* Add new CIG device CS6436-54P and CS5435-54P, also update code for CS6436-56P
* security kernel update to 4.9.189 for CIG devices
* security kernel update to 4.9.189 for CIG devices
* Update rules
Update rule file
update FW to xx_2000_3298
update SAI to 1.16.0
update Spectrum-1 and Spectrum-2 buffer pool size according to the new SDK default config change.
modified: ../../device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t0.j2
modified: ../../device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t1.j2
modified: ../../device/mellanox/x86_64-mlnx_msn3700-r0/ACS-MSN3700/buffers_defaults_t0.j2
modified: ../../device/mellanox/x86_64-mlnx_msn3700-r0/ACS-MSN3700/buffers_defaults_t1.j2
modified: fw.mk
modified: mlnx-sai.mk
modified: mlnx-sai/SAI-Implementation
modified: sdk-src/sx-kernel/Switch-SDK-drivers
modified: sdk.mk
signed-off by kebol@mellanox.com
Due to linux create hwmonN node number, N isn't fixed. So modify to use "" to let thermal.py can correct sysfs. For example, use /sys/bus/i2c/devices/55-0048/hwmon/hwmon/temp1_input to instead of /sys/bus/i2c/devices/55-0048/hwmon/hwmon4/temp1_input
This patch upgrade the kernel from version
4.9.0-9-2 (4.9.168-1+deb9u3) to 4.9.0-11-2 (4.9.189-3+deb9u2)
Co-authored-by: rajendra-dendukuri <47423477+rajendra-dendukuri@users.noreply.github.com>
- Fix for Azure/sonic-buildimage#4095
- Exit status from failed make command(action) didnt reached parent target because the make command is inside the "for" loop.
- Only the exit status of the last command in the last iteration of the for loop is read by parent target.
- This is the reason why dpkg-buildpackage ignored the make error.
- Fixed the issue with help of "set -e".
- Added support for Thermal event in Last Reboot Reason "show reboot-cause" command.
- Added support for sending log message in case of thermal shutdown.
sonic NOTICE root: Shutting down due to over temperature (40 degree, 30 degree, 34 degree)
* Changes in sonic-buildimage for the NAT feature
- Docker for NAT
- installing the required tools iptables and conntrack for nat
Signed-off-by: kiran.kella@broadcom.com
* Add redis-tools dependencies in the docker nat compilation
* Addressed review comments
* add natsyncd to warm-boot finalizer list
* addressed review comments
* using swsscommon.DBConnector instead of swsssdk.SonicV2Connector
* Enable NAT application in docker-sonic-vs
Implement classes IpmiSensor, IpmiFru to obtain platform sensors information for Platform2.0 APIs in DellEMC Z9264 platform.
Add a new file ipmihelper.py with the implementation for IpmiSensor, IpmiFru classes.
- move single instance services into their own folder
- generate Systemd templates for any multi-instance service files in slave.mk
- detect single or multi-instance platform in systemd-sonic-generator based on asic.conf platform specific file.
- update container hostname after creation instead of during creation (docker_image_ctl)
- run Docker containers in a network namespace if specified
- add a service to create a simulated multi-ASIC topology on the virtual switch platform
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
Signed-off-by: Suvarna Meenakshi <Suvarna.Meenaksh@microsoft.com>
- Sfp,Eeprom,Chassis(transceiver change event) support added for z9264f Platform 2.0 API
- Added Interrupt handler to SFP change event in dell_z9264f_fpga_ocores.c
- Fixed few indentation and offset issues in sfputil.py for z9264f
- Implemented fancontrol service to monitor S6000 fans and adjust fan speed w.r.t temperature.
- fancontrol.service starts the fancontrol script at startup.
- This script takes the average temperature by reading three sensors and configure FANS to appropritate RPM against the temperature.
- When the temperature is adjusted script will log in syslog for future reference.
- Also, script checks for faulty fans and report the status in syslog.
Since the syncd process running on different platforms will have the different full path names, we
change the full path name of process syncd in the monit config file such that it will be universal and is not for a specific vendor.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [MultiDB] (except ./src and ./dockers dirs): replace redis-cli with sonic-db-cli and use new DBConnector
* update comment for a potential bug
* update comment
* add TODO maker as review reqirement
* Update arista driver submodule
* Add support for 7260CX3-64E in boot0
* Refactor boot0 platform specific definition
Make it easier to manage new sku
* Add support for 7050CX3-32S in boot0
Just contains the required boot0 information
* Add basic plugin support for DCS-7050CX3-32S
* Add port config for Arista-7050CX3-32S-C32
Co-authored-by: yurypm <yurypm@arista.com>
Co-authored-by: byu343 <byu@arista.com>
* [initramfs] Updated reuired tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Updated required tools for initramfs
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [Platform] [Marvell] Platform specific debian package for et6448m device
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Removed auto-generated files
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Added mtd and uboot firmware tools package required for arm arch
Its been enabled to all arch including amd64
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [initramfs] Marvell arm modules update and platform config update
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [iniramfs] add initramfs uboot-utils hook script only for ARM
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Add a monit config file for teamd container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file in teamd container
into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for snmp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of snmp container into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for dhcp_relay container in the dir
base_image_files.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of dhcp_relay
container into base image under /etc/monit/conf.d.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a monit config file for router advertiser container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* Add a copy mechanism to put the monit config file of router advertiser
contianer into base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a monit config file for pmon container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Pmon] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a monit config file for lldp container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Add a copy mechanism to put the monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a monit config file for BGP container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Add a copy mechanism to put monit config file into the base
image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a monit config file for the swss container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Add a copy mechanism to put monit config file into the
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on barefoot
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-centec] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on centen
platform.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image on marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a monit config file for syncd container on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a monit config file for sflow container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Add a copy mechanism to put the monit conifg file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a monit config file for telemetry container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Add a copy mechanism to put the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a monit config file for database container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Add a copy mechanism to put the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change a typo.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Dhcprelay] Change the process name in monit config file to
dhcrelay.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no desserve process in syncd container on
barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process desserve in syncd container on
cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] There is no process named desserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Should not delete the process desserve in syncd container
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-arm64.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
marvell-armhf.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Delete the process dsserve in syncd container on
mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-Radv] Change the process name to radvd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Correct a typo in monit_telemetry.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the monit config file for teamd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-teamd] Delete the mechanism to copy the monit config file into
base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the monit config file for dhcp_relay
container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-dhcprelay] Delete the mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the monit config file foe radv container.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-radv] Delete the mechanism to copy the monit config file into
the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] change the monit config file for BGP container such that
monit only generates alert if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Change the monit config file for snmp container such that
monit only generates alret if the process is not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Change the monit config file for pmon container such that
monit only generates alert if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the monit config file for lldp container such that
monit only generates alerts if some processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the monit config file for pmon container since some
of processes are not running depended on the type of box.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-pmon] Delete the copy mechanism to copy the monit config file
into the base image.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Change the matching name for the process lldpd.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Change the monit config file for swss container such that
monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
barefoot such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Correct a typo in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
broadcom such that monit only generates alerts if the processes are not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
cavium such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-arm64 such that monit only generates alerts if the process is
not running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
marvell-armhf such that monit will generate alert if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Change the monit config file for syncd container on
mellanox such that monit only generates alerts if the process is not
running for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sycnd] Change the monit config file for syncd container such
that monit only generates alerts if the processes are not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Change the monit config file for sflow container such
that monit only generates alerts if the process is not running for 5
minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Change the monit config file for telemetry container
such that monit only generates alerts if the processes are not running
for 5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Change the monit config file for database container
such that monit only generates alerts if the process is not running for
5 minutes.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-database] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Use 4 spcess to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-lldp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-swss] Use 4 spaces to replace 2 space in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-sflow] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-snmp] Use 4 spaces to replace 2 spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-telemetry] Use 4 spaces to replace 2 spaces in monit config
file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on barefoot.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on broadcom.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on cavium.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on centec.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on marvell.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file
on mellanox.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-syncd] Use 4 spaces to repalce 2 spaces in the monit config file
on nephos.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
* [Docker-bgp] Remove the trailing extra spaces in monit config file.
Signed-off-by: Yong Zhao <yozhao@microsoft.com>
As part of this commit, there are a few enhancements being
made for EM policy implementation: a) Introduced hysteresis
algorithm to prevent fan hunting b) Reading ASIC temperature
to make decision for fan speed.
As part of the PR# 3599, Workaround for the boot problem
from secondary bios was addressed. When the SONiC image is
upgraded, this resulted in creating multiple entries for
BOOTX64.EFI. To fix the problem, as part of this changeset,
introducing a check to see if there is already an UEFI entry
for BOOTX64.EFI and accordingly creating / skipping the UEFI
entry.
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* [Mellanox]Update hw-mgmt to V7.0000.2308
sonic-linux-kernel should be updated accordingly with necessary patches uploaded.
* [sub-module]Advance submodule head for sonic-linux-kernel
This common utility would set next boot option as onie mode and
when reboot is triggered it would reboot the box into that specific onie mode.
Current support modes are rescue/install/uninstall
Fix the issue when an SFP module is plugged into a QSFP port via an adapter.
- How I did it
Originally the type of an SFP module is determined according to the SKU dictionary. However, it's possible that as SFP module is plugged into a QSFP port via an adapter. In this case, the EEPROM content will be parsed in the wrong format.
To address that we fetch the identifier value of an xSFP module and then get the type by parsing it.
- Updated buffers config;
- Set eth2 as CPU port;
- Added systemd service file to load bf_fpga.ko
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
* [sonic_platform.sfp] support get_transceiver_dom_threshold_info_dict
* [platform/sfp]qsfp threshold and beautify code
1. qsfp threshold: tx power
2. beautify code, removing some magic numbers
3. optimize get_present by only reading one byte.
* This method is used to update firmware components such as CPLD,FPGA,BIOS,SMF
* This uses ONIE firmware upgrade design to stage firmware update from NOS.
a) Copy latest firmware updater image to target running sonic.
b) Run “./fw-updater -u onie-firmware-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-9.bin”.
c) This would automatically reboot ONIE into update mode and update firmware components to latest and reboot back to sonic without any user intervention.
Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com>
- optoe driver truncates invalid pages(ff) but sff driver doesn't truncate.so,the DOM related calculation made by sff8436 driver will show incorrect data.
- Few optics doesn't support DOM.
- SFP plugins currently returns None for unreadable pages and this'd throw the below mentioned error in sfpshow eeprom --dom.
Add the same mechanism I developed for the SwSS service in #2845 to the syncd service. However, in order to cause the SwSS service to also exit and restart in this situation, I developed a docker-wait-any program which the SwSS service uses to wait for either the swss or syncd containers to exit.
AS7326-56X and AS7726-56X use the same design so both devices have the same problem.
The detailed description below takes AS7326-56X as the example to explain.
Original implementation:
- In platform/broadcom/sonic-platform-modules-accton/as7326-56x/service/as7326-platform-handle_mac.service,
it executes the script file "accton_handle_idt.sh".
- In "accton_handle_idt.sh", it modifies the content of the script file "/etc/init.d/opennsl-modules"
to insert the lines to execute "idt_init.sh" before the command to load broadcom linux kernel module "linux-kernel-bde.ko".
- The script "idt_init.sh" cannot be executed at the first boot of SONiC after installing SONiC under ONIE. This is the reason why all of the ports does not work.
New implementation:
- Let "as7326-platform-handle_mac.service" execute "idt_init.sh".
- Change the content of "as7326-platform-handle_mac.service" to define the service type as "oneshot". Add the settings to ensure "as7326-platform-handle_mac.service" is executed before "opennsl-modules.service".
By setting the service type as "oneshot", it is guaranteed that "opennsl-modules.services" is started only when the forked process to execute the script file "idt_init.sh" is terminated
Signed-off-by: charlie_chen <charlie_chen@edge-core.com>
Implement Watchdog platform2.0 API for DellEMC S6100 platform.
- Added new file watchdog.py in sonic_platform directory.
