Why I did it
ConfigDB schema generated by minigraph parser can't pass yang validation.
How I did it
Modify minigraph.py, and use 'state' to replace 'status'.
How to verify it
Run UT for sonic-config-engine.
Use minigraph parser to generate ConfigDB schema, and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
end2end test is blocked by Yang model for BGP monitor.
How I did it
Create new yang files for BGP monitor, and add UT.
How to verify it
Follow the steps in #9711.
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
AAA yang model is not up to date.
#### How I did it
Add fallback and trace field, and replace boolean_type
#### How to verify it
Run UT for sonic_yang_models.
Follow the steps from #9710
Why I did it
Config db schema generated by minigraph can’t pass yang validation, bgp_asn must not be None.
How I did it
Update sampe-voq-graph.xml to add bgp_asn.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m tests/sample-voq-graph.xml -p tests/voq-sample-port-config.ini --print-data', and check bgp_asn.
Signed-off-by: Gang Lv ganglv@microsoft.com
Tested on a Celestica Seastone2 DX030 switch
Testing scenarios:
- Various QSFP ports in both normal and breakout config.
- 100G and 40G link speed show different colors.
- SFP1 port works.
Signed-off-by: Christian Svensson <blue@cmd.nu>
- Why I did it
For MSN4410/MSN4600/MSN4700 now they can support fetching PSU voltage threshold, no need to skip the psu voltage check in system health monitoring, so update the system health monitoring configuration file for these platforms.
- How I did it
remove skip PSU change config from the system_health_monitoring_config.json file
- How to verify it
Build image run on these platforms, system health monitoring will not report error against PSU voltage
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Optimize thermal control policies to simplify the logic and add more protection code in policies to make sure it works even if kernel algorithm does not work.
- How I did it
Reduce unused thermal policies
Add timely ASIC temperature check in thermal policy to make sure ASIC temperature and fan speed is coordinated
Minimum allowed fan speed now is calculated by max of the expected fan speed among all policies
Move some logic from fan.py to thermal.py to make it more readable
- How to verify it
1. Manual test
2. Regression
- Why I did it
MSN4700 platform has 8 lanes per port and thus can support 2x40G with each lane running at 10G
- How I did it
Added 40G to 2x200G breakout mode in platform.json
- How to verify it
Run config int break Ethernet0 2x40G[200G,100G,50G,25G,10G,1G]
And verify the command runs successfully and the port speed was set to 40G with a 2x breakout.
* Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
- Why I did it
The feature state can be a jinja template, like in this file - https://github.com/Azure/sonic-buildimage/blob/master/files/build_templates/init_cfg.json.j2#L39.
Without this change it is not possible to validate a configuration file.
- How I did it
Relaxes the constraint on feature state. Feature state leaf can be any string.
- How to verify it
Run UT.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Fixes#9561Fixes#9570Fixes#9563
Partial fix for #9556
#### Why I did it
- Attributes for dual ToR configs lack YANG model support
#### How I did it
- Extend YANG tests to cover dual ToR use cases
- Extend YANG model to cover dual ToR use cases
- Reduce the default log level to warning so only test failures are printed
#### How to verify it
- Run the YANG model unit tests
* fix workdir for seastone2
Signed-off-by: Viktor Ekmark <viktor@ekmark.se>
* seastone2: Add I2C SFP definition for SFP1
Signed-off-by: Christian Svensson <blue@cmd.nu>
* [device/cel_seastone_2] sfputil logic for SFP1
Earlier logic resulted in the name of SFP1 being SFP33 which is not
correct. The cannonical source is seastone2_fpga module and it calls it
SFP1, so ensure the logic does as well.
