Added support BRCM SAI 5.0.0.1.
Major changes here:
CS00012019568 Link Training (all 100G ASICs - TH families and TD3)
CS00012184310 [attribute_capability| for port SAI_PORT_ATTR_TPID returns CREATE_IMP=false|SET_IMP=true|GET_IMP=true
CS00012182145 [IPinIP][Tunnel Delete] If IPinIP tunnel delete is performed observed following SYNCd error: ERR syncd#syncd: [none] SAI_API_TUNNEL:brcm_sai_tnl_mp_remove_tunnel_term_table_entry:4026 _brcm_sai_mptnl_sip_tnl_lookup failed with error -7.
CS00012182148 Rate Limit Parity error message to syncd/sonic.
CS00012178692 ACL drops counted as interface drops
CS00012183901 [WARMBOOT] WARMReboot with active traffic causes port flap reported during warm reboot
CS00012023263 TD3/TH2 : Support 4 lossless queues(2 SW PFCWD and 2 HW PFCWD)
CS00012019578 Pre FEC bit-error rate (BER) - DNX and XGS (TD and TH 50/100G)
To fix determine-reboot-cause service which was failing due to non-implemented thrown from get_reboot_case, if the reboot was done with `sudo reboot` (cold reboot)
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
Why I did it
* For SAI - Upgrade to Version 1.19.0
- Add support for VxLAN encap TTL uniform model on SPC2/3
- Add ACL entry actions set VRF, set do no learn, add VLAN ID, add VLAN priority
- Add ACL field has VLAN tag
- Bulk counters (improve port statistics performance)
- Create async dump extra as part of debug generate dump
- Create irisc dump on severe health event
- Support 0 port systems (modify get switch mac to work accordingly)
- Set interface vlan up state for ping tool in SONiC
- Support attributes SAI_PORT_ATTR_QOS_SCHEDULER_PROFILE_ID, SAI_PORT_ATTR_QOS_INGRESS_BUFFER_PROFILE_LIST,
SAI_PORT_ATTR_QOS_EGRESS_BUFFER_PROFILE_LIST, SAI_PORT_ATTR_POLICER_ID as part of port create Git stats
* For SDK\FW - Upgrade to Version SDK 4.4.3106, FW 2008_3110
Added Features:
- Increased ACL table
- Enhanced PSAMPLE support
- Added support for Finisar SR4 module in SN3700 systems
- Added support for Python 3.0 in examples.
Fix bugs:
- On LR4 transceivers 00YD278, the firmware incorrectly identified the transceiver
- Reduce memory consumption for virtual LAG
- Fixed PSAMPLE listeners cleanup on SDK drivers unloading.
- On Spectrum-2 and Spectrum-3 systems, slow reaction time to Rx pause packets may lead to buffer overflow on servers.
- BER may be experienced when using 5m DAC cables between SN4700 and SN2700 in 100GbE speed.
- On very rare occasion, when connecting DR4 PAM4 transceiver to 100GbE DR1 NRZ, low BER may be experienced.
- Unexpected packet drops on the port ingress buffer may be experienced when working in 400GbE mode.
Note: When performing ISSU from an older version, this fix won't be applied. For fix to apply, a non-ISSU reset is required.
- Fix SN3800 specific warm boot scenario: Disable interface, Warm Boot, Enable Interface --> link will remain down.
Signed-off-by: Dror Prital <drorp@nvidia.com>
This is due to the fact that we use SONIC_OVERRIDE_BUILD_VARS internally
in our build jobs and this is not accounted in caching framework.
So we add MLNX_SDK_DEB_VERSION to force rebuild if we changed it via
SONIC_OVERRIDE_BUILD_VARS.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
#### Why I did it
- After [sonic-linux-kernel#177](https://github.com/Azure/sonic-linux-kernel/pull/177) changes, the I2C mux channels of Baseboard and Switchboard CPLDs are moved from i2c-4 and i2c-5 to i2c-36 and i2c-37 respectively.
- This caused QSFP driver initialization of i2c-36 to i2c-41 to fail causing the ports from Ethernet208 to Ethernet248 fail.
#### How I did it
- The fix to this problem is to change the order of QSFP driver initialization to I2C mux channels.
- Instead of the order i2c-10 to i2c-41, the order i2c-4 to i2c-35 is being utilized.
- Also, need to change the i2c-mux-channel number for Baseboard CPLD and switchboard CPLD in scripts to access them.
Signed-off-by: Yong Zhao yozhao@microsoft.com
Why I did it
Currently we leveraged the Supervisor to monitor the running status of critical processes in each container and it is more reliable and flexible than doing the monitoring by Monit. So we removed the functionality of monitoring the critical processes by Monit.
How I did it
I removed the script process_checker and corresponding Monit configuration entries of critical processes.
How to verify it
I verified this on the device str-7260cx3-acs-1.
#### Why I did it
On our platforms syncd must be up while using the sonic_platform.
The issue is warm-reboot script first disables syncd then instantiate Chassis, which tries to connect syncd in __init__.
