In the PR sonic-net/sonic-utilities#2850 , for support remote access of linecards paramiko package is installed in sonic-utilities. libffi-dev needs to installed to be able to compile for armhf image
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
Fix the issue where db_migrator is called before DB is loaded w/ config. This leads to db_migrator:
Not finding anything, and resumes to incorrectly migrate every missing config
This is not expected. migration should happen after the old config is loaded and only new schema changes need migration.
Since DB does not have anything when migrator is called, db_migrator fails when some APIs return None.
The reason for incorrect call is that:
database service starts db_migrator as part of startup sequence.
config-setup service loads data from old-config/minigraph. However, since it has Requires=database.service.
Hence, config-setup starts only when database service is started. And database service is started when db_migrator is completed.
Fixed by:
Check if this is first time boot by checking pending_config_migration flag.
If pending_config_migration is enabled, then do not call db_migrator as part of database service startup.
Let database service start which triggers config-setup service to start.
Now call db_migrator after when config-setup service loads old-config/minigraph
* Update PG headroom settings ports based on port speed/cable length
* Updated XOFF settings to use chip level numbers than core
* Updated PG headroom based on uplink/downlink side
* fix for sonic-config-gen tests
* More fixes for unit test cases
* more test fixes
* Merged multiple functions into one
Why I did it
Current regex not able to capture logs, modify regex to capture syslog messages
Work item tracking
Microsoft ADO (number only): 13366345
How I did it
Code change
How to verify it
sonic-mgmt test case
- Why I did it
We suspect the issue #13791 is caused by redis server being temporarily unavailable during system initialization so we do not use -d in sonic-cfggen, for now, to avoid accessing redis server
- How I did it
Provide a string containing required json data when calling sonic-cfggen
- How to verify it
Manually test it
Signed-off-by: Stephen Sun <stephens@nvidia.com>
rasdaemon is a tool to log hardware errors. It takes 100% CPU during
boot for a few seconds. It impacts fast/warm boot by delaying control
plane restoration for 5 sec on some platforms.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
Implementing code changes for https://github.com/sonic-net/SONiC/pull/1203
#### How I did it
Removed the timers and delayed target since the delayed services would start based on event driven approach.
Cleared port table during config reload and cold reboot scenario.
Modified yang model, init_cfg.json to change has_timer to delayed
#### How to verify it
Running regression
Why I did it
Fixes#14179
chassis-packet: missing arp entries for static routes causing high orchagent cpu usage
It is observed that some sonic-mgmt test case calls sonic-clear arp, which clears the static arp entries as well. Orchagent or arp_update process does not try to resolve the missing arp entries after clear.
How I did it
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping if any
found to resolve it.
How to verify it
After boot or config reload, check ipv4 and ipv4 neigh entries to make sure all static route entries are present
manual validation:
Use sonic-clear arp and sonic-clear ndp to clear all neighbor entries
run arp_update
Check for neigh entries. All entries should be present.
Testing on T0 setup route/for test_static_route.py
The test set the STATIC_ROUTE entry in conifg db without ifname:
sonic-db-cli CONFIG_DB hmset 'STATIC_ROUTE|2.2.2.0/24' nexthop 192.168.0.18,192.168.0.25,192.168.0.23
"STATIC_ROUTE": {
"2.2.2.0/24": {
"nexthop": "192.168.0.18,192.168.0.25,192.168.0.23"
}
},
Validate that the arp_update gets the proper ARP_UPDATE_VARDS using arp_update_vars.j2 template from config db and does not crash:
{ "switch_type": "", "interface": "", "pc_interface" : "PortChannel101 PortChannel102 PortChannel103 PortChannel104 ", "vlan_sub_interface": "", "vlan" : "Vlan1000", "static_route_nexthops": "192.168.0.18 192.168.0.25 192.168.0.23 ", "static_route_ifnames": "" }
validate route/test_static_route.py testcase pass.
Why I did it
Support to add SONiC OS Version in device info.
It will be used to display the version info in the SONiC command "show version". The version is used to do the FIPS certification. We do not do the FIPS certification on a specific release, but on the SONiC OS Version.
SONiC Software Version: SONiC.master-13812.218661-7d94c0c28
SONiC OS Version: 11
Distribution: Debian 11.6
Kernel: 5.10.0-18-2-amd64
How I did it
#### Why I did it
Enhance the error message output mechanism during swss docker creating
#### How I did it
Capture the output to stderr of `sonic-cfggen` and output it using `echo` to make sure the error message will be logged in syslog.
#### How to verify it
Manually test
Why I did it
All these 3 services started after swss service, which used to start after interface-config service. But #13084 remove the time constraints for swss.
After that, these 3 services has the chance of start earlier when the inteface-config service is restarting the networking service, which could cause db connect request to fail.
How I did it
Delay mux/sflow/snmp timer after the interface-config service.
How to verify it
PR test.
Config reload can repro the issue in 1-3 retries. With this change. config reload run 30+ iterations without hitting the issue.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping to
resolve the missing entry.
