#### Why I did it
If the grouping is in the same file in the module, fetching the grouping fails
#### How I did it
fixing the `uses_module_name` when the grouping is under the same file
#### How to verify it
Enabled a grouping under the same file which is `lldp`, there is a test in sonic-yang-mgmt that translates `sample-config-db` into yang format. This test passes with grouping in `lldp` used.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Include sonic-bgp-monitor to setup.py so it gets included in /usr/local/yang-models when installing the package
#### How I did it
#### How to verify it
install the package
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Enable dbgsym package for dhcpmon.
Allow CFLAGS and LDFLAGS from environment variables to be used
in the dhcp6relay build. This makes sure that the -O2 flag from
dpkg-buildflags gets used.
Finally, enable all hardening flags in dpkg-buildflags for
dhcp6relay and dhcpmon. The change from the default set of flags is that
during linking, immediate binding of symbols is done instead of lazy
binding.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### How I did it
Added mclag sonic yang file for the MCLAG enhancements as per HLD: Azure/SONiC#596
#### How to verify it
try rest APIs
#### Description for the changelog
Added mclag sonic yang
- Why I did it
For SYSTEM READY feature. Currently, there is a booting stage in system health service to indicate that the system is loading SONiC component. This booting stage is no longer needed because SYSTEM READY feature will treat that stage as system "NOT READY".
- How I did it
1. Remove booting stage
2. Adjust unit test cases
- How to verify it
Manual test, Unit test, sonic-mgmt Regression
Why I did it
the strcpy and buffer allocation is not safe, it corrupts 1 byte on the stack. Depending on the memory layout, it may or may not cause issue immediately.
message type is not validated before updating the counter. Which could cause segment fault.
How I did it
Remove the unsafe strcpy, use config->interface.c_str() instead.
Check message type before updating counters.
How to verify it
The issue (1) caused segment fault on a specific platform. The fix was validated there. Issue (2) was precautionary. Added log in case it triggers.
Why I did it
Minigraph parser added a new field 'cluster' to device_metadata, and then yang validation is blocked.
How I did it
Add 'cluster' to device_metadata yang models.
How to verify it
Run UT for sonc-yang-models.
Use minigraph parser to generate ConfigDB schema and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
* [y_cable] Support for initialization of new Daemon ycable to support
ycables
This PR also adds the commit in sonic-platform-daemons
94fa239 [y_cable] refactor y_cable to a seperate logic and new daemon from xcvrd (#219)
Why I did it
This PR separates the logic of Y-Cable from xcvrd. Before this change we were utilizing xcvrd daemon to control all aspects of Y-Cable right from initialization to processing requests from other entities like orch,linkmgr.
Now we would have another daemon ycabled which will serve this purpose.
Logically everything still remains the same from the perspective of other daemons.
it also take care aspects like init/delete daemon from Y-Cable perspective.
How I did it
To serve the purpose we build a new wheel sonic_ycabled-1.0-py3-none-any.whl and install it inside pmon.
We also initalize the daemon ycabled which serves our purpose for refactor inside pmon
How to verify it
Ran the changes with an image for dualtor tests on a 7050cx3 platform
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Update the sonic-swss submodule. The following are new commits in the submodule:
6cb43ee [p4orch] Fix handlePortStatusChangeNotification status deserialize (#2111)
863f0f1 [azp]: Enable PR diff coverage (#2083)
bf4cd4a Fix the unsafe usage of strncpy in portsorch.cpp (#2110)
c1b4b40 support port isolation group in BFN platform (#1940)
Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com>
#### Why I did it
src\tacacs\bash_tacplus\debian\rules file mode is 644, and debian build will change it to 755, which will cause image version contains 'dirty'
#### How I did it
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### How to verify it
Check the image version not contains dirty
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [*] 202111
#### Description for the changelog
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
ACL have ACCEPT action indeed, but yang doesn't support it.
How I did it
Add 'ACCEPT' enum to sonic-types.yang.j2
How to verify it
Run the YANG model unit tests
Why I did it
ConfigDB schema generated by minigraph parser can't pass yang validation.
How I did it
Modify minigraph.py, and use 'state' to replace 'status'.
How to verify it
Run UT for sonic-config-engine.
Use minigraph parser to generate ConfigDB schema, and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
end2end test is blocked by Yang model for BGP monitor.
How I did it
Create new yang files for BGP monitor, and add UT.
How to verify it
Follow the steps in #9711.
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
c4127c2 [psud] Fix PSU log issue (#235)
07542cb [pmon][xcvrd]xcvrd process show backtrace on the internal port. (#233)
3e432e7 [Y-Cable] Increased unit test coverage of y_cable_helper.py (#229)
7c363f5 [ledd] prevent led crash on recirc port event (#232)
e9ccd82 [sonic-platform-daemons] fix dependency issue on py2 wheels by correcting the path (#234)
2b0acfb [sfp-refactoring] xcvrd: add initial support for CMIS application initialization (#217)
```
d9f3afe [fdbshow] Adding more options for fdbshow and show mac (#1982)
902e14f Revert "Revert "[Barefoot] Added CLI to list/set P4 profile (#1951)"" (#2019)
5cc9dd5 Revert "Revert "[sonic-package-manager] support sonic-cli-gen and packages with YANG model (#1650)" (#1972)" (#1994)
```
As part of this, update the isc-dhcp package to match the Bullseye
version (this fixes some compile errors related to BIND), clean up some
of the build dependencies and runtime dependencies for debian packaging,
and use the default Boost version to compile against instead of
explicitly saying using 1.74.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
[Submodule update] sonic-swss
c78aa1b81a3a9001669746067ebbe40b4485f71d (HEAD -> master, origin/master, origin/HEAD) OA changes to support Ordered ECMP and DVS test for same. (#2092)
b4b00031378a6ce303b779159e718d6d20790c11 Handling Invalid CRM configuration gracefully (#2109)
d240cb2d356ec17baa464455f37f88ac5dbc441a [Mellanox] '_8lane' not added to Mellanox 5xxx models with 800G (#2090)
8fd6e488d2a3696b9cfe352a9119c86f0f33e6dc [pfcwd] Add vs test infrastructure (#2077)
b96ee5438b8bf08980846ee84ff69e7ba267b0dc [vnetorch] Advertise vnet tunnel routes (#2058)
[submodule update] sonic-sairedis
d5866a3dccfb3bc50853d740d54203b5cae61eed (HEAD -> master, origin/master, origin/HEAD) [vslib]: fix create MACsec SA error (#986)
f36f7ce6236ae97526e15f00e7688ccced7c0454 Added Support for enum query capability of Nexthop Group Type. (#989)
323b89b14995a84bd6539c8a1df00b77d251f99e Support for MACsec statistics (#892)
26a8a1204e873109537c81462ad1457cf38c2f9e Prevent other notification event storms to keep enqueue unchecked and drained all memory that leads to crashing the switch router (#968)
0cb253a42cd0a641b8e0a3c6a4a54e5397dd8c2d Fix object availability conversion (#974)
457e94d51 [macsec_linux]: Fixbug cannot dump the PN due to type error (#42)
f7c073323 Disable P2P module (#41)
7b3b777e2 [ci]: use native arm64 and armhf build pool (#40)
d4e91d66c [sonic_operator]: Increase wait timeout (#39)
43611ef88e [sonic_operators]: Add log in sonic operators (#43)
Signed-off-by: Ze Gan <ganze718@gmail.com>
What I did:-
Enhanced minigraph parser to parse interface name associated with static route nexthop
Why I did:-
One of the use case to support interface name is Chassis Packet. For Chassis Packet we have Static Routes configured to route traffic across line-card. If the FRR programs static route without the interface name then in case if the ip interface that is associated with the nexthop goes down FRR resolves static route nexthop over the default route as we have FRR config ip nht-resolve-via-default which causes undesired behavior. Having interface name with Static Route prevents recursive lookup on default route.
How I verify:
Updated unit-test cases
Manual verification
#### Why I did it
AAA yang model is not up to date.
#### How I did it
Add fallback and trace field, and replace boolean_type
#### How to verify it
Run UT for sonic_yang_models.
Follow the steps from #9710
Why I did it
Config db schema generated by minigraph can’t pass yang validation, bgp_asn must not be None.
How I did it
Update sampe-voq-graph.xml to add bgp_asn.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m tests/sample-voq-graph.xml -p tests/voq-sample-port-config.ini --print-data', and check bgp_asn.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Update the sonic-swss submodule. The following are new commits in the submodule.
6dae6b8 Add initial value for weight in overlay nexthops (#2096)
d3cd402 [p4rt-tests] Bind response consumer to appl_state_db (#2105)
43e54e5 Fix armhf buildimage artifacts not found issue (#2107)
How I did it
Update the swss submodule pointer.
Provide the changes required for supporting the "show-techsupport" command via the SONiC Management Framework front end mechanisms (CLI, REST, and gNOI). The Management Framework functionality implemented by this PR improves on the the capabilities currently provided by the SONiC Click CLI interface via the "show techsupport" command by providing the following additional features:
- User-friendly "help" information describing command syntax details for CLI invocation.
- Ability to invoke the command via REST and gNOI mechanisms.
Unit test results are attached to this PR.
Fixes#9561Fixes#9570Fixes#9563
Partial fix for #9556
#### Why I did it
- Attributes for dual ToR configs lack YANG model support
#### How I did it
- Extend YANG tests to cover dual ToR use cases
- Extend YANG model to cover dual ToR use cases
- Reduce the default log level to warning so only test failures are printed
#### How to verify it
- Run the YANG model unit tests
Why I did it
Add YANG model file for table VLAN_SUB_INTERFACE
How I did it
Add YANG model file sonic-vlan-sub-interface.yang to describe data structure
modify existing unit-test to cover vlan sub interface
How to verify it
Build sonic-yang-models and sonic-yang-mgmt without errors
#### Why I did it
It should be handled by `ConfigDBConnector.typed_to_raw()`.
This is a bug for `sonic-cfggen -m --print-data` only
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {
"NULL": "NULL"
},
"PortChannel0002|Ethernet116": {
"NULL": "NULL"
},
"PortChannel0003|Ethernet120": {
"NULL": "NULL"
},
"PortChannel0004|Ethernet124": {
"NULL": "NULL"
}
},
```
But not appears in `sonic-cfgen -d --print-data`.
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {},
"PortChannel0002|Ethernet116": {},
"PortChannel0003|Ethernet120": {},
"PortChannel0004|Ethernet124": {}
},
```
Tested in a T0 KVM.
On a multi-asic Supervisor card, running commands like
'show interface counter' opens a confid_db connection per
namespace per interface which results in many duplicate connections
exceeding the allowed open file handles. This causes the command to fail.
Caching the connections to prevent duplicate handles.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, portchannel_member has invalid port.
How I did it
Update test minigraph to remove invalid port channel.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check port channel member.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, and there's no 'alias' field in yang model.
Minigraph parser supports 'alias' field for VLAN.
How I did it
Add 'alias' field to sonic-vlan.yang
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m xxx.xml --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, there's no Vlan31 in 'VLAN' table.
How I did it
Update test minigraph to add vlan interface.
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m tests/fg-ecmp-sample-minigraph.xml -p tests/mellanox-sample-port-config.ini --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/1871
From [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) we call `sonic-yang-mgmt` multiple times in order to check a certain change to ConfigDb is valid or not. It is expected for some changes to be invalid, so always printing errors from `sonic-yang-mgmt` makes the output hard to read.
In this PR, we are adding a way to control if logs should be printed or not.
#### How I did it
- Added `print_log_enabled` flag to sonic_yang ctor
- Converted all `print` statements to `sysLog(..., doPrint=True)`
#### How to verify it
unit-test passing means the change did not break logs.
#### Info about libyang logging
libyang provides an extensive logging logic which can support a lot of scenarios:
- ly_log_level: setting logging level
- LY_LLERR
- LY_LLWRN
- ...
- ly_set_log_clb: setting log callback to customize the default behavior which is printing the msgs
- ly_log_options: setting logging options
- LY_LOLOG: If callback is set use it, otherwise just print. If flag is not set, do nothing.
- ...
For more info refer to:
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__logopts.html#gaff80501597ed76344a679be2b90a1d0a
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__log.html#gac88b78694dfe9efe0450a69603f7eceb
#### What's next?
Consume the new flag `print_log_enabled` in [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) to reduce the logging clutter.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Updating ztp submodule to include the below commits
f7dd3c5 [sonic-ztp]Fixing build failure after bullseye integration (#30)
9218e16 Replace swsssdk.ConfigDBConnector and SonicV2Connector with swsscommon(#28)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
691c37b7 [Route bulk] Fix bugs in case a SET operation follows a DEL operation in the same bulk (Azure/sonic-swss#2086)
a4c80c3d patch for issue Azure/sonic-swss#1971 - enable Rx Drop handling for cisco-8000 (Azure/sonic-swss#2041)
71751d10 [macsec] Support setting IPG by gearbox_config.json (Azure/sonic-swss#2051)
5d5c1692 [bulk mode] Fix bulk conflict when in case there are both remove and set operations (Azure/sonic-swss#2071)
8bbdbd2b Fix SRV6 NHOP CRM object type (Azure/sonic-swss#2072)
ef5b35f3 [vstest] VS test failure fix after fabric port orch PR merge (Azure/sonic-swss#1811)
89ea5385 Supply the missing ingress/egress port profile list in document (Azure/sonic-swss#2064)
81234373 [pfc_detect] fix RedisReply errors (Azure/sonic-swss#2040)
b38f527a [swss][CRM][MPLS] MPLS CRM Nexthop - switch back to using SAI OBJECT rather than SWITCH OBJECT
ae061e55 create debug_shell_enable config to enable debug shell (Azure/sonic-swss#2060)
45e446d9 [cbf] Fix max FC value (Azure/sonic-swss#2049)
b1b5b297 Initial p4orch pytest code. (Azure/sonic-swss#2054)
d352d5a9 Update default route status to state DB (Azure/sonic-swss#2009)
24a64d65 Orchagent: Integrate P4Orch (Azure/sonic-swss#2029)
15a3b6ca Delete the IPv6 link-local Neighbor when ipv6 link-local mode is disabled (Azure/sonic-swss#1897)
ed783e1f [orchagent] Add trap flow counter support (Azure/sonic-swss#1951)
e9b05a31 [vnetorch] ECMP for vnet tunnel routes with endpoint health monitor (Azure/sonic-swss#1955)
bcb7d61a P4Orch: inital add of source (Azure/sonic-swss#1997)
f6f6f867 [mclaglink] fix acl out ports (Azure/sonic-swss#2026)
fd887bf8 [Reclaim buffer] Reclaim unused buffer for dynamic buffer model (Azure/sonic-swss#1910)
92589789 [orchagent, cfgmgr] Add response publisher and state recording (Azure/sonic-swss#1992)
3d862a72 Fixing subport vs test script for subport under VNET (Azure/sonic-swss#2048)
fb0a5fd8 Don't handle buffer pool watermark during warm reboot reconciling (Azure/sonic-swss#1987)
16d4bcdb Routed subinterface enhancements (Azure/sonic-swss#1907)
9639db78 [vstest/subintf] Add vs test to validate sub interface ingress to a vnet (Azure/sonic-swss#1642)
Signed-off-by: Stephen Sun stephens@nvidia.com
- Why I did it
The feature state can be a jinja template, like in this file - https://github.com/Azure/sonic-buildimage/blob/master/files/build_templates/init_cfg.json.j2#L39.
