Why I did it
This PR addresses the issue mentioned above by loading the acl config as a service on a storage backend device
How I did it
The new acl service is a oneshot service which will start after swss and does some retries to ensure that the SWITCH_CAPABILITY info is present before attempting to load the acl rules. The service is also bound to sonic targets which ensures that it gets restarted during minigraph reload and config reload
How to verify it
Build an image with the following changes and did the following tests
Verified that acl is loaded successfully on a storage backend device after a switch boot up
Verified that acl is loaded successfully on a storage backend ToR after minigraph load and config reload
Verified that acl is not loaded if the device is not a storage backend ToR or the device does not have a DATAACL table
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Update dynamic threshold to -1 to get optimal performance for RDMA traffic
How I did it
Modified pg_profile_lookup.ini to reflect the correct value
Signed-off-by: Neetha John <nejo@microsoft.com>
- Why I did it
Fixes#14236
When a redis event quickly gets outdated during port breakout, error logs like this are seen
Mar 8 01:43:26.011724 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': {'admin_status': 'down'}, 'Ethernet68': {'admin_status': 'down'}}}
Mar 8 01:43:26.012565 r-leopard-56 INFO ConfigMgmt: Writing in Config DB
Mar 8 01:43:26.013468 r-leopard-56 INFO ConfigMgmt: Write in DB: {'PORT': {'Ethernet64': None, 'Ethernet68': None}, 'INTERFACE': None}
Mar 8 01:43:26.018095 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Configure Ethernet64 admin status to down
Mar 8 01:43:26.018309 r-leopard-56 NOTICE swss#portmgrd: :- doTask: Delete Port: Ethernet64
Mar 8 01:43:26.018641 r-leopard-56 NOTICE lldp#lldpmgrd[32]: :- pops: Miss table key PORT_TABLE:Ethernet64, possibly outdated
Mar 8 01:43:26.018654 r-leopard-56 ERR lldp#lldpmgrd[32]: unknown operation ''
- How I did it
Only log the error when the op is not empty and not one of ("SET" & "DEL" )
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
fa8b709 Handled the error case of negative age (#57)
990f5b0 Use github code scanning instead of LGTM (#55)
a7992c5 Install libyang for swss-common. (#50)
244fa86 Update README.md
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Sometimes Nvidia watchdog device isn't ready when watchdog-control service is up after first installation from ONIE
need to delay watchdog control service to go up after hw-mgmt which gets devices up and ready
- How I did it
Delay Nvidia watchdog-control service before hw-mgmt has started on Mellanox platform in order to avoid missing or not ready watchdog device.
- How to verify it
verification test of ONIE installation of image in a loop
making sure watchdog service is always up (not failed) after first installation from ONIE
- Why I did it
Healthd check system status every 60 seconds. However, running checker may take several seconds. Say checker takes X seconds, healthd takes (60 + X) seconds to finish one iteration. This implementation makes sonic-mgmt test case not so stable because the value X is hard to predict and different among different platforms. This PR introduces an interval
compensation mechanism to healthd main loop.
- How I did it
Introduces an interval compensation mechanism to healthd main loop: healthd should wait (60 - X) seconds for next iteration
- How to verify it
Manual test
Unit test
Why I did it
Add interface-id in dhcpv6-relay yang model
How I did it
Add interface-id option and corresponding UT. Updated configuration.md
How to verify it
kellyyeh@kellyyeh:~/sonic-buildimage/src/sonic-yang-models$ pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-dhcpv6-relay.yang
Why I did it
To enhance pddf_eeprom.py to use caching and fix#13835
How I did it
Utilising the in-built caching mechanism in the base class eeprom_base.py.
Adding a cache file to store the eeprom data.
How to verify it
By running 'decode-syseeprom' or 'show platform syseeprom' commands.
Why I did it
To enable FPGA support in PDDF.
How I did it
Added FPGAI2C and FPGAPCI in the build path for the PDDF debian package
Added the support for FPGA access APIs in the drivers of fan, xcvr, led etc.
