frr does not advertise route if local route is not reachable, as a result
loopback route /64 is not advertised to the neighbors. Add static route
allows frr to advertise the route to its peers
Signed-off-by: Guohan Lu <lguohan@gmail.com>
swss/teamd/syncd services were changed to always enabled
in commit fad481edc1 as a workaround
for not letting hostcfgd start service during the bootup process.
commit 317a4b3410 introduce
wait till full system bootup before updating feature states in hostcfgd.
Thus, workaround introduced in commit fad481ed can be removed
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
python2 is end of life and SONiC is going to support python3. This PR is going to support:
1. Build pmon daemons with python3
2. Install and run python3 version pmon daemons
**- How I did it**
1. Change pmon daemons make files to build bothe python2 and python3 whl
2. Change docker-platform-monitor make files to install both python2 and python3 whl
3. Change pmon docker startup files to start pmon daemons according to the supported platform API version
Introduce tunnel manager daemon. Start the process as part of swss container
Submodule update for swss:
9ed3026 - 2020-12-24 : [NAT] ACL Rule with DO_NOT_NAT action is getting failed. (#1502) [Akhilesh Samineni]
c39a4b1 - 2020-12-23 : Mux/IPTunnel orchagent changes (#1497) [Prince Sunny]
bc8df0e - 2020-12-23 : Add support for headroom pool watermark (#1567) [Neetha John]
- add config option ENABLE_DOCKER_BASE_PULL to pull sonic-slave docker from registry
- use REGISTRY_PORT, REGISTRY_SERVER to specify docker registry
Signed-off-by: Guohan Lu <lguohan@gmail.com>
**- Why I did it**
As part of migrating SONiC codebase from Python 2 to Python 3
**- How I did it**
- No longer install Python 2 in docker-base-buster or docker-config-engine-buster.
- Install Python 2 and pip2 in the following containers until we can completely eliminate it there:
- docker-platform-monitor
- docker-sonic-mgmt-framework
- docker-sonic-vs
- Pin pip2 version <21 where it is still temporarily needed, as pip version 21 will drop support for Python 2
- Also preform some other cleanup, ensuring that pip3, setuptools and wheel packages are installed in docker-base-buster, and then removing any attempts to re-install them in derived containers
for exmaple, for arm64, the sonic-slave docker image name
is sonic-slave-arm64-$(USER)
for amd64, the docker image is kept as it is
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Why I did it
scripts/collect_host_image_version_files.sh fails with below error:
scripts/collect_host_image_version_files.sh target ./fsroot
/usr/sbin/chroot: failed to run command 'post_run_buildinfo': No such file or directory
/bin/cp: cannot stat './fsroot/usr/local/share/buildinfo/post-versions': No such file or directory
- How I did it
Issues is because qemu-arm-static is removed before this step. So, I moved the cleanup step to the end.
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
Y* profile is the name pattern for p4 programs that developed for the current platform. The difference between them is features enabled and resource reservation.
For this platform, it is expected to work on any Y profile. but after the latest changes, the first Y profile is always used.
Changes:
-- Add Default value for leaf-lists in ACL and portchannel.
-- Remove members in VLAN.
-- Test modifications.
Signed-off-by: Praveen Chaudhary<pchaudhary@linkedin.com>
To limit IO and space usage on the flash device the boot0 script makes sure the SWI is in memory.
Because SONiC maps /tmp on the flash, some logic is required to make sure of it.
However it is possible for some provisioning mechanism to already download the swi in a memory file system.
This case was not handled properly by the boot0 script.
It now detect if the image is on a tmpfs or a ramfs and keep it there if that is the case.
The cleanup method has been updated accordingly and will only cleanup
the mount path if it's below /tmp/ as to not affect user mounted paths.
- How I did it
Check the filesystem on which the SWI pointed by swipath lies.
If this filesystem is a ramfs or a tmpfs the move_swi_to_tmpfs becomes a no-op.
Made sure the cleanup logic would not behave unexpectedly.