Without this change it is not possible to validate a configuration file.
- How I did it
Relaxes the constraint on feature state. Feature state leaf can be any string.
- How to verify it
Run UT.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
'SYSLOG_SERVER': {'': {}, '10.0.10.5': {}, '10.0.10.6': {}},
Config db schema generated by minigraph can’t pass yang validation, server address can't be empty.
How I did it
Update test minigraph to remove wrong configuration.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and SYSLOG_SERVERS table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update test minigraph to fix interface
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check interface table and port table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update minigraph xml to add DeploymentId.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check deployment_id field.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
POLL_INTERVAL cannot be set if any of the detection/restoration times in this table is less than the POLL_INTERVAL.
#### How I did it
Add "must" constraint to make sure detection/restoration times are greater than POLL_INTERVAL.
#### How to verify it
Use apply-patch command to update POLL_INTERVAL.
Build sonic-yang-model.
Closes#7958
#### Why I did it
The previous implementation of sonic-cfggen did a simple comparison between default breakout mode in
hwsku.json and supported modes in platform.json. To set a different default speed in hwsku.json
it was required to add one more entry to supported modes in platfrom.json file:
1x10G[100G,50G] vs 1x100G[50G,10G]
The new implementation does more intelligent parsing and analysis of supported and default modes. It
allows changing default speed without adding a new entry to platform.json.
#### How I did it
Add more intelligent parsing and analysis of supported and default modes.
#### How to verify it
Run sonic-config-engine unit tests from sonic-config-engine/tests directory
#### Why I did it
Sonic yang model for BUM storm control
#### How I did it
Added yang model and the corresponding test cases.
#### How to verify it
yang model test case for storm control
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
1. Fix auditd log file path, because known issue: https://github.com/Azure/sonic-buildimage/issues/9548
2. When SONiC change to based on bullseye, auditd version upgrade from 2.8.4 to 3.0.2, and in auditd 3.0.2 the plugin file path changed to /etc/audit/plugins.d, however the upstream auditisp-tacplus project not follow-up this change, it still install plugin config file to /etc/audit/audisp.d. so the plugin can't be launch correctly, the code change in src/tacacs/audisp/patches/0001-Porting-to-sonic.patch fix this issue.
#### How I did it
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### How to verify it
Pass all UT, also run per-command acccounting UT to validate plugin loaded.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Fix issue https://github.com/Azure/sonic-utilities/issues/1962
The problem is current implementation of [sonic-yang-mgmt::find_data_dependencies](f2774b635d/src/sonic-yang-mgmt/sonic_yang.py (L518)) does not get referrers if they are using `must` statement, it has to use `leafref`.
For now we can convert `must` to `leafref` if possible. In the future we will investigate get referrers by `must` statements as well https://github.com/Azure/sonic-buildimage/issues/9534
#### How I did it
Instead of `must` use `leafref`
#### How to verify it
unit-test
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
[LLDPD] fix to port remove and immediately create a problem - on delete link events it will immediately execute delete without using aggregate events mechanism.
This patch was added to LLDPD on this PR:
lldpd/lldpd#492
Signed-off-by: tomeri <tomeri@nvidia.com>
What I did:
Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter.
Why I did:-
By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
This interface type is used for recirculation on chassis.
The definition is required to prevent this interface from being
considered a physical interface in sonic-platform-common and
sonic-platform-daemon
Fixes#9326
#### Why I did it
When we try execute DPB from CLI we have error:
`libyang[0]: Invalid value "False" in "has_global_scope" element. (path: /sonic-feature:sonic-feature/FEATURE/FEATURE_LIST[name='bgp']/has_global_scope)`
The reason for this issue is that has_global_scope and other have been stored in redis database with value False or True form capital letter:
```
"FEATURE":{
"bgp":{
"auto_restart":"enabled",
"has_global_scope":"False",
"has_per_asic_scope":"True",
"has_timer":"False",
"high_mem_alert":"disabled",
"state":"enabled"
}
```
But yang model support boolean just in lowercase letters (https://datatracker.ietf.org/doc/html/rfc6020#section-9.5.1).
#### How I did it
Added boolean to sonic-types as typedef with different literal cases.
#### How to verify it
Run the command config interface breakout <breakout_mode>
**NOTE:**
To verify this fix, the following PRs that fix other problems in SONiC must be merged into master:
1) Azure/sonic-buildimage/pull/9075
2) Azure/sonic-buildimage/pull/9276
Signed-off-by: Neetha John <nejo@microsoft.com>
Bring back the changes in #9226 that were reverted. Unable to do a revert-revert.
Why I did it
Few device types were missing in the DEVICE_METADATA type field
How I did it
Added missing device types to the device metadata yang
#### Why I did it
Fixing issue #9294
#### How I did it
Updating ACL yang model
#### How to verify it
Validating issue with `config patch-apply` is fixed.
- Start a KVM
- Add file `add-ctrl-plane-tbl.json-patch ` with content:
```json
[
{
"op": "add",
"path": "/ACL_TABLE/ACTRLPLANETABLE",
"value": {
"policy_desc": "ACTRLPLANETABLE",
"services": [
"SSH"
],
"stage": "ingress",
"type": "CTRLPLANE"
}
}
]
```
- Run `sudo config apply-patch add-ctrl-plane-tbl.json-patch`
Before:
```
Patch Applier: The patch was sorted into 4 changes:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"type": "CTRLPLANE"}}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/policy_desc", "value": "ACTRLPLANETABLE"}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/services", "value": ["SSH"]}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/stage", "value": "ingress"}]
```
After:
```
Patch Applier: The patch was sorted into 1 change:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"policy_desc": "ACTRLPLANETABLE", "services": ["SSH"], "stage": "ingress", "type": "CTRLPLANE"}}]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Add the configuration for the set_owner in the `feature` yang model
#### How I did it
Add new leaf `set_pwner` to the `feature` yang model
#### How to verify it
compile `sonic_yang_mgmt-1.0-py3-none-any.whl`
#### Why I did it
Currently only IP ACL and related model is defined. Support for MAC ACL is missing. Added support for it.
#### How I did it
ACL_RULE table is added with new MAC ACL related fields namely Source MAC, Destination MAC, Ethertype (Pattern updated to match any valid Ethertypes), VLAN, PCP, DEI
#### How to verify it
Yang model tests are attached.
Why I did it
Add YANG model support for table CABLE_LENGTH
How I did it
Add the YANG model file
Add the test description file and config file
add list CABLE_LENGTH_LIST to the qos_maps_model list in sonic-yang-ext, as it has an inner list.
How to verify it
Build sonic-yang-model and sonic-yang-mgmt
- Why I did it
Fix sonic-config-engine unit test failure
- How I did it
* Do not use pytest fixture in the test since it is not compatible with unittest framework which is used by all of the rest test cases.
* Supply 2 missing files
- How to verify it
Run unit test or compile the module (when the unit test will run automatically)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
#9122
DEVICE_METADATA does not have cloudtype and region.
How I did it
Add cloudtype and region to DEVICE_METADATA.
How to verify it
Follow the steps in #9122.
Build sonic-yang-model.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### What I did
[sonic-linkmgrd][master] submodule update
6c6151b Fix unstable unit tests (state change handler wasn't invoked) (#8)
2f7dc0a support code diff coverage (#5)
83f0002 Force mux state switch to standby if triggered from Cli (#6)
signed-off-by: Jing Zhang zhangjing@microsoft.com
#### Why I did it
DPB falls due to missing POLL_INTERVAL in sonic-flex_counter yang model.
#### How I did it
Added POLL_INTERVAL leaf to ACL container in sonic-flex_counter yang model.
#### How to verify it
Run the command config interface breakout <interface> <breakout_mode>
**NOTE:**
To verify this fix, a PR ([add set_owner to feature yang](https://github.com/Azure/sonic-buildimage/pull/9075)) that fix another bug in SONiC should be merged to master.
Why I did it
Add yang model for syslog server
How I did it
Add new file sonic-syslog.yang and new files for tests
How to verify it
Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
- Add INCLUDE_PINS to config to enable/disable container
- Add Docker files and supporting resources
- Add sonic-pins submodule and associated make files
Submission containing materials of a third party:
Copyright Google LLC; Licensed under Apache 2.0
#### Why I did it
Adds P4RT container to SONiC for PINS
The P4RT app is covered by this HLD:
https://github.com/pins/SONiC/blob/master/doc/pins/p4rt_app_hld.md
#### How I did it
Followed the pattern and templates used for other SONiC applications
#### How to verify it
Build SONiC with INCLUDE_P4RT set to "y".
Verify that the resulting build has a container called "p4rt" running.
You can verify that the service is up by running the following command on the SONiC switch:
```bash
sudo netstat -lpnt | grep p4rt
```
You should see the service listening on TCP port 9559.
#### Which release branch to backport (provide reason below if selected)
None
#### Description for the changelog
Build P4RT container for PINS
Updated BGP Template for the case:
1. For Packet Chassis do not advertise Loopback4096 address into BGP as there is Static Route for same.
Having this route in BGP causes two level of recursion in Zebra and cause assert in Zebra
when there are many nexthop involved
2. Advertise only P2P Connected IP's into BGP (External Peers). For Packet chassis we have backend IP Interface subnet and if
they get advertised into BGP then it also causes recursion
Fix the nodesource.list cannot read issue, it is cased by the full path not used.
```
2021-12-03T06:59:26.0019306Z Removing intermediate container 77cfe980cd36
2021-12-03T06:59:26.0020872Z ---> 528fd40e60f6
2021-12-03T06:59:26.0021457Z Step 81/81 : RUN post_run_buildinfo
2021-12-03T06:59:26.0841136Z ---> Running in d804bd7e1b06
2021-12-03T06:59:29.1626594Z [91mDEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 is no longer maintained. pip 21.0 will drop support for Python 2.7 in January 2021. More details about Python 2 support in pip can be found at https://pip.pypa.io/en/latest/development/release-process/#python-2-support pip 21.0 will remove support for this functionality.
2021-12-03T06:59:34.2960105Z [0m[91m/usr/bin/sed: can't read nodesource.list: No such file or directory
2021-12-03T06:59:34.5094880Z [0mThe command '/bin/sh -c post_run_buildinfo' returned a non-zero code: 2
```
Co-authored-by: Ubuntu <xumia@xumia-vm1.jqzc3g5pdlluxln0vevsg3s20h.xx.internal.cloudapp.net>
c2aac75 [SFP-Refactor] Fix LP mode API issue (#247)
dba17c8 Firmware upgrade CLI support for QSFP-DD transceivers (#244)
cd69212 [SFP-Refactor] Implement CMIS Low Power mode (#237)
9cea07f Fix RegGroupField decode (#245)
6ae1909 Add CMIS QSFP support (#246)
c1f317d Gracefully handle CMIS APIs for passive modules (#238)
ec7335d fix for firmware functions (#243)
cf2ebe9 Fix RegBitField decode/encode (#242)
ef4f2c6 Fix SFP_CABLE_TECH_FIELD (#240)
e118644 remove time counting message in functions because function running time could be difficult to predict in unit tests (#241)
Signed-off-by: Prince George <prgeor@microsoft.com>
#### Why I did it
Created SONiC Yang model for Mirror.
Tables: MIRROR_SESSION
#### How I did it
Defined Yang models for COPP based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md
#### How to verify it
'''
============================= test session starts ==============================
platform linux -- Python 3.7.3, pytest-3.10.1, py-1.7.0, pluggy-0.8.0
rootdir: /sonic/src/sonic-yang-models, inifile:
plugins: cov-2.6.0
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py . [100%]
=============================== warnings summary ===============================
module: sonic-mirror-session
+--rw sonic-mirror-session
+--rw MIRROR_SESSION
+--rw MIRROR_SESSION_LIST* [name]
+--rw name string
+--rw type? string
+--rw src_ip? inet:ipv4-address
+--rw dst_ip? inet:ipv4-address
+--rw gre_type? string
+--rw dscp? uint8
+--rw ttl? uint8
+--rw queue? uint8
+--rw dst_port? -> /port:sonic-port/PORT/PORT_LIST/name
+--rw src_port? union
+--rw direction? string
'''
Bring in the following commit:
405f1df Use build profiles instead of distro version for Python 2 binding build (#558)
This change requires a corresponding change in this repo to set a build
profile to not build the python 2 bindings on Bullseye.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This pull request integrate audisp-tacplus to SONiC for per-command accounting.
#### Why I did it
To support TACACS per-command accounting, we integrate audisp-tacplus project to sonic.
#### How I did it
1. Add auditd service to SONiC
2. Port and patch audisp-tacplus to SONiC
#### How to verify it
UT with CUnit to cover all new code in usersecret-filter.c
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add audisp-tacplus for per-command accounting.
#### A picture of a cute animal (not mandatory but encouraged)
The BGP_VOQ_CHASSIS_NEIGHBOR keepalive and holdtime timers are
configured similar to general neighbors. Changes are done to configure
BGP_VOQ_CHASSIS_NEIGHBOR timers similar to BGP_INTENAL_NEIGBOR since voq
chassis bgp neighbors are similar to bgp internal neighbors in
multi-asic. As it is done for bgp internal neighbors, the keepalive and
holdtime timers are set to 3 and 10 seconds respectively. Also similar
to bgp internal neighbors, connection retry timer is also configured for
voq chassis bgp neighbors.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
Why I did it
Add bgpcfgd support to advertise routes.
How I did it
Make bgpcfgd subscribe to the ADVERTISE_NETWORK table in STATE_DB and configure route advertisement accordingly.
How to verify it
Added unit tests in bgpcfgd and verify on KVM about route advertisement.
* Routed subinterfae enhancements HLD #833
* Adding python API support to get routed subinterface long name to get correct parent interface for the routed subinterface.
Signed-off-by: Stephen Sun stephens@nvidia.com
Why I did it
Support zero buffer profiles
Add buffer profiles and pool definition for zero buffer profiles
Support applying zero profiles on INACTIVE PORTS
Enable dynamic buffer manager to load zero pools and profiles from a JSON file
Dependency: It depends on Azure/sonic-swss#1910 and submodule advancing PR once the former merged.
How I did it
Add buffer profiles and pool definition for zero buffer profiles
If the buffer model is static:
Apply normal buffer profiles to admin-up ports
Apply zero buffer profiles to admin-down ports
If the buffer model is dynamic:
Apply normal buffer profiles to all ports
buffer manager will take care when a port is shut down
Update buffers_config.j2 to support INACTIVE PORTS by extending the existing macros to generate the various buffer objects, including PGs, queues, ingress/egress profile lists
Originally, all the macros to generate the above buffer objects took active ports only as an argument
Now that buffer items need to be generated on inactive ports as well, an extra argument representing the inactive ports need to be added
To be backward compatible, a new series of macros are introduced to take both active and inactive ports as arguments
The original version (with active ports only) will be checked first. If it is not defined, then the extended version will be called
Only vendors who support zero profiles need to change their buffer templates
Enable buffer manager to load zero pools and profiles from a JSON file:
The JSON file is provided on a per-platform basis
It is copied from platform/<vendor> folder to /usr/share/sonic/temlates folder in compiling time and rendered when the swss container is being created.
