Includes following commits
9297a29 Mock path early so it will applied to sonic_py_common, mock platform_chassis (#188)
9ba52a2 Mock path early so it will applied to sonic_py_common, mock more swsscommon classes (#187)
1adf47b [chassisd] Add script to initialize chassis info in STATE_DB (#183)
Includes the following commits
295b68c Add return codes for FW install to component_base constants (#189)
e8e617d [sonic_sfp] Handle QSFP DD keys gracefully (#188)
Why I did it
k8s handles in lower case, so the code ensures that it uses hostname in all lower case
How I did it
Wrapper for device_info.get_hostname that returns in lower case. This wrapper is used in all places that require hostname to use in kubectl commands.
How to verify it
Device joins successfully.
When FECDisabled is set to true in minigraph.py, push 'fec' 'none' explicitly to config_db. When 'fec' is defined in port_config.ini do not override it with 'rs' for 100G
#### Why I did it
Update sonic-snmpaget submodule to pick up new commits:
> Extend rfc3433.py to support more Physical Entity Sensor MIB entries 28b9dfd3a2
#### How I did it
update the submodule pointer to including the new commits
#### How to verify it
run community snmp test.
Why I did it
Currently, there is a bug in the ntp.conf jinja2 template where it will ignore the src_intf directive in CONFIG_DB if there are multiple IP addresses associated with an interface. This code change fixes that bug and allows the template to select the correct source interface for NTP.
How I did it
I did this by modifying the macro in ntp.conf.j2 which determines if there is an ip address associated with an interface to set a state variable when it detects a valid interface entry in CONFIG_DB instead of outputting "true" directly (which could result in multiple "trues" outputted for interfaces with multiple valid IP addresses).
How to verify it
Add two ipv4 addresses to an interface in SONiC
Add the following configuration to config_db.json
{
"NTP": {
"global": {
"src_intf": "Ethernet1"
}
}
}
Replace Ethernet1 with the interface name of the one you assigned the IP addresses to.
Run sudo config reload -y
Open /etc/ntp.conf and verify that the following line exists
...
interface listen Ethernet1
...
The interface specified should be the one set in the previous steps.
Description for the changelog
[ntp] Fix ntp.conf template to allow setting of source port in CONFIG_DB
Signed-off-by: Neetha John nejo@microsoft.comFixes#7531
Why I did it
To enable bgp sessions to be established over subinterfaces
How I did it
Listen to VLAN_SUB_INTERFACE table in config db
How to verify it
Bgp sessions were established successfully over subinterface
Why I did it
Enable redistribution of static routes
How I did it
Enable redistribution of static routes when the first route is added to STATIC_ROUTE table of Config_DB and disable the redistribution when the last route is removed from STATIC_ROUTE table.
This PR updates the following commits in sonic-platform-daemons
e60804c [xcvrd] add support for logging mux_metrics events into state DB (#185)
807b304 [psud] Add PSU Hardware Revision to Redis STATE_DB (#179)
d0be634 [muxcable] Remove Xcvrd Sleep (#174)
cc3803f [thermalctld] Enable stopping thermal manager (#180)
665fcd9 [xcvrd] Fix crash for QSFP DD media (#181)
cdabd09 [xcvrd] Change the y_cable presence logic to use "mux_cable" table as identifier from Config DB (#176)
4be4306 [xcvrd] Enhance Media Settings (#177)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Skip to use the web proxy when the packages have been in the proxy server.
For sai packages or the other packages, we will upload the the proxy server directly, the reproducible will skip to check the site, not necessary to change the version files.
