Why I did it
We need to store information of power shelf in config_db for SONiC MX switch. Current minigraph parser cannot parse rack_mgmt_map field.
Work item tracking
Microsoft ADO (number only): 22179645
How I did it
Add support for parsing rack_mgmt_map.
What I did:
Updated Static Route Attribute in Minigraph. NGS Minigraph has define semantics of static route differently.
See below for differences:-
Microsoft ADO: 17956325
Before
<AssociatedTo>8.0.0.1/32</AssociatedTo>
<Address>192.168.1.2,192.168.2.2</Address>
<AttachTo>PortChannel40,PortChannel50</AttachTo>
Now:
<Address>8.0.0.1</Address>
<AttachTo>PortChannel40,192.168.1.2;PortChannel50,192.168.2.2</AttachTo>
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* Update PG headroom settings ports based on port speed/cable length
* Updated XOFF settings to use chip level numbers than core
* Updated PG headroom based on uplink/downlink side
* fix for sonic-config-gen tests
* More fixes for unit test cases
* more test fixes
* Merged multiple functions into one
Add new Nokia build target and establish an arm64 build:
Platform: arm64-nokia_ixs7215_52xb-r0
HwSKU: Nokia-7215-A1
ASIC: marvell
Port Config: 48x1G + 4x10G
How I did it
- Change make files for saiserver and syncd to use Bulleseye kernel
- Change Marvell SAI version to 1.11.0-1
- Add Prestera make files to build kernel, Flattened Device Tree blob and ramdisk for arm64 platforms
- Provide device and platform related files for new platform support (arm64-nokia_ixs7215_52xb-r0).
Following changes are done:
Added Support where if asic configuration is not present in minigraph sonic-cfggen do not error out but instead process it gracefully.
Use Case: In Supervisor we have number of asic are define as max possible but in minigraph configuration of only valid/available asics only are present. Without this change load_minigraph fails.
Microsoft ADO: 17956325
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Why I did it
Our k8s feature will pull new version container images for each upgrade, the container images inside sonic will be more and more, but for now we don’t have a way to clean up the old version container images, the disk may be filled up. Need to add cleaning up the old version container images logic.
Work item tracking
Microsoft ADO (number only):
17979809
How I did it
Remove the old version container images besides the feature's current version and last version image, last version image is saved for supporting fallback.
How to verify it
Check whether the old version images are removed
Why I did it
Fix#15000
isc-dhcp 4.4.1-2.3+deb11u1 is no longer available in debian repository
How I did it
update isc-dhcp to new version 4.4.1-2.3+deb11u2
Why I did it
replace yaml.load to yaml.safe_load because yaml.safe_load is more secure
Work item tracking
Microsoft ADO (number only): 15022050
How I did it
How to verify it
Verified in DUT 201911 which yaml version < 5.1
- Why I did it
Add fan direction check to system health, all fans should be in the same direction
- How I did it
Add fan direction check to system health, all fans should be in the same direction
- How to verify it
Manual test
Unit test
Added sonic-mgmt test case to verify
Why I did it
To support BGPMon sessions from each T2 linecard ASIC
Work item tracking
Microsoft ADO (number only): 17873174
How I did it
Added change in BGPMon configuration to use Loopback4096 as source interface, since this has a unique IP per ASIC.
How to verify it
Tested by manually setting up BGPMon session on T2 LC and verified that Loopback4096 could be used as source
What I did:
In FRR command update source <interface-name> is not at address-family level. Because of this
internal peer route-map for ipv6 were getting applied to ipv4 address family. As a result
TSA over iBGP for Ipv6 was not getting applied.
How I verify:
Manual Verification of TSA over both ipv4 and ipv6 after fix works fine.
Updated UT for this.
Added sonic-mgmt test gap: sonic-net/sonic-mgmt#8170
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
There are chassis-packet and Single asic platforms which support this 400G to 100G/40G speed change via config.
Enabling this feature for all platforms which can support this. Keeping it enabled for all does not affect the platforms
which do not support this feature yet.
Signed-off-by: anamehra anamehra@cisco.com
Why I did it
Do not require leafref as part of yang. Only need string to compare whether string received from event matches what is possible for ifname.
How I did it
How to verify it
Run UT
Why I did it
Update ECN settings for T2 chassis
How I did it
Updated qos config file to load these settings during switch bootup
How to verify it
Verified on line card on T2 chassis
Why I did it
Support for SONIC chassis isolation using TSA and un-isolation using TSB from supervisor module
Work item tracking
Microsoft ADO (number only): 17826134
How I did it
When TSA is run on the supervisor, it triggers TSA on each of the linecards using the secure rexec infrastructure introduced in sonic-net/sonic-utilities#2701. User password is requested to allow secure login to linecards through ssh, before execution of TSA/TSB on the linecards
TSA of the chassis withdraws routes from all the external BGP neighbors on each linecard, in order to isolate the entire chassis. No route withdrawal is done from the internal BGP sessions between the linecards to prevent transient drops during internal route deletion. With these changes, complete isolation of a single linecard using TSA will not be possible (a separate CLI/script option will be introduced at a later time to achieve this)
Changes also include no-stats option with TSC for quick retrieval of the current system isolation state
This PR also reverts changes in #11403
How to verify it
These changes have a dependency on sonic-net/sonic-utilities#2701 for testing
Run TSA from supervisor module and ensure transition to Maintenance mode on each linecard
Verify that all routes are withdrawn from eBGP neighbors on all linecards
Run TSB from supervisor module and ensure transition to Normal mode on each linecard
Verify that all routes are re-advertised from eBGP neighbors on all linecards
Run TSC no-stats from supervisor and verify that just the system maintenance state is returned from all linecards
Why I did it
systemd stop event on service with timers can sometime delete the state_db entry for the corresponding service.