To make code clean and reduce redundant code, extract common macros from buffer_defaults_t{0,1}.j2 of all SKUs to two common files:
One in Mellanox-SN2700-D48C8 for single ingress pool mode
The other in ACS-MSN2700 for double ingress pool mode
Those files of all other SKUs will be symbol link to the above files
Update sonic-cfggen test accordingly:
Adjust example output file of JSON template for unit test
Add unit test in for Mellanox's new buffer templates.
How to verify it
Regression test.
Unit test in sonic-cfggen
Run regression test and manually test.
* Add macsec-xpn-support iproute2 in syncd
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Polish code
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Remove useless files
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Add self-compiled iproute2 to docker sonic vs
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Enhance apt install for iproute2 dependencies
Signed-off-by: Ze Gan <ganze718@gmail.com>
Why I did it
resolves#8979 and #9055
How I did it
Remove the file static.conf.j2,which adds the default route on eth0 from bgp docker
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
a0bff26a [acl-loader] modify acl-loader with change in STATE DB ACL capability table (#1896)
a395e284 [debug dump util] Changes for EVPN and VxLAN dump module (#1892)
02a98ef1 [debug dump util] Route Module added (#1913)
ac8382fd [generic-config-updater] Logging change just before applying it (#1934)
9ab6c515 [flex counter] Flex counter threads consume too much CPU resources. #9202 (#1925)
2ec47a59 [generic-config-updater] Handling empty tables while sorting a patch (#1923)
fdedcbf6 [fdbshow]: Handle FDB cleanup gracefully. (#1926)
e7535ae3 [sonic-cli-gen] first phase implementation of the SONiC CLI Auto-generation tool (#1644)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
What I did:
Added option 'advertise':'true'/'false' to STATIC_TALE to control whether given route need to be advertise into BGP.
How I did:
Add a route in FRR with tag (1 for advertise and 2 for not advertise)
Create Route Map to match on tag as 1 and permit
Attach route-map to redistribute static.
Minigraph option to parse advertise option of Static Route.
bb0733aa [aclorch] Add ACL_TABLE_TYPE configuration (#1982)
59cab5d9 Support for setting switch level DSCP to TC QoS map (#2023)
da21172e [aclorch] add generic AclOrch::updateAclRule() method (#1993)
4f6cb055 [Reclaiming buffer] Support reclaiming buffer in traditional model (#2011)
32d7a69e [Reclaiming buffer] Common code update (#1996)
b91d8ba7 [swss] L2 Forwarding Enhancements (#1716)
797dab41 [muxorch] Bind all ports to drop ACL table (#2027)
99929cd7 [lgtm.yml] add libgmock-dev (#2035)
8727ae5c [flex counter] Flex counter threads consume too much CPU resources #9202 (#2031)
103fdf05 Remove redundant calls to get child scheduler group during initialization (#1965)
18ea8404 [macsec]: MACsec statistics support (#1867)
0c462420 [orchagent] Flush pipeline every 1 second, not only when select will timeout (#2003)
339101cf [cbf] Add class-based forwarding support (#1963)
24a615bd Fix issue: accumulative headroom can exceed limit in rare scenario (#2020)
708e232a Test divide by zero processing path (#2028)
8f1d035c [macsecmgr]: Wait for port up before enabling macsec (#2032)
4912a770 Remove buffer drop counter when port is removed (#1860)
f9462c49 [Dynamic buffer] [Mellanox] Calculate the peer response time according to the speed (#1930)
8b5a401e Routed subinterface enhancements (#2017)
cdea5e9b Fix next hop compilation (#2025)
37c197d0 [SRV6] Sonic-swss changes for SRV6 (#1964)
f502c320 [vnetorch] Add ECMP support for vnet tunnel routes (#1960)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
HLD updated here: https://github.com/Azure/SONiC/pull/887
#### Why I did it
Command `monit summary -B` can no longer display the status for each critical process, system-health should not depend on it and need find a way to monitor the status of critical processes. The PR is to address that. monit is still used by system-health to do file system check as well as customize check.
#### How I did it
1. Get container names from FEATURE table
2. For each container, collect critical process names from file critical_processes
3. Use “docker exec -it <container_name> bash -c ‘supervisorctl status’” to get processes status inside container, parse the output and check if any critical processes exit
#### How to verify it
1. Add unit test case to cover it
2. Adjust sonic-mgmt cases to cover it
3. Manual test
* [yang_models]: Update extension yang and types yang with new yang extensions and types respectively.
* [YANG] Added CVL specific type and moved sonic-types to j2 template.
* [sonic-acl] add ACL_TABLE_TYPE table
I implemented ACL table type concept. Till this change, there are predefined ACL table types orchagent knows about (L3, L3V6, etc.) and if other orch requires a custom table a new table type needs to be defined in aclorch.
This PR addresses this limitation by introducing AclTableType which can be constructed from a set of matches, actions and bpoint types user needs. There is also a new handler for ACL_TABLE_TYPE table which is used for user to define table types.
Currently, some of built-in ACL table types that requires special handling are distinguished from others by their names (TABLE_TYPE_MIRROR, TABLE_TYPE_MIRRORV6) and a special handling is performed by an AclOrch.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
When we update the a sai package downing from a remote server, we need to update the version file as well currently, but the reproducible build feature is not enabled in master, it can only be detected when merging the code into the release branches, such as 202106, 202012, etc.
The reproducible feature is to reduce the build failure, not need to break the build when the version not specified. If version not specified, the best choice is to accept the version from remote server.
Co-authored-by: Ubuntu <xumia@xumia-vm1.jqzc3g5pdlluxln0vevsg3s20h.xx.internal.cloudapp.net>
a3e34e30 [Auto Techsupport] Event driven Techsupport Changes (#1796)
efa2ff62 [show][platform summary] Add chassis type in the platform summary output(#1922)
a39350c6 [aclshow] enhance ACL counters to work with FC infrastructure (#1858)
ed880131 [sonic-package-manager] fix registry requests failing when no service field in Bearer fields (#1921)
00b60455 [VS test] Increase test timeout (#1924)
Previously the Yang model unit tests pulled directly from the Yang model source code for their models. This worked up to a point where we had jinja templates which needed to be rendered before they could be tested on. Now we need to reference the install location of the rendered templates for the unit tests.
Additionally, PBH yang was never added to the list of models to install onto a switch so I have resolved that (another example why pulling directly from the source was not correct)
My best explanation for why we only saw this failing on mellanox was that these tests could not have possibly been running on the broadcom build (I have not investigated this specifically). There was no way for these tests to pass recently given they were referencing Yang models which did not exist in the source (ACL).
Signed-off-by: pettershao-ragilenetworks pettershao@ragilenetworks.com
What I did it
Add new platform x86_64-ragile_ra-b6510-32c-r0 (Trident 3)
ASIC Vendor: Broadcom
Switch ASIC: Trident 3
Port Config: 32x100G
Add new platform x86_64-ragile_ra-b6920-4s-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 128x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
c8eceec 400zr initial support (#228)
ef55364 SSD Health: Retrieve SSD health and temperature values from generic SSD info (#229)
26c8346 Fix cmis cable length issue (#225)
671927d Fix typo in the simulated y_cable driver (#226)
51a9aca [sfp-refactor] Add initial support for CMIS in sonic_xcvr (#220)
Signed-off-by: Prince George <prgeor@microsoft.com>
#### Why I did it
Changes required for feature "Event Driven TechSupport Invocation & CoreDump Mgmt". [HLD](https://github.com/Azure/SONiC/pull/818 )
Requires: https://github.com/Azure/sonic-utilities/pull/1796.
Merging in any order would be fine.
Summary of the changes:
- Added the YANG Models for the new tables introduces as a part of this feature.
- Enhanced init_cfg.json with the default config required
- Added a compile Time flag which enables/disables the config required for this feature inside the init_cfg.json
- Enhanced the supervisor-proc-exit-listener script to populate `<feature>:<critical_proc> = <comm>:<pid>` info in the STATE_DB when it observes an proc exit notification for the critical processes running inside the docker.
6f1a0ea (HEAD, origin/master, origin/HEAD, master) [FlexCounter] Add support for ACL counters (#953)
67b3136 [vslib] fill aclcapability.is_action_list_mandatory field (#957)
eba6a1b [ci]: use native armhf and arm64 pool (#965)
04793b1 [az] Set diff coverage threshold to 50% (#963)
6092d50 [syncd] Add workaround for warm boot new objects (#960)
88b62ce Added Flex Counters support for tunnel counters (#886)
a718226 [Counters] Query Counters Stats Capabilities (#952)
This commit fixes/avoids the following errors encountered during the
marvell-armhf build for bullseye
- Fix Marvell prestera DMA driver build failure due to kallsyms_lookup_name()
no longer being exported by the updated bullseye kernel. This is a temporary
fix that will be replaced by a future version of the DMA driver.
- Update qemu-user-static version to align with the new glibc version included
in bullseye
- Skip systemd-sonic-generator unit tests to avoid test failures. Root cause is
still TBD
#### Why I did it
Fix the following build errors observed when building marvell-armhf for bullseye
1. Marvell Prestera DMA driver uses kernel API no longer exported
ERROR: modpost: "kallsyms_lookup_name" [/sonic/platform/marvell-armhf/prestera/mrvl-prestera/cpssEnabler/linuxNoKernelModule/drivers//mvDmaDrv.ko] undefined!
2. Old qemu-user-static version does not support semop() leading to following build failure
semop(1): encountered an error: Function not implemented
3. systemd-sonic-generator unit test failure
ssg-test.cc:217: Failure
Expected equality of these values:
find_string_in_file(str_t, target, num_asics)
Which is: false
expected_result
Which is: true
Error validating Before=single_inst.service in test.service
[ FAILED ] SsgMainTest.ssg_main_40_npu (20 ms)
[----------] 4 tests from SsgMainTest (36 ms total)
[----------] Global test environment tear-down
[==========] 10 tests from 3 test suites ran. (54 ms total)
[ PASSED ] 7 tests.
[ FAILED ] 3 tests, listed below:
[ FAILED ] SsgMainTest.ssg_main_single_npu
[ FAILED ] SsgMainTest.ssg_main_10_npu
[ FAILED ] SsgMainTest.ssg_main_40_npu
3 FAILED TESTS
This pull request add a bash plugin for TACACS+ per-command authorization
#### Why I did it
1. To support TACACS per command authorization, we check user command before execute it.
2. Fix libtacsupport.so can't parse tacplus_nss.conf correctly issue:
Support debug=on setting.
Support put server address and secret in same row.
3. Fix the parse_config_file method not reset server list before parse config file issue.
#### How I did it
The bash plugin will be called before every user command, and check user command with remote TACACS+ server for per-command authorization.
#### How to verify it
UT with CUnit cover all code in this plugin.
Also pass all current UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Bash TACACS+ plugin.
#### A picture of a cute animal (not mandatory but encouraged)
Fix support for DHCPV6 Relay multi vlan functionality. Make sure the relayed packet is received at correct interface.
How I did it
Bind a socket to each vlan interface's global and link-local address.
Socket binded to global address is used for relaying data from client to server and receiving data from servers.
Socket binded to link-local address is used for relaying data received from server back to the client.
When sshd realizes that this login can't succeed due to internal device state
or configuration, instead of failing right there, it proceeds to prompt for
password, so as the user does not get any clue on where is the failure point.
Yet to ensure that this login does not proceed, sshd replaces user provided password
with a specific pattern of characters matching length of user provided password.
This pattern is "INCORRECT", which is bound to fail.
If user provided length is smaller/equal, the substring of pattern is overwritten.
If user provided length is greater, the pattern is repeated until length is exhausted.
But if the PAM-tacacs plugin would send this password to AAA, the user could get
locked out by AAA, for providing incorrect value.
How I did it
Hence this fix, matches obtained password against the pattern. If match, fail just before
reaching AAA server.
Why I did it
To add ACL FC to the YANG model.
How I did it
Added to the YANG model and added a UT.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
* [ACL] enable ACL FC when genereting config from minigraph but disable by default
Why I did it
To support ACL counters on Flex Counter Infrastructure.
How I did it
Enable ACL FC in init_cfg and minigraph. Disable when genereting configuration from preset.
How to verify it
Together with depends PRs. Run ACL/Everflow test suite.
Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
In the build in Bullseye, there are no png files available in the
specified installation source directory. For now, don't bother
installing those files.
This may end up being reverted later if there are indeed png files that
need to be installed for documentation.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Debian actually did a binNMU for snmpd, so to match the package version
we're building with the version in the offiical repos, that version
needs to be manually specified in the changelog.
Buster still needs 5.7.3, because there's a ABI change between 5.7.3 and
5.9 for libsnmp, so for Buster, make sure that 5.7.3 is built, and for
Bullseye, make sure that 5.9 is built.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Remove Python 2 package installation from the base image. For container
builds, reference Python 2 packages only if we're not building for
Bullseye.
For libyang, don't build Python 2 bindings at all, since they don't seem
to be used.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Include validation of chassis dict in platform.json unit test
Based on: Azure/SONiC#768
How I did it
Update platform_json_checker to validate fields in chassis dict.
How to verify it
Verified that the unit test reports success for correct values of existing and capabilities fields in platform.json
Why I did it
Added Buffer yang files derived from sonic/mgmt-cvl/testdata/schema from sonic-mgmt-common, used by mgmt-framework.
Updated BUFFER_PG|({ifname},)*|{pg_num} to BUFFER_PG|{ifname}|{pg_num} in sonic-buffer-pg.yang.
This change is required for configuration migration for dynamic port breakout operation.
Added sonic-buffer-queue.yang for BUFFER_QUEUE
Tables: BUFFER_POOL, BUFFER_PROFILE, BUFFER_PG, BUFFER_QUEUE.
How I did it
Defined Yang models for BUFFER tables based on Guideline doc:
https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md
and
https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md
How to verify it
sonic_yang_models package build.
