- Run pre-commit tox profile to trim all trailing blanks
- Use several commits with a per-folder based strategy
to ease their merge
Issue #15114
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
- run pre-commit tox profile to trim all trailing blanks
- use several commits with a per-folder based strategy
to ease their merge
Issue #15114
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
- Why I did it
The current implementation of SFP reset, LPM, present relies on SDK API. This PR moves the implementation to SDK sysfs. By this PR, it gains following benefit:
1. SDK sysfs provides better performance.
2. Host side and container side share the same code.
3. Code is much cleaner.
- How I did it
Use SDK sysfs to implement SFP reset, LPM, present.
- How to verify it
1. Manual test.
2. Unit test.
SDK/FW Fixed Issues:
• When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work.
• When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value
• After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
• Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set
• If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail.
• In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed
• When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources
• When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck
• SN2201 Module 1 is considered to be present/linked while no cable/module is plugged
• On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes
SAI New features:
• ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets.
• PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event.
• Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario.
• Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario.
SAI Fixed issues:
• When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it
• When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
libsaithriftv2 build fails and nobody is maintaining saiserverv2's build.
Remove them from official build.
Work item tracking
Microsoft ADO (number only): 23764652
How I did it
How to verify it
This script was using 'null' as default value for all optional fields
of REST_SERVER table -- due to incorrect use of 'jq -r' command.
Server was not coming up when REST_SERVER entry exists but some fields
were not given (which is a valid configuration).
Fixed the jq query expression to return empty string for non existing
fields.
Signed-off-by: Sachin Holla <sachin.holla@broadcom.com>
Why I did it
We need to store information of power shelf in config_db for SONiC MX switch. Current minigraph parser cannot parse rack_mgmt_map field.
Work item tracking
Microsoft ADO (number only): 22179645
How I did it
Add support for parsing rack_mgmt_map.
What I did:
Updated Static Route Attribute in Minigraph. NGS Minigraph has define semantics of static route differently.
See below for differences:-
Microsoft ADO: 17956325
Before
<AssociatedTo>8.0.0.1/32</AssociatedTo>
<Address>192.168.1.2,192.168.2.2</Address>
<AttachTo>PortChannel40,PortChannel50</AttachTo>
Now:
<Address>8.0.0.1</Address>
<AttachTo>PortChannel40,192.168.1.2;PortChannel50,192.168.2.2</AttachTo>
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Update PG headroom settings ports based on port speed/cable length
* Updated XOFF settings to use chip level numbers than core
* Updated PG headroom based on uplink/downlink side
* fix for sonic-config-gen tests
* More fixes for unit test cases
* more test fixes
* Merged multiple functions into one
Add new Nokia build target and establish an arm64 build:
Platform: arm64-nokia_ixs7215_52xb-r0
HwSKU: Nokia-7215-A1
ASIC: marvell
Port Config: 48x1G + 4x10G
How I did it
- Change make files for saiserver and syncd to use Bulleseye kernel
- Change Marvell SAI version to 1.11.0-1
- Add Prestera make files to build kernel, Flattened Device Tree blob and ramdisk for arm64 platforms
- Provide device and platform related files for new platform support (arm64-nokia_ixs7215_52xb-r0).
Some devices running SONiC have a small storage device (2G and 4G mainly)
The SONiC image growth over time has made it impossible to install
2 images on a single device.
Some mitigations have been implemented in the past for some devices but
there is a need to do more.
One such mitigation is `docker_inram` which creates a `tmpfs` and
extracts `dockerfs.tar.gz` in it.
This all happens in the SONiC initramfs and by ensuring the installation
process does not extract `dockerfs.tar.gz` on the flash but keep the file as is.
This mitigation does a tradeoff by using more RAM to reduce the disk footprint.
It however creates new issues for devices with 4G of system memory since
the extracted `dockerfs.tar.gz` nears the 1.6G.
Considering debian upgrades (with dual base images) and the continuous
stream of features this is only going to get bigger.
This change introduces an alternative to the `tmpfs` by allowing a system
to extract the `dockerfs.tar.gz` inside a `zram` device thus bringing
compression in play at the detriment of performance.
Introduce 2 new optional kernel parameters to be consumed by SONiC initramfs.
- `docker_inram_size` which represent the max physical size of the
`zram` or `tmpfs` volume (defaults to DOCKER_RAMFS_SIZE)
- `docker_inram_algo` which is the method to use to extract the
`dockerfs.tar.gz` (defaults to `tmpfs`)
other values are considered to be compression algorithm for `zram`
(e.g `zstd`, `zlo-rle`, `lz4`)
Refactored the logic to mount the docker fs in the SONiC initramfs under
the `union-mount` script.
