Why I did it
For some devices whose log folder size is larger than 200M, for example, 256M, the LOG_FILE_ROTATE_SIZE_KB should be 16M. and
THRESHOLD_KB=$((USABLE_SPACE_KB - (NUM_LOGS_TO_ROTATE * LOG_FILE_ROTATE_SIZE_KB * 2)))
= $(( (VAR_LOG_SIZE_KB * 90 / 100) - RESERVED_SPACE_KB)) - (NUM_LOGS_TO_ROTATE * LOG_FILE_ROTATE_SIZE_KB * 2)))
= $(( (256M * 90 / 100) - 4096)) - (8 * 16M * 2)))
the result would be a negative value
Work item tracking
Microsoft ADO (number only):
24524827
How I did it
Add a case for 400M, if the log folder size is between 200M and 400M, set the log file size to 2M
How to verify it
Do cmd "sudo logrotate -f /etc/logrotate.conf" on DUT which val/log folder size is 256M, and check the syslog.
Why I did it
This is a fix for PR [kernel] Change grub cmdline to set c-states to 0 for "Intel" CPUs by shlomibitton · Pull Request #6051 · sonic-net/sonic-buildimage (github.com)
The original PR will disable intel idle driver but it cannot limit the max c-state to 1 due to system will fall back to acpi idle driver.
Currently intel_idle.max_cstate=0 is already present, which will disable intel idle driver. With the added option, common idle driver will be disabled as well, so there will not be idle management. This is to prevent a bug that can be triggered by idle instruction on intel platform.
How I did it
Add the option to installer file beside intel_idle.max_cstate=0
How I did it
Update Yang definition of IN_PORTS and OUT_PORTS to string.
Since we cannot split the string with comma (,) and validate each substring is a valid SONiC port name. The only restriction for them is must be a string.
How to verify it
Verified by building sonic_yang_models-1.0-py3-none-any.whl. While building the target package, unit tests were run and passed.
Build a SONiC image based on 202205 branch and installed on physical DUT. Re try the steps in [Yang] Incorrect definition of IN_PORTS and OUT_PORTS in sonic-acl.yang #16190 and can see below success response:
Why I did it
Dell S6100 Platform components needs to be updated.
How I did it
Modified platform.json to fix the issue.
How to verify it
Run sonic-mgmt component test and check whether it passes.
Why I did it
Few commands in multiasic platforms when run with the "sudo ip netns exec asic0 " option was taking like 15 mins to get the o/p. This behavior of sudo getting hung was seen by just doing this
jujoseph@svcstr-server-2:~ sudo ip netns exec asic0 bash
jujoseph@svcstr-server-2:~ sudo ls
deally sudo is not needed as we have /bin/ip netns identify present in /etc/sudoers file. Hence removing it
Why I did it
For security and consistency consideration, change the docker image from alpine to Debian in Makefile
Work item tracking
Microsoft ADO (number only): 23077660
How I did it
change the docker image from alpine to Debian in Makefile
Why I did it
Downgrade the symcrypt version, use the SymCrypt version v103.0.1 for certification.
Work item tracking
Microsoft ADO (number only): 24222567
How I did it
How to verify it
- Why I did it
The recent change #15685 (comment) removed the db migration for non first reboots.
This is problematic for many deployments which doesn't rely on ZTP and push a custom config_db.json
Port to older branches after #15685 is ported back
- How I did it
Re-introduce the logic to run the db_migrator on non-first boots
- How to verify it
Verified reboot and warm-reboot cases
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
How I did it
Fix the regex for L4 port range in openconfig_acl.py.
