- Make sure that migrated DB contents persisted for next boot
- Make sure that db saved after warm reboot.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [dell/Z9100] Fix for optics not detected in fanout mode
This commit fixes the issue of optics not detected
error while running sfputil show eeprom command. The root
casuse was the value of port index from port_config.ini for
fan out scenario. The port index should be starting from 0
and not 1. Platform cpld registers are assuming the port
numbers to start from 0 (lowermost bit), sfputils.py uses this
port number in get_presence function. Since the indexing passed
is wrong the optics was not detected and gave SFP EEPROM not
detected message.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@Dell.com>
* [dell/z9100] Fix for optics not detected in fanout mode
This commit fixes the issue of optics not detected error
while running sfputil show eeprom command. The root cause
was wrong port_index in fan out scenarios. Earlier fix of
changing the port_config.ini is reverted and changes made
in z9100 platform specific sfputil.py file. The port number
is decrement and tested for both 100G and 50G fanout cases.
Tested for the following show commands and test was succesful
show interfaces status, show interfaces transceiver eeprom,
show interfaces transceiver lpmode, show interface tranceiver
presence.
Signed-off-by: Harish Venkatraman <Harish_Venkatraman@Dell.com>
Submodule src/sonic-platform-common 42119e1..5d7954e:
> [ChassisBase] Make reboot cause constant strings human-readable (#35)
> Add .gitignore file (#28)
> [sonic_platform_base] Add sonic_sfp and sonic_eeprom to sonic_platform_base (#27)
> Enhance new platform API (#19)
> fix typo in platform API base class (#25)
Submodule src/sonic-swss 9cf7b01..1e99c93:
> Set timer only when interval changes. Not in each firing of the timer. (#945)
Submodule src/sonic-utilities ec1e93f..24958f1:
> [fast reboot] stop removing opennsl module before reboot (#560)
Submodule src/sonic-swss-common b472f6e..d6140fa:
> timerfd:read failure - Record in logs as error. (#295)
> do not abort when read timerfd return 0 and errno = 0 (#291)
> Add an assert to logger, which will log a message and abort. (#286)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* fix the memory leak in on_pmpe. objects created via sx_api having convention new_<type_name> should be release explicitly via delete_<type_name>.
* avoid duplicate code.
* fix fast reboot compatibility
We should handle both cases for backward-compatible with 201803:
- fast-reboot
- SONIC_BOOT_TYPE=fast-reboot
* handle review comments
* add a comment that getBootType code snippet is shared between two files
- What I did
Configure sshd to close all SSH connetions after 15 minutes of inactivity.
- How I did it
Set ClientAliveInterval to 900 (900 seconds = 15 minutes) and ClientAliveCountMax to 0
in /etc/ssh/sshd_config using augtool in build_debian.sh. In the process, I refactored the existing augtool command for sshd_config so as to add comments and empty lines to file for readability.
- How to verify it
Log into device via management port. Wait 15 minutes without sending a keystroke -- you should be automatically logged out.
2) Install debug tools in every debug docker image
3) Install available debug symbols in debug docker image
4) Provide additional host/docker mapping for host dirs /src & /debug
4.1) The one-image will have source code under /src
4.2) /debug is mapped as rw. User can put his core file there and use this dir to
collect debug session logs too.
5) Build debug image using debug dockers
6) Source code is archived into /src of debug image
7) The welcome banner is extended to display these additional facilities in debug image.
Upgrade the version of rsyslog installed in Docker containers to the latest version available from jessie-backports repo (currently 8.23.0-2~bpo). Based off my change to the 201803 branch (#2709). This should eliminate some memory leaks and will prevent any regressions if moving from the 201803 branch to the 201811 branch.
* [submodule] update sonic-linux-kernel (#2985)
* Fix many version strings
* Update minor version
* Update arista-drivers submodule (#9)
* Rebuild SDK on new kernel (#10)
* Set the default mac ageing time to 300 seconds
The current mac ageing was disabled, this could lead the mac address
table to increase over time and lead to resource and performance issues.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
* Update the default HW ageing timer to be 600 seconds.
This is to be on the safer side where ARP update interval
is 300 seconds and SONiC does not flood when ARP is aged out.
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
- Broadcom SAI GA version 20190513
- Broadcom fix for CS7999193, CS7913246, CS4529162, CS8180755, CS8242625
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
- What I did
Currently when the system is under memory pressure, the OOM killer kicks in and kills a rogue process. Killing a rogue process can cause the device to be un-healthy leading to blackholing of the traffic.
To avoid this, configure the OOM to do a kernel panic which will cause the device to reboot and come back up healthy.
- How I did it
Added the sysctl variable panic_on_oom and set the value to 2.
Setting it to 2 will ensure OOM killer to always do a kernel panic.
Submodule src/sonic-utilities 6b4d1a0..46b5aa8:
> [show ip interface] Add support for 'alias' interface naming mode (#486)
Submodule src/sonic-swss 9c4ae18..a637562:
> Suppress storm detect counter increment for ongoing pfc storm case during a warm reboot (#869)
> Remove *_LEFT fields to allow PFC watchdog to enter fresh into the (#897)
> Set LAG mtu value based on kernel netlink msg (#922)
> [warm restart assist] assume vector values could be reordered (#921)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Submodule src/sonic-utilities 7a2348c..4488525:
> use vlan members (#542)
> [sonic_installer] If asked to install an image which is already installed, simply set as default (#534)
Submodule src/sonic-swss 8246bd9..9c4ae18:
> Ignore neighbor entry with BCAST MAC, check SAI status exists (#914)
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* [logrotate] Decrease frequency to every 10 minutes; kill any lingering logrotate processes
* [logrotate] Delete all *.1.gz files as firstaction; Remove note about init-system-helpers < 1.47 workaround
However, continue to send SIGHUP directly to rsyslogd process
because 'service rsyslog rotate' still doesn't work properly with
init-system-helpers version 1.48