#### How I did it
Refactor Chassis to lazy initialize components.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
- Why I did it
To give SONiC Application Extension developers an environment to run and develop their apps.
- How I did it
Created sonic-sdk and sonic-sdk-buildenv dockers and their dbg versions.
- How to verify it
Build:
$ make -f slave target/sonic-sdk.gz target/sonic-sdk-buildenv.gz
- Why I did it
Pick up fix from new hw-management package:
Fix gearbox thermal zone name, which was lack suffix thermal zone number
- How I did it
Update the hw-management version number in the make file
Update hw-management submodule pointer
- How to verify it
Run platform related test cases on Mellanox platform
- Fix `thermal.get_position_in_parent` issue which causes test_snmp_phy_entity failure
- Add support for xcvr thermal info so that thermalctld can incorporate it into the cooling algorithm (QSFP and OSFP/QSFP-DD modules only)
- Add improvements to `arista` CLI
#### Why I did it
To fix the following:
```
# psuutil status
Traceback (most recent call last):
File "/usr/local/bin/psuutil", line 8, in <module>
sys.exit(cli())
File "/usr/local/lib/python3.7/dist-packages/click/core.py", line 764, in __call__
return self.main(*args, **kwargs)
File "/usr/local/lib/python3.7/dist-packages/click/core.py", line 717, in main
rv = self.invoke(ctx)
File "/usr/local/lib/python3.7/dist-packages/click/core.py", line 1137, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File "/usr/local/lib/python3.7/dist-packages/click/core.py", line 956, in invoke
return ctx.invoke(self.callback, **ctx.params)
File "/usr/local/lib/python3.7/dist-packages/click/core.py", line 555, in invoke
return callback(*args, **kwargs)
File "/usr/local/lib/python3.7/dist-packages/psuutil/main.py", line 93, in status
psu_name = psu.get_name()
File "/usr/local/lib/python3.7/dist-packages/sonic_platform_base/device_base.py", line 28, in get_name
raise NotImplementedError
NotImplementedError
```
#### How I did it
Implemented get_name
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
#### Why I did it
According to thermalctld hld, each fan must belong to a fan drawer, if the fan drawer does not physically exist, put fan into a virtual fan drawer. This PR is to clear fan from chassis._fan_list
#### How I did it
1. Don't put fan to chassis._fan_list
2. Always query fan from fan_drawer
#### Why I did it
This pull request allows calls to be made through the platform 2.0 API that retrieve the PSU and Chassis hardware revision on Mellanox platforms. Access to these values will aid customers in determining their hardware revisions for debugging and technical support. These values are intended to be eventually exposed through the CLI.
#### How I did it
For the PSU hardware revision I used the existing VPD function calls implemented in https://github.com/Azure/sonic-buildimage/pull/7382
For the Chassis hardware revision I parsed the SMBIOS / DMI type 2 information to retrieve the information.
#### Why I did it
xcvrd crashes when the application advertisement capability flag is not seen for few transceivers.
#### How I did it
Initialize the additional application capability in dunder init
Add support for Accton as9726-32d platform
This pull request is based on as9716-32d, so I reference as9716-32d to create new model: as9726-32d.
This module do not need led driver to control led, FPGA can handle it.
I also implement API2.0(sonic_platform) for this model, CPLD driver, PSU driver, Fan driver to control these HW behavior.
Why I did it
Fix issues below.
#7133#6602
So, remove the dps200 driver from the platform-specific driver.
Then, add the dps200 module driver to the Linux kernel tree.
How I did it
Remove the dps200 driver from the platform-specific driver and add the dps200 module driver to the Linux kernel.
How to verify it
Build an image with Azure/sonic-linux-kernel#207
Then, install to the Haliburton.
LED_PROC_INIT_SOC variable was incorrectly referenced as LED_SOC_INIT_SOC. Introduced in #5483
Rather than fixing the typo, I decided to simplify the script, removing the need for the conditional altogether by moving the bcmcmd call inside the conditional which checks for the presence of LED_SOC_INIT_SOC.
