Orchagent is crashing on the latest SONiC images. Issue #458
is raised to track the problem. Dynamic port breakout
commit 6f40933d3d introduced
this regression. One of the recommendation that we received
was to disable the loopback and mgmt ports in bcm config.
It was helpful in fixing the issue but not the ideal solution.
It works on qfx5210 as the loopback and management configurations
are not applicable.
While the orchagent crash is being debugged, we need this commit
to fix the issue in qfx5210 platform. This patch can be reversed
once the correct fix for the orchagent is identified.
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* add config.bcm for hlx
* modify config.bcm path for hlx
* Delete hx4-cel-hbtn-48x1G+4x10G.config.bcm
* add config.bcm and path
* update led for cxp
* Add new device data for dx010
* [SNMP] management VRF SNMP support
This commit adds SNMP support for Management VRF using l3mdev.
The patch included provides VRF support, there is no single
"listendevice" configuration, rather multiple agentaddress
config options can each have their own "interface" to bind to
using "ip%interface". The snmpd.conf file is accordingly
generated using the snmp.yml file and redis database info.
Adding below the comments of SNMP patch 1376
--------------------------------------------
Since the Linux kernel added support for Virtual Routing
and Forwarding (VRF) in version 4.3
(Note: these won't compile on non-linux platforms)
https://www.kernel.org/doc/Documentation/networking/vrf.txt
Linux users could not use snmpd in its current form to
bind specific listening IP addresses to specific VRF
devices. A simplified description of a VRF inteface
is an interface that is a master (a container of sorts)
that collects a set of physicalinterfaces to form a
routing table.
This set of two patches (one for V5-7-patches and one
for V5-8-patches branches) is almost identical to patch
single "listendevice" configuration. Rather, multiple
agentAddress config options can each have their own
"interface" to bind to using the <ip>%<interface>
syntax.</interface></ip>
-------------------------------------------
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
Commits on Sep 10, 2019
[config] Add commands to remove BGP neighbor configuration (#625) da5cc8c
Commits on Sep 12, 2019
[config] Reset failed status of all SONiC services, whether or not th… b943d67
Commits on Sep 13, 2019
[warm-reboot]: Do not clean up mirror session state database (#639) cbcdc82
Commits on Sep 17, 2019
Add SSD Health CLI utility (#587) 065414a
Fixed config Asym PFC CLI. (#632) c1c53f5
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
Commits on Aug 15, 2019
[sonic_sfp] Fix global name about sfp module is not defined (#53) 04014b6
Commits on Aug 20, 2019
[xcvrd] Fix crashing due to missing fields of some module types (#54) c011c73
Remove duplicated sonic_eeprom and create symlink (#55) 087593e
Commits on Sep 10, 2019
[sfp_base] Raise exceptions (previously was incorrectly returning the… c21507e
Added new API to interact with the platform components (#60) 33b037d
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
This commit adds NTP support for management VRF using L3mdev. Config vrf add
mgmt will enable management VRF, enslave the eth0 device to the master device
mgmt, stop ntp service in default, restart interfaces-configs and restart ntp
service in mgmt-vrf context. Requirement and design are covered in mgmt vrf
design document.
Signed-off-by: Harish Venkatraman <harish_venkatraman@dell.com>
Introduce a new "sflow" container (if ENABLE_SFLOW is set). The new docker will include:
hsflowd : host-sflow based daemon is the sFlow agent
psample : Built from libpsample repository. Useful in debugging sampled packets/groups.
sflowtool : Locally dump sflow samples (e.g. with a in-unit collector)
In case of SONiC-VS, enable psample & act_sample kernel modules.
VS' syncd needs iproute2=4.20.0-2~bpo9+1 & libcap2-bin=1:2.25-1 to support tc-sample
tc-syncd is provided as a convenience tool for debugging (e.g. tc-syncd filter show ...)
Both python2 and python3 wheels being built out of the same
source directory can interfere with each other when
SONIC_BUILD_JOBS > 1.