Why I did it
Fixes#14179
chassis-packet: missing arp entries for static routes causing high orchagent cpu usage
It is observed that some sonic-mgmt test case calls sonic-clear arp, which clears the static arp entries as well. Orchagent or arp_update process does not try to resolve the missing arp entries after clear.
How I did it
arp_update should resolve the missing arp/ndp static route
entries. Added code to check for missing entries and try ping if any
found to resolve it.
How to verify it
After boot or config reload, check ipv4 and ipv4 neigh entries to make sure all static route entries are present
manual validation:
Use sonic-clear arp and sonic-clear ndp to clear all neighbor entries
run arp_update
Check for neigh entries. All entries should be present.
Signed-off-by: anamehra <anamehra@cisco.com>
Why I did it
SONiC currently does not identify 'EdgeZoneAggregator' neighbor. As a result, the buffer profile attached to those interfaces uses the default cable length which could cause ingress packet drops due to insufficient headroom. Hence, there is a need to update the buffer templates to identify such neighbors and assign the same cable length as used by the T1.
How I did it
Modified the buffer template to identify EdgeZoneAggregator as a neighbor device type and assign it the same cable length as a T1/leaf router.
How to verify it
Unit tests pass, and manually checked on a 7260 to see the changes take effect.
Signed-off-by: dojha <devojha@microsoft.com>
Why I did it
This PR addresses the issue mentioned above by loading the acl config as a service on a storage backend device
How I did it
The new acl service is a oneshot service which will start after swss and does some retries to ensure that the SWITCH_CAPABILITY info is present before attempting to load the acl rules. The service is also bound to sonic targets which ensures that it gets restarted during minigraph reload and config reload
How to verify it
Build an image with the following changes and did the following tests
Verified that acl is loaded successfully on a storage backend device after a switch boot up
Verified that acl is loaded successfully on a storage backend ToR after minigraph load and config reload
Verified that acl is not loaded if the device is not a storage backend ToR or the device does not have a DATAACL table
Signed-off-by: Neetha John <nejo@microsoft.com>
- Why I did it
Add Secure Boot support to SONiC OS.
Secure Boot (SB) is a verification mechanism for ensuring that code launched by a computer's UEFI firmware is trusted. It is designed to protect a system against malicious code being loaded and executed early in the boot process before the operating system has been loaded.
- How I did it
Added a signing process to sign the following components:
shim, grub, Linux kernel, and kernel modules when doing the build, and when feature is enabled in build time according to the HLD explanations (the feature is disabled by default).
- How to verify it
There are self-verifications of each boot component when building the image, in addition, there is an existing end-to-end test in sonic-mgmt repo that checks that the boot succeeds when loading a secure system (details below).
How to build a sonic image with secure boot feature: (more description in HLD)
Required to use the following build flags from rules/config:
SECURE_UPGRADE_MODE="dev"
SECURE_UPGRADE_DEV_SIGNING_KEY="/path/to/private/key.pem"
SECURE_UPGRADE_DEV_SIGNING_CERT="/path/to/cert/key.pem"
After setting those flags should build the sonic-buildimage.
Before installing the image, should prepared the setup (switch device) with the follow:
check that the device support UEFI
stored pub keys in UEFI DB
enabled Secure Boot flag in UEFI
How to run a test that verify the Secure Boot flow:
The existing test "test_upgrade_path" under "sonic-mgmt/tests/upgrade_path/test_upgrade_path", is enough to validate proper boot
You need to specify the following arguments:
Base_image_list your_secure_image
Taget_image_list your_second_secure_image
Upgrade_type cold
And run the test, basically the test will install the base image given in the parameter and then upgrade to target image by doing cold reboot and validates all the services are up and working correctly
Fixes#13568
Upgrade from old image always requires squashfs mount to get the next image FW binary. This can be avoided if we put FW binary under platform directory which is easily accessible after installation:
admin@r-spider-05:~$ ls /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
/host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
admin@r-spider-05:~$ ls -al /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa
lrwxrwxrwx 1 root root 66 Feb 8 17:57 /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa -> /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
- Why I did it
202211 and above uses different squashfs compression type that 201911 kernel can not handle. Therefore, we avoid mounting squashfs altogether with this change.
- How I did it
Place FW binary under /host/image-/platform/mlnx/, soft links in /etc/mlnx are created to avoid breaking existing scripts/automation.
/etc/mlnx/fw-SPCX.mfa is a soft link always pointing to the FW that should be used in current image
mlnx-fw-upgrade.sh is updated to prefer /host/image-/platform/mlnx location and fallback to /etc/mlnx in squashfs in case new location does not exist. This is necessary to do image downgrade.
- How to verify it
Upgrade from 201911 to master
master to 201911 downgrade
master -> master reboot
ONIE -> master boot (First FW burn)
Which release branch to backport (provide reason below if selected)
- Why I did it
FW for Spectrum-4 ASIC not yet available
- How I did it
Remove in Mellanox fw make files to Spectrum-4 ASIC firmware binaries.
