval from ms to us in LUA scripts ([interfaces]: Move IP/MTU information from interfaces file into database #1908)
d01524d [fgnhgorch] Enable packet flow when no FG ECMP neighbors are resolved (Update arista driver submodule to includes interrupt handling changes #1900)
8cf355d Mux state order change ([submodule] update snmpagent and dbsyncd, extending/implementing ieee802.1ab, rfc3433, rfc2737 MIBs #1902)
Why I did it
Added support for the device N3248PXE
How I did it
Implemented the support for the platform N3248PXE
n3248pxe_unit_test_log.txt
Switch Vendor: DellEMC
* Switch SKU: N3248PXE
* ASIC Vendor: Broadcom
* SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
Why I did it
Added support for the device N3248TE
How I did it
Implemented the support for the platform N3248TE
Switch Vendor: DellEMC
Switch SKU: N3248TE
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
The following fixes are included:
b502743 [gearbox] Since ASIC_DB, as well its COUNTER_DB, FLEX_COUNTER_DB use separator ':', GB_ASIC_DB
should use same ((Azure/sonic-swss-common#532)
81182ec Added support for setting TTL on a Table managed entry. ((Azure/sonic-swss-common#526)
Added sonic-pfcwd.yang file that defines the yang model for PFC watch dog parameters
sonic-pfcwd.yang is required for configuring action, detection_time, restoration time of PFC watchdog on the interface port.
2cd6236 [voq][chassis] Fix for issue in chassis redis server connection check (#110)
9da577d [port_util] Fix issue in function get_interface_oid_map (#114)
740a44c [port_util] Allow system without ports in config db run without errors (#109)
d07682e Merge pull request #111 from xumia/azp-coverage
482cac2 [Ethernet-IB][index] Modifed the port_util to support the VoQ Inband Port (#113)
69eac92 Support azp diff coverage
Signed-off-by: liora <liora@nvidia.com>
* [multi-asic][cli][chassis-db] Avoiding connecting to chassis db
Currently, for all the cli commands, we connect to all databases
mentioned in the database_config.json. The database_config.json also
includes the databases from chassis redis server from supervisor card.
It is unneccessary to connect to databases from chassis redis server
when cli commands are executed form linecard. But we need to allow
connection to chassis databases when the cli commands are executed from
supervisor card.
The changes in this PR fixes this problem. This PR requires that
asic.conf in supervisor card includes VOQ_SUPERVISOR with value 1 to
indentify the supervisor card. The connect_to_all_dbs_for_ns() is
changed to skip chassis databases form the list of collected databases
if the card is not supervisor card.
To Fix#8697 . The config load_minigraph initializes 'admin_status' to up when platform.json has DPB configs. This doesn't happen when using port_config.ini
The update minigraph has logic to initialize only the ports whose neighbors are defined or those belonging to portchannel
However, a change was introduced to have default admin status to be 'up' in portconfig.py when the minigraph was using platform.json
This will lead to sanity check failure in sonic-mgmt and thus no test cases could be run
Fix#8722
retreat two commits which cause warm reboot regression
* eb79ca4 2021-09-01 | [pbh]: Add PBH OA (#1782) [Nazarii Hnydyn]
* 3d6b1f0 2021-08-31 | [buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_ROOM_WATERMARK_BYTES on a pool where it is not supported (#1857) [Stephen Sun]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
What I did it
Add new platform x86_64-ragile_ra-b6910-64c-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 64x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
To include sonic_installer swap setup changes
171eb4f [sonic_installer] Add swap setup support (#1787)
6483b0b QOS fieldvalue refernce ABNF format to string (#1626)
8d16eb5 [Fast-reboot] Set flex counters delay indicator to prevent flex counters enablement after fast-reboot (#1768)
1bc24ca [portstat pfcstat] Unify the packet number format in the output of portstat and pfcstat in all cases (#1755)
d7900dd [config][generic-update] Implementing patch sorting (2nd attempt) (#1794)
7ed9a91 [show] Allow system with no ports in config db run without errors (#1754)
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Includes commits
```
d7900dd 2021-09-01 | [config][generic-update] Implementing patch sorting (2nd attempt) (#1794) [Mohamed Ghoneim]
7ed9a91 2021-09-01 | [show] Allow system with no ports in config db run without errors (#1754) [Lior Avramov]
```
Commits on Aug 17, 2021
[VS Test] Skip flaky tests (#1875) f501e1c
Skipping another flaky test temporarily (#1878) 15a014b
Commits on Aug 18, 2021
Change rif_rates.lua and port_rates.lua scripts to calculate rates co… ed867b1
Commits on Aug 20, 2021
[ACL] Match TCP protocol while matching TCP_FLAG (#1854) 756471a
Commits on Aug 23, 2021
[macsecmgrd] MACsec XPN changes (#1821) 4bf3d61
Commits on Aug 24, 2021
[ci]: fix artifacts download from swss-common and sairedis (#1882) 12f0ee7
Commits on Aug 26, 2021
[gearbox] Set port speed to SAI_PORT_ATTR_SPEED for gearbox (#1785) fc6cd81
[fpmsyncd][MPLS] updates for MPLS plus AZP libnl3 install (#1871) 76e3406
Commits on Aug 27, 2021
Fix vs test failure in test_buffer_traditional (#1881) db9ca83
Commits on Aug 31, 2021
[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_R… 3d6b1f0
Commits on Sep 01, 2021
[pbh]: Add PBH OA (#1782) eb79ca4
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
Reset flex counters delay flag on config DB when enable_counters script is called to allow enablement of flex counters in orchagent.
