Why I did it
If make fails, we can't rerun the make process, because existing patches can't apply again.
How I did it
Check if patches are applied. if yes, don't apply patches again.
How to verify it
Why I did it
The current PTF library contains a typo - when building a VxLAN packet, it uses the VxLAN module directly from the scapy library which will cause test failures.
How I did it
Patch simple_vxlan_packet to use the VxLAN module wrapped/defined in packet.py from the PTF library.
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
There is a queue in sysmonitor.py that is created based on an object of multiprocessing.Manager.
After performing fast-reboot, system health monitor is being shut down, what causes this Manager to be shut down as well, since it is a child-process of healthd.
That's why I moved the creation of this Manager from the top of the file to the function Sysmonitor.system_service() (The only place it is used), to make Manager a child-process of Sysmonitor, instead of Healthd. This way both the queue (the Manager) and the processes that uses this queue will be child-processes of the same process, and the problematic scenario of sysmonitor sending messages to a dead queue will not be possible.
How I did it
Removed the definition of manager as global and moved it to system_service() function
How to verify it
Perform a fast reboot and verify the traceback issue is fixed
Why I did it
[Build] Support Debian snapshot mirror to improve build stability
It is to enhance the reproducible build, supports the Debian snapshot mirror. It guarantees all the docker images using the same Debian mirror snapshot and fixes the temporary build failure which is caused by remote Debain mirror indexes changed during the build. It is also to fix the version conflict issue caused by no fixed versions of some of the Debian packages.
How I did it
Add a new feature to support the Debian snapshot mirror.
How to verify it
Why I did it
This PR is to update minigraph.py to support both port alias and port name as input of AttachTo attribute of ACL table.
Before this change, only port alias is supported.
How I did it
Add a global variable to store port names
Search both port names and port alias wheh parsing the value of AttachTo.
How to verify it
Verified by a new unit test case test_minigraph_acl_attach_to_ports
Verified by copying the new minigraph.py to a testbed and run conflg load_minigraph.
Many of these switches have had flash upgraded beyond 2G however, in
boot0 both were assigned 2GB for legacy reasons.
Remove the hardcoding of the flash size and let boot0 autodetect the available space.
Signed-off-by: Graham Hayes <gr@ham.ie>
Signed-off-by: Graham Hayes <gr@ham.ie>
Why I did it
[Seastone] Enhancement fix for PR12200 syseeprom issue.
How I did it
Enhance the fix through replace the hardcoded devnum to bash variable
How to verify it
show platform syseeprom or decode-syseeprom
Why I did it
Ragile adapter ra-b6510-32c ra-b6510-48v8c ra-b6910-64c ra-b6920-4s to kernel 5.x
Signed-off-by: “pettershao” pettershao@ragilenetworks.com
#### Why I did it
Added SONiC YANG model for RADIUS.
Fixes https://github.com/sonic-net/sonic-buildimage/issues/12477
#### How I did it
Added the RADIUS and RADIUS_SERVER tables for global and per RADIUS server configuration. RADIUS statistics reside in COUNTERS_DB and are not part of the configuration. These are not a part of this PR.
#### How to verify it
Compiled sonic_yang_mgmt-1.0-py3-none-any.whl.
#### Description for the changelog
SONiC YANG model for RADIUS.
The main issue is the pip/pip3 command cannot be found when the package is being installed by apt-get.
When using the dpkg install, the searching path is PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
When using the apt-get install, the searching path is PATH=/usr/sbin:/usr/bin:/sbin:/bin
But the pip/pip3 default path is at /usr/local/bin, so dpkg works, but apt-get not work.
How I did it
Export the path /usr/local/bin for pip/pip3.
Make the deb packages can be installed by apt-get.
- Why I did it
In case of warm/fast reboot, the hardware reboot cause will NOT be cleared because CPLD will not be touched in this flow. To not confuse the reboot cause determine logic, the leftover hardware reboot cause shall be skipped by the platform API, platform API will return the 'REBOOT_CAUSE_NON_HARDWARE' instead of the "hardware" reboot cause.
