Fixing issue FRRouting/frr#11108
For interface based peers with peer-groups, "no neighbor capability extended-nexthop" gets added by default. This will result in IPv4 routes not having ipv6 next hops.
- How I did it
Porting the commit FRRouting/frr@8e89adc to FRR 8.2.2 which fixes the issue
- How to verify it
Load FRR and verify if the "no neighbor capability extended-nexthop" not gets added for interfaces associated with peer-groups
- Why I did it
Update sonic-platform-common submodule pointer to include the following:
Read CMIS data path state duration (#312)
Remove shell=True (#313)
[credo][ycable] remove mux-toggle inprogress flags for some API's (#311)
[Cdb fw upgrade (#308)
[Credo][Ycable] enhancement and error exception for some APIs (#303)
[ycable] add definitions of some new API's for Y-Cable infrastructure (#301)
Install libyang to azure pipeline (#310)
Update the return of update_firmware for the image not exist case (#306)
[CMIS] 'get_transceiver_info' should return 'None' when CMIS cable EEPROM is not ready (#305)
uplift code coverage 80% (#307)
[sonic-pcie] Add UT for pcie_common.py (#293)
[CMIS] Catch Exception to avoid CMIS code crash (#299)
[Credo][Ycable] fix incorrect uart statistics (#296)
Add PSU input voltage and input current (#295)
- How I did it
Advance sonic-platform-common pointer
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
Update sonic-sairedis submodule pointer to include the following:
2585a1f [Support gearbox SAI_PORT_ATTR_PORT_SERDES_ID on vs (#1082)
fd9bc84 [SAI NAT aging notification (#987)
3fa8f34 [[doc]: Update README.md (#1122)
157e573 [[lgtm] Fix libyang missing in lgtm validation issue (#1135)
af80caa Add Voqs to Virtual Switch (#1061)
f9008ad [fastboot] fastboot enhancement: Use warm-boot infrastructure for fast-boot (#1100)
- How I did it
Advance sonic-sairedis pointer
Signed-off-by: dprital <drorp@nvidia.com>
Why I did it
Revert change in syslog such that it does not utilize c++ string
How I did it
Code change
How to verify it
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)
What I did
Filter port invalid MTU configuration
How I did it
Adjust the MTU value to the range of [68,9216]
How to verify it
Use "config interface mtu Ethernet1 40" command to configure the port MTU. The following error will occur in SWSS.
Why I did it
There is an outstanding FRR issue #12380. This seems to be a known issue but without good fix so far. The root cause is around zebra and kernel netlink interaction. The failure was previously not noticed by zebra.
How I did it
Port the patch that would make the issue obvious.
Signed-off-by: Ying Xie ying.xie@microsoft.com
changes:
-- yang model for dhcp_server table.
-- tests.
Why I did it
yang model for dhcp_server table.
How I did it
-- yang model for dhcp_server table.
-- yang model tests.
How to verify it
-- yang model build time tests.
changes:
-- yang model for mpls_tc_to_tc_map table.
-- tests.
#### Why I did it
yang model for mpls_tc_to_tc_map table.
#### How I did it
-- yang model for mpls_tc_to_tc_map table.
-- yang model tests.
#### How to verify it
-- yang model build time tests.
This is causing a build failure for all builds. The PR build was incorrectly marked as passing due to a different build issue.
libyang[0]: Regular expression "(/[a-zA-Z0-9_-.]+)*/([a-zA-Z0-9_-.]+)./[a-z]{3}" is not valid (".]+)*/([a-zA-Z0-9_-.]+)./[a-z]{3})$": range out of order in character class).
libyang[0]: Module "sonic-restapi" parsing failed.
ERROR:YANG-TEST: Exception >Module "sonic-restapi" parsing failed.< in /sonic/src/sonic-yang-models/tests/yang_model_tests/test_yang_model.py:114
ERROR:YANG-TEST: Exception >Module "sonic-restapi" parsing failed.< in /sonic/src/sonic-yang-models/tests/yang_model_test
This reverts commit e1765121b2.
- Why I did it
Fixes#11431
- How I did it
dhcp6relay binds to ipv6 addresses configured on these vlan interfaces
Thus check if they are ready before launching dhcp6relay
- How to verify it
Unit Tests
Tested on a live device
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Fix apt-get remove/purge version not locked issue when the apt-get options not specified.
How I did it
Add a space character before and after the command line parameters.
ac71d745d [VxLAN]Fix Vxlan delete command to throw error when there are references (#2404)
7419c6731 Added cisco config platform commands (#2242)
8760bbe80 Add UT to check sonic installer does not depend on database (#2401)
6bef65260 [doc] add documentation on automatic techsupport based on memory (#2411)
4a783745f [doc] update "config feature" section with "--block" option (#2409)
dd6210fcc [Vxlanmgrd] [CPA] Update the vxlan_tunnel name len to be under IFNAMIZ to overcome netdev creation failure (#2398)
bdc4a8a60 Fix broken pipeline build URL (#2363)
b31681b43 Fix display disorder problem of show vrf (#2392)
123504a85 YANG validation for ConfigDB Updates: portchannel add/remove, loopback interface, VLAN
28f6820c6 [link-local]Modify RIF check to include link-local enabled interfaces (#2394)
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
slb and bgp mon peers are not needed for storage backend. These neighbor are present in the minigraph.
How I did it
After minigraph parsing, remove these neighbors if it is a storage backend device
How to verify it
Unit tests
Verified on the device that once these tables are removed, these peers don't show up in "show runningconfig bgp" output
Include:
df92fb72 Improve verbosity level and provide more info in the log (#2472)
e81ed20b [intfmgr]: Enable `accept_untracked_na` kernel param (#2436)
24d29f18 [orchdaemon]: Fixed sairedis record file rotation (#2299)
b8ee07d7 [build] add missing package libyang-dev in lgtm.yml (#2475)
e46dd294 [crm] Fix issue with continues EXCEEDED and CLEAR logs for ACL group/table counters (#2463)
b61d24cd [doc]: Update README.md (#2456)
b9ade5d2 [orchagent] Fix issue: ip prefix shall be inited even if VRF/VNET is not ready (#2461)
f0f1eb47 Revert "[counters] Improve performance by polling only configured ports buffer queue/pg counters (#2360)" (#2458)
3d757a83 [ci][asan] add DVS tests run with ASAN (#2441)
04fbc8e3 [ci] Only when test stage succeeded or succeededwithissues, PR run Gcov (#2460)
7cc035f9 [orchagent]: Publish identified events via structured-events channel (#2446)
efa0f01d [QoS] Enforce drop probability only for colors whose WRED are enabled (#2422)
05c5c2f6 [swss] Replace memset functions (#2423)
9ff993db Modified the test file to remove click commands and do the REDIS-DB u… (#2264)
9e376af3 Install libyang in azure pipeline. (#2445)
c1eb99a7 check state_db for po before sending ARP/ND pkts (#2444)
43cc4869 [portmgr] Fixed the orchagent crash due to late arrival of notif (#2431)
b62c7162 Enhance orchagent and buffer manager in error handling (#2414)
13bda3c6 [Everflow/ERSPAN] Set correct destination port and mac address when the nexthop is updated for ERSPAN mirror destination (#2392)
0ccb315c Revert "[VS Test] Skip failing subport tests (#2370)" (#2421)
ac8a83f0 [UT] [Portsyncd] Added Unit Tests for portsyncd (#2297)
83a186a9 Change the log messages in addKernelNeigh/Route from ERROR to INFO (#2437)
9c23389b [BFD]Clean up state_db BFD entries on swss restart (#2434)
d41aebfd EntityBulker SIGSEGV when create_entry attr_count 0 (#2224)
f52a7b1c Fix the Fec Mode Setting of gbsyncd (#2430)
8cc0a451 [neighsyncd] Enabling ipv4 link local entries for non-dualtor (#2427)
5624e875 Revert "[ci][asan] add DVS tests run with ASAN (#2363)" (#2433)
a26b26ac Dynamic port configuration - add port buffer cfg to the port ref counter (#2194)
486939a9 tlm_teamd: Filter portchannel subinterface events from STATE_DB LAG_TABLE (#2408)
a4b89925 [counters] Improve performance by polling only configured ports buffer queue/pg counters (#2360)
4aaeec91 added support for Xsight platform (#2426)
ca9edcad [ci][asan] add DVS tests run with ASAN (#2363)
dec4570c Handle dual ToR neighbor miss scenario (#2151)
9eb44220 Upstream new development on p4orch (#2237)
e9be2c0e [lgtm] Fix dependency (#2419)
c0168f35 [muxorch] Returning true if nbr in skip_neighbor_ in isNeighborActive() (#2415)
cfcf3d87 [macsec]: Set MTU for MACsec (#2398)
8346034b Delete Invalid if condition in intfsorch.cpp (#2411)
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
0a7557bd9 [minigraph] add option to specify golden path in load_minigraph (#2350)
322aefc37 [GCU]Remove GCU unique lane check for duplicate lanes platforms (#2343)
7099fffa7 [fastboot] fastboot enhancement: Use warm-boot infrastructure for fast-boot (#2286)
09026edbb [warm-reboot] fix warm-reboot when /tmp/cache is missing (#2367)
a3c404c74 Fix typo in platform_sfputil_helper.is_rj45_port (#2374)
637d834ce Vnet_route_check Vxlan tunnel route update. (#2281)
29a3e5180 Added support for tunnel route status in show vnet routes all. (#2341)
1ac584bb3 Use 'default' VRF when VRF name is not provided (#2368)
4d377a620 [subinterface]Added additional checks in portchannel and subinterface commands (#2345)
bbcdf2ed7 disk_check: Publish event for RO state (#2320)
3fd537b0a Support the bandit check by GitHub Action (#2358)
491d3d380 [generate dump]Added error message when saisdkdump fails (#2356)
6830e01ec [counterpoll]Fixing counterpoll show for tunnel and acl stats (#2355)
3be2ad7de [fast-reboot]Avoid stopping masked services during fast-reboot (#2335)
0e1b0cf20 [GCU] Fix missing backend in dry run (#2347)
676c31bd0 Add verification for override (#2305)
48997c266 Add Password Hardening CLI support (#2338)
414e239ea update unit tests for swap allocator
a91a4922f consider swap checking memory in installer
f0ce58635 [route_check]: Ignore standalone tunnel routes (#2325)
Porting sonic_db_dump_load.py from sonic-py-swsssdk to sonic-py-common.
#### Why I did it
sonic-py-swsssdk will be deprecate, so porting sonic_db_dump_load.py to sonic-py-common.
#### How I did it
Copy sonic_db_dump_load.py to sonic-py-common, and fix minor API different.
#### How to verify it
Pass all E2E test.
The platform_tests/test_advanced_reboot.py::test_warm_reboot will cover this script.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Porting sonic_db_dump_load.py from sonic-py-swsssdk to sonic-py-common.
#### Ensure to add label/tag for the feature raised. example - [PR#2174](https://github.com/sonic-net/sonic-utilities/pull/2174) where, Generic Config and Update feature has been labelled as GCU.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: maipbui <maibui@microsoft.com>
#### Why I did it
`getstatusoutput()` function from `subprocess` module has shell injection issue because it includes `shell=True` in the implementation
Eliminate duplicate code
#### How I did it
Reimplement `getstatusoutput_noshell()` and `getstatusoutput_noshell_pipe()` functions with `shell=False`
Add `check_output_pipe()` function
#### How to verify it
Pass UT
- Why I did it
As part of Persistent log level HLD , LOGLEVEL_DB content is moved to CONFIG_DB.
In addition, it was decided to remove jinja2_cache which currently appear on LOGLEVEL_DB
This cache was added to speed up template rendering in start scripts. There were a lot of them rendered during system start. This caused a delay in warm boot LAG restore time. It was tested and verified that with and without the cache we don't see any difference in this timing now. It is probably due to a lot of other optimizations done to sonic-cfggen. Since there is no noticeable improvement made by j2 cache now it is safe to remove it.
- How I did it
Remove redis_bcc.py file and and remove the bytcode_cache from sonic-sfggen
- How to verify it
Warm boot was tested with \ without this jinja2_cache and it there is no difference in performance
Why I did it
Replace configuration parameter for gnmi write, and we will add other gnmi write features in the future.
