[build]: Sonic installer script for armhf (#3303)
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
This commit is contained in:
arheneus@marvell.com
lguohan
parent
11258e5db4
commit
23a3faf3f9
12
README.md
12
README.md
@ -88,15 +88,23 @@ To build SONiC installer image and docker images, run the following commands:
|
||||
|
||||
## Usage for ARM Architecture
|
||||
To build Arm32 bit for (ARMHF) plaform
|
||||
ARM build has dependency in docker version 18,
|
||||
if docker version is 19, downgrade to 18 as below
|
||||
sudo apt-get install --allow-downgrades -y docker-ce=5:18.09.0~3-0~ubuntu-xenial
|
||||
sudo apt-get install --allow-downgrades -y docker-ce-cli=5:18.09.0~3-0~ubuntu-xenial
|
||||
|
||||
# Execute make configure once to configure ASIC and ARCH
|
||||
|
||||
make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=armhf
|
||||
|
||||
**example**:
|
||||
make target/sonic-[ASIC_VENDER]-armhf.bin
|
||||
|
||||
# example:
|
||||
|
||||
make configure PLATFORM=marvell-armhf PLATFORM_ARCH=armhf
|
||||
|
||||
make target/sonic-marvell-armhf.bin
|
||||
|
||||
|
||||
|
||||
To build Arm64 bit for plaform
|
||||
@ -105,7 +113,7 @@ To build Arm64 bit for plaform
|
||||
|
||||
make configure PLATFORM=[ASIC_VENDOR] PLATFORM_ARCH=arm64
|
||||
|
||||
**example**:
|
||||
# example:
|
||||
|
||||
make configure PLATFORM=marvell-arm64 PLATFORM_ARCH=arm64
|
||||
|
||||
|
||||
@ -1,9 +1,7 @@
|
||||
#!/bin/sh
|
||||
|
||||
# Copyright (C) 2014,2015 Curt Brune <curt@cumulusnetworks.com>
|
||||
# Copyright (C) 2015 david_yang <david_yang@accton.com>
|
||||
# Copyright (C) Marvell Inc
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
set -e
|
||||
|
||||
@ -31,99 +29,22 @@ fi
|
||||
|
||||
echo "Installer: platform: $platform"
|
||||
|
||||
# install_uimage will be overriden from platform.conf as it is non generic
|
||||
install_uimage() {
|
||||
echo "Copying uImage to NOR flash:"
|
||||
flashcp -v demo-${platform}.itb $mtd_dev
|
||||
}
|
||||
|
||||
# hw_load will be overriden from platform.conf as it is non generic
|
||||
hw_load() {
|
||||
echo "cp.b $img_start \$loadaddr $img_sz"
|
||||
}
|
||||
|
||||
. ./platform.conf
|
||||
|
||||
#install_uimage
|
||||
|
||||
#hw_load_str="$(hw_load)"
|
||||
|
||||
echo "Copying uImage to NAND flash:"
|
||||
# global mount defines
|
||||
demo_dev=ubi0
|
||||
mtd_dev=/dev/$(cat /proc/mtd | grep "SONIC" | grep -o "mtd[0-9]")
|
||||
mtd_num=$(echo $mtd_dev | grep -o "[0-9]")
|
||||
demo_mount=/tmp
|
||||
onie_dev=$(blkid | grep ONIE-BOOT | head -n 1 | awk '{print $1}' | sed -e 's/:.*$//')
|
||||
|
||||
echo "Format mtd partition '$mtd_dev'"
|
||||
ubiformat $mtd_dev
|
||||
#attaches MTD devices (which describe raw flash) to UBI and creates corresponding UBI devices; ('-m 2' --> mtd2)
|
||||
echo "ubiattach mtd '$mtd_num'"
|
||||
ubiattach /dev/ubi_ctrl -m $mtd_num
|
||||
#creates UBI volumes on UBI devices
|
||||
ubimkvol /dev/$demo_dev -N $demo_dev -s 3700MiB
|
||||
|
||||
demo_mount=$(mktemp -d)
|
||||
mkdir -p $demo_mount
|
||||
echo "Mounting ubifs partition"
|
||||
mount -t ubifs /dev/ubi0_0 $demo_mount
|
||||
echo "Mounting $demo_dev on $demo_mount..."