#### How I did it
Push to config DB 'false' value for delay indication when enable_counters script is called before enabling the counters.
#### How to verify it
Observe counters are created when enable_counters script is called.
Commits on Aug 25, 2021
[show][config] cli refactor for muxcable with abstract class implemen… 37039f5
[voq][chassis] VOQ cli show commands implementation (#1689) 7ebb2f7
[PBH] CLI for Policy Based Hashing (#1701) 6fd0675
Commits on Aug 26, 2021
[config reload] Call systemctl reset-failed for snmp,telemetry,mgmt-f… f5ce87a
Commits on Aug 27, 2021
Fix logic in RIF counters print (#1732) 83309c6
Commits on Aug 30, 2021
[ecnconfig] Fix exception seen during display and add unit tests (#1784) 3e8626e
Commits on Aug 31, 2021
[debug dump util] Module implementation Logic and Port Module (#1667) 720b650
#### Why I did it
Fixing issue [[sonic-utilities] Unit test failed when building sonic-utilities #1761](https://github.com/Azure/sonic-utilities/issues/1761)
Importing `sonic-acl` caused getting references by `backlinks()` to break,
#### How I did it
solution is to comment out the importing statement as it is not used anyway.
#### How to verify it
Ran sonic-utilities unit-tests locally after the fix, and all passed.
#### Why I did it
To bump thrift version to 0.13.0, to fix some dependencies issues.
#### How I did it
As there are dependencies between thrift and saithrinft server (bf3630316c/test/saithrift) which is used by syncd-rpc to update thrift version, I also need to make changes in saithrinft server, and then SAI ref point should be updated in sairedis, and then sairedis ref point should be updated too. It is too many change, so I decided to add thrift 0.13.0 as separeate target to be able to work and test father changes in saithrinft and one when appropriate changes will be merged to SAI and ref points will be updated I will squash this and the old thrift target. I was not able to build thrift deb pkg by original rules, so I copied `debian `folder from the old version and tune it for newer one.
#### How to verify it
```
make init
make configure PLATFORM=vs
make target/debs/buster/libthrift_0.13.0_amd64.deb
```
```
This PR updates the following commits in sonic-platform-daemons
e038bc2 [xcvrd] initial support for integrating vendor specfic class objects for calling Y-Cable API's inside xcvrd (#197)
57e3d78 Fix issue#8230 (#210)
f63fc94 [thermalctld] Use interval set in thermal policy if available (#164)
8b2227d [CI] Sum up Azp unit test code coverage (#209)
b880c48 [xrcvd]: Added unit test for sfp oir events (#205)
4a32b5a [y-cable] fix for logging the xcvrd metrics before writing the state to the State-DB (#208)
53e1532 (origin/shilong-test) Add str conversion for numeric xcvr info fields to xcvrd (#200)
03a4add Introduce mgmtinit delay after transceiver module insertion (#201)
This PR updates the following commits in sonic-platform-common
0dc71c1 Add y-cable driver for simulated mux (#213)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* e12c1c8 (origin/master, origin/HEAD) disk_check: Script updated (#1747)
* 27502f0 [dhcp_relay] Update CLI reference document and add a new API for ip address type (#1717)
* cd3ee78 [Config] Update config command of kdump (#1700)
* 4cb3b72 [Show] Update the subcommands of Kdump. (#1682)
* c03342f [sfputil] Gracefully handle improper 'specification_compliance' field (#1741)
* 103de86 [CLI][MPLS][Show] Fixed show and config mpls cli bug where invalid interfaces would pasâ#1770)
* 04cc047 [route_check] Filter out VNET routes (#1612)
* 9395ebd [show][platform] Revise chassis info fallback to only fall back on pmon crash (#1751)
508202b 2021-08-24 Add a new field for FLEX_COUNTER_TABLE to indicate delay for flex counters (#523)
9fd7dbf 2021-08-20 [logger] Make map access thread safe and proper terminate thread (#510)
e4c3d0b 2021-08-20 Test with coverage output, publish gcov on Azure pipelines (#517)
ef21bec 2021-08-18 Update schema.h to include config_db DHCP and state_db counter table (#521)
4e4eb9d 2021-08-19 [schema] Add next hop group table to schema (#475)
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
c17c370 [Y-Cable][Broadcom] Broadcom implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#208)
#### Why I did it
Allow cfggen to work on system without ports in platform.json or in port_config.ini
#### How I did it
Add json write of PORT section only if the dictionary that contains the ports is not empty.
