- Use locally built ipmitool
- Use latest version of smartmontools from Bookworm Debian repos
- Update locally built lm-sensors to match version in Bookworm
- Update grpcio and grpcio-tools python packages to match version in
Bookworm
- Why I did it
The existing grub configuration has a hardcoded "amd64" architecture in the kernel and initramfs names. This causes an error in the attempt to load the image compiled for a different architecture.
- How I did it
Use configured architecture in the GRUB config.
- How to verify it
Compile the image for Arm64 architecture and install it on the device.
- Why I did it
On some Nvidia platforms, fan direction could not be determined. Therefore 'N/A' becomes a valid value for those cases.
- How I did it
Add 'N/A' to the valid fan direction mapping, to avoid an error in the log.
- How to verify it
Check fan direction on Nvidia platforms, and make sure there aren't errors in the log.
* Update Redis DB start options for multi-asic and chassis cases
Starting with Redis 7.0 (specifically, redis/redis#9034), setting a
custom `--bind` address on the command line no longer disables protected
mode (which blocks connections from non-localhost IP addresses unless a
password is set). For multi-asic and chassis database DBs, we currently
specify a non-localhost IP address and do not specify any password,
which means this change would break things there.
To work around this, if we are specifying a non-localhost IP address on
the command line, then disable protected mode.
* Clean up debug pacakge list for docker-teamd
The debug pacakges for swss and libswsscommon are already installed by
docker-swss-layer-bookworm and docker-config-engine-bookworm, so they
don't need to be specified here again.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
PR #17836 added the container checking for database-chassis for Supervisor. But the related container_feature_dict[] is missing for the database-chassis. This causes the exception failure shows on Supervisor
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
This is sonic-mgmt-docker Python3 migration.
How I did it
Remove Python3 venv from sonic-mgmt-docker
How to verify it
Compile docker and verify the Python3 venv is NOT there.
Why I did it
github workflow is not easy to extend to other repos.
Use github app instead to share the same workflow.
Work item tracking
Microsoft ADO (number only): 26855292
How I did it
How to verify it
#### Why I did it
src/sonic-platform-common
```
* 796e89a - (HEAD -> master, origin/master, origin/HEAD) Change get_transceiver_info_firmware_versions return type to dict (#440) (2 days ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* f1511c2 - (HEAD -> master, origin/master, origin/HEAD) Move firmware version fields to TRANSCEIVER_FIRMWARE_INFO table (#435) (2 days ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* f4b1a58 - (HEAD -> master, origin/master, origin/HEAD) Fix kexec kernel panic in mvpp2 (#377) (2 days ago) [Pavan Naregundi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* 13c5049 - (HEAD -> master, origin/master, origin/HEAD) [ycabled][tests] Fix UT for bookworm (#431) (15 hours ago) [Arun Saravanan Balachandran]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-sairedis
```
* a91d51d - (HEAD -> master, origin/master, origin/HEAD) Enable 8 Lanes Support in vslib (#1355) (55 minutes ago) [Deepak Singhal]
* ea8767c - [nvidia] Update syncd start to cover changes in SDK initialization process. (#1343) (6 days ago) [Oleksandr Ivantsiv]
* 46e713d - [syncd] Add workaround for SET operation on SAI_HOSTIF_ATTR_QUEUE (#1345) (7 days ago) [Kamil Cudnik]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 1221eae4 - (HEAD -> master, origin/master, origin/HEAD) Explicitly initialize two local variables to 0 (#3046) (26 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-dash-api
```
* d033898 - (HEAD -> master, origin/master, origin/HEAD) Generate and install python stubs (2 days ago) [Lawrence Lee]
* 4fbed99 - Generate and install python stubs (8 days ago) [Lawrence Lee]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-ztp
```
* 56cebae - (HEAD -> master, origin/master, origin/HEAD) Enhancements to allow custom umask usage while executing plugins (#42) (2 hours ago) [rajendra-dendukuri]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Recently, netaddr 1.0.0 was released, which dropped Python 2 support
entirely. Because of this, an empty netaddr package is installed for
Python 2. Ansible still uses Python 2, so this needs to remain
functional. The Python 3 part of sonic-mgmt is fine.
