How I did it
Advance swss submodule head to include:
c3fb52b 2022-02-04 | Fix for missing lossless PG profile on certain ports (sonic-swss-common update for Vnet tables #2133) (HEAD -> 202012, github/202012) [Ying Xie]
Signed-off-by: Ying Xie ying.xie@microsoft.com
Why I did it
the strcpy and buffer allocation is not safe, it corrupts 1 byte on the stack. Depending on the memory layout, it may or may not cause issue immediately.
message type is not validated before updating the counter. Which could cause segment fault.
How I did it
Remove the unsafe strcpy, use config->interface.c_str() instead.
Check message type before updating counters.
How to verify it
The issue (1) caused segment fault on a specific platform. The fix was validated there. Issue (2) was precautionary. Added log in case it triggers.
Why I did it
To enable test support for BFD-related features, the PTF docker needs to have the proper support for BFD. This PR aims to add BFD support in ptf docker.
How I did it
Clone and build OpenBFDD for PTF docker.
How to verify it
Build locally and verify BFD is supported.
This is to save about 40MB of disk space, since 5 containers
individually install this package.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
(cherry picked from commit bd479cad29)
Why I did it
Cherry pick changes in #9197 to 202012 branch
Add bgpcfgd support to advertise routes.
How I did it
Make bgpcfgd subscribe to the ADVERTISE_NETWORK table in STATE_DB and configure route advertisement accordingly.
How to verify it
Added unit tests in bgpcfgd and verify on KVM about route advertisement.
- Why I did it
To include latest fixes.
1. On CMIS modules, after low power configuration, the firmware waited for the module state to be ModuleReady instead of ModuleLowPower causing delays.
2. When connecting SN4600C, 100GbE port with CWDM4 module (Gen 3.0), link up time is 30 seconds.
3. Add T1 ECMP Overlay support
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
[buffer orch] Bugfix: Don't query counter SAI_BUFFER_POOL_STAT_XOFF_ROOM_WATERMARK_BYTES on a pool where it is not supported (#1857) (#2106)
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Tested on a Celestica Seastone2 DX030 switch
Testing scenarios:
- Various QSFP ports in both normal and breakout config.
- 100G and 40G link speed show different colors.
- SFP1 port works.
Signed-off-by: Christian Svensson <blue@cmd.nu>
This makes it possible to install the debug symbols if needed. Also install
the package into the debug version of sonic-dhcp-relay container.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update submodule sonic-sairedis that contains the following commit:
Change the log severity leve from ERROR to NOTICE if getStatus is not supported by vendor (#908) (#991)
Commits:
02dea43 [202012] Add support for BFD notification (#990)
337fd97 Change sonic-buildimage.vs artifact source from CI build to official build. (#992)
490f442 Support for cisco-8000 platform for sonic-sairedis/syncd (#823)
Why I did it
Eliminate benign firsttime boot error reported when running on platforms that do not support kdump.
How I did it
Change rc.local to check for presence of the file /etc/default/kdump-tools before referencing it.
How to verify it
Install a new image on an armhf or arm64 platform and check for a failed reference to /etc/default/kdump-tools on firsttime boot.
- Why I did it
Optimize thermal control policies to simplify the logic and add more protection code in policies to make sure it works even if kernel algorithm does not work.
- How I did it
Reduce unused thermal policies
Add timely ASIC temperature check in thermal policy to make sure ASIC temperature and fan speed is coordinated
Minimum allowed fan speed now is calculated by max of the expected fan speed among all policies
Move some logic from fan.py to thermal.py to make it more readable
- How to verify it
1. Manual test
2. Regression
Advanced submodule to pick up QSFP port mapping improvements:
[202012][sonic_sfp]: prefer Config DB port index mapping over platform.json/port_config.ini
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
resolves https://github.com/Azure/sonic-buildimage/issues/8779
snmpd writes the below error message in syslog :
snmp#snmpd[27]: truncating integer value > 32 bits
This message is written in syslog when the hrSystemUptime(1.3.6.1.2.1.25.1.1.0 / system uptime) or sysUpTime(1.3.6.1.2.1.1.3 network management portion or snmpd uptime) is queried when either of these counters overflow beyond 32 bit value. This happens the device uptime or snmpd uptime is more than 497 days.
#### How I did it
Reference: https://access.redhat.com/solutions/367093 and https://linux.die.net/man/1/snmpcmd
To avoid seeing this message if the counter grows, the snmpd error log level is changed to display LOG_EMERG, LOG_ALERT, LOG_CRIT, and LOG_DEBUG.
Without this change, LOG_ERR and LOG_WARNING would also be logged in syslog.
#### How to verify it
On a device which is up for more than 497 days, modify supervisord.conf with the change and restart snmp.
Query 1.3.6.1.2.1.1.3 and verify that log message is not seen.
Taken from https://github.com/Azure/sonic-buildimage/pull/9539
#### Why I did it
To fix an issue that hw-mgmt patches were not applied. One patch was already in upstream hw-mgmt package thus applying it again caused an error and no other patches were applied. Also, I did it to improve the Makefile, so that the make will fail in case patches fail to apply.
#### How I did it
Removed obsolete patch, made applying patches a hard failure in the build.
#### How to verify it
Run the make and verify patches are applied.