Description for the changelog
MMU Buffer yang files (BUFFER_POOL/BUFFER_PROFILE/BUFFER_PG/BUFFER_QUEUE)
Updating sonic-utilities sub module with the following commits
63a5257 [TACACS+] Add config command for AAA authorization and accounting. (#1889)
8a8577b [dump] [copp] Fixed the NameError Exception for copp dump module (#1911)
84be8b4 Dump media_settings from appDB during fast-reboot (#1910)
563c416 Allow interface type value none (#1902)
095bf54 generic_updater: Fix service validator related issues (#1901)
efbe1f4 [chassis][supervisor][show][interfaces]show interfaces command warning on Supervisor card (#1771)
487b3b7 Add CRM CLIs for SRV6 nexthop and my_sid_entry (#1883)
52b7a47 (HEAD, origin/master, origin/HEAD) [schema]: MACsec statistics support (#520)
48d7d8a [ci]: use native arm64 and armhf pool to build (#552)
Signed-off-by: Ze Gan <ganze718@gmail.com>
This PR allow user to set none value to interface type. So there is a way to achieve the goal via CLI:
config interface type XXX none
config interface speed XXX 10000
config interface type XXX CR
Including the below commits to update swss submodule
8448a60 [vs tests]Migrating sonic-swss tests to use hwsku instead of fakeplatform (#1978)
faa26db Fix random failure in PR/CI build. (#2006)
e03edb6 Allow interface type value none (#1991)
71b9650 [orchagent] Fix group name of port-buffer-drop in flexcounterorch.cpp (#1967)
facdef5 [VS test] Skip flaky virtual chassis test (#2004)
8261c1f [pytest]: Increase timeout when checking services (#2000)
67278be [teammgrd]: Handle LAGs cleanup gracefully on Warm/Fast reboot. (#1934)
e92c1df Enable FEC statistics collection for Ethernet ports (#1994)
9f30ca1 VxLAN Tunnel Counters and Rates implementation (#1859)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
[TACACS+] Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting. (#9029)
#### Why I did it
Support TACACS per-command authorization&accounting.
#### How I did it
Change ConfigDB schema and HostCfg enforcer.
Add UT to cover changed code.
#### How to verify it
Build following project and pass all UTs:
make target/python-wheels/sonic_host_services-1.0-py3-none-any.whl
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Add Config DB schema and HostCfg Enforcer plugin to support TACACS+ per-command authorization&accounting.
#### A picture of a cute animal (not mandatory but encouraged)
Added get_system_mac support for cisco-8000 device
Why I did it
This is required to assign unique MACs to namespaces on Backend and Frontend asics
for cisco-8000 platforms
How I did it
Add vendor specific hook in get_system_mac. The MAC address are read from /profile.ini
file
How to verify it
config load_minigraph on a multi-asic system
config save
check mac addresses in DEVICE_METADATA section in each config_db json file
The submodule update includes the following commits
ac3103a Add missing neighbor resolution for MPLS route programming (#1968)
bfba0ad [vlanmgr]Fix for STATE_DB port check logic (#1980)
9ef2ba4 Update VLAN removal code to work with 5.10 kernel and new
41fb26c Handle setting unknown mux state (#1984)
ac09bde Increase timeout for VS tests (#1988)
da8a43e Check if appl DB exists before deleting (#1983)
553d75a Change tunnel orch order (#1977)
7444e96 Add rekey period in macsec mgr (#1958)
d95823d [Buffermgr]Graceful handling of buffer model change (#1956)
b0aa6a0 EVPN VxLAN enhancement to support P2MP tunnel based programming for L
85bdf54 Fix the option missing in kernel config issue (#1973)
6b15584 Orchagent validates mirror session queue parameter against maximum va
fc9ffb9 [copp] Add ISIS, LDP and micro-BFD trap types to CoPP manager (#1890)
452cbc1 [macsecorch]: Add IPG adjusting for MACsec gearbox model (#1925)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
What I did:
Fix the typo in Internal Peer Group template for Packet-based Chassis.
Address Review comments of PR: [chassis-packet] minigraph parsing and BGP template changes #8966
- Static Route Parsing for Host
- Formatting of chassis port_config.ini
#### Why I did it
Includes below commits
```
c2d4945 2021-09-17 | [snmp] Allow system with no ports in config db run without errors (#221) [Lior Avramov]
fccb21b 2021-08-30 | [RFC1213]: Initialize lag oid map in reinit_data instead of (#232) [SuvarnaMeenakshi]
```
#### Why I did it
Fixes https://github.com/Azure/sonic-buildimage/issues/8619
#### How I did it
1) Listening to CFG_DB notifications was migrated from ConfigDBConnector to SubscriberStateTable & Select
2) This change in design helped me to remove `update_all_features_config` which was roughly taking a 5-10 sec time to execute and thus the reason for blackout
3) Edited FeatureHandler, Feature & NtpCfgd classes to suit this design
4) Added corresponding mocks and UT's
**Changes made to classes other than HostConfigDaemon:**
With the previous design, the initially read data from the config db was applied by using hardcoded methods even before the config_db.listen() was called. For Eg: `update_all_features_config` for FeatureHandler and load() named methods for NtpCfgd etc
But with this design, since the existing data is read and given out as a notification by SubscriberStateTable, i've pretty much removed these hardcoded methods. Thus changes made to these class will be around adapting them to the new design and no change in the actual functionality .
#### How to verify it
UT's:
```
tests/determine-reboot-cause_test.py ......... [ 29%]
tests/procdockerstatsd_test.py . [ 32%]
tests/caclmgrd/caclmgrd_dhcp_test.py ...... [ 51%]
tests/hostcfgd/hostcfgd_radius_test.py .. [ 58%]
tests/hostcfgd/hostcfgd_test.py ............. [100%]
```
Verified manually,
```
Sep 10 22:53:25.662621 sonic INFO systemd[1]: hostcfgd.service: Succeeded.
Sep 10 22:55:04.127719 sonic INFO /hostcfgd: ConfigDB connect success
Sep 10 22:55:04.128108 sonic INFO /hostcfgd: KdumpCfg init ...
Sep 10 22:55:04.148819 sonic INFO /hostcfgd: Waiting for systemctl to finish initialization
Sep 10 22:55:04.163452 sonic INFO /hostcfgd: systemctl has finished initialization -- proceeding ...
Sep 10 22:55:04.163834 sonic INFO /hostcfgd: Kdump handler...
Sep 10 22:55:04.164019 sonic INFO /hostcfgd: Kdump global configuration update
Sep 10 22:55:04.758784 sonic INFO hostcfgd[184471]: kdump is already disabled
Sep 10 22:55:04.758876 sonic INFO hostcfgd[184471]: Kdump is already disabled
Sep 10 22:55:05.182021 sonic INFO hostcfgd[184511]: Kdump configuration has been updated in the startup configuration
Sep 10 22:55:05.596919 sonic INFO hostcfgd[184528]: Kdump configuration has been updated in the startup configuration
Sep 10 22:55:06.140627 sonic INFO /hostcfgd: Feature nat is stopped and disabled
Sep 10 22:55:06.642629 sonic INFO /hostcfgd: Feature telemetry is enabled and started
Sep 10 22:55:07.101297 sonic INFO /hostcfgd: Feature pmon is enabled and started
Sep 10 22:55:07.554366 sonic INFO /hostcfgd: Feature database is enabled and started
Sep 10 22:55:08.009329 sonic INFO /hostcfgd: Feature mgmt-framework is enabled and started
Sep 10 22:55:08.394952 sonic INFO /hostcfgd: Feature macsec is stopped and disabled
Sep 10 22:55:08.782853 sonic INFO /hostcfgd: Feature snmp is enabled and started
Sep 10 22:55:09.205381 sonic INFO /hostcfgd: Feature teamd is enabled and started
Sep 10 22:55:09.224877 sonic INFO /hostcfgd: Feature what-just-happened is enabled and started
Sep 10 22:55:09.627929 sonic INFO /hostcfgd: Feature lldp is enabled and started
Sep 10 22:55:10.086993 sonic INFO /hostcfgd: Feature swss is enabled and started
Sep 10 22:55:10.170312 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:11.012236 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:12.225946 sonic INFO /hostcfgd: Feature bgp is enabled and started
Sep 10 22:55:12.712792 sonic INFO /hostcfgd: Feature dhcp_relay is enabled and started
Sep 10 22:55:13.166656 sonic INFO /hostcfgd: Feature sflow is stopped and disabled
Sep 10 22:55:13.593639 sonic INFO /hostcfgd: Feature radv is enabled and started
Sep 10 22:55:14.034106 sonic INFO /hostcfgd: Feature syncd is enabled and started
Sep 10 22:55:14.113064 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:14.863601 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.1, op: SET, data: {'auth_type': 'pap', 'passkey': 'p*****', 'retransmit': '1', 'timeout': '1'}
Sep 10 22:55:14.938605 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 22:55:15.667545 sonic INFO /hostcfgd: RADIUS_SERVER update: key: 10.10.10.3, op: SET, data: {'auth_type': 'chap', 'passkey': 'p*****', 'retransmit': '2', 'timeout': '2'}
Sep 10 22:55:15.667801 sonic INFO /hostcfgd: RADIUS (NAS) IP change - key:eth0, current global info {}
Sep 10 22:55:15.746531 sonic INFO /hostcfgd: cmd - service aaastatsd stop
Sep 10 23:04:47.435340 sonic INFO /hostcfgd: ntp server update key 0.debian.pool.ntp.org
Sep 10 23:04:47.435661 sonic INFO /hostcfgd: ntp server update, restarting ntp-config, ntp servers configured {'0.debian.pool.ntp.org'}
Sep 10 23:04:47.866394 sonic INFO /hostcfgd: NTP GLOBAL Update
Sep 10 23:04:47.866557 sonic INFO /hostcfgd: ntp global update for source intf old {''} new {'eth0', 'Loopback0'}, restarting ntp-config
Sep 10 23:16:25.157600 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl unmask sflow.service'
Sep 10 23:16:25.178472 sonic INFO hostcfgd[192106]: Removed /etc/systemd/system/sflow.service.
Sep 10 23:16:25.582018 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl enable sflow.service'
Sep 10 23:16:25.604534 sonic INFO hostcfgd[192123]: Created symlink /etc/systemd/system/sonic.target.wants/sflow.service → /lib/systemd/system/sflow.service.
Sep 10 23:16:26.029416 sonic INFO /hostcfgd: Running cmd: 'sudo systemctl start sflow.service'
Sep 10 23:16:26.691927 sonic INFO /hostcfgd: Feature sflow is enabled and started
```
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Storage T0's have all vlan members as tagged
How I did it
Since currently minigraph does not have a unique way to identify if a vlan member is tagged/untagged and to ensure other scenarios are not broken, the logic used is to just update the vlan member type as 'tagged' when we determine that it is a storage backend device. This change will apply only to storage backend T0's since storage backend T1's will not have vlan member information
How to verify it
Updated the storage backend T0 testcases to check for tagged vlan members
Added testcase to check if a T1 and backend T1 device generates an empty vlan member table
Existing vlan member testcases are good enough for checking if any regression has been caused for regular T0's
Build sonic_config_engine-1.0-py3-none-any.whl successfully
#### Why I did it
Fix a recent build error introduced by a pre-release redis-py. This is a general issue because `python setup.py install` (ie `easy_instal`) does not ignore pre-release versions. The fix is suggested by https://github.com/pypa/setuptools/issues/855#issuecomment-583803959
8ea834b [sonic_installer] Change sonic_installer check ASIC mismatch by platforms list (#1836)
9017d99 Fix the option missing in kernel config issue (#1888)
6595ad4 [mlag] fix log print sequence (#1730)
e600e1c CLI command to load config in Yang format (#1781)
00948d0 Fix the target db version of portchannel-key test (#1842)
6412fea [sonic-package-manager] remove make_python_identifier (#1801)
f738818 [sonic-package-manager] stop service explicitelly before uninstalling package (#1805)
d8ee5e9 Remove exec from platform_reboot_plugin call to handle any hang issue. (#1879)
827fcee [chassis][routecheck]filter out the chassis internal interfaces (#1798)
4d732c6 [generic_config_updater] Logging (#1864)
25bb184 [config]: Add loopback interfaces to interface name checker (#1869)
c950a55 Validate input of config mirror_session add (#1825)
9ab20fd [show][config] fix the muxcable commands for interface naming mode (#1862)
476b3a4 [multi-asic][cli][chassis-db] Avoid connecting to chassis db for cli commands executed from linecard (#1707)
8bb9c5a (HEAD -> master, origin/master, origin/HEAD) Add retry reading/setting mux status to simulated y-cable driver (#221)
2ebd786 [sfp-refactor] Add initial support for SFF-8636 in sonic_xcvr (#218)
221fb8a Fix QSFP-DD power class mask (#212)
4598d40 [Y-Cable][Broadcom] upgrade to support Broadcom Y-Cable API to release 1.2 (#217)
0fdd198 [sfp-refactor] Add initial support for SFF-8436 in sonic_xcvr (#215)
a09f5a3 [sfp-refactor] Add new sonic_xcvr package for common transceiver logic (#201)
7ca4f51 Update SFP index definition (#214)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This pull request will fix bash build break issue when re-build bash.
#### Why I did it
src/bash project using quilt to manage patches, and quilt can't apply patch correctly when cache folder '.pc' is not clean.
#### How I did it
Add command in make file to remove quilt cache folder before apply patches.
#### How to verify it
Re-build bash target target/debs/buster/bash_5.1-2_amd64.deb to validate this fix work.
Pass all UT.
#### Which release branch to backport (provide reason below if selected)
N/A
#### Description for the changelog
Fix bash build break issue when re-build bash.
#### A picture of a cute animal (not mandatory but encouraged)
It is required by stretch/sonic-device-data_1.0-1_all.deb, which is required by docker-sonic-mgmt.gz.
Stretch distribution has old Python 3.5.3.
scandir.close() is new in Python version 3.6.
ref: https://docs.python.org/3/library/os.html#os.scandir.close
Fix the check used to wait for interfaces to come up. The group name in
the supervisor config files has changed from isc-dhcp-relay to
dhcp-relay.
Also, in the wait script, wait 10 additional seconds after the vlans,
port channels, and any interfaces are up. This is because dhcrelay
listens on all interfaces (in addition to port channels and vlans), and
to ensure that it stays in a clean state during runtime, wait some extra
time to make sure that those interfaces are created as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This makes it possible to install the debug symbols if needed. Also install
the package into the debug version of sonic-dhcp-relay container.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
With current code the delay will take place even if simple 'config reload' command executed and this is not desired.
This delay should be used only when fast-rebooting.
How I did it
Change the type of delay to OnBootSec instead of OnActiveSec.
How to verify it
Fast-reboot with this PR and observe the delay.
Run 'config-reload' command and observe no delay is running.
Redis 4.0.0b1 has been uploaded to pip as a prerelease version. This
version drops support for Python 2 and only supports Python 3. Because
setup.py is being run, it will use the latest version of a package and
not the latest stable version (which is still 3.5.3).
Therefore, pin the redis package to version 3.5.3, so that it will work
for both Python 2 and 3.
#### How to verify it
Make sure that redis-dump-load for Python 2 builds today.
1. Changes for Generation LC-Graph for packet-based chassis.
2. Added Support Ipv6 Peering on Loopback4096 for voq also
3. Updated asic topology yml files to be offset of slot
4. Made slot_num to take string slot<number> instead of number
5. Consolidated template_dpg_voq_asic.j2 into dpg_asic.j2
6. Remove Loopback4096 from asic topology and parse as dut invertory for
multi-asic
7. Updated topo_facts parsing for asic topology_
8. Internal BGP Session rename from <VoqChassisInternal> to <ChassisInternal> and take switch_type as value.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
This PR deletes local-to-buildimage linkmgrd and creates new submodule
pointing to github repo of sonic-linkmgrd.