- How to verify it
In SONiC:
Download the swi under /tmp and makes sure it gets moved to /tmp/tmp-swi which gets mounted for that purpose.
Make sure /tmp/tmp-swi gets unmounted once the install process is done.
Create a new mountpoint under /ram using either ramfs or tmpfs and download the swi there.
Install the swi using sonic-installer and makes sure the image doesn't get moved by looking at the logs.
* src/sonic-swss c7ee75f...cadf28f (24):
> Revert "Add support for headroom pool watermark (#1453)"
> [VxlanOrch] pytest for EVPN VXLAN (#1318)
> [restore_neighbors] python3 support for restore_neighbors.py (#1542)
> [buffermgmt] more build error fixes when compiling for armhf (32-bit) (#1559)
> Sflow fix to avoid NULL in field. (#1531)
> [fgnhgorch] Fg Nhg link handling (#1537)
> [dpb]: make sure port is in admin down state before remove port. (#1513)
> [FPMSYNCD/FDBSYNCD] EVPN Type-5 route removing prefix-len for host route and removing junk character present in the mac (#1553)
> Added support for EVPN L3 VXLAN as described in the PR Azure/SONiC#437 (#1267)
> [crm]: Typecast to unit64_t to avoid divide by 0 during overflow (#1550)
> [vxlanmgr] Fix build error when compiling for armhf (32-bit) (#1552)
> [Dynamic buffer calc] Support dynamic buffer calculation (#1338)
> [dvs] Clean-up dvs_database and dvs_common (#1541)
> [VxlanMgr] changes for EVPN VXLAN (#1266)
> Statistics support for Tx and Rx counters of different frame sizes (#1536)
> [orchagent/phy]: Add firmware info propagation (#1540)
> [vxlanorch] Use PRI instead of %l to avoid warnings in 32-bit arch (#1539)
> [FDBSYNCD] Added support for EVPN as described in the PR Azure/SONiC#437 (#1276)
> [everflow] Add retry mechanism for mirror sessions and policers (#1486)
> Enable ACL table type mirror_v6 for Innovium Platform (#1527)
> [fgnhgorch] Change format specifier %lu to %zu for size_t (#1529)
> [dvs] Fix issue where concurrent netns operations cause test setup to fail (#1535)
> Add support for headroom pool watermark (#1453)
> Change gAsicInstance to type string with max length limit (#1526)
importlib-resources v4.0.0 was released today (2020-12-23) and drops support for Python 2. This caused the sonic-config-engine Python 2 wheel build to fail.
Reference: https://pypi.org/project/importlib-resources/
Pin 'importlib-resources' package to v3.3.1 for Python 2
Unrelated: remove pinned version of zipp for sonic-bgpcfgd because we no longer build a Python 2 version of that package
Signed-off-by: Prabhu Sreenivasan prabhu.sreenivasan@broadcom
What I did
Added support for snat, dnat and ipmc resources under CRM module.
How I did it
New feature NAT adds new resources snat_enty and dnat_entry that needs to be monitored. ipmc_entry tracks IP multicast resources used by switch.
How to verify it
sonic-utilities tests and crm spytest
* First cut image update for kubernetes support.
With this,
1) dockers dhcp_relay, lldp, pmon, radv, snmp, telemetry are enabled
for kube management
init_cfg.json configure set_owner as kube for these
2) Each docker's start.sh updated to call container_startup.py to register going up
As part of this call, it registers the current owner as local/kube and its version
The images are built with its version ingrained into image during build
3) Update all docker's bash script to call 'container start/stop/wait' instead of 'docker start/stop/wait'.
For all locally managed containers, it calls docker commands, hence no change for locally managed.
4) Introduced a new ctrmgrd service, that helps with transition between owners as kube & local and carry over any labels update from STATE-DB to API server
5) hostcfgd updated to handle owner change
6) Reboot scripts are updatd to tag kube running images as local, so upon reboot they run the same image.