Remove from firmware upgrade scripts to be able Spectrum-4 ASIC.
- How to verify it
Run regression test
- Why I did it
Need to add the possibility to choose between dropping packets (using ACL) on ingress or egress in Dual ToR scenario
- How I did it
Add new attribute "mux_tunnel_ingress_acl" to SYSTEM_DEFAULTS table
- How to verify it
check that new attribute exists in redis:
admin@sonic:~$ redis-cli -n 4
127.0.0.1:6379[4]> HGETALL SYSTEM_DEFAULTS|mux_tunnel_ingress_acl
1."state"
2."false"
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Fixe #12047. After the c++ implementation of the sonic-db-cli, sonic-db-cli PING command tries to initialize the global database for all instances database starting. If all instance database-config.json are not ready yet. it will crash and generate core file. PR sonic-net/sonic-swss-common#701 only fix the crash and the process abortion.
Signed-off-by: mlok <marty.lok@nokia.com>
Signed-off-by: Zhixin Zhu zhixzhu@cisco.com
Why I did it
backplane ports cable length need to be specified.
How I did it
separated handling for the specific port name.
- Why I did it
Support DSCP remapping in dual ToR topo on T0 switch for SKU Mellanox-SN4600c-C64, Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8.
- How I did it
Regarding buffer settings, originally, there are two lossless PGs and queues 3, 4. In dual ToR scenario, the lossless traffic from the leaf switch to the uplink of the ToR switch can be bounced back.
To avoid PFC deadlock, we need to map the bounce-back lossless traffic to different PGs and queues. Therefore, 2 additional lossless PGs and queues are allocated on uplink ports on ToR switches.
On uplink ports, map DSCP 2/6 to TC 2/6 respectively
On downlink ports, both DSCP 2/6 are still mapped to TC 1
Buffer adjusted according to the ports information:
Mellanox-SN4600c-C64:
56 downlinks 50G + 8 uplinks 100G
Mellanox-SN4600c-D48C40, Mellanox-SN2700, Mellanox-SN2700-D48C8:
24 downlinks 50G + 8 uplinks 100G
- How to verify it
Unit test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
In to-sonic and multi-asic KVM-test, pretest sometimes failed. Reason is rsyslogd process can not start in teamd container. Because rsyslog.conf is empty caused by sonic-cfggen execute failed
- How I did it
If sonic-cfggen -d execute failed, execute without -d because the template file has the default value.
- How to verify it
Build image and test it over 40 times, all passed pretest.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
- Why I did it
Added platform specific script to be invoked during SAI failure dump. Added some generic changes to mount /var/log/sai_failure_dump as read write in the syncd docker
- How I did it
Added script in docker-syncd of mellanox and copied it to /usr/bin
- How to verify it
Manual UT and new sonic-mgmt tests
* Add support for platform topology configuration service
This service invokes the platform plugin for platform specific topology
configuration.
The path for platform plugin script is:
/usr/share/sonic/device/$PLATFORM/plugins/config-topology.sh
If the platform plugin is not available, this service does nothing.
Signed-off-by: anamehra <anamehra@cisco.com>
After upgrade to brcmsai 8.1, the sdk running environment (container) recommended with mininum memory size as below
TH4/TD4(ltsw) uses 512MB
TH3 used 300MB
Helix4/TD2/TD3/TH/TH 256 MB
Base on this requirement, adjust the default syncd share memory size and set the memory size for special ACISs in platform_env.conf file for different types of Broadcom ASICs.
How I did it
Add the platform_env.conf file if none of it for broadcom platform (base on platform_asic file)
Add the 'SYNCD_SHM_SIZE' and set the value
for ltsw(TD4/TH4) devices set to 512M at least (update the platform_env.conf)
for Td2/TH2/TH devices set to 256M
for TH3 set to 300M
verify
How to verify it
verify the image with code fix
Check with UT
Check on lab devices
On a problematic device which cannot start successfully
Run with the command
$ cat /proc/linux-kernel-bde
Broadcom Device Enumerator (linux-kernel-bde)
Module parameters:
maxpayload=128
usemsi=0
dmasize=32M
himem=(null)
himemaddr=(null)
DMA Memory (kernel): 33554432 bytes, 0 used, 33554432 free, local mmap
No devices found
$ docker rm -f syncd
syncd
$ sudo /usr/bin/syncd.sh start
Cannot get Broadcom Chip Id. Skip set SYNCD_SHM_SIZE.