Fix following crash in `show version`:
```
Traceback (most recent call last):
File "/usr/local/bin/decode-syseeprom", line 32, in instantiate_eeprom_object
eeprom = sonic_platform.platform.Platform().get_chassis().get_eeprom()
AttributeError: module 'sonic_platform' has no attribute 'platform'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/bin/decode-syseeprom", line 262, in <module>
sys.exit(main())
File "/usr/local/bin/decode-syseeprom", line 244, in main
print_serial(use_db)
File "/usr/local/bin/decode-syseeprom", line 169, in print_serial
eeprom = instantiate_eeprom_object()
File "/usr/local/bin/decode-syseeprom", line 34, in instantiate_eeprom_object
log.log_error('Failed to obtain EEPROM object due to {}'.format(repr(e)))
NameError: name 'log' is not defined
```
Signed-off-by: pettershao-ragilenetworks <pettershao@ragilenetworks.com>
Platform library changes
- Fix the use of /proc/modules during testing, fixes#7463
- Add `libsfp-eeprom.so` build to read/write xcvr eeproms in C
- Add some more reboot-cause information
- Write down temperature hw thresholds to the sensors
- Report software thresholds through platform api
- Writ `port_name sysfs` file of optoe`
- Tests enhancements
- Fix dependency issues for chassis provisioning
Platform configuration changes
- Add `pcie.yaml` configuration for a few platforms
- Mount `libsfp-eeprom.so` inside `pmon`
- Fix `Arista-7050SX3-48C8` and `Arista-7050SX3-48YC8' platform and hwsku
- Miscellaneous fixes
Co-authored-by: Boyang Yu <byu@arista.com>
Co-authored-by: Zhi Yuan Carl Zhao <zyzhao@arista.com>
Originally, SFP modules were always accessed from platform daemons, and arbitrary SFP modules can be accessed in the daemon. So all SFP modules were initialized in one shot once one of the following chassis APIs called
- get_all_sfps
- get_sfp_numbers
- get_sfp
Recently, we noticed that SFP modules can also be accessed from CLI, eg. the latest refactor of `sfputil`.
In this case, only one SFP module is accessed in the chassis object's life cycle.
To initialize all SFP modules in one shot is waste of time and causes the CLI to take much more time to finish.
So we would like to optimize the initialization flow by introducing a two-phase initialization approach:
- Partial initialization, which means the `chassis._sfp_list` has been initialized with proper length and all elements being `None`
- Full initialization, which means all elements in `chassis._sfp_list` are created
If the relevant function is called,
- `get_sfp`, only partial initialization will be done, and then the specific SFP module is initialized.
- `get_all_sfps` or `get_num_sfps`, full initialization will be done, which means all SFP modules are initialized.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
#### Why I did it
400G media EEPROM and DOM information are not populated properly in DellEMC Z9332f platform.
#### How I did it
Handled QSFP_DD, QSFP28/QSFP+, SFP+ accordingly based on media type detected.
- Why I did it
Updated FW to xx.2008.2526 version.
Fixed issues:
1. Spectrum-2, Spectrum-3 | sFlow | High CPU load and high on fully loaded switch.
2. Spectrum-2, Spectrum-3 | Fine grain LAG | in rare cases doesn’t update the right entry
- How I did it
Updated submodule pointer and version in a Makefile.
- How to verify it
Full regression and bugs validation
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
#### Why I did it
We want to add the ability for the command `show platform psustatus` to show the serial number and part number of the PSU devices on Mellanox platforms. This will be useful for data-center management of field replaceable units (FRUs) on switches.
#### How I did it
I implemented the platform 2.0 functions `get_model()` and `get_serial()` for the PSU in the mellanox platform API by referencing the sysfs nodes provided by the [hw-management](https://github.com/Azure/sonic-buildimage/tree/master/platform/mellanox/hw-management) module.
#### Why I did it
Adopt a single way to get fan direction for all ASIC types.
It depends on hw-mgmt V.7.0010.2000.2303. Depends on https://github.com/Azure/sonic-buildimage/pull/7419
#### How I did it
Originally, the get_direction was implemented by fetching and parsing `/var/run/hw-management/system/fan_dir` on the Spectrum-2 and the Spectrum-3 systems. It isn't supported on the Spectrum system.
Now, it is implemented by fetching `/var/run/hw-management/thermal/fanX_dir` for all the platforms.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Removed the old function for detecting a faulty fan.
- Removed the old function for detecting excess temperature.
- Implement thermal_manager APIs based on ThermalManagerBase
- Implement thermal_conditions APIs based on ThermalPolicyConditionBase
- Implement thermal_actions APIs based on ThermalPolicyActionBase
- Implement thermal_info APIs based on ThermalPolicyInfoBase
- Add thermal_policy.json
The following error message is observed during chassis object being destroyed
"Exception ignored in: <function Chassis.__del__ at 0x7fd22165cd08>
Traceback (most recent call last):
File "/usr/local/lib/python3.7/dist-packages/sonic_platform/chassis.py", line 83, in __del__
ImportError: sys.meta_path is None, Python is likely shutting down
The chassis tries to import deinitialize_sdk_handle during being destroyed for the purpose of releasing the sdk_handle.
However, importing another module during shutting down can cause the error because some of the fundamental infrastructures are no longer available."
This error occurs when a chassis object is created and then destroyed in the Python shell.
- How I did it
To fix it, record the deinitialize_sdk_handle in the chassis object when sdk_handle is being initialized and call the deinitialize handler when the chassis object is being destroyed
- How to verify it
Manually test.
- Why I did it
Upgrade hw-mgmt to 7.0100.2303
Bug fixes
1. Fan direction feature fix for fixed FAN system (using shell instead of binutils/strings)
2. Remove cpld 4th link on systems with only 3 CPLD's
3. hw-mgmt: thermal: Add hardcoded critical trip point. Follow-up after patch "Removing critical thermal zones to prevent unexpected software system shutdown".