Signed-off-by: Christian Svensson <blue@cmd.nu>
* [device/cel_seastone_2] sysfs paths for SFP1
Various changes that plumbs the correct port presence and DOM decoding
for the SFP1 port.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Co-authored-by: Christian Svensson <blue@cmd.nu>
#### Why I did it
resolves https://github.com/Azure/sonic-buildimage/issues/8779
snmpd writes the below error message in syslog :
snmp#snmpd[27]: truncating integer value > 32 bits
This message is written in syslog when the hrSystemUptime(1.3.6.1.2.1.25.1.1.0 / system uptime) or sysUpTime(1.3.6.1.2.1.1.3 network management portion or snmpd uptime) is queried when either of these counters overflow beyond 32 bit value. This happens the device uptime or snmpd uptime is more than 497 days.
#### How I did it
Reference: https://access.redhat.com/solutions/367093 and https://linux.die.net/man/1/snmpcmd
To avoid seeing this message if the counter grows, the snmpd error log level is changed to display LOG_EMERG, LOG_ALERT, LOG_CRIT, and LOG_DEBUG.
Without this change, LOG_ERR and LOG_WARNING would also be logged in syslog.
#### How to verify it
On a device which is up for more than 497 days, modify supervisord.conf with the change and restart snmp.
Query 1.3.6.1.2.1.1.3 and verify that log message is not seen.
Why I did it
The existing log file size in sonic is 1 Mb. Over a period of time this leads to huge number of log files which becomes difficult for monitoring applications to handle.
Instead of large number of small files, the size of the log file is not set to 16 Mb which reduces the number of files over a period of time.
How I did it
Changed the size parameter and related macros in logrotate config for rsyslog
How to verify it
Execute logrotate manually and verify the limit when the file gets rotated.
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
- Why I did it
Add sensor conf for MSN4600C A1 platform
- How I did it
Add a new sensor conf file and relevant scripts to support two different versions of the platform
- How to verify it
Run "sensors" cmd to check the output on the A1 platform to see whether it's as expected.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
It should be handled by `ConfigDBConnector.typed_to_raw()`.
This is a bug for `sonic-cfggen -m --print-data` only
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {
"NULL": "NULL"
},
"PortChannel0002|Ethernet116": {
"NULL": "NULL"
},
"PortChannel0003|Ethernet120": {
"NULL": "NULL"
},
"PortChannel0004|Ethernet124": {
"NULL": "NULL"
}
},
```
But not appears in `sonic-cfgen -d --print-data`.
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {},
"PortChannel0002|Ethernet116": {},
"PortChannel0003|Ethernet120": {},
"PortChannel0004|Ethernet124": {}
},
```
Tested in a T0 KVM.
What I did:-
Enhanced minigraph parser to parse interface name associated with static route nexthop
Why I did:-
One of the use case to support interface name is Chassis Packet. For Chassis Packet we have Static Routes configured to route traffic across line-card. If the FRR programs static route without the interface name then in case if the ip interface that is associated with the nexthop goes down FRR resolves static route nexthop over the default route as we have FRR config ip nht-resolve-via-default which causes undesired behavior. Having interface name with Static Route prevents recursive lookup on default route.
How I verify:
Updated unit-test cases
Manual verification
dd71848 [GCU] Show default option for '--format' (#2003)
f296e76 [GCU] Disallowing DeleteInsteadOfReplaceMoveExtender from generating delete whole config move (#2006)
731d643 [flow counter] Fix issue: should not compare str with int (#2001)
e628f01 Support CLI for buffer queue configuration (#1965)
585fd40 Fix show ip bgp nei command rw required issue (#2011)
Update ztp sub module to include the below fixes:
f7dd3c5 [sonic-ztp]Fixing build failure after bullseye integration (#30)
9218e16 Replace swsssdk.ConfigDBConnector and SonicV2Connector with swsscommon(#28)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
* Add boolean as typedef to sonic-types
* Fix boolean in sonic-feature yang model
* Fix boolean in sonic-flex_counter yang model
#### Why I did it
It was request to cherry-pick fix from master (#9418) to 202111 branch to fix issue when boolean is used in different literal cases.
#### How I did it
Added boolean to sonic-types as typedef with different literal cases.