#### How to verify it
sonic-cfggen -k ACS-MSN3700 -H -j /etc/sonic/init_cfg.json --print-data
Add a patch in ifupdown2 such that if DHCP is used for an interface, and
the policy setting sets dhcp-wait to no (meaning don't wait for dhclient
to acquire an IP address), then don't check to see if the interface has
a new IP address, since dhclient will still be working.
Fixes#8512.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Update sonic-utilities submodule to include below commits:
29f4a16 Global and Interface commands for IPv6 Link local address enhancements (#1159)
a99d56d Improve config error handling on version_info (#1760)
5002745 Load the database global_db. (#1752)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
For gearbox support on arista_7280cr3mk, the following commit in sonic-sairedis is needed:
2021-07-21 c20321c Kamil Cudnik: [meta] Allow objects with the same key exist on different switches (#865)
Fix for sonic-cfggen exception during platform string read during fresh install and start of sonic in multi asic, /var/run/redisX/ is created after database docker is started.
with state of tdport from previous warm-reboot.
In case LAG was down before reboot, lacp->wr is not cleared.
In lacp_event_watch_port_flush_data we incremented nr_of_tdports and add
tdport to lacp->wr.state. In case lacp->wr.state already had this tdport
we do not set new state for tdport but appened a new item in
lacp->wr.state. In case we preformed warm-reboot and PortChannel member
was down, after reboot PortChannel member became up next warm-reboot
will initialize teamd with PortChannel member in down state.
Fix this issue by calling stop_wr_mode() when LAG was down. This was probably intended but missed.
#### Why I did it
To fix an issue seen in warm-reboot-sad test cases.
#### How I did it
I fixed it in SONiC libteam patch that adds warm-reboot support. Details in commit description.
#### How to verify it
Run warm-reboot-sad test on t0-56 topology.
If branch exist already, today FRR build fails. Branch may exist on rebuild.
With this PR, we will Checkout branch gracefully if branch exists already.
Signed-off-by: Praveen Chaudhary<pchaudhary@linkedin.com>
In version 3.0.0, If a broadcast address is specified in
/etc/network/interfaces, then when ifup is run, it will fail with an
error saying `'str' object has no attribute 'packed'`. This appears to
be because it expects all attributes for an interface to be "packable"
into a compact binary representation. However, it doesn't actually
convert the broadcast address into an IPNetwork object (other addresses
are handled).
Therefore, convert the broadcast address it reads in from a str to an
IPNetwork object.
Also explicitly specify the scope of the loopback address in
/etc/network/interfaces as host scope. Otherwise, it will get added as
global scope by default. As part of this, use JSON to parse ip's output
instead of text, for robustness.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
strncpy calls need to be mindful about the destination buffer size
passed in and doing an explicit null termination.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This PR for submodule update adds the following commits
ce51894 [Y-Cable] add the definition inside setup.py to include sonic_y_cable.credo as a package (#211)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
[DPB] BGP_NEIGHBOR yang model causing DPB errors.
How I did it
Allowed the BGP_NEIGHBOR list with just IP as the key to allow the current BGP neighbor table in the community.
