* To resolve NEIGH table entries present in CONFIG_DB. Without this change arp/ndp entries which we wish to resolve, and configured via CONFIG_DB are not resolved.
Why I did it
src/sonic-py-swsssdk
* d44e0d8 - (HEAD -> 202012, origin/202012) [Security] Fix the redis security issue CVE-2023-28858 and CVE-2023-28859 (#135) (3 days ago) [xumia]
#### Why I did it
[Build] Upgrade the python docker version to fix bgp not up issue
##### Work item tracking
- Microsoft ADO **(number only)**: 22236397
Using timer-override.conf, we modify the fstrim.timer service.
For armhf, Nokia-7215 platform, we modify fstrim.timer to run daily
instead of weekly. This is required because the size of the SSD on
this platform is 16GB, which on average is nearly 10 times smaller than
most other sonic platforms. With smaller disk and the ever increasing
level of logging done by sonic, this change is required to prevent
the SSD from entering a read-only state due to inadequate free blocks.
#### Why I did it
sonic-utilities submodule update for 202012
```
* d20fc3c8 2023-04-07 | [202012][DBMigrator] Update db_migrator to support EdgeZoneAggregator Buffer Config for T0s (#2768) (HEAD, origin/202012) [Dev Ojha]
* 322a74dd 2023-03-27 | Resolved rc!=0 problem by replacing fgrep with awk. Added ipv4 filtering to get only v4 peers in case of show ip bgp neighbors (#2743) [saurabhab]
```
##### Work item tracking
- Microsoft ADO **(number only)**: 20782336
Why I did it
Fix similar issue seen on #13739 but only for DCS-7050CX3-32S
How I did it
Add a kernel parameter to tell libata to disable NCQ
How to verify it
The message ata2.00: FORCE: horkage modified (noncq) should appear on the dmesg.
Test results using: fio --direct=1 --rw=randrw --bs=64k --ioengine=libaio --iodepth=64 --runtime=120 --numjobs=4
with NCQ
READ: bw=26.1MiB/s (27.4MB/s), 26.1MiB/s-26.1MiB/s (27.4MB/s-27.4MB/s), io=3136MiB (3288MB), run=120053-120053msec
WRITE: bw=26.3MiB/s (27.6MB/s), 26.3MiB/s-26.3MiB/s (27.6MB/s-27.6MB/s), io=3161MiB (3315MB), run=120053-120053msec
without NCQ
READ: bw=22.0MiB/s (23.1MB/s), 22.0MiB/s-22.0MiB/s (23.1MB/s-23.1MB/s), io=2647MiB (2775MB), run=120069-120069msec
WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=2665MiB (2795MB), run=120069-120069msec
Why I did it
Innovium platform has build issue.
Remove it from upgrade version pipeline.
Work item tracking
Microsoft ADO (number only):
How I did it
How to verify it
[S6100] Improve S6100 serial-getty monitor, wait and re-check when getty not running to avoid false alert.
This is cherry-pick PR for: https://github.com/sonic-net/sonic-buildimage/pull/14402
#### Why I did it
On S6100, the serial-getty service some time can't auto-restart by systemd. So there is a monit unit to check serial-getty service status and restart it.
However, this monit will report false alert, because in most case when serial-getty not running, systemd can restart it successfully.
To avoid the false alert, improve the monitor to wait and re-check.
Steps to reproduce this issue:
1. User login to device via console, and keep the connection.
2. User login to device via SSH, check the serial-getty@ttyS1.service service, it's running.
3. Run 'monit reload' from SSH connection.
4. Check syslog 1 minutes later, there will be false alert: ' 'serial-getty' process is not running'
##### Work item tracking
- Microsoft ADO :17424426
#### How I did it
Add check-getty.sh script to recheck again later when getty service not running.
And update monit unit to check serial-getty service status with this script to avoid false alert.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly:
```
admin@***:~$ sudo systemctl stop serial-getty@ttyS1.service
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
1
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
Active: inactive (dead) since Tue 2023-03-28 07:15:21 UTC; 1min 13s ago
admin@***:~$ sudo /usr/local/bin/check-getty.sh
admin@***:~$ echo $?
