- Why I did it
This new breakout mode is required when a QSFP cable is used on the QSFP-DD supported 4700 port. since QSFP only uses the first 4 lanes, this mode is required to restrict the child ports to only use the first four lanes
- How I did it
Updated the platfrom.json file with the extended data
- How to verify it
Tested on one port:
root@msn-4700:/home/admin# show int status
Interface Lanes Speed MTU FEC Alias Vlan Oper Admin Type Asym PFC
----------- ------------------------------- ------- ----- ----- ------- ------ ------ ------- ----------------------------------------------- ----------
Ethernet0 0 25G 9100 N/A etp1a routed up up QSFP28 or later N/A
Ethernet1 1 25G 9100 N/A etp1b routed down up N/A N/A
Ethernet2 2 25G 9100 N/A etp1c routed down up N/A N/A
Ethernet3 3 25G 9100 N/A etp1d routed down up N/A N/A
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
To support saithriftv2 build for bullseye dockers
- How I did it
Added the dependencies documented in the SAI docs and used in sonic-slave-buster
- How to verify it
Build saithriftv2 in the sonic-slave-bullseye
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Profiled the execution for the following cmd intfutil -c status
- How I did it
Cached the following information:
1. get_sonic_version_info()
2. get_platform_info()
None of the API exposed to the user libraries (for eg: sonic-utilities) has been modified
These methods involve reading text files or from redis. Thus, caching helped to improve the execution time
- How to verify it
Added UT's.
Verified on the device
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Update SDK/FW version - 4.5.2318/2010_2318 to pick up new fixes:
1. Cr space timeout on Hold and Release GW - at warm boot
2. Spectrum Port in stuck PHY_UP after peer side rebooted
3. Memory leak in sx_api_router_ecmp_update_set
- How I did it
Update the make file with the new version number
Update submodule Switch-SDK-drivers pointer
- How to verify it
Run sonic regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Replace swsssdk with swsscommon in alphanetworks devices code.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Replace swsssdk with swsscommon in alphanetworks devices code.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Replace swsssdk with swsscommon in centec devices.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Replace swsssdk with swsscommon in centec devices.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Remove unused swsssdk import from accton device code
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Remove unused swsssdk import from accton device code
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Currently the CLI commands show interface status show interface counters and show interface description displays Ethernet-IB and Ethernet-Rec ports in the output. These are internal ports should only be displayed when the option -d all is used for the above mentioned CLI commands
How I did it
Add the port roles Inb and Rec when classifing a port as internal port.
How to verify it
Verify the CLI output of the command show interface status doesnt display the Ethenet-IB and Ethernet-Rec port when -d all option in not present
Before
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Signed-off-by: maipbui maibui@microsoft.com
Why I did it
The xml.etree.ElementTree module is not secure against maliciously constructed data.
How I did it
Remove xml. Use lxml XML parsers package that prevent potentially malicious operation.
Why I did it
It solves a swss orchagent crash issue on PikeZ device, due to link-training setting of external PHY port.
How I did it
Catch up the fix for CS00012257483 in version 7.1.7.2.
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
The monit 'container_checker' fails in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
Why I did it
Migrate FRR to bullseye
How I did it
Makefile and docker config changes to refer to bullseye instead of buster.
How to verify it
Build bullseye frr docker.
Co-authored-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Why I did it
Change the path of sonic submodules that point to "Azure" to point to "sonic-net"
How I did it
Replace "Azure" with "sonic-net" on all relevant paths of sonic submodules
* draft upgrade to deb11 of syncd and syncd-rpc
* upgrade to python3
* revert workaround with libsaithrift
* Provide urls for sai and platform debs
* Downgrade python3 to python2
* Remove saithrift-patches
* Upgrade modules
* remove unnecessary lib
* remove more unnecessary modules
* Update sdk reference
* remove unnecessary packages from syncd-rpc
* [snmpd]: Update to 5.9+dfsg-4+deb11u1 to match Debian version
This brings in some security fixes.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update snmpd makefile
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove binNMU for snmpd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [Bgpcfgd] Enhance add_peer/add_peer_ipv6 unit tests
Why I did it
The current input to add_peer/add_peer_ipv6 is admin status change, update the UT to supply new peer information.