Creating new syncd container with HWSKU Force10-S6000
a4862129a7fea04f00ed71a88715eac65a41cdae51c3158f9cdd7de3ccc3dd31
$ docker inspect syncd | grep -i shm
"ShmSize": 67108864,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
On Normal device
$ docker inspect syncd | grep -i shm
"ShmSize": 268435456,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e"
change the config syncd_shm.ini to b85=128m
$ docker rm -f syncd
syncd
$ sudo /usr/bin/syncd.sh start
Creating new syncd container with HWSKU Force10-S6000
3209ffc1e5a7224b99640eb9a286c4c7aa66a2e6a322be32fb7fe2113bb9524c
$ docker inspect syncd | grep -i shm
"ShmSize": 134217728,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
change the config under
/usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/Force10-S6000/platform_env.conf
and run command
$ cat /usr/share/sonic/device/x86_64-dell_s6000_s1220-r0/platform_env.conf
SYNCD_SHM_SIZE=300m
$ sudo /usr/bin/syncd.sh start
Creating new syncd container with HWSKU Force10-S6000
897f6fcde1f669ad2caab7da4326079abd7e811bf73f018c6dacc24cf24bfda5
$ docker inspect syncd | grep -i shm
"ShmSize": 314572800,
"Tag": "fix_8.1_shm_issue.67873427-9f7ca60a0e",
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Why I did it
In the voq chassis the buffer_queue configuration needs to be applied on system_port instead of the sonic port.
This PR has the change to do this.
How I did it
Modify buffer_config.j2 to generate buffer_queue configuration on system_ports if the device is Voq Chassis
How to verify it
Verify the buffer_queue configuration is generated properly using sonic-cfggen
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
The followup to #12920 PR.
If the feature compilation is disabled its configuration should not be included into init_cfg.json.
- How I did it
Update init_cfg.json.j2 template to include teamd and radv features configuration only if their compilation is enabled.
- How to verify it
The default behavior is preserved. To verify the changes compile the image without overriding INCLUDE_TEAMD and INCLUDE_ROUTER_ADVERTISER options. The generated /etc/sonic/init_cfg.json should remain with no changes. Install the image and verify that both teamd and radv containers are present and running. Verify that feature state returned by show feature status command is enabled.
Change the INCLUDE_TEAMD or INCLUDE_ROUTER_ADVERTISER value to "n". Compile and install the image. Verify that feature configuration is not included in generated /etc/sonic/init_cfg.json file. Verify that show feature status output doesn't include the feature.
- Why I did it
Remove dependency on interfaces-config.service to speed up boot, because interfaces-config.service takes a lot of time on boot.
- How I did it
Changed service files for swss, syncd.
- How to verify it
Boot and check swss/syncd start time comparing to interfaces-config
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
Debian is shipping a systemd timer unit for logrotate, but we're also
packaging in a cron job, which means both of them will run, potentially
at the same time. Remove our cron file, and add an override to the
shipped timer file to have it be run every 10 minutes.
Fixes#12392.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
During docker build, host files can be passed to the docker build through
docker context files. But there is no straightforward way to transfer
the files from docker build to host.
This feature provides a tricky way to pass the cache contents from docker
build to host. It tar's the cached content and encodes them as base64 format
and passes it through a log file with a special tag as 'VCSTART and VCENT'.
Slave.mk in the host, it extracts the cache contents from the log and stores them
in the cache folder. Cache contents are encoded as base64 format for
easy passing.
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
#### How I did it
#### How to verify it
- Why I did it
Add support for compiling Spectrum-4 ASIC firmware to the SONiC image
Add support for Spectrum-4 ASIC firmware upgrade
- How I did it
Update Mellanox fw make files to include Spectrum-4 ASIC firmware binaries.
Update firmware upgrade scripts to be able to detect Spectrum-4 ASIC.
- How to verify it
Run regression tests
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
The PR is to apply separated DSCP_TO_TC_MAP and TC_TO_QUEUE_MAP to uplink ports on dualtor.
The traffic with DSCP 2 and DSCP 6 from T1 is treated as lossless traffic.
DSCP TC Queue
2 2 2
6 6 6
Traffic with DSCP 2 or DSCP 6 from downlink is still treated as lossy traffic as before.
How I did it
Define DSCP_TO_TC_MAP|AZURE_UPLINK and TC_TO_QUEUE_MAP|AZURE_UPLINK.
How to verify it
Verified by UT
Verified by coping the new template to a testbed, and rendering a config_db.json
Why I did it
The current lazy installer relies on a filename sort for both unpack and configuration steps. When systemd services are configured [started] by multiple packages the order is by filename not by the declared package dependencies. This can cause the start order of services to differ between first-boot and subsequent boots. Declared systemd service dependencies further exacerbate the issue (e.g. blocking the first-boot script).
The current installer leaves packages un-configured if the package dependency order does not match the filename order.
This also fixes a trivial bug in [Build]: Support to use symbol links for lazy installation targets to reduce the image size #10923 where externally downloaded dependencies are duplicated across lazy package device directories.
How I did it
Changed the staging and first-boot scripts to use apt-get:
dpkg -i /host/image-$SONIC_VERSION/platform/$platform/*.deb
becomes
apt-get -y install /host/image-$SONIC_VERSION/platform/$platform/*.deb
when dependencies are detected during image staging.
How to verify it
Apt-get critical rules
Add a Depends= to the control information of a package. Grep the syslog for rc.local between images and observe the configuration order of packages change.