#### How to verify it
Run the command config interface breakout <interface_name> <breakout_mode>
4236bc4 [config reload] Fixing config reload when timer based delayed services are disabled (#1967)
d2514e4 [GCU] Different apply-patch runs should produce same sorted steps (#1988)
2878adb [GCU] Using simulated config instead of target config when validating replace operation in NoDependencyMoveValidator (#1987)
fb8ca98 [GCU] Loading yang-models only once (#1981)
f88ee92 [GCU] Copying config_db before callding sonic_yang.loadData (#1983)
9ed0e91 [GCU] Implementing DryRun by printing patch-sorter steps/imitating config_db (#1973)
b36b5e3 [GCU] Moving PatchSorter unit-test to json file to make it easier to read/maintain (#1977)
c0fa28b [generic-config-updater] Improving CreateOnly validator and marking /LOOPBACK_INTERFACE/LOOPBACK#/vrf_name as create-only (#1969)
0559d04 [generic-config-updater] Adding non-strict mode (#1929)
b07f477 [debug dump util] FDB debug dump util changes (#1968)
6d8757a [warm/fast-reboot] Fix kexec portion to support platforms based on Device Tree (#1966)
cc1409e [Auto Techsupport] Event driven Techsupport Bug Fixes (#1986)
6c48bd5 Fix wrong help message for cable length setting (#1978)
c0bbbe3 [breakout] Fix the check when port is not present in BREAKOUT_CFG table (#1765)
5bb8cad [doc][DPB] Update DPB related interface breakout command Info (#1438)
e6fd990 [config] Fix 'config reload -l' command to get filename by default (#1611)
bd8f7bb Update swss_ready check to check per namespace swss service (#1974)
5439f94 [soft-reboot] Add support for platforms based on Device Tree (#1963)
7c5810a [config] Add portchannel support for static route (#1857)
7cb6a1b preserve old order for config reload (#1964)
20bddbd [Auto-Techsupport] Issues related to Multiple Cores crashing handled (#1948)
On a multi-asic Supervisor card, running commands like
'show interface counter' opens a confid_db connection per
namespace per interface which results in many duplicate connections
exceeding the allowed open file handles. This causes the command to fail.
Caching the connections to prevent duplicate handles.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, there's no Vlan31 in 'VLAN' table.
How I did it
Update test minigraph to add vlan interface.
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m tests/fg-ecmp-sample-minigraph.xml -p tests/mellanox-sample-port-config.ini --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
'SYSLOG_SERVER': {'': {}, '10.0.10.5': {}, '10.0.10.6': {}},
Config db schema generated by minigraph can’t pass yang validation, server address can't be empty.
How I did it
Update test minigraph to remove wrong configuration.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and SYSLOG_SERVERS table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, portchannel_member has invalid port.
How I did it
Update test minigraph to remove invalid port channel.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check port channel member.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update test minigraph to fix interface
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check interface table and port table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update minigraph xml to add DeploymentId.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check deployment_id field.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, and there's no 'alias' field in yang model.
Minigraph parser supports 'alias' field for VLAN.
How I did it
Add 'alias' field to sonic-vlan.yang
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m xxx.xml --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Signed-off-by: Neetha John <nejo@microsoft.com>
Bring back the changes in #9226 that were reverted. Unable to do a revert-revert.
Why I did it
Few device types were missing in the DEVICE_METADATA type field
How I did it
Added missing device types to the device metadata yang
Why I did it
#9122
DEVICE_METADATA does not have cloudtype and region.
How I did it
Add cloudtype and region to DEVICE_METADATA.
How to verify it
Follow the steps in #9122.
Build sonic-yang-model.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Add yang model for syslog server
How I did it
Add new file sonic-syslog.yang and new files for tests
How to verify it
Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/1871
From [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) we call `sonic-yang-mgmt` multiple times in order to check a certain change to ConfigDb is valid or not. It is expected for some changes to be invalid, so always printing errors from `sonic-yang-mgmt` makes the output hard to read.