Added the FPGA device creation support in PDDF utils and parsers
How to verify it
These changes can be verified on some platform using such FPGAs. For testing purpose, we took Dell S5232f platform and brought it up using PDDF. In doing so, FPGA devices are created using PDDF and optics eeproms were accessed using common FPGA drivers. Below are some of the logs.
Why I did it
Add 'channel' to the CONFIG_DB PORT table. This will be needed to support PORT breakout to multiple channel ports so that Xcvrd can understand which datapath or channel to initialize on the CMIS compliant optics
How I did it
Add 'channel' to the CONFIG_DB PORT table.
How to verify it
Added unit test for valid and invalid channel number
Channel 0 -> No breakout
Channel 1 to 8 -> Breakout channel 1,2, ..8
Signed-off-by: Prince George <prgeor@microsoft.com>
- Why I did it
To include latest fixes:
Fix traffic loss on all routed traffic when moving from 4.4.3372/XX_2008_3388 to 4.5.4118-012/XX_2010_4120-010. Issue occurred after ISSU process in Spectrum 1 only, When upgrading from older version to a new one. Neighbor entries are overwritten.
Fix When using mirror session policer on SPC2/3, the actual CIR was 1.28 times more than the configured CIR value.
Fix Creation of router interface of type bridge may occasionally fail if create is performed immediately after delete.
Fix False errors during SDK deinitialization may be seen in the syslog
- How I did it
Updated SDK submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
- Why I did it
Add Secure Boot support to SONiC OS.
Secure Boot (SB) is a verification mechanism for ensuring that code launched by a computer's UEFI firmware is trusted. It is designed to protect a system against malicious code being loaded and executed early in the boot process before the operating system has been loaded.
- How I did it
Added a signing process to sign the following components:
shim, grub, Linux kernel, and kernel modules when doing the build, and when feature is enabled in build time according to the HLD explanations (the feature is disabled by default).
- How to verify it
There are self-verifications of each boot component when building the image, in addition, there is an existing end-to-end test in sonic-mgmt repo that checks that the boot succeeds when loading a secure system (details below).
How to build a sonic image with secure boot feature: (more description in HLD)
Required to use the following build flags from rules/config:
SECURE_UPGRADE_MODE="dev"
SECURE_UPGRADE_DEV_SIGNING_KEY="/path/to/private/key.pem"
SECURE_UPGRADE_DEV_SIGNING_CERT="/path/to/cert/key.pem"
After setting those flags should build the sonic-buildimage.
Before installing the image, should prepared the setup (switch device) with the follow:
check that the device support UEFI
stored pub keys in UEFI DB
enabled Secure Boot flag in UEFI
How to run a test that verify the Secure Boot flow:
The existing test "test_upgrade_path" under "sonic-mgmt/tests/upgrade_path/test_upgrade_path", is enough to validate proper boot
You need to specify the following arguments:
Base_image_list your_secure_image
Taget_image_list your_second_secure_image
Upgrade_type cold
And run the test, basically the test will install the base image given in the parameter and then upgrade to target image by doing cold reboot and validates all the services are up and working correctly
Why I did it
Upgrade SAI XGS version to 8.4.0.2 and migrate to DMZ repo.
How I did it
Update SAI XGS version in sai.mk.
How to verify it
Run the SONiC and SAI test with the SAI pipeline.
Signed-off-by: zitingguo-ms zitingguo@microsoft.com
Update sonic-swss-common submodule pointer to include the following:
23df338 [ci] Continue on error when running test. (#757)
06ffb51 Define ACL_TABLE and ACL_RULE table in STATE_DB (#748)
1b369ab [ci] Fix apt-get install unable locate package issue. (#753)
619d4ec Improve unit test for go wrapper (#752)
Provide platform-components.json for Clearwater2 and Wolverine
These files are needed for fwutil platform sonic-mgmt tests to pass.
