185 lines
5.6 KiB
Markdown
185 lines
5.6 KiB
Markdown
# Ingrasys S9200-64X Platform Driver for SONiC
|
|
|
|
Copyright (C) 2016 Ingrasys, Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
## Licensing terms
|
|
|
|
The Licensing terms of the files within this project is split 2 parts.
|
|
The Linux kernel is released under the GNU General Public License version 2.
|
|
All other code is released under the GNU General Public License version 3.
|
|
Please see the LICENSE file for copies of both licenses.
|
|
|
|
## Contents of this package
|
|
|
|
- service/
|
|
> Service config files for platform initialization and monitoring
|
|
- utils/
|
|
> Scripts useful during platform bringup and sysfs function
|
|
- conf/
|
|
> Platform configure files.
|
|
|
|
## Kernel modules and drivers
|
|
|
|
The driver for interacting with Ingrasys S9200-64X is contained in the I2C
|
|
kernel module and initialization script. The initialization script loads
|
|
the modules in the correct order. It has been built and tested against
|
|
the Linux 3.16 kernel.
|
|
|
|
The initialization script will modprobe the needed modules, navigate to the
|
|
module's device directory in sysfs, and write configuration data to
|
|
the kernel module.
|
|
|
|
### IGB
|
|
|
|
This is OOB Ports on front panel for management plane.
|
|
|
|
The IGB module must be loaded first on Ingrasys S9200-64X platform.
|
|
|
|
### I2C i801
|
|
|
|
The I2C i801 on Ingrasys S9200-64X can be found in
|
|
`/sys/bus/i2c/devices/i2c-0/`
|
|
|
|
This is I2C bus for Clock Gen, DIMM channel and digital potentiometers.
|
|
|
|
The i801 module must be loaded second on Ingrasys S9200-64X.
|
|
|
|
### I2C iSMT
|
|
|
|
The I2C iSMT module on S9200-64X can be found in
|
|
`/sys/bus/i2c/devices/i2c-1/`
|
|
|
|
This is I2C bus for CPLD, HWM, power controller and I2C Switches.
|
|
|
|
The i801 module must be loaded third on Ingrasys S9200-64X.
|
|
|
|
### I2C PCA9548
|
|
The PCA9548 module on S9200-64X can be found in
|
|
`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`,
|
|
`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`,
|
|
`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`,
|
|
`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`.
|
|
|
|
The pca9548 module for zQSFP module get/set functions, PSU information,
|
|
fan status and EEPROM.
|
|
|
|
## Hardware components
|
|
|
|
The hardware components are initialized in the init script on S9200-64X.
|
|
The following describes manual initialization as well as interaction.
|
|
The examples below are just for Ingrasys S9200-64X platform.
|
|
|
|
### Hardware initialization
|
|
|
|
When the sonic-platform-ingrasys-s9200-64x package is installed on the S9200-64X,
|
|
it is automatically initialized. If you want to manual initialization, the
|
|
utility command usage as follows:
|
|
```
|
|
i2c_utils.sh i2c_init
|
|
```
|
|
|
|
### EEPROM
|
|
|
|
The EEPROM is including the board SKU, model name, vendor name, serial number,
|
|
and other information can be accessed with the specific eeprom kernel module.
|
|
After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs.
|
|
|
|
The hexdump utility can be used to decode the raw output of the EEPROM.
|
|
For example,
|
|
```
|
|
bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device
|
|
bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C
|
|
```
|
|
|
|
### Front panel LEDs
|
|
|
|
LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`.
|
|
Utility function command usage as follows:
|
|
|
|
```
|
|
Status LED:
|
|
i2c_utils.sh i2c_sys_led green|amber
|
|
|
|
Fan status LED:
|
|
i2c_utils.sh i2c_fan_led green|amber
|
|
|
|
PSU1 status LED:
|
|
i2c_utils.sh i2c_psu1_led green|amber
|
|
|
|
PSU2 status LED:
|
|
i2c_utils.sh i2c_psu2_led green|amber
|
|
|
|
```
|
|
QSFP Module Port LEDs control by ASIC library.
|
|
|
|
|
|
### Fan speed
|
|
|
|
Fan speed are controlled by the w83795 kernel module.
|
|
It can be found in `/sys/class/hwmon/hwmon5/device/`.
|
|
If they were compiled as modules, you will need to modprobe w83795 for
|
|
their sysfs entries to show up. Each fan has an `fan<N>_input` file
|
|
for reading the fan speed. And `pwm2` setting fan1/fan3/fan5/fan7.
|
|
|
|
There is docker-platform-monitor container installed fancontrol package that can
|
|
automatic control platform fan speed.
|
|
|
|
|
|
### Temperature sensors
|
|
|
|
Temperature sensors are controlled by the w83795 kernel
|
|
module. It can be found in `/sys/class/hwmon/hwmon5/device/`.
|
|
If they were compiled as modules, then you will need to modprobe w83795 for
|
|
their sysfs entries to show up.
|
|
`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC
|
|
temperature sensor.
|
|
|
|
There is docker-platform-monitor container installed lm-sensors package that can
|
|
monitor platform temperature. And `sensors` command can show each
|
|
temperature sensors status.
|
|
|
|
### Power supplies
|
|
|
|
Power supplies status and its EEPROM info can be used i2c utility
|
|
`/usr/sbin/i2c_utils.sh` to get.
|
|
The usage as follows:
|
|
```
|
|
PSU EEPROM:
|
|
i2c_utils.sh i2c_psu_eeprom_get
|
|
hexdump -C psu0.rom
|
|
hexdump -C psu1.rom
|
|
|
|
PSU Status:
|
|
i2c_utils.sh i2c_psu_status
|
|
```
|
|
|
|
### QSFPs
|
|
QSFP modules are managed by the pca9548 kernel driver.
|
|
The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and
|
|
module EEPROM informations.
|
|
The usage as follows:
|
|
```
|
|
QSFP EEPROM:
|
|
i2c_utils.sh i2c_qsfp_eeprom_get [1-64]
|
|
|
|
QSFP Insert Event:
|
|
i2c_utils.sh i2c_qsfp_eeprom_get [1-64]
|
|
0 => not insert
|
|
1 => inserted
|
|
```
|
|
|