- Enabled API support to Enable/disable watchdog.
Implement part of the Chassis and Fan related APIs.
- Chassis APIs
get_base_mac()
get_serial_number()
get_serial_number()
get_system_eeprom_info()
get_reboot_cause()
- Fan APIs
get_direction()
get_speed()
get_target_speed()
get_speed_tolerance()
set_speed()
set_status_led()
get_target_speed()
- Fan APIs base on Device API
get_name()
get_presence()
get_model()
get_serial()
get_status()
Signed-off-by: Wirut Getbamrung wgetbumr@celestica.com
* Preemphasis values for various optics
This patch adds the preemphasis values for the various supported
optics for qfx5210 platform
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Fixed the fpga crash issue which we see in 15-20 mins time frame after onie-install. Accessing stale i2c transfer message buffer causes this crash. Te message buffer becomes stale due to race between i2c transfer and fpga interrupt handler.
This new state STATE_STOP will not be exposed for the wake up call till all the ISR of previous transfer is completed successfully.
[Makefile] Kill arm march docker service before every run to avoid stale entries
[Platform] Marvell - add dtb deb pkg
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
The following changes are done as part of this commit:
- Adding the system reboot handler
- Adding swizzle reset case for the reboot reason
- Workaround for the boot problem from Golden bios
- Adding the logging messages for platform scripts
- EEPROM parsing and library routines
[submodule]: update sonic-sairedis
1f4a1d7 2019-09-24 | Add warm boot support with removed/created port (#515) (HEAD, origin/master, origin/HEAD) [Kamil Cudnik]
59e530a 2019-09-20 | Add support for debug counters (#517) [Danny Allen]
1ed09e0 2019-09-20 | fully support bulk_remove in sairedis (#516) [Dong Zhang]
6cb1b31 2019-09-17 | Add support for port remove and port create (no warm boot) (#500) [Kamil Cudnik]
83d86ed 2019-09-17 | Fix c_str() in printf for string (#514) [Kamil Cudnik]
11b44b5 2019-09-16 | Advance SAI reference pointer to v1.5.0 (#509) [Wenda Ni]
38c6945 2019-09-14 | support sflow on virtual switch (#498) [Rakesh Datta]
e7d766e 2019-09-09 | Add acl counter match logic based on acl entry field (#511) [Kamil Cudnik]
58845ce 2019-09-06 | Add extra check for warm boot discovered RIDs (#502) [Kamil Cudnik]
b4893ef 2019-09-05 | [flex counter]: Lower the severity of log during rif counter support check (#504) [shikenghua]
b859344 2019-09-03 | fix found typo in new added syncMode related codes (#506) [Dong Zhang]
also update broadcom and mellanox SAI
* [sonic_platform]remove the handling of reset_sw_reset which indicates rebooted by software.
* [sonic_platform]Check "reset_sw_reset"
Also check reboot cause file "reset_sw_reset" which indicates the system was rebooted due to software requesting.
* Makefile: ARM kernel support from sonic-linux-kernel
* Fix for multiarch build docker spawn
Platform: Install the DTB deb for the platform
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Update driver and Add new platform API implementation for Inventec D6356
* Update Platform API (SFP)
* Update Platform API (QSFP)
* Update Platform API (FAN, THERMAL)
Signed-off-by: David Xiao <xiao.david@inventec.com>
*Currently get_firmware_version implementated by using chassis.get_firmware_version and chassis._component_name_list which are not supported in the latest sonic_platform_common, causing chassis broken. Update this part so that it aligns to the latest sonic_platform_common
*Support component API
The script sonic-gns3a.sh creates a GNS3 appliance flle, that points to a sonin-vs.img (SONiC Virtual Switch).
The appliance file (and sonic-vs.img file) can subsequently be imported into a GNS3 simulation environment.
Adjust the SDK makefiles so that it reflects the dependencies among libraries in SDK 4.3.2104.
This is a supplement of PR [Mellanox]Update SDK(4.3.2104), SAI-Implementation(1.15) and firmware 2162. It doesn't impact the sonic-mellanox.bin image but makes the future SDK-integration easier.
* Remove the divide by 4 operation to the under the hood SAI
This is to avoid the need and thus the confusion for application program to know
the mmu internal architecture
This change must have support from SAI change to reach the correct
config
Signed-off-by: Wenda <wenni@microsoft.com>
* Relegate the divide by 4 operation to the under the hood SAI for egress
lossless pool
Extend to 7060 and 6100
Signed-off-by: Wenda <wenni@microsoft.com>
* Add more TH/TH2 hwskus
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Update config test
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Add TH2 ingress lossy profile
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Move the divide by 4 operation to SAI internal
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* [bcm SAI] Upgrade Broadcom SAI to version 3.5.3.1-15
- Broadcom SAI 3.5 GA release 20190924.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
slave.mk: add SONIC_PLATFORM_API_PY2 as dependency of host
sonic_debian_extension.j2: install sonic_daemon_base and Mellanox-specific sonic_platform on host
mlnx-platform-api.mk: export mlnx_platform_api_py2_wheel_path for sonic_debian_extension.j2
sonic-daemon-base.mk: export daemon_base_py2_wheel_path for sonic_debian_extension.j2
daemon_base.py: hind unnecessary dependency of swss_common on host
Introduce a new "sflow" container (if ENABLE_SFLOW is set). The new docker will include:
hsflowd : host-sflow based daemon is the sFlow agent
psample : Built from libpsample repository. Useful in debugging sampled packets/groups.
sflowtool : Locally dump sflow samples (e.g. with a in-unit collector)
In case of SONiC-VS, enable psample & act_sample kernel modules.
VS' syncd needs iproute2=4.20.0-2~bpo9+1 & libcap2-bin=1:2.25-1 to support tc-sample
tc-syncd is provided as a convenience tool for debugging (e.g. tc-syncd filter show ...)