Fix PikeZ platform_components.json
Co-authored-by: Patrick MacArthur <pmacarthur@arista.com>
Co-authored-by: Andy Wong <andywong@arista.com>
Why I did it
After the renaming of the asic_port_name in port_config.ini file (PR: #13053 ), the asic_ifname in port_config.ini is changed from '-ASIC<asic_id>' to just port. Example: 'Eth0-ASIC0' to 'Eth0'.
However, with this change a config_db generated via config load_minigraph would cause the EVERFLOW and EVERFLOWV6 tables under ACL_TABLE to not have any of non-LAG front panel interfaces. This was causing the EVERFLOW suite to fail.
How I did it
In parse_asic_external_neigbhors in minigraph.py there was a check that the asic_name.lower() (like asic0) is present in the port_alias_asic_map. However with -ASIC removed from the asic_ifname, the port_alias_asic_map would not have the asic_name and thus any non-LAG neighbor would not be included.
Fix was the ignore the asic name change as the port_alias_asic_map is already only looking for ports in just the same asic as asic_name.
How to verify it
Execute "config load_minigraph" with the mingraph which is generated by sonic-mgmt gen-minigraph script. And confirm ono-lag interface are present in the Everfloe table in the config_dbs.
Signed-off-by: mlok <marty.lok@nokia.com>
reverted because the submodule update PR needs to be merged with the following PR
#14200 but the PR is not available due to some failures and having only sairedis PR will break fast-boot
Update sonic-swss-common submodule pointer to include the following:
565ad4b Fix common path issue (#751)
3352881 Prevent sonic-db-cli generate core dump (#749)
43cadec Add ProfileProvider class to support read profile config from PROFILE_DB. (#683)
8b09f90 Update path to sairedis tests (#747)
85f3776 Non recursive automake and Debian packaging changes (#700)
This is a reland of #13950, with the debug image build fix.
Why I did it
Semgrep check has some issues. Ignore it.
check automerge label.
Ignore Azure.sonic-buildimage sub test jobs. Only check final result.
How I did it
#### Why I did it
update contains following commits
50123ef Zain Budhwani Tue Feb 28 16:48:22 2023 -0800 Add logs for md5 checksum (sonic-net/sonic-gnmi#80)
a90f2b3 Zain Budhwani Mon Feb 27 23:44:49 2023 -0800 Add get-update to azp yml (sonic-net/sonic-gnmi#79)
14fe6f4 Zain Budhwani Tue Jan 31 14:11:27 2023 -0800 Add 202012 branch to pr checker (sonic-net/sonic-gnmi#72)
a792474 Zain Budhwani Tue Jan 31 09:22:38 2023 -0800 Fix crash when retrieving cpu utilization (sonic-net/sonic-gnmi#70)
#### How I did it
Fetch new changes
Why I did it
Dhcpmon had incorrect RX count for server side packets. It does not raise any false alarms, but could miss catching server side packet count mismatch between snapshot and current counter.
Add debug mode which prints counter to syslog
How I did it
Due to dualtor inbound filter requirement, there are currently two filters, each for listening to rx / tx packets.
Originally, we opened up an rx/tx socket for each interface specified, which causes duplicate socket. Now we initialize the sockets only once. Both sockets are not binded to an interface, and we use vlan to interface mapping to filter packets. For inbound uplinks, we use a portchannel to interface mapping.
Previous dhcpmon counter before dual tor change:
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ eth0- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
Dhcpmon counter after this PR:
[ PortChannel104- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel103- Current rx/tx] Discover: 0/ 1, Offer: 0/ 0, Request: 0/ 3, ACK: 0/ 0
[ PortChannel102- Current rx/tx] Discover: 0/ 2, Offer: 1/ 0, Request: 0/ 6, ACK: 1/ 0
[ PortChannel101- Current rx/tx] Discover: 0/ 0, Offer: 0/ 0, Request: 0/ 0, ACK: 0/ 0
[ Vlan1000- Current rx/tx] Discover: 1/ 0, Offer: 0/ 1, Request: 3/ 0, ACK: 0/ 1
[ Agg-Vlan1000- Current rx/tx] Discover: 1/ 4, Offer: 1/ 1, Request: 3/ 12, ACK: 1/ 1
How to verify it
Ran dhcp relay test to send all four packets in singles and batches on both single ToR and dual ToR. Counter was as expected.