[config]Static routes to config_db (#1534)
[DPB]: Shut down interface before dynamic port breakout (#1303)
[vlan] remove dhcp-relay as dhcp-relay commands will come as a plugin (#1378)
Add 'default' option for sFlow. (#1606)
[Command-Reference.md] Document new SNMP show and config commands (#1600)
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
1213d61 [thermal_manager_base] Add a stop function to thermal manager (#187)
a95834b [DeviceBase] Added hardware revision number to generic device properties (#184)
f4901a0 [voqinbandif]To support inband port as front panel port (#159)
To include PortChannel as Vlan Member (in addition to the already existing physical port)
Signed-off-by: Arthi Sivanantham <arthi_sivanantham@dell.com>
9a88cb6 [sonic_installer] dont fail package migration (#1591)
615e531 [show][config] Add new snmp commands (#1347)
fff4051 Fixing serial number read to get from DB if it is populated (#1580)
be974bf [neighbor_advertiser] Use existing tunnel if present for creating tunnel mappings (#1589)
9492eab Use swsscommon instead of swsssdk (#1510)
0f4988b Add pg-drop script to sonic filesystem (#1583)
cbe2159 [vnet] Add "vnet_route_check" script (#1300)
9120766 Relax the install_requires, no need to exact version as long as there are no broken changes with future versions (#1530)
2e09b22 Handle the new db version which mellanox_buffer_migrator isn't interested (#1566)
https://github.com/mbj4668/pyang/blob/master/pyang/repository.py#L93 throws an exception with pip 21.1
add ietf yang model explicitly to the build process fix the test failure.
tests/test_sonic_yang_models.py .F [ 66%]
tests/yang_model_tests/test_yang_model.py . [100%]
Failed: pyang -f tree ./yang-models/*.yang > ./yang-models/sonic_yang_tree
----------------------------- Captured stderr call -----------------------------
./yang-models/sonic-acl.yang:8: error: module "ietf-inet-types" not found in search path
./yang-models/sonic-device_metadata.yang:8: error: module "ietf-yang-types" not found in search path
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Why I did it
ndppd by default reads /proc/net/ipv6_route ever 30 seconds. Since T1s advertise so many routes to ToRs, this file is extremely large, and reading it causes ndppd's CPU usage to spike every 30 seconds
How I did it
Increase the delay for reading this file to the maximum possible value (max integer value), which will result in CPU spikes every ~24 days instead of every 30 seconds
How to verify it
Start ndppd with the new config file, confirm that no CPU spikes are seen except at startup
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
08337aa [sonic-package-manager] first phase implementation of sonic-package-manager (#1527)
c166f66 [multi-asic] support show ip bgp neigh/network for multi asic (#1574)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Previously, a brief sleep was necessary in order to get Python threads to progress. The root cause of this has since been found and fixed in sonic-swss-common: Azure/sonic-swss-common#477. The submodule was updated here, so we can now safely remove this sleep.
This PR should also be cherry-picked to the 202012 branch once the submodule is updated there to also include the fix.
[flex-counters] Delay flex counters stats init for faster boot time (Azure/sonic-swss#1646)
[routeorch] Add support for blackhole routes (Azure/sonic-swss#1723)
Update pool sizes during initialization from timer only (Azure/sonic-swss#1708)
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
99ad210 [Mellanox] backport kernel patches for hw-management 7.0100.2303 (#211)
- Why I did it
Update submodule pointer for sonic-linux-kernel to include kernel patches for hw-mgmt 7.0100.2303
- How I did it
Update submodule pointer for sonic-linux-kernel
* 9dba93f disk_check: Check & mount RO as RW using tmpfs (#1569)
* c3963c5 Fix remove ip rif (#1535)
* 41d8ddc [config][generic-update] Adding apply-patch, rollback, checkpoints commands (#1536)
* a3d37f1 [console] Display success message after line cleared (#1579)
* b10c157 RADIUS Management User Authentication Feature (#1521)
* 59ed6f3 platform pre-check for reboot in master branch (#1556)
* f5efe89 [acl] Use a list instead of a comma-separated string for ACL port list (#1519)
* e296a69 No more IP validation as it is more likely a URL (#1555)
* d5f5382 [CLI][queue counters] add JSON output option for queue counters (#1505)
* 176cc4a 1) Loopback interfaces with valid nexthop IP are not ignored/treated as loopback. (#1565)
* 149ccbd [techsupport] Update show ip interface command (#1562)
* 0e84418 Stop PMON docker before cold and soft reboots (#1514)