4. Fix sensor attribute mapping to be label based instead of index based to allow common handling of voltage regulator names independently of hardware changes.
5. Update 'lm-sensors' custom configuration file. Relevant only for users utilizing sensors.conf files coming along with hw-management package.
6. For full feature list please follow https://github.com/Mellanox/hw-mgmt/blob/V.7.0010.2300_BR/debian/Release.txt
- How I did it
Update hw-mgmt pointer
Remove unused patches
Fix existing patch to make sure it apply successfully
- How to verify it
Full platform regression on all mellanox platforms
Changes in the new release:
Fix 10G and 50G speeds in SAI XML to support all interface types
Enable SMAC=DMAC and SMAC MC in tunnel debug counter
Add tunnel statistics
Add isolation group API implementation
Fix ACL ANY debug counter to correctly track ACL drops
Add VXLAN source port hard coded range, controlled by K/V
FW dump me now feature
Add mlxtrace to saidump
Speed lane setting and AN control
Implement query stats API
VNI miss part of tunnel decal drop reason
Align with SAI API v1.8.1
Signed-off-by: Dror Prital <drorp@nvidia.com>
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
This PR is part of SONiC Application Extension
Depends on #5938
- Why I did it
To provide an infrastructure change in order to support SONiC Application Extension feature.
- How I did it
Label every installable SONiC Docker with a minimal required manifest and auto-generate packages.json file based on
installed SONiC images.
- How to verify it
Build an image, execute the following command:
admin@sonic:~$ docker inspect docker-snmp:1.0.0 | jq '.[0].Config.Labels["com.azure.sonic.manifest"]' -r | jq
Cat /var/lib/sonic-package-manager/packages.json file to verify all dockers are listed there.
What/Why I did:
Updated sonic-sairedis submodule to use SAI1.8.1
[Submodule update] sonic-sairedis
d821bc0b137264daa01c347700c7c14677cf3370 (HEAD -> master, origin/master, origin/HEAD) [Mellanox] Add SAI template
config support (#803)
bb341e9ea069e974a41930d434d437f522476f29 [syncd] Bring back TimerWatchdog (#821)
badf6cea2650015269420932a9186113d1ad5ec6 Update .gitignore (#822)
1494bc69046ffe7135377844548a11e4168b407c [meta] Mark local function static (#818)
34e961cf39e9af93f492f66640739e1c7a1694c8 [pyext] Fix pyext/py2 library (#820)
0d3749d3a93fd7e59ebb83b49fa1d7e2a56d6cf4 Moved SAI Header to git tag v1.8.1 (#816)
70fff780d529f78b53af4bd104f4932d0c4d8dd6 Added --purge of base docker image packages before installing new ones. (#819)
Updated Broadcom SAI Debian package to 4.3.3.4-2 to use SAI 1.8.1 Header
New features and fixes in the new SDK/FW:
SN4600C | AN/LT support
SN2700 | AN/LT bugs fixes
WJH | FID_MISS support
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
To build flashrom properly with dependency tracking.
#### How I did it
Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Support compile sonic arm image on arm server. If arm image compiling is executed on arm server instead of using qemu mode on x86 server, compile time can be saved significantly.
- Add kernel argument systemd.unified_cgroup_hierarchy=0 for upgrade systemd to version 247, according to #7228
- rename multiarch docker to sonic-slave-${distro}-march-${arch}
Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>
Co-authored-by: Shi Lei <shil@centecnetworks.com>
- Fix build issue when `/proc/cmdline` is not available. Fixes#7145
- Properly detect linecard slot from linecard CPU
- Some fixes on the uart link between supervisor and linecard CPU
- Other small fixes
#### Why I did it
- xcvrd crash was seen in latest 201811 images.
- For Dell S6100,API 2.0 uses poll mode while 1.0 was still using interrupt mode.
#### How I did it
- Modified get_transceiver_change_event in 1.0 to poll mode.
- Why I did it
Add missed files for dynamic buffer calculation for ACS-MSN3420 and ACS-MSN4410
- How I did it
asic_table.j2: Add mapping from platform to ASIC
Add buffer_dynamic.json.j2 for ACS-MSN4410.
- How to verify it
Check whether the dynamic buffer calculation daemon starts successfully.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Platform API
- Fix Watchdog get_remaining_time logic
- Improve Sfp platform API implementation
- Improve EepromDecoder API implementation
- Fix mismatch between Fan name and platform.json
- Add PSU get_maximum_supplied_power
Internal
- Refactor of Xcvr declaration and initialization
- Cleanup of Resets and Gpios
- Add platform library versioning to enhance support capabilities
- Allow supervisor to manage cards from slot 2
- Miscelanous cleanups and refactors
Signed-off-by: Samuel Angebault <staphylo@arista.com>
* 7260cx3 DualToR config.bcm support based on DualToR setting in device metadata at boot time.