How to verify it
Built the SONIC YANG models.
d8ca31c (origin/master, origin/HEAD, master) [vnet/vxlan] Add support of multiple mappers for the VxLAN tunnel (#1843)
7280e19 [orchagent][ports] Add port reference increment / decrement to lag member add / remove flows (#1825)
0217b66 [nhg]: Add support for weight in nexthop group member. (#1853)
df96059 VOQ: Nexthop for remote VOQ LC should be created on inband OIF. (#1823)
8f7ea14 Code changes to support IPv6 Link local enhancements (#1463)
8674b3c Open record file in append mode (#1845)
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
enable automated test suites to selectively run relevant tests ( or not run tests ) based upon a new port_type identifier in hwsku.json
How I did it
Modified the valid optional fields in validity check for hwsku.json per recommendation from Joe in
https://github.com/Azure/sonic-mgmt/pull/2654/files
Co-authored-by: Carl Keene <keene@nokia.com>
Signed-off-by: Rajkumar Pennadam Ramamoorthy rpennadamram@marvell.com
Why I did it
Install sonic image from ONIE. Once system is up, execute "config reload" command.
Root cause is that "determine-reboot-cause.service" was in failed state.
root@sonic:/host/reboot-cause# systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● determine-reboot-cause.service loaded failed failed Reboot cause determination service
How I did it
Fixed the issue by setting default reason to "REBOOT_CAUSE_UNKNOWN" instead of "None".
How to verify it
Check " determine-reboot-cause.service' loaded successfully post image installation from ONIE.
Verify "reboot-cause.txt" file is created and config reload succeeds.
#### Why I did it
hostcfgd is starting at the same time as 'create_switch' method is called on orchagent process.
This introduce a degradation on the function execution time which eventually cause the fast-boot flow and a boot scenarion in general to run slower (~6 seconds).
This change will delay the start time of this daemon.
The aaastatsd will delay as well since it has a dependency on hostcfgd, so it is required to delay both.
90 seconds determined as the maximum allowed downtime for control plane to come back up on fast-boot flow.
#### How I did it
Add two timers for hostcfgd and aaastatsd services in order to delay the startup of these services.
#### How to verify it
Install an image with this change and observe the daemons start 90 seconds after the system boot.
This PR updates the following commits
cd3cca7 [Y-Cable][Credo] Credo implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#203)
bd694b2 Load interval from thermal_policy.json (#178)
c43dc17 [sonic_y_cable] add abstract class YCableBase required for Y-cable API support for multiple vendors (#186)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Update default cable len to 0m for TD2 (#8298)
* Update sonic-cfggen tests with the correct cable len
Signed-off-by: Neetha John <nejo@microsoft.com>
As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.
Why I did it
To align with the changes in Azure/sonic-swss#1830
How to verify it
- With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
- Cfggen tests passed with the cable len update
#### Why I did it
Remove the call to `SonicDBConfig.load_sonic_global_db_config()` in the multi asic functions.
The expection is the client calling this function will call `SonicDBConfig.load_sonic_global_db_config()`
This PR is dependent on the PR https://github.com/Azure/sonic-utilities/pull/1712
#### How to verify it
compile sonic-utilities
This PR is to update sonic-utilities for master branch
Changes including
```
54b74a2 [LLDP] Fix lldpshow script to enable display multiple MAC addresses on the same remote physical interface (#1657)
0d53b7a [sonic_installer] don't print errors when installing an image not supporting app ext (#1719)
394e2fb Implement script null_route_helper (#1737)
```
Signed-off-by: bingwang <bingwang@microsoft.com>
Included commits:
* dd01b56 disk_check updates:
* 8a74d03 [CLI][show][bgp] Fix the show ip bgp network command
* 679a4ba [MACsec]: Allow upgrade-docker for macsec container
* e9c73e8 [CLI][MPLS][Show] Added multi ASIC support for 'show mpls command'.
I have been seeing intermittent (~40%) build failures with the same error described in PR https://github.com/Azure/sonic-buildimage/pull/6592, even with that fix present
```
/usr/bin/ld: mibgroup/ip-forward-mib/ipCidrRouteTable/.libs/ipCidrRouteTable_interface.o: file not recognized: file truncated
...
libtool: error: 'mibgroup/ip-forward-mib/inetCidrRouteTable/inetCidrRouteTable_interface.lo' is not a valid libtool object
make[5]: *** [Makefile:1020: libnetsnmpmibs.la] Error 1
make[5]: *** Waiting for unfinished jobs....