0
admin@***:~$ sudo systemctl status serial-getty@ttyS1.service
● serial-getty@ttyS1.service - Serial Getty on ttyS1
Loaded: loaded (/lib/systemd/system/serial-getty@.service; enabled-runtime; vendor preset: enabled)
```
syslog:
```
Mar 28 07:10:37.597458 *** INFO systemd[1]: serial-getty@ttyS1.service: Succeeded.
Mar 28 07:12:43.010550 *** ERR monit[593]: 'serial-getty' status failed (1) -- no output
Mar 28 07:12:43.010744 *** INFO monit[593]: 'serial-getty' trying to restart
Mar 28 07:12:43.010846 *** INFO monit[593]: 'serial-getty' stop: '/bin/systemctl stop serial-getty@ttyS1.service'
Mar 28 07:12:43.132172 *** INFO monit[593]: 'serial-getty' start: '/bin/systemctl start serial-getty@ttyS1.service'
Mar 28 07:13:43.286276 *** INFO monit[593]: 'serial-getty' status succeeded (0) -- no output
```
#### Tested branch (Please provide the tested image version)
- [x] 20201231.77
#### Description for the changelog
[S6100] Improve S6100 serial-getty monitor.
#### Why I did it
Cherry-pick commits from master to support the snapshot based mirror, and fix the code conflicts. And add the last commit to fix the build broken issue according to the mirror change.
ad162ae0e [Build] Optimize the version control for Debian packages (https://github.com/sonic-net/sonic-buildimage/pull/14557)
38c5d7fce [Build] Support j2 template for debian sources for docker ptf (https://github.com/sonic-net/sonic-buildimage/pull/13198)
5e4826ebf [Ci] Support to use the same snapshot for all platform builds (#13913)
820692563 [Build] Change the default mirror version config file (#13786)
5e4a866e3 [Build] Support Debian snapshot mirror to improve build stability (#13097)
ac5d89c6a [Build] Support j2 template for debian sources (#12557)
Update golang version for telemetry build in sonic-slave-jessie to fix CVE-2021-33195, this PR will be merged into 201911 branch finally.
#### Why I did it
Go before 1.15.13 and 1.16.x before 1.16.5 has functions for DNS lookups that do not validate replies from DNS servers, and thus a return value may contain an unsafe injection (e.g., XSS) that does not conform to the RFC1035 format. Now in 201911 and 202012 branch we're using 1.14.2
##### Work item tracking
- Microsoft ADO **(number only)**:17727291
#### How I did it
Bump golang version into 1.15.15 which contains corresponding fix.
#### How to verify it
unit test to do sanity check.
Why I did it
If make fails, we can't rerun the make process, because existing patches can't apply again.
#13386 missed some change.
Work item tracking
Microsoft ADO (number only):
How I did it
Check if patches are applied. if yes, don't apply patches again.
How to verify it
Why I did it
[Submodule][202012] Advance sonic-restapi pointer
4f6f979 [Security] Fix the redis security issue CVE-2023-28858 and CVE-2023-28859 (#139)
Work item tracking
Microsoft ADO (number only): 17894593
How I did it
How to verify it
#### Why I did it
SONiC currently does not identify 'EdgeZoneAggregator' neighbor. As a result, the buffer profile attached to those interfaces uses the default cable length which could cause ingress packet drops due to insufficient headroom. Hence, there is a need to update the buffer templates to identify such neighbors and assign the same cable length as used by the T1.
Original PR for master: #14280
#### How I did it
Modified the buffer template to identify EdgeZoneAggregator as a neighbor device type and assign it the same cable length as a T1/leaf router.
#### How to verify it
Unit tests pass, and manually checked on a 7260 to see the changes take effect.
#### Description for the changelog
[Buffer] Added cable length config to buffer config template for EdgeZoneAggregator
#### Why I did it
Fix for link down issue seen with AOI 100G-PSM4 optics on 8102-64H-O [JIRA ID# MIGSMSFT-23]
#### How I did it
update platform module to 0.2.7
Why I did it
mmh3's new version 3.1.0 breaks pipeline build.
bullseye/buster/jessie pined the version to 2.5.1
How I did it
Pin mmh3's version as other dists.
How to verify it
Improve sudo cat command for RO user.