Note: This won't be observed on the latest master label since the dependency on timer was removed with the recent config reload enhancement. However, it is better to have the fix since there might be some systemd services added to system health daemon in the future which may contain timers
root@qa-eth-vt01-4-3700c:/home/admin# systemctl stop snmp
root@qa-eth-vt01-4-3700c:/home/admin# show system-health sysready-status
System is not ready - one or more services are not up
Service-Name Service-Status App-Ready-Status Down-Reason
---------------------- ---------------- ------------------ -------------
<Truncated>
ssh OK OK -
swss OK OK -
syncd OK OK -
sysstat OK OK -
teamd OK OK -
telemetry OK OK -
what-just-happened OK OK -
ztp OK OK -
<Truncated>
Expected
Should see a Down entry for SNMP instead of the entry being deleted from the STATE_DB
root@qa-eth-vt01-4-3700c:/home/admin# show system-health sysready-status
System is not ready - one or more services are not up
Service-Name Service-Status App-Ready-Status Down-Reason
---------------------- ---------------- ------------------ -------------
<Truncated>
snmp Down Down Inactive
ssh OK OK -
swss OK OK -
syncd OK OK -
sysstat OK OK -
teamd OK OK -
telemetry OK OK -
what-just-happened OK OK -
ztp OK OK -
<Truncated>
How I did it
Happens because the timer is usually a PartOf service and thus a stop on service is propagated to timer. Fixed the logic to handle this
Apr 18 02:06:47.711252 r-lionfish-16 DEBUG healthd: Main process- received event:snmp.service from source:sysbus time:2023-04-17 23:06:47
Apr 18 02:06:47.711347 r-lionfish-16 INFO healthd: check_unit_status for [ snmp.service ]
Apr 18 02:06:47.722363 r-lionfish-16 INFO healthd: snmp.service service state changed to [inactive/dead]
Apr 18 02:06:47.723230 r-lionfish-16 DEBUG healthd: Main process- received event:snmp.timer from source:sysbus time:2023-04-17 23:06:47
Apr 18 02:06:47.723328 r-lionfish-16 INFO healthd: check_unit_status for [ snmp.timer ]
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
* Support ACL interface type BmcData in minigraph parser
* Support ACL interface type BmcData in minigraph parser
* add unittest
* Add a global dict for storing the defination of custom acl tables
- Why I did it
Extend the CRM YANG model with DASH attributes.
- How I did it
Add new attributes to the existing CRM YANG model.
Implement tests for DASH CRM attributes.
- How to verify it
Build sonic_yang_models packages. The tests will be run automatically.
Fix per-command authorization failed issue when a command with wildcard match more than hundred files.
#### Why I did it
When user enable TACACS per-command authorization, and run a command with wildcard , if the command match more than hundreds of files, the per-command authorization will failed with following message:
*** authorize failed by TACACS+ with given arguments, not executing
The root cause of this issue is because bash will match files with wildcard and replace with wildcard args with matched files. when there are too many files, TACACS plugin will generate a big authorization request, which will be reject by server side.
##### Work item tracking
- Microsoft ADO **(number only)**: 18074861
#### How I did it
Fix bash patch file, use original user inputs as authorization parameters.
#### How to verify it
Pass all UT.
Create new UT to validate the TACACS authorization request are using original command arguments.
UT PR: https://github.com/sonic-net/sonic-mgmt/pull/8115
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [X] 202205
- [X] 202211
#### Tested branch (Please provide the tested image version)
- [x] 202205.258490-412b83d0f
- [x] 202211.71966120-1b971c54b5
#### Description for the changelog
Fix per-command authorization failed issue when a command with wildcard match more than hundred files.
#### Why I did it
sonic-config-engine unit test needs to detect missing yang models.
#### How I did it
Update unit test, return error for missing yang models.
#### How to verify it
Run unit test for sonic-config-engine
#### Why I did it
Yang model for NEIGH table was missing
Fixed https://github.com/sonic-net/sonic-buildimage/issues/13971
#### How I did it
added sonic-neigh.yang model
#### How to verify it
make buildimage
#### Description for the changelog
Adding NEIGH yang model
Signed-off-by: Stepan Blyschak stepanb@nvidia.com
DEPENDS: #12852
Why I did it
To support BGP pending FIB suppression.
How I did it
I backported patches from FRR 8.4 feature that allows communicating ASIC route status back to FRR.
Also, added a new field in DEVICE_METADATA YANG model table. Added UT for YANG model changes.
How to verify it
Run on the switch.
Open
[minigraph] add support for changing T1 ports speed from 400G to 100G and vice-versa
#14505
vdahiya12 wants to merge 9 commits into sonic-net:master from vdahiya12:dev/vdahiya/minigraph_parser
Conversation 10
Commits 9
Checks 18
Files changed 5
Conversation
vdahiya12
@vdahiya12 vdahiya12 commented 2 weeks ago •
On SONiC T1 cisco 8101 HwSku, the speed changes are done from 400G to 100G needs to be supported on 400G ports.
To enable this, along with speed change the port lanes need to be changed. This PR has the changes to update the port lanes when such speed change happens.
Basically if Banwidth in minigraph.xml intends to enable a 100G speed on a 400G port, then the appropriate lane change and speed change needs to be invoked in mingraph parser
Example if port_config.ini dicatates the speed to be 400G and minigraph has 100G speed, then this changeneeds to be accommodated
# name lanes alias index speed channel
Ethernet96 1536,1537,1538,1539,1540,1541,1542,1543 etp12 12 400000 0
<DeviceLinkBase>
<ElementType>DeviceInterfaceLink</ElementType>
<EndDevice>ARISTA01T2</EndDevice>
<EndPort>Ethernet1</EndPort>
<StartDevice>Device-8101-01</StartDevice>
<StartPort>etp12</StartPort>
<Bandwidth>100000</Bandwidth>
</DeviceLinkBase>
These platforms today have 400g port with 8 serdes lines, and 100g will operate with 4 serdes lane. When the port speed changes from 400G to 100G the first 4 lanes will be used for 100G port.
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* Fix backend port channels and routes being displayed
In `show interface portchannel` and `show ip route`, backend port
channels and routes were being displayed. This is due to changes in #13660.
Fix these issues by switching to reading from PORTCHANNEL_MEMBERS table
instead.
Fixes#14459.
* Replace table name with constant
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
Implementing code changes for https://github.com/sonic-net/SONiC/pull/1203
#### How I did it
Removed the timers and delayed target since the delayed services would start based on event driven approach.
Cleared port table during config reload and cold reboot scenario.
