rules/config.user allows overriding default properties without
touching tracked files. This change makes sure all properties
can be set and not just the ones used in slave.mk.
Signed-off-by: Christian Svensson <blue@cmd.nu>
1) Dropped non-required IP update in admin.conf, as all masters use VIP only (#7288)
2) Don't clear VERSION during stop, as it would overwrite new version pending to go.
3) subprocess, get return value from proc and do not imply with presence of data in stderr.
- Fix build issue when `/proc/cmdline` is not available. Fixes#7145
- Properly detect linecard slot from linecard CPU
- Some fixes on the uart link between supervisor and linecard CPU
- Other small fixes
* Add "bgp bestpath peer-type multipath-relax" to frr
This new BGP configuration is akin to "bgp bestpath aspath multipath-relax".
When applied, paths learned from different peer types will be eligible
to be considered for multipath (ECMP). Paths from all of eBGP, iBGP, and
confederation peers may be included in a multipath group if they are
otherwise equal cost.
When such a multipath group is created, it is not desirable for
iBGP nexthops to be discarded from the FIB because they are not directly
connected. So when publishing the nexthop group to zebra, bgpd will allow
recursive resolution, but only when there are iBGP-learned paths in the
group.
This change is merged in FRR in this PR FRRouting/frr#8056
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
This commit has following changes:
* Add templates and code to support VoQ chassis iBGP peers
* Add support to convert a new VoQChassisInternal element in the
BGPSession element of the minigraph to a new BGP_VOQ_CHASSIS_NEIGHBOR
table in CONFIG_DB.
* Add a new set of "voq_chassis" templates to docker-fpm-frr
* Add a new BGP peer manager to bgpcfgd to add neighbors from the
BGP_VOQ_CHASSIS_NEIGHBOR table using the voq_chassis templates.
* Add a test case for minigraph.py, making sure the VoQChassisInternal
element creates a BGP_VOQ_CHASSIS_NEIGHBOR entry, but not if its
value is "false".
* Add a set of test cases for the new voq_chassis templates in
sonic-bgpcfgd tests.
Note that the templates expect the new
"bgp bestpath peer-type multipath-relax" bgpd configuration to be
available.
Signed-off-by: Joanne Mikkelson <jmmikkel@arista.com>
Lack of having the support for no_proxy in SONiC build environment limits enterprise companies to put some internal hacks to ensure the proxy's dont refer to some Intranet site for artifactory downloads etc. Today. Using no_proxy is familiar in proxy settings terminology and excludes traffic destined to certain hosts.
Most Web clients hence support connection to proxy servers via environment variables:
http_proxy / HTTP_PROXY
https_proxy / HTTPS_PROXY
no_proxy / NO_PROXY
These variables tell the client what URL should be used to access the proxy servers and which exceptions should be made.
How to verify it
Simply set up the variable in the bash shell at build time.
export no_proxy=internal.example.com, internal2.example.com
Usage is:
no_proxy is a comma- or space-separated list of machine or domain names, with optional :port part. If no :port
part is present, it applies to all ports on that domain.
Why I did it
Failed to build the centec-arm64 for no space in docker data root.
How I did it
Change to use the data root to the folder under /data.
See detail info about DOCKER_DATA_ROOT_FOR_MULTIARCH in the file Makefile.work.
How to verify it
Set the environment variable, then the /data used as docker root.
- Add peer_switch field to DEVICE_METADATA table
- In PORT table:
- Set used ports to admin status up
- Set mux_cable to true for downlinks in use
- In MUX_CABLE table:
- Only add entry if the downlink is in use
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
#### Why I did it
- xcvrd crash was seen in latest 201811 images.
- For Dell S6100,API 2.0 uses poll mode while 1.0 was still using interrupt mode.
#### How I did it
- Modified get_transceiver_change_event in 1.0 to poll mode.
c4d4790 [xcvrd] refactor Y-Cable firmware information to conform with all vendors (#171)
be7f4e1 [voqinband]Support for inband port as regular port (#145)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
eff5c1c [thermalctld] No need exit thermalcltd when loading invalid policy file (#172)
5b6d9c0 [syseepromd] Add unit tests; Refactor to allow for greater unit test coverage (#156)
This improvement reads current SONiC version directly from `/proc/cmdline`.
it supports `grub/aboot/uboot` bootloaders.