* Use dot1p to tc mapping for backend switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for
storage switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Adding platform support for Juniper QFX5210
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* [Juniper][QFX5210] Optoe driver for SFP management
This commit implements the following changes
- Moving to optoe driver for sfp management
- Removing the old sfp driver
- Updating the port-config.ini to add the index field
- Correction in sfputil.py to incorporate optoe driver
- Platform support for 'poweroff' command
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Implemented remaining APIs in s6100,z9100,s6000
Removed soft link in s6100,s6000,z9100 and implemented seperately
Implemented get_transceiver_change_event in S6000
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
optimize SFP module operations and fix issues.
- split initialization of variant categories of devices and initialize each category of devices only when needed, so that unnecessary dependencies can be avoided.
- update watchdog logic, only initializing watchdog when referenced.
- support platform.py and enable to initialize variant devices on a host/docker basis
- update init so that sonic_platform can be imported as a whole.
- Improve smbus reliability for all platforms
- Delay processing of the reboot cause to reduce critical path
- Add support of get_change_event for PSUs
* Change psu driver to comfort to lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Duplicate fan attributes with naming conforming to lm-sensors.
Replace psu drivers.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Revise cpr_4011_4mxx.c to support lm-sensors.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [DELL][Z9100,S6100,S6000] Platform 2.0 SFP Changes
Added support in sfp.py file which will be generic. Send the eeprom path and sfp_control path from chassis.py
* fix sfpd initialize issue
* fix review comments
* rephrase the output log
* fix retry counter
* change the retry time to 10, means set max waiting time 1024s
* fix mlnx-sfpd init flow with new solution
* [mlnx-sfpd] address comments
1. wait for 5 seconds * 30 times, 150 seconds totally. use constant wait time for each retry.
2. use try/except structure so that error can be handled in a graceful way
* [mlnx-sfpd] wait 5 seconds after SDK_DAEMON_READY_FILE exists to make sure SDK is fully up.
* [mlnx-sfpd]simplify initialization by using deinitialize on initializing failure
This switch has 27 fiber ports, 4x25G, 20x10G , and 3x100G ports ports.
CPU: Intel ® Atom™ Processor C3508,1.6GHz
BMC: None
MAC: Broadcom BCM88470 (Qumran AX).
MISC: Support IEEE1588v2, hot-swappable PSU, hot-swappable fan tray.
But notice here, BCM88470 is not supported for SAI now.
So the syncd container is not running so far.
Signed-off-by: roy_lee <roy_lee@accton.com>
Add fan control for as7116-54x
Modify sfputil.py to support sfp insert and remove events for as7116-54x
Modify port_config.nps to set port default admin down
Modify port_config.ini for add speed attr
Code format optimization like remove newline
Modify buffers_defaults_t0 and t1, change ingress_lossless_pool mode from dynamic to static
Add nephos_dac.nps and nephos_opt.nps for support difference dac and fiber module
* [Makefile/slave docker] ARM arch doesn't support few packages
iproute2 is missing for ARM sonic-slave docker
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Add platform support for delta ag9032v2a
CPU: Broadwell-DE
ASIC: BMC56870 with <100Gx32 + 10Gx1>
BMC: AST2520:
- What I did
add the new platform of delta ag9032v2a
- How I did it
1.provide the QSFP and SWPLD attributes and create the virtual buses of I2C
2. provide the port configuration
- How to verify it
1. psuutil.py
2. sfputil.py
3. bcmcd
- Known issue
The port LED is not ready. We noticed that BCM chip had the M0 FW initialization issue while bringing up SDK with "BRCM SAI ver: [3.5.2.3], OCP SAI ver: [1.4], SDK ver: [6.5.14]" and here is the information :
root@sonic:/home/admin# bcmcmd "M0 status"
M0 status
0:soc_iproc_data_send_wait: No response for msg 2
M0 FW is NOT Running
M0 FW Version is 0.0
Host FW Version is 1.0
Host and M0 FW Versions do not match!!!
Signed-off-by: hans-tseng <hans.tseng@deltaww.com>
I2c burst read may failed due to misoperation of ir3570a(A DC-to-DC converter IC).
As #2966, there are 3 more models have this symptom, as7326-56x, as7726-32x, and as9716-32d.
Also correct typo of naming on as7816-64x and as7716-32x.
Signed-off-by: roy_lee roy_lee@accton.com
What I did
Disabling i2c function of ir3570a which may failed i2c tranfer to others.
Close channel of mux after data transfered.
How I did it
Identify version of ir3570, if it's ir3570a, disable its alias i2c address.
Enable parameter of driver i2c_mux_pca954x to close channel on after every access.
How to verify it
Write 08 to offset 0xcf of systom eeprom and execute i2c block read.
It will return error.
plug-in several transceivers and run "show interfaces transceiver presence" and "sfputil show presence". You may see the different result. (But doing this requires updated xcvrd).
Signed-off-by: roy_lee <roy_lee@accton.com>
- What I did
Move the enabling of Systemd services from sonic_debian_extension to a new systemd generator
- How I did it
Create a new systemd generator to manually create symlinks to enable systemd services
Add rules/Makefile to build generator
Add services to be enabled to /etc/sonic/generated_services.conf to be read by the generator at boot time
Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
* [Mellanox]refractor the sfp event change notification logic for new platform api
remove the standalong daemon which is in charge of polling sfp change event through sdk interface
and move the polling stuff to the event in the chassis daemon.
* rephase some comment
* fix typo in sfp_event.sfp_event.initialize
ARM Architecture support in SONIC
make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH]
SONIC_ARCH: default amd64
armhf - arm32bit
arm64 - arm64bit
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Added Reboot Reason for S6000 in platform 2.0
Fixed issue in process-reboot-cause
Added package uninstall code in platform de-init code for z9100, s6100
- How I did it
-> Added support for S6000 Reboot Reason
-> Added platform.py for all platforms
-> Verified show reboot-cause command with the code changes. Added UT logs with show reboot-cause
-> Modified process-reboot-cause service to start after pmon.service. In S6000, we have to wait for nvram to be loaded.
-> If reboot-cause service starts before pmon.service, show reboot-cause is showing incorrect reason.
-> Bug fix in process-reboot-cause file
- import sonic_platform
+ import sonic_platform.platform
* [as5712-54x]
Verified with index from 1.