Modified yang model, init_cfg.json to change has_timer to delayed
#### How to verify it
Running regression
Why I did it
Optimize the version control for Debian packages.
Fix sonic-slave-buster/sources.list.amd64 not found display issue, need to generate the file before running the shell command to evaluate the sonic image tag.
When using the snapshot mirror, it is not necessary to update the version file based on the base image. It will reduce the version dependency issue, when an image is not run when freezing the version.
How I did it
Not to update the version file when snapshot mirror enabled.
How to verify it
Why I did it
refine reproducible build.
How I did it
Fix reset map variable in bash.
Ignore empty web file md5sum value.
If web file didn't backup in azure storage, use file on web.
How to verify i
- Why I did it
To solve an issue with upgrade with fast-reboot including FW upgrade which has been introduced since moving to fast-reboot over warm-reboot infrastructure.
As well, this introduces fast-reboot finalizing logic to determine fast-reboot is done.
- How I did it
Added logic to finalize-warmboot script to handle fast-reboot as well, this makes sense as using fast-reboot over warm-reboot this script will be invoked. The script will clear fast-reboot entry from state-db instead of previous implementation that relied on timer. The timer could expire in some scenarios between fast-reboot finished causing fallback to cold-reboot and possible crashes.
As well this PR updates all services/scripts reading fast-reboot state-db entry to look for the updated value representing fast-reboot is active.
- How to verify it
Run fast-reboot and check that fast-reboot entry exists in state-db right after startup and being cleared as warm-reboot is finalized and not due to a timer.
#### Why I did it
When removing port from LAG while traffic is running thorough LAG there is traffic disruption of 60 seconds.
Fix issue https://github.com/sonic-net/sonic-buildimage/issues/14381
#### How I did it
The patch I added introduces "port_removing" op and call it right before Kernel is asked to remove the port.
Implement the op in LACP runner to disable the port which leads to proper LACPDU send.
#### How to verify it
Set LAG between 2 switches.
Set LAGs to be router port and set ip address.
In switch A send ping to ip address of LAG in switch B.
In switch B, while ping is running remove port from LAG.
Verify ping is not stopping.
#### Why I did it
Fix issue: wrong teamd link watch state after warm reboot due to TEAM_ATTR_PORT_CHANGED lost
The flag TEAM_ATTR_PORT_CHANGED is maintained by kernel team driver:
- a flag "changed" is maintained in struct team_port struct
- the flag is set by __team_port_change_send once relevant information is updated, including port linkup (together with speed, duplex), adding or removing
- the flag is cleared by team_nl_fill_one_port_get once the updated information has been notified to user space via RTNL
In the userspace, the change flag is maintained by libteam in struct team_port.
The team daemon calls port_priv_change_handler_func on receiving port change event.
The logic in port_priv_change_handler_func
1. creates the port if it did not exist, which triggers port add event and eventually calls lacp_port_added callback.
2. triggers port change event if team_port->changed is true, which eventually calls lw_ethtool_event_watch_port_changed to update port state for link watch ethtool.
3. removes the port if team_port->removed is removed
In lacp_port_added, it calls team_refresh to refresh ifinfo, port info, and option info from the kernel via RTNL.
In this step, port_priv_change_handler_func is called recursively.
- In the inner call, it won't get TEAM_ATTR_PORT_CHANGED flag because kernel has already notified that.
- As a result, team_port->changed flag is cleared in the libteam.
- The port change event won't be triggered from either inner or outer call of port_priv_change_handler_func.
If the port has been up when the port is being added to the team device, the "port up" information is carried in the outer call but will be lost.
In case the flag TEAM_ATTR_PORT_CHANGED is set only in the inner call, function port_priv_change_handler_func can be called in the inner call.
However, it will fail to fetch "enable" options because option_list_init has not be called.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
#### How I did it
Fix:
Do not call check_call_change_handlers when parsing RTNL function is called from another check_call_change_handlers recursively.
#### How to verify it
- Manually test
- Regression test
- warm reboot
- warm reboot sad lag
- warm reboot sad lag member
- warm reboot sad (partial)
#### Why I did it
Fixes#14277.
Fixes the inconsistent fallback behaviour for RADIUS authentication when AAA authentication is configured as "radius, local".
#### How I did it
Modified common-auth-sonic.j2 template to make sure that when no RADIUS servers are configured (with AAA authentication login method set to radius, local), the system falls back to local authentication successfully.
#### How to verify it
1. Configure authentication based on RADIUS and local.
config aaa authentication login radius local
2. Configure an unreachable RADIUS server.
config radius add 6.6.6.6
3. Try to login to switch with existing admin user credentials. This is successful.
4. Remove RADIUS server configuration.
config radius delete 6.6.6.6
5. Try to login to switch with admin user credentials. This is successful.
Based on the port breakout HLD, we are now using subport instead of channel in the CONFIG_DB PORT table to handle port breakout. The yang schema needs to be modified accordingly to handle the corresponding change.
The corresponding code changes have been merged through sonic-net/sonic-platform-daemons/pull/342 merged
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
Why I did it
Support Egress Mirroring on supported Arista platforms
How I did it
Add necessary soc properties for egress mirroring recycle ports to be created
Signed-off-by: Nathan Wolfe <nwolfe@arista.com>
Change references to use bullseye instead of buster
Why I did it
Almost all daemons in 202211 and master uses bullseye, and NAT seems easy to migrate.
How I did it
Replaced the references, built with 202211 branch.
How to verify it
Not sure, it builds and tests pass as far as I can tell but I don't use the feature myself.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Why I did it
We found a bug when pilot, the tag function doesn't remove the ACR domain when do tag, it makes the latest tag not work. And in the original tag function, it calls os.system and os.popen which are not recommend, need to refactor.
How I did it
Do a split("/") when get image_rep to fix the acr domain bug
Refactor the tag function code and add test cases
How to verify it
Check whether container images are tagged as latest when in kube mode.