For HWSKU Arista-7260CX3-C64 the MMU setting SOC for T0/T1 is also combined into the config.bcm.j2 logic so use just one config file and adding delta based on Switch Roles.
Integrate hw-management package V.7.0010.2002
Bug fixes:
Removing critical thermal zones to prevent unexpected software system shutdown:
*Kernel 4.9 -0071-mlxsw-core-Remove-critical-trip-point-from-thermal-z.patch
*Kernel 4.19 -076-mlxsw-core-Remove-critical-trip-point-from-thermal-z.patch
Removing redundant link for cpld3 for fixed systems (SN2100, SN2010).
Fix an issue with missed attribute for cpld3 (port CPLD) for SN2700, SN2410.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Build Marvell kernel driver for prestera sai sdk
Builds interrupt and dma kernel driver
Removed the older method pre-compiled kernel module debian package and its makefile
To add latest SAI drop REL_4.3.3.3 to SONIC which addresses the following CSP cases:
CS00012058054: [4.3][IPinIP][TTL-PIPE] IPinIP TTL Pipe Mode is NOT working it is behaving UNIFORM mode even programed as PIPE mode
CS00011227466: [4.3] Warmboot support with tunnel encap
Fix the following issues:
Spectrum-2, Spectrum-3 | Port | Fix link issue when using 25 GbE rate between two ports while one is on Spectrum-2-based system and the other is on Spectrum-3-based system
All | warmboot | fail to upgrade from earlier SONiC versions with official SDK/FW 4.4.2306 (was on SONiC 201911)
All | What-Just-Happened | When enabling or disabling WJH under high traffic load to the host CPU, in very specific and low probability conditions, an error could occur, that may result in loss of data, channel failure or in extreme cases SW failure
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
To improve management of docker-gbsyncd-vs. gbsyncd_startup.py simply spawned syncd processes and then exited. In that case, supervisord would no longer manage any processes in the container, and thus there was no way to know if a critical process had exited.
I recently created gbsyncdmgrd to be a more complete, robust replacement for gbsyncd_startup.py.
NOTE: This PR is dependent on the inclusion of gbsyncdmgrd in the sonic-sairedis repo. A submodule update is pending at
#7089
The psample module was not loaded on barefoot platform. The loading of this module is a prerequisite for testing SFlow.
* add `.gitignore` to the `barefoot` subdirectory to overwrite ignore "platform/**/debian/*" in the root directory
Initialize fans and thermals lists on demand; make them properties in order to reduce Chassis object initialization time
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
- Why I did it
The existing Fan led and Psu led object initialize itself to green color in init method. However, there are multiple daemons calls sonic platform API and there could be a case that:
A PSU is removed from system
Reboot switch
psud detects that 1 PSU is missing and set PSU led to red
Other daemon just start up and call sonic platform API, the API set PSU led to green by call PsuLed.init
This PR is a partial fix for the issue. As we also need guarantee that the led is initialized with a correct value. I checked existing psud and thermalctld code. psud always initialize the PSU led color on boot up, thermalcltd need some changes to initialize led color on the first run
- How I did it
Remove the led color initialization code from FanLed.init and PsuLed.init
- How to verify it
Manual test
Eliminate the need for `gbsyncd_start.sh`, which simply calls `exec "/usr/bin/gbsyncd_startup.py"`. The shell script is unnecessary.
Once this PR merges, we can remove `gbsyncd_start.sh` from the sonic-sairedis repo.
There was a change to replace platform utils with sonic platform API in psuutil. However, psu API is not initialized on host side. The PR is to fix it.
Use udevadm to trigger the udev rules on the first boot
How to verify:
- Connect C0 with E1031;
- Install or upgrade the sonic os to 202012 branch;
- When access to sonic check if /dev/C0-1 to /dev/C0-48 are existed.
- Why I did it
To pick up new features and fix from SDK/FW and SAI
SDK/FW new Feature:
All | Added support for multiple modules and cable types. For full list contact Nvidia networking support
Spectrum-3 | SN46000C | Added support for up to 5W on ports 49 to 64 .
SDK/FW bugs' fix:
All | fast reboot | fast boot failure from latest 201811 to 201911 and above
Spectrum | 10GbE/1GbE Transceiver (FTLX8574D3BCV) stopped working after firmware upgrade
Spectrum-2 | When device is rebooted with locked Optical Transceivers in split mode, the firmware may get stuck
Spectrum-2 | SN3700 | When connecting at 200GbE to Ixia K400, Ixia receives CRC errors
Spectrum-2 | SN3800 | On rare occasions packets loss may be experienced due to signal integrity issues
Spectrum-2 | When the port is a member of a LAG, after a warmboot and port toggle on the peer-side, the port remains down
Spectrum-3 | SN4700 | While using Optic cable in Split 4x1 mode in PAM4, when two first ports are toggled, the other 2 ports go down
Spectrum-3 | SN4700 | When working in 400GbE, deleting the headroom configuration (changing buffer size to zero) on the fly may cause continual packet drops
SAI
All | sFlow | Use hardcoded value 1 as netlink group number ax expected by hsflowd
- How I did it
Update the related version number in the make files and update the submodule pointer accordingly.