How to verify it
Build image and install on Arista-720DT DUT, then try the repro steps in #16189 and confirmed the ACL rule be setup correctly:
#### Why I did it
src/sonic-sairedis
```
* 2ebbd48 - (HEAD -> 202211, origin/202211) [syncd] Add pre match logic for acl entry (#1240) (11 hours ago) [Kamil Cudnik]
* 1db8726 - Use SAI_STATUS_ITEM_NOT_FOUND when key not found (#1224) (11 hours ago) [Lawrence Lee]
* 9e4071b - [CI]: Fix collect log error in azp template. (#1282) (4 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* 10d7946 - (HEAD -> 202211, origin/202211) PATCH] net: allow user to set metric on default route learned via Router Advertisement (#326) (8 hours ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
DEPENDS:
[202211][ppi]: Implement port bulk comparison logic (#2564) sonic-swss#2821
HLD: sonic-net/SONiC#1084
Why I did it
Enabled port late create on SN5600 switch boots up with no ports
Work item tracking
N/A
How I did it
Updated SAI xml config file
How to verify it
Run sonic-mgmt tests fastboot
- Why I did it
Update Mellanox MFT tool to version 4.25.0-62
- How I did it
Update the MFT tool make file
- How to verify it
Run full sonic-mgmt regression.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
src/sonic-platform-common
```
* 05cf5c1 - (HEAD -> 202211, origin/202211) Change Y cable simulator log level from error to warning due to false alarm (11 hours ago) [ShiyanWangMS]
* 35ea290 - Update CMIS api's rendering max-duration (#375) (11 hours ago) [rajann]
* 33bd498 - Retrieve FW version using CDB command for CMIS transceivers + handle single bank FW versioning (#372) (11 hours ago) [mihirpat1]
* 2434362 - Render Media lane and Media assignment options info from Application Code (#368) (11 hours ago) [rajann]
* 862674b - Modify sfputil show fwversion to include build version for active/inactive FW version fields (#367) (11 hours ago) [mihirpat1]
* 8edfece - Adding electrical for 800G and 100G (#365) (11 hours ago) [mihirpat1]
* 8a1debf - SFF-8472: Fix tx_disable_channel to avoid write to read-only bit (#364) (11 hours ago) [mihirpat1]
* 223a231 - Update host electrical interface for 2x400G breakout cable (#363) (11 hours ago) [mihirpat1]
* baabd8f - fix get module hardware minor revision (#361) (11 hours ago) [Qingxiao Ren]
* 2ebabf5 - Prevent VDM dictionary related KeyError when a transceiver module is pulled while a bulk get method is interrogating said module (#360) (11 hours ago) [snider-nokia]
* 1498ed6 - [CMIS] Add API to get module power up duration (#354) (11 hours ago) [ChiouRung Haung]
* 1cae718 - Modify get_host_lane_assignment_option to return value based on application id (#352) (11 hours ago) [mihirpat1]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* Fix CONFIG_DB_INITIALIZED flag check logic and set/reset flag for warm-reboot
* Fix db-cli usage
* Handle same image warm-reboot and generalize handling of INIT flag
* Cover boot from ONIE case: set config init flag when minigraph, config_db are missing
* Handle case: first boot of SONiC
* Check for config init flag
* Simplify logic, and do not call db_migrator for same image reboot
Backport of #15961
Why I did it
Added the fwtrace config files in order to be able to call mlxstrace utility during show techsupport dump.
Work item tracking
Microsoft ADO (number only):
How I did it
Added fwtrace config files. Added path to these files to sai.profile for each mlnx device.
How to verify it
Execute the show techsupport command and check if mlxstrace output is in system dump.
This is to backport #16096
Why I did it
SONiC changes:
Support Spectrum4 ASIC FW binary building.
Support new SDK sx-obj-desc lib building since new SAI need it.
Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2211.25.1.0
SDK/FW bug fixes
In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
SDK/FW Features
On SN2700 all ports can support y cable by credo
SAI bug Fixes
When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
Port init profile
Dual ToR Active-Standby | Additional MAC support
Work item tracking
Microsoft ADO (number only):
How I did it
Update SDK/FW/SAI make files
How to verify it
Run full sonic-mgmt regression on Mellanox platform
#### Why I did it
src/sonic-utilities
```
* d69432d1 - (HEAD -> 202211, origin/202211) [202211][db_migrator] Add migration of FLEX_COUNTER_DELAY_STATUS during 1911->2211 upgrade + fast-reboot. Add UT. (#2838) (34 hours ago) [Vadym Hlushko]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 859bd678 - (HEAD -> 202211, origin/202211) Fix error in peer response time when headroom is calculated for 800G (#2860) (2 days ago) [Stephen Sun]
* 5f294cf1 - [Dynamic Buffer][Mellanox] Skip PGs in pending deleting set while checking accumulative headroom of a port (#2871) (2 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 2da4286 - (HEAD -> 202211, origin/202211) Add new SSD type support (#390) (14 hours ago) [Junchao-Mellanox]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* 46b32daa - (HEAD -> 202211, origin/202211) [kdump] Fix API to read the current running image (#2217) (14 hours ago) [rajendra-dendukuri]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Fix some of the patches in .patches folder not applied issue.
The command "quilt applied" only lists the applied patches, if some of the patches have issues, then the patches will not be applied when you run the build command again.
Work item tracking
Microsoft ADO (number only): 24410730
How I did it
Run the command to apply the patches without any conditions.
If failed, check if the failure reason is "series fully applied".
How to verify it
#### Why I did it
src/sonic-utilities
```
* ec37e5d4 - (HEAD -> 202211, origin/202211) [Techsupport] Update the message seen during the lock acquisition failure (#2897) (10 days ago) [Vivek]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 63b08b59 - (HEAD -> 202211, origin/202211) [ASAN] Fix Indirect Mem Leaks in Orchagent (#2869) (2 days ago) [Vivek]
* 4248d01d - [muxorch] set mux state to init upon warm reboot (#2834) (5 days ago) [Nikola Dancejic]
* 3ca4b842 - Handle duplicate routes in a graceful manner (#2688) (5 days ago) [prabhataravind]
```
#### How I did it
#### How to verify it
#### Description for the changelog
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
fixes: https://github.com/sonic-net/sonic-buildimage/issues/16001
Caused by: https://github.com/sonic-net/sonic-buildimage/pull/15487
The above PR introduced change to use Management and Loopback Ipv4 and ipv6 addresses as snmpagent address in snmpd.conf file.
With this change, if Link local IP address is configured as management or Loopback IPv6 address, then snmpd tries to open socket on that ipv6 address and fails with the below error:
```
Error opening specified endpoint "udp6:[fe80::5054:ff:fe6f:16f0]:161"
Server Exiting with code 1
```
From RFC4007, if we need to specify non-global ipv6 address without ambiguity, we need to use zone id along with the ipv6 address: <address>%<zone_id>
Reference: https://datatracker.ietf.org/doc/html/rfc4007
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Modify snmpd.conf file to use the %zone_id representation for ipv6 address.
#### How to verify it
In VS testbed, modify config_db to use link local ipv6 address as management address:
"MGMT_INTERFACE": {
"eth0|10.250.0.101/24": {
"forced_mgmt_routes": [
"172.17.0.1/24"
],
"gwaddr": "10.250.0.1"
},
"eth0|fe80::5054:ff:fe6f:16f0/64": {
"gwaddr": "fe80::1"
}
},
Execute config_reload after the above change.