Why I did it
832ef9c4 - Fix bug in GCU vlanintf_validator ([Bcm SAI] ugprade Broadcom SAI to version 3.3.5.4m-1 #2765) (5 minutes ago) [jingwenxie]
53f611b7 - Revert "Convert IPv6 addresses to lowercase in apply-patch (Add Pegatron project to branch 201807 #2299)" (Add note for running out of disk space in /var/lib/docker to README.md #2758) (20 hours ago) [jingwenxie]
79a21cef - Revert frr route check ([mlnx] fix url inconsistency in fw.mk #2761) (8 minutes ago) [StormLiangMS]
824680ed - Resolved rc!=0 problem by replacing fgrep with awk. Added ipv4 filtering to get only v4 peers in case of show ip bgp neighbors (Improve eeprom access reliability #2756) (30 hours ago) [saurabh17g]
10f31ea6 - Revert "Replace pickle by json (Add autoneg to 7170-Q59S20 #2636)" ([hostcfgd] Default value of fallthrough for authentication set to be False. #2746) (7 days ago) [Mai Bui]
05fa7513 - Fix the show interface counters throwing exception on device with no external interfaces ([docker-platform-monitor]: Add smartmontools 6.6-1 #2703) (11 days ago) [abdosi]
f27dea0c - [route_check] remove check-frr_patch mock ([minigraph]: Mark both ERSPAN and ERSPANv6 as mirror ACL tables #2732) (11 days ago) [Stepan Blyshchak]
2d95529d - Revert "Update load minigraph to load backend acl (mlnx msn2010: default config_db.json generation with sonic-cfggen is not working #2236)" (swss stretch update broke restore_neighbors.py for neigh service #2735) (12 days ago) [Neetha John]
c869c970 - (master) Update the ref guide to reflect the vlan brief output ([teamd] update teamd docker to stretch and fix teamd_init failure #2731) (2 weeks ago) [Vivek]
76457141 - Fix fast-reboot DB migration ([teamd]: update teamd docker to stretch #2734) (2 weeks ago) [Aryeh Feigin]
f7f783bc - Enhance the logic to wait for all buffer tables to be removed in _clear_qos ([sfputil] Not able to read out values of voltage/temp/power on some cables #2720) (2 weeks ago) [Stephen Sun]
e6179afa - Remove timer from FAST_REBOOT STATE_DB entry and use finalizer (Rollback kernel submodule update. #2621) (3 weeks ago) [Aryeh Feigin]
ff688323 - [route_check] fix IPv6 address handling ([docker pmon] install fancontrol & sensord #2722) (3 weeks ago) [Stepan Blyshchak]
7a604c51 - update fast-reboot ([201811][sairedis][swss] advance sub module head of sairedis and swss #2728) (3 weeks ago) [jhli-cisco]
9f83ace9 - [GCU] Add vlanintf-validator (Revert "[device/celestica] blacklist gpio_ich kernel module on haliburton" #2697) (3 weeks ago) [jingwenxie]
338d1c05 - Check SONiC dependencies before installation. ([sonic-slave]: Add iproute2 dependencies in stretch docker #2716) (3 weeks ago) [Liu Shilong]
64d2efd2 - Improve show acl commands ([sonic-utilities] update submodule #2667) (3 weeks ago) [bingwang-ms]
2ef5b31e - [GCU] Add PFC_WD RDMA validator ([sub module] advance sonic-utilities sub module for 201811 branch #2619) (3 weeks ago) [isabelmsft]
c7aa8416 - [show][muxcable] increase timeout for displaying HW_STATUS (Fixing get_transceiver_change_event #2712) (3 weeks ago) [vdahiya12]
2fc2b826 - YANG validation for ConfigDB Updates: MIRROR_SESSION use case ([mellanox] Update SDK to 4.3.0132 #2430) (3 weeks ago) [isabelmsft]
e16bdaae - Fix non-zero status exit on non secure boot system ([service] add warmboot finializer service #2715) (3 weeks ago) [kellyyeh]
90d70152 - [route_check] implement a check for FRR routes not marked offloaded (Feature to run an option platform specific script on the first boot #2531) (3 weeks ago) [Stepan Blyshchak]
c2bc150a - [warm/fast-reboot] Backup logs from tmpfs to disk during fast/warm shutdown ([swss]: update swss docker to stretch #2714) (3 weeks ago) [Vaibhav Hemant Dixit]
a015834d - [db_migrator] Add missing attribute 'weight' to route entries in APPL DB ([device/celestica] blacklist gpio_ich kernel module on seastone #2691) (4 weeks ago) [Vaibhav Hemant Dixit]
cd519aac - [ci] Fix pipeline issue caused by sonic-slave-* change. ([201803] Modify Debian apt repos to reflect changes made by maintainers #2709) (4 weeks ago) [Liu Shilong]
2680e6f3 - [dhcp_relay] Fix dhcp_relay restart error while add/del vlan ([thrift] add a patch to revert THRIFT-3650 #2688) (4 weeks ago) [Yaqiang Zhu]
How I did it
How to verify it
Why I did it
This PR is to update the check of IP_TYPE from sonic-acl.yang.
It's because if the ACL rule is added by loading a json file with acl-loader, there is no IP_TYPE for ACL rule. If such rule exists in ACL_RULE table, the GCU (generic config updater) refuses to update any ACL rules because the existing one is invalid.
This PR updates the yang model for ACL. If the IP_TYPE leaf doesn't exist, then we don't check the field.
How I did it
Accept the rule if IP_TYPE is absent.
How to verify it
The change is verified by UT.
Why I did it
We don't need to install rsync in every docker container if vcache is disabled.
How I did it
Install rsync in pre_run_buildinfo script only if vcache is enabled.
How to verify it
Why I did it
Change static route expiry timer max timeout value from 1800 to 172800.
To keep same value range as defined in sonic-restapi/sonic_api.yaml
How I did it
How to verify it
apply change to bgpcfd, restart bgp container see if the value take action.
Update sonic-py-common, add missing dependency to redis-dump-load.
#### Why I did it
The script sonic_db_dump_load.py in sonic-py-common is depends on redis-dump-load, however the dependency is missing.
#### How I did it
Add redis-dump-load dependency.
#### How to verify it
Pass all E2E test case.
#### Description for the changelog
Update sonic-py-common, add missing dependency to redis-dump-load.