- How to verify it
Run regression test and everything works good.
#### Why I did it
- Python3 compatibility changes for PDDF eeprom class
- Adding API for temperature in PDDF psu class
- PEP8 standard changes and adding missing method in PDDF sfp class
#### How I did it
- Using python3 to invoke the sonic_platform module in PDDF based platform
- Running autopep8 tool to comply to PEP8 standards
#### Why I did it
Recently, CLI sfputil replace the old sonic platform utils with sonic platform API. However, sonic platform API does not support SFP low power mode and reset related operation. The PR is to fix it.
The change to replace platform utils with sonic platform API was reverted on 202012, once this PR is merged, we can cherry-pick these two PRs to 202012 together.
#### How I did it
In low power mode and reset related operation, use "docker exec" if the command is running on host side.
- Why I did it
Update MFT tool version to 4.16.0
Bugs fixes:
mlxlink: Fixed an issue that caused the margin scan to fail with the following message: Eye scan not completed.
mlxcable: Cable firmware burning capability is not supported.
New features:
mlxlink: Enabled margin scan on Network links.
mlxlink: Added PRBS TX/RX polarity inversion using the following flags: --invert_tx_polarity / --invert_rx_polarity
- How I did it
Update MFT make file with new version number.
- How to verify it
Build image and test related functions on Mellanox platform
Incorporate the below changes in DellEMC Z9332F platform:
- Implemented watchdog platform API support
- Implement ‘get_position_in_parent’, ‘is_replaceable’ methods for all device types
- Change return type of SFP methods to match specification in sonic_platform_common/sfp_base.py
- Added platform.json file in device directory.
Co-authored-by: V P Subramaniam <Subramaniam_Vellalap@dell.com>
- Why I did it
To collect platform based logs along with "show techsupport" on S6000 and S6100 plaforms.
- How I did it
On branch dell_techsupport_dump
Changes to be committed:
(use "git reset HEAD ..." to unstage)
new file: platform/broadcom/sonic-platform-modules-dell/common/actions.sh
modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6000.install
modified: platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install
new file: platform/broadcom/sonic-platform-modules-dell/s6000/scripts/hw-management-generate-dump.sh
new file: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/hw-management-generate-dump.sh
- How to verify it
hw-mgmt-dump.tar.gz will be found in sonic_dump__< YYYYMMDD_HHMMSS>.tar.gz.
#### Why I did it
- The xcvrd service requires an event detection function, unplug or plug in the transceiver.
#### How I did it
- Add sysfs interrupt to notify userspace app of external interrupt
- Implement get_change_event() in chassis api.
- Also begin installing Python 3 sonic-platform package for Celestica platforms
- Provide `hw-management-generate-dump.sh` for `show techsupport`
- Load `optoe3` for OSFP and QSFP-DD transceivers
- Enhance reboot-cause caching robustness
Signed-off-by: Samuel Angebault <staphylo@arista.com>
- Made python2 to python3 changes
- Removed ord() func as python3 return int instead of str
- Had to change chr(..) to bytes([..]) function while using ctypes class methods
- Why I did it
Bug fixes
- In rare cases when thermal algorithm is reactivated after FAN/PSU insertion, FAN remains at high rpm
- When stop hw-management code received error in the log instead of exit code '0'.
- In SPC1 i2c sometimes collide with chip reset coming from SDK
- Remove raw eeprom data link, when working with PSU which don't have eeprom for "msn274x", "msn24xx" and "msn27xx" systems
- Fix memory leak on mlxsw_core_bus_device module removal
- How I did it
Update the hw-mgmt version number in the make file
Update the hw-mgmt repo pointer
- How to verify it
run platform related test cases on all Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
To fix [DPB| wrong aliases for interfaces](https://github.com/Azure/sonic-buildimage/issues/6024) issue, implimented flexible alias support [design doc](https://github.com/Azure/SONiC/pull/749)
> [[dpb|config] Fix the validation logic of breakout mode](https://github.com/Azure/sonic-utilities/pull/1440) depends on this
#### How I did it
1. Removed `"alias_at_lanes"` from port-configuration file(i.e. platfrom.json)
2. Added dictionary to "breakout_modes" values. This defines the breakout modes available on the platform for this parent port, and it maps to the alias list. The alias list presents the alias names for individual ports in order under this breakout mode.
```
{
"interfaces": {
"Ethernet0": {
"index": "1,1,1,1",
"lanes": "0,1,2,3",
"breakout_modes": {
"1x100G[40G]": ["Eth1"],
"2x50G": ["Eth1/1", "Eth1/2"],
"4x25G[10G]": ["Eth1/1", "Eth1/2", "Eth1/3", "Eth1/4"],
"2x25G(2)+1x50G(2)": ["Eth1/1", "Eth1/2", "Eth1/3"],
"1x50G(2)+2x25G(2)": ["Eth1/1", "Eth1/2", "Eth1/3"]
}
}
}
```
#### How to verify it
`config interface breakout`
Signed-off-by: Sangita Maity <samaity@linkedin.com>
In preparation for the merging of Azure/sonic-platform-common#173, which properly defines class and instance members in the Platform API base classes.