Added Support to runtime render bgp and teamd feature `state` and lldp `has_asic_scope` flag
Needed for SONiC on chassis.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Co-authored-by: mlok <marty.lok@nokia.com>
#### Why I did it
Currently at the Azure build system, the P4RT container is disabled by default at the build time. Here the goal is to include the P4RT container at the build time while disabling it at the runtime. The user can enable/disable the p4rt app through the config based on the preference.
#### How I did it
Changed the config in rules/config and init-cfg.json.j2
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
What I did
Adding the dynamic headroom calculation support for Barefoot platforms.
Why I did it
Enabling dynamic mode for barefoot case.
How I verified it
The community tests are adjusted and pass.
* Add smartmontools to pmon docker
* Set smartmontools to install version 7.2-1 in pmon to match host; clean up smartmontools build files
* Add comments on smartmontools version for both host and pmon
Why I did it
BGP service has always been starting after interface-config. However, recently we discovered an issue where some BGP sessions are unable to establish due to BGP daemon not able to read the interface IP.
This issue was clearly observed after upgrading to FRR 8.2.2. See more details in #12380.
How I did it
Delaying starting BGP seems to be a workaround for this issue.
However, caution is that this delay might impact warm reboot timing and other timing sequences.
This workaround is reducing the probability of hitting the issue by close to 100X. However, this workaround is not bulletproof as test shows. It is still preferrable to have a proper FRR fix and revert this change in the future.
How to verify it
Continuously issuing config reload and check BGP session status afterwards.
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Remove swsssdk from sonic OS image and docker image
#### Why I did it
swsssdk is deprecated, so need remove from image.
#### How I did it
Update config file to remove swsssdk from image.
#### How to verify it
Pass all test case.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Remove swsssdk from sonic OS image and docker image
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
interfaces-config service restarts networking service, during the restart loopback interface address is being removed and reassigned back, leaving loopback without an ipv4 address for a while.
On SONiC startup and config reload interfaces-config and bgp services start in parallel and sometimes
fpmsyncd in bgp attempts bind to loopback while it does not have an address, fails with the log
Exception "Cannot assign requested address" had been thrown in daemon
and exits with rc 0.
root@sonic:/# supervisorctl status
fpmsyncd EXITED Jul 20 05:04 AM
zebra RUNNING pid 35, uptime 6:15:05
zsocket EXITED Jul 20 05:04 AM
docker logs bgp
INFO exited: fpmsyncd (exit status 0; expected)
With fpmsyncd dead, configured routes do not appear in the database.
- How I did it
Added ordering dependency on interfaces-config service into bgp.config
- How to verify it
Itself the issue reproduces quite rarely, but one can gain the time interval between networking down and networking up in interfaces-config.sh like this:
diff --git a/files/image_config/interfaces/interfaces-config.sh b/files/image_config/interfaces/interfaces-config.sh
index f6aa4147a..87caceeff 100755
--- a/files/image_config/interfaces/interfaces-config.sh
+++ b/files/image_config/interfaces/interfaces-config.sh
@@ -63,7 +63,11 @@ done
# Read sysctl conf files again
sysctl -p /etc/sysctl.d/90-dhcp6-systcl.conf
-systemctl restart networking
+# systemctl restart networking
+
+systemctl start networking
+sleep 10
+systemctl stop networking
# Clean-up created files
rm -f /tmp/ztp_input.json /tmp/ztp_port_data.json
with this change the issue reproduces on every config reload.
Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
* Make client indentity by AME cert
* Join k8s cluster by ipv6
* Change join test cases
* Test case bug fix
* Improve read node label func
* Configure kubelet and change test cases
* For kubernetes version 1.22.2
* Fix undefine issue
Signed-off-by: Yun Li <yunli1@microsoft.com>
Multi-asic Docker instances are created behind Docker's default bridge
which doesn't allow talking to other Docker instances that are in the
host network (like database-chassis).
On linecards, we configure midplane interfaces to let per-asic docker
containers talk to CHASSIS_DB on the supervisor through internal chassis
network.
On the supervisor we don't need to use chassis internal network, but we
still need a similar setup in order to allow fabric containers to talk
to database-chassis
The timer execution may fail if triggered during a config reload
(when the sonic.target is stopped). This might happen in a rare
situation if config reload is executed after reboot in a small
time slot (for 0 to 30 seconds) before the tacacs-config timer
is triggered. To ensure that timer execution will be resumed after
a config reload the WantedBy section of the systemd service is updated
to describe relation to sonic.target.
Signed-off-by: Oleksandr Ivantsiv <oivantsiv@nvidia.com>
Signed-off-by: Oleksandr Ivantsiv <oivantsiv@nvidia.com>
With this PR in, you flap BGP and use events_tool to see the published events.
With telemetry PR #111 in and corresponding submodule update done in buildimage, one could run gnmi_cli to capture BGP flap events.
* [mux] skip mux operations during warm shutdown
- Enhance write_standby.py script to skip actions during warm shutdown.
- Expand the support to BGP service.
- MuX support was added by a previous PR.