```
#### How I did it
Use `-j1` for the libsnmp build regardless of the value of `$(MULTIARCH_QEMU_ENVIRON)`
#### How to verify it
Performed 10 builds of the libsnmp target (`target/debs/buster/libsnmp-base_5.7.3+dfsg-5_all.deb`) with and without this change. Without the change, hit the error 40% of the time. With the change did not see the error at all
Signed-off-by: Justin Sherman <jusherma@cisco.com>
0443e66050256a87f8e92db7cd3c36cc139ebe14 (HEAD -> master, origin/master, origin/HEAD) Remove DB Directory removal as part of make clean (#84)
085f29d1247f0333e6038751fa445b6068fcf987 Fix unhandled nil err check to prevent rpc causing a crash (#78)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The unit test failure was due to missing bgp graceful restart select
defer time configuration in voq_chassis.conf. Modified sample output
data file voq_chassis.conf to include this configuration.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
For multiasic, the back end asics use ip addresss of Loopback4096 for BGP router id. In VOQ multi-asic chassis there are no back end asics. All the asics are front end and the iBGP connections are established via Ethernet-IB of asics. Since these asics are not designated as BackEnd, the ip address of interface Loopback0 is used as BGP router id. Since the ip address of Loopback0 is same for all the asics in the line card, same router id is used for voq iBGP configurations and hence the iBGP connections are not established. Changes are done to fix this
Why I did it
In the config_db.json generated by minigraph "admin_status" attribute is missing for the VOQ inband interface port in the PORT table.
How I did it
Changes done to add admin_status attribute for voq inband interface port, if it exists in the PORT table keys.
Why I did it
There are scenarios that End-of-RIB comes from a part of the peers arrives after reconciliation. In such scenarios, if the route selection deferral timer has the default value of 360 seconds, FRR would not set up routes and all routes would be removed after reconciliation. This PR reduces the route selection deferral timer so that at least routes to parts of the peers get restored at the point of reconciliation.
Fix#7488
How I did it
Reduce route selection deferral timer for bgp graceful restart to 15 seconds.
#### Why I did it
Enhance DHCP monitor application following the implementation PR: https://github.com/Azure/sonic-buildimage/pull/7772
#### How I did it
Add the support for monitoring DHCPv6 packets.
#### How to verify it
Install an image with this PR and the implementation PR.
Update sonic-sairedis submodule to include below commits:
84fa50a Revert "[vs]: Start syncd by passing context configuration file and global context index. (#832)" (#859)
736dc3b Remove redudnant mention of platform cisco-8000 (#856)
969ad94 Support for cisco-8000 platform for sonic-sairedis/syncd (#823)
1eacd05 [sairedis] Client/Server add support for SAI stats api (#855)
59fedfa [sairedis] Client/Server support SAI fdb flush api (#853)
5c2aaae [syncd] bulk OID remove requires RID (#854)
7da0894 [sairedis] Client/Server support SAI query API (#848)
443ad36 [sairedis] Style refactor cleanup (#850)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
lazy_re had an issue when importing sonic-cfggen in another application that
uses re.search(). There is no much improvement of lazy_re today after many
other good optimization work done for sonic-cfggen. It served as a quick
temporary solution.
Some quick test for fast-reboot and warm-reboot done on top of 201911 branch:
Fast-reboot: from ASIC reset to ports in up state:
with lazy_re: 18 sec
without lazy_re: 18 sec
Warm-reboot: LAG restoration time:
with lazy_re: 73 sec
without lazy_re: 72 sec
So, there is no real optimization since the number of sonic-cfggen calls is greatly
reduced in latest SONiC. This means it is time to revert this change.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
To include:
> e168f1d 2021-07-19 pettershao-ragilenetworks: [python coverage] fix result color bar (Azure/sonic-platform-common#202)
> 87c81de 2021-07-13 Prince George: Fix Xcvrd crash due to invalid key access in type_of_media_interface, host_electrical_interface, connector_dict (Azure/sonic-platform-common#206)
> 4533f82 2021-06-21 ngoc-do: Add a template function that returns list of asics on module (Azure/sonic-platform-common#185)
> 1e860c5 2021-06-18 Aravind Mani: Fix decode error when parsing EEPROM fields (Azure/sonic-platform-common#199)
> 93641f3 2021-06-17 Sujin Kang: Unifying the platform api for get_pcie_aer_stats with PcieBase (Azure/sonic-platform-common#197)
This update includes the following commits
acb5d84 Neetha John 2021-07-20 [configlet] Python3 compatible syntax for extracting a key from the dict (#1721)
9b7c58b arlakshm 2021-07-20 Load the database global_db only once for show cli (#1712)
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
As per HLD - Azure/SONiC#625
FRR Patches:
0009-Link-local-scope-was-not-set-while-binding-socket-for-bgp-ipv6-link-local-neighbors.patch
Files modified : bgpd_network.c and bgpd/bgp_zebra.c
Fix for : Link local scope was not set while binding socket with local address causing socket errors for bgp ipv6 link local neighbors.