How I did it
Update rules/config and other Makefile.
How to verify it
Build sonic image.
Why I did it
Current isc-dhcp uses below code to remove DHCP option:
memmove(sp, op, op[1] + 2);
sp += op[1] + 2;
sp points to the option to be stripped, we can call it as option S.
op points to the option after options S, we can call it as option O.
DHCP option is a typical type-length-value structure, the first byte is type, the second byte is length, and remain parts are value.
In this case, option O length is bigger than option S, and more than 2 bytes, after the memmove, we will get this result:
Now Option S and Option O are overwritten, op[1] was the length of Option O, and it's modified after memmove.
But current implementation is still using op[1] as length to update sp (sp+=op[1]+2), so we get the wrong sp.
How I did it
Create patch from https://github.com/isc-projects/dhcp
The new impelementation use mlen to store the length of Option O before memmove, that's how it fixed the bug.
size_t mlen = op[1] + 2;
memmove(sp, op, mlen);
sp += mlen;
How to verify it
I have a PR for sonic-mgmt to cover this issue:
sonic-net/sonic-mgmt#6330
Signed-off-by: Gang Lv ganglv@microsoft.com
* Make client indentity by AME cert
* Join k8s cluster by ipv6
* Change join test cases
* Test case bug fix
* Improve read node label func
* Configure kubelet and change test cases
* For kubernetes version 1.22.2
* Fix undefine issue
Signed-off-by: Yun Li <yunli1@microsoft.com>
Why I did it
Replace unsafe functions in iccpd
How I did it
Replace memset() by zero initialization
Replace strtok() by strtok_r()
Signed-off-by: maipbui <maibui@microsoft.com>
*The sonic-frr was upgraded to FRR 8.2.2 as part of PR #10691. However, sonic-frr/frr submodule was still referring to previous 7.5 version. Update the sonic-frr/frr submodule to 8.2.2 commit id. Fixes issue #11484.
Why I did it
This PR is to update TC_TO_QUEUE_MAP|AZURE for SKU Arista-7050CX3-32S-D48C8 and Arista-7260CX3 T0.
The change is only to align the TC_TO_QUEUE_MAP for regular traffic and bounced traffic. It has no impact on business because we have no traffic being mapped to TC2 or TC6.
How I did it
Update TC_TO_QUEUE_MAP|AZURE , and test cases as well.
How to verify it
Verified by running test case test_j2files.py
/sonic/src/sonic-config-engine$ python3 setup.py test -s tests/test_j2files.py
running test
......
----------------------------------------------------------------------
Ran 29 tests in 25.390s
OK
- Why I did it
Update sonic-platform-daemons submodule pointer to include the following:
[ycabled] enable telemetry for 'active-active'; fix gRPC portid ordering (#284)
[ycabled] remove some spurious logs (#282)
Correct the peer forwarding state table (#281)
add psu input voltage and current (#276)
[ycabled] add capability to enable/disable telemetry (#279)
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-utilities submodule pointer to include the following:
Replace cmp in acl_loader with operator.eq (#2328)
Subinterface vrf bind issue fix (#2211)
[VRF]Adding CLI checks to ensure Vrf is valid in interface bind and static route commands (#2333)
[doc]: Add MACsec CLI doc (#2334)
[sonic-package-manager] Drop 'expires_in' (#2002)
Handle non-front-panel ports in is_rj45_port (#2327)
[service_mgmt]: Fix fetch MULTI_INST_DEPENDENT bug in service_mgmt.sh.j2 (#2319)
correct an error by changing "show bgp summary" to "show bfd summary" (#2324)
Update VRF unbind command (#2331)
Fix issue: port_type is referenced before initialized (#2323)
Fix issue: exception in is_rj45_port in multi ASIC env (#2313)
Delete .DS_Store (#2244)
Fix bug with checking VRF's routes in route_check.py (#2301)
[decode-syseeprom] Fix setting use_db based on support_eeprom_db (#2270)
Fix vrf UT failed issue (#2309)
add lacp_rate to portchannel (#2036)
With this PR in, you flap BGP and use events_tool to see the published events.
With telemetry PR #111 in and corresponding submodule update done in buildimage, one could run gnmi_cli to capture BGP flap events.
Why I did it
Address issue #10970
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-mux-cable.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Pass sonic-config-engine unit test.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
f8fe41a023/src/sonic-yang-models/doc/Configuration.md (mux_cable)
Why I did it:
API get_device_runtime_metadata() added by #11795 uses merge operator for dict but that is supported only for python version >=3.9. This API will be be used by scrips eg:hostcfgd which is still build for buster which does not have python 3.9 support.
#### Why I did it
Structured events code like eventd, rsyslogplugin, requires changes made in swss-common
Submodule adds these newest commits:
56b0f18 (HEAD, origin/master, origin/HEAD, master) Events: APIs to set/get global options (#672)
5467c89 Add changes to yml file to improve pytest (#674)
#### How I did it
Updated git submodule
#### How to verify it
Check new commit pointer
2022-07-28 854d54e: Add support of mdio IPC server class using sai switch api and unix socket (sonic-net/sonic-sairedis#1080) (Jiahua Wang)
2022-07-27 513cb2a: [FlexCounter] Refactor FlexCounter class (sonic-net/sonic-sairedis#1073) (Junchao-Mellanox)
Why I did it
VoQ chassis supervisor will have Fabric asics and the sub_role for fabric asics will be "Fabric".
The fabric asics namespaces are not being returned in get_all_namespaces() and is required in caclmgrd to add right cacl to allow internal docker traffic from fabric asic namespaces.
test_cacl_application fails on VoQ chassis Supervisor with the error:
Failed: Missing expected iptables rules: set(['-A INPUT -s 240.127.1.1/32 -d 240.127.1.1/32 -j ACCEPT', '-A INPUT -s 240.127.1.3/32 -d 240.127.1.1/32 -j ACCEPT', '-A INPUT -s 240.127.1.2/32 -d 240.127.1.1/32 -j ACCEPT'])
How I did it
Update get_all_namespaces to return fabric namespaces list.
How to verify it
Verified on VoQ chassis.
Why I did it
Address issue #10966
sign-off: Jing Zhang zhangjing@microsoft.com
How I did it
Add sonic-peer-switch.yang and unit tests.
How to verify it
Compile Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl and target/python-wheels/sonic_yang_models-1.0-py3-none-any.whl.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
b721ff87b9/src/sonic-yang-models/doc/Configuration.md (peer-switch)
#### Why I did it
This fixed memory leak in ETHERLIKE-MIB. The fix is not part of net-snmp(5.7.3 version). This PR includes the patch to fix memory leak issue.
```
ke->name in stdup-ed at line 297: n->name = strdup(RTA_DATA(tb[IFLA_IFNAME]));
```
#### How I did it
patched the fix.
[net-snmp] upstream fix link -> [snmpd}upstream link](ed4e48b5fa)
#### How to verify it
**Before The fix**
used valgrind to find memory leak.
```
root@lnos-x1-a-csw06:/# grep "definitely lost" valgrind-out.txt
==493== 4 bytes in 1 blocks are definitely lost in loss record 1 of 333
==493== 16 bytes in 1 blocks are definitely lost in loss record 25 of 333
==493== 757 bytes in 71 blocks are definitely lost in loss record 214 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 293 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 294 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 295 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 296 of 333
==493== definitely lost: 905 bytes in 77 blocks
```
_we can see the memory leak see in stack trace._
-> dot3stats_linux -> get_nlmsg -> strdup
https://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.chttps://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.c#L277
```
n = malloc(sizeof(*n));
memset(n, 0, sizeof(*n));
n->ifindex = ifi->ifi_index;
n->name = strdup(RTA_DATA(tb[IFLA_IFNAME]));
memcpy(&n->stats, RTA_DATA(tb[IFLA_STATS]), sizeof(n->stats));
n->next = kern_db;
kern_db = n;
return 0;
```
we were not freeing space for EtherLike-MIB.AS interface mib queries were getting increased, we see memory increment.
```
kern_db = ke->next;
free(ke);
```
https://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.c#L467
```
==55== 757 bytes in 71 blocks are definitely lost in loss record 186 of 299
==55== at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==55== by 0x4EB6E49: strdup (strdup.c:42)
==55== by 0x493F278: get_nlmsg (dot3stats_linux.c:299)
==55== by 0x493F529: rtnl_dump_filter_l.constprop.3 (dot3stats_linux.c:370)
==55== by 0x493FD7A: rtnl_dump_filter (dot3stats_linux.c:401)
==55== by 0x493FD7A: _dot3Stats_netlink_get_errorcntrs (dot3stats_linux.c:424)
==55== by 0x494009F: interface_dot3stats_get_errorcounters (dot3stats_linux.c:530)
==55== by 0x48F6FDA: dot3StatsTable_container_load (dot3StatsTable_data_access.c:330)
==55== by 0x485E76B: _cache_load (cache_handler.c:700)
==55== by 0x485FA37: netsnmp_cache_helper_handler (cache_handler.c:638)
==55== by 0x48720BC: netsnmp_call_handler (agent_handler.c:526)
==55== by 0x48720BC: netsnmp_call_next_handler (agent_handler.c:640)
==55== by 0x4865F75: table_helper_handler (table.c:717)
==55== by 0x4871B66: netsnmp_call_handler (agent_handler.c:526)
==55== by 0x4871B66: netsnmp_call_handlers (agent_handler.c:611)
757 bytes in 71 blocks are definitely lost in loss record 214 of 333
==493== at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==493== by 0x4EB6E49: strdup (strdup.c:42)
==493== by 0x493F278: ??? (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x493F529: ??? (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x493FD7A: _dot3Stats_netlink_get_errorcntrs (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x494009F: interface_dot3stats_get_errorcounters (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x48F6FDA: dot3StatsTable_container_load (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x485E76B: _cache_load (cache_handler.c:700)
==493== by 0x485FA37: netsnmp_cache_helper_handler (cache_handler.c:638)
==493== by 0x48720BC: netsnmp_call_handler (agent_handler.c:526)
==493== by 0x48720BC: netsnmp_call_next_handler (agent_handler.c:640)
==493== by 0x4865F75: table_helper_handler (table.c:717)
==493== by 0x4871B66: netsnmp_call_handler (agent_handler.c:526)
==493== by 0x4871B66: netsnmp_call_handlers (agent_handler.c:611)
```
```
**After The fix**
no memory leak in valgrind stack trace related to etherlike MIB.
```
- Why I did it
Profiled the execution for the following cmd intfutil -c status
- How I did it
Cached the following information:
1. get_sonic_version_info()
2. get_platform_info()
None of the API exposed to the user libraries (for eg: sonic-utilities) has been modified
These methods involve reading text files or from redis. Thus, caching helped to improve the execution time
- How to verify it
Added UT's.
Verified on the device
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
Currently the CLI commands show interface status show interface counters and show interface description displays Ethernet-IB and Ethernet-Rec ports in the output. These are internal ports should only be displayed when the option -d all is used for the above mentioned CLI commands
How I did it
Add the port roles Inb and Rec when classifing a port as internal port.
How to verify it
Verify the CLI output of the command show interface status doesnt display the Ethenet-IB and Ethernet-Rec port when -d all option in not present
Before
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
On a supervisor card in a chassis, syncd/teamd/swss/lldp etc dockers are created for each Switch Fabric card. However, not all chassis would have all the switch fabric cards present. In this case, only dockers for Switch Fabrics present would be created.
The monit 'container_checker' fails in this scenario as it is expecting dockers for all Switch Fabrics (based on NUM_ASIC defined in asic.conf file).
* [snmpd]: Update to 5.9+dfsg-4+deb11u1 to match Debian version
This brings in some security fixes.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Update snmpd makefile
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Remove binNMU for snmpd
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [Bgpcfgd] Enhance add_peer/add_peer_ipv6 unit tests
Why I did it
The current input to add_peer/add_peer_ipv6 is admin status change, update the UT to supply new peer information.
Current UT does not check for case when check_neig_meta is true, update UT to check for this case
How I did it
By changing the input to add_peer/add_peer_ipv6
By modifying load_constants/constructor to take constants path as an input, and add two UT that uses a version of constants.yml that sets check_neig_meta to true.
How to verify it
UT failing before the change, and passing after the change.