- Why I did it
Add sensor conf for MSN4600C A1 platform
- How I did it
Add a new sensor conf file and relevant scripts to support two different versions of the platform
- How to verify it
Run "sensors" cmd to check the output on the A1 platform to see whether it's as expected.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Bug fix:
bad_param request due to missing parser rest command while running mlxlink
- How I did it
Advance to MFT tool version to 4.17.2-12.
- How to verify it
Manually tested on all mellanox platforms.
* Add thrift 0.13.0 (#8307)
#### Why I did it
To bump thrift version to 0.13.0, to fix some dependencies issues.
#### How I did it
As there are dependencies between thrift and saithrinft server (bf3630316c/test/saithrift) which is used by syncd-rpc to update thrift version, I also need to make changes in saithrinft server, and then SAI ref point should be updated in sairedis, and then sairedis ref point should be updated too. It is too many change, so I decided to add thrift 0.13.0 as separeate target to be able to work and test father changes in saithrinft and one when appropriate changes will be merged to SAI and ref points will be updated I will squash this and the old thrift target. I was not able to build thrift deb pkg by original rules, so I copied `debian `folder from the old version and tune it for newer one.
#### How to verify it
```
make init
make configure PLATFORM=vs
make target/debs/buster/libthrift_0.13.0_amd64.deb
```
```
* Correct the pkg name for thrift.0.13.0
Correct thrift.0.13.0 dependent package name.
In previous code, the buildout target was named as PYTHON3_THRIFT_0_13_0
But when add the prackage to LIBTHRIFT_0_13_0, it typo as PYTHON_THRIFT_0_13_0
Co-authored-by: Myron Sosyak <myronx.sosyak@intel.com>
Update submodule sonic-utilities that contains the following commits:
Revert "[202012] [generate_dump] allow to extend dump with plugin scripts (#1945)" (#1993)
[soft-reboot] Add support for platforms based on Device Tree (#1963)
[Reclaiming buffer][202012] Database migrator for reclaiming buffer (#1898)
[202012] [generate_dump] allow to extend dump with plugin scripts (#1945)
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
Update hw-mgmt to a new version to pick up support for the SN4600C A1 system.
- How I did it
Update the pointer of the hw-mgmt submodule
Update the hw-mgmt version number
Remove the staled code patch to hw-mgmt userspace code.
- How to verify it
Run platform regression on Mellanox platforms.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Fix typo and missing files in SN3800 and SN4600C's buffer templates
How I did it
ingress_lossless_xoff_size => ingress_lossless_pool_xoff add missing files for SN4600C-D100C12S2
How to verify it
Deploy the fix and verify whether the device can be up.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
#### Why I did it
To pick up fixes from submodule sonic-sairedis which include the following fixes:
```
commit 1027eef3a331e84560827c7584ee8009baf434d5 (HEAD -> 202012, origin/202012)
Author: gechiang <62408185+gechiang@users.noreply.github.com>
Date: Wed Dec 8 03:13:34 2021 -0800
[202012] Prevent other notification event storms to keep enqueue unchecked and drained all memory that leads to crashing the switch router (#976)
commit 94455e50d3444dcd60093b7a39c7f427337a94d2
Author: VenkatCisco <77468614+VenkatCisco@users.noreply.github.com>
Date: Tue Jun 15 03:23:20 2021 -0700
Add cisco-8000 checks to syncd_init_common (#839)
commit 2df539483ed68519c3c9c6df958d3ed2f31dd629
Author: Kamil Cudnik <kcudnik@gmail.com>
Date: Mon Dec 6 20:50:23 2021 +0100
[lgtm] Add gmock libs to lgtm (#979)
```
#### Why I did it
Update sonic-swss-common
54879741 [202012][schema] Add vnet route tunnel and advertise network tables for state_db (Azure/sonic-swss-common#563)
a5394f9d Update for BFD, default route table (Azure/sonic-swss-common#550)
Update sonic-swss
fbbe5bcc [202012][pfc_detect] fix RedisReply errors (Azure/sonic-swss#2078)
5762b0c2 [Reclaim buffer][202012] Reclaim unused buffer for dynamic buffer model (Azure/sonic-swss#1985)
33e9bd19 [Document][202012] Supply the missing ingress/egress port profile list in document (Azure/sonic-swss#2066)
1b6ffba1 [Reclaiming buffer][202012] Support reclaiming buffer in traditional buffer model (Azure/sonic-swss#2063)
afb33f16 [202012] Update default route status to state DB (Azure/sonic-swss#2009) (Azure/sonic-swss#2067)
b9c44f75 Common code update for reclaiming buffer (backport community PR Azure/sonic-swss#1996 to 202106/202012) (Azure/sonic-swss#2061)
cf5182d8 [request parser] Allow request parser to parse multiple values
#### Why I did it
The capability files were incorrect in comparison to the marketing spec of the SN4410 platform.
#### How I did it
Aligned the capability files according to the marketing spec.
#### How to verify it
Did basic manual sanity checks:
- Check if critical docker containers were UP
- Check if interfaces were created and were UP
- Check if interfaces created in the syncd docker container by executing – sx_api_ports_dump.py script
- Check the logs from the start of the switch – everything was OK
- Verified the port breakout