Pin the version of netaddr installed in Python 2 to 0.10.1, the last
supported version.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
### Why I did it
Fix flakiness of eventd UT - run sub after capture service starts
##### Work item tracking
- Microsoft ADO **(number only)**:25650744
#### How I did it
Run sub socket after capture socket is initialized
#### How to verify it
Pipeline
Why I did it
Update smartmontool verson to 7.4. This is done to prevent smartmontools service to exit with non-zero exit status on platform that does not have a SSD/disk to be monitored.
Until Debian Bullseye (which had smartmontools 7.2), Debian had a patch applied that changed the default quit mode to never exit. A bug report was filed on Debian, saying that the source code patch isn't needed and could just be done via command line options, and also that smartmontools 7.3 has a new built-in option to exit with 0 if there are no monitorable devices found (which prevents systemd from treating it as a service failure). Because of that, Debian Bookworm (which also upgraded to 7.3) removed the patch and restored the default behavior of exiting with exit code 17 if there are no devices found.
Smartmontools v7.3 has this issue, because of which smartd exits with non-zero exit status even with "-q" option.
How I did it
Update the smartmontools to version 7.4 which has the fix for exiting gracefully if no monitoring device is found
Added smartd option "-q nodev0" to allow smartd to exit with status 0 if no monitoring device found
- Why I did it
The cable thermal sensors will be deprecated from the kernel driver. When cable host management is enabled, NOS will fetch the cable temperature from cable EEPROM, kernel driver will not provide the sysfs anymore.
- How I did it
Remove the relevant sensor form the conf files
- How to verify it
Run sonic mgmt sensor test
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
src/sonic-utilities
```
* 81c5349f - (HEAD -> master, origin/master, origin/HEAD) [chassis] fix show bgp summary when no neighbors are present on one ASIC (#3158) (10 hours ago) [Arvindsrinivasan Lakshmi Narasimhan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
These changes adjust Nokia IXR7250 thermal sensor logging thresholds.
Why I did it
To modify the thermal sensor logging thresholds used on LC and Supervisor.
How I did it
Modified the JSON based thermal logging thresholds used to determine when to log current high sensor temperature and hottest sensor margin fluctuations.
How to verify it
Verify that syslog messages indicating current (high) temperature and margin values are only logged when these respective values fluctuate by at least 5 degrees.
- Why I did it
Fix the code to work also after warm reboot to work with FW controlled ports.
In warm reboot the control state sysfs of each port does not change unlike reboot or fast boot.
- How I did it
1. Check procfs cmdline if warm reboot done this is due to the fact pmon don't recognize warm reboot when it's taking place since pmon is loaded after warm reboot is finished.
2. If warm reboot done, check in static detection part for each port if it's FW controlled. If so, leave it this way and stop the state machine flow (set it to final state).
- How to verify it
1. Boot a switch with CMIS host management with at least one FW controlled port (non active cables or non cmis cables) then run warm reboot.