Signed-off-by: maipbui <maibui@microsoft.com>
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
Replace unsafe functions to safe functions
#### How I did it
Replace `strtok()` by `strtok_r()`
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Fix#10549Fix#10550
#### Why I did it
Create sonic yang model for SNMP
Tables:SNMP, SNMP_COMMUNITY
#### How I did it
Defined yang models based for SNMP based on snmp.yml
#### How to verify it
Added test cases to verify
Why I did it
This PR is to update Yang model for pfc_enable and pfcwd_sw_enable fields to support more than 2 queues, like 2,3,4,6.
Before this change, the regex "[0-7](,[0-7])?" accepts only no more than 2 queues.
How I did it
Update the regex pattern for pfc_enable and pfcwd_sw_enable, from "[0-7](,[0-7])?" to "[0-7](,[0-7])*
How to verify it
The change is verified by UT. The test input is updated to cover the change.
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py .
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Advance saibcm-modules-dnx
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Generate the port configuration required 400G ZR port from minigraph.
How I did it
Add parse logic to get tx_power and laser_freq from LinkMetadata section of the minigraph.
Add UT for packet-chassis and voq chassis
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
Update sonic-swss-common submodule to include events API that will be used to stream structured events
Contains only:
ecc13b2 2022-08-10 | APIs to support streaming structured events (https://github.com/sonic-net/sonic-buildimage/pull/667) [Zain Budhwani]
How I did it
Pull from latest commit in sonic-swss-common
How to verify it
Look at pointer for sonic-swss-common
Why I did it
2 things are missing in current allow-prefix list implementation.
In some usecase, need to tell the BGP neighbor and have different allow-prefix list for different neighbors, which is not supported.
for the prefix list, can't support flexible le and ge.
How I did it
To enhance the bgp allow-prefix list feature to have:
To include the neighbor type info for the allow-prefix list.
To support flexible le and ge length for allow-prefix list.
How to verify it
4 new unit test cases are added in this PR to cover changes.
* Advance sonic-utilities pointer
7919077f Add FEC correctable and uncorrectable port stats (#2027)
ecb91367 Add CLI to configure YANG config validation (#2147)
e9ab5235 Add override testcase to verify removal (#2288)
c6794b55 Fix version in db_migrator for `PORT_QOS_MAP|global` (#2289)
92b889b7 [intfutil] Check whether the FEC mode is supported on the platform before configuring it to CONFIG_DB (#2223)
dab0d065 Transfer organization from Azure to sonic-net (#2284)
6de18a1d [watermarkstat] Fix CLI script for unconfigured PG counters (#2239)
ac2f5530 Improve the way to check port type of RJ45 port (#2249)
142185c9 Fix the issue that sonic_platform is not installed on vs image (#2300)
ca14133f [crm] add checking for CRM interval range (#2293)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Advance swss
dc8bc1c4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)
6565b502 Revert "[portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)" (#2396)
dc88d55d Revert hwinfo count change (#2383)
75fc9659 [DualToR] Handle race condition between tunnel_decap and mux orchestrator (#2397)
525a57fa Fix for remote system interface not getting created (#2364)
3161eaae portsorch: initial support for link-training (#2359)
dc477fb0 [swss/cfgmgr] teammgr configure lacp rate (#2121)
2489ad57 Improve pytest speend by grouping 20 tests together. (#2390)
168bd3b3 [EVPN]Modified tunnel creation logic when creating tunnel in VRF-VNI map creation flow (#2404)
1e1438e4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2400)
9f2e27b4 [QoS] Fix issue: the WRED profile can not be set if current min > new max or current max < new min (#2379)
d36c17d6 [asan][aclorch] fix a memory leak in the SaiAttrWrapper::swap() (#2382)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* More sonic-utilities PRs
be1866fd Fix GCU bug when backend service modifying config (#2295)
bcf36eb3 Fix issues for sonic_installer upgrade-docker and sonic_installer rollback-docker (#2278)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Update sonic-platform-daemons submodule pointer to include the following:
Xcvrd changes to support 400G ZR configuration (#270)
[ycabled] add secure channel support for grpc dualtor active-active connectivity (#275)
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-swss-common submodule pointer to include the following:
Add docker-mux related table names (#627)
Transfer organization from Azure to sonic-net (#656)
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-platform-common submodule pointer to include the following:
[eeprom] Add UT for eeprom_tlvinfo.py (#292)
Fix Cmis memmap field offset (#290)
Fix AttributeError for "sfputil show error-status -hw" (#291)
Why I did it
Fix CVE-2017-1000487 alert in thrift 0.14.1.
See https://nvd.nist.gov/vuln/detail/CVE-2017-1000487
How I did it
Change the version of org.codehaus.plexus:plexus-utils from 3.0.14 to 3.0.16.
24f505148 [eloop.c]: Increase timeout of signal termination (#62)
2b2c1ad72 [driver_macsec_sonic.c]: Fixbug: a wrong db_wait in delete sa (#61)
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
Update bgpmon.py from py-swsssdk to swsscommon
#### How I did it
Change bgpmon.py to use swsscommon.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update bgpmon.py from py-swsssdk to swsscommon
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
#### Why I did it
Submodule update for sonic-swss-common with following change:
```
2247dbe 2022-08-01 | Fix memory leak issue in ConfigDBConnector. (#655) [Hua Liu]
4af97d6 2022-07-27 | Add new table schemas for DASH (#654) [prabhataravind]
d72e5ea 2022-07-23 | Fix epoll and socket resource leak issue. (#651) [Hua Liu]
dda857b 2022-07-21 | Microsoft mandatory file (#620) [microsoft-github-policy-service[bot]]
4132d14 2022-07-21 | Fix PING database command not backward compatible with python version issue. (#650) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-swss-common with following change:
```
2247dbe 2022-08-01 | Fix memory leak issue in ConfigDBConnector. (#655) [Hua Liu]
4af97d6 2022-07-27 | Add new table schemas for DASH (#654) [prabhataravind]
d72e5ea 2022-07-23 | Fix epoll and socket resource leak issue. (#651) [Hua Liu]
dda857b 2022-07-21 | Microsoft mandatory file (#620) [microsoft-github-policy-service[bot]]
4132d14 2022-07-21 | Fix PING database command not backward compatible with python version issue. (#650) [Hua Liu]
```
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
#### Why I did it
To support Yang models for SRV6 CM
#### How I did it
Added yang models for SRV6 MY_SID_ENTRY and Nexthop
#### How to verify it
Added SRV6 CRM yang tests.
#### Which release branch to backport (provide reason below if selected)
202111
#### Why I did it
Submodule update for sonic-dbsyncd with following change:
```
0d67faf 2022-07-28 | Replace pyswsssdk with sonic-py-common (#45) [Hua Liu]
265c833 2022-01-11 | Updated the Azure pipeline for Code Coverage (#44) [abdosi]
6548116 2021-04-04 | [ci]: add proper azp [Guohan Lu]
43b9dab 2021-04-04 | [pytest]: add pytest.ini [Guohan Lu]
```
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-dbsyncd with following change:
```
0d67faf 2022-07-28 | Replace pyswsssdk with sonic-py-common (#45) [Hua Liu]
265c833 2022-01-11 | Updated the Azure pipeline for Code Coverage (#44) [abdosi]
6548116 2021-04-04 | [ci]: add proper azp [Guohan Lu]
43b9dab 2021-04-04 | [pytest]: add pytest.ini [Guohan Lu]
```
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
Why I did it
The bgpcfgd doesn't support deletion of 'zebra set src', if an interface is deleted, the bgpcfgd will drop a warning message. In current implementation, we only care about the loopback0 interface but not others.
To improve the log print to have the key info, which will give the name of the deleted interface. We can ignore it if it is not the loopback0 interface. The application layer should be aware of that update and deletion is not supported, delete or update with a new address of loopback0 could cause issue, this log can give enough info to root cause the issue.
How I did it
How to verify it
Upgrade submodule sairedis to take the fix for saithrift build
Upgrade SAI to latest for building in bullseye (#1093)
involve other changes in sairedis:
[sairedis] Fix reopen recoding file (#1087)
Update PN with XPN support (#1081)
[syncd] Remove error message when tryTranslateVidToRid fails (#1048)
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
feeac84 [counters] Keep counters cache in a single directory (#2232)
cd7909e Updated the CLI file for Radius and Linux kernel commands (#2276)
cd6898b Update db_migrator to support `PORT_QOS_MAP|global` (#2205)
8f4fc62 Revert "Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)" (#2184)
27667cf Fix test for pfcwd_sw_enable in db_migrator_test (#2253)
e1866e3 [MultiAsic] sudo reboot command doesn't gracefully stop Asic syncd# on multiasic platform (#2258)
9e3ba82 Change db_migrator major version on master branch from version 2 to 3 (#2272)
65346ce Microsoft mandatory file (#2177)
308e25f portconfig option to configure Tx power and laser frequency of ZR transceiver module (#2197)
e49b1e8 [vnet_route_check] Align DB data parse logic with format used by swsscommon API (#2268)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
This PR is to backport PR #11056 and PR #11045 into master branch.
This PR is to enable tunnel_qos_remap on T1 and T0 in DualToR deployment.
On T1, we check the property DownstreamRedundancyTypes. On T0, we check the property RedundancyType.
tunnel_qos_remap is set to enabled if gemini is in DownstreamRedundancyTypes (on T1) or RedundancyType (on T0).
How I did it
The change is implemented in minigraph.py.
How to verify it
Verified by test_minigraph_case.py and 'test_j2files.py`.
sonic-platform-daemon submodule update
005ec30 [ycabled] remove some redundant logging for active-active cable type (#274)
e889625 [ycabled][grpc] Fix some time interval,options for grpc keep alive to work (#271)
1651050 [ycabled] add some retry logic for gRPC channel setup;fix no channel gRPC notification (#269)
7c0be24 [CMIS]Improved 400G link bring up sequence (#254)
df447b4 [ycabled] Fix the init values for active-active ports (#266)
ec84af4 [sonic-ycabled] fix grpc logic for timeout,cli HWSTATUS value retrival logic for active-active cable (#264)
Co-authored-by: Jaganathan Anbalagan <jaganbal@cisco.com>
Updating swss submodule with below commits
4a6f940 [EVPN]Fix missing Vlan member update notification in P2MP scenario
e9984d8 Enable p4orch unit test for test workflow. (#2375)
33c420d [Buffer Orch] Support removing buffer port profile list (#2371)
419ab1b [macsecmgr]: Fix cleanup macsec objs if container stop (#2376)
Why I did it
ip command cannot update packet number if the cipher is XPN.
How I did it
Specify SSCI when update packet number and ignore SSCI value if update action.
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
- Why I did it
To implement Syslog Source IP feature
In order to include the following commit: 8e5d478 [ssip]: Add CLI (#2191)
- How I did it
Updated syslog config template
Advanced submodule sonic-utilities
ea11b22 [sonic-bootchart] add sonic-bootchart (#2195)
8e5d478 [ssip]: Add CLI (#2191)
1dacb7f Replace pyswsssdk with swsscommon (#2251)
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
- Why I did it
Support Mellanox-SN4600C-C64 as T1 switch in dual-ToR scenario
This is to port #11032 and #11299 from 202012 to master.
Support additional queue and PG in buffer templates, including both traditional and dynamic model
Support mapping DSCP 2/6 to lossless traffic in the QoS template.
Add macros to generate additional lossless PG in the dynamic model
Adjust the order in which the generic/dedicated (with additional lossless queues) macros are checked and called to generate buffer tables in common template buffers_config.j2
Buffer tables are rendered via using macros.
Both generic and dedicated macros are defined on our platform. Currently, the generic one is called as long as it is defined, which causes the generic one always being called on our platform. To avoid it, the dedicated macrio is checked and called first and then the generic ones.
Support MAP_PFC_PRIORITY_TO_PRIORITY_GROUP on ports with additional lossless queues.