It is proper object-oriented methodology to call the base class initializer, even if it is only the default initializer. This also future-proofs the potential addition of custom initializers in the base classes down the road.
In preparation for the merging of Azure/sonic-platform-common#173, which properly defines class and instance members in the Platform API base classes.
It is proper object-oriented methodology to call the base class initializer, even if it is only the default initializer. This also future-proofs the potential addition of custom initializers in the base classes down the road.
Modified the MRVL SAI debian version format to include debian revision number. This helps in identifying the SAI deb causing any build/runtime issue.
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
- Why I did it
System is stuck on 'starting' state on SimX platform because of infinite loop on 'hw-management-ready.sh' script .
The loop is polling to check if the hw-mgmt sysfs created before proceeding with the flow, for SimX platform the sysfs will never create so the system is not starting properly.
- How I did it
Add a condition to poll on hw-mgmt sysfs only if the switch is real HW and not SimX platform.
- How to verify it
Check "systemctl status hw-management.service" output on a SimX switch with this patch, the state will be "active".
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
- Why I did it
Add support for new 64x200G SN4600 systems
- How I did it
Add all relevant files (w/o platform.json and hwsku.json as they will come later) with default SKU.
- How to verify it
Install image on switch, verify all ports are up and configured properly, run full platform SONiC tests.
#### Why I did it
To incorporate the below changes in DellEMC S5232, Z9264, Z9332 platforms.
- Update thermal high threshold values
- Make watchdog API Python2 and Python3 compatible
- Fix LGTM alerts
- Z9264: Fix get_change_event timer value
#### How I did it
- Use 'universal_newlines=True' in subprocess.Popen call.
- Change the timeout in 'get_change_event' to milliseconds to match specification in sonic_platform_common/chassis_base.py
- Fix parent `__init__` call for platform API, based on Azure/sonic-platform-common#173
- Implementation for more platform API methods
- Daily storage information reporting in `arista daemon`
- Enhancements to reboot cause reporting, now multi-sourcing reboot cause information
- Miscellaneous fixes
The S6000 devices, the cold reboot is abrupt and it is likely to cause issues which will cause the device to land into EFI shell. Hence the platform reboot will happen after graceful unmount of all the filesystems as in S6100.
Moved the platform_reboot to platform_reboot_override and hooked it to the systemd shutdown services as in S6100
- Why I did it
Mellanox SDK APIs support python 2 at the moment.
- How I did it
Mellanox SDK APIs support python 2 at the moment.
- How to verify it
Add python 2 to Mellanox syncd only.
- Which release branch to backport (provide reason below if selected)
docker exec -t syncd /bin/bash -c "sx_api_dbg_generate_dump.py /home/sx_api_dbg_dump"
You can see that it will work and generate /home/sx_api_dbg_dump
Signed-off-by: allas <allas@nvidia.com>
- Improve sonic-mgmt platform test suite pass rate
- Improve coverage of platform unit tests
- Provide platform specific reboot logic as per platform porting guide
- Fix bug due to pcie.yaml file being located in the wrong directory
#### Why I did it
Fix runtime issues caused by SONiC update
#### How I did it
- new attribute SAI_ACL_ENTRY_ATTR_FIELD_ACL_IP_TYPE supported
- new attribute SAI_SWITCH_ATTR_AVAILABLE_IPMC_ENTRY supported
Signed-off-by: Roman Savchuk <romanx.savchuk@intel.com>
- Why I did it
The pcie configuration file location is under plugin directory not under platform directory.
#6437
- How I did it
Move all pcie.yaml configuration file from plugin to platform directory.
Remove unnecessary timer to start pcie-check.service
Move pcie-check.service to sonic-host-services
- How to verify it
Verify on the device
- Add support for `DCS-7050SX3-48YC8` and `DCS-7050SX3-48C8` platform
- Add support for more variants of `DCS-7280CR3-32[PD]4`
- Add Supervisor to Linecard consutil support
- Complete Watchdog platform API support
- Fix some PSU behavior on `DCS-7050QX-32` and `DCS-7060CX-32S`
- Fix SEU management on `DCS-7060CX-32S`
- Allow kernel modules to build up to linux 5.10
- Rename led color `orange` to `amber`
- Miscellaneous fixes
Open ACL Outer VLAN ID for egress for ports part of VLAN RIF
- Why I did it
Open ACL Outer VLAN ID for egress for ports part of VLAN RIF
- How I did it
Updated SAI submodule pointer
- How to verify it
Build an image, deploy and check all is up and running.
