#### Why I did it
src/sonic-linux-kernel
```
* e262947 - (HEAD -> 202305, origin/202305) Revert "Update to Linux 5.10.179 (#328)" (19 hours ago) [stormliang]
* e64669d - Update to Linux 5.10.179 (#328) (2 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* df4d49f - (HEAD -> 202305, origin/202305) Install necessary debs instead of entire artifact in azp (#137) (12 hours ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 8934b62b - (HEAD -> 202305, origin/202305) [202305][CodeQL]: Use dependencies with relevant versions in azp template. (#2906) (3 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 0584d35b - (HEAD -> 202305, origin/202305) Revert "Support type7 encoded CAK key for macsec in config_db (#2892)" (3 minutes ago) [stormliang]
* 7097cf2b - Revert "[teamd]: Clean teamd process if LAG creation fails (#2888)" (3 days ago) [stormliang]
* a0eb0d07 - Support type7 encoded CAK key for macsec in config_db (#2892) (4 days ago) [judyjoseph]
* c7e5f10e - [teamd]: Clean teamd process if LAG creation fails (#2888) (4 days ago) [Lawrence Lee]
* f30b6107 - [CodeQL]: Use dependencies with relevant versions in azp template. (#2845) (4 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.
Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
* Change the CAK key length check in config plugin, macsec test profile changes
* Fix the format in add_profile api
The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.
Co-authored-by: judyjoseph <53951155+judyjoseph@users.noreply.github.com>
How I did it
Update Yang definition of ACL_TABLE_TYPE.
Update existing testcase.
Add new testcase to cover lowercase key scenario.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
#### Why I did it
src/sonic-linux-kernel
```
* 9cb7ea0 - (HEAD -> 202305, origin/202305) arm64: dts: marvell: Add Nokia 7215-IXS-A1 board (#321) (24 hours ago) [Pavan-Nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Advance dhcpmon to a3c5381 in 202305 branch.
a3c5381 - (HEAD, origin/master, origin/HEAD, master) Merge pull request src: Add libnl3 build.sh script #11 from jcaiMR/dev/jcai_fix_err_log (11 days ago) [StormLiangMS]
c5ef7e7 - Change common_libs dependencies from buster to bullseye (Updating docker-orchagent/syncd Dockerfile and start.sh #9)
824a144 - replace atoi with strtol (Rename hostname #6) (10 weeks ago) [Mai Bui]
32c0c3f - Fix libswsscommon package installation for non-amd64 (README.md leaves out docker-database #7) (10 weeks ago) [Saikrishna Arcot]
Work item tracking
Microsoft ADO (25048723):
How I did it
How to verify it
Run test_dhcp_relay.py, no failure
- Why I did it
Fixed build failure when flag ENABLE_SFLOW_DROPMON=y set
- How I did it
Fixed sflow dropmon patch to align with hsflowd version 2.0.45
Signed-off-by: rajkumar38 <rpennadamram@marvell.com>
Bmc is a valid neighbor type in minigraph, however it was missing from the YANG model definition. Usually, the Bmc type device can be neighbor of BmcMgmtToRRouter. This PR is to introduce this type.
Why I did it
According to ACL-Table-Type-HLD, the value type of MATCHES, ACTIONS and BIND_POINTS should be list instead of string. Opening this PR to update the definition of BMCDATA and BMCDATAV6.
How I did it
Update the definition of BMCDATA and BMCDATAV6 in minigraph-parser.
How to verify it
Verified by UT and build SONiC image.
#### Why I did it
src/sonic-swss
```
* c869c1df - (HEAD -> 202305, origin/202305) update portStatIds for cisco (#2876) (11 minutes ago) [Zhixin Zhu]
* dd152288 - [Dynamic Buffer][Mellanox] Skip PGs in pending deleting set while checking accumulative headroom of a port (#2871) (12 minutes ago) [Stephen Sun]
* 97068ff1 - Fix error in peer response time when headroom is calculated for 800G (#2860) (16 minutes ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Few commands in multiasic platforms when run with the "sudo ip netns exec asic0 " option was taking like 15 mins to get the o/p. This behavior of sudo getting hung was seen by just doing this
jujoseph@svcstr-server-2:~ sudo ip netns exec asic0 bash
jujoseph@svcstr-server-2:~ sudo ls
deally sudo is not needed as we have /bin/ip netns identify present in /etc/sudoers file. Hence removing it
Why I did it
Support FIPS DB configuration
Design Doc: sonic-net/SONiC#1372
Work item tracking
Microsoft ADO (number only): 24411148
How I did it
Add the FIPS Yang model to make FIPS configurable in ConfigDB.
How to verify it
See TestPlan: sonic-net/sonic-mgmt#9092
Build the image and run the tests: sonic-net/sonic-mgmt#9091
How I did it
Update Yang definition of IN_PORTS and OUT_PORTS to string.
Since we cannot split the string with comma (,) and validate each substring is a valid SONiC port name. The only restriction for them is must be a string.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Build a SONiC image based on 202205 branch and installed on physical DUT. Re try the steps in [Yang] Incorrect definition of IN_PORTS and OUT_PORTS in sonic-acl.yang #16190 and can see below success response:
#### Why I did it
src/linkmgrd
```
* 40113fd - (HEAD -> 202305, origin/202305) [active-standby] Fix extra toggle observed in `config reload` (#216) (2 days ago) [Longxiang Lyu]
* b6d40fc - Add ADO to the PR template (#215) (2 days ago) [Longxiang Lyu]
* fe41ad2 - [active-standby] Write `unhealthy` is default route `N/A` (#214) (2 days ago) [Longxiang Lyu]
* 8ff265c - [link prober] Increase pause/restart probe log verbosity (#213) (2 days ago) [Longxiang Lyu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* 4688e1e - (HEAD -> 202305, origin/202305) [PSU power threshold] Fix logic error: compare the system power with the PSU's power threshold (#367) (2 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 6b0c8c5c - (HEAD -> 202305, origin/202305) [muxorch] set mux state to init upon warm reboot (#2834) (18 hours ago) [Nikola Dancejic]
* bc9bde94 - [ASAN] Fix Indirect Mem Leaks in Orchagent (#2869) (24 hours ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
fix static route uninstall issue when all nexthops are not reachable.
the feature was working but the bug was introduced when support dynamic bfd enable/disable. Added UT testcase to guard this.
- Why I did it
Adjust PSU power threshold logic in system health.
- How I did it
Update the description message in PSU power threshold checking
power of PSU x (xx w) exceeds threshold (xx w) => System power exceeds xx threshold (xx w)
- How to verify it
Manual test and unit test