On Mellanox-SN4600C-C64, buffer configuration for t1 is calculated as:
40 * 100G downlink ports with 4 lossless PGs/queues, 1 lossy PG, and 3 lossy queues
16 * 100G uplink ports with 2 lossless PGs/queues, 1 lossy PG, and 5 lossy queues
Signed-off-by: Stephen Sun <stephens@nvidia.com>
#### Why I did it
Submodule update for sonic-swss-common with following change:
597b022 Add SonicDBConfig.getInstanceList() API (#639)
7073dc6 add table name for vlan_stacking (#646)
7e39f31 Add SonicV2Connector::set method for int value. (#648)
154cc9c Improve hset and hdel performance with RedisPipeline. (#647)
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-swss-common with following change:
597b022 Add SonicDBConfig.getInstanceList() API (#639)
7073dc6 add table name for vlan_stacking (#646)
7e39f31 Add SonicV2Connector::set method for int value. (#648)
154cc9c Improve hset and hdel performance with RedisPipeline. (#647)
#### A picture of a cute animal (not mandatory but encouraged)
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Improve throughput and latency for 7260 deployments
How I did it
Update the dynamic threshold to 0 and ECN settings as 2mb/10mb/5%
How to verify it
Updated unit tests to use the modified values for 7260 ecn settings.
What I did:
Added Support for deployment_id parsing for Device Asic metadata.
Why I did:-
Deployment Id is used in BGP docker for FRR template generation. For multi-asic platforms running in namespace without deployment id as key in DEVICE_METADATA FRR template generation fails. This change is needed after this #10154 where if deployment_id is none we don't update DEVICE_METADA dictionary.
How I verify:-
Added unit-test.
Why I did it
This PR is to add a flag to control whether to generate PORT_QOS_MAP|global entry or not.
It's because for some HWSKU, such as BackEndToRRouter and BackEndLeafRouter, there is no DSCP_TO_TC_MAP defined.
Hence, if the PORT_QOS_MAP|global entry is generated, OA will report some error because the DSCP_TO_TC_MAP map AZURE can not be found.
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- saiObjectTypeQuery: invalid object id oid:0x7fddb43605d0
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- meta_generic_validation_objlist: SAI_SWITCH_ATTR_QOS_DSCP_TO_TC_MAP:SAI_ATTR_VALUE_TYPE_OBJECT_ID object on list [0] oid 0x7fddb43605d0 is not valid, returned null object id
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- applyDscpToTcMapToSwitch: Failed to apply DSCP_TO_TC QoS map to switch rv:-5
Jul 14 00:24:40.286767 str2-7050qx-32s-acs-03 ERR swss#orchagent: :- doTask: Failed to process QOS task, drop it
This PR is to address the issue.
How I did it
Add a flag require_global_dscp_to_tc_map to control whether to generate the PORT_QOS_MAP|global entry. The default value for require_global_dscp_to_tc_map is true. If the device type is storage backend, the value is changed to false. Then the PORT_QOS_MAP|global entry is not generated.
How to verify it
Update the current test_qos_dscp_remapping_render_template to cover storage backend.
Why I did it
Enable UT code coverage in sonic-buildimage repo submodule and enable LGTM
How I did it
create separate repo for sonic-host-services in sonic-net, and update submodule for sonic-buildimage
How to verify it
Build image
- Why I did it
To implement Syslog Source IP feature
- How I did it
Added the relevant yang doc
- How to verify it
N/A
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Updating sonic-utilities submodule with the following commits
d6b8869 [Auto-Techsupport] Fix the coredump_gen_handler Exception when the History table is empty
b41da8f Fix README to reflect sonic-utilities being built in Bullseye
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There is a need to select different mmu profiles based on deployment type
How I did it
There will be separate subfolders (RDMA-CENTRIC, TCP-CENTRIC, BALANCED) in each hwsku folder which contains deployment specific mmu and qos settings. SonicQosProfile attribute in the minigraph will be used to determine which settings to use. If that attribute is not present, the default settings that exist in the hwsku folder will be used
Why I did it
Add infrastructure to support adding feature specific acls.
If feature specific ACLs has to be added:
if feature_name in self.feature_present and self.feature_present.get('feature_name'):
add_feature_specific_acls()
How I did it
Add function to get features present in feature table.
How to verify it
unit-test passes.
Why I did it
Currently interfaces.j2 hardcodes to eth0 even when there are multiple interfaces in MGMT_INTERFACE. This change adds support to generate /e/n/i when there are multiple interfaces in MGMT_INTERFACE.
How I did it
By removing hardcoded eth0 when looping through MGMT_INTERFACE.
How to verify it
Verified through unit test.
Which release branch to backport (provide reason below if selected)
201811
201911
202006
202012
202106
202111
202205
Description for the changelog
Link to config_db schema for YANG module changes
A picture of a cute animal (not mandatory but encouraged)
Why I did it
src/dhcprelay is being split out to be its own submodule.
How I did it
Add existing dhcprelay commits into the new repo.
Clean up Makefile (sonic-net/sonic-dhcp-relay@772625f)
Add LGTM config (sonic-net/sonic-dhcp-relay@5cc0889)
Add Azure pipeline config (sonic-net/sonic-dhcp-relay@c79cdb7)
Add submodule reference, renaming most references of dhcp6relay to dhcprelay (to reflect that this will not just be for IPv6 in the future).
How to verify it
Successful run of LGTM is tested at sonic-net/sonic-dhcp-relay#4. Failure run of LGTM is tested at sonic-net/sonic-dhcp-relay#3.
Azure pipeline is run for each commit/PR, and will build for amd64, armhf, and arm64. UT/code coverage check is not yet done.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
[master][sonic-linkmgrd] submodule update
58d8aae Longxiang Lyu Sat Jul 2 10:14:50 2022 +0800 Enforce switch after config mux to active (Azure/sonic-linkmgrd#95)
600df46 Longxiang Lyu Thu Jun 30 15:09:10 2022 +0800 Add unittest to verify mux toggle active (Azure/sonic-linkmgrd#94)
400b1b8 gregshpit Wed Jun 29 21:32:45 2022 +0300 For Sonic cross-compilation build. CC variable is used as gcc compiler. CXX variable is used as g++ compiler. (Azure/sonic-linkmgrd#91)
a516668 Jing Zhang Tue Jun 28 11:07:23 2022 -0700 Use Vlan MAC as src MAC for link prober by default (Azure/sonic-linkmgrd#93)
6b5d739 Longxiang Lyu Tue Jun 28 22:46:12 2022 +0800 Fix inconsistent mux state (Azure/sonic-linkmgrd#92)
9265497 Jing Zhang Fri Jun 24 09:10:12 2022 -0700 Remove exception throwing when initializing missing loopback interface (Azure/sonic-linkmgrd#90)
sign-off: Jing Zhang zhangjing@microsoft.com
#### Why I did it
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### How I did it
Change code to use swsscommon.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update scripts in sonic-buildimage from py-swsssdk to swsscommon
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Updating sonic-utilities sub module with the following commits
cc847a2 Change diff coverage threshold to 80%
ca785a2 Remove sonic-db-cli
#### Why I did it
To fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/Azure/sonic-buildimage/issues/10218
sonic-db-cli re-write with c++ and move to sonic-swss-common repo.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
cc847a2 Change diff coverage threshold to 80%
ca785a2 Remove sonic-db-cli
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
Why I did it
Database container takes long time ( more than 1.5 minutes ) on some vendor platforms.
This makes the determine-reboot-cause starts later than process-reboot-cause service.
And that results in the incorrect reboot-cause determination.
How I did it
Add the dependency of determine-reboot-cause service to process-reboot-cause service
* [device]: Add SAI checksum verify to TD3 config
* A new config option was added to control the value of IPV4_INCR_CHECKSUM_ORIGINAL_VALUE_VERIFY in the EGR_FLEX_CONFIG control register (this prevents checksums of 0xffff from being propagated to other devices)
Why I did it
SONiC Yang support for VXLAN
How I did it
Added a new sonic-vxlan.yang file.
Please refer to EVPN VXLAN HLD for DB details
https://github.com/Azure/SONiC/tree/master/doc/vxlan/EVPN
How to verify it
Added tests for sonic vxlan yang.
Why I did it
Daemon dhcp6relay may crash due to null pointer access to ifa_addr member of struct ifaddrs. It's not guaranteed that the interface must have available ifa_addr. That is true for some special virtual/pseudo interfaces.
How I did it
Check the pointer to ifa_addr is valid ahead of accessing it.
Why I did it
Fix the missing debian package for reproducible build issue.
The gnupg2 should be added into the version file.
https://dev.azure.com/mssonic/build/_build/results?buildId=118139&view=logs&j=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&t=8d99be27-49d0-54d0-99b1-cfc0d47f0318
The following packages have unmet dependencies:
gnupg2 : Depends: gnupg (>= 2.2.27-2+deb11u2) but 2.2.27-2+deb11u1 is to be installed
E: Unable to correct problems, you have held broken packages.
The issue was caused by the gnupg2 removed, and not detected.
sonic-buildimage/build_debian.sh
Line 250 in 4fb6cf0
sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y remove software-properties-common gnupg2 python3-gi
How I did it
Export the debian packages when any debian package being removed.
#### Why I did it
To deprecate sonic-py-swsssdk, need move some code to sonic-py-common.
#### How I did it
Porting util.py and port_util.py from sonic-py-swsssdk to sonic-py-common.
#### How to verify it
Pass UT.
Pass all E2E test.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Porting util.py and port_util.py from sonic-py-swsssdk to sonic-py-common.
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
For storage backend, certain rules will be applied to the DATAACL table to allow only vlan tagged packets and drop untagged packets.
How I did it
Create DATAACL table if the device is a storage backend device
To avoid ACL resource issues, remove EVERFLOW related tables if the device is a storage backend device
How to verify it
Added the following unit tests
- verify that EVERFLOW acl tables is removed and DATAACL table is added for storage backend tor
- verify that no DATAACL tables are created and EVERFLOW tables exist for storage backend leaf
Update sonic-utilities submodule to include below commits:
7070794 Fix DBConfig not initialize issue in pfcwd (#2238)
b5d6659 [config/load_mgmt_config] Support load IPv6 mgmt IP (#2206)
3274b0e Added bf_drivers.log to zipped dump after execution of "show techsupport" (#2164)
8dee36c [portstat] Update portstat to use CounterTable API (#2207)
7d9faf3 Added support for Sonic cross-compilation build. (#2233)
c3620fc [GCU] Moving UniqueLanes from only validating moves, to be a supplemental YANG validator (#2234)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
Why I did it
Storage backend has all vlan members tagged. If untagged packets are received on those links, they are accounted as RX_DROPS which can lead to false alarms in monitoring tools. Using this acl to hide these drops.
How I did it
Created a acl template which will be loaded during minigraph load for backend. This template will allow tagged vlan packets and dropped untagged
How to verify it
Unit tests
Signed-off-by: Neetha John <nejo@microsoft.com>
10cd834 [select] break the select loop if interrupt_on_signal flag is set (#624)
d0cd8a0 Fix: missing sonic-db-cli in docker-sonic-vs image (#640)
567f0df Change diff coverage threshold to 80% (#630)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
To further support parse out soc_ipv4 and soc_ipv6 out of Dpg:
<DeviceDataPlaneInfo>
<IPSecTunnels />
<LoopbackIPInterfaces xmlns:a="http://schemas.datacontract.org/2004/07/Microsoft.Search.Autopilot.Evolution">
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>HostIP</Name>
<AttachTo>Loopback0</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>10.10.10.2/32</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>10.10.10.2/32</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>HostIP1</Name>
<AttachTo>Loopback0</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>fe80::0002/128</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>fe80::0002/128</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>SoCHostIP0</Name>
<AttachTo>server2SOC</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>10.10.10.3/32</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>10.10.10.3/32</a:PrefixStr>
</a:LoopbackIPInterface>
<a:LoopbackIPInterface>
<ElementType>LoopbackInterface</ElementType>
<Name>SoCHostIP1</Name>
<AttachTo>server2SOC</AttachTo>
<a:Prefix xmlns:b="Microsoft.Search.Autopilot.NetMux">
<b:IPPrefix>fe80::0003/128</b:IPPrefix>
</a:Prefix>
<a:PrefixStr>fe80::0003/128</a:PrefixStr>
</a:LoopbackIPInterface>
</LoopbackIPInterfaces>
</DeviceDataPlaneInfo>
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
For servers loopback definitions in Dpg, if they contain LoopbackIPInterface with tags AttachTo, which has value of format like <server_name>SOC, the address will be regarded as a SoC IP, and sonic-cfggen now will treat the port connected to the server as active-active if the redundancy_type is either Libra or Mixed.