Why I did it
For better accounting purposes, updating the ingress lossy traffic profile to use static threshold. This change is only intended for Th devices using RDMA-CENTRIC profiles
How I did it
Update the buffer templates for Th devices in RDMA-CENTRIC folder to use the correct threshold
How to verify it
Verified the changes manually on a Th device.
Existing unit tests render Th template from the RDMA-CENTRIC folder. Updated the expected output to use the correct threshold
- Why I did it
Update VxLAN yang model to include IPv6 source in VxLAN tunnel. The src_ip field can include both ipv4 as well as ipv6 address
- How I did it
Updated yang model.
- How to verify it
Added UT to verify
* Upgrade docker-sonic-vs and docker-syncd-vs to Bullseye
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* iproute2: Force a new version and timestamp to be used for the package
There is an issue with Docker's overlay2 storage driver when not using
native diffs (and thus falling back to naive diff mode), which is the
case in the CI builds. The way the naive diff mode detects changes is by
comparing the file size and comparing the timestamps (specifically, I
believe it's the modification timestamp), and if there's a change there,
then it's considered a change that needs to be recorded as part of that
layer.
The problem is that with the code being added in the patch, the file
size remains the same, and the timestamp of binary files appear to be
the same timestamp as the changelog entry (likely for reproducible build
purposes). The file size remains the same likely due to extra padding
within the file introduced by relro. Because of this, Docker doesn't
detect this file has changed, and doesn't save the new file as part of
this layer.
To work around this, create a new changelog entry (with a new version as
well) with a new timestamp. This will result in the binary files having
a different timestamp, and thus will get saved by Docker as part of that
layer.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
SONiC currently does not identify 'EdgeZoneAggregator' neighbor. As a result, the buffer profile attached to those interfaces uses the default cable length which could cause ingress packet drops due to insufficient headroom. Hence, there is a need to update the buffer templates to identify such neighbors and assign the same cable length as used by the T1.
How I did it
Modified the buffer template to identify EdgeZoneAggregator as a neighbor device type and assign it the same cable length as a T1/leaf router.
How to verify it
Unit tests pass, and manually checked on a 7260 to see the changes take effect.
Signed-off-by: dojha <devojha@microsoft.com>
fa8b709 Handled the error case of negative age (#57)
990f5b0 Use github code scanning instead of LGTM (#55)
a7992c5 Install libyang for swss-common. (#50)
244fa86 Update README.md
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Healthd check system status every 60 seconds. However, running checker may take several seconds. Say checker takes X seconds, healthd takes (60 + X) seconds to finish one iteration. This implementation makes sonic-mgmt test case not so stable because the value X is hard to predict and different among different platforms. This PR introduces an interval
compensation mechanism to healthd main loop.
- How I did it
Introduces an interval compensation mechanism to healthd main loop: healthd should wait (60 - X) seconds for next iteration
- How to verify it
Manual test
Unit test
Why I did it
Add interface-id in dhcpv6-relay yang model
How I did it
Add interface-id option and corresponding UT. Updated configuration.md
How to verify it
kellyyeh@kellyyeh:~/sonic-buildimage/src/sonic-yang-models$ pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-dhcpv6-relay.yang
Why I did it
Add 'channel' to the CONFIG_DB PORT table. This will be needed to support PORT breakout to multiple channel ports so that Xcvrd can understand which datapath or channel to initialize on the CMIS compliant optics
How I did it
Add 'channel' to the CONFIG_DB PORT table.
How to verify it
Added unit test for valid and invalid channel number
Channel 0 -> No breakout
Channel 1 to 8 -> Breakout channel 1,2, ..8
Signed-off-by: Prince George <prgeor@microsoft.com>
Update sonic-swss-common submodule pointer to include the following:
23df338 [ci] Continue on error when running test. (#757)
06ffb51 Define ACL_TABLE and ACL_RULE table in STATE_DB (#748)
1b369ab [ci] Fix apt-get install unable locate package issue. (#753)
619d4ec Improve unit test for go wrapper (#752)
Why I did it
After the renaming of the asic_port_name in port_config.ini file (PR: #13053 ), the asic_ifname in port_config.ini is changed from '-ASIC<asic_id>' to just port. Example: 'Eth0-ASIC0' to 'Eth0'.
However, with this change a config_db generated via config load_minigraph would cause the EVERFLOW and EVERFLOWV6 tables under ACL_TABLE to not have any of non-LAG front panel interfaces. This was causing the EVERFLOW suite to fail.
How I did it
In parse_asic_external_neigbhors in minigraph.py there was a check that the asic_name.lower() (like asic0) is present in the port_alias_asic_map. However with -ASIC removed from the asic_ifname, the port_alias_asic_map would not have the asic_name and thus any non-LAG neighbor would not be included.
Fix was the ignore the asic name change as the port_alias_asic_map is already only looking for ports in just the same asic as asic_name.
How to verify it
Execute "config load_minigraph" with the mingraph which is generated by sonic-mgmt gen-minigraph script. And confirm ono-lag interface are present in the Everfloe table in the config_dbs.
Signed-off-by: mlok <marty.lok@nokia.com>
reverted because the submodule update PR needs to be merged with the following PR
#14200 but the PR is not available due to some failures and having only sairedis PR will break fast-boot
Update sonic-swss-common submodule pointer to include the following:
565ad4b Fix common path issue (#751)
3352881 Prevent sonic-db-cli generate core dump (#749)
43cadec Add ProfileProvider class to support read profile config from PROFILE_DB. (#683)
8b09f90 Update path to sairedis tests (#747)
85f3776 Non recursive automake and Debian packaging changes (#700)
This is a reland of #13950, with the debug image build fix.
#### Why I did it
update contains following commits
50123ef Zain Budhwani Tue Feb 28 16:48:22 2023 -0800 Add logs for md5 checksum (sonic-net/sonic-gnmi#80)
a90f2b3 Zain Budhwani Mon Feb 27 23:44:49 2023 -0800 Add get-update to azp yml (sonic-net/sonic-gnmi#79)
14fe6f4 Zain Budhwani Tue Jan 31 14:11:27 2023 -0800 Add 202012 branch to pr checker (sonic-net/sonic-gnmi#72)
a792474 Zain Budhwani Tue Jan 31 09:22:38 2023 -0800 Fix crash when retrieving cpu utilization (sonic-net/sonic-gnmi#70)
#### How I did it
Fetch new changes
Why I did it
Dhcpmon had incorrect RX count for server side packets. It does not raise any false alarms, but could miss catching server side packet count mismatch between snapshot and current counter.