|
||||
echo "sonic extract image starts ..."
|
||||
# Decompress the file for the file system directly to the partition
|
||||
unzip -o $ONIE_INSTALLER_PAYLOAD -x "$FILESYSTEM_DOCKERFS" -d $demo_mount/
|
||||
cd $demo_mount
|
||||
if [ -f fs.cpio ]
|
||||
then
|
||||
cpio -id < fs.cpio
|
||||
rm fs.cpio
|
||||
elif [ -f fs.squashfs ]
|
||||
then
|
||||
unsquashfs -f -d $demo_mount fs.squashfs
|
||||
rm -f fs.squashfs
|
||||
fi
|
||||
cd -
|
||||
TAR_EXTRA_OPTION="--numeric-owner"
|
||||
mkdir -p $demo_mount/var/lib/$DOCKERFS_DIR
|
||||
unzip -op $ONIE_INSTALLER_PAYLOAD "$FILESYSTEM_DOCKERFS" | tar -xpz $TAR_EXTRA_OPTION -f - -C $demo_mount/var/lib/$DOCKERFS_DIR
|
||||
|
||||
echo "unmounting nand partition"
|
||||
umount $demo_mount
|
||||
|
||||
echo "Updating U-Boot environment variables"
|
||||
#global uboot enviroment settings
|
||||
FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
|
||||
|
||||
kernel_addr=0x1100000
|
||||
fdt_addr=0x1000000
|
||||
|
||||
image_name="/boot/zImage"
|
||||
fdt_name="/boot/armada-385-ET6448M_4G_Nand.dtb"
|
||||
|
||||
#BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs debug panic=1 ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off console=ttyS0,115200 ${othbootargs} ${mtdparts}'
|
||||
BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs panic=1 console=ttyS0,115200 ${othbootargs} ${mtdparts}'
|
||||
UBI_LOAD='run ubi_sonic_boot_mount_ubi; ubifsload $kernel_addr $image_name;ubifsload $fdt_addr $fdt_name'
|
||||
UBIBOOTCMD='run ubi_sonic_boot_bootargs; run ubi_sonic_boot_load; bootz $kernel_addr - $fdt_addr'
|
||||
|
||||
|
||||
echo -e $FW_ENV > /etc/fw_env.config
|
||||
|
||||
fw_setenv -f image_name $image_name > /dev/null
|
||||
fw_setenv -f fdt_name $fdt_name > /dev/null
|
||||
fw_setenv -f kernel_addr $kernel_addr > /dev/null
|
||||
fw_setenv -f fdt_addr $fdt_addr > /dev/null
|
||||
|
||||
#make sure ubi number (0) and ubi volume name (ubi0) are set correctly in bootargs_root:
|
||||
#For example, the below command creates an 3000MiB volume on UBI device 0:
|
||||
#setenv bootargs_root root=ubi0:ubi0 rw ubi.mtd=2 rootfstype=ubifs
|
||||
|
||||
fw_setenv -f mtdids 'nand0=armada-nand' > /dev/null
|
||||
fw_setenv -f mtdparts 'mtdparts=armada-nand:10m(U-Boot)ro,208m@10m(ONIE),-(SONIC)' > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot_mount_ubi 'ubi part SONIC; ubifsmount ubi0' > /dev/null
|
||||
|
||||
fw_setenv -f ubi_sonic_boot_bootargs $BOOTARGS > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot_load $UBI_LOAD > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot $UBIBOOTCMD > /dev/null
|
||||
fw_setenv -f bootcmd 'usb start; run ubi_sonic_boot' > /dev/null
|
||||
install_uimage
|
||||
|
||||
hw_load_str="$(hw_load)"
|
||||
|
||||
cd /
|
||||
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
# sonic marvell one image installer
|