How to verify it
Pass the unittest.
Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
#### Why I did it
Added a tool to generate configuration based on yang model
#### How I did it
Parse the yang model and create documentation based on description field.
#### How to verify it
Added UT to verify it.
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
The tests that are available for interfaces.j2 only covers the case when ZTP is disabled and MGMT_INTERFACE is defined. This change adds unit tests for:
1) When ZTP is enabled, with combination of (ip enabled/disabled, inband enabled/disabled)
2) When ZTP is disabled, and MGMT_INTERFACE is not defined, with mgmtVrfEnabled set to true/false
#### How I did it
I created multiple mock-up files to:
1) Enable/disable ZTP, and subconditions under ZTP
2) Created graph file that has no management interface defined
#### How to verify it
Compared output with interfaces.j2 template to ensure the output is expected.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
To address https://github.com/Azure/sonic-buildimage/issues/11110 - Add yang model unit test for check_up_status field type
#### How I did it
Add check_up_status with different values in sample_config_db.json and
the field with correct and incorrect values in feature.json
#### How to verify it
Build sonic_yang_models-1.0-py3-none-any.whl
#### Why I did it
Revert PR '[Submodule] Update src/sonic-py-swsssdk #10996' which break UT in sonic-swss and sonic-swss-common
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Revert PR '[Submodule] Update src/sonic-py-swsssdk #10996'
#### Link to config_db schema for YANG module changes
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
New security feature for enforcing strong passwords when login or changing passwords of existing users into the switch.
- How I did it
By using mainly Linux package named pam-cracklib that support the enforcement of user passwords, the daemon named hostcfgd, will support add/modify password policies that enforce and strengthen the user passwords.
- How to verify it
Manually Verification-
1. Enable the feature, using the new sonic-cli command passw-hardening or manually add the password hardening table like shown in HLD by using redis-cli command
2. Change password policies manually like in step 1.
Notes:
password hardening CLI can be found in sonic-utilities repo-
P.R: Add support for Password Hardening sonic-utilities#2121
code config path: config/plugins/sonic-passwh_yang.py
code show path: show/plugins/sonic-passwh_yang.py
3. Create a new user (using adduser command) or modify an existing password by using passwd command in the terminal. And it will now request a strong password instead of default linux policies.
Automatic Verification - Unitest:
This PR contained unitest that cover:
1. test default init values of the feature in PAM files
2. test all the types of classes policies supported by the feature in PAM files
3. test aging policy configuration in PAM files
Signed-off-by: bingwang <wang.bing@microsoft.com>
Why I did it
This PR brings two changes
Add lossy PG profile for PG2 and PG6 on T1 for ports between T1 and T2.
After PR Update qos config to clear queues for bounced back traffic #10176 , the DSCP_TO_TC_MAP and TC_TO_PG_MAP is updated when remapping is enable
DSCP_TO_TC_MAP
Before After Why do this change
"2" : "1" "2" : "2" Only change for leaf router to map DSCP 2 to TC 2 as TC 2 will be used for lossless TC
"6" : "1" "6" : "6" Only change for leaf router to map DSCP 6 to TC 6 as TC 6 will be used for lossless TC
TC_TO_PRIORITY_GROUP_MAP
Before After Why do this change
"2" : "0" "2" : "2" Only change for leaf router to map TC 2 to PG 2 as PG 2 will be used for lossless PG
"6" : "0" "6" : "6" Only change for leaf router to map TC 6 to PG 6 as PG 6 will be used for lossless PG
So, we have two new lossy PGs (2 and 6) for the T2 facing ports on T1, and two new lossless PGs (2 and 6) for the T0 facing port on T1.
However, there is no lossy PG profile for the T2 facing ports on T1. The lossless PGs for ports between T1 and T0 have been handled by buffermgrd .Therefore, We need to add lossy PG profiles for T2 facing ports on T1.
We don't have this issue on T0 because PG 2 and PG 6 are lossless PGs, and there is no lossy traffic mapped to PG 2 and PG 6
Map port level TC7 to PG0
Before the PCBB change, DSCP48 -> TC 6 -> PG 0.
After the PCBB change, DSCP48 -> TC 7 -> PG 7
Actually, we can map TC7 to PG0 to save a lossy PG.
How I did it
Update the qos and buffer template.
How to verify it
Verified by UT.
- Why I did it
While doing config reload, FEATURE table may be removed and re-add. During this process, updating FEATURE table is not atomic. It could be that the FEATURE table has entry, but each entry has no field. This PR introduces a retry mechanism to avoid this.
- How I did it
Introduces a retry mechanism to avoid this.
- How to verify it
New unit test added to verify the flow as well as running some manual test.
2022-06-24 93af69c: [PFC_WD] Avoid applying ZeroBuffer Profiles to ingress PG when a PFC storm is detected (Azure/sonic-swss#2304)
2022-06-24 37349cf: [swssconfig] Optimize performance of swssconfig (Azure/sonic-swss#2336)
2022-06-24 84e9b07: [fdborch] fix heap-use-after-free in clearFdbEntry() (Azure/sonic-swss#2353)
2022-06-24 1b8bd94: Create ACL table fails due to incorrect check for supported ACL actions #11235 (Azure/sonic-swss#2351)
2022-06-24 1ed0b4b: [macsec] Refactor the logic of macsec name map (Azure/sonic-swss#2348)
2022-06-23 f88f992: [mock_tests] Add Sflow Orch UTs (Azure/sonic-swss#2295)
2022-06-23 ec57bf1: [macsec] Update macsec flex counter (Azure/sonic-swss#2338)
2022-06-22 6e0fc85: [ACL] Support stage particular match fields (Azure/sonic-swss#2341)
2022-06-22 efb4530: [orchagent, DTel]: report session support to set user vrf (Azure/sonic-swss#2326)
2022-06-22 d82874d: Fix for "orchagent crashed when trying to delete fdb static entry with swssconfig #11046" (Azure/sonic-swss#2332)
2022-06-22 0c789e6: Fix qos map test in vs test (Azure/sonic-swss#2343)
2022-06-17 1bb5070: Enhance mock test for dynamic buffer manager for port removing and qos reload flows (Azure/sonic-swss#2262)
2022-06-16 700492f: [aclorch] Fix and simplify DTel watchlist tables and entries (Azure/sonic-swss#2155)
Updating sonic-utilities submodule with the below commits
f64d280 [sfpshow/sfputil] Enhance sfpshow and sfputil to behavior correctly on RJ45 ports
2f6a547 Image-installer: Fix duplication of image prefix
cc775ab [generate dump] Move the Core/Log collection to the End of process Execution and removed default timeout
6dbb4bd Add an option in queue stat to display voq counters
248ddd5 Gives cisco-8000 more flexibility to easily add subcommnads under show platform
9f2607d [config reload] Fixing config reload when timer based services are disabled
This reverts commit 90a849ea85.
#### Why I did it
The interfaces unit test did not cover some of the conditions in interfaces.j2 that was changed in #11204. Therefore reverting the change and add the tests before making the change to interfaces.j2.
#### How I did it
Git revert.
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
#### Link to config_db schema for YANG module changes
#### A picture of a cute animal (not mandatory but encouraged)
Updating sonic-utilities sub module with the following commits
ca785a2 Remove sonic-db-cli
#### Why I did it
To fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/Azure/sonic-buildimage/issues/10218
sonic-db-cli re-write with c++ and move to sonic-swss-common repo.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
ca785a2 Remove sonic-db-cli
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
Updating sonic-utilities sub module with the following commits
40a685c [azp] Fix the 'make check' failure at the step 'Compile sonic sairedis'
ecf5bbc [sonic-cli] Fix sonic-db-cli output format not backward compatible with python version issue.
34c4b05 [portcounter] Check if counter ID exists before arithmetic operation
#### Why I did it
To fix sonic-db-cli output format not backward compatible with python version issue, need update sonic-swss-common submodule.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
40a685c [azp] Fix the 'make check' failure at the step 'Compile sonic sairedis'
ecf5bbc [sonic-cli] Fix sonic-db-cli output format not backward compatible with python version issue.
34c4b05 [portcounter] Check if counter ID exists before arithmetic operation
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
To implement Syslog Source IP feature based on HLD: https://github.com/sonic-net/SONiC/pull/1002
- How I did it
Added the relevant yang model
- How to verify it
Added unit test
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
Support the following tables which were introduced during dynamic buffer calculation
- LOSSLESS_TRAFFIC_PATTERN
- DEFAULT_LOSSLESS_BUFFER_PARAMETER
#### How I did it
- LOSSLESS_TRAFFIC_PATTERN
|name|type|range|mandatory|description|
|---|---|---|---|---|
|mtu|uint16|64~10240|true|The maximum packet size of a lossless packet|
|small_packet_percentage|uint8|0~100|true|The percentage of small packet|
- DEFAULT_LOSSLESS_BUFFER_PARAMETER
|name|type|range|mandatory|description|
|---|---|---|---|---|
|default_dynamic_th|int8|-8~7|true|The default dynamic_th for all buffer profiles that are dynamically generated for lossless PG|
|over_subscribe_ratio|uint16|-|false|The oversubscribe ratio for shared headroom pool.|
|||||Semantically, the upper bound is the number of physical ports but it can not be represented in the yang module. So we keep the upper bound open. As the type is (signed) integer whose lower bound is 0 by nature, we do not need to specify the range.|
#### How to verify it
Run unit test
Update the bcm config file system_ref_core_clock_khz param to handlesystems with J2cplus linecards.
We need system_ref_core_clock_khz to be set to 1600000 for supporting j2 and j2cplus linecards on the same chassis.
#### Why I did it
There might be a case where service checker periodic operation determined that specific container is running but when it tries to perform an operation on it, it was already closed by the user. This is a valid flow and we should not log an error message, informative warning is enough.
#### How I did it
I reduce log severity.
#### How to verify it
I verified it manually.
The return statement does not end with a semicolon in function scheduler_csm_socket_cleanup, which generates a compilation warning and may cause unexpected problems.
Signed-off-by: ouxiaolong <ouxiaolong@asterfusion.com>
05c79ef Fix header for the output table following 'show ipv6 interface' command (#2219)
fc5633f increase coverage to 80% (#2214)
c0dffba [config][muxcable] fix minor config DB logic issue (#2210)
a50eca0 [generic-config-updater] Add NTP validator (#2212)
a3d1345 [gendump] Add Support to dump BCM-DNX commands (#1813)
bb185d5 [yang] remove mistakenly added parameter for 'get_module_name' (#2193)
2cccf26 [counters] skip showing counters that are not enabled (#2199)
ff05bc8 [config][muxcable] Add support for displaying soc_ipv4 and cable_type in config/show muxcable commands (#2189)
3197f39 Add check to not allow deleting PO if its member of vlan. (#2141)
2513da1 [dump] Optimized dump state cli and modified tests to not use common data (#2175)
9e310e5 Fix sonic-installer and 'show version' command crash when database docker not running issue. (#2183)
4ad70b9 [sonic-installer] use host docker startup arguments when running dockerd in chroot (#2179)
3d3c89b fix for non-coherent cmis modules (#2163)
2054680 [subinterface] Fix route add command to accept subinterface as dev (#2180)
5383e92 [subinterface]Avoid removing the subinterface when last configured ip is removed (#2181)
f5af780 [GCU] Handling type1 lists (#2171)
4516179 [yang] extend ConfigMgmt constructor to pass YANG options (#2118)
2f53bd4 [dump] implement ACL modules (#2153)
494dd62 show commands for SYSTEM READY (#1851)
4fc09b1 [GCU] Handling non-compliant leaf-list with string values (#2174)
675c7b6 Add sonic-delayed.target to Application Extension .timer file generator (#2176)
c587933 [portconfig] Allow to configure interface mtu for physical ports only
9881f3e Broadcast Unknown-multicast and Unknown-unicast Storm-control (#928)
88286cb sonic-utils: initial support for link-training (#2071)
* [Interfaces] Modify template to support multiple management interfaces
* Modify minigraph to process interfaces in sorted order
Signed-off-by: Ubuntu <gechen@gechen-sonic-dev.d0r25nej54guppclip4gpy5b5a.jx.internal.cloudapp.net>
* Add UT minigraph
Signed-off-by: Ubuntu <gechen@gechen-sonic-dev.d0r25nej54guppclip4gpy5b5a.jx.internal.cloudapp.net>
* make case insensitve comparison
Signed-off-by: George Chen <gechen@microsoft.com>
* Use natural sort
Signed-off-by: George Chen <gechen@microsoft.com>
Co-authored-by: Ubuntu <gechen@gechen-sonic-dev.d0r25nej54guppclip4gpy5b5a.jx.internal.cloudapp.net>
* [sflow + dropmon] added INCLUDE_SFLOW_DROPMON flag, added patches for hsflowd
*Added a capability of monitoring dropped packets for the sFlow daemon in order to improve network - monitoring, diagnostic, and troubleshooting. The drop monitor service allows the sFlow daemon to export another type of sample - dropped packets as Discard samples alongside Counter samples and Packet Flow samples.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
- Why I did it
An issue is encountered when a value "False" is written for a feature in "check_up_status" field, which does not pass YANG validation.