7) Added kube_commands.py to handle all updates with Kubernetes API serrver -- dedicated for k8s interaction only.
- Why I did it
Latest master image crashes when loading minigraph
Fixing #6265
- How I did it
Avoid converting 'None' to ipaddress.
- How to verify it
On a system crashing with the issue, manually patch minigraph.py with the change in PR and load minigraph succeeded.
Signed-off-by: Ying Xie ying.xie@microsoft.com
Added source interface support for NTP.
Also made NTP start on Mgmt-VRF by default when configured.
**- How I did it**
1) Updated hostcfg to listen to global config NTP and NTP_SERVER tables and restart ntp when ever the configuration changes. NTP table includes source interface configuration.
2) The ntp script updated to by default start on Mgmt-VFT when configured.
Signed-off-by: Prabhu Sreenivasan <prabhu.sreenivasan@broadcom>
* [Mellanox] Update SAI to 1.18.0
* [Mellanox] Update SDK to 4.4.2112
* Updated Mellanox SAI to 1.18.0.2
* Updated bcmsai debians to use SAI 1.7.1
* Updated Mellanox to use SAI 1.7.1
* Updated submodule sonic-sairedis using SAI 1.7.1
Co-authored-by: Vineet Mittal <vmittalmittal@microsoft.com>
Co-authored-by: Nazarii Hnydyn <nazariig@nvidia.com>
[vs] Add workaround for clean up macsec ports (#752)
[logfile]: Add handling of Sairedis rec filename (#747)
Update README.md
[meta] Fix stat_mode enums to sai_bulk_op_error_mode_t (#753)
[syncd][tests] Add syncd deprecated attribute value test (#751)
[vs] Skip MACsec clean up if /sbin/ip is not accessible (#750)
Configure enable -Wcast-align=strict when supported by compiler (#749)
[syncd] Translate depreacated attr enum values to new ones (#746)
[sairedis]vs SAI support for voq neighbor (#725)
[syncd] Translate removed RIDs in fdb notification (#734)
[syncd] Move syncd classes to syncd namespace (#742)
[vs] Use /sbin/ip absolute path for ip command in MACsecManager (#744)
[saidiscovery] Update saidiscovery to use VendorSai object and metadata (#736)
Remove Winline warning since it depends on external headers (#741)
[meta] Enable strict cast-align warning (#738)
[vs] Use meta class instead info when using unittests (#740)
[vs] Support flush entry type all on virtual switch (#735)
[vslib]: Add MACsec state to state base (#722)
[README.md] Update installation steps (#730)
Switch Capability support (#728)
[vs] Fail switch create when warm boot requested and no warm boot state (#739)
Dynamic Port breakout fix the crash, port down event processing after<80> (#727)
Code clean (#721)
Signed-off-by: Sabareesh Kumar Anandan <sanandan@marvell.com>
- Why I did it
In some build machine, it may be not able to run as root during the build, only has root authority in docker containers.
- How I did it
Remove the sudo in Makefile
- How to verify it
cd src/sonic-build-hooks
make all
Certain platform specific packages sonic-platform-xyz, installs files onto rootfs, which would be placed on read-write mount path on /host/image-name/rw/...
when ntpd starts it tries to do read access on /usr/bin /usr/sbin/ /usr/local/bin , which inturn links further to the read-write mount path also.
Where ntpd would get below Apparmor Warning message
LOG:-
audit: type=1400 audit(1606226503.240:21): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/local/bin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1606226503.240:22): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/sbin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1606226503.240:23): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/image-HEAD-dirty-20201111.173951/rw/usr/bin/" pid=3733 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Fix:
Add rw/.. mount path similar to root path access provided for ntpd in /etc/apparmor.d/usr.sbin.ntpd
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
bug fix: #5914
Validated for tx_disable function of SFP+ on AS7312-54X, AS5812-54X, AS5712-54x, and AS5812-54x.
Signed-off-by: roy_lee <roy_lee@edge-core.com>