||||
|
||||
SONIC_ONE_IMAGE = sonic-marvell.bin
|
||||
$(SONIC_ONE_IMAGE)_MACHINE = marvell
|
||||
SONIC_ONE_IMAGE = sonic-marvell-armhf.bin
|
||||
$(SONIC_ONE_IMAGE)_MACHINE = marvell-armhf
|
||||
$(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie
|
||||
$(SONIC_ONE_IMAGE)_INSTALLS += $(SYSTEMD_SONIC_GENERATOR)
|
||||
ifeq ($(INSTALL_DEBUG_TOOLS),y)
|
||||
|
||||
@ -0,0 +1,143 @@
|
||||
# Copyright (C) Marvell Inc
|
||||
|
||||
# over ride default behaviour
|
||||
|
||||
echo "Preparing for installation ... "
|
||||
|
||||
# global defines
|
||||
kernel_addr=0x1100000
|
||||
fdt_addr=0x1000000
|
||||
|
||||
image_name="/boot/zImage"
|
||||
fdt_name="/boot/armada-385-ET6448M_4G_Nand.dtb"
|
||||
|
||||
# global mount defines
|
||||
demo_dev=ubi0
|
||||
mtd_dev=/dev/$(cat /proc/mtd | grep "SONIC" | grep -o "mtd[0-9]")
|
||||
mtd_num=$(echo $mtd_dev | grep -o "[0-9]")
|
||||
demo_mount=/tmp
|
||||
FW_ENV='/dev/mtd0 \t\t 0x00500000 \t 0x80000 \t 0x100000 \t 8'
|
||||
|
||||
BOOTARGS='setenv bootargs root='$demo_dev' rw rootwait ubi.mtd='$mtd_num' rootfstype=ubifs panic=1 console=ttyS0,115200 ${othbootargs} ${mtdparts}'
|
||||
UBI_LOAD='run ubi_sonic_boot_mount_ubi; ubifsload $kernel_addr $image_name;ubifsload $fdt_addr $fdt_name'
|
||||
UBIBOOTCMD='run ubi_sonic_boot_bootargs; run ubi_sonic_boot_load; bootz $kernel_addr - $fdt_addr'
|
||||
|
||||
et6448m_machine_conf() {
|
||||
SYSCTL_CFG=$demo_mount/usr/share/sonic/device/armhf-marvell_et6448m_52x-r0/syncd.conf
|
||||
|
||||
echo "Configure platform et6448m "
|
||||
rm $demo_mount/lib/udev/rules.d/73-usb-net-by-mac.rules
|
||||
rm -f $demo_mount/usr/bin/reboot || true
|
||||
rm -fr $demo_mount/host/machine.conf
|
||||
cp /etc/machine.conf $demo_mount/host/
|
||||
|
||||
SONIC_VERSION=$(cat $demo_mount/etc/sonic/sonic_version.yml | grep build_version | cut -f2 -d"'")
|
||||
FIRST_BOOT_FILE="$demo_mount/host/image-$SONIC_VERSION/platform"
|
||||
mkdir -p $FIRST_BOOT_FILE
|
||||
touch $FIRST_BOOT_FILE/firsttime
|
||||
|
||||
MAC_ADDR=$(fw_printenv | grep ^ethaddr= | cut -f2 -d"=")
|
||||
sed -i "s/switchMacAddress=.*/switchMacAddress=$MAC_ADDR/g" $demo_mount/usr/share/sonic/device/armhf-marvell_et6448m_52x-r0/et6448m/profile.ini
|
||||
|
||||
# IPv4 and IPv6 arp cache limits
|
||||
echo "sysctl -w net.ipv4.neigh.default.gc_thresh1=16000" >> $SYSCTL_CFG
|
||||
echo "sysctl -w net.ipv4.neigh.default.gc_thresh2=32000" >> $SYSCTL_CFG
|
||||
echo "sysctl -w net.ipv4.neigh.default.gc_thresh3=48000" >> $SYSCTL_CFG
|
||||
echo "sysctl -w net.ipv6.neigh.default.gc_thresh1=8000 " >> $SYSCTL_CFG
|
||||
echo "sysctl -w net.ipv6.neigh.default.gc_thresh2=16000" >> $SYSCTL_CFG
|
||||
echo "sysctl -w net.ipv6.neigh.default.gc_thresh3=32000" >> $SYSCTL_CFG
|
||||
}
|
||||
|
||||
prepare_uboot() {
|
||||
echo "Setting up U-Boot environment..."