Signed-off-by: Greg Paussa <greg.paussa@broadcom.com>
Upon snmpd closes a netsnmp_agent_session due to snmp_timeout
there is a possibility of crash due to stale memory access.
This is a patch from source-forge:net-snmp. commit-id #793d59
* Use dot1p to tc mapping for backend switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for
storage switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* [cron.d] Create cron job to periodically clean-up core files
* Create script to scan /var/core and clean-up older core files
* Create cron job to run clean-up script
Signed-off-by: Danny Allen <daall@microsoft.com>
* Update interval for running cron job
* Respond to feedback
* Change syslog id
- monit config broke by one monit upgrade
- abandon sed approach since it is suspestible to monit config changes
- use unixsocket instead of httpd due to a bug in 5.20.0
* Adding platform support for Juniper QFX5210
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* [Juniper][QFX5210] Optoe driver for SFP management
This commit implements the following changes
- Moving to optoe driver for sfp management
- Removing the old sfp driver
- Updating the port-config.ini to add the index field
- Correction in sfputil.py to incorporate optoe driver
- Platform support for 'poweroff' command
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
Implemented remaining APIs in s6100,z9100,s6000
Removed soft link in s6100,s6000,z9100 and implemented seperately
Implemented get_transceiver_change_event in S6000
* Use dot1p to tc mapping for backend switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
* Do not write DSCP to TC mapping into CONFIG_DB or config_db.json for
storage switches
Signed-off-by: Wenda Ni <wenni@microsoft.com>
This switch has 64 QSFP28 (40G/100G) ports, 2 SFP+ (1G/10G) ports
on Broadcom Tomahawk II chipset. CPU used in QFX5210-64C-S is
Intel Broadwell-DE. The machine has Redundant and hot-swappable
Power Supply (1+1) and also has Redundant and hot swappable fans (3+1).
Signed-off-by: Ciju Rajan K <crajank@juniper.net>
[build_debian] Generate checksum of ASIC config files
* Adds script to generate checksums for ASIC config files
* Adds step to build_debian that copies ASIC config checksum into SONiC filesystem
Signed-off-by: Danny Allen daall@microsoft.com
Submodule src/sonic-utilities 4024019594bc9174374ed3a3b594d8a43299dd07:
[doc/command-reference.md] dos2unix & remove trailing spaces (#591)
[show] Add BGP neighbor info to 'show ip/ipv6 interfaces' command output (#598)
[config]: fix the runtime error of the 'show line' command (#595) (#596)
Revert "Removed 'show interfaces alias'. (#412)" (#603)
[debug][undebug] Rework of CLI for BGP (#583)
Changing "show runningconfiguration interface" to "show runningconfiguration ports" (#600)
[config] Add commands to add/remove DHCP server address from a VLAN (#585)
[neighbor_advertiser] Use full vlan name for vxlan tunnel map programming (#604)
[neighbor_advertise]: Use the existing MIRROR ACL table (#605)
Read config DB for running interface(s) and display per port/interface (#594)
[fast/warm reboot] kill radv docker before stopping BGP (#608)
[config] Add commands for adding/removing syslog servers (#609)
[config] Call 'systemctl reset-failed' before 'systemctl restart' when restarting services (#607)
[Command Reference] Add config commands for DHCP relay destination address (#610)
[config] Add commands for adding/removing NTP servers (#611)
[neighbor_advertiser]: Add V6 support to mirror ICMPV6 packets (#612)
[neighbor advertiser] try getting vlan addresses from o.s first (#613)
[show] Add command 'show runningconfiguration syslog' (#617)
[show] Add command 'show runningconfig ntp' (#620)
Added check to config syslog del to verify if ip address was configured. (#622)
[fast-reboot] Check if ASIC config has changed before warm reboot (#621)
Signed-off-by: Danny Allen daall@microsoft.com
This piece of information is currently not used. Revert this
pull request in the future to add back the default mirror
session information into the configuration database.
Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
