### Why I did it
### How I did it
Fix regex such that dhcp bind failure event is detected as well as process name since dhcp relay processes that need to be detected are dhcprelay6 and dhcrelay.
#### How to verify it
Manual testing and nightly test event
Microsoft ADO (25266920)
sonic-mgmt xoff test was failing for [100g,120km]. Needed to update total headroom pool size when 100G line card is used as T2 uplink.
This size was calculated assuming 100g is used for downlink so cable length was 2km whereas it can also be used for uplink (cable length - 120km). so we need to do calculation based on 120km not 2km. Although it will be some wastage for 2km scenario but it should cover both cases.
What I did:
Enable Sending BGP Community over internal neighbors over iBGP Session
Microsoft ADO: 25268695
Why I did:
Without this change BGP community send by e-BGP Peers are not carry-forward to other e-BGP peers.
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52141
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 16:08:26 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52688
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
Last update: Tue Sep 26 15:45:51 2023
After the change
str2-xxxx-lc2-2(config)# router bgp 65100
str2-xxxx-lc2-2(config-router)# address-family ipv4
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V4 send-community
str2-xxxx-lc2-2(config-router-af)# exit
str2-xxxx-lc2-2(config-router)# address-family ipv6
str2-xxxx-lc2-2(config-router-af)# neighbor INTERNAL_PEER_V6 send-community
str2-xxxx-lc1-2# show bgp ipv6 20c0:a801::/64
BGP routing table entry for 20c0:a801::/64, version 52400
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65500
2603:10e2:400::6 from 2603:10e2:400::6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:19 2023
str2-xxxx-lc1-2# show ip bgp 192.168.35.128/25
BGP routing table entry for 192.168.35.128/25, version 52947
Paths: (1 available, best #1, table default)
Not advertised to any peer
65000 65502
3.3.3.6 from 3.3.3.6 (3.3.3.6)
Origin IGP, localpref 100, valid, internal, best (First path received)
**Community: 1111:1111**
Last update: Tue Sep 26 16:10:09 2023
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-sairedis
```
* c22b76b - (HEAD -> master, origin/master, origin/HEAD) [VOQ][saidump] Enhance saidump with new option -r to parser the JSON file and displays/format the right output (#1288) (17 hours ago) [JunhongMao]
* 31bd92a - Add log for git revision (#1293) (4 days ago) [Kamil Cudnik]
* edf6597 - [submodule] Update SAI submodule to v1.13 (#1292) (6 days ago) [Kamil Cudnik]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Add info syslog for cpu_wdt.service when trigger watchdog arm action.
How I did it
Add info syslog for cpu_wdt.service when trigger watchdog arm action.
#### Why I did it
src/sonic-platform-common
```
* c63abc0 - (HEAD -> master, origin/master, origin/HEAD) [Credo][Ycable] Remove the thread locker protection from the thread-safe APIs (#388) (21 hours ago) [Xinyu Lin]
```
#### How I did it
#### How to verify it
#### Description for the changelog
This fixesNokia-ION/ndk#22
Note that this PR must be coupled with NDK version >= 22.9.13
Why I did it
To provide proper support for CMIS compliant transceiver module CDB operations (including FW related operations).
How I did it
Enhanced the transport subsystem so as to provide for up to 2k bytes of data to be passed to/from modules (as contrasted with the prior max of 128 bytes).
How to verify it
Ensure that new FW (firmware) can be programmed to CMIS compliant module(s) using the 'sfputil firmware ...' commands.
Why I did it
We install many deb packages when building sonic slave images.
To guarantee that the filesystem data is always consistent and safe,
dpkg performs fsync(2)s on its database and files unpacked from packages.
We don't need to use fsync for sonic slave images.
So we can reduce build time using eatmydata.
How I did it
Install deb package eatmydata in sonic-slave-buster and sonic-slave-bullseye docker images.
Pass apt-get install, apt install, apt-get upgrade, and dpkg -i with arguments directly to eatmydata.
How to verify it
Compare the build time of sonic-slave images with and without eatmydata.
For some NVME SSD I improved it by 30-40%.
You get no performance boost if your fs is mounted with options like nobarrier.
vlan import for yang currently doesn't work, so was removed from the original PR: #14521
Adds comments to remember to add later
Signed-off-by: Nikola Dancejic <ndancejic@microsoft.com>
Add two new hwskus for different port speed layouts
Arista-7060DX5-32-25Gx96-100Gx8-200Gx8
Arista-7060DX5-32-200Gx50-100Gx14
Disable bfd on all hwskus for x86_64-arista_7060dx5_32 as its dependencies have not been ready, which will result in a runtime error if not disabled.
#### Why I did it
src/sonic-host-services
```
* 3022c1b - (HEAD -> master, origin/master, origin/HEAD) Updated the iptable rule to use parent/base name of midplane interface of chassis. (#75) (6 hours ago) [abdosi]
```
#### How I did it
#### How to verify it
#### Description for the changelog
The Makefile for src/sonic-eventd had no clean target, which means build artifacts may incorrectly get reused across builds, when they need to get rebuilt for whatever reason (build environment changed, libraries changed, etc.).
Microsoft ADO (number only): 25135443
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
To include files in path platform/broadcom/sonic-platform-modules-dell/s6100/bin during build in Dell S6100 platform deb package.
How I did it
During Dell S6100 platform deb package build, copy the files to the install location.
How to verify it
- Copy the required files to platform/broadcom/sonic-platform-modules-dell/s6100/bin.
