Fix hostcfgd so that changes to the "FEATURE" table in ConfigDB are properly handled. Three changes here:
1. Fix indenting such that the handling of each key actually occurs in the for key in status_data.keys(): loop
2. Add calls to sudo systemctl mask and sudo systemctl unmask as appropriate to ensure changes persist across reboots
3. Substitute returns with continues so that even if one service fails, we still try to handle the others
Note that the masking is persistent, even if the configuration is not saved. We may want to consider only calling systemctl enable/disable in hostcfgd when the DB table changes, and only call systemctl mask/unmask upon calling config save.
This change allows the recursive `git clean` and `git reset` commands to continue even if they encounter an error in one of the submodules. Previously, if an error was encountered, the operation would terminate with a message similar to the following:
Stopping at 'src/sonic-mgmt-framework'; script returned non-zero status.
* Update sonic-sairedis (sairedis with SAI 1.6 headers)
* Update SAIBCM to 3.7.4.2, which is built upon SAI1.6 headers
* missed updating BRCM_SAI variable, fixed it
* Update SAIBCM to 3.7.4.2, updated link to libsaibcm
* [Mellanox] Update SAI (release:v1.16.3; API:v1.6)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
* Update sonic-sairedis pointer to include SAI1.6 headers
* [Mellanox] Update SDK to 4.4.0914 and FW to xx.2007.1112 to match SAI 1.16.3 (API:v1.6)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
* ensure the veth link is up in docker VS container
* ensure the veth link is up in docker VS container
* [Mellanox] Update SAI (release:v1.16.3.2; API:v1.6)
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
* use 'config interface startup' instead of using ifconfig command, also undid the previous change'
Co-authored-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
This changes is needed to support parallel build Jobs.
Made LIBYANG_PY2 and LIBYANG_PY3 depend on LIBYANG and LIBYANG_CPP. Also LIBYANG_CPP depends on LIBYANG.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
Images built from master branch and installed on devices where we mount /var/lib/docker in RAM (because the HDD is small) were failing to boot properly. The Docker service failed to start because /var/lib/docker was filled to 100%. This is due to the increase in total number of containers in the image.
As of today, /var/lib/docker contains 1.3 GB of data. Therefore, this PR increases the size of the ramdisk to 1.5 GB to accommodate all the containers. Example output below from an Arista-7050-QX32 SKU:
```
admin@sonic:~$ df -h
Filesystem Size Used Avail Use% Mounted on
...
tmpfs 1.5G 1.3G 172M 89% /var/lib/docker
...
```
Changes:
-- Removing the part where build dependencies are installed in setup.py.
-- Adding build dependencies in corresponsing rules\..*.mk file.
Signed-off-by: Praveen Chaudhary pchaudhary@linkedin.com
- Skip thermalctld in DellEMC S6000, S6100, Z9100 and Z9264 platforms.
- Change the return type of thermal Platform APIs in DellEMC S6000, S6100, Z9100 and Z9264 platforms to 'float'.
* [platform]: Add a new supported platform, Delta-agc032
Switch Vendor: Delta
Switch SKU: Delta-agc032
CPU: BROADWELL-DE
ASIC Vendor: Broadcom
Switch ASIC: Tomahawk3, BCM56980
Port Configuration: 32x400G + 2x10G
- What I did
Add a new Delta platform Delta-agc032.
- How I did it
Add files by following SONiC Porting Guide.
- How to verify it
1. decode-syseeprom
2. sensors
3. psuutil
4. sfputil
5. show interface status
6. bcmcmd
Signed-off-by: zoe-kuan <ZOE.KUAN@deltaww.com>
**- Why I did it**
Advance sonic-py-swsssdk submodule to fix#4632
**- How I did it**
In py3, the response from redis connector is encoded as byte array. They
need to be decoded before accessing them as strings.
Use following commands to test
sonic-db-cli CONFIG_DB "keys *"
sonic-db-cli CONFIG_DB "hget PORT|Ethernet0 admin_status"
**- How to verify it**
sonic-db-cli CONFIG_DB "keys *"
sonic-db-cli CONFIG_DB "hget PORT|Ethernet0 admin_status"
Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
3y Power YPEB-1200am PSU doens't support read fan_dir from pmbus register
Check with vendor this PUS type only support F2B fan direction. So add to show "F2B"
when red psu_fan_dir sysfs.
* Trigger thermal action log only if thermal condition changes
* test file existence before read file content
* fix error for set psu fan speed
* Remove logs because it print too frequently
1. On the ARM architecture, python-j2cli is installed from source code, depends on python-setuptools and python-wheel.
2. On the ARM architecture, install python-cryptography from source code(from azure-storage==0.36.0) depends on libffi-dev and libssl-dev.
3. install crossbuild in buster slave for arm arch kernel compile.
4. Versions before 18.09 do not install docker-ce-cli.
5. umount /proc after dockerfs.
6. change image apt source list from stretch to buster for arm.
Added support for S6000 new HWSKU-Q20S48
Modified port_config.ini, TD2 settings to bring the ports UP.
Added support for S6000 new HWSKU-Q20S48(20x40G-48x10G)
This HWSKU is applicable for S6000 platform, not S6000-ON platform