**Code snippet**:
```bash
cat /proc/cmdline | sed -n 's/^.*loop=\/*image-\(\S\+\)\/.*$/\1/p'
```
**Description**:
```
-n don't print lines
s substitute
^.* matches anything before the <image_version>
loop= matches <loop> kernel parameter
\/*image- matches <image_version> prefix
\(\S\+\) matches <image_version> group and assigns it to \1
\/.*$ matches anything after the <image_version>
\1 replace everything with <image_version>
p print it
```
closes#6267
#### Why I did it
* To fix#6267
#### How I did it
* Fixed installer scripts
#### How to verify it
1. Write invalid SONiC version to sonic_version.yml
2. Run SONiC-To-SONiC update
Support to merge the SONiC package versions upgrade pull request automatically.
#### How I did it
Add the automerge tag in the pull request.
1. Sent by the author mssonicbld
2. Only contains changes in files/build/**/*
3. Only for the specified branch 202012
Merge the pull request.
1. Sent by the author mssonicbld
2. The Azure Pipelines checker complete and successful
3. The pull request contains label automerge
Why I did it
Fix the wrong build options and improve display name for some tasks
1. Fix the wrong build architecture for arm64 and armhf
2. Fix the build timeout parameter
1c3f75e (HEAD -> master, origin/master, origin/HEAD) pindown the version of github.com/openconfig/gnoi (#76)
33acd5b [ci]: setup proper azp (#75)
5d82051 [CI] Set up CI with Azure Pipelines (#72)
0688cdb Remove go get commands from Makefile to prevent go.mod file from chan… (#66)
5c63670 (HEAD, origin/master, origin/HEAD) [intfmgrd] reach reconciled state at start when there are no interfaces configuration to process (#1695)
66e1aab [Dynamic Buffer Calc] Enhancement: coding style and LGTM alerts (#1693)
637e8d0 Skip Macsec test case till macsec orch code is made SAIv1.8.0 compatible (#1688)
872b5cb [ci]: archive swss pytests (#1690)
73cbd91 [Makefile] Reorder libsaimetadata and libswsscommon (#1689)
cba6576 Correct the sflow default sample rate (#1623)
aac71e6 Don't update pools when ingress_lossless_pool is created but the initialization hasn't finished yet (#1685)
ae5f051 Fix dynamic buffer bug occuring in rare condition (#1678)
691bd30 [voq/systemlag] Voq system lag functionality (#1605)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
With the latest 201911 image, the following error was seen on staging devices with TSB command ( for both single asic, multi asic ). Though this err message doesn't affect the TSB functionality, it is good to fix.
admin@STG01-0101-0102-01T1:~$ TSB
BGP0 : % Could not find route-map entry TO_TIER0_V4 20
line 1: Failure to communicate[13] to zebra, line: no route-map TO_TIER0_V4 permit 20
% Could not find route-map entry TO_TIER0_V4 30
line 2: Failure to communicate[13] to zebra, line: no route-map TO_TIER0_V4 deny 30
In addition, in this PR I am fixing the message displayed to user when there are no BGP neighbors configured on that BGP instance. In multi-asic device there could be case where there are no BGP neighbors configured on a particular ASIC.
Why I did it
Add bgpcfgd support for static routes.
How I did it
Add bgpcfgd support to subscribe changes in STATIC_ROUTE table in CONFIG_DB and program via vtysh. The key of STATIC_ROUTE table is formatted as STATIC_ROUTE|vrf|ip_prefix, while the vrf is optional. If would be treated the same as "default" if no vrf is given.
Add unit tests.
#### Why I did it
Allowing an application to set a stop timeout for processes and threads provides the following benefits:
1. Prevents the application from hanging indefinitely in the case a process or thread does not exit
2. Allow ProcessTaskBase a chance to let the process exit gracefully before attempting to kill it
Default values are as follows:
- ProcessTaskBase: 1 second
- ThreadTaskBase: No timeout
#### How I did it
- Add optional `stop_timeout_secs` parameter to initializers of ProcessTaskBase and ThreadTaskBase
- Additionally:
- Prefix private attributes with an underscore
- Remove obsolete comments
The platform name for MSN4600C in sfputil pliugin is not complete: "x86_64-mlnx_msn4600c" -> "x86_64-mlnx_msn4600c-r0"
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Compiling ethtool from source is causing ethtool unit tests to fail on ARM Platforms.