0010-VRF-interface-lookup-was-still-done-in-the-default-vrf.patch
Files modified : staticd/static_zebra.c
Fix for : VRF interface lookup was still done in the default-vrf which was causing the interface lookup to fail. Due to this static-route pointing to link-local was not getting installed.
0011-Changes-to-send-ipv6-link-local-address-as-nexthop-to-fpmsyncd.patch
Files modified : zebra/zebra_fpm_netlink.c
Fix for : Made changes to send ipv6 address as nexthop to fpmsyncd.
Depends on:
Azure/sonic-utilities#1159Azure/sonic-swss#1463
Signed-off-by: Akhilesh Samineni akhilesh.samineni@broadcom.com
It can be that service is not enabled but UnitFilePreset=enabled (case
for Application Extension):
```
Loaded: loaded (/lib/systemd/system/cpu-report.service; disabled; vendor preset: enabled)
```
This makes existing logic skip enabling the service.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Currently SONiC use the 'isc-dhcp-relay' package to allow DHCP relay functionality on IPv4 networks only.
This will allow the IPv6 functionality along the IPv4 type.
How I did it
Edit supervisord template to start DHCPv6 instances when configured to do so on Config DB.
Align cfg unit test to the new change.
Add DHCPv6 relay minigraph parsing support and a suitable t0 topology xml file for UT.
How to verify it
Configure DHCPv6 agents as described on the feature HLD: Azure/SONiC#765
Test it with real client/server with IPv6 or use the dedicated automatic test: Azure/sonic-mgmt#3565
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Split docker-dhcp-relay.supervisord.conf.j2 template into several files for easier code maintenance
To include:
> 66e7817 2021-07-13 [pcied] Fix pcied failure to load due to 'pcied NameError: name 'self' is not defined' (Azure/sonic-platform-daemons#198)
> 3df6757 2021-07-08 [ci] fix result color bar in the code coverage report (Azure/sonic-platform-daemons#196)
Update sonic-snmpagent submodule to pick up new commits:
21d7d97 2021-07-12 Fix: SonicV2Connector behavior change: get_all will return empty dict if (#226)
0813b42 2021-07-12 Entries under .1.3.6.1.2.1.31.1.1.1.18 OID should return the "description" field of PORT_TABLE entries in APPL_DB or CONFIG_DB. (#224)
7a78703 2021-07-08 Install dotnet core to fix python gcov warning for code covery color bar showing (#215)
e0f36a5 2021-06-30 [multi-asic]: Udpate to use SonicDBConfig from swsscommon (#219)
266bd15 2021-06-10 Restored snmp vlan support per RFC1213 and added the missing support for RFC2863 (#218)
#### Why I did it
Update submodule pointer for swss to include recent changes
4f1d726 [portsorch] fix errors when moving port from one lag to another. (#1797)
ae44701 [orchagent] Put port configuration to APPL_DB according to autoneg mode (#1769)
5295f91 Add failure handling for SAI get operations (#1768)
7c7c451 Revert recirc port change (#1813)
5528ebf Cleanup code (#1814)
2d2749a [xcvrd] add debug logs for y_cable change events/probes (#195)
b2c6102 Collect asic info and store in CHASSIS_STATE_DB (#175)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Allow deploying DHCPv6 servers following the implementation PR: #7772
How I did it
Add DHCPv6 to minigraph.py on sonic-cfggen tool and improve the unit test to cover this change.
How to verify it
Try to deploy a switch with DHCPv6 servers.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Why I did it
Static route configuration should not depend on BGP_ASN. Remove the dependency on BGP_ASN for StaticRouteMgr.
Fix#8027
How I did it
Check if BGP_ASN field before configuring static route redistribution and wait until BGP_ASN is available to enable static route redistribution.
How to verify it
Add unit test to cover the scenario and verify the functionality on a virtual switch.
#### Why I did it
Restrict the min-links parameter in "config portchannel" to the range 1-1024.
FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
Align YANG model with limits in libteam and sonic-utilties.
#### How I did it
PR 1630 in sonic-utilities prevents CLI user from entering a value outside the allowed range. This PR does the following:
- Increases the maximum value of min-links from 128 to 1024.
- Provides validation in libteam, incorporating as a patch the code in https://git.kernel.org/pub/scm/linux/kernel/git/jpirko/libteam.git/commit/?id=69a7494bb77dc10bb27076add07b380dbd778592.
- Updates the Yang model upper limit from 128 to 1024 (was inconsistent with libteam value).
- Updates the Yang model lower limit from 1 to 0, since 0 is set as default in sonic-utilities which would fail its new range check otherwise.
- Added Yang tests for valid and invalid value.
#### How to verify it
config portchannel add PortChannel0004 --min-links 1024
Command should be accepted.
show interfaces portchannel
Output should show PortChannel0004, no errors on CLI.
config portchannel add PortChannel0005 --min-links 1025
Command should be rejected
show interfaces portchannel
Output should not show PortChannel0005 , no errors on CLI.
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
Updates YANG model to allow up to 1024 min_links for portchannel. FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
- Why I did it
Currently dhcp packets are disabled by the COPP manager for non ToRRouter type switches.
Even if the feature is enabled, DHCP packets wont hook to the CPU since the COPP manager will not trap this packets.
This change is to disable dhcp_relay by default for non ToRRouter switches from init_cfg.json.
With this approach, if the user want to enable the feature for non ToRRouter switches, manual enablement is required by the 'feature' configuration.
This is to keep the current approach for MSFT production issue with dhcp relay for non ToRRouter switched and allow the user to decide if to use it or not.
- How I did it
Configure dhcp_relay 'disabled' by default on init_cfg.json for non ToRRouter switches.
Remove the exclusion of dhcp packets on copp_cfg.json
- How to verify it
Enable dhcp_relay feature on a non ToRRouter switch.
Unit-tests modified so the default values on mocked CONFIG DB in 'test_vectors.py' for dhcp_relay will be 'disabled'.
This is by the change for 'init_cfg.json.j2'.
For ToRRouter the state will change from 'disabled' to 'enabled'.
Another test case added for a 'ToR' switch type, this is to test the state is 'enabled' if the user configured it to be so.
Why I did it
systemd-sonic-generator limits multi-asic unit file instances to 10 (single digit instance number 0 - 10). This limitation needs to be removed to handle more than 10 asics.
MAX_NUM_TARGETS and MAX_NUM_INSTALL_LINES limits to 15 which is not sufficient for systems with more than 15 asics.
Inside get_unit_files(), strcmp produce incorrect results due to non null terminated string being compared.
Added build UT support for systemd-sonic-generator
Changes:
3c485e5 [recorder] Fix incorrect attribute enum value capability query (#843)
677ebca [sairedis] Client/Server support zmq configuration file (#845)
7c70e34 [sairedis] Add support for bulk api in client/server (#844)
76d28a6 [pyext] Use SAI autogenerated saiswig.i (#837)
9949c48 [vslib] implement query for SAI_DEBUG_COUNTER_TYPE enum values (#842)
e385212 [MPLS] Minor tweaks to VS for MPLS support for CRM polling of MPLS In-segments and NHs.
d819f97 [meta] Add support for ignored attributes names (#836)
c163238 Add cisco-8000 checks to syncd_init_common (#839)
9aed2ff [sairedis] Add support for client server architecture (#838)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Updates:
888701b [Mellanox] Remove mstdump from Mellanoxs collect dump script ([Azure/sonic-utilities#1706])
4818360 [sonic-package-manager] support warm/fast reboot for extension packages ([Azure/sonic-utilities#1554])
793b847 [show priority-group drop counters] Remove backup with cached PG drop counters after 'config reload' ([Azure/sonic-utilities#1679])
24fe1ac [show][config] support for interface alias for muxcable commands ([Azure/sonic-utilities#1699])
Why I did it
Currently hostcfgd is implemented in a way each feature which is enabled/disabled triggering execution of systemctl enable/unmask commands which eventually trigger 'systemctl daemon-reload' command.
Each call like this cost 0.6s and overall add a overhead of ~12 seconds of CPU time.
This change will verify the desired state of a feature and the current state of this feature on systemd and trigger a system call only when must.
How I did it
Check each feature status on systemd before executing a system call to enable and reload the systemctl daemon.