Moved the code into a function to make it cleaner and separated the
inram volume creation and docker extraction.
On Arista platform with a flash smaller or equal to 4GB set
`docker_inram_algo` to `zstd` which produces the best compression ratio
at the detriment of a slower write performance and a similar read
performance to other `zram` compression algorithms.
Enable docker_inram for all systems with 4GB or less of flash.
This is mandatory to allow these systems to store 2 SONiC images.
This change also fixes the missing docker_inram attribute when
installing a new image from SONiC.
Because the SWI image can ship with additional kernel parameters within
such as `sonic_fips=` this lead to a conflict.
To prevent the conflict, the extra kernel parameters from the SWI are
now stored in the file `kernel-cmdline-append` which isn't used anywhere.
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds S3IP supported sysfs attribute in common FAN driver of PDDF.
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds the S3IP supported sysfs attributes in PDDF common LED driver.
Why I did it
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds support for pddf-s3ip-init.service and enables it in PDDF.
Why I did it
For security and consistency consideration, change the docker image from alpine to Debian in Makefile
Work item tracking
Microsoft ADO (number only): 23077660
How I did it
change the docker image from alpine to Debian in Makefile
Following changes are done:
Added Support where if asic configuration is not present in minigraph sonic-cfggen do not error out but instead process it gracefully.
Use Case: In Supervisor we have number of asic are define as max possible but in minigraph configuration of only valid/available asics only are present. Without this change load_minigraph fails.
Microsoft ADO: 17956325
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
Our k8s feature will pull new version container images for each upgrade, the container images inside sonic will be more and more, but for now we don’t have a way to clean up the old version container images, the disk may be filled up. Need to add cleaning up the old version container images logic.
Work item tracking
Microsoft ADO (number only):
17979809
How I did it
Remove the old version container images besides the feature's current version and last version image, last version image is saved for supporting fallback.
How to verify it
Check whether the old version images are removed
Why I did it
Run kvmtest when update package versions to avoid test break.
Work item tracking
Microsoft ADO (number only): 22335854
How I did it
How to verify it
Why I did it
ptf_nn_agent failed to start in dnx rpc syncd because module afpacket was not installed.
Please see issue sonic-net/sonic-mgmt#7822
How I did it
Add downloading ptf afpacket module in docker file.
How to verify it
Verified that ptf_nn_agent was started successfully in dnx rpc syncd with the change.
* To resolve NEIGH table entries present in CONFIG_DB. Without this change arp/ndp entries which we wish to resolve, and configured via CONFIG_DB are not resolved.
Why I did it
Don't auto update package version for release branch.
Work item tracking
Microsoft ADO (number only): 22335854
How I did it
How to verify it
- SAI-1.11.0 support
- SONIC 20220531.25 OC Failure: Everflow testcases failing due to SAI orchagent crash
- SONIC 20220531.25 OC Failure: ACL IPv6 testcases.
- TPID support
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
Why I did it
Provide a method to override build options in webUI.
We can stop python dependency upgrade version.
Work item tracking
Microsoft ADO (number only): 22335854
How I did it
Add a variable at the tail of make command.
Why I did it
When auto cherry pick workflow create PR, fill the body field.
Rerun Azure.sonic-buildimage on failure perday.
Work item tracking
Microsoft ADO (number only): 17979778
How I did it
How to verify it
- Why I did it
Since the prod signing tool is vendor specific, and each vendor may have different arguments they would like to use in the script, we would need a way to inject those arguments to the script.
- How I did it
Add a compilation flag SECURE_UPGRADE_PROD_TOOL_ARGS which vendors can use to inject any flag they would want to the prod signing script.
- How to verify it
Build SONiC using your own prod script
- Why I did it
As a LED indicator to help user to find switch location in the lab, UID LED is a useful LED in Mellanox switch.
- How I did it
I add a new member _led_uid in Mellanox/Chassis.py, and extend Mellanox/led.py to support blue color.
Relevant platform-common PR sonic-net/sonic-platform-common#369
- How to verify it
Add unit test cases in test.py, and do manual test including turn-on/off/show uid led.
Signed-off-by: David Xia <daxia@nvidia.com>
Fix lpmode on 7060DX5-32
Fix psu led issue on 7060DX5-64
Use sonic_xcvr lpmode if platform does not support hw lpmode
Add chassis cooling algorithm
Change cooling algorithm default interval to 10s
Force filesystem sync on linecard reboot
