3e9437b63e
SDK/FW Fixed Issues: • When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work. • When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value • After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked. • Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set • If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail. • In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed • When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources • When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck • SN2201 Module 1 is considered to be present/linked while no cable/module is plugged • On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes SAI New features: • ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets. • PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event. • Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario. • Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario. SAI Fixed issues: • When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it • When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty. Signed-off-by: Kebo Liu <kebol@nvidia.com>
63 lines
2.0 KiB
Makefile
63 lines
2.0 KiB
Makefile
#
|
|
# Copyright (c) 2016-2022 NVIDIA CORPORATION & AFFILIATES.
|
|
# Apache-2.0
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
# mellanox asic firmware
|
|
|
|
MLNX_FW_BASE_PATH = $(MLNX_SDK_BASE_PATH)
|
|
|
|
# Place an URL here to FW if you want to download FW instead
|
|
MLNX_FW_BASE_URL =
|
|
|
|
SIMX_VERSION = 23.4-1072
|
|
|
|
FW_FROM_URL = y
|
|
|
|
MLNX_FW_ASSETS_RELEASE_TAG = fw-2010.5144
|
|
MLNX_FW_ASSETS_URL = $(MLNX_ASSETS_GITHUB_URL)/releases/download/$(MLNX_FW_ASSETS_RELEASE_TAG)
|
|
|
|
ifeq ($(MLNX_FW_BASE_URL), )
|
|
MLNX_FW_BASE_URL = $(MLNX_FW_ASSETS_URL)
|
|
endif
|
|
|
|
MLNX_SPC_FW_VERSION = 13.2010.5144
|
|
MLNX_SPC_FW_FILE = fw-SPC-rel-$(subst .,_,$(MLNX_SPC_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC_FW_FILE)
|
|
|
|
MLNX_SPC2_FW_VERSION = 29.2010.5144
|
|
MLNX_SPC2_FW_FILE = fw-SPC2-rel-$(subst .,_,$(MLNX_SPC2_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC2_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC2_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC2_FW_FILE)
|
|
|
|
MLNX_SPC3_FW_VERSION = 30.2010.5144
|
|
MLNX_SPC3_FW_FILE = fw-SPC3-rel-$(subst .,_,$(MLNX_SPC3_FW_VERSION))-EVB.mfa
|
|
$(MLNX_SPC3_FW_FILE)_PATH = $(MLNX_FW_BASE_PATH)
|
|
$(MLNX_SPC3_FW_FILE)_URL = $(MLNX_FW_BASE_URL)/$(MLNX_SPC3_FW_FILE)
|
|
|
|
MLNX_FW_FILES = $(MLNX_SPC_FW_FILE) $(MLNX_SPC2_FW_FILE) $(MLNX_SPC3_FW_FILE)
|
|
|
|
ifeq ($(FW_FROM_URL),n)
|
|
SONIC_COPY_FILES += $(MLNX_FW_FILES)
|
|
else
|
|
SONIC_ONLINE_FILES += $(MLNX_FW_FILES)
|
|
endif
|
|
|
|
MLNX_FILES += $(MLNX_FW_FILES)
|
|
|
|
export MLNX_SPC_FW_FILE
|
|
export MLNX_SPC2_FW_FILE
|
|
export MLNX_SPC3_FW_FILE
|