How to verify it
Build an image with this change and observe less system calls are executed.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
186d8513 Pcieutil to load the platform api first instead of using common api (#1672)
7a82c069 [Mellanox] Update mellanox dump generation to include SDK dumps (#1640)
38f8c068 [sfputil] Expose error status fetched from STATE_DB or platform API to CLI (#1658)
c5d00ae4 [pfcwd] Fix the return code in invalid case (#1691)
57dc4032 [ci]: Fix config prompt question issue (#1693)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Before this change, a process running inside every SONiC container dealt with FEATURE table 'auto_restart' field and depending on the value decided whether a container has to be killed or not.
If killed service auto restart mechanism restarts the container.
This change moves the logic from container to the host daemon - hostcfgd.
The 'auto_restart' handling is kept in supervisor-proc-exit-listener but now it is not required for container that wants to support auto restart feature.
hostcfgd refactoring - move feature handling in another class.
override systemd service Restart= setting from hostcfgd.
remove default systemd Restart=always.
Signed-off-by: Stepan Blyshchak stepanb@nvidia.com
- Why I did it
Remove the need to deal with container orchestration logic from the container itself. Leave this logic to the orchestrator - host OS.
- How I did it
hostcfgd configures 'Restart=' value for systemd service.
- How to verify it
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp enabled
root@r-tigon-11:/home/admin# show feature status | grep lldp
lldp enabled enabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 20 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 5 seconds lldp
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp disabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 35 seconds lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 3 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 39 seconds ago lldp
root@r-tigon-11:/home/admin#
Advance submodule head for sonic-swss
32261636 [BufferOrch] Don't call SAI API for BUFFER_POOL/PROFILE handling in case the op is DEL and the SAI OID is NULL (Azure/sonic-swss#1786)
6c88e47a [Dynamic Buffer Calc][Mellanox] Bug fixes and enhancements for the lua plugins for buffer pool calculation and headroom checking (Azure/sonic-swss#1781)
e86b900d [MPLS] sonic-swss changes for MPLS (Azure/sonic-swss#1686)
4c8e2b53 [Dynamic Buffer Calc] Avoid creating lossy PG for admin down ports during initialization (Azure/sonic-swss#1776)
36021246 [VS test stability] Skip flaky test for DPB (Azure/sonic-swss#1807)
c37cc1c5 Support for in-band-mgmt via management VRF (Azure/sonic-swss#1726)
1e3a532d Fix config prompt question issue (Azure/sonic-swss#1799)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
A recent version of contextlib2 (https://pypi.org/project/contextlib2/21.6.0/#history) has broken Python2 compatibility, so the version picked up by netaddr when using Python2 must be specified, or else builds fail
Co-authored-by: Tom Zhu <tom.zhu@metaswitch.com>
#### Why I did it
To ensure any environment variables which are configured in the build/test environment do not influence the behavior of sonic-py-common during unit tests. For example, variables which might be set by continuous integration pipelines.
#### How I did it
Add class-scoped pytest fixture to `TestDeviceInfo` class which stashes the current environment variables, clears them and yields. Once all the test cases in the class finish, the fixture will restore the original environment variables.
Also remove unnecessary unittest-style setup and teardown functions from interface_test.py
Advance submodule update with the following changes:
4475750 Config reload fix (#29)
cf60d5e [ci]: add proper azp (#26)
f0fbfe7 [CI] Set up CI with Azure Pipelines (#25)
879d7bd Include port default fec configuration to be included in ZTP configuration (#24)
a6ae955 Add a pre-defined plugin to download a list of files (#23)
6f0305b [MultiDB] Add multidb support to sonic-ztp (#16)
Discussion and requirement in Chassis discussion forum to NOT make the asic-id field in the DEVICE_METADATA mandatory. If this field "asic-id" is not present the orchagent will be started without the -i <asic_id> parameter
Ref: https://github.com/Azure/sonic-buildimage/blob/master/dockers/docker-orchagent/orchagent.sh#L39
How I did it
Made the check to see if the asic-id is valid and update the asic-id field in the DEVICE_METADATA
5708497 [show] fix show version (#1686)
9041ba0 [config] Adding sanity checks for config reload (#1664)
2cdadb5 [config]: Create portchannel with LACP key (#1473)
6f74ba5 [vnet_route_check] Fix logic for getting VNET routes from ASIC DB (#1653)
54fee0f Add range check on portchannel min-links (#1630)