Add qsfp_event() for command "show interaface trancerver".
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as6712-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7726-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7712-32x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5812-54x]
Add default port speed.
Verified with index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5712-54x]
Update port-config with 1-based index.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as5812-54x]
Somehow the service may block, use type=simple to work-around.
Add syslog function for monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7716-32x]
Update port-config with 1-based index.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7816-64x]
Update port-config with 1-based index.
Implement sfputil change_event.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7326-56x]
Update port-config with 1-based index.
Implement sfputil change_event.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Remove debug code.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [as7312-54x]
Update port-config with 1-based index and default port speed.
Signed-off-by: roy_lee <roy_lee@accton.com>
The following commit addresses the graceful unmounting of file
system and graceful shutdown of dockers before calling a
cold reboot which will cause a power cycle of SSD. This ensures
orderly shutdown and no corruption of files systems because
of the power cycle to SSD.
This commit will use the existing systemd-reboot service scripts
and override the configuration to do cold reboot for S6100 and
Z9100.
Unit tested the fix and graceful shutdown of file system and
dockers are done with cold reboot.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
* support new platform api, thermal and psu part
for psu, all APIs are supported.
for thermal, we support
get_temperature,
get_high_threshold
for the thermal sensors of cpu core, cpu pack, psu and sfp module
and get_temperature for the ambient thermal sensors around the asic, port, fan, comex and board.
* 1. address review comments
2. improve the handling of PSU inserting/removal
3. tolerance diverse psu thermal sensor file name conventions
* 1. adjust thermal code according to the latest version of hw-management
2. check power_good_status rather than whether file existing ahead of reading voltage, current and power of PSU
* [devices]: Add a new supported device DellEMC s5232f
* Switch Vendor: DellEMC
* Switch SKU: s5232F
* ASIC Vendor: Broadcom
* Swich ASIC: Trident3
* Port Configuration: 32x100G
* SONiC Image: sonic-broadcom.bin
* LED support for s5232f
* Changes Include ipmitool implementation for platform_sensors script is inclued in pmon startup
* Added 100G,25G,10G configruation ( 100G is default).
* s5232[device] PSU detecttion and default led state support
* Add driver and util for peripherals of as7312-54xs, most are copied from as7312-54s.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add default port speed and index from 1.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Update i2c addr of psus.
Add system logging for monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct syntax of module_dirs.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Validate sfputil after tested.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct the index of eeprom mapping.
Signed-off-by: roy_lee <roy_lee@accton.com>
Integrating official Mellanox SDK/FW release as a pre condition for getting new Mellanox SAI release with hash changes (inner field) and 3k VXLAN scale. As well as bug fix for Spectrum LP mode and Spectrum 2 PFC WD
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
* fix the memory leak in on_pmpe. objects created via sx_api having convention new_<type_name> should be release explicitly via delete_<type_name>.
* avoid duplicate code.
Variables SFP_VLOT_OFFSET and QSFP_VLOT_OFFSET containing the typo are originally defined in repo sonic-platform-common. The typo has been fixed in PR #33. However, some Mellanox-specific code hasn't updated correspondingly, which results in xcvrd fail to start.
This PR updates the variable name in Mellanox-specific code correspondingly to fix that.
* new platform api, chassis part
* Inject mlnx mlx libs to platform monitor
* address the review comments
* remove some confusing naming.
* Adjust the minor cause to a more human-readable way when rebooted by firmware
* address review comments
* expose host dir /host/reboot-cause to pmon docker so that the reboot causing by user command can be identified
* 1. Revert "expose host dir /host/reboot-cause to pmon docker so that the reboot causing by user command can be identified"
Since the only hardware-causing reboot should be handled by get_reboot_cause and the logic of handling reboot cause is about to move to the host side, no need to mount this dir to pmon docker.
This reverts commit 3feb96869d.
2. adjust log output by using sonic_daemon_base.daemon_base.Logger.
3. remove the logic of verifying /host/reboot-cause/ files.
4. fix typo.
* implement get_firmware_version and adjust the interfaces regarding components' version retrieving according to the Azure/sonic-platform-common#34
* Switch Vendor: DellEMC
* Switch SKU: s5232F
* ASIC Vendor: Broadcom
* Swich ASIC: Trident3
* Port Configuration: 32x100G
* SONiC Image: sonic-broadcom.bin
* LED support for s5232f
* Changes Include ipmitool implementation for platform_sensors script is inclued in pmon startup
* Added 100G,25G,10G configruation ( 100G is default).
- What I did
Added Daemon to Log LPC bus degradation in Intel C2000 processor. Intel Rangeley C2000 processors with revision less than or equal to 2 have issue where LPC bus degrades over time in some processors. To identify the problem and to notify the issue, a daemon has been added which will log on encountering the issue.
- How I did it
Added a daemon which validates the CPLD scratch(0x102) and SMF scratch(0x202) registers by writing and reading values on regular polling intervals (300 seconds). If there is a discrepancy between read and write, a critical log will be thrown.
- How to verify it
The infra is verify by simulating the issue where between write and read, the value in register is modified and the log appearance is checked.
- Description for the changelog
Added Daemon to identify LPC bus degradation issue and notify using syslog in Dell S6100 and Z9100 platforms. This daemon will only run on processors with revision less than or equal to 2.
* Update sonic-quagga submodule
* Port some patches from sonic-quagga
* Fix Makefile
* Another patch
* Uncomment bgp test
* Downport Nikos's patch
* Add a patch to alleviate the vendor issue
* use patch instead of stg
- create a dockerfile-marcros.j2 file with all common operations
written as j2 macro
- use single dockerfile instruction for COPY and RUN commands
when possible to improve build time
- reorganize dockerfile instructions to make more cache friendly
(in case someday we will remove --no-cache to build docker images)
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
- What I did
During boot/reload time, wait in a loop to check for bcm initialization.
Break the loop, once sdk is ready to process the 'bcmcmd' request (or) loop count reached the maximum value.
- How I did it
In the existing implementation during syncd start process will sleep for a fixed time (3 secs)
for sdk initialization to happen. But the time taken for sdk initialization is varying for different platforms.