- don't skip action during warm recovery
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* Add k8s master feature
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update kubernetes version mistake and make variable passing clear
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Add CRI-dockerd package
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update version variable passing logic
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Upgrade the worker kubernetes version
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Install xml file parse tool
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Yun Li <yunli1@microsoft.com>
*Preventing ebtables rules to be applied on KVM image. The ebtables rules in SONiC are added to prevent ARP as well as L2 forwarding to be blocked in linux kernel since the hardware will take care of the actual L2 forward. However this is not the case with KVM where linux needs to forward even L2 packets
What I did:
Following changes done for packet based chassis:-
1> Run arp_update on LC's to resolve static route nexthops over backend
port-channel interfaces.
2> On Supervisor make sure arp_update exit gracefully
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
- Why I did it
Support Mellanox-SN4600C-C64 as T1 switch in dual-ToR scenario
This is to port #11032 and #11299 from 202012 to master.
Support additional queue and PG in buffer templates, including both traditional and dynamic model
Support mapping DSCP 2/6 to lossless traffic in the QoS template.
Add macros to generate additional lossless PG in the dynamic model
Adjust the order in which the generic/dedicated (with additional lossless queues) macros are checked and called to generate buffer tables in common template buffers_config.j2
Buffer tables are rendered via using macros.
Both generic and dedicated macros are defined on our platform. Currently, the generic one is called as long as it is defined, which causes the generic one always being called on our platform. To avoid it, the dedicated macrio is checked and called first and then the generic ones.
Support MAP_PFC_PRIORITY_TO_PRIORITY_GROUP on ports with additional lossless queues.
On Mellanox-SN4600C-C64, buffer configuration for t1 is calculated as:
40 * 100G downlink ports with 4 lossless PGs/queues, 1 lossy PG, and 3 lossy queues
16 * 100G uplink ports with 2 lossless PGs/queues, 1 lossy PG, and 5 lossy queues
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
This PR is to add a flag to control whether to generate PORT_QOS_MAP|global entry or not.
It's because for some HWSKU, such as BackEndToRRouter and BackEndLeafRouter, there is no DSCP_TO_TC_MAP defined.
Hence, if the PORT_QOS_MAP|global entry is generated, OA will report some error because the DSCP_TO_TC_MAP map AZURE can not be found.
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- saiObjectTypeQuery: invalid object id oid:0x7fddb43605d0
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- meta_generic_validation_objlist: SAI_SWITCH_ATTR_QOS_DSCP_TO_TC_MAP:SAI_ATTR_VALUE_TYPE_OBJECT_ID object on list [0] oid 0x7fddb43605d0 is not valid, returned null object id
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- applyDscpToTcMapToSwitch: Failed to apply DSCP_TO_TC QoS map to switch rv:-5
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- doTask: Failed to process QOS task, drop it
This PR is to address the issue.
How I did it
Add a flag require_global_dscp_to_tc_map to control whether to generate the PORT_QOS_MAP|global entry. The default value for require_global_dscp_to_tc_map is true. If the device type is storage backend, the value is changed to false. Then the PORT_QOS_MAP|global entry is not generated.
How to verify it
Update the current test_qos_dscp_remapping_render_template to cover storage backend.
Refactors the SONiC Installer to support greater flexibility in building for a given architecture and bootloader.
#### Why I did it
Currently the SONiC installer assumes that if a platform is ARM based that it uses the `uboot` bootloader and uses the `grub` bootloader otherwise. This is not a correct assumption to make as ARM is not strictly tied to uboot and x86 is not strictly tied to grub.
#### How I did it
To implement this I introduce the following changes:
* Remove the different arch folders from the `installer/` directory
* Merge the generic components of the ARM and x86 installer into `installer/installer.sh`
* Refactor x86 + grub specific functions into `installer/default_platform.conf`
* Modify installer to call `default_platform.conf` file and also call `platform/[platform]/patform.conf` file as well to override as needed
* Update references to the installer in the `build_image.sh` script
* Add `TARGET_BOOTLOADER` variable that is by default `uboot` for ARM devices and `grub` for x86 unless overridden in `platform/[platform]/rules.mk`
* Update bootloader logic in `build_debian.sh` to be based on `TARGET_BOOTLOADER` instead of `TARGET_ARCH` and to reference the grub package in a generic manner
#### How to verify it
This has been tested on a ARM test platform as well as on Mellanox amd64 switches as well to ensure there was no impact.
#### Description for the changelog
[arm] Refactor installer and build to allow arm builds targeted at grub platforms
#### Link to config_db schema for YANG module changes
N/A
Why I did it
Storage backend has all vlan members tagged. If untagged packets are received on those links, they are accounted as RX_DROPS which can lead to false alarms in monitoring tools. Using this acl to hide these drops.
How I did it
Created a acl template which will be loaded during minigraph load for backend. This template will allow tagged vlan packets and dropped untagged
How to verify it
Unit tests
Signed-off-by: Neetha John <nejo@microsoft.com>
- Why I did it
Implemented sonic-net/SONiC#1001
- How I did it
Install systemd-bootchart tool and provide default config for it.