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
This pull request extract tacacs support functions into library to share TACACS config file parse code with other project. Also fix memory leak issue in parse config code.
Why I did it
To support TACACS per command authorization, we need reuse the TACACS config file parse code in bash plugin project.
How I did it
Add libtacsupport.pc.in to extract tacacs support functions into library.
Fix memory leak issue in TACACS config parse code by convert the dynamic memory allocation memory to static memory allocation.
How to verify it
Pass all current UT.
Check shared library generated manually.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Extract tacacs support functions into library, this will share TACACS config file parse code with other project.
Also fix memory leak issue in parse config code.
Since database.service has been moved to execute after rc-local.service,
and determine-reboot-cause.service rely on database.service, we have to
specify that in "After=".
Signed-off-by: Xichen Lin <xichenlin@microsoft.com>
Co-authored-by: Xichen Lin <xichenlin@microsoft.com>
* To add portchannel support in frrcfgd and bgpcfgd
* Update is_zero_ip() to handle portchannel name
Signed-off-by: d-dashkov <Dmytro_Dashkov@Jabil.com>
This pull request add plugin support library to bash.
And we will create a TACACS+ plugin for bash in an other PR, which will bring per command authorization feature to bash.
Why I did it
To support TACACS per command authorization, we check user command before execute it.
How I did it
Add plugin support to bash.
How to verify it
UT with CUnit under bash project cover all new code in plugin.c.
Also pass all current UT.
Which release branch to backport (provide reason below if selected)
N/A
Description for the changelog
Add plugin support to bash.
Include the following commits:
f9bbed3cb86a3bab9a07745096835dbdbe5a4db6
Convert Unit Tests from unittest framework to pytest framework
e842c5ff317c67919dcbcab3358143cb9a16c9dd
Generate code coverage for Unit Tests
#### Why I did it
Add platform_asic file to each platform folder in sonic-device-data package. The file content will be used as the ground truth of mapping from PLATFORM_STRING to switch ASIC family.
One use case of the mapping is to prevent installing a wrong image, which targets for other ASIC platforms. For example, currently we have several ONIE images naming as sonic-*.bin, it's easy to mistakenly install the wrong image. With this mapping built into image, we could fetch the ONIE platform string, and figure out which ASIC it is using, and check we are installing the correct image.
After this PR merged, each platform vendor has to add one mandatory text file `device/PLATFORM_VENDOR/PLATFORM_STRING/platform_asic`, with the content of the platform's switch ASIC family.
I will update https://github.com/Azure/SONiC/wiki/Porting-Guide after this PR is merged.
You can get a list of the ASIC platforms by `ls -b platform | cat`. Currently the options are
```
barefoot
broadcom
cavium
centec
centec-arm64
generic
innovium
marvell
marvell-arm64
marvell-armhf
mellanox
nephos
p4
vs
```
Also support
```
broadcom-dnx
```
#### How I did it
#### How to verify it
Test one image on DUT. And check the folders under `/usr/share/sonic/device`
[Submodule advance sonic-swss]
Include below commits to master image:
Cache routes for single nexthop for faster retrieval Azure/sonic-swss#1922
Reduce route count for route perf test (Azure/sonic-swss#1928)
[pytest]: Re-use DVS container when possible (Azure/sonic-swss#1816)
[PORTSYNCD] when no ports on config db on init, continue and set Port… (Azure/sonic-swss#1861)
[gearbox] Add gearbox unit test (Azure/sonic-swss#1920)
Reverted skipped test_buffer_dynamic test cases (Azure/sonic-swss#1937)
Revert "[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STA… (Azure/sonic-swss#1945)
Why I did it
Add yang model for Feature configuration
How I did it
Add feature.yang and unit tests
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Changes:
-- pre Process Grouping section from all yang models, so it can be used
from any yang model.
-- add jsondiff in setup.py, it is useful for test debugging in case of
failures.
-- use 'stypes' instead of head.
-- pass config DB table name in _createLeafDict().
-- added test config for grouping.
-- white spaces changes.
Note: Changes are done in the way that we can add support for other
Generic YANG statement easily for translation.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
How I did it
Added if multi npu check before invoking the load global config.
How to verify it
Restart caclmgrd after this change and check if no error log is thrown.
Depends on Azure/sonic-utilities#1626
Depends on Azure/sonic-swss#1754
QOS tables in config db used ABNF format i.e "[TABLE_NAME|name] to refer fieldvalue to other qos tables.
Example:
Config DB:
"Ethernet92|3": {
"scheduler": "[SCHEDULER|scheduler.1]",
"wred_profile": "[WRED_PROFILE|AZURE_LOSSLESS]"
},
"Ethernet0|0": {
"profile": "[BUFFER_PROFILE|ingress_lossy_profile]"
},
"Ethernet0": {
"dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
"pfc_enable": "3,4",
"pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]",
"tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
"tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]"
},
This format is not consistent with other DB schema followed in sonic.
And also this reference in DB is not required, This is taken care by YANG "leafref".
Removed this format from all platform files to consistent with other sonic db schema.
Example:
"Ethernet92|3": {
"scheduler": "scheduler.1",
"wred_profile": "AZURE_LOSSLESS"
},
Dependent pull requests:
#7752 - To modify platfrom files
#7281 - Yang model
Azure/sonic-utilities#1626 - DB migration
Azure/sonic-swss#1754 - swss change to remove ABNF format
Why I did it
When feature state is set to always_enabled hostcfgd throws error message
Sep 21 22:30:55.135377 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature bgp
Sep 21 22:30:55.420268 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature database
Sep 21 22:30:58.672714 r-leopard-32 ERR /hostcfgd: Unexpected state value 'always_enabled' for feature swss
This is due to feature == always_enabled not handled properly.
How I did it
Handled the scenario when feature is always enabled
How to verify it
Restart hostcfgd with feature state configured as always_enabled and check if there are no errors.
Added UT to cover the scenario.
Why I did it
SONiC YANG model support for warm restart.
How I did it
Defined warm restart YANG containers and lists based on config-DB schema.
How to verify it
Successful build of the following packages:
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arthi Sivanantham <arthi_sivanantham@dell.com>
*[Submodule] update for swss with following commits:
a3fdaf4 QOS fieldvalue reference ABNF format to string changes ([sonic-platform-daemons] Update submodule #1754)
a8fcadf Add sleep to ensure starting route perf test after the vs is stable ([mellanox]: Update hw-mgmt service with the stop action #1929)
a89d1f8 Fix failing DPB LAG tests ([socat]: build socat with readline #1919)
86b4ede [portsorch] Avoid orchagent crash when set invalid interface types to port (Upgrade azure-keyvault to known compatible version #1906)
025032f [VS] Skip failing test - test_recirc_port ([rsyslog]: use # to separate container and program name in syslog msg #1918)
d338bd0 [pfcwd] Fix the polling interval time granularity (Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks #1912)
14c937e Enabling copp tests ([Mellanox] Update hw-management service config #1914)
fbdcaae [teammgrd]: Improve LAGs cleanup on shutdown: send SIGTERM directly to PID. ([docker-syncd-mlnx] add new mlnx-sfpd daemon to docker-syncd-mlnx #1841)
002bb1d [tlm teamd] Add retry mechanism before logging the ERR in get_dumps. ([py-swss/config] config load-minigraph failure leaves database in wrong state #1629)
57d21e7 [pfcwd] Convert polling interval from ms to us in LUA scripts ([interfaces]: Move IP/MTU information from interfaces file into database #1908)
d01524d [fgnhgorch] Enable packet flow when no FG ECMP neighbors are resolved (Update arista driver submodule to includes interrupt handling changes #1900)
8cf355d Mux state order change ([submodule] update snmpagent and dbsyncd, extending/implementing ieee802.1ab, rfc3433, rfc2737 MIBs #1902)
Why I did it
Added support for the device N3248PXE
How I did it
Implemented the support for the platform N3248PXE
n3248pxe_unit_test_log.txt
Switch Vendor: DellEMC
* Switch SKU: N3248PXE
* ASIC Vendor: Broadcom
* SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
Why I did it
Added support for the device N3248TE
How I did it
Implemented the support for the platform N3248TE
Switch Vendor: DellEMC
Switch SKU: N3248TE
ASIC Vendor: Broadcom
SONiC Image: sonic-broadcom.bin
How to verify it
Verified the show platform commands
The following fixes are included:
b502743 [gearbox] Since ASIC_DB, as well its COUNTER_DB, FLEX_COUNTER_DB use separator ':', GB_ASIC_DB
should use same ((Azure/sonic-swss-common#532)
81182ec Added support for setting TTL on a Table managed entry. ((Azure/sonic-swss-common#526)
Added sonic-pfcwd.yang file that defines the yang model for PFC watch dog parameters
sonic-pfcwd.yang is required for configuring action, detection_time, restoration time of PFC watchdog on the interface port.
2cd6236 [voq][chassis] Fix for issue in chassis redis server connection check (#110)
9da577d [port_util] Fix issue in function get_interface_oid_map (#114)
740a44c [port_util] Allow system without ports in config db run without errors (#109)
d07682e Merge pull request #111 from xumia/azp-coverage
482cac2 [Ethernet-IB][index] Modifed the port_util to support the VoQ Inband Port (#113)
69eac92 Support azp diff coverage
Signed-off-by: liora <liora@nvidia.com>
* [multi-asic][cli][chassis-db] Avoiding connecting to chassis db
Currently, for all the cli commands, we connect to all databases
mentioned in the database_config.json. The database_config.json also
includes the databases from chassis redis server from supervisor card.
It is unneccessary to connect to databases from chassis redis server
when cli commands are executed form linecard. But we need to allow
connection to chassis databases when the cli commands are executed from
supervisor card.
The changes in this PR fixes this problem. This PR requires that
asic.conf in supervisor card includes VOQ_SUPERVISOR with value 1 to
indentify the supervisor card. The connect_to_all_dbs_for_ns() is
changed to skip chassis databases form the list of collected databases
if the card is not supervisor card.
To Fix#8697 . The config load_minigraph initializes 'admin_status' to up when platform.json has DPB configs. This doesn't happen when using port_config.ini
The update minigraph has logic to initialize only the ports whose neighbors are defined or those belonging to portchannel
However, a change was introduced to have default admin status to be 'up' in portconfig.py when the minigraph was using platform.json
This will lead to sanity check failure in sonic-mgmt and thus no test cases could be run
Fix#8722
retreat two commits which cause warm reboot regression
* eb79ca4 2021-09-01 | [pbh]: Add PBH OA (#1782) [Nazarii Hnydyn]
* 3d6b1f0 2021-08-31 | [buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_ROOM_WATERMARK_BYTES on a pool where it is not supported (#1857) [Stephen Sun]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
What I did it
Add new platform x86_64-ragile_ra-b6910-64c-r0 (Tomahawk 3)
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk 3
Port Config: 64x100G
-How I did it
Provide device and platform related files.
-How to verify it
show platform fan
show platform ssdhealth
show platform psustatus
show platform summary
show platform syseeprom
show platform temperature
show interface status
To include sonic_installer swap setup changes
171eb4f [sonic_installer] Add swap setup support (#1787)
6483b0b QOS fieldvalue refernce ABNF format to string (#1626)
8d16eb5 [Fast-reboot] Set flex counters delay indicator to prevent flex counters enablement after fast-reboot (#1768)
1bc24ca [portstat pfcstat] Unify the packet number format in the output of portstat and pfcstat in all cases (#1755)
d7900dd [config][generic-update] Implementing patch sorting (2nd attempt) (#1794)
7ed9a91 [show] Allow system with no ports in config db run without errors (#1754)
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
Includes commits
```
d7900dd 2021-09-01 | [config][generic-update] Implementing patch sorting (2nd attempt) (#1794) [Mohamed Ghoneim]
7ed9a91 2021-09-01 | [show] Allow system with no ports in config db run without errors (#1754) [Lior Avramov]
```
Commits on Aug 17, 2021
[VS Test] Skip flaky tests (#1875) f501e1c
Skipping another flaky test temporarily (#1878) 15a014b
Commits on Aug 18, 2021
Change rif_rates.lua and port_rates.lua scripts to calculate rates co… ed867b1
Commits on Aug 20, 2021
[ACL] Match TCP protocol while matching TCP_FLAG (#1854) 756471a
Commits on Aug 23, 2021
[macsecmgrd] MACsec XPN changes (#1821) 4bf3d61
Commits on Aug 24, 2021
[ci]: fix artifacts download from swss-common and sairedis (#1882) 12f0ee7
Commits on Aug 26, 2021
[gearbox] Set port speed to SAI_PORT_ATTR_SPEED for gearbox (#1785) fc6cd81
[fpmsyncd][MPLS] updates for MPLS plus AZP libnl3 install (#1871) 76e3406
Commits on Aug 27, 2021
Fix vs test failure in test_buffer_traditional (#1881) db9ca83
Commits on Aug 31, 2021
[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_R… 3d6b1f0
Commits on Sep 01, 2021
[pbh]: Add PBH OA (#1782) eb79ca4
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
Reset flex counters delay flag on config DB when enable_counters script is called to allow enablement of flex counters in orchagent.
#### How I did it
Push to config DB 'false' value for delay indication when enable_counters script is called before enabling the counters.
#### How to verify it
Observe counters are created when enable_counters script is called.
Commits on Aug 25, 2021
[show][config] cli refactor for muxcable with abstract class implemen… 37039f5
[voq][chassis] VOQ cli show commands implementation (#1689) 7ebb2f7
[PBH] CLI for Policy Based Hashing (#1701) 6fd0675
Commits on Aug 26, 2021
[config reload] Call systemctl reset-failed for snmp,telemetry,mgmt-f… f5ce87a
Commits on Aug 27, 2021
Fix logic in RIF counters print (#1732) 83309c6
Commits on Aug 30, 2021
[ecnconfig] Fix exception seen during display and add unit tests (#1784) 3e8626e
Commits on Aug 31, 2021
[debug dump util] Module implementation Logic and Port Module (#1667) 720b650
#### Why I did it
Fixing issue [[sonic-utilities] Unit test failed when building sonic-utilities #1761](https://github.com/Azure/sonic-utilities/issues/1761)
Importing `sonic-acl` caused getting references by `backlinks()` to break,
#### How I did it
solution is to comment out the importing statement as it is not used anyway.
#### How to verify it
Ran sonic-utilities unit-tests locally after the fix, and all passed.
#### Why I did it
To bump thrift version to 0.13.0, to fix some dependencies issues.
#### How I did it
As there are dependencies between thrift and saithrinft server (bf3630316c/test/saithrift) which is used by syncd-rpc to update thrift version, I also need to make changes in saithrinft server, and then SAI ref point should be updated in sairedis, and then sairedis ref point should be updated too. It is too many change, so I decided to add thrift 0.13.0 as separeate target to be able to work and test father changes in saithrinft and one when appropriate changes will be merged to SAI and ref points will be updated I will squash this and the old thrift target. I was not able to build thrift deb pkg by original rules, so I copied `debian `folder from the old version and tune it for newer one.