Current UT does not check for case when check_neig_meta is true, update UT to check for this case
How I did it
By changing the input to add_peer/add_peer_ipv6
By modifying load_constants/constructor to take constants path as an input, and add two UT that uses a version of constants.yml that sets check_neig_meta to true.
How to verify it
UT failing before the change, and passing after the change.
#### Why I did it
- Building `sonic-$PLATFORM.img.gz` fails if KVM support is not enabled.
- Repos have been transferred over from Azure to sonic-net domain
- sonic-net repos no longer use Microsoft CLA, so updated the README to point towards Linux foundation CLA
- p4 platform is no longer supported. Reference: https://github.com/sonic-net/sonic-buildimage/issues/2591#issuecomment-649425081
# Why I did it
platform-modules-belgite's deb requests linux-image-5.10.0-8-2-amd64-unsigned, which does not match the runtime kernel version
# How I did it
update the belgite's deb configuration in deb's control
# How to verify it
check the firsttime boot log in belgite platform
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Signed-off-by: maipbui <maibui@microsoft.com>
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
Replace unsafe functions to safe functions
#### How I did it
Replace `strtok()` by `strtok_r()`
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did:
In case of multi-asic platforms gbsyncd is not getting added to Feature Table of Host Config DB. Without this container_checker complains of not needed gbsyncd container's are running.
How I did:
Update Both Host and Namespace config db when gbsyncd docker is starting.
How I verify:
Verified on Multi-asic platforms.
Fix#10549Fix#10550
#### Why I did it
Create sonic yang model for SNMP
Tables:SNMP, SNMP_COMMUNITY
#### How I did it
Defined yang models based for SNMP based on snmp.yml
#### How to verify it
Added test cases to verify
Port index 22 is associated with phy23_config.json, then same port index 22 in phy24_config.json may cause gearbox port creation error. Port Ethernet22 maps to index 23.
Why I did it
This PR is to update Yang model for pfc_enable and pfcwd_sw_enable fields to support more than 2 queues, like 2,3,4,6.
Before this change, the regex "[0-7](,[0-7])?" accepts only no more than 2 queues.
How I did it
Update the regex pattern for pfc_enable and pfcwd_sw_enable, from "[0-7](,[0-7])?" to "[0-7](,[0-7])*
How to verify it
The change is verified by UT. The test input is updated to cover the change.
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py .
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Advance saibcm-modules-dnx
Change `sxdkernel start` to `sxdkernel restart`. If `syncd` service crashes in `ExecStartPre` systemd will not call `ExecStop` and thus will not call `sxdkernel stop`. Use of `sxdkernel restart` is more robust in terms of guarantees to restore the system after unexpected crashes.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
SN5600 has an additional service interface with a different parameters than other interfaces.
- How I did it
Added the etp65 interface with the correct parameters.
- How to verify it
Run platform test on SN5600 platform.
Check the service port can startup correctly.
* Add k8s master feature
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update kubernetes version mistake and make variable passing clear
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Add CRI-dockerd package
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update version variable passing logic
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Upgrade the worker kubernetes version
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Install xml file parse tool
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Generate the port configuration required 400G ZR port from minigraph.
How I did it
Add parse logic to get tx_power and laser_freq from LinkMetadata section of the minigraph.