2. Verify no errors of sysfs reading appears for control sysfs
#### Why I did it
src/sonic-sairedis
```
* a504933 - (HEAD -> master, origin/master, origin/HEAD) Change dash API pipeline name (#1351) (11 hours ago) [Kamil Cudnik]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* b3b6a838 - (HEAD -> master, origin/master, origin/HEAD) [test_mux] Multi-mux-nh full test coverage (#3028) (25 minutes ago) [Nikola Dancejic]
* 3bd01444 - Bfd support for TSA state. (#2926) (6 hours ago) [siqbal1986]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* a3cf5c02 - (HEAD -> master, origin/master, origin/HEAD) Fix the sfputil treats page number as decimal instead of hexadecimal (#3153) (6 hours ago) [Kebo Liu]
* 167f9966 - [Mellanox] Add support of the nvidia-bluefield platform to generate-dump utility. (#3091) (20 hours ago) [Oleksandr Ivantsiv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 888075d - (HEAD -> master, origin/master, origin/HEAD) [ssd_generic] Add support Transcend ssd-health. (#436) (31 hours ago) [Michael Shih]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-dash-api
```
* da6899b - (HEAD -> master, origin/master, origin/HEAD) Add/update fields needed for private link implementation (9 hours ago) [Prince Sunny]
* 960eab3 - Merge branch 'master' into pl-api (33 hours ago) [Prince Sunny]
* bc29979 - Merge branch 'master' into pl-api (4 days ago) [Lawrence Lee]
* 2d565d3 - Merge branch 'master' into pl-api (4 days ago) [Lawrence Lee]
* df6c512 - remove tunnel_key (4 days ago) [Lawrence Lee]
* 4d5ebda - Update proto files for PL (4 days ago) [Lawrence Lee]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* b18cbac6 - (HEAD -> master, origin/master, origin/HEAD) [Ci] Fix the test script naming issue (#3021) (81 minutes ago) [xumia]
* 5fd896f6 - [PortOrch] Add FEC codeword errors in port stats (#3029) (87 minutes ago) [vdahiya12]
* 77d56e6e - Fix the Orchagent crash seen during Port channel OC test cases. (#3042) (9 hours ago) [saksarav-nokia]
* 4d470592 - Fix memory leak and object copying bugs in orchagent (#3017) (10 hours ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* 0408226f - (HEAD -> master, origin/master, origin/HEAD) Fix `sudo config load_mgmt_config` fails with error "File /var/run/dhclient.eth0.pid does not exist" (#3149) (18 hours ago) [Mai Bui]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Upgrade the xgs SAI version to 10.1.6.0 to include the following fix:
10.1.6.0: [CS00012332630][SAI_BRANCH rel_ocp_sai_10_1] SAI - OTHER - [SAI BUG] sflow use psample to send packet, but the psample in linux version is not right.
10.1.4.0: [CS00012329827]ECMP LB traffic polarization, configure hash_offset along with hash_seed attr
10.1.3.0: Double commit test code fixes in EM for 10.1.
10.1.2.0: fix ODP packaging in rel_ocp_sai_10_1
10.1.1.0: Use knet-cb procfs path for DNX port speed sampling rate (does not use new genl)
Work item tracking
Microsoft ADO (number only): 26720003
How I did it
Upgrade xgs SAI version in sai.mk file.
How to verify it
Run full qual on s6100 T1: https://elastictest.org/scheduler/testplan/65c1c2e69e3e72f540cae34b
#### Why I did it
src/dhcprelay
```
* 363fa06 - (HEAD -> master, origin/master, origin/HEAD) Skip vlans with no dhcpv6 server configured (#46) (8 hours ago) [kellyyeh]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* d566e15a - (HEAD -> master, origin/master, origin/HEAD) Allow L4 port range egress ACL rules on DNX (#3014) (9 hours ago) [arista-nwolfe]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* b5487357 - (HEAD -> master, origin/master, origin/HEAD) [route_check.py] account static routes in route_check.py (#3120) (9 hours ago) [Stepan Blyshchak]
* 64e1f9f4 - [Mellanox buffer migrator] Do not touch the buffer model on generic SKUs if the buffer configuration is empty (#3114) (19 hours ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
when reading sysfs fd upon python poller events, there's end of line garbage like "# 012" (without space between the 2 parts) trailing the real value of 1 or 0
- How I did it
using python strip() to remove end of line
- How to verify it
run the CMIS host management feature on a switch
wait few minutes until switch completes boot up sequence including CMIS host manager
then disconnect or reconnect a port to create a poller event
#### Why I did it
src/sonic-sairedis
```
* e5b8d4e - (HEAD -> master, origin/master, origin/HEAD) Make changes to support compiling on Bookworm (with GCC 12) (#1344) (3 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