#### How to verify it
```
make init
make configure PLATFORM=vs
make target/debs/buster/libthrift_0.13.0_amd64.deb
```
```
This PR updates the following commits in sonic-platform-daemons
e038bc2 [xcvrd] initial support for integrating vendor specfic class objects for calling Y-Cable API's inside xcvrd (#197)
57e3d78 Fix issue#8230 (#210)
f63fc94 [thermalctld] Use interval set in thermal policy if available (#164)
8b2227d [CI] Sum up Azp unit test code coverage (#209)
b880c48 [xrcvd]: Added unit test for sfp oir events (#205)
4a32b5a [y-cable] fix for logging the xcvrd metrics before writing the state to the State-DB (#208)
53e1532 (origin/shilong-test) Add str conversion for numeric xcvr info fields to xcvrd (#200)
03a4add Introduce mgmtinit delay after transceiver module insertion (#201)
This PR updates the following commits in sonic-platform-common
0dc71c1 Add y-cable driver for simulated mux (#213)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* e12c1c8 (origin/master, origin/HEAD) disk_check: Script updated (#1747)
* 27502f0 [dhcp_relay] Update CLI reference document and add a new API for ip address type (#1717)
* cd3ee78 [Config] Update config command of kdump (#1700)
* 4cb3b72 [Show] Update the subcommands of Kdump. (#1682)
* c03342f [sfputil] Gracefully handle improper 'specification_compliance' field (#1741)
* 103de86 [CLI][MPLS][Show] Fixed show and config mpls cli bug where invalid interfaces would pasâ#1770)
* 04cc047 [route_check] Filter out VNET routes (#1612)
* 9395ebd [show][platform] Revise chassis info fallback to only fall back on pmon crash (#1751)
508202b 2021-08-24 Add a new field for FLEX_COUNTER_TABLE to indicate delay for flex counters (#523)
9fd7dbf 2021-08-20 [logger] Make map access thread safe and proper terminate thread (#510)
e4c3d0b 2021-08-20 Test with coverage output, publish gcov on Azure pipelines (#517)
ef21bec 2021-08-18 Update schema.h to include config_db DHCP and state_db counter table (#521)
4e4eb9d 2021-08-19 [schema] Add next hop group table to schema (#475)
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
c17c370 [Y-Cable][Broadcom] Broadcom implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#208)
#### Why I did it
Allow cfggen to work on system without ports in platform.json or in port_config.ini
#### How I did it
Add json write of PORT section only if the dictionary that contains the ports is not empty.
#### How to verify it
sonic-cfggen -k ACS-MSN3700 -H -j /etc/sonic/init_cfg.json --print-data
Add a patch in ifupdown2 such that if DHCP is used for an interface, and
the policy setting sets dhcp-wait to no (meaning don't wait for dhclient
to acquire an IP address), then don't check to see if the interface has
a new IP address, since dhclient will still be working.
Fixes#8512.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
Update sonic-utilities submodule to include below commits:
29f4a16 Global and Interface commands for IPv6 Link local address enhancements (#1159)
a99d56d Improve config error handling on version_info (#1760)
5002745 Load the database global_db. (#1752)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
For gearbox support on arista_7280cr3mk, the following commit in sonic-sairedis is needed:
2021-07-21 c20321c Kamil Cudnik: [meta] Allow objects with the same key exist on different switches (#865)
Fix for sonic-cfggen exception during platform string read during fresh install and start of sonic in multi asic, /var/run/redisX/ is created after database docker is started.
with state of tdport from previous warm-reboot.
In case LAG was down before reboot, lacp->wr is not cleared.
In lacp_event_watch_port_flush_data we incremented nr_of_tdports and add
tdport to lacp->wr.state. In case lacp->wr.state already had this tdport
we do not set new state for tdport but appened a new item in
lacp->wr.state. In case we preformed warm-reboot and PortChannel member
was down, after reboot PortChannel member became up next warm-reboot
will initialize teamd with PortChannel member in down state.
Fix this issue by calling stop_wr_mode() when LAG was down. This was probably intended but missed.
#### Why I did it
To fix an issue seen in warm-reboot-sad test cases.
#### How I did it
I fixed it in SONiC libteam patch that adds warm-reboot support. Details in commit description.
#### How to verify it
Run warm-reboot-sad test on t0-56 topology.
If branch exist already, today FRR build fails. Branch may exist on rebuild.
With this PR, we will Checkout branch gracefully if branch exists already.
Signed-off-by: Praveen Chaudhary<pchaudhary@linkedin.com>
In version 3.0.0, If a broadcast address is specified in
/etc/network/interfaces, then when ifup is run, it will fail with an
error saying `'str' object has no attribute 'packed'`. This appears to
be because it expects all attributes for an interface to be "packable"
into a compact binary representation. However, it doesn't actually
convert the broadcast address into an IPNetwork object (other addresses
are handled).
Therefore, convert the broadcast address it reads in from a str to an
IPNetwork object.
Also explicitly specify the scope of the loopback address in
/etc/network/interfaces as host scope. Otherwise, it will get added as
global scope by default. As part of this, use JSON to parse ip's output
instead of text, for robustness.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
strncpy calls need to be mindful about the destination buffer size
passed in and doing an explicit null termination.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This PR for submodule update adds the following commits
ce51894 [Y-Cable] add the definition inside setup.py to include sonic_y_cable.credo as a package (#211)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
[DPB] BGP_NEIGHBOR yang model causing DPB errors.
How I did it
Allowed the BGP_NEIGHBOR list with just IP as the key to allow the current BGP neighbor table in the community.
How to verify it
Built the SONIC YANG models.
d8ca31c (origin/master, origin/HEAD, master) [vnet/vxlan] Add support of multiple mappers for the VxLAN tunnel (#1843)
7280e19 [orchagent][ports] Add port reference increment / decrement to lag member add / remove flows (#1825)
0217b66 [nhg]: Add support for weight in nexthop group member. (#1853)
df96059 VOQ: Nexthop for remote VOQ LC should be created on inband OIF. (#1823)
8f7ea14 Code changes to support IPv6 Link local enhancements (#1463)
8674b3c Open record file in append mode (#1845)
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
enable automated test suites to selectively run relevant tests ( or not run tests ) based upon a new port_type identifier in hwsku.json
How I did it
Modified the valid optional fields in validity check for hwsku.json per recommendation from Joe in
https://github.com/Azure/sonic-mgmt/pull/2654/files
Co-authored-by: Carl Keene <keene@nokia.com>
Signed-off-by: Rajkumar Pennadam Ramamoorthy rpennadamram@marvell.com
Why I did it
Install sonic image from ONIE. Once system is up, execute "config reload" command.
Root cause is that "determine-reboot-cause.service" was in failed state.
root@sonic:/host/reboot-cause# systemctl list-units --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● determine-reboot-cause.service loaded failed failed Reboot cause determination service
How I did it
Fixed the issue by setting default reason to "REBOOT_CAUSE_UNKNOWN" instead of "None".
How to verify it
Check " determine-reboot-cause.service' loaded successfully post image installation from ONIE.
Verify "reboot-cause.txt" file is created and config reload succeeds.
#### Why I did it
hostcfgd is starting at the same time as 'create_switch' method is called on orchagent process.
This introduce a degradation on the function execution time which eventually cause the fast-boot flow and a boot scenarion in general to run slower (~6 seconds).
This change will delay the start time of this daemon.
The aaastatsd will delay as well since it has a dependency on hostcfgd, so it is required to delay both.
90 seconds determined as the maximum allowed downtime for control plane to come back up on fast-boot flow.
#### How I did it
Add two timers for hostcfgd and aaastatsd services in order to delay the startup of these services.
#### How to verify it
Install an image with this change and observe the daemons start 90 seconds after the system boot.
This PR updates the following commits
cd3cca7 [Y-Cable][Credo] Credo implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#203)
bd694b2 Load interval from thermal_policy.json (#178)
c43dc17 [sonic_y_cable] add abstract class YCableBase required for Y-cable API support for multiple vendors (#186)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Update default cable len to 0m for TD2 (#8298)
* Update sonic-cfggen tests with the correct cable len
Signed-off-by: Neetha John <nejo@microsoft.com>
As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m.
Why I did it
To align with the changes in Azure/sonic-swss#1830
How to verify it
- With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool
- Cfggen tests passed with the cable len update
#### Why I did it
Remove the call to `SonicDBConfig.load_sonic_global_db_config()` in the multi asic functions.
The expection is the client calling this function will call `SonicDBConfig.load_sonic_global_db_config()`
This PR is dependent on the PR https://github.com/Azure/sonic-utilities/pull/1712
#### How to verify it
compile sonic-utilities
This PR is to update sonic-utilities for master branch
Changes including
```
54b74a2 [LLDP] Fix lldpshow script to enable display multiple MAC addresses on the same remote physical interface (#1657)
0d53b7a [sonic_installer] don't print errors when installing an image not supporting app ext (#1719)
394e2fb Implement script null_route_helper (#1737)
```
Signed-off-by: bingwang <bingwang@microsoft.com>
Included commits:
* dd01b56 disk_check updates:
* 8a74d03 [CLI][show][bgp] Fix the show ip bgp network command
* 679a4ba [MACsec]: Allow upgrade-docker for macsec container
* e9c73e8 [CLI][MPLS][Show] Added multi ASIC support for 'show mpls command'.
I have been seeing intermittent (~40%) build failures with the same error described in PR https://github.com/Azure/sonic-buildimage/pull/6592, even with that fix present
```
/usr/bin/ld: mibgroup/ip-forward-mib/ipCidrRouteTable/.libs/ipCidrRouteTable_interface.o: file not recognized: file truncated
...
libtool: error: 'mibgroup/ip-forward-mib/inetCidrRouteTable/inetCidrRouteTable_interface.lo' is not a valid libtool object
make[5]: *** [Makefile:1020: libnetsnmpmibs.la] Error 1
make[5]: *** Waiting for unfinished jobs....
```
#### How I did it
Use `-j1` for the libsnmp build regardless of the value of `$(MULTIARCH_QEMU_ENVIRON)`
#### How to verify it
Performed 10 builds of the libsnmp target (`target/debs/buster/libsnmp-base_5.7.3+dfsg-5_all.deb`) with and without this change. Without the change, hit the error 40% of the time. With the change did not see the error at all
Signed-off-by: Justin Sherman <jusherma@cisco.com>
0443e66050256a87f8e92db7cd3c36cc139ebe14 (HEAD -> master, origin/master, origin/HEAD) Remove DB Directory removal as part of make clean (#84)
085f29d1247f0333e6038751fa445b6068fcf987 Fix unhandled nil err check to prevent rpc causing a crash (#78)
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
The unit test failure was due to missing bgp graceful restart select
defer time configuration in voq_chassis.conf. Modified sample output
data file voq_chassis.conf to include this configuration.
Signed-off-by: vedganes <vedavinayagam.ganesan@nokia.com>
For multiasic, the back end asics use ip addresss of Loopback4096 for BGP router id. In VOQ multi-asic chassis there are no back end asics. All the asics are front end and the iBGP connections are established via Ethernet-IB of asics. Since these asics are not designated as BackEnd, the ip address of interface Loopback0 is used as BGP router id. Since the ip address of Loopback0 is same for all the asics in the line card, same router id is used for voq iBGP configurations and hence the iBGP connections are not established. Changes are done to fix this
Why I did it
In the config_db.json generated by minigraph "admin_status" attribute is missing for the VOQ inband interface port in the PORT table.
How I did it
Changes done to add admin_status attribute for voq inband interface port, if it exists in the PORT table keys.
Why I did it
There are scenarios that End-of-RIB comes from a part of the peers arrives after reconciliation. In such scenarios, if the route selection deferral timer has the default value of 360 seconds, FRR would not set up routes and all routes would be removed after reconciliation. This PR reduces the route selection deferral timer so that at least routes to parts of the peers get restored at the point of reconciliation.
Fix#7488
How I did it
Reduce route selection deferral timer for bgp graceful restart to 15 seconds.
#### Why I did it
Enhance DHCP monitor application following the implementation PR: https://github.com/Azure/sonic-buildimage/pull/7772
#### How I did it
Add the support for monitoring DHCPv6 packets.
#### How to verify it
Install an image with this PR and the implementation PR.
Update sonic-sairedis submodule to include below commits:
84fa50a Revert "[vs]: Start syncd by passing context configuration file and global context index. (#832)" (#859)
736dc3b Remove redudnant mention of platform cisco-8000 (#856)
969ad94 Support for cisco-8000 platform for sonic-sairedis/syncd (#823)
1eacd05 [sairedis] Client/Server add support for SAI stats api (#855)
59fedfa [sairedis] Client/Server support SAI fdb flush api (#853)
5c2aaae [syncd] bulk OID remove requires RID (#854)
7da0894 [sairedis] Client/Server support SAI query API (#848)
443ad36 [sairedis] Style refactor cleanup (#850)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
lazy_re had an issue when importing sonic-cfggen in another application that
uses re.search(). There is no much improvement of lazy_re today after many
other good optimization work done for sonic-cfggen. It served as a quick
temporary solution.
Some quick test for fast-reboot and warm-reboot done on top of 201911 branch:
Fast-reboot: from ASIC reset to ports in up state:
with lazy_re: 18 sec
without lazy_re: 18 sec
Warm-reboot: LAG restoration time:
with lazy_re: 73 sec
without lazy_re: 72 sec
So, there is no real optimization since the number of sonic-cfggen calls is greatly
reduced in latest SONiC. This means it is time to revert this change.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
To include:
> e168f1d 2021-07-19 pettershao-ragilenetworks: [python coverage] fix result color bar (Azure/sonic-platform-common#202)
> 87c81de 2021-07-13 Prince George: Fix Xcvrd crash due to invalid key access in type_of_media_interface, host_electrical_interface, connector_dict (Azure/sonic-platform-common#206)
> 4533f82 2021-06-21 ngoc-do: Add a template function that returns list of asics on module (Azure/sonic-platform-common#185)
> 1e860c5 2021-06-18 Aravind Mani: Fix decode error when parsing EEPROM fields (Azure/sonic-platform-common#199)
> 93641f3 2021-06-17 Sujin Kang: Unifying the platform api for get_pcie_aer_stats with PcieBase (Azure/sonic-platform-common#197)
This update includes the following commits
acb5d84 Neetha John 2021-07-20 [configlet] Python3 compatible syntax for extracting a key from the dict (#1721)
9b7c58b arlakshm 2021-07-20 Load the database global_db only once for show cli (#1712)
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
As per HLD - Azure/SONiC#625
FRR Patches:
0009-Link-local-scope-was-not-set-while-binding-socket-for-bgp-ipv6-link-local-neighbors.patch
Files modified : bgpd_network.c and bgpd/bgp_zebra.c
Fix for : Link local scope was not set while binding socket with local address causing socket errors for bgp ipv6 link local neighbors.