- How to verify it
Run build and verify systemd-bootchart is installed.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
New security feature for enforcing strong passwords when login or changing passwords of existing users into the switch.
- How I did it
By using mainly Linux package named pam-cracklib that support the enforcement of user passwords, the daemon named hostcfgd, will support add/modify password policies that enforce and strengthen the user passwords.
- How to verify it
Manually Verification-
1. Enable the feature, using the new sonic-cli command passw-hardening or manually add the password hardening table like shown in HLD by using redis-cli command
2. Change password policies manually like in step 1.
Notes:
password hardening CLI can be found in sonic-utilities repo-
P.R: Add support for Password Hardening sonic-utilities#2121
code config path: config/plugins/sonic-passwh_yang.py
code show path: show/plugins/sonic-passwh_yang.py
3. Create a new user (using adduser command) or modify an existing password by using passwd command in the terminal. And it will now request a strong password instead of default linux policies.
Automatic Verification - Unitest:
This PR contained unitest that cover:
1. test default init values of the feature in PAM files
2. test all the types of classes policies supported by the feature in PAM files
3. test aging policy configuration in PAM files
Signed-off-by: bingwang <wang.bing@microsoft.com>
Why I did it
This PR brings two changes
Add lossy PG profile for PG2 and PG6 on T1 for ports between T1 and T2.
After PR Update qos config to clear queues for bounced back traffic #10176 , the DSCP_TO_TC_MAP and TC_TO_PG_MAP is updated when remapping is enable
DSCP_TO_TC_MAP
Before After Why do this change
"2" : "1" "2" : "2" Only change for leaf router to map DSCP 2 to TC 2 as TC 2 will be used for lossless TC
"6" : "1" "6" : "6" Only change for leaf router to map DSCP 6 to TC 6 as TC 6 will be used for lossless TC
TC_TO_PRIORITY_GROUP_MAP
Before After Why do this change
"2" : "0" "2" : "2" Only change for leaf router to map TC 2 to PG 2 as PG 2 will be used for lossless PG
"6" : "0" "6" : "6" Only change for leaf router to map TC 6 to PG 6 as PG 6 will be used for lossless PG
So, we have two new lossy PGs (2 and 6) for the T2 facing ports on T1, and two new lossless PGs (2 and 6) for the T0 facing port on T1.
However, there is no lossy PG profile for the T2 facing ports on T1. The lossless PGs for ports between T1 and T0 have been handled by buffermgrd .Therefore, We need to add lossy PG profiles for T2 facing ports on T1.
We don't have this issue on T0 because PG 2 and PG 6 are lossless PGs, and there is no lossy traffic mapped to PG 2 and PG 6
Map port level TC7 to PG0
Before the PCBB change, DSCP48 -> TC 6 -> PG 0.
After the PCBB change, DSCP48 -> TC 7 -> PG 7
Actually, we can map TC7 to PG0 to save a lossy PG.
How I did it
Update the qos and buffer template.
How to verify it
Verified by UT.
Why I did it
Support to use symbol links in platform folder to reduce the image size.
The current solution is to copy each lazy installation targets (xxx.deb files) to each of the folders in the platform folder. The size will keep growing when more and more packages added in the platform folder. For cisco-8000 as an example, the size will be up to 2G, while most of them are duplicate packages in the platform folder.
How I did it
Create a new folder in platform/common, all the deb packages are copied to the folder, any other folders where use the packages are the symbol links to the common folder.
Why platform.tar?
We have implemented a patch for it, see #10775, but the problem is the the onie use really old unzip version, cannot support the symbol links.
The current solution is similar to the PR 10775, but make the platform folder into a tar package, which can be supported by onie. During the installation, the package.tar will be extracted to the original folder and removed.
Signed-off-by: bingwang <bingwang@microsoft.com>
Why I did it
This PR is to add two extra lossless queues for bounced back traffic.
HLD sonic-net/SONiC#950
SKUs include
Arista-7050CX3-32S-C32
Arista-7050CX3-32S-D48C8
Arista-7260CX3-D108C8
Arista-7260CX3-C64
Arista-7260CX3-Q64
How I did it
Update the buffers.json.j2 template and buffers_config.j2 template to generate new BUFFER_QUEUE table.
For T1 devices, queue 2 and queue 6 are set as lossless queues on T0 facing ports.
For T0 devices, queue 2 and queue 6 are set as lossless queues on T1 facing ports.
Queue 7 is added as a new lossy queue as DSCP 48 is mapped to TC 7, and then mapped into Queue 7
How to verify it
Verified by UT
Verified by coping the new template and generate buffer config with sonic-cfggen
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/Azure/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/Azure/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
Yang Model about password hardening feature, the sonic CLI of this feature was autogenerated from this Yang model
- How I did it
Create new Yang model in src/sonic-yang-models/yang-models/sonic-passwh.yang.
- How to verify it
There are unitests(yang test) in this P.R covering all the passwords policies with good and bad values cases.