- Why I did it
In sfplpm API, the number of logical ports is hardcoded as 64. When a system contains more port than this, the SDK APIs would fail with a syslog as below
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [MGMT_LIB.ERR] Slot [0] Module [0] has logport [0x00010069] in enabled state
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [SDK_MGMT_LIB.ERR] Failed in __sdk_mgmt_phy_module_pwr_attr_set, error: Internal Error
Mar 7 03:53:58.106118 r-leopard-58 ERR pmon#-c: Error occurred when setting power mode for SFP module 0, slot 0, error code 1
- How I did it
Remove the hardcoded value of 64. Obtained the number of logical ports from SDK
- How to verify it
Manual testing
Why I did it
Add yang model definition for CHASSIS_MODULE define and implemented for sonic chassis. HLD for this configuration is included in https://github.com/sonic-net/SONiC/blob/master/doc/pmon/pmon-chassis-design.md#configurationFixes#12640
How I did it
Added yang model definition, unit tests, sample config and documentation for the table
How to verify it
Validated config tree generation using "pyang -Vf tree -p /usr/local/share/yang/modules/ietf ./yang-models/sonic-voq-inband-interface.yang"
Built the below python-wheels to validate unit tests and other changes
target/python-wheels/bullseye/sonic_yang_mgmt-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_yang_models-1.0-py3-none-any.whl
target/python-wheels/bullseye/sonic_config_engine-1.0-py3-none-any.whl
Why I did it
Currently the show and clear cli of dhcp_relayis may cause confusion.
How I did it
Add doc for it: [doc] Add docs for dhcp_relay show/clear cli sonic-utilities#2649
Add dhcp_relay config cli and test cases.
show dhcp_relay ipv4 helper
show dhcp_relay ipv6 destination
show dhcp_relay ipv6 counters
sonic-clear dhcp_relay ipv6 counters
How to verify it
Unit test all passed
Fixes#13568
Upgrade from old image always requires squashfs mount to get the next image FW binary. This can be avoided if we put FW binary under platform directory which is easily accessible after installation:
admin@r-spider-05:~$ ls /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
/host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
admin@r-spider-05:~$ ls -al /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa
lrwxrwxrwx 1 root root 66 Feb 8 17:57 /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa -> /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
- Why I did it
202211 and above uses different squashfs compression type that 201911 kernel can not handle. Therefore, we avoid mounting squashfs altogether with this change.
- How I did it
Place FW binary under /host/image-/platform/mlnx/, soft links in /etc/mlnx are created to avoid breaking existing scripts/automation.
/etc/mlnx/fw-SPCX.mfa is a soft link always pointing to the FW that should be used in current image
mlnx-fw-upgrade.sh is updated to prefer /host/image-/platform/mlnx location and fallback to /etc/mlnx in squashfs in case new location does not exist. This is necessary to do image downgrade.