To fix this issue, the syncd start process wait in a loop and check whether sdk is ready to process 'bcmcmd' command.
- How to verify it
Check for syncd process status and interface status.
Check for syslogs and no failures related to syncd should be present.
* [submodule] update sonic-linux-kernel
* update linux kernel version
* Fix many version strings
* update mellanox components (built with new kernel)
* [mlnx] add make files for SDK WJH libs
* Update arista driver submodule (#8)
Make the debian packaging point to a newer kernel version.
* Updated Makefile infrastructure to build debug images.
As a sample, platform/broadcom/docker-orchagent-brcm.mk is updated to add a docker-orchagent-brcm-dbg.gz target.
Now "BLDENV=stretch make target/docker-orchagent-brcm-dbg.gz" will build the debug image.
NOTE: If you don't specify NOSTRETcH=1, it implicitly calls "make stretch", which builds all stretch targets and that would include debug dockers too.
This debug image can be used in any linux box to inspect core file. If your module's external dependency can be suitably mocked, you my even manually run it inside.
"docker run -it --entrypoint=/bin/bash e47a8fb8ed38"
You may map the core file path to this docker run.
* Dropped the regular binary using DBG_PACKAGES and a small name change to help readability.
* Tweaked the changes to retain the existing behavior w.r.t INSTALL_DEBUG_TOOLS=y.
When this change ('building debug docker image transparently') is extended to all dockers, this flag would become redundant. Yet, there can be some test based use cases that rely on this flag.
Until after all the dockers gets their debug images by default and we switch all use cases of this flag to use the newly built debug images, we need to maintain the existing behavior.
* 1) slave.mk - Dropped unused Docker build args
2) Debug template builder: renamed build_dbg_j2.sh to build_debug_docker_j2.sh
3) Dropped insignifcant statement CMD from debug Docker file, as base docker has Entrypoint.
* Reverted some changes, per review comments.
"User, uid, guid, frr-uid & frr-guid" are required for all docker images, with exception of debug images.
* Get in sync with the new update that filters out dockers to be built (SONIC_STRETCH_DOCKERS_FOR_INSTALLERS) and build debug-dockers only for those to be built and debug target is available.
* Mkae a template for each target that can be shared by all platforms.
Where needed a platform entry can override the template.
This avoids duplication, hence easier to maintain.
* A small change, that can fit better with other targets too.
Just take the platform code and do the rest in template.
* Extended debug to all stretch based docker images
* 1) Combined all orchagent makefiles into one platform independent make under rules/docker-orchagent.mk
2) Extened debug image to all stretch dockers
* Changes per review comments:
1) Dropped LIBSAIREDIS_DBG from database, teamd, router-advertiser, telemetry, and platform-monitor docker*.mk files from _DBG_DEPENDS list
2) W.r.t docker make for syncd, moved DEPENDS from template to specific makefile and let the template has stuff that is applicable to all.
* 1) Corrected a copy/paste mistake
* Fixed a copy/paste bug
* The base syncd dockers follow a template, which defines the base docker as DOCKER_SYNCD_BASE instead of DOCKER_SYNCD_<platform code>. Fix the docker-syncd-<mlnx, bfn>.mk to use the new one.
[Yet to be tested locally]
* Fixed spelling mistake
* Enable build of dbg-sonic-broadcom.bin, which uses dbg-dockers in place of regular dockers, for dockers that build debug version. For dockers that do not build debug version, it uses the regular docker.
This debug bin is installable and usable in a DUT, just like a regular bin.
* Per review comments:
1) Share a single rule for final image for normal & debug flavors (e.g. sonic-broadcom.bin & sonic-broadcom-dbg.bin)
2) Put dbg as suffix in final image name.
3) Compared target/sonic-broadcom.bin.logs with & w/o fix to verify integrity of sonic-broadcom.bin
4) Compared target/sonic-broadcom.bin.logs with sonic-broadcom-dbg.bin.log for verification
This fix takes care of ONIE image only. The next PR will cover the rest.
The next PR, will also make debug image conditional with flag.
* Updated per comments.
Now that debug dockers are available, do not need a way to install debug symbols in regular dockers.
With this commit, when INSTALL_DEBUG_TOOLS=y is set, it builds debug dockers (for dockers that enable debug build) and the final image uses debug dockers. For dockers that do not enable debug build, regular dockers get used in the final image.
Note:
The debug dockers are explicitly named as <docker name>-dbg.gz. But there is no "-dbg" suffix for image.
Hence if you make two runs with and w/o INSTALL_DEBUG_TOOLS=y, you have complete set of regular dockers + debug dockers. But the image gets overwritten.
Hence if both regular & debug images are needed, make two runs, as one with INSTALL_DEBUG_TOOLS=y and one w/o. Make sure to copy/rename the final image, before making the second run.
These patches add support for the Broadcom XMC card (XLR/GTS). At this moment
only Tomahawk switch (BCM956960K) is supported. Add
device/broadcom/x86_64-bcm_xlr-r0 and
platform/broadcom/sonic-platform-modules-brcm-xlr-gts files
* Add new device accton_as5812_54x.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rename 5812's config.bcm.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change fan module to support lm-sensors.
Validate for thermal policy.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add bask reset and lpmode control of 6 QSFP ports.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Get currect duty of fan for comparing. Instead of by stored duty from previous iteration.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Roll back the mistakes to update mellanox submodules.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Rollback for misoperation on submodule platform/p4/SAI-P4-BM.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Change indexes of ports to start from 1, as them on the front panel.
Add low-power mode control of the transciever's eeprom, follows SFF-8436.
Signed-off-by: roy_lee <roy_lee@accton.com>
Since we move to FRR, we need to connect FRR with fpmsyncd via FPM.