#### Why I did it
RO user can use sudo command show none syslog files.
#### How I did it
Improve sudo cat command for RO user.
#### How to verify it
Pass all UT.
Manually check fixed code work correctly.
#### Description for the changelog
Improve sudo cat command for RO user.
#### Why I did it
Bug in script that was passing in null as log level value if missing from config_db
#### How I did it
Added more robust conditional statement
#### How to verify it
1) Remove log_level from config db
2) config reload -y
3) telemetry should not crash
#### Why I did it
Update sonic-snmpagent submodule to include below commit:
Revert "[202012]: snmp vlan support per RFC1213 and added the missing support for RFC2863 (#279)" (#280)
Why I did it
sonic-slave-stretch build failed for mmh3 version update to 3.10 on Mar 24.
How I did it
Enable reproducible build for vhdx image.
How to verify it
**What I did**
Check /etc/pam.d/sshd integrity after modify it in hostcfgd.
**Why I did it**
Found some incident that /etc/pam.d/sshd become empty file during OR upgrade.
**How I verified it**
Pass all UT.
Add new UT to cover new code.
**Details if related**
This is a manually cherry-pick PR for https://github.com/sonic-net/sonic-host-services/pull/36
Backport #14372 to 202012
Why I did it
For better accounting purposes, updating the ingress lossy traffic profile to use static threshold. This change is only intended for Th devices using RDMA-CENTRIC profiles
How I did it
Update the buffer templates for Th devices in RDMA-CENTRIC folder to use the correct threshold
Signed-off-by: Neetha John <nejo@microsoft.com>
During the build process, a dsc file is retrieved from the URL:
http://deb.debian.org/debian/pool/main/i/isc-dhcp/isc-dhcp_4.4.1-2.3.dsc
Depending on the DNS resolution, the server reached may respond with a
HTTP 404 error code, what stops the build process.
In all cases, the URL http://deb.debian.org/debian/pool/main/i/isc-dhcp/
no more lists this DSC file but one with a different format.
The suffix "+deb11u1" is now appended to identify the debian version.
- append this suffix to the make file rules of isc-dhcp
Signed-off-by: Guillaume Lambert <guillaume.lambert@orange.com>
Co-authored-by: Guilt <guillaume.lambert@orange.com>
For sonic-platform-daemons following commits are added to the submodule
dd8fbae (HEAD -> 202012, origin/202012) [ycabled] add more coverage to ycabled; add minor name change for vendor API CLI return key-values pairs (#338)
846555e [thermalctld] fix some redundant removal of state DB tables (#315)
3d92fb9 Use github code scanning instead of LGTM (#316)
For sonic-utilities the following commits are added in this PR to the submodule
git log --oneline 39cdb49c..202012
ec4c6ea5 (HEAD -> 202012, origin/202012) [show][muxcable] add some new commands health, reset-cause, queue_info support for muxcable (#2414) (#2704)
03ef272e [202012][vlan] Remove add field of vlanid to DHCP_RELAY table while adding vlan (#2681)
e00a81ac [202012][dhcp-relay] Add support for dhcp_relay config cli (#2640)
274184e1 [vlan] Refresh dhcpv6_relay config while adding/deleting a vlan (#2660) (#2668
#### Why I did it
updating the submodule of sonic-platform-daemons, sonic-utilities
#### How I did it
updated the submodule
Why I did it
This PR addresses the issue mentioned above by loading the acl config as a service on a storage backend device
How I did it
The new acl service is a oneshot service which will start after swss and does some retries to ensure that the SWITCH_CAPABILITY info is present before attempting to load the acl rules. The service is also bound to sonic targets which ensures that it gets restarted during minigraph reload and config reload
How to verify it
Build an image with the following changes and did the following tests
Verified that acl is loaded successfully on a storage backend device after a switch boot up
Verified that acl is loaded successfully on a storage backend ToR after minigraph load and config reload
Verified that acl is not loaded if the device is not a storage backend ToR or the device does not have a DATAACL table
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Update dynamic threshold to -1 to get optimal performance for RDMA traffic
How I did it
Modified pg_profile_lookup.ini to reflect the correct value
Signed-off-by: Neetha John <nejo@microsoft.com>