Add debug mode which prints counter to syslog
How I did it
Due to dualtor inbound filter requirement, there are currently two filters, each for listening to rx / tx packets.
Originally, we opened up an rx/tx socket for each interface specified, which causes duplicate socket. Now we initialize the sockets only once. Both sockets are not binded to an interface, and we use vlan to interface mapping to filter packets. For inbound uplinks, we use a portchannel to interface mapping.
Previous dhcpmon counter before dual tor change:
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
Dhcpmon counter after this PR:
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
How to verify it
Ran dhcp relay test to send all four packets in singles and batches on both single ToR and dual ToR. Counter was as expected.
Why I did it
Add yang model definition for CHASSIS_MODULE define and implemented for sonic chassis. HLD for this configuration is included in https://github.com/sonic-net/SONiC/blob/master/doc/pmon/pmon-chassis-design.md#configurationFixes#12640
How I did it
Added yang model definition, unit tests, sample config and documentation for the table
How to verify it
Validated config tree generation using "pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-voq-inband-interface.yang"
Built the below python-wheels to validate unit tests and other changes
target/python-wheels/bullseye/sonic_yang_mgmt-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_yang_models-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_config_engine-1.0-py3-none-any.whl
Why I did it
submodule advance for master branch
309df59 - Revert "[aclorch] Fixed issue [Mellanox] Update SDK to v4.2.9102 #2204.Support IN_PORTS qualifer in MIRRORV6 table. (Cmd "config vlan member add <vid> <interface_name>" always adds interface as tagged #2668)" (Add warm/fast-boot feature processing for wedge100bf_32x/65x platforms #2687) (85 minutes ago) [StormLiangMS]
ebe8de7 - [FDB]Fixing FDB consolidated flush for Remote MACs (pmon to stretch #2673) (2 days ago) [Sudharsan Dhamal Gopalarathnam]
c9ae6aa - Fix issue: there is no retry while creating a RIF which is in removing state ([201811 sub-module] advance sub-modules: utilities, swss, swss-common #2679) (2 days ago) [Junchao-Mellanox]
79afcb3 - [Dual-ToR] handle 'mux_tunnel_egress_acl' attrib in order to change ACL configuration (drop on ingress/egress) on standby ToR (lm75 doesn't support written alarm to syslog. #2646) (3 days ago) [Andriy Yurkiv]
c2b01ba - [orchagent]: Get bridge port ID from orchagent cache instead of SAI API ([201811 sub module] advance sairedis sub module #2657) (3 days ago) [Lawrence Lee]
d8a1cb7 - [dualtor] Fix neighbor miss when mux is not ready ([mellanox] Fix in mlnx-ffb.sh #2676) (3 days ago) [Longxiang Lyu]
1531dff - [ci] Fix pipeline error about team5 not found. (Core dump in orchagent when assigning router interface to a vlan with untagged mode #2684) (4 days ago) [Liu Shilong]
cfcd40c - [aclorch] Fixed issue [Mellanox] Update SDK to v4.2.9102 #2204.Support IN_PORTS qualifer in MIRRORV6 table. (Cmd "config vlan member add <vid> <interface_name>" always adds interface as tagged #2668) (4 days ago) [Rajkumar-Marvell]
35a7ab0 - swss: Fix Invalid port oid messages generated because of voq counters. (Failed to update FlexCounter, Segmentation fault #2653) (8 days ago) [Sambath Kumar Balasubramanian]
How I did it
How to verify it
run PR test
Why I did it
[Build] Support to use loosen version when failed to install python packages
It is to fix the issue #14012
How I did it
Try to use the installation command without constraint
How to verify it
Fixing issue https://github.com/sonic-net/sonic-buildimage/issues/13983
#### Why I did it
Added Missing fields in sonic-portchannel yang model.
"fallback" and "fast_rate" fields are present in configuration schema but not in yang model. This leads to traceback when yang is validated
sonic_yang(3):All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
sonic_yang(3):exceptionList:["'fast_rate'"]
sonic_yang(3):Data Loading Failed:All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
Data Loading Failed
All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
ConfigMgmt Class creation failed
Failed to break out Port. Error: Failed to load the config. Error: ConfigMgmtDPB Class creation failed
#### How I did it
Updated yang model
#### How to verify it
Added tests to verify
#### Link to config_db schema for YANG module changes
Part of the PR
Reverts #13950
libswsscommon-dbg_1.0.0_amd64.deb package is not built in new submodule HEAD.
PR validation passed because it didn't build debug image.
13950 breaks debug image build.
Why I did it
SONiC related packages shouldn't be intalled from Pypi.
It is security compliance requirement.
How I did it
Check SONiC related packages when using setup.py.
How to verify it
b8173428 - [GCU] Add Sample Unit Test for RDMA Headroom Pool Size Tuning ([device/celestica] blacklist gpio_ich kernel module on haliburton #2692) (5 hours ago) [isabelmsft]
6f84aae7 - Add begin logs to config reload/config minigraph/warm-reboot/fast-reboot (RPC syncd docker image does not start RPC server automatically #2694) (27 hours ago) [Junchao-Mellanox]
e98011f8 - Revert "Secure upgrade ([sonic-cfggen] Multi-key should be in form of (a,b) instead of 'a|b' #2337)" (Add Broadcom XLR/GTS ((BCM9COMX2XMC) support for Tomahawk switch (BCM956960K) #2675) (34 hours ago) [StormLiangMS]
eda4e91b - [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (DUT takes more than 7 seconds to finish update ip v6 neighbor #2414) (4 days ago) [vdahiya12]
54e26359 - Replace pickle by json (Add autoneg to 7170-Q59S20 #2636) (4 days ago) [Mai Bui]
Fix swsscommon psubscribe code break in frrcfgd
#### Why I did it
Fix frrcfgd psubscribe code break: https://github.com/sonic-net/sonic-buildimage/issues/13109
The code issue caused by API change when migrate from swsssdk to swsscommon
#### How I did it
Fix frrcfgd code to use swsscommon psubscribe API.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly.