Adding static routes is also required.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
* Add boot0 support for the 7280CR3
* Add platform and plugins for 7280CR3
* Add port config for 7280CR3
* Add platform_reboot for 7280CR3
* Add support for 7280CR3-32D4 based on the 7280CR3-32P4
* Update arista driver submodules
- Introduce new 7280CR3-32P4
- Improve to the led plugin for OSFP
* [mlnx] fix mlnx-sfpd shutdown
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
* fix type and handle only EINTR and EAGAIN errors from select
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
* handle select.error as well during init/run
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
- Update README.md
- Improve reboot cause reporting on all platform
- Refactor parts of the library toward sonic_platform API support
- Add abstraction for fans
- Export consistent sysfs entries for fan airflow direction
- Bootstrap python testing of the driver library.
- Fix miscellaneous bugs
* [platform/cel] Implement FAN APIs based on the new platform API
* [platform/cel] Move platform api to under device platform
* [platform/cel] Remove rule to build platform api python wheel
* catch signal SIGINT and SIGTERM to set all fans full-speed before end fan monitor.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Add fan_control monitor for as7816-64x.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Fix typo.
Signed-off-by: roy_lee <roy_lee@accton.com>
* Correct typo and duty setting after verified.
Signed-off-by: roy_lee <roy_lee@accton.com>
* [frr]: change frr as default sonic routing stack
* fix quagga configuration
* [vstest]: fix bgp test for frr
* [vstest]: skip bgp/test_invalid_nexthop.py for frr
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Add bridge-utils to orchagent image
- Add vxlanmgrd to supervisorctl in docker -orchagent
Signed-off-by: Ze Gan zegan@microsoft.com
* Update submodule pointer for swss to include Vxlanmgrd changes
The base syncd dockers follow a template, which defines the base docker as DOCKER_SYNCD_BASE instead of DOCKER_SYNCD_. Fix the docker-syncd-<mlnx, bfn>.mk to use the new one.
This service (weekly) will let SSD firmware to do the garbage collection
after file-system deleted files. It could avoid slowness or
even READ-ONLY error due to SSD not being able to free the pages
even though the file system thinks there was a lot of space left.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Overall goal: Build debug images for every stretch docker.
An earlier PR (#2789) made the first cut, by transforming broadcom/orchagent to build target/docker-orhagent-dbg.gz.
Changes in this PR:
Made docker-orchagent build to be platform independent.
1.1) Created rules/docker_orchagent.mk
1.2) Removed platform//docker-orchagent-*.mk
1.3) Removed the corresponding entry from platform//rules.mk
Extended the debug docker image build to stretch based syncd dockers.
2.1) For now, only mellanox & barefoot are stretch based.
2.2) All the common variable definitions are put in one place platform/template/docker-syncd-base.mk
2.3) platform/[mellanox, bfn]/docker-syncd-[mlnx, bfn].mk are updated as detailed below.
2.3.1) Set platform code and include template base file
2.3.2) Add the dependencies & debug dependencies and any update over what base template offers.
Extended all stretch based non-platform dockers to build debug dockers too.
3.1) Affected are:
docker-database.mk,
docker-platform-monitor.mk,
docker-router-advertiser.mk,
docker-teamd.mk,
docker-telemetry.mk
Next: Build debug flavor of final images with regular dockers replaced with debug dockers where available.
* Add new device CIG CS6436-56P
* Delete minigraph.xml
It isn't necessary in the current system, just delete it
* Update qos.json.j2
* Update port_config.ini
Add the speed column. The cmd to show interface status as:
root@switch1:~# show interface status
Interface Lanes Speed MTU Alias Oper Admin Type Asym PFC
----------- --------------- ------- ----- ------------ ------ ------- ------ ----------
Ethernet0 8 25G 9100 Ethernet1/1 up up SFP N/A
Ethernet1 9 25G 9100 Ethernet2/1 up up SFP N/A
Ethernet2 10 25G 9100 Ethernet3/1 down down N/A N/A
Ethernet3 11 25G 9100 Ethernet4/1 down down N/A N/A
Ethernet4 12 25G 9100 Ethernet5/1 down down N/A N/A
Ethernet5 13 25G 9100 Ethernet6/1 down down N/A N/A
Ethernet6 14 25G 9100 Ethernet7/1 down down N/A N/A
Ethernet7 15 25G 9100 Ethernet8/1 down down N/A N/A
Ethernet8 16 25G 9100 Ethernet9/1 down down N/A N/A
Ethernet9 17 25G 9100 Ethernet10/1 down down N/A N/A
Ethernet10 18 25G 9100 Ethernet11/1 down down N/A N/A
Ethernet11 19 25G 9100 Ethernet12/1 down down N/A N/A
Ethernet12 20 25G 9100 Ethernet13/1 down down N/A N/A
Ethernet13 21 25G 9100 Ethernet14/1 down down N/A N/A
Ethernet14 22 25G 9100 Ethernet15/1 down down N/A N/A
Ethernet15 23 25G 9100 Ethernet16/1 down down N/A N/A
Ethernet16 32 25G 9100 Ethernet17/1 down down N/A N/A
Ethernet17 33 25G 9100 Ethernet18/1 down down N/A N/A
Ethernet18 34 25G 9100 Ethernet19/1 down down N/A N/A
Ethernet19 35 25G 9100 Ethernet20/1 down down N/A N/A
Ethernet20 40 25G 9100 Ethernet21/1 down down N/A N/A
Ethernet21 41 25G 9100 Ethernet22/1 down down N/A N/A
Ethernet22 42 25G 9100 Ethernet23/1 down down N/A N/A
Ethernet23 43 25G 9100 Ethernet24/1 down down N/A N/A
Ethernet24 48 25G 9100 Ethernet25/1 down down N/A N/A
Ethernet25 49 25G 9100 Ethernet26/1 down down N/A N/A
Ethernet26 50 25G 9100 Ethernet27/1 down down N/A N/A
Ethernet27 51 25G 9100 Ethernet28/1 down down N/A N/A
Ethernet28 56 25G 9100 Ethernet29/1 down down N/A N/A
Ethernet29 57 25G 9100 Ethernet30/1 down down N/A N/A
Ethernet30 58 25G 9100 Ethernet31/1 down down N/A N/A
Ethernet31 59 25G 9100 Ethernet32/1 down down N/A N/A