- How I did it
Check the proc cmdline to see whether the last reboot is a warm or fast reboot, if yes skip checking the leftover hardware reboot cause.
- How to verify it
a. Manual test:
- Perform a power loss
- Perform a warm/fast reboot
- Check the reboot cause should be "warm-reboot" or "fast-reboot" instead of "power loss"
b. Run reboot cause related regression test.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
docker-sonic-mgmt build is failing.
How I did it
stretch docker is disabled recently. Update docker-sonic-mgmt to buster.
Migrate from sonictest to sonicbld. Because Azure requires migrate vm from uswest2 to uswest3.
Fix a build issue when build image.
How to verify it
Update sonic-swss-common submodule pointer to include the following:
a4987b9 Change the dtor of ProducerStateTable to virtual method (#735)
7be565c [hash]: Add GH DB schema. (#733)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
This is primarily to fix the armhf build failure due to deepdiff python
module getting updated.
1eb7a5b Pin deepdiff to version 6.2.2
ae09e3f [caclmgrd][dualtor] add iptables rule for dualtor gRPC to allow packets getting forwarded from loopback IP
00cb8cb [hostcfgd] Optimize the hostcfgs by moving the definition cmds into the loop to optimize the enable/disable service command run.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
We plan to pilot k8s feature, need to fix several bugs including enable telemetry feature and add platform label.
How I did it
Add support feature set, only enable telemetry container upgrade for now
Add platform label for scheduler usage
Remove CNI installation code, it would be auto installed when install kubeadm
How to verify it
After sonic device join k8s cluster, show node labels to check if platform label is visible.
Signed-off-by: Yun Li yunli1@microsoft.com
Fix code issue when SonicV2Connector.get() return None.
#### Why I did it
When database key does not exist, SonicV2Connector.get() will return None.
Code will break if not check return value.
#### How I did it
Check SonicV2Connector.get() return value before use it.
#### How to verify it
Pass all E2E test case.
Why I did it
docker-sonic-slave pipeline has a different tag with PR build.
It leads to ENABLE_DOCKER_BASE_PUll=y not work.
How I did it
set reproducible build option in bash.
How to verify it
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
Why I did it
The display of azure pipeline is not specific now, such as when the step Run test fails, the display of itself shows successful, but the display of step Kvmdump shows fails, but actually, the step Kvmdump doesn't fail. I improve the display of azure pipeline in this pr, each step has its own success or failure, and is shown in azure pipeline.
How I did it
1. Each step has its own signature of success or failure.
2. Using the chain of responsibility pattern to manage all status.
3. Modify the expected-state in each step.
if there is no request, you need to use curl to get data from bmc, and each query needs to start a curl process. pmon is a circular query, which will pull up multiple processes in a loop, which consumes a lot. Using request does not need to pull up the process.
The console of the centec-arm64 board is ttyAMA0.The current regular expression cannot be correctly parsed.
Signed-off-by: centecqianj <qianj@centec.com>
During the build process, a dsc file is retrieved from the URL:
http://deb.debian.org/debian/pool/main/i/isc-dhcp/isc-dhcp_4.4.1-2.3.dsc
Depending on the DNS resolution, the server reached may respond with a
HTTP 404 error code, what stops the build process.
In all cases, the URL http://deb.debian.org/debian/pool/main/i/isc-dhcp/
no more lists this DSC file but one with a different format.
The suffix "+deb11u1" is now appended to identify the debian version.
- append this suffix to the make file rules of isc-dhcp
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
What I did:
Fix : #13117
How I did:
During build time mask only those feature/services that are disabled explicitly. Some of the features ((eg: teamd/bgp/dhcp-relay/mux/etc..)) state is determine run-time so for those feature by default service will be up and running and then later hostcfgd will mask them if needed.
So Default behavior will be
init_cfg.json.j2 during build time make state as disabled then mask the service
init_cfg.json.j2 during build time make state as another jinja2 template render string than do no mask the service
init_cfg.json.j2 during build time make state as enabled then do not mask the service
How I verify:
Manual Verification.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Undo submodule updates that were incorrectly done in #13056.