Add UT for packet-chassis and voq chassis
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
bgp should be a per-asic service, and runs for each namespace on
multi-asic platforms. However, putting bgp in MULTI_INST_DEPENDENT
causes swss to be restarted as well as bgp. this is causing issues after #11000
Issue: #11653
This fix:
removes bgp from dependents list
adds a conditional that either adds bgp, or bgp@$DEV to separate
between single and multi-asic platforms
Why I did it
Update sonic-swss-common submodule to include events API that will be used to stream structured events
Contains only:
ecc13b2 2022-08-10 | APIs to support streaming structured events (https://github.com/sonic-net/sonic-buildimage/pull/667) [Zain Budhwani]
How I did it
Pull from latest commit in sonic-swss-common
How to verify it
Look at pointer for sonic-swss-common
- Add Watchdog remaining time API
- Add support for non-swappable fans via a FixedDrawer
- Add ASIC voltage tweaks for PikeZ product
- Add better pylint support
- Fix reboot-cause decision issue for future products
- Fix thermal issue for RJ45 ports
- Deprecate Catalina prototype support
- Why I did it
New SKU for MSN-4700 Platform i.e. Mellanox-SN4700-C128
Requirements:
* Breakout: Port 1-32: 4x100G
* Downlinks: 120 (1-30)
* Uplinks: 8 (31-32)
* Shared Headroom: Enabled
* Over Subscribe Ratio: 1:8
* Default Topology: T2
* Default Cable Length for T2: 1500m
* QoS params: The default ones defined in qos_config.j2 will be applied
* Small Packet Percentage: Used 50% for traditional buffer model Note: For dynamic model, the value defined in LOSSLESS_TRAFFIC_PATTERN|AZURE|small_packet_percentage is used
Additional Details:
Switch Type has to be programmed as SpineRouter through config_db.json in DEVICE_METADATA|localhost|type field for the buffer values & cable lengths defined in the buffers_defaults_t2.j2 to apply on the device
Cable Lengths Used for generating buffer_defaults_{t0,t1,t2}.j2 values
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
2 things are missing in current allow-prefix list implementation.
In some usecase, need to tell the BGP neighbor and have different allow-prefix list for different neighbors, which is not supported.
for the prefix list, can't support flexible le and ge.
How I did it
To enhance the bgp allow-prefix list feature to have:
To include the neighbor type info for the allow-prefix list.
To support flexible le and ge length for allow-prefix list.
How to verify it
4 new unit test cases are added in this PR to cover changes.
When using trap on SIGTERM the script will not react to the SIGTERM signal sent while a child is executing.
I.e, the following script does not react on SIGTERM sent to it if it is
waiting for sleep to finish:
```
trap "echo Handled SIGTERM" 0 2 3 15
echo "Before sleep"
sleep inf
echo "After sleep"
```
Instead, trap only on EXIT which covers also a scenario with exit on
SIGINT, SIGTERM.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
* Advance sonic-utilities pointer
7919077f Add FEC correctable and uncorrectable port stats (#2027)
ecb91367 Add CLI to configure YANG config validation (#2147)
e9ab5235 Add override testcase to verify removal (#2288)
c6794b55 Fix version in db_migrator for `PORT_QOS_MAP|global` (#2289)
92b889b7 [intfutil] Check whether the FEC mode is supported on the platform before configuring it to CONFIG_DB (#2223)
dab0d065 Transfer organization from Azure to sonic-net (#2284)
6de18a1d [watermarkstat] Fix CLI script for unconfigured PG counters (#2239)
ac2f5530 Improve the way to check port type of RJ45 port (#2249)
142185c9 Fix the issue that sonic_platform is not installed on vs image (#2300)
ca14133f [crm] add checking for CRM interval range (#2293)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Advance swss
dc8bc1c4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)
6565b502 Revert "[portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)" (#2396)
dc88d55d Revert hwinfo count change (#2383)
75fc9659 [DualToR] Handle race condition between tunnel_decap and mux orchestrator (#2397)
525a57fa Fix for remote system interface not getting created (#2364)
3161eaae portsorch: initial support for link-training (#2359)
dc477fb0 [swss/cfgmgr] teammgr configure lacp rate (#2121)
2489ad57 Improve pytest speend by grouping 20 tests together. (#2390)
168bd3b3 [EVPN]Modified tunnel creation logic when creating tunnel in VRF-VNI map creation flow (#2404)
1e1438e4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2400)
9f2e27b4 [QoS] Fix issue: the WRED profile can not be set if current min > new max or current max < new min (#2379)
d36c17d6 [asan][aclorch] fix a memory leak in the SaiAttrWrapper::swap() (#2382)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* More sonic-utilities PRs
be1866fd Fix GCU bug when backend service modifying config (#2295)
bcf36eb3 Fix issues for sonic_installer upgrade-docker and sonic_installer rollback-docker (#2278)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Add PSU input voltage and input current to mlnx platform api.
- How I did it
Implement 2 function of getting the psu voltage and psu current input:
Get the values from "power/psu{}_curr_in" , "power/psu{}_volt_in"
- How to verify it
Manual test.
Run sonic-mgmt regression
Signed-off-by: orfar1994 <orfar1994@gmail.com>