|
||||
|
||||
echo -e $FW_ENV > /etc/fw_env.config
|
||||
|
||||
fw_setenv -f image_name $image_name > /dev/null
|
||||
fw_setenv -f fdt_name $fdt_name > /dev/null
|
||||
fw_setenv -f kernel_addr $kernel_addr > /dev/null
|
||||
fw_setenv -f fdt_addr $fdt_addr > /dev/null
|
||||
|
||||
#make sure ubi number (0) and ubi volume name (ubi0) are set correctly in bootargs_root:
|
||||
#For example, the below command creates an 3000MiB volume on UBI device 0:
|
||||
#setenv bootargs_root root=ubi0:ubi0 rw ubi.mtd=2 rootfstype=ubifs
|
||||
|
||||
fw_setenv -f mtdids 'nand0=armada-nand' > /dev/null
|
||||
fw_setenv -f mtdparts 'mtdparts=armada-nand:10m(U-Boot)ro,20m@10m(ONIE),-(SONIC)' > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot_mount_ubi 'ubi part SONIC; ubifsmount ubi0' > /dev/null
|
||||
|
||||
fw_setenv -f ubi_sonic_boot_bootargs $BOOTARGS > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot_load $UBI_LOAD > /dev/null
|
||||
fw_setenv -f ubi_sonic_boot $UBIBOOTCMD > /dev/null
|
||||
fw_setenv -f bootcmd 'usb start; run ubi_sonic_boot' > /dev/null
|
||||
|
||||
}
|
||||
|
||||
install_uimage() {
|
||||
|
||||
ubidetach /dev/ubi_ctrl -m $mtd_num 2>/dev/null || true
|
||||
|
||||
echo -en "Format mtd partition '$mtd_dev' "
|
||||
ubiformat $mtd_dev -y -q || {
|
||||
echo "Failed"
|
||||
}
|
||||
|
||||
#attaches MTD devices (which describe raw flash) to UBI and creates corresponding UBI devices; ('-m 2' --> mtd2)
|
||||
echo -en "ubiattach mtd '$mtd_num' "
|
||||
ubiattach /dev/ubi_ctrl -m $mtd_num || {
|
||||
echo "Failed"
|
||||
}
|
||||
|
||||
#creates UBI volumes on UBI devices
|
||||
ubimkvol /dev/$demo_dev -N $demo_dev -s 3900MiB
|
||||
|
||||
demo_mount=$(mktemp -d) || {
|
||||
echo "Error: Unable to create file sstem mount point"
|
||||
exit 1
|
||||
}
|
||||
|
||||
echo "Mounting $demo_dev on $demo_mount "
|
||||
mount -t ubifs /dev/ubi0_0 $demo_mount || {
|
||||
echo "Failed"
|
||||
}
|
||||
|
||||
echo "Extracting NOS "
|
||||
|
||||
# Decompress the file for the file system directly to the partition
|
||||
unzip -o $ONIE_INSTALLER_PAYLOAD -x "$FILESYSTEM_DOCKERFS" -d $demo_mount/
|
||||
cd $demo_mount
|
||||
|
||||
if [ -f fs.cpio ]; then
|
||||
cpio -id < fs.cpio
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "cpio extraction Failed"
|
||||
fi
|
||||
rm fs.cpio
|
||||
elif [ -f fs.squashfs ]; then
|
||||
unsquashfs -f -d $demo_mount $FILESYSTEM_SQUASHFS
|
||||
if [ $? -ne 0 ]; then
|
||||
echo "unsquashfs extraction Failed"
|
||||
fi
|
||||
rm -f $FILESYSTEM_SQUASHFS
|
||||
fi
|
||||
|
||||
cd -
|
||||
TAR_EXTRA_OPTION="--numeric-owner"
|
||||
mkdir -p $demo_mount/var/lib/$DOCKERFS_DIR
|
||||
unzip -op $ONIE_INSTALLER_PAYLOAD "$FILESYSTEM_DOCKERFS" | tar -xpz $TAR_EXTRA_OPTION -f - -C $demo_mount/var/lib/$DOCKERFS_DIR
|
||||
|
||||
# Update uboot Environment
|
||||
prepare_uboot
|
||||
|
||||
# Platform configuration
|
||||
et6448m_machine_conf
|
||||
|
||||
# Unmounting mount path
|
||||
umount $demo_mount
|
||||
|
||||
echo "Reboot board to boot from installed OS"
|
||||
}
|
||||
|
||||
hw_load() {
|
||||
echo "mtdpart default && ubi part SONIC && ubifsmount 'demo_dev' && ubifsload '$kernel_addr' 'image_name'"
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user