Partial revert of d57de09
The following submodule changes are being reverted to the version that were present before the above PR got merged:
src/sonic-linux-kernel to 34f26b35839d7c0c09d48176c4ec33197344643c
src/sonic-frr/frr to 79188bf710e92acf42fb5b9b0a2e9593a5ee9b05
Signed-off-by: Saikrishna Arcot sarcot@microsoft.com
Why I did it
Fix issue caused by dualtor support PR [dhcpmon] Open different socket for dual tor to enable interface filtering #11201
Improve code
How I did it
On single ToR, packets received count was duplicated due to socket filter set to "inbound"
Tx count not increasing due to filter set to "inbound". Added an outbound socket to count tx packets
Added vlan member interface mapping for Ethernet interface to vlan interface lookup in reference to PR Fix multiple vlan issue sonic-dhcp-relay#27
Exit when socket fails to initialize to allow dhcp_relay docker to restart
How to verify it
Tested on vstestbed single tor and dual tor, sent packets and verify printed out dhcpmon rx and tx counters is correct
Correct number of tx increases
Tx does not increase when ToR is on standby
Why I did it
Enable Test sai api on bfn container with a lightweight container(saiserver).
How I did it
enable saiserver container on barefoot platform.
add docker-saiserver-bfn.mk for building saiserver container
in platform/barefoot/docker-saiserver-bfn, add necessary files that needs in saiserver container
How to verify it
Tested on Intel platform ec9516
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
why
In order to apply different config across different platform, and use the code with a unified format, reuse syncd init script to init saiserver.
How I did it
how
Reuse syncd init script
How to verify it
Test
Test in DUT s6000 and dx010 with sonic 202205
#### Why I did it
Submodule update for sonic-gnmi
Incorporates:
d922a07 Zain Budhwani Wed Jan 4 21:27:32 2023 -0800 Fix gnmi cli hang (sonic-net/sonic-gnmi#69)
#### How I did it
Get latest updates
Update sonic-sairedis submodule pointer to include the following:
402eb14 [ppi]: Enable bulk API. (#1171)
86bb828 Switch to using stock gcovr 5.2 (#1174)
1c9ca78 Manage LANES mapping on VOQ system (#1127)
5887d31 Fix for [EVPN] When MAC moves from remote end point to local, ASIC DB fields are not updated properly for the mac #11503Update NotificationProcessor.cpp (#1118)
559bd5b [ci][asan] add DVS tests run with ASAN (#1139)
4ab46b5 Initialize attr variables in Legacy.switch_get and LegacyFdbEntry.fdb_entry_get (#1169)
4e24c77 The meta_sai_validate_fdb_entry() validates the input FDB entry for the (#1154)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
In some cases, dpkg will call dpkg to validate version.
dpkg hook will get stuck in a loop to lock.
How I did it
Use an env variable to skip duplicated lock.
#### Why I did it
Timestamp formatter inside UT was failing due to new year change
#### How I did it
Use a const stored year that will used as expected value
#### How to verify it
Run UT
./functions.sh script contains twice the command "git describe --tags".
Azure pipelines currently retrieves the repository content by using a
"git clone" or "git fetch" command with the option "--depth".
When the depth is not enough sized to reach a tag in the "git log"
history, "git describe --tags" generates on stderr the warning:
"fatal: No names found, cannot describe anything."
https://stackoverflow.com/questions/4916492/git-describe-fails-with-fatal-no-names-found-cannot-describe-anything
During the build process, the functions.sh script is a lot consumed and
this pointless warning appears in CI thousand lines w/o any added value.
This situation can be easily avoided by redirecting related commands
stderr output to /dev/null.
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
Why I did it
Advance dhcprelay submodule for master
4bf1868 - (HEAD, origin/master, origin/HEAD, master) fix relay-reply dhcpv6 packet counter issue [jcaiMR]
How I did it
How to verify it
Why I did it
In the voq chassis the buffer_queue configuration needs to be applied on system_port instead of the sonic port.
This PR has the change to do this.
How I did it
Modify buffer_config.j2 to generate buffer_queue configuration on system_ports if the device is Voq Chassis
How to verify it
Verify the buffer_queue configuration is generated properly using sonic-cfggen
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