- How I did it
We usually use stypes::boolean_type for such fields, even in this YANG model. This custom type, supports "False" value.
- How to verify it
Write "False" in "check_up_status" field and see if YANG validation passes.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
To address internal build failures where the cable len for some of the skus is set to 300m for all tiers.
How I did it
For the buffers test, generate a new output file based off the original expected output with CABLE_LENGTH table updated to use 300m. In the comparison logic, compare against each of the expected output files and if any matches, the testcase is set to pass
Signed-off-by: Neetha John <nejo@microsoft.com>
* 48cccb4 2022-06-13 | do not use sai_query_api_version if vendor sai does not support in VendorSai.cpp (#1064) (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 9b0f773 2022-06-13 | [vslib]: Fixbug in cleanup MACsec device (#1059) [Ze Gan]
* cdf9427 2022-06-11 | No sai api version check if vendor sai does not support (#1063) (HEAD, origin/master, origin/HEAD) [Guohan Lu]
* 3964cf1 2022-06-09 | [counter] Fix port flex counter (#1052) [Junhua Zhai]
* 2231b7a 2022-06-03 | Purge package sonic-db-cli which depends on libswsscommon (#1057) [Qi Luo]
* 7aa09b9 2022-06-01 | Set PR diff code coverage threshold to 80% (#1039) [Kamil Cudnik]
* 66a29bc 2022-05-18 | [syncd] Use vendor SAI instead of direct SAI api (#1042) [Kamil Cudnik]
* 564bea7 2022-05-18 | [ci] Paralize azure pipeline (#1040) [Shilong Liu]
* 57ed180 2022-05-17 | [configure.ac] implement SAI API version check (#1000) [Stepan Blyshchak]
* 8894dc7 2022-05-17 | vslib: add support for read-only port capabilities (#1038) [Dante (Kuo-Jung) Su]
* 42af975 2022-04-29 | [vslib]: Update packet number of MACsec SA at runtime (#1007) [Ze Gan]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
29503ab [portchannel] Added ACL/PBH binding checks to the port before getting added to portchannel (#2151)
ac89489 Modify override testcase to cover PORT admin_status (#2165)
d7953d2 [GCU] Validate peer_group_range ip_range are correct (#2145)
aa81b97 [auto-ts] add memory check (#2116)
b370290 support new interface types CR8/SR8/KR8/LR8 which are brougnt by SAI V.1.10.2 (#2167)
87fc0a4 [scripts/fast-reboot] Add option to include ssd-upgrader-part boot option with SONiC partition (#2150)
90abc07 [config reload] Fix invalid rstrip. (#2157)
fac1769 Accept 0 for queue and dscp (#2162)
* [Tunnel PFC] Tests for adding property 'sai_remap_prio_on_tnl_egress'
Add tests for adding property 'sai_remap_prio_on_tnl_egress', this
property should only be added in dual tor environment.
Test done:
Run test test_j2files.py
Co-authored-by: richardyu <richardyu@contoso.com>
Why I did it
Provide fix for comment: https://github.com/Azure/sonic-buildimage/pull/10475/files#r847753187;
Move laoding database config to application code instead of portconfig as portconfig is used as a library.
#10581 was raised for this fix, but had to be reverted due to issue with multi-asic platform.
How I did it
Remove try exception handing from portconfig.py during config_db intialization.
Move loading of database config to application that uses portconfig.py.
How to verify it
unit-test passes.
Verified that it does not cause issue during boot up of multi-asic VS image.
Verified that config_db generation was successful in multi-asic VS.
* [BGP]Adding configuration knob to allow advertise Loopback ipv6 /128 prefix
By default when IPv6 address is configured with /128 as subnet mask in Loopback0 interface, it will be advertised as prefix with /64 subnet.
To control this behavior a new field 'bgp_adv_lo_prefix_as_128' is introduced in DEVICE_METADATA table which when set to true will advertise prefix with /128 subnet as it is.
Why I did it
As part of PCBB changes, we need to enable 2 extra lossless queues. The changes in this PR are done to adjust only the reserved sizes on Th2 for the additional 2 lossless queues
Calculations are done based on 40 downlinks for T1 and 16 uplinks for dual ToR
How to verify it
Verified that the rendering works fine on Th2 dut
Unit tests have been updated to reflect the modified buffer sizes when pcbb is enabled. There are existing testcases that will test the original buffer sizes when pcbb is disabled. With these changes, was able to build sonic-config-engine wheel successfully
Signed-off-by: Neetha John <nejo@microsoft.com>
#### Why I did it
Switch py-common from swsssdk to swsscommon.
#### How I did it
Change code and make file to use swsscommon.
#### How to verify it
Pass all UT and E2E test.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Recently the nightly testing pipeline found that the autorestart test case was failed when it was run against master image. The reason is Restart= field in each container's systemd configuration file was set to Restart=no even the value of auto_restart field in FEATURE table of CONFIG_DB is enabled.
This issue introduced by #10168 can be reproduced by the following steps:
Issues the config command to disable the auto-restart feature of a container
Runs command config reload or config reload minigraph to enable auto-restart of the container
Checks Restart= field in the container's systemd config file mentioned in step 1 by running the command
sudo systemctl cat <container_name>.service
Initially this PR (#10168) wants to revert the changes proposed by this: #8861. However, it did not fully revert all the changes.
How I did it
When hostcfgd started or was restarted, the Restart= field in each container's systemd configuration file should be initialized according to the value of auto_restart field in FEATURE table of CONFIG_DB.
How to verify it
I verified this change by running auto-restart test case against newly built master image and also ran the unittest:
Signed-off-by: bingwang <bingwang@microsoft.com>
Why I did it
This PR is to add two extra lossless queues for bounced back traffic.
HLD sonic-net/SONiC#950
SKUs include
Arista-7050CX3-32S-C32
Arista-7050CX3-32S-D48C8
Arista-7260CX3-D108C8
Arista-7260CX3-C64
Arista-7260CX3-Q64
How I did it
Update the buffers.json.j2 template and buffers_config.j2 template to generate new BUFFER_QUEUE table.
For T1 devices, queue 2 and queue 6 are set as lossless queues on T0 facing ports.
For T0 devices, queue 2 and queue 6 are set as lossless queues on T1 facing ports.
Queue 7 is added as a new lossy queue as DSCP 48 is mapped to TC 7, and then mapped into Queue 7
How to verify it
Verified by UT
Verified by coping the new template and generate buffer config with sonic-cfggen
#### Why I did it
Fix sonic-db-cli high CPU usage on SONiC startup issue: https://github.com/Azure/sonic-buildimage/issues/10218
ETA of this issue will be 2022/05/31
#### How I did it
Re-write sonic-cli with c++ in sonic-swss-common: https://github.com/Azure/sonic-swss-common/pull/607
Modify swss-common rules and slave.mk to install c++ version sonic-db-cli.
#### How to verify it
Pass all E2E test scenario.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
Build and install c++ version sonic-db-cli from swss-common.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
- Why I did it
Yang Model about password hardening feature, the sonic CLI of this feature was autogenerated from this Yang model
- How I did it
Create new Yang model in src/sonic-yang-models/yang-models/sonic-passwh.yang.
- How to verify it
There are unitests(yang test) in this P.R covering all the passwords policies with good and bad values cases.
Or is possible manually using the config/show password commands that were autogenerated from this Yang model. (this CLI code added in sonic-utilities)
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There was a typo in hwsku specified as part of #10889
How I did it
Replaced with the correct hwsku
How to verify it
test_cfggen.py is passing
Updating sonic-utilities sub module with the following commits
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### Why I did it
To fix hostcfgd can't terminate by sigint issue, need update sonic-swss-common submodule.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
For yang model, sample_config_db.json file was missing Sample data for the features SNAT/DNAT/IPMC
#### How I did it
Added the SNAT,DNAT,IPMC(low Threshold/high threshold/threshold_type)entries in CRM table.
#### How to verify it
With sanity Build/test only.
[muxorch] Handling optional attributes in muxorch (#2288)
Update netlink messages handler (#2233)
Broadcast Unknown-multicast and Unknown-unicast Storm-control (#1306)
[vstest]: Increase PollingConfig default timeout (#2285)
[FDB] Fix fbdorch to properly handle syncd FDB FLUSH Notif (#2254)
[macsecorch]: Support for non-default sa per sc (#2250)
Migrating the NAT vs tests from Click to direct DB access (#2278)
[neighsync] Ignoring IPv4 link local addresses (#2260)
[IntfMgrd] Retry adding ipv6 prefix by setting disabled_ipv6 flag (#2267)
Increase Redis Timeout value for Switch Create Opration for Packet (#2243)
Update fdborch.cpp (#2261)
Signed-off-by: dprital <drorp@nvidia.com>
- Why I did it
With SAI V.1.10.2, new interface types CR8/SR8/KR8/LR8 have been introduced, we should also support them from the CLI configuration.
- How I did it
Add new enum for the new interface types
- How to verify it
Run the "config interface type" command to verify new interface types can be accepted and handled correctly.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
It is to improve the build performance, when building multiple targets.
The modified time of downloaded files should be not older than the file .platform.
If not, the file will be downloaded again, when building any dependent targets.
How I did it
When downloading the packages from web site, the modified time will be changed by the command "touch".
#### Why I did it
To ensure that some internal testcases do not break due to external changes
#### How to verify it
Ran test_cfggen.py with the changes and it passed
- Why I did it
YANG schema is missing for sonic-telemetry
- How I did it
Added YANG schema to sonic-yang-models and appropriate unit tests inside of test and test_config
- How to verify it
Build sonic-yang-models python wheels target and verify that unit tests are passing
Why I did it
Upgrade FRR to version 8.2.2. Build libyang2 required by FRR.
How I did it
Update FRR version and tag.
How to verify it
Following tests were performed on sonic-vs:
BGP docker status check
BGP configuration and session establishment
Route redistribution and ping
Issued show commands to check the bgp neighbor and routes
Checked app-db to ensure bgp routes are installed with correct interface and nexthop.
Create VRF and check FRR knows the VRF
Check VRF routes are installed in app-db with correct Vrf name and next-hop
Establish BGP Evpn session and check if Evpn routes (multicast, mac, prefix) are exchanged and installed correctly in app-db.
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
resolves#10761.
For VOQ chassis, the Recirc port, which was added for the Everflow, stays admin down after load minigraph.
This PR add the fix to make the recirc port as admin up
How I did it
The PR adds a change in minigraph.py, if port has role as Rec make the the port as admin-status up.
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
To further add cable_type and soc_ipv4 field to table MUX_CABLE, this PR tries to parse the minigraph like the following:
```
<Device i:type="SmartCable">
<ElementType>SmartCable</ElementType>
<SubType>active-active</SubType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.3/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<ManagementAddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>::/0</d5p1:IPPrefix>
</ManagementAddressV6>
<SerialNumber i:nil="true" />
<Hostname>svcstr-7050-acs-1-Servers0-SC</Hostname>
</Device>
<Device i:type="Server">
<ElementType>Server</ElementType>
<Address xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>192.168.0.2/21</d5p1:IPPrefix>
</Address>
<AddressV6 xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>fc02:1000::2/64</d5p1:IPPrefix>
</AddressV6>
<ManagementAddress xmlns:d5p1="Microsoft.Search.Autopilot.NetMux">
<d5p1:IPPrefix>0.0.0.0/0</d5p1:IPPrefix>
</ManagementAddress>
<Hostname>Servers0</Hostname>
</Device>
```
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
get_mux_cable_entries will try to get the mux cable device from the devices list and get the cable type and soc ip address from the device definition.