Or is possible manually using the config/show password commands that were autogenerated from this Yang model. (this CLI code added in sonic-utilities)
This reverts commit 15cf9b0d70.
Why I did it
Revert the PR #10775, for it has impact on onie installation.
It is caused by the symbol links not supported in some of the onie unzip.
We will enable after fixing the issue, see #10914
What/Why I did:
Issue1: By setting up of ipvlan interface in interface-config.sh we are not tolerant to failures. Reason being interface-config.service is one-shot and do not have restart capability.
Scenario: For example if let's say database service goes in fail state then interface-services also gets failed because of dependency check but later database service gets restart but interface service will remain in stuck state and the ipvlan interface nevers get created.
Solution: Moved all the logic in database service from interface-config service which looks more align logically also since the namespace is created here and all the network setting (sysctl) are happening here.With this if database starts we recreate the interface.
Issue 2: Use of IPVLAN vs MACVLAN
Currently we are using ipvlan mode. However above failure scenario is not handle correctly by ipvlan mode. Once the ipvlan interface is created and ip address assign to it and if we restart interface-config or database (new PR) service Linux Kernel gives error "Error: Address already assigned to an ipvlan device." based on this:https://github.com/torvalds/linux/blob/master/drivers/net/ipvlan/ipvlan_main.c#L978Reason being if we do not do cleanup of ip address assignment (need to be unique for IPVLAN) it remains in Kernel Database and never goes to free pool even though namespace is deleted.
Solution: Considering this hard dependency of unique ip macvlan mode is better for us and since everything is managed by Linux Kernel and no dependency for on user configured IP address.
Issue3: Namespace database Service do not check reachability to Supervisor Redis Chassis Server.
Currently there is no explicit check as we never do Redis PING from namespace to Supervisor Redis Chassis Server. With this check it's possible we will start database and all other docker even though there is no connectivity and will hit the error/failure late in cycle
Solution: Added explicit PING from namespace that will check this reachability.
Issue 4:flushdb give exception when trying to accces Chassis Server DB over Unix Sokcet.
Solution: Handle gracefully via try..except and log the message.
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
Why I did it
The image size is too large, when there are multiple lazy packages and multiple platforms. It is not necessary to keep the lazy installation packages in multiple copies.
For cisco image, the image size will reduce from 3.5G to 1.7G.
How I did it
Use symbol links to only keep one package for each of the lazy package.
Make a new folder fsroot/platform/common
Copy the lazy packages into the folder.
When using a package in each of the platform, such as x86_64-grub, x86_64-8800_rp-r0, x86_64-8201_on-r0, etc, only make a symbol link to the package in the common folder.
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, PMON is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for PMON service.
Exclude for MLNX platform the start trigger of PMON when SYNCD starts in case of fastboot.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
- Why I did it
Profiling the system state on init after fast-reboot during create_switch function execution, it is possible to see few python scripts running at the same time.
This parallel execution consume CPU time and the duration of create_switch is longer than it should be.
Following this finding, and the motivation to ensure these services will not interfere in the future, LLDP is delayed in 90 seconds until the system finish the init flow after fastboot.
- How I did it
Add a timer for LLDP service.
Copy the timer file to the host bin image.
- How to verify it
Run fast-reboot on MLNX platform and observe faster create_switch execution time.
This PR is dependent on PR: #10567
Why I did it
Can not start sonic-hostservice
How I did it
Install python3-dbus and systemd-python, and replace invalid path
How to verify it
Start the service with below commands:
sudo systemctl start sonic-hostservice
sudo systemctl status sonic-hostservice
Signed-off-by: Gang Lv ganglv@microsoft.com
* Remove SSH host keys after installing the custom version of sshd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Use an override for for sshd instead of overwriting the service file
Don't overwrite upstream's .service file, and instead use an override
file for making sure the host key(s) are generated.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Why I did it
To support address sanitizer for Mellanox syncd
How I did it
/var/log/asan is mapped for syncd container (the same as for swss)
container stop() has a timeout (60s) for syncd (the same as for swss)
This is so libasan has enough time to generate a report.
added ASAN's log path to Mellanox syncd supervisord.conf
added "asan: yes" to sonic_version.yml
How to verify it
Added artificial memory leaks
Compiled with ENABLE_ASAN=y
Installed the image on DUT
Rebooted the DUT
Verified that /var/log/asan/syncd-asan.log contains the leaks
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
Why I did it
In the bringup of tomahawk4/trident4, we realized that such chips need a larger size of /dev/shm in syncd container, so we added the option --shm-size to the docker create for syncd. The default value for shm-size is 64m; after this change, people can add SYNCD_SHM_SIZE=128m to platform_env.conf to change it to 128m.
How to verify it
We verified that after this change, 1) on existing platforms without platform_env.conf, the size of /dev/shm in syncd container (df -h | grep shm) is still the default 64M; 2) after we add SYNCD_SHM_SIZE=128m to platform_env.conf, /dev/shm in syncd becomes 128M.