These tests are failing: (By default netlink-interface is enabled while compiling ethtool)
Link: ([Test File Link](https://salsa.debian.org/kernel-team/ethtool/-/blob/debian/1%255.9-1/test-cmdline.c#L28))
```
FAIL: test-cmdline
==================
E: ethtool 16_char_devname! returns 1
E: ethtool
127_char_devname0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcde returns 1
E: ethtool --change devname xcvr external returns 0
E: ethtool --change devname speed 100 duplex half port tp autoneg on advertise 0x1 phyad 1 xcvr external wol p sopass 01:23:45:67:89:ab msglvl 1 returns 0
FAIL test-cmdline (exit status: 1)
```
Tested this on Local ARM Emulated Container:
```
(Docker Container Emulating ARM)
vkarri@3a03c70eed35:/tmp/ethtool$ ./ethtool 16_char_devname!
netlink interface initialization failed, device name longer than 15 not supported
vkarri@3a03c70eed35:/tmp/ethtool$ echo $?
1 (Expected 0)
vkarri@3a03c70eed35:~/ethtool$ ./ethtool 16_char_devnameee
netlink interface initialization failed, device name longer than 15 not supported
Checked for dependencies: (all are present)
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libmnl0
libmnl0:
Installed: 1.0.4-2
Candidate: 1.0.4-2
Version table:
*** 1.0.4-2 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libc6
libc6:
Installed: 2.28-10
Candidate: 2.28-10
Version table:
*** 2.28-10 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
```
#### How I did it
Disabled netlink-interface for ethtool.
Even though Netlink is not available, it doesn't seem to impact what ethtool was supposed to do. In fact the older version which was in use before this PR [#5725](https://github.com/Azure/sonic-buildimage/pull/5725) did not have netlink support and everything seemed to work well
Article on Netlink-Support for ethtool: https://lwn.net/Articles/783633/
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
#### Why I did it
To eliminate the need to write duplicate code in order to import a Python module from a source file.
#### How I did it
Add `general` module to sonic-py-common, which contains a `load_module_from_source()` function which supports both Python 2 and 3.
Call this new function in:
- sonic-ctrmgrd/tests/container_test.py
- sonic-ctrmgrd/tests/ctrmgr_tools_test.py
- sonic-host-services/tests/determine-reboot-cause_test.py
- sonic-host-services/tests/hostcfgd/hostcfgd_test.py
- sonic-host-services/tests/procdockerstatsd_test.py
- sonic-py-common/sonic_py_common/daemon_base.py
Problem:
Default groupadd for redis, takes 1000 by default. This forces, subsequently created admin group to get 1001.
As all TACACS users are created with 1000 as their gid, they end up in redis group.
Fix:
Create redis group *after* admin group is created
Add a check that admin group id is 1000
872f0a3 [Y-Cable] refactor get_firmware_version to comply with all vendors (#182)
cc162d6 [sonic_y_cable]: Decorate all method for mux simulator (#181)
fa02416 Change import order in Ycable helper and EEPROM read bytearray change in SFP plugin (#177)
0b60982 [thermal_base] Add setter functions for critical thresholds (#180)
10dc16f [y_cable] add support for enable/disable autoswitch feature on Y cable (#176)
c6c81a8 [fan_drawer_base.py] Fix FanDrawer get_status_led interface (#175)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Fix#7180
Update systemd to v247 in order to pick the fix for "core: coldplug possible nop_job" systemd/systemd#13124
Install systemd, systemd-sysv from buster-backports. Pass "systemd.unified_cgroup_hierarchy=0" as kernel argument to force systemd to not use unified cgroup hierarchy, otherwise dockerd won't start moby/moby#16238.
Also, chown $FILSYSTEM_ROOT for root, otherwise apt systemd installation complains, see similar https://unix.stackexchange.com/questions/593529/can-not-configure-systemd-inside-a-chrooted-environment
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Make sure Everflow always gets classified as Mirror table and not as Control Plane on multi-asic platforms.
Why I did:
In Multi-asic platforms we generate Everflow acl table data from minigraph for both host and namespace.
It is possible in multi-asic minigraph if there are no external port-channel (Only Router Port IP Interface) then Everflow table will have no binded interface in host and will gets classified as Control Plane ACL while in namespace gets classified as Mirror Table.
For ACL Rule generation we read global db as source of truth for acl table information and so for everflow rule generation if tables gets classified as Control plane we can generate rules with invalid action causing orchagent to throw runtime error.
How I did:
If the table is attach to erspan interface in minigraph then it always gets classified as mirror table.
- Why I did it
Add missed files for dynamic buffer calculation for ACS-MSN3420 and ACS-MSN4410
- How I did it
asic_table.j2: Add mapping from platform to ASIC
Add buffer_dynamic.json.j2 for ACS-MSN4410.
- How to verify it
Check whether the dynamic buffer calculation daemon starts successfully.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