Update sonic-platform-daemons submodule head to include:
05dd3bd mihirpat1 Wed Feb 22 09:19:13 2023 -0800 Update CMIS module types for 2x100G AOC support (sonic-net/sonic-platform-daemons#339)
f132d12 vdahiya12 Thu Feb 9 18:01:38 2023 -0800 [ycabled] add more coverage to ycabled; add minor name change for vendor API CLI return key-values pairs (sonic-net/sonic-platform-daemons#338)
Update sonic-platform-common submodule head to include:
85c20cd mihirpat1 Wed Feb 22 09:18:20 2023 -0800 Update host electrical interface for 2x100G AOC (sonic-net/sonic-platform-common#346)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
On SONiC VoQ chassis, the speed changes are done from 400G to 100G needs to be supported on 400G linecards.
To enable this, along with speed change the port lanes need to be changed. This PR has the changes to update the port lanes when such speed change happens.
This PR is intended only for VoQ chassis linecards. These platforms today have 400g port with 8 serdes lines, and 100g will operate with 4 serdes lane. When the port speed changes from 400G to 100G the first 4 lanes will be used for 100G port.
Platforms which support 2x50g PAM4 or support 100G PAM4 serdes or other combinations are not handled in the PR.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
To support 64 cores on arista skus. Fixesaristanetworks/sonic#77
Remapped recycle ports to lowers core port ids and set appl_param_nof_ports_per_modid to 64.
Fixes#11873.
#### Why I did it
When loading from minigraph, for port channels, don't create the members@ array in config_db in the PORTCHANNEL table. This is no longer needed or used.
In addition, when adding a port channel member from the CLI, that member doesn't get added into the members@ array, resulting in a bit of inconsistency. This gets rid of that inconsistency.
Fixes: #13395
This fix resolves ownership configuration for vcache:
Step 24/40 : RUN pip3 install j2cli
---> Running in fcc39df62a98
chown: missing operand after '/sonic/target/vcache/docker-base-bullseye'
Try 'chown --help' for more information.
Originally the issue was introduced here: #13287
- Why I did it
To fix ownership configuration
- How I did it
Removed redundant stuff
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
- Why I did it
Need to add the possibility to choose between dropping packets (using ACL) on ingress or egress in Dual ToR scenario
- How I did it
Add new attribute "mux_tunnel_ingress_acl" to SYSTEM_DEFAULTS table
- How to verify it
check that new attribute exists in redis:
admin@sonic:~$ redis-cli -n 4
127.0.0.1:6379[4]> HGETALL SYSTEM_DEFAULTS|mux_tunnel_ingress_acl
1."state"
2."false"
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Why I did it
Support to upgrade packages, do better cleanup after the build.
How I did it
Remove the no use preference version control file after the build.
How to verify it
- Why I did it
Add SONiC YANG model for DNS to provide the possibility to configure static DNS entries in Config DB.
- How I did it
Added sonic-dns.yang file that contains the YANG model for the static DNS configuration.
- How to verify it
This PR extends YANG model tests to cover DNS configuration.
To run the test sonic_yang_models-1.0-py3-none-any.whl should be compiled.
#### Why I did it
Fix an issue that services do not start automatically on first boot and start only after hostcfgd enables them.
This is due to a bug in systemd-sonic-generator:
```
admin@arc-switch1004:~$ /usr/lib/systemd/system-generators/systemd-sonic-generator dir
Failed to open file /usr/lib/systemd/system/database.servcee
Error parsing targets for database.servcee
Error parsing database.servcee
Failed to open file /usr/lib/systemd/system/bgp.servcee
Error parsing targets for bgp.servcee
Error parsing bgp.servcee
Failed to open file /usr/lib/systemd/system/lldp.servcee
Error parsing targets for lldp.servcee
Error parsing lldp.servcee
Failed to open file /usr/lib/systemd/system/swss.servcee
Error parsing targets for swss.servcee
Error parsing swss.servcee
Failed to open file /usr/lib/systemd/system/teamd.servcee
Error parsing targets for teamd.servcee
Error parsing teamd.servcee
Failed to open file /usr/lib/systemd/system/syncd.servcee
Error parsing targets for syncd.servcee
Error parsing syncd.servcee
```
A wrong file name is generated (e.g database.**servcee**).
#### How I did it
Fixed overlapping strings being passed to strcpy/strcat that receive restirct* pointers (strings should not overlap).
#### How to verify it
Perform first boot and observe services start immidiatelly after boot.
Why I did it
Fix all mirror is commented out in sources.list in slave image issue. It will have an issue when installing more packages in the slave container.
It will add additional space character after running add-apt-repository command.
For example:
The original config in /etc/apt/sources.list
#deb [arch=amd64] http://deb.debian.org/debian/ bullseye main contrib non-free
Run the following command:
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/debian bullseye stable"
Then the setting changed to: (added a new space character after #)
# deb [arch=amd64] http://deb.debian.org/debian/ bullseye main contrib non-free
How I did it
Fix the regex string to add the space pattern. After fixed, whether there is a space character or not, it will not be an issue.
How to verify it
Update sonic-platform-daemons submodule pointer to include the following:
* 906d198 add data for telemtery enhancement for 'active-active' cable type ([#332](https://github.com/sonic-net/sonic-platform-daemons/pull/332))
Signed-off-by: dprital <drorp@nvidia.com>
include sairedis changes
3a960be | [submodule][SAI]ADvance SAI Header (#1206)
7026441 | [Mellanox] Enable DSCP remapping by using SAI attribute (#1188)
a2c37b8 | [syncd]: Enable port bulk API (#1197)
include SAI changes
7710e24 | [cherry-pick][202211]Enhance the check enum lock script (#1741) (#1742)
0031470 | improve enum values integration check (#1727) (#1737)
4f11c7e | Enable github code scanning to replace LGTM. (#1709)
0fd23d2 | [SAI-PTF] Skip test when hit expected error from sai api (#1699)
aba7612 | [SAI-PTF] API Logger - reformat arg values (#1696)
1390cee | [SAI-PTF] API Logger - reformat dict in return value (#1690)
3d96a1d | [SAI-PTF]Add return value in the SAI-PTF log (#1685)
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
system-health indicates errors in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
system-health process error messages were also altered to indicate which container had the issue; multiple containers may run processes with the same name, which can result in identical system-health error messages, causing ambiguity.