Verify ACL sonic-mgmt test is passing
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
To have the following fixes:
* All | Port status remains down after warm boot and flapping the port on peer side
* All | LAG HASH | IPv6 SRC_IP is not accounted in LAG hashing [
* All | ASIC driver | Kernel crash observed when driver reload is initiated before it fully loaded
* Spectrum-3 | Buffer | In lossless configuration, headroom is been evicted only when the shared buffers is free
* All | prevent FW access during ISSU
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Azure/sonic-utilities#1431 changes the path to the udevprefix.conf file. The file previously inappropriately resided in the <platform>/plugins/ directory. That directory is reserved for now-deprecated Python platform plugins, and will be removed in the near future.
This PR is needed to fix the show interface counters output issue where the counters are not correct due to an issue introduced in BRCM SAI 4.3.
- How to verify it
Without the fix if one injects packets, the expected counters for the interfaces involved do not show correct count values. The RX count looks to be TX count while TX count looks to be RX count but even that the values could not be trusted.
After the fix the counters started to look correct. Here is one sample output taken after the fix is applied where I manually injected 10,000 packets into Ethernet92 to be routed out of the port channel member port Ethernet40. Also injected 10,000 invalid packets into the same Ethernet92 and all 10,000 packets were shown RX_DRP correctly.
- Why I did it
Enable platform API tests to run successfully by providing required test infrastructure files along with supporting changes.
- How I did it
Added platform.json along with supporting changes.
- Addition of pcie.yaml supporting pcied
- Addition of Real fan drawer support vs Virtual
- Removal of python2 wheel with support in place for python3
- supporting changes platform api tests
platform modules' deb package rules for x86_64-accton_wedge100bf_65x-r0 was missing the code that installs the sonic_platform wheel package file under device directory on host (which is checked by pmon deamon on start)
Merged bcmsai 4.3.0.13 code to top of master bcmsai 4.3.0.10-5.
- How to verify it
Ran nightly regression on T0 and T1 topology using bcmsai 4.3.0.13. Test results are better than previous runs.
For T0 -
New test passing - CRM, Decap, FDB, platform test, VxLAN
New test failing – PFC unknown MAC
For T1 –
New test passing – Port Channel
New test failing – platform test
Include SAI bug fixes:
- Apply device MAC on port host interface when port is removed from LAG.
- [Shared Headroom]: fixed watermark handling for SHP flow
- Decrease verbosity of policer unbind message when no policer is attached
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
This PR is to fix issue: #6603
The CP210x driver not attached properly after first login (cold-plug), lsusb and dmesg shown that the usb devices has been recognized but driver is missing.
Submodule commits included:
* src/sonic-platform-common 6ad0004...bd4dc03 (1):
> [sonic_sfp/qsfp_dd.py] Update DOM capability method name to align with other drivers (#163)
Also align all calling function names to match.
When Building syncd-rpc, libthrift has dependency on libboost-atomic1.71.0,
however the debian packager install version 1.67 instead. This PR
preinstalls libboost-atomic v 1.71 to avoid falling back to v 1.67.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
- Why I did it
To move ‘sonic-host-service’ which is currently built as a separate package to ‘sonic-host-services' package.
- How I did it
- Moved 'sonic-host-server' to 'src/sonic-host-services' and included it as part of the python3 wheel.
- Other files were moved to 'src/sonic-host-services-data' and included as part of the deb package.
- Changed build option ‘INCLUDE_HOST_SERVICE’ to ‘ENABLE_HOST_SERVICE_ON_START’ for enabling sonic-hostservice at boot-up by default.
ACL entry set attribute updates all the entries in the table. The correct behavior is to set the attribute on single entry.
- How I did it
Current SDK code, while setting the new attribute, is going through all the entries and updating it. Added a logic to check for requested entry and only allow for that ACL entry.
A case has filed with BRCM. Once an official fix is provided by BRCM, we will then remove this in house fix and apply the official fix.
Fix#6711
the requirement was introduced in commit 75104bb35d
to support sflow in stretch build. in buster build, the requirement
is met, no need to pin down the version.
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
After migrating to python3, the operator '/' always get a float result, but it gets integer result in python2. Need fix this in thermal_conditions.
**- How I did it**
1. cast float value to int
2. change the unit test case to cover this situation
**- How to verify it**
Manually test and regression test
Accton util applies lsmod to check if drivers are installed.
But lsmod may return error on startup and skip module installation.
Signed-off-by: roy_lee <roy_lee@edge-core.com>
prerm is needed for platform modules package to be properly removed.
Added prerm to remove installed in postinst wheel packages.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
**- Why I did it**
PR https://github.com/Azure/sonic-platform-common/pull/102 modified the name of the SFF-8436 (QSFP) method to align the method name between all drivers, renaming it from `parse_qsfp_dom_capability` to `parse_dom_capability`. Once the submodule was updated, the callers using the old nomenclature broke. This PR updates all callers to use the new naming convention.
**- How I did it**
Update the name of the function globally for all calls into the SFF-8436 driver.
Note that the QSFP-DD driver still uses the old nomenclature and should be modified similarly. I will open a PR to handle this separately.