0010-VRF-interface-lookup-was-still-done-in-the-default-vrf.patch
Files modified : staticd/static_zebra.c
Fix for : VRF interface lookup was still done in the default-vrf which was causing the interface lookup to fail. Due to this static-route pointing to link-local was not getting installed.
0011-Changes-to-send-ipv6-link-local-address-as-nexthop-to-fpmsyncd.patch
Files modified : zebra/zebra_fpm_netlink.c
Fix for : Made changes to send ipv6 address as nexthop to fpmsyncd.
Depends on:
Azure/sonic-utilities#1159Azure/sonic-swss#1463
Signed-off-by: Akhilesh Samineni akhilesh.samineni@broadcom.com
It can be that service is not enabled but UnitFilePreset=enabled (case
for Application Extension):
```
Loaded: loaded (/lib/systemd/system/cpu-report.service; disabled; vendor preset: enabled)
```
This makes existing logic skip enabling the service.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
Currently SONiC use the 'isc-dhcp-relay' package to allow DHCP relay functionality on IPv4 networks only.
This will allow the IPv6 functionality along the IPv4 type.
How I did it
Edit supervisord template to start DHCPv6 instances when configured to do so on Config DB.
Align cfg unit test to the new change.
Add DHCPv6 relay minigraph parsing support and a suitable t0 topology xml file for UT.
How to verify it
Configure DHCPv6 agents as described on the feature HLD: Azure/SONiC#765
Test it with real client/server with IPv6 or use the dedicated automatic test: Azure/sonic-mgmt#3565
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
* Split docker-dhcp-relay.supervisord.conf.j2 template into several files for easier code maintenance
To include:
> 66e7817 2021-07-13 [pcied] Fix pcied failure to load due to 'pcied NameError: name 'self' is not defined' (Azure/sonic-platform-daemons#198)
> 3df6757 2021-07-08 [ci] fix result color bar in the code coverage report (Azure/sonic-platform-daemons#196)
Update sonic-snmpagent submodule to pick up new commits:
21d7d97 2021-07-12 Fix: SonicV2Connector behavior change: get_all will return empty dict if (#226)
0813b42 2021-07-12 Entries under .1.3.6.1.2.1.31.1.1.1.18 OID should return the "description" field of PORT_TABLE entries in APPL_DB or CONFIG_DB. (#224)
7a78703 2021-07-08 Install dotnet core to fix python gcov warning for code covery color bar showing (#215)
e0f36a5 2021-06-30 [multi-asic]: Udpate to use SonicDBConfig from swsscommon (#219)
266bd15 2021-06-10 Restored snmp vlan support per RFC1213 and added the missing support for RFC2863 (#218)
#### Why I did it
Update submodule pointer for swss to include recent changes
4f1d726 [portsorch] fix errors when moving port from one lag to another. (#1797)
ae44701 [orchagent] Put port configuration to APPL_DB according to autoneg mode (#1769)
5295f91 Add failure handling for SAI get operations (#1768)
7c7c451 Revert recirc port change (#1813)
5528ebf Cleanup code (#1814)
2d2749a [xcvrd] add debug logs for y_cable change events/probes (#195)
b2c6102 Collect asic info and store in CHASSIS_STATE_DB (#175)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Allow deploying DHCPv6 servers following the implementation PR: #7772
How I did it
Add DHCPv6 to minigraph.py on sonic-cfggen tool and improve the unit test to cover this change.
How to verify it
Try to deploy a switch with DHCPv6 servers.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Why I did it
Static route configuration should not depend on BGP_ASN. Remove the dependency on BGP_ASN for StaticRouteMgr.
Fix#8027
How I did it
Check if BGP_ASN field before configuring static route redistribution and wait until BGP_ASN is available to enable static route redistribution.
How to verify it
Add unit test to cover the scenario and verify the functionality on a virtual switch.
#### Why I did it
Restrict the min-links parameter in "config portchannel" to the range 1-1024.
FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
Align YANG model with limits in libteam and sonic-utilties.
#### How I did it
PR 1630 in sonic-utilities prevents CLI user from entering a value outside the allowed range. This PR does the following:
- Increases the maximum value of min-links from 128 to 1024.
- Provides validation in libteam, incorporating as a patch the code in https://git.kernel.org/pub/scm/linux/kernel/git/jpirko/libteam.git/commit/?id=69a7494bb77dc10bb27076add07b380dbd778592.
- Updates the Yang model upper limit from 128 to 1024 (was inconsistent with libteam value).
- Updates the Yang model lower limit from 1 to 0, since 0 is set as default in sonic-utilities which would fail its new range check otherwise.
- Added Yang tests for valid and invalid value.
#### How to verify it
config portchannel add PortChannel0004 --min-links 1024
Command should be accepted.
show interfaces portchannel
Output should show PortChannel0004, no errors on CLI.
config portchannel add PortChannel0005 --min-links 1025
Command should be rejected
show interfaces portchannel
Output should not show PortChannel0005 , no errors on CLI.
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
Updates YANG model to allow up to 1024 min_links for portchannel. FixesAzure/sonic-buildimage#6781 in conjunction with https://github.com/Azure/sonic-buildimage/pull/1630.
- Why I did it
Currently dhcp packets are disabled by the COPP manager for non ToRRouter type switches.
Even if the feature is enabled, DHCP packets wont hook to the CPU since the COPP manager will not trap this packets.
This change is to disable dhcp_relay by default for non ToRRouter switches from init_cfg.json.
With this approach, if the user want to enable the feature for non ToRRouter switches, manual enablement is required by the 'feature' configuration.
This is to keep the current approach for MSFT production issue with dhcp relay for non ToRRouter switched and allow the user to decide if to use it or not.
- How I did it
Configure dhcp_relay 'disabled' by default on init_cfg.json for non ToRRouter switches.
Remove the exclusion of dhcp packets on copp_cfg.json
- How to verify it
Enable dhcp_relay feature on a non ToRRouter switch.
Unit-tests modified so the default values on mocked CONFIG DB in 'test_vectors.py' for dhcp_relay will be 'disabled'.
This is by the change for 'init_cfg.json.j2'.
For ToRRouter the state will change from 'disabled' to 'enabled'.
Another test case added for a 'ToR' switch type, this is to test the state is 'enabled' if the user configured it to be so.
Why I did it
systemd-sonic-generator limits multi-asic unit file instances to 10 (single digit instance number 0 - 10). This limitation needs to be removed to handle more than 10 asics.
MAX_NUM_TARGETS and MAX_NUM_INSTALL_LINES limits to 15 which is not sufficient for systems with more than 15 asics.
Inside get_unit_files(), strcmp produce incorrect results due to non null terminated string being compared.
Added build UT support for systemd-sonic-generator
Changes:
3c485e5 [recorder] Fix incorrect attribute enum value capability query (#843)
677ebca [sairedis] Client/Server support zmq configuration file (#845)
7c70e34 [sairedis] Add support for bulk api in client/server (#844)
76d28a6 [pyext] Use SAI autogenerated saiswig.i (#837)
9949c48 [vslib] implement query for SAI_DEBUG_COUNTER_TYPE enum values (#842)
e385212 [MPLS] Minor tweaks to VS for MPLS support for CRM polling of MPLS In-segments and NHs.
d819f97 [meta] Add support for ignored attributes names (#836)
c163238 Add cisco-8000 checks to syncd_init_common (#839)
9aed2ff [sairedis] Add support for client server architecture (#838)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Updates:
888701b [Mellanox] Remove mstdump from Mellanoxs collect dump script ([Azure/sonic-utilities#1706])
4818360 [sonic-package-manager] support warm/fast reboot for extension packages ([Azure/sonic-utilities#1554])
793b847 [show priority-group drop counters] Remove backup with cached PG drop counters after 'config reload' ([Azure/sonic-utilities#1679])
24fe1ac [show][config] support for interface alias for muxcable commands ([Azure/sonic-utilities#1699])
Why I did it
Currently hostcfgd is implemented in a way each feature which is enabled/disabled triggering execution of systemctl enable/unmask commands which eventually trigger 'systemctl daemon-reload' command.
Each call like this cost 0.6s and overall add a overhead of ~12 seconds of CPU time.
This change will verify the desired state of a feature and the current state of this feature on systemd and trigger a system call only when must.
How I did it
Check each feature status on systemd before executing a system call to enable and reload the systemctl daemon.
How to verify it
Build an image with this change and observe less system calls are executed.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
186d8513 Pcieutil to load the platform api first instead of using common api (#1672)
7a82c069 [Mellanox] Update mellanox dump generation to include SDK dumps (#1640)
38f8c068 [sfputil] Expose error status fetched from STATE_DB or platform API to CLI (#1658)
c5d00ae4 [pfcwd] Fix the return code in invalid case (#1691)
57dc4032 [ci]: Fix config prompt question issue (#1693)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Before this change, a process running inside every SONiC container dealt with FEATURE table 'auto_restart' field and depending on the value decided whether a container has to be killed or not.
If killed service auto restart mechanism restarts the container.
This change moves the logic from container to the host daemon - hostcfgd.
The 'auto_restart' handling is kept in supervisor-proc-exit-listener but now it is not required for container that wants to support auto restart feature.
hostcfgd refactoring - move feature handling in another class.
override systemd service Restart= setting from hostcfgd.
remove default systemd Restart=always.
Signed-off-by: Stepan Blyshchak stepanb@nvidia.com
- Why I did it
Remove the need to deal with container orchestration logic from the container itself. Leave this logic to the orchestrator - host OS.
- How I did it
hostcfgd configures 'Restart=' value for systemd service.
- How to verify it
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp enabled
root@r-tigon-11:/home/admin# show feature status | grep lldp
lldp enabled enabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 20 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 5 seconds lldp
root@r-tigon-11:/home/admin# sudo config feature autorestart lldp disabled
root@r-tigon-11:/home/admin# docker exec -it lldp pkill -9 lldpd
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Up 35 seconds lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 3 seconds ago lldp
root@r-tigon-11:/home/admin# docker ps -a | grep lldp
65058396277c docker-lldp:latest "/usr/bin/docker-lld…" 2 days ago Exited (0) 39 seconds ago lldp
root@r-tigon-11:/home/admin#
Advance submodule head for sonic-swss
32261636 [BufferOrch] Don't call SAI API for BUFFER_POOL/PROFILE handling in case the op is DEL and the SAI OID is NULL (Azure/sonic-swss#1786)
6c88e47a [Dynamic Buffer Calc][Mellanox] Bug fixes and enhancements for the lua plugins for buffer pool calculation and headroom checking (Azure/sonic-swss#1781)
e86b900d [MPLS] sonic-swss changes for MPLS (Azure/sonic-swss#1686)
4c8e2b53 [Dynamic Buffer Calc] Avoid creating lossy PG for admin down ports during initialization (Azure/sonic-swss#1776)
36021246 [VS test stability] Skip flaky test for DPB (Azure/sonic-swss#1807)
c37cc1c5 Support for in-band-mgmt via management VRF (Azure/sonic-swss#1726)
1e3a532d Fix config prompt question issue (Azure/sonic-swss#1799)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
A recent version of contextlib2 (https://pypi.org/project/contextlib2/21.6.0/#history) has broken Python2 compatibility, so the version picked up by netaddr when using Python2 must be specified, or else builds fail
Co-authored-by: Tom Zhu <tom.zhu@metaswitch.com>
#### Why I did it
To ensure any environment variables which are configured in the build/test environment do not influence the behavior of sonic-py-common during unit tests. For example, variables which might be set by continuous integration pipelines.
#### How I did it
Add class-scoped pytest fixture to `TestDeviceInfo` class which stashes the current environment variables, clears them and yields. Once all the test cases in the class finish, the fixture will restore the original environment variables.
Also remove unnecessary unittest-style setup and teardown functions from interface_test.py
Advance submodule update with the following changes:
4475750 Config reload fix (#29)
cf60d5e [ci]: add proper azp (#26)
f0fbfe7 [CI] Set up CI with Azure Pipelines (#25)
879d7bd Include port default fec configuration to be included in ZTP configuration (#24)
a6ae955 Add a pre-defined plugin to download a list of files (#23)
6f0305b [MultiDB] Add multidb support to sonic-ztp (#16)
Discussion and requirement in Chassis discussion forum to NOT make the asic-id field in the DEVICE_METADATA mandatory. If this field "asic-id" is not present the orchagent will be started without the -i <asic_id> parameter
Ref: https://github.com/Azure/sonic-buildimage/blob/master/dockers/docker-orchagent/orchagent.sh#L39
How I did it
Made the check to see if the asic-id is valid and update the asic-id field in the DEVICE_METADATA
5708497 [show] fix show version (#1686)
9041ba0 [config] Adding sanity checks for config reload (#1664)
2cdadb5 [config]: Create portchannel with LACP key (#1473)
6f74ba5 [vnet_route_check] Fix logic for getting VNET routes from ASIC DB (#1653)
54fee0f Add range check on portchannel min-links (#1630)
53639ded [xcvrd] Add bitmap support for SFP error event (#184)
2fc05b21 Refactor Pcied and add unittest (#189)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
The current logic generates 'VLAN_SUB_INTERFACE' table if the device type is backend and cluster name contains 'str'. This is not a reliable method to determine a storage backend device
How I did it
Updated the logic to generate 'VLAN_SUB_INTERFACE' table if any of the following conditions hold true
- device is of type backend and ResourceType attribute is None
- device is of type backend and ResourceType attribute contains "Storage"
- device is of type backend and graph contains "Subinterface" section
Also updated the logic to set "is_storage_device" to True
- For Backend, if any of the above conditions hold true
- For Frontend, if ResourceType attribute contains "Storage"
How to verify it
Added new tests to verify the code changes and built sonic_config_engine-1.0-py3-none-any.whl successfully
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
In the multi asic platforms all the ASIC are advertising the same IPv6 /64 network from Loopback4096.
Therefore, the IPv6 loopback address of backend asic is not learnt on the frontend asic.
Change the bgpd.conf.main.conf.j2 template file to advertise the Loopback4096 ipv6 address as /128
Update sonic-py-swsssdk submodule to include below commits:
6be76f45 Add missing functions to be on par with swsscommon. (#107)
64232a0 (master) [CI] Setup proper Azp (#106)
9d019b0 [ci]: Set up CI with Azure Pipelines (#102)
fa760c4 Fix bug: use instance variable instead of class variable in ConfigDBConnector (#99)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
#### Why I did it
- To build flashrom properly with dependency tracking.
#### How I did it
- Moved flashrom code from platform/broadcom/sonic-platform-modules-dell/tools directory to src/flashrom directory.
- At the end, flashrom_0.9.7_amd64.deb package is build which will be installed in the devices.
- Currently flashrom builds only for Dell S6100 platforms.