snmpd comes up and check if snmpd is listening on ipv4 and ipv6 addresses:
```
admin@vlab-01:~$ sudo netstat -tulnp | grep 161
tcp 0 0 127.0.0.1:3161 0.0.0.0:* LISTEN 274060/snmpd
udp 0 0 10.1.0.32:161 0.0.0.0:* 274060/snmpd
udp 0 0 10.250.0.101:161 0.0.0.0:* 274060/snmpd
udp6 0 0 fc00:1::32:161 :::* 274060/snmpd
udp6 0 0 fe80::5054:ff:fe6f::161 :::* 274060/snmpd -- Link local
admin@vlab-01:~$ sudo ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.250.0.101 netmask 255.255.255.0 broadcast 10.250.0.255
inet6 fe80::5054:ff:fe6f:16f0 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:6f:16:f0 txqueuelen 1000 (Ethernet)
RX packets 36384 bytes 22878123 (21.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 261265 bytes 46585948 (44.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
admin@vlab-01:~$ docker exec -it snmp snmpget -v2c -c public fe80::5054:ff:fe6f:16f0 1.3.6.1.2.1.1.1.0
iso.3.6.1.2.1.1.1.0 = STRING: "SONiC Software Version: SONiC.master.327516-04a6031b2 - HwSku: Force10-S6000 - Distribution: Debian 11.7 - Kernel: 5.10.0-18-2-amd64"
```
Logs from snmpd:
```
Turning on AgentX master support.
NET-SNMP version 5.9
Connection from UDP/IPv6: [fe80::5054:ff:fe6f:16f0%eth0]:44308
```
Ran test_snmp_loopback test to check if loopback ipv4 and ipv6 works:
```
./run_tests.sh -n vms-kvm-t0 -d vlab-01 -c snmp/test_snmp_loopback.py -f vtestbed.yaml -i ../ansible/veos_vtb -e "--skip_sanity --disable_loganalyzer" -u
=== Running tests in groups ===
Running: pytest snmp/test_snmp_loopback.py --inventory ../ansible/veos_vtb --host-pattern vlab-01 --testbed vms-kvm-t0 --testbed_file vtestbed.yaml --log-cli-level warning --log-file-level debug --kube_master unset --showlocals --assert plain --show-capture no -rav --allow_recover --ignore=ptftests --ignore=acstests --ignore=saitests --ignore=scripts --ignore=k8s --ignore=sai_qualify --junit-xml=logs/tr.xml --log-file=logs/test.log --skip_sanity --disable_loganalyzer
..
snmp/test_snmp_loopback.py::test_snmp_loopback[vlab-01] PASSED
```
<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
- [x] 202205
- [x] 202211
- [x] 202305
#### Tested branch (Please provide the tested image version)
<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->
- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
<!--
Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
src/sonic-platform-daemons
```
* 8ea4de3 - (HEAD -> 202211, origin/202211) [PSU power threshold] Fix logic error: compare the system power with the PSU's power threshold (#367) (2 days ago) [Stephen Sun]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* [yang] Change swss-event, dhcp-relay-event leafref to string (#13326)
Why I did it
Do not require leafref as part of yang. Only need string to compare whether string received from event matches what is possible for ifname.
How I did it
How to verify it
Run UT
* Add fix to monit_regex.json for catching mem_usage and cpu_usage (#14954)
Why I did it
Current regex not able to capture logs, modify regex to capture syslog messages
Work item tracking
Microsoft ADO (number only): 13366345
How I did it
Code change
How to verify it
sonic-mgmt test case
* Update usage leaf in sonic-events-host yang models (#15805)
#### Why I did it
event yang models for usage currently use int as type for usage leaf, needs to be of type decimal64
##### Work item tracking
- Microsoft ADO **(number only)**:17747466
#### How I did it
Update yang models and UT
#### How to verify it
UT
Why I did it
Use remote PR test template from sonic-mgmt master to run PR test.
How I did it
Modify PR test azure pipeline yml file.
How to verify it
PR test executing normally.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
#### Why I did it
src/sonic-utilities
```
* 9e8df7e5 - (HEAD -> 202211, origin/202211) [build] Fix dependency issue between responses and urllib3 package. (#2928) (#2929) (20 hours ago) [Liu Shilong]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 6ec611dc - (HEAD -> 202211, origin/202211) [202211][ppi]: Implement port bulk comparison logic (#2564) (#2821) (19 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