How to verify it
Pass the unit-test
Why I did it
At present, there is no mechanism in an event driven model to know that the system is up with all the essential sonic services and also, all the docker apps are ready along with port ready status to start the network traffic. With the asynchronous architecture of SONiC, we will not be able to verify if the config has been applied all the way down to the HW. But we can get the closest up status of each app and arrive at the system readiness.
How I did it
A new python based system monitor tool is introduced under system-health framework to monitor all the essential system host services including docker wrapper services on an event based model and declare the system is ready. This framework gives provision for docker apps to notify its closest up status. CLIs are provided to fetch the current system status and also service running status and its app ready status along with failure reason if any.
How to verify it
"show system-health sysready-status" click CLI
Syslogs for system ready
What I did:
Added support to create route-map action set tag <user define value>
when the the allow prefix list matches. The tag can ben define by user in
constants.yml.
Why I did:
Since for Allow List feature we call from base route-map allow-list route-map having set tag option provides way for base route-map to do match tag and take any further action if needed. Adding tag provide metadata that can used by base route-map
Why I did it
https://github.com/Azure/SONiC/blob/master/doc/vxlan/Overlay%20ECMP%20with%20BFD.md
From the design, need to advertise the route with community string, the PR is to implement this.
How I did it
To use the route-map as the profile for the community string, all advertised routes can be associated with one route-map.
Add one file, mangers_rm.py, which is to add/update/del the route-map. Modified the managers_advertise_rt.py file to associate profile with IP route.
The route-map usage is very flexible, by this PR, we only support one fixed usage to add community string for route to simplify this design.
How to verify it
Implement new unit tests for mangers_rm.py and updated unit test for managers_advertise_rt.py.
Manually verified the test case in the test plan section, will add testcase in sonic-mgmt later. Azure/sonic-mgmt#5581
Why I did it
Config db schema generated by minigraph should run yang validation.
How I did it
Modify run_script to add yang validation.
How to verify it
Run sonic-config-engine unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
This is part of HLD Azure/SONiC#925
#### Why I did it
Add link-training support
#### How I did it
Update SONiC YANG for port link-training support
#### Description for the changelog
Add "link_training" to sonic-port.yang
#### Link to config_db schema for YANG module changes
https://github.com/sonic-net/SONiC/wiki/Configuration#port
Why I did it
Previous subport unit tests uses port channel names like PortChannel01, so for subport name generated PortChannel01.10, it exceeds Linux network interface name 15 char limit.
Signed-off-by: Longxiang Lyu lolv@microsoft.com
How I did it
Modify PortChannel01 to PortChannel1.
Why I did it
Fixes#10793
How I did it
Removed the switch_type validation from the Yang model.
How to verify it
compile sonic_yang_mgmt-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
288c2d8 Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)
bce4694 [autoneg] add support for remote speed advertisement (#2124)
a73f156 [show][vrf]Fixing show vrf to include vlan subinterface (#2158)
7a06457 [auto_ts] Enable register/de-register auto_ts config for APP Extension (#2139)
083ebcc Add transceiver-info items advertised for cmis-supported moddules (#2135)
0811214 Validate destination port is not LAG (#2053)
6ab1c51 [minigraph] Consume golden_config_db.json while loading minigraph (#2140)
c37a957 [Kdump] Remove the duplicate logic if Kdump was disabled (#2128)
1143869 Ordering fix for sfpshow eeprom (#2113)
fdb79b8 Allow fw update for other boot type against on the previous "none" boot fw update (#2040)
a54a091 [GCU] Supressing YANG errors from libyang while sorting (#1991)
fbfa8bc [GCU] Enabling AddRack and adding RemoveRack tests (#2143)
d012be9 [Command-Reference] Add CLI docs for route flow counter (#2069)
8c07d59 [Mellanox] [reboot] [asan] stop asan-enabled containers on reboot (#2107)
697aae3 Fix speed parsing when speed is NOT fetched from APPL_DB (#2138)
22a388b [show] fix get routing stack routine (#2137)
cb3a047 Support option --ports of config qos reload for reloading ports' QoS and buffer configuration to default (#2125)
154a801 Enhance "config interface type/advertised-type" to be blocked on RJ45 ports (#2112)
3732ac5 Add CLI for route flow counter feature (#2031)
29771e7 [techsupport] improve robustness (#2117)
f9dc681 [intfutil] Display RJ45 port and portchannel speed in 'M' instead of 'G' when it's <= 1000M (#2110)
781ae9f [config] Do not enable pfcwd for BmcMgmtToRRouter (#2136)
23e9398 [scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)
576c9ef [scripts/fast-reboot] stop timers in advance (#2131)
4dad79c bugfix: incorrect command for portchannel creation (#2134)
c17b1f4 [show][muxcable] Decrease the timeout for show mux status/hwmode (#2130)
49d61f8 [scripts/fast-reboot] cleanup (#2132)
52ca324 [config/config_mgmt.py]: Fix dpb issue with upper case mac in (#2066)
9e2fbf4 Update db_migrator to support `pfcwd_sw_enable` (#2087)
4010bd0 FGNHG CLI changes (#1588)
6bd54d0 Fix 'show mac' output when FDB entry for default vlan is None instead of 1 (#2126)
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
The SSCI is wrong in the output of MACsec so that the virtual SAI cannot parse the output corretly.
The wrong output:
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 103, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
SSCI 33554432, RXSC: 525400edac5b0001, state on
0: PN 107, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
offload: off
```
Expected
```
142: macsec_eth1: protect on validate strict sc off sa off encrypt on send_sci on end_station off scb off replay off
cipher suite: GCM-AES-XPN-256, using ICV length 16
TXSC: 5254008f4f1c0001 on SA 0
0: PN 252, state on, SSCI 33554432, key 12cbc4b64e26c9a1ba14d810da20d16e
RXSC: 525400edac5b0001, state on
0: PN 264, state on, key 12cbc4b64e26c9a1ba14d810da20d16e
```
#### How I did it
Move SSCI before the key so that SSCI will not be the front of SC information.
#### Why I did it
To pick up new commits:
* 60d2467 Add depends to p4rt debian package
#### How I did it
update sonic-p4rt/sonic-pins submodule pointer
#### How to verify it
should be able to build with p4rt enabled.
#### Why I did it
This function is critical for is_multi_asic() and SonicDBConfig initializing. No explicit reading ConfigDB. Otherwise it will implicitly trigger SonicDBConfig initializing.
#### How I did it
1. No explicit reading ConfigDB in get_asic_conf_file_path()
2. Collect asic_conf_path_candidates lazily to prevent any unnecessary side effect and improve the performance
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Why I did it
submodule update for the following commits
7a203b1 [chassis] Add new tables in counter db for Voq counter support. (#530)
5effea3 add new table schema for bgp profile (#608)
130dca5 [ci] Update azure pipeline branch variable reference.
708ed39 [ci] Parameterize pipeline and improve azure pipeline (#599)
9c08456 Added new P4RT tables. (#604)
#### Why I did it
Fix issue: Non compliant leaf list in config_db schema: https://github.com/Azure/sonic-buildimage/issues/9801
#### How I did it
The basic flow of DPB is like:
1. Transfer config db json value to YANG json value, name it “yangIn”
2. Validate “yangIn” by libyang
3. Generate a YANG json value to represent the target configuration, name it “yangTarget”
4. Do diff between “yangIn” and “yangTarget”
5. Apply the diff to CONFIG DB json and save it back to DB
The fix:
• For step #1, If value of a leaf-list field string type, transfer it to a list by splitting it with “,” the purpose here is to make step#2 happy. We also need to save <table_name>.<key>.<field_name> to a set named “leaf_list_with_string_value_set”.
• For step#5, loop “leaf_list_with_string_value_set” and change those fields back to a string.
#### How to verify it
1. Manual test
2. Changed sample config DB and unit test passed
Signed-off-by: Neetha John nejo@microsoft.com
Why I did it
Address build failures due to sonic config engine unit tests failing. Failures are due to referencing format used in Arista 7800 sample output for buffer template
How I did it
Remove referencing format
How to verify it
Sonic config engine wheel should be built successfully
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Fixes#10158
How I did it
Add yang model for config_db table BGP_VOQ_CHASSIS_NEIGHBOR and UT
closes#10157
Why I did it
Add yang model for the bgp_internal_neighbor table in config_db
How I did it
Add new yang model file and unit tests
How to verify it
UT and compile sonic_yang_models-1.0-py3-none-any.whl and sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
To add support for 800G speed for port in the yang.
- How I did it
Change limitation from 400G to 800G.
- How to verify it
Set a port speed to 800G and run the yang DB validation. e.g. by using dynamic port breakout.
#### Why I did it
Need to pass LY_CTX_DISABLE_SEARCHDIR_CWD to Context in order to disable automatically searching for schemas in current working directory (which is by default searched automatically)
#### How I did it
add additional attribute into YANG context
#### How to verify it
Create some invalid link on switch :
1) **ln -s /usr/abc xxx**
2) run **spm list**
--> There should not be these messages:
```
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
libyang[1]: Unable to get information about "xxx" file in "/tmp" when searching for (sub)modules (No such file or directory)
```
Add the following commits:
- [orchagent, crm]: Reset crm threshold exceed count when threshold type changed 5ba6a54786c0fd9b155bb9ea2a7ed724a58aab74
- [pbh] [aclorch] Fixed a bug causes by updating the flow-counter value for the PBH rule 841f00389b338e91ddc4de460ace4ff96adfa796
- [ACL]Avoid incrementing crm count when ACL rule create fails 3d3364f9715fa05fbdf2d09b08676c3055903b84
- set remote vtep the netdev down before delete 7f53db782aed2973f4ff6807911b5a549461f3c7
- Removing Vnet with scope default 2ea8581da4ba6f97bebde4845a234d7c810e5515
#### Why I did it
Adding exceptlionList to validation exception
#### How I did it
Check code.
#### How to verify it
Ran manually.
- Run full config validation from a KVM
- Print the thrown exception
**Before**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
```
**After**
```
Error: Data Loading Failed
All Keys are not parsed in FEATURE
dict_keys(['telemetry'])
exceptionList:["'status'"]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
Can not start sonic-hostservice
How I did it
Install python3-dbus and systemd-python, and replace invalid path
How to verify it
Start the service with below commands:
sudo systemctl start sonic-hostservice
sudo systemctl status sonic-hostservice
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
Why I did it
Allow portchannel vlan sub intf long name format as long as it follows Linux interface name length limit(<16).
How I did it
Modify the leaf name check.
How to verify it
Test case passes.
Why I did it
Provide fix for comment: https://github.com/Azure/sonic-buildimage/pull/10475/files#r847753187;
How I did it
Try exception is not required in this scenario, so remove and modify to initial db config according to single or multi-asic platforms.
How to verify it
Verified on multi-asic device.
* [CG-Fix-CVE-2021-44906] Patching on thrift.0.14.1 for package minimist
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* add more information in patch
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* Update 0003-Remove-minimist-packages.patch
* change the thrift 0.14.1 to package download
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* use the series file for patching
* fix a code defect
#### Why I did it
Fix several bugs:
1. If one vlan member belongs to multiple vlans, and if any of the vlans is "Tagged" type, we respect the tagged type
2. If one vlan member belongs to multiple vlans, and all of the vlans have no "Tagged" type, we override it to be a tagged member
3. make sure `vlantype_name` is assigned correctly in each iteration
#### How to verify it
1. Test the command line to parse a minigraph and make sure the output does not change.
```
./sonic-cfggen -m minigraph.mlnx20.xml
```
The minigraph is for HwSKU Mellanox-SN2700-D40C8S8.
2. Test on a DUT with HwSKU Mellanox-SN2700-D40C8S8
```
sudo config load_minigraph
show vlan brief
```
Checked the "Port Tagging" column in the output.