In this PR, we are adding a way to control if logs should be printed or not.
#### How I did it
- Added `print_log_enabled` flag to sonic_yang ctor
- Converted all `print` statements to `sysLog(..., doPrint=True)`
#### How to verify it
unit-test passing means the change did not break logs.
#### Info about libyang logging
libyang provides an extensive logging logic which can support a lot of scenarios:
- ly_log_level: setting logging level
- LY_LLERR
- LY_LLWRN
- ...
- ly_set_log_clb: setting log callback to customize the default behavior which is printing the msgs
- ly_log_options: setting logging options
- LY_LOLOG: If callback is set use it, otherwise just print. If flag is not set, do nothing.
- ...
For more info refer to:
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__logopts.html#gaff80501597ed76344a679be2b90a1d0a
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__log.html#gac88b78694dfe9efe0450a69603f7eceb
#### What's next?
Consume the new flag `print_log_enabled` in [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) to reduce the logging clutter.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Fix issue https://github.com/Azure/sonic-utilities/issues/1962
The problem is current implementation of [sonic-yang-mgmt::find_data_dependencies](f2774b635d/src/sonic-yang-mgmt/sonic_yang.py (L518)) does not get referrers if they are using `must` statement, it has to use `leafref`.
For now we can convert `must` to `leafref` if possible. In the future we will investigate get referrers by `must` statements as well https://github.com/Azure/sonic-buildimage/issues/9534
#### How I did it
Instead of `must` use `leafref`
#### How to verify it
unit-test
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Why I did it
Fixing issue #9294
#### How I did it
Updating ACL yang model
#### How to verify it
Validating issue with `config patch-apply` is fixed.
- Start a KVM
- Add file `add-ctrl-plane-tbl.json-patch ` with content:
```json
[
{
"op": "add",
"path": "/ACL_TABLE/ACTRLPLANETABLE",
"value": {
"policy_desc": "ACTRLPLANETABLE",
"services": [
"SSH"
],
"stage": "ingress",
"type": "CTRLPLANE"
}
}
]
```
- Run `sudo config apply-patch add-ctrl-plane-tbl.json-patch`
Before:
```
Patch Applier: The patch was sorted into 4 changes:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"type": "CTRLPLANE"}}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/policy_desc", "value": "ACTRLPLANETABLE"}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/services", "value": ["SSH"]}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/stage", "value": "ingress"}]
```
After:
```
Patch Applier: The patch was sorted into 1 change:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"policy_desc": "ACTRLPLANETABLE", "services": ["SSH"], "stage": "ingress", "type": "CTRLPLANE"}}]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Recently additional sensors that were needed only for specific system added to all systems and caused errors.
How I did it
* Include CPU board and switch board sensors only on SN2201 system
* Fix issue in test_chassis_thermal, now it skips non existing thermals.
How to verify it
Run show platform temperature
Signed-off-by: liora <liora@nvidia.com>
Why I did it
To include newer Fan LED, thermal capabilities fields in platform.json of DellEMC S6000, S6100, Z9332f platforms.
How I did it
Add the capabilities fields in each platform's respective platform.json.
How to verify it
Ran sonic-mgmt platform api test cases that use capabilities fields and verified that the results are as expected.
- Why I did it
Add new Spectrum-4 system support SN5600 on top of Nvidia ASIC simulator.
- How I did it
Add all relevant system and simulator SKU.
Updated syseeprom.hex and related directories to reflect Nvidia SN5600 brand name.
- How to verify it
Tested init flow, basic show commands, up interfaces, traffic test.
Signed-off-by: Raphael Tryster <raphaelt@nvidia.com>
Why I did it
Fix typo and missing files in SN3800 and SN4600C's buffer templates
How I did it
ingress_lossless_xoff_size => ingress_lossless_pool_xoff add missing files for SN4600C-D100C12S2
How to verify it
Deploy the fix and verify whether the device can be up.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