Introduce new sonic-buildimage images for Broadcom DNX ASIC family.
sonic-broadcom-dnx.bin
sonic-aboot-broadcom-dnx.swi
How I did it
NO CHANGE to existing make commands
make init; make configure PLATFORM=broadcom; make target/sonic-aboot-broadcom.swi; make target/sonic-broadcom.bin
The difference now is that it will result in new broadcom images for DNX asic family as well.
sonic-broadcom.bin, sonic-broadcom-dnx.bin
sonic-aboot-broadcom.swi, sonic-aboot-broadcom-dnx.swi
Note: This PR also adds support for Broadcom SAI 5.0 (based on 1.8 SAI ) for DNX based platform + changes in platform x86_64-arista_7280cr3_32p4 bcm config files and platform_env.conf files
Signed-off-by: Arthi Sivanantham arthi_sivanantham@dell.com
Why I did it
SONiC YANG model support for AAA and TACACS features.
How I did it
Defined various AAA and TACACS YANG containers and lists based on config-DB schema.
How to verify it
Successful build of the following packages:
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Update sonic-utilities submodule. This include the following commits:
285960d [config]: Update environment file during config reload (#1673)
3f0ecd5 [config] Remove "reset failed" print lines from config reload (#1654)
a1c8751 Make the soft-reboot available in the SONiC image on master (#1681)
45e7b71 [Mellanox] Add all results from saisdkdump to the techsupport on Mellanox switches (#1660)
Why I did it
There is a regression on 2700 platform where the evidence points to the flex counter change.
How I did it
Back track the swss submodule head to exclude:
[flex-counters] Delay flex counters stats init for faster boot time (#1749)
Verified that image build from this PR doesn't trigger the crash.
Signed-off-by: Ying Xie ying.xie@microsoft.com
7670b49 [sonic_platform/sfp_base] Add common definition for get SFP error status (#194)
1336598 [CI] sonic-config-engine now depends on SONiC YANG packages (#198)
f57fee4 Add to check pcie configuration revision to get the right configuration. (#195)
4e3a0a0 Fix typo for midplane APIs. (#196)
fc2e9e2 [eeprom_tlv_info] Optimize EEPROM data process by using visitor pattern (#193)
Why I did it
SONiC YANG model support for BGP & route-map features.
How I did it
Defined various BGP and route-map YANG containers and lists based on config-DB schema.
How to verify it
Built the following successfully with various BGP & route-map unit test cases.
make target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl
make target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Updates sonic-platform-daemons submodule. Includes the following commits:
```
eb8a223 [xcvrd] Force cleanup of chassis global variable on deinit (#193)
a6903c0 [CI] sonic-config-engine now depends on SONiC YANG packages (#194)
bf60a27 Replace swsssdk.SonicV2Connector with swsscommon implementation (#191)
```
19615e3 Fixing db_migrator for Feature table (#1674)
d1c1c61 [tests]: skip some dynamic port breakout unit tests (#1677)
25669c3 [CI] sonic-config-engine now depends on SONiC YANG packages (#1675)
3ff68c4 [neighbor-advertiser] delete the tunnel maps appropriately (#1663)
a425ca2 [config] support for configuring muxcable to manual mode of operation (#1642)
25e17de [show platform summary] Add chassis hardware info to platform summary and version (#1624)
f5f2a00 [db_migrator] fix old 1911 feature config migration to a new one. (#1635)
56db162 [config] Fix config int add incorrect ip (#1414)
1da879c [db_migrator][Mellanox] Update Mellanox buffer migrator with 2km-cable supported (#1564)
c2b760f [sonic_package_manager] flush once finished saving docker image into temporary file (#1638)
cd69473 Replace swsssdk.ConfigDBConnector and SonicDBConfig with swsscommon implementation (#1620)
5f20365 Change to use rvtysh when calling the show commands (#1572)
51d6bf5 Fix Aboot breakage in sonic package manager in sonic-installer (#1625)
18bed46 [console][show] Force refresh all lines status during show line (#1641)
b616cd9 [TPID CONFIG] Added TPID configuration CLI support (#1618)
01eb4b1 [show] support for show muxcable firmware version of only active banks (#1629)
7744c8d [fdb]cli: fdb entries are cleared according to vlan or port or vlan&&port (#657)
e23c5ee Add psu hardware revision to psushow table (#1601)
f1726fe Make advance_version_for_expected_database available for other db migrator test cases as well (#1614)
5d1ad05 [show] add support for muxcable metrics (#1615)
feeab29 [config] Sort Config Db When Saving (#1623)
#### Why I did it
Recently, the build started failing with messages like
```
2021-06-16T16:55:02.8675603Z tests/hostcfgd/hostcfgd_test.py:5: in <module>
2021-06-16T16:55:02.8676208Z from parameterized import parameterized
2021-06-16T16:55:02.8677145Z E ModuleNotFoundError: No module named 'parameterized'
```
Unit tests for hostcfgd depend on the `parameterized` Python package, but it was never added as a dependency to the setup.py file. This dependency was added ~3 months ago. I'm not sure why we only started seeing this failure recently.
#### How I did it
Add 'parameterized' package as a test dependency in setup.py for sonic-host-services package
Why I did it
The SONiC switches get their docker images from local repo, populated during install with container images pre-built into SONiC FW. With the introduction of kubernetes, new docker images available in remote repo could be deployed. This requires dockerd to be able to pull images from remote repo.
Depending on the Switch network domain & config, it may or may not be able to reach the remote repo. In the case where remote repo is unreachable, we could potentially make Kubernetes server to also act as http-proxy.
How I did it
When admin explicitly enables, the kubernetes-server could be configured as docker-proxy. But any update to docker-proxy has to be via service-conf file environment variable, implying a "service restart docker" is required. But restart of dockerd is vey expensive, as it would restarts all dockers, including database docker.
To avoid dockerd restart, pre-configure an http_proxy using an unused IP. When k8s server is enabled to act as http-proxy, an IP table entry would be created to direct all traffic to the configured-unused-proxy-ip to the kubernetes-master IP. This way any update to Kubernetes master config would be just manipulating IPTables, which will be transparent to all modules, until dockerd needs to download from remote repo.
How to verify it
Configure a switch such that image repo is unreachable
Pre-configure dockerd with http_proxy.conf using an unused IP (e.g. 172.16.1.1)
Update ctrmgrd.service to invoke ctrmgrd.py with "-p" option.
Configure a k8s server, and deploy an image for feature with set_owner="kube"
Check if switch could successfully download the image or not.
Signed-off-by: Mykola Gerasymenko <mykolax.gerasymenko@intel.com>
Why I did it
Dynamic Port Breakout falls cause of PG_DROP yang model missing
How I did it
Add PG_DROP yang model and add check this field in unit test for yang model
How to verify it
Firstly try to do DPB (2x50G) for Ethernet0 port:
sudo config interface breakout Ethernet0 2x50G -f
After that try to do DPB (1x100G[40G]) for Ethernet0 port:
sudo config interface breakout Ethernet0 1x100G[40G] -f
Both commands should work correctly.
Why I did it
This PR adds changes in sonic-config-engine to consume configuration data in SONiC Yang schema and generate config_db entries
How I did it
Add a new file sonic_yang_cfg_generator .
This file has the functions to
parse yang data json and convert them in config_db json format.
Validate the converted config_db entries to make sure all the dependencies and constraints are met.
Add a new option -Y to the sonic-cfggen command for this purpose
Add unit tests
This capability is support only in sonic-config-engine Python3 package only
Why I did it
Quagga is no longer being used. Remove quagga-related code (e.g., docker-fpm-quagga, sonic-quagga, etc.).
How I did it
Remove quagga-related code.
Why I did it
portconfig.py gets PORT table from config_db if it is present. If not, port_config.ini files are parsed.
For multi-asic platform, if namespace is passed to get_port_config(), config_db connection was done to host namespace always and not to asic specific namespace.
Provides fix for: #7161
How I did it
Modify db connection function to connect to namespace config_db.
Why I did it
Update sonic-sairedis submodule to include below commits:
0e2105a [vs]: Start syncd by passing context configuration file and global context index. (#832)
f931ae4 [VS] Add support for context and multiple switches (#830)
59208de [submodule] Update SAI submodule (#829)
77d44f5 [Mellanox] Update mellanoxs dump generation to include SDK dumps (#833)
4fb571b Generalizing config.bcm support for BRCM silicons (#693)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
#### Why I did it
These methods were added to make some convenient platform and chassis information methods accessible through sonic-py-common. These methods were refactored from sonic-utilities and are used in the `show platform summary` and `show version` commands.
#### How I did it
There are two methods, one is `get_platform_info()` which simply calls local methods to collect useful platform information into a dictionary format, this came directly from sonic-utilities.
* [TPID CONFIG]TPID attribute Yang model and default TPID for Minigraph to configDB Changes
* Fixed alignment spacing issue, removed length and convert to use tpid_type typedef for both LAG and PORT tpid attribute, added description in port and portchannel leaf for the tpid attribute
fcf7cdc [patch] add patch "net: sch_generic: fix the missing new qdisc assignment bug" (#213)
This fixes an issue that flapping a LAG member port does not lead to this member being stuck in disabled state.
dad1287 [tunneldecaporch] Set default MTU for the overlay loopback interface (#1756)
1bc94d1 [orchagent] Fix typo in PortsOrch::initPortSupportedSpeeds (#1755)
a44e651 [nhg]: Add support for weight in nexthop group member. (#1752)
5c625b2 [Bulk mode] Limit the size of bulker (#1744)
d1cd0fd Fix error msg due to not supported "SAI_SWITCH_ATTR_MAX_NUMBER_OF_TEMP_SENSORS" attributes (#1745)
278770d [sub intf] Fix kernel side processing to enslave sub interface to non-default vrf (#1521)
031f536 support flush FDB entries per port and per vlan (#1064)
3629d70 [sonic-swss] Add port auto negotiation support to swss (#1714)
7c6ebb1 [fix] Use the same storm detection condition for queue occupancy non-zero case as the zero case (#1111)
fb06c32 [fabricportsorch] Add fabric support (#1459)
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Why I did it
The current code skips parsing bandwidth for DeviceMgmtLinks. We have a use case to set the speed for these type of links based on the bandwidth attribute in the minigraph
How to verify it
Ran sonic-cfggen on a minigraph and verified that interface of type DeviceMgmtLink has speed set in the PORT table from the bandwidth attribute in the minigraph
* Fixed systemd-sonic-generator for multi-asic
1. In function insert_instance_number instance_string was malloced for 2 char
size which was limiting the instance number value in instance_name to 1 digit.
Fixed insert_instance_number to use asprintf to generate instancd_name for
any number of instances. Added _GNU_SOURCE to CFLAGS for asprintf.
2. Fixed get_unit_files() to use calloc instead of malloc. Uninitialized memory
was causing incorrect string mismatch error while comparing unit file name
string.
3. Increased MAX_NUM_TARGETS and MAX_NUM_INSTALL_LINES values to 48 to handle more
asic instances.
4. Added build UT support for systemd-sonic-generator:
a. Refactor systemd-sonic-generator.c to be used with UT infra.
b. Added UT infra to run build UT for systemd-sonic-generator
c. Added functional level and program level UT class and test cases.
* Resolved review comments.
1. Explicitly setting global pointers to NULL in definitions.
2. Added a space before ": public" in class definitions to align style
with SONiC C++ files.
* Merged strtok_r statements in single command.
Signed-off-by: Anand Mehra <anamehra@cisco.com>
Includes following commits
9297a29 Mock path early so it will applied to sonic_py_common, mock platform_chassis (#188)
9ba52a2 Mock path early so it will applied to sonic_py_common, mock more swsscommon classes (#187)
1adf47b [chassisd] Add script to initialize chassis info in STATE_DB (#183)
Includes the following commits
295b68c Add return codes for FW install to component_base constants (#189)
e8e617d [sonic_sfp] Handle QSFP DD keys gracefully (#188)
Why I did it
k8s handles in lower case, so the code ensures that it uses hostname in all lower case
How I did it
Wrapper for device_info.get_hostname that returns in lower case. This wrapper is used in all places that require hostname to use in kubectl commands.
How to verify it
Device joins successfully.
When FECDisabled is set to true in minigraph.py, push 'fec' 'none' explicitly to config_db. When 'fec' is defined in port_config.ini do not override it with 'rs' for 100G
#### Why I did it
Update sonic-snmpaget submodule to pick up new commits:
> Extend rfc3433.py to support more Physical Entity Sensor MIB entries 28b9dfd3a2
#### How I did it
update the submodule pointer to including the new commits
#### How to verify it
run community snmp test.
Why I did it
Currently, there is a bug in the ntp.conf jinja2 template where it will ignore the src_intf directive in CONFIG_DB if there are multiple IP addresses associated with an interface. This code change fixes that bug and allows the template to select the correct source interface for NTP.
How I did it
I did this by modifying the macro in ntp.conf.j2 which determines if there is an ip address associated with an interface to set a state variable when it detects a valid interface entry in CONFIG_DB instead of outputting "true" directly (which could result in multiple "trues" outputted for interfaces with multiple valid IP addresses).
How to verify it
Add two ipv4 addresses to an interface in SONiC
Add the following configuration to config_db.json
{
"NTP": {
"global": {
"src_intf": "Ethernet1"
}
}
}
Replace Ethernet1 with the interface name of the one you assigned the IP addresses to.
Run sudo config reload -y
Open /etc/ntp.conf and verify that the following line exists
...
interface listen Ethernet1
...
The interface specified should be the one set in the previous steps.
Description for the changelog
[ntp] Fix ntp.conf template to allow setting of source port in CONFIG_DB
Signed-off-by: Neetha John nejo@microsoft.comFixes#7531
Why I did it
To enable bgp sessions to be established over subinterfaces
How I did it
Listen to VLAN_SUB_INTERFACE table in config db
How to verify it
Bgp sessions were established successfully over subinterface
Why I did it
Enable redistribution of static routes
How I did it
Enable redistribution of static routes when the first route is added to STATIC_ROUTE table of Config_DB and disable the redistribution when the last route is removed from STATIC_ROUTE table.
This PR updates the following commits in sonic-platform-daemons
e60804c [xcvrd] add support for logging mux_metrics events into state DB (#185)
807b304 [psud] Add PSU Hardware Revision to Redis STATE_DB (#179)
d0be634 [muxcable] Remove Xcvrd Sleep (#174)
cc3803f [thermalctld] Enable stopping thermal manager (#180)
665fcd9 [xcvrd] Fix crash for QSFP DD media (#181)
cdabd09 [xcvrd] Change the y_cable presence logic to use "mux_cable" table as identifier from Config DB (#176)
4be4306 [xcvrd] Enhance Media Settings (#177)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
Skip to use the web proxy when the packages have been in the proxy server.
For sai packages or the other packages, we will upload the the proxy server directly, the reproducible will skip to check the site, not necessary to change the version files.
[config]Static routes to config_db (#1534)
[DPB]: Shut down interface before dynamic port breakout (#1303)
[vlan] remove dhcp-relay as dhcp-relay commands will come as a plugin (#1378)
Add 'default' option for sFlow. (#1606)
[Command-Reference.md] Document new SNMP show and config commands (#1600)
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
1213d61 [thermal_manager_base] Add a stop function to thermal manager (#187)
a95834b [DeviceBase] Added hardware revision number to generic device properties (#184)
f4901a0 [voqinbandif]To support inband port as front panel port (#159)