Ethernet32 64 25G 9100 Ethernet33/1 down down N/A N/A
Ethernet33 65 25G 9100 Ethernet34/1 down down N/A N/A
Ethernet34 66 25G 9100 Ethernet35/1 down down N/A N/A
Ethernet35 67 25G 9100 Ethernet36/1 down down N/A N/A
Ethernet36 68 25G 9100 Ethernet37/1 down down N/A N/A
Ethernet37 69 25G 9100 Ethernet38/1 down down N/A N/A
Ethernet38 70 25G 9100 Ethernet39/1 down down N/A N/A
Ethernet39 71 25G 9100 Ethernet40/1 down down N/A N/A
Ethernet40 72 25G 9100 Ethernet41/1 down down N/A N/A
Ethernet41 73 25G 9100 Ethernet42/1 down down N/A N/A
Ethernet42 74 25G 9100 Ethernet43/1 down down N/A N/A
Ethernet43 75 25G 9100 Ethernet44/1 down down N/A N/A
Ethernet44 76 25G 9100 Ethernet45/1 down down N/A N/A
Ethernet45 77 25G 9100 Ethernet46/1 down down N/A N/A
Ethernet46 78 25G 9100 Ethernet47/1 down down N/A N/A
Ethernet47 79 25G 9100 Ethernet48/1 down down N/A N/A
Ethernet48 84,85,86,87 100G 9100 Ethernet49/1 up up QSFP28 N/A
Ethernet49 80,81,82,83 100G 9100 Ethernet50/1 up up QSFP28 N/A
Ethernet50 92,93,94,95 100G 9100 Ethernet51/1 down down N/A N/A
Ethernet51 88,89,90,91 100G 9100 Ethernet52/1 down down N/A N/A
Ethernet52 108,109,110,111 100G 9100 Ethernet53/1 down down N/A N/A
Ethernet53 104,105,106,107 100G 9100 Ethernet54/1 down down N/A N/A
Ethernet54 116,117,118,119 100G 9100 Ethernet55/1 down down N/A N/A
Ethernet55 112,113,114,115 100G 9100 Ethernet56/1 down down N/A N/A
root@switch1:~#
* Updated Makefile infrastructure to build debug images.
As a sample, platform/broadcom/docker-orchagent-brcm.mk is updated to add a docker-orchagent-brcm-dbg.gz target.
Now "BLDENV=stretch make target/docker-orchagent-brcm-dbg.gz" will build the debug image.
This debug image can be used in any linux box to inspect core file. If your module's external dependency can be suitably mocked, you my even manually run it inside.
"docker run -it --entrypoint=/bin/bash e47a8fb8ed38"
You may map the core file path to this docker run.
* Dropped the regular binary using DBG_PACKAGES and a small name change to help readability.
* Tweaked the changes to retain the existing behavior w.r.t INSTALL_DEBUG_TOOLS=y.
When this change ('building debug docker image transparently') is extended to all dockers, this flag would become redundant. Yet, there can be some test based use cases that rely on this flag.
Until after all the dockers gets their debug images by default and we switch all use cases of this flag to use the newly built debug images, we need to maintain the existing behavior.
Fixes "No ISSU version file found /etc/mlnx/issu-version"
when rebooting to different image;
Add aditional check condition.
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
[devices] add new accton platform minipack.
Add support for new platform, minipack.
It has
CPU: Broadwell DE – D1527
MAC: Tomahawk3(BCM56980).
PHY:Broadcom BCM81724, 4 pcs, Gearbox for PIM-16Q
BMC:AST2520
8 hot-swappable Port-Interface-Modules, each of them has 16*100G QSFP.
- What I did
Add device and platform files for minipack.
- How I did it
Add as SONiC Porting Guide.
- How to verify it
decode-syseeprom
sensors
psuutil
sfputil
thermal monitor
bcmsh on port status
(port LEDs may not working)
- Why it is required
since SONiC master switches ifupdown package to the new implementation (ifupdown2), it is required to change the configuration of a platform-specific interface for wedge100bf_32x and wedge100bf_65x platforms (bc of ifupdown2 doesn't support auto mode for inet6 protocol).
Also, need to make some refactoring and remove if platform == smth then.. from the system level scripts.
- What I did
removed customization of /usr/bin/interfaces-config.sh
explicitly created directory /etc/network/interfaces.d
added "source" to the /etc/network/interfaces generation template (to include platform-specific interfaces processing)
added platform-specific interfaces config itself (for wedge100bf_32x and wedge100bf_65x)
fixed testcase in sonic-config-engine
- How to verify it
build image for wedge100bf_32x
perform sudo config reload -y on new installation
check the correct configuration of usb0 interface
- Description for the changelog
Allow configuration of platform-specific interfaces
* [build]: put stretch debian packages under target/debs/stretch/
* in stretch build phase, all debian packages built in that stage are placed under target/debs/stretch directory.
* for python-based debian packages, since they are really the same for jessie and stretch, they are placed under target/python-debs directory.
Signed-off-by: Guohan Lu <gulv@microsoft.com>
dell_ich module fails to load sometimes due to the failure of pci_get_drvdata().
This function is responsible for fetching INTEL PCI related memory handle in kernel. This is implemented in lpc_ich kernel module.
Due to race in addition/deletion of kernel modules, sometimes lpc_ich loads after dell_ich.
Because of this behaviour dell_ich module fails to load.
Fixed by addding dependency between modules.
Removed i2c_mux_gpio module from blacklist entry as it is not the original root case of this issue.
- Include helix4 fix.
- Include support for TD2 56854.
- Add dummy support for SAI_PORT_ATTR_ADVERTISED_SPEED.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [security kernel] Upgrade kernel from 4.9.110-3+deb9u2 to 4.9.110-3+deb9u6
short version: 4.9.0-7 to 4.9.0-8
See changelogs for security fixes:
https://tracker.debian.org/media/packages/l/linux/changelog-4.9.110-3deb9u6
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update sonic-linux-kernel submodule after it was merged
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
knet driver unload takes about 30 seconds to remove netdevs. This cuts
into our warm reboot time budget.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