- Build the SONiC image and install in a Dell S6100 device.
- The files will be available in /usr/share/sonic/device/x86_64-dell_s6100_c2538-r0/bin/.
Fix debian files for libnl3 to enable a parallel build.
How to verify it
SONIC_CONFIG_MAKE_JOBS=20
now:
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb-clean
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb
grep Elapsed target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb.log
Elapsed time: 0h 1m 51s
fixed version:
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb-clean
make target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb
grep Elapsed target/debs/bullseye/libnl-3-200_3.5.0-1_amd64.deb.log
Elapsed time: 0h 0m 22s
SONiC CLI command was broken.
admin@sonic:~$ show platform psustatus
PSU Model Serial HW Rev Voltage (V) Current (A) Power (W) Status LED
----- --------------- ------------------ -------- ------------- ------------- ----------- -------- -----
PSU 1 PFE600-12-054NA 420000956420600006 206 N/A N/A 82.00 OK green
PSU 2 PFE600-12-054NA 420000956420600248 206 N/A N/A 60.00 NOT OK green
Management port currently broken for Edgecore AS4630-54PE platform due to NIC hardware numbering.
Created new PR with typo from Edgecore in original PR fixed. Here is a link to the old PR that has broken logic:
#9560
Add alternate name eth1-midplane to Linux bridge br1 created on supervisor on some chassis platforms.
See description here: #16504
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Boot up a switch, if frrcfgd is enabled with frr_mgmt_framework_config being "true",
then "bgpmon" process should not be running after this change. bgpmon should be
running when bgpcfgd is enable with frr_mgmt_framework_config being "false"
Why I did it
Added DPB support for x86_64-dell_z9100_c2538-r0 device
How I did it
Added new SKU folder Force10-Z9100 based on Force10-Z9100-C32
Added platform.json and hwsku.json
Added generic th-z9100-flex-all.config.bcm
How to verify it
On x86_64-dell_z9100_c2538-r0 with changes from this PR
change default SKU to Force10-Z9100
do factory reset
reboot
Signed-off-by: Myron Sosyak <myron.sosyak@plvision.eu>
Co-authored-by: Andriy Kokhan <andriy.kokhan@gmail.com>
* platform/pddf/README.md: Fix typo in *development*
* platform/pddf/README.md: Remove trailing space
* platform/pddf/README.md: Remove leading space from all lines
Fix tcpdump report error when tacacs enabled.
Why I did it
Fix tcpdump report error when tacacs enabled:
Sep 1 09:25:18.189395 vlab-01 ERR tcpdump: nss_tacplus: /etc/tacplus_nss.conf fopen failed
Sep 1 09:25:18.189606 vlab-01 ERR tcpdump: nss_tacplus: bad config or server line for nss_tacplus
This is because debian add a patch create AppArmor profile for resource access control. The profile need update to allow tcpdump access /etc/tacplus_nss.conf.
Work item tracking
Microsoft ADO: 17667308
How I did it
Modify tcpdump AppArmor profile, add new line to allow tcpdump access TACACS config file:
/etc/tacplus_nss.conf r,
#15926 updated the submodule hash to point to a commit on a private branch that included changes for compiling with the 5.10.179 kernel. However, this submodule hash should've pointed to one on the master branch, not on a private branch. Fix this with this PR.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### Why I did it
src/dhcpmon
```
* 7c55e50 - (HEAD -> master, origin/master, origin/HEAD) Merge pull request #13 from jcaiMR/dev/jcai_master_interface_counter (7 days ago) [StormLiangMS]
* 085a087 - refine counting logic (10 days ago) [jcaiMR]
* de96a98 - Merge branch 'master' into dev/jcai_master_interface_counter (11 days ago) [jcaiMR]
* 5cb4468 - dhcp per-interface counter init commit (12 days ago) [jcaiMR]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/dhcprelay
```
* 2b33d76 - (HEAD -> master, origin/master, origin/HEAD) dhcpv6 per interface counter support (#43) (7 days ago) [jcaiMR]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-linux-kernel
```
* 3158031 - (HEAD -> master, origin/master, origin/HEAD) Update to Linux 5.10.179 (#328) (6 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
##### Work item tracking
- Microsoft ADO **(number only)**:13366345
#### How I did it
Add generic omprog file in all dockers for rsyslog plugin support. Add file to docker-config-engine-bullseye so no need to add individually.
#### How to verify it
UT/Pipeline
Stop installing development packages from telemetry docker images to avoid unnecessary space usage.
### Why I did it
From 202305, libswsscommon-dev and the Boost headers were brought in telemetry docker image incorrectly, which result in unnecessary space usage.
##### Work item tracking
- Microsoft ADO **(number only)**:25176224
#### How I did it
Remove libswsscommon-dev accordingly.
#### How to verify it
Image building.
#### Why I did it
src/sonic-platform-common
```
* 3d3bc1a - (HEAD -> master, origin/master, origin/HEAD) [Credo][Ycable] Fix for displaying 'N/A' firmware version when NIC endpoint is power off (#366) (2 hours ago) [Xinyu Lin]
```
#### How I did it
#### How to verify it
#### Description for the changelog
### Why I did it
syncd events should have tag sonic-events-syncd, not sonic-events-host. Created a new conf file which will have syncd events
##### Work item tracking
- Microsoft ADO **(number only)**:17747466
#### How I did it
Code change
#### How to verify it
Pipeline