* eba5c04 Fix Multi-ASIC show specific resursive route by using common parsing function (#1560)
* e57e7f7 cache the bvid to vlan translations (#1523)
* 38f9f60 sonic-installer: fix py3 issues in bootloader.aboot (#1553)
* 02b263a [voq/inbandif] Voq inbandif port (#1363)
* 0539789 [load_minigraph]: Avoid starting PFCWD for EPMS devicetype (#1552)
* 030293c Use 'importlib' module in lieu of deprecated 'imp' module (#1450)
* 50e5c61 Fixed the possibility of using uninitialized variable in route_check.py (#1551)
This commit contains the following changes to support for configuring a VoQ switch using a minigraph.xml file.:
- Add support for system ports configuration to minigraph
- Add support for SwitchId, SwitchType and MaxCores to minigraph
- Add support for inband vlan configuration in minigraph
- `asic_name` is now a mandatory attribute in CONFIG_DB on VoQ switches
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
- Why I did it
The fix for the issue [DPB][YANG] sonic-device_metadata.yang is not aligned with newest changes in CONFIG_DB
- How I did it
CONFIG_DB was extended with the field buffer_model - added representation of this field inside the sonic-device_metadata.yang
- How to verify it
Run the command config interface breakout <interface> <breakout_mode>
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
What/Why I did:
Updated sonic-sairedis submodule to use SAI1.8.1
[Submodule update] sonic-sairedis
d821bc0b137264daa01c347700c7c14677cf3370 (HEAD -> master, origin/master, origin/HEAD) [Mellanox] Add SAI template
config support (#803)
bb341e9ea069e974a41930d434d437f522476f29 [syncd] Bring back TimerWatchdog (#821)
badf6cea2650015269420932a9186113d1ad5ec6 Update .gitignore (#822)
1494bc69046ffe7135377844548a11e4168b407c [meta] Mark local function static (#818)
34e961cf39e9af93f492f66640739e1c7a1694c8 [pyext] Fix pyext/py2 library (#820)
0d3749d3a93fd7e59ebb83b49fa1d7e2a56d6cf4 Moved SAI Header to git tag v1.8.1 (#816)
70fff780d529f78b53af4bd104f4932d0c4d8dd6 Added --purge of base docker image packages before installing new ones. (#819)
Updated Broadcom SAI Debian package to 4.3.3.4-2 to use SAI 1.8.1 Header
Update the sonic-swss submodule. The following is the new commit in the submodule.
```
b34f783 Resolve neighbor when nexthop does not exist (#1704)
500e2e9 [voq/inbandif] Voq inbandif port (#1602)
9f22ba7 Handle IPv6 and ECMP routes to be programmed to ASIC (#1711)
1b916c3 [acl] Add regression test for `config acl` CLI command (#1694)
8bc7aee Allowing the first time FEC and AN configuration to be pushed to SAI (#1705)
d0dd6ee [Dynamic buffer calc][Mellanox] Fix bug: buffer over subscription in buffer pool size calculation (#1706)
d8b8ca9 fix for CRM available bug (#1699)
97f70d1 NAT : Update the CRM used counters for SNAT and DNAT entries (#1655)
a4e05a7 [vstest] System lag test timing issue fix (#1692)
ca8ba6d [vlan] Add support of VLAN host interface (#1645)
#### Why I did it
To build flashrom properly with dependency tracking.
#### How I did it
Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
4e063e4 [ci]: setup proper azp
22ae215 [pytest]: add junit xml test result
80171a3 [SNMP] Update description of entPhysicalDescr mib in case interface is not configured. (#205)
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
804c9f9 [sonic-swss-common] Add a string utilities function to join items in a container (#463)
1e924ac Fix: ConfigDBConnector call super init with proper parameter name (#470)
70e02c8 [azp] Purge swss before installing the newly built deb package (#472)
15c0f72 [swig] translate SonicV2Connector::keys return type from C++ vector to Python list (#468)
1) Dropped non-required IP update in admin.conf, as all masters use VIP only (#7288)
2) Don't clear VERSION during stop, as it would overwrite new version pending to go.
3) subprocess, get return value from proc and do not imply with presence of data in stderr.
* Add "bgp bestpath peer-type multipath-relax" to frr
This new BGP configuration is akin to "bgp bestpath aspath multipath-relax".
When applied, paths learned from different peer types will be eligible
to be considered for multipath (ECMP). Paths from all of eBGP, iBGP, and
confederation peers may be included in a multipath group if they are
otherwise equal cost.
When such a multipath group is created, it is not desirable for
iBGP nexthops to be discarded from the FIB because they are not directly
connected. So when publishing the nexthop group to zebra, bgpd will allow
recursive resolution, but only when there are iBGP-learned paths in the
group.
This change is merged in FRR in this PR FRRouting/frr#8056
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