How I did it
Port container_checker logic from #11442 into service_checker for system-health.
How to verify it
Bringup Supervisor card with one or more missing fabric cards. Execute 'show system-health summary'. The command should not report failure due to missing dockers for the asics on the fabric cards which are not present.
Signed-off-by: Zhixin Zhu zhixzhu@cisco.com
Why I did it
backplane ports cable length need to be specified.
How I did it
separated handling for the specific port name.
9126e7f8 Stepan Blyshchak Thu Feb 9 05:20:11 2023 +0200 [config/show] Add command to control pending FIB suppression (sonic-net/sonic-utilities#2495)
9e32962c mihirpat1 Wed Feb 8 16:39:00 2023 -0800 Add transceiver info CLI support to show output from TRANSCEIVER_INFO for ZR (sonic-net/sonic-utilities#2630)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
- Why I did it
Fix issue: ERR healthd: Get unit status determine-reboot-cause-'LoadState'. The error log is only seen on shutdown flow such as fast-reboot/warm-reboot.
In shutdown flow, 'LoadState' might not be available in systemctl status output, using [] might cause a KeyError.
- How I did it
Use dict.get instead of []
- How to verify it
Manual test
- Why I did it
Support DSCP remapping in dual ToR topo on T0 switch for SKU Mellanox-SN4600c-C64, Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8.
- How I did it
Regarding buffer settings, originally, there are two lossless PGs and queues 3, 4. In dual ToR scenario, the lossless traffic from the leaf switch to the uplink of the ToR switch can be bounced back.
To avoid PFC deadlock, we need to map the bounce-back lossless traffic to different PGs and queues. Therefore, 2 additional lossless PGs and queues are allocated on uplink ports on ToR switches.
On uplink ports, map DSCP 2/6 to TC 2/6 respectively
On downlink ports, both DSCP 2/6 are still mapped to TC 1
Buffer adjusted according to the ports information:
Mellanox-SN4600c-C64:
56 downlinks 50G + 8 uplinks 100G
Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8:
24 downlinks 50G + 8 uplinks 100G
- How to verify it
Unit test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
dplane_fpm_nl is a new FPM implementation in FRR. The old plugin fpm will not have any new features implemented. Usage of the new plugin gives us ability to use BGP suppression feature and next hop groups in the future.
How I did it
Switch to dplane_fpm_nl zebra plugin from old fpm plugin which is not supported anymore
Remove stale patches for old fpm plugin and add similar patches for dplane_fpm_nl
How to verify it
Build and run on the switch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Added YANG model as part of Generic Hash feature development
- How I did it
Added YANG model and UTs
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Update sonic-sairedis submodule pointer to include the following:
* 0434b62 [sai_failure_dump]Invoking dump during SAI failure ([#1198](https://github.com/Azure/sonic-sairedis/pull/1198))
Signed-off-by: dgsudharsan <sudharsand@nvidia.com>
Add YANG model for SYSTEM_PORT.
Resolves https://github.com/sonic-net/sonic-buildimage/issues/12458
#### Why I did it
YANG model for SYSTEM_PORT in CONFIG_DB was missing.
#### How I did it
Added new YANG model and associated unit tests.
#### How to verify it
Passing unit tests
* Add support for platform topology configuration service
This service invokes the platform plugin for platform specific topology
configuration.
The path for platform plugin script is:
/usr/share/sonic/device/$PLATFORM/plugins/config-topology.sh
If the platform plugin is not available, this service does nothing.
Signed-off-by: anamehra <anamehra@cisco.com>
[swss-common] update submodule (#13579)
```
6b6842a [NotificationProducer] add pipeline support (#708)
2cb5ea0 Increase the netlink buffer size from 3MB to 16MB. (#739)
dacbdad RedisPipeline ignore flush when call dtor from another thread. (#736)
```
issue #13395
Fix a bug about sudo failure.
/usr/local/share/buildinfo/scripts/buildinfo_base.sh: line 24: sudo: command not found
Fix an issue about warning message.
./scripts/run_with_retry: line 4: [: : integer expression expected
- Why I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How I did it
Add new ACL key BTH_OPCODE and AETH_SYNDROME
- How to verify it
manual test
unit test
Includes below commits
```
0d5e68f5a [GCU] Ignore bgpraw table in GCU operation (#2628)
22757b1f3 Add interface link-training command into the CLI doc (#2257)
f4f857e10 [GCU] Ignore bgpraw in GCU applier (#2623)
b5ac60036 [muxcable][config] Add support to enable/disable ceasing to be an advertisement interface when `radv` service is stopped (#2622)
981f9531e [chassis][voq] Add "show fabric reachability" command. (#2528)
fba87f43f Revert (#2599)
d6d7ab37f [warm-reboot] Use kexec_file_load instead of kexec_load when available (#2608)
db4683d40 fix show techsupport error (#2597)
3d8e9c62d [GCU] Prohibit removal of PFC_WD POLL_INTERVAL field (#2545)
163e766cc [techsupport] include APPL_STATE_DB dump (#2607)
8703773eb YANG Validation for ConfigDB Updates: RADIUS_SERVER (#2604)
c2d746d4f Remove TODO comment which is no longer relevant (#2600)
f09da9983 [show] Add bgpraw to show run all (#2537)
39ac5641b Extend fast-reboot STATE_DB entry timer (#2577)
```
Update sonic-platform-common submodule head to include:
38a7a65 mihirpat1 Wed Jan 25 09:49:05 2023 -0800 Change get_tx_bias return type to list (sonic-net/sonic-platform-common#342)
ecb7dde qinchuanares Sat Jan 21 11:24:37 2023 -0800 add SOP ROC in bulk status (sonic-net/sonic-platform-common#341)
Signed-off-by: Mihir Patel <patelmi@microsoft.com>