- How to verify it
Upgrade from 201911 to master
master to 201911 downgrade
master -> master reboot
ONIE -> master boot (First FW burn)
Which release branch to backport (provide reason below if selected)
It will allow us to have application called "mergecap" - which can merge multiple .pcap files into single .pcapng file and convert it to .pcap file
Signed-off-by: Petro Pikh <petrop@nvidia.com>
Why I did it
submodule advance for master branch
309df59 - Revert "[aclorch] Fixed issue [Mellanox] Update SDK to v4.2.9102 #2204.Support IN_PORTS qualifer in MIRRORV6 table. (Cmd "config vlan member add <vid> <interface_name>" always adds interface as tagged #2668)" (Add warm/fast-boot feature processing for wedge100bf_32x/65x platforms #2687) (85 minutes ago) [StormLiangMS]
ebe8de7 - [FDB]Fixing FDB consolidated flush for Remote MACs (pmon to stretch #2673) (2 days ago) [Sudharsan Dhamal Gopalarathnam]
c9ae6aa - Fix issue: there is no retry while creating a RIF which is in removing state ([201811 sub-module] advance sub-modules: utilities, swss, swss-common #2679) (2 days ago) [Junchao-Mellanox]
79afcb3 - [Dual-ToR] handle 'mux_tunnel_egress_acl' attrib in order to change ACL configuration (drop on ingress/egress) on standby ToR (lm75 doesn't support written alarm to syslog. #2646) (3 days ago) [Andriy Yurkiv]
c2b01ba - [orchagent]: Get bridge port ID from orchagent cache instead of SAI API ([201811 sub module] advance sairedis sub module #2657) (3 days ago) [Lawrence Lee]
d8a1cb7 - [dualtor] Fix neighbor miss when mux is not ready ([mellanox] Fix in mlnx-ffb.sh #2676) (3 days ago) [Longxiang Lyu]
1531dff - [ci] Fix pipeline error about team5 not found. (Core dump in orchagent when assigning router interface to a vlan with untagged mode #2684) (4 days ago) [Liu Shilong]
cfcd40c - [aclorch] Fixed issue [Mellanox] Update SDK to v4.2.9102 #2204.Support IN_PORTS qualifer in MIRRORV6 table. (Cmd "config vlan member add <vid> <interface_name>" always adds interface as tagged #2668) (4 days ago) [Rajkumar-Marvell]
35a7ab0 - swss: Fix Invalid port oid messages generated because of voq counters. (Failed to update FlexCounter, Segmentation fault #2653) (8 days ago) [Sambath Kumar Balasubramanian]
How I did it
How to verify it
run PR test
Why I did it
Vendor platform may require running platform specific pre-shutdown routine before shutting down the syncd process which runs the SAI and vendor sdk instance.
How I did it
Added a platform script hook which will be executed if the plugin script is provided by the platform in device//plugins/
Why I did it
[Build] Support to use loosen version when failed to install python packages
It is to fix the issue #14012
How I did it
Try to use the installation command without constraint
How to verify it
Fixing issue https://github.com/sonic-net/sonic-buildimage/issues/13983
#### Why I did it
Added Missing fields in sonic-portchannel yang model.
"fallback" and "fast_rate" fields are present in configuration schema but not in yang model. This leads to traceback when yang is validated
sonic_yang(3):All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
sonic_yang(3):exceptionList:["'fast_rate'"]
sonic_yang(3):Data Loading Failed:All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
Data Loading Failed
All Keys are not parsed in PORTCHANNEL
dict_keys(['PortChannel100'])
exceptionList:["'fast_rate'"]
ConfigMgmt Class creation failed
Failed to break out Port. Error: Failed to load the config. Error: ConfigMgmtDPB Class creation failed
#### How I did it
Updated yang model
#### How to verify it
Added tests to verify
#### Link to config_db schema for YANG module changes
Part of the PR
- Why I did it
To optimize Mellanox platform build
- How I did it
sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
sx kernel is downloaded as zip from Spectrum-SDK-Drivers
- How to verify it
configure/build for Mellanox platform
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Reverts #13950
libswsscommon-dbg_1.0.0_amd64.deb package is not built in new submodule HEAD.
PR validation passed because it didn't build debug image.
13950 breaks debug image build.
Why I did it
SONiC related packages shouldn't be intalled from Pypi.
It is security compliance requirement.
How I did it
Check SONiC related packages when using setup.py.
How to verify it
Why I did it
Platform cases test_tx_disable, test_tx_disable_channel, test_power_override failed in dx010.
How I did it
Add i2c access algorithm for CPLD i2c adapters.
How to verify it
Verify it with platform_tests/api/test_sfp.py::TestSfpApi test cases.