* [build]: Patch debootstrap to not unmount the host's /proc filesystem
Currently, when the final image is being built (sonic-vs.img.gz,
sonic-broadcom.bin, or similar), each invocation of sudo in the
build_debian.sh script takes 0.8 seconds to run and execute the actual
command. This is because the /proc filesystem in the slave container has
been unmounted somehow. This is happening when debootstrap is running,
and it incorrectly unmounts the host's (in our case, the slave
container's) /proc filesystem because in the new image being built,
/proc is a symlink to the host's (the slave container's) /proc. Because
of that, /proc is gone, and each invocation of sudo adds 0.8 seconds
overhead. As a side effect, docker exec into the slave container during
this time will fail, because /proc/self/fd doesn't exist anymore, and
docker exec assumes that that exists.
Debootstrap has fixed this in 1.0.124 and newer, so backport the patch
that fixes this into the version that Bullseye has.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* [build_debian.sh]: Use eatmydata to speed up deb package installations
During package installations, dpkg calls fsync multiples times (for each
package) to ensure that tht efiles are written to disk, so that if
there's some system crash during package installation, then it is in at
least a somewhat recoverable state. For our use case though, we're
installing packages in a chroot in fsroot-* from a slave container and
then packaging it into an image. If there were a system crash (or even
if docker crashed), the fsroot-* directory would first be removed, and
the process would get restarted. This means that the fsync calls aren't
really needed for our use case.
The eatmydata package includes a library that will block/suppress the
use of fsync (and similar) system calls from applications and will
instead just return success, so that the application is not blocked on
disk writes, which can instead happen in the background instead as
necessary. If dpkg is run with this library, then the fsync calls that
it does will have no effect.
Therefore, install the eatmydata package at the beginning of
build_debian.sh and have dpkg be run under eatmydata for almost all
package installations/removals. At the end of the installation, remove
it, so that the final image uses dpkg as normal.
In my testing, this saves about 2-3 minutes from the image build time.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Change ln syntax to use chroot
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
9ac12bf (HEAD -> master, origin/master, origin/HEAD) Fix platform daemon chassisd to handle auto restart on fail (#247)
24fba04 [ycable] fix the logic to update cable_info values when ycable is not present; fix read side logic for ycable (#249)
Updating sonic-utilities sub module with the following commits
f09bd31 Fix UT failed cause by change pycommon to use swsscommon
c092300 Increased pcied unit test coverage to > 80%
7d7c85e Modular chassis: Psud set master led on first run
7195dcc Remove py2 from pipeline
c2e7393 [ycabled] increase UT coverage of ycabled daemon
#### Why I did it
When change pycommon to use swsscommon UT failed in sonic-platform-daemon, need submodule update with UT issue fix.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
Fix UT failed cause by change pycommon to use swsscommon
Increased pcied unit test coverage to > 80%
Modular chassis: Psud set master led on first run
Remove py2 from pipeline
[ycabled] increase UT coverage of ycabled daemon
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
[Build]: Fix pip version constraint conflict issue
When a version is specified in the constraint file, if upgrading the version in build script, it will have conflict issue.
How I did it
If a specified version has specified in pip command line, then the version constraint will be skipped.
* [device config] Adding configuration for default route fallback
* Set sai_tunnel_underlay_route_mode attribute to fallback to default route if more specific route is unavailable.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, PORT table does not have 'lanes' and 'speed' field.
How I did it
Make cfggen command fail when 'lanes' and 'speed' are not provided
How to verify it
Run 'sonic-cfggen -m xxx.xml --print-data' to make sure command fail when 'lanes' and 'speed' not in PORT table
Why I did it
minigraph parser has introduced new type.
How I did it
Update yang models to support BmcMgmtToRRouter.
How to verify it
Run unit test for sonic-yang-models
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
As of https://github.com/Azure/sonic-swss-common/pull/587 the blackout issue in ConfigDBConnector has been resolved.
In the past hostcfgd was refactored to use SubscriberStateTable instead of ConfigDBConnector for subscribing to CONFIG_DB updates due to a "blackout" period between hostcfgd pulling the table data down and running the initialization and actually calling `listen()` on ConfigDBConnector which starts the update handler.
However SusbscriberStateTable creates many file descriptors against the redis DB which is inefficient compared to ConfigDBConnector which only opens a single file descriptor.
With the new fix to ConfigDBConnector I refactored hostcfgd to take advantage of these updates.
#### How I did it
Replaced SubscriberStateTable with ConfigDBConnector
#### How to verify it
The functionality of hostcfgd can be verified by booting the switch and verifying that NTP is properly configured.
To check the blackout period you can add a delay in the hostcfgd `load()` function and also add a print statement before and after the load so you know when it occurs. Then restart hostcfgd and wait for the load to start, then during the load push a partial change to the FEATURE table and verify that the change is picked up and the feature is enabled after the load period finishes.
#### Description for the changelog
[hostcfgd] Move hostcfgd back to ConfigDBConnector for subscribing to updates
Why I did it
Running warm-reboot in a loop for 500 times leads to this error on 318-th iteration:
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors Traceback (most recent call last):
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors File "/usr/bin/restore_neighbors.py", line 24, in <module>
Apr 2 15:56:27.346747 sonic INFO swss#/supervisord: restore_neighbors from scapy.all import conf, in6_getnsma, inet_pton, inet_ntop, in6_getnsmac, get_if_hwaddr, Ether, ARP, IPv6, ICMPv6ND_NS, ICMPv6NDOptSrcLLAddr
Apr 2 15:56:27.346795 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/all.py", line 25, in <module>
Apr 2 15:56:27.346956 sonic INFO swss#/supervisord: restore_neighbors from scapy.route import *
Apr 2 15:56:27.346995 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/route.py", line 205, in <module>
Apr 2 15:56:27.347089 sonic INFO swss#/supervisord: restore_neighbors conf.iface = get_working_if()
Apr 2 15:56:27.347129 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/linux.py", line 128, in get_working_if
Apr 2 15:56:27.347213 sonic INFO swss#/supervisord: restore_neighbors ifflags = struct.unpack("16xH14x", get_if(i, SIOCGIFFLAGS))[0]
Apr 2 15:56:27.347250 sonic INFO swss#/supervisord: restore_neighbors File "/usr/local/lib/python3.7/dist-packages/scapy/arch/common.py", line 31, in get_if
Apr 2 15:56:27.347345 sonic INFO swss#/supervisord: restore_neighbors return ioctl(sck, cmd, struct.pack("16s16x", iff.encode("utf8")))
Apr 2 15:56:27.347365 sonic INFO swss#/supervisord: restore_neighbors OSError: [Errno 19] No such device
The issue was reported to scapy devs secdev/scapy#3369, the fix is secdev/scapy#3371, however there is no released scapy version with this fix right now, thus decided to build scapy v2.4.5 from sources and apply the fix in a form of a patch.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
In order to include the following commit:
0f06910 [PBH] Implement Edit Flows (Azure/sonic-swss#2169)
sonic-swss
50d5be2 Make changes to support compiling on Bullseye with GCC 10 (#2216)
0870cf5 [mirrororch]: Implement HW resources availability validation for SPAN/ERSPAN (#2187)
f4ec565 [vlanmgrd] fix use-after-free memory issue (#2211)
c2de7fc [QosOrch] The notifications cannot be drained in QosOrch in case the first one needs to retry (#2206)
5575935 [neighsyncd] increase neighsyncd timeout (#2209)
0f06910 [PBH] Implement Edit Flows (#2169)
6241bbf Remove redundant and problematic code to skip "pool" field in buffer profile handling (#2197)
a55343c [azp]: Set diff coverage threshhold to 80% (#2188)
390cae1 [portsorch]: Prevent LAG member configuration when port has active ACL binding (#2165)
c1d47e6 [VNET]Fixing nexthop group delete during route change (#2198)
8941cc0 [BFD]Registering BFD state change callback during session creation (#2202)
680c539 [vxlan] Remove tunnel map objects on VNET tunnel removal (#2150)
20dde0c Fix for handling broadcom DNX ASIC to have ipv4 and ipv6 ACL rules in separate tables. (#2178)
5b7c949 [FdbOrch] SAI_FDB_EVENT_MOVE generates update with empty update.entry.port_name (#2200)
7350d49 [Vxlanmgr] vnet netdev cleanup during config reload fix (#2191)
2bef62b Validate LAG has members before mirror session create (#2130)
1e4d4ce [VS test] Increase VS test time, skip dpb flaky test (#2195)
6eda965 [vstest]Migrating vs tests from using click commands to direct DB access (#2179)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide speed for port table.
How I did it
Update minigraph xml.
How to verify it
Run sonic-cfggen unit test.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Fix#9746
How I did it
Split the check condition based on non-exist and zero length.
How to verify it
Run verification script when table contains empty value
890f32f LLDPLocalSystemDataUpdater Exception Log Handled (#249)
2151731 Handle error seen on system where vlan interface map is not present (#246)
c6141c7 [build] use Azure.sonic-buildimage.official.vs pipeline as artifact source (#248)
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Why I did it
ASN range is from 1 to 4294967295, need to remove invalid ASN.
How I did it
Update unit test and replace ASN 0.
How to verify it
Run unit test for sonic-config-engine.
Signed-off-by: Gang Lv ganglv@microsoft.com
In order to include the following commit:
c752457 [PBH] Implement Edit Flows (Azure/sonic-utilities#2093)
sonic-utilities
f70dc27 [techsupport] Handle minor fixes of TS Lock and update auto-TS (#2114)
51d3550 Fix issues in clear_qos (#2122)
6d3aa1e [GCU] Optimizing moves by adding generators for keys/tables (#2120)
65a5a6b Fixing get port speed when oper status is down (#2123)
c752457 [PBH] Implement Edit Flows (#2093)
827358f [debug dump] dump interface module added (#2070)
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Why I did it
Need to run yang validation for sonic-cfggen unit test, and many unit test does not provide lanes for port table.
How I did it
Update port config file.
How to verify it
Run sonic-cfggen unit test,
Use below PR to verify
#10228
Signed-off-by: Gang Lv ganglv@microsoft.com
*[Submodule update] sonic-py-swssdk
78f167e4728f939712b3f3ea550949e2ea675fec With the changes in PR:https://github.com/Azure/sonic-buildimage/pull/5289 access to redis unix socket is given to the redis group members. Many of sonic-util commands (especially in multi-asic) case use redis unix socket to connect to DB and thus those comamnd fails without providing sudo. This PR is continuation of PR: https://github.com/Azure/sonic-buildimage/pull/7002 where we default to use TCP for Redis if user is not root
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
To take the following into sonic-buildimage
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
[sonic-swss-common](https://github.com/Azure/sonic-swss-common)
```
36e1f61 API endpoints to ConfigDBConnector to support pre-loading data without blackout (#587)
556f4ad Add SAI copy action to ACL schema (#591)
db18c3a Fix bitwidth of mac address in SAI ACL schema (#590)
e9442bb [ConfigDBPipeConnector]: Added set_entry API (#586)
6c007c0 Update README for gmock (#562)
```
[sonic-linkmgrd](https://github.com/Azure/sonic-linkmgrd)
```
83dfc99 Enforce uniform file/class naming convention (#52)
83004bf Shutdown ICMP heartbeats when default route state is missing and ToR is in `auto` mode (#44)
b81ea31 Add `LinkProberStateMachineActiveActive` (#47)
c43cf7a Decrease link probing interval after switchover to better determine the overhead of a toggle (#43)
2239fbe Enhance clang format (#46)
```
#### How I did it
* Advanced submodules pointers
#### How to verify it
1. make configure PLATFORM=mellanox
2. make target/sonic-mellanox.bin
Why I did it
dhcp_server is introduced, and need to update yang model.
How I did it
Update yang models and add unit test.
How to verify it
Run unit test for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
1ccda8d MACsec in Gearbox (#993)
7a2b824 Update SAI submodule (#1015)
418d5fb Add pre match logic for lag member (#1008)
Signed-off-by: Myron Sosyak <myronx.sosyak@intel.com>
#### Why I did it
When too many user login concurrently and run commands, SONiC may kernel panic on some device which has very limited memory.
#### How I did it
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### How to verify it
Manually validate the j2 template can generate correct config file.
#### Which release branch to backport (provide reason below if selected)
- [x] 201811
- [ ] 201911
- [ ] 202006
- [x] 202012
- [x] 202106
- [x] 202111
#### Description for the changelog
Add j2 template for setup pam_limit plugin for limit SSH session per-user.
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
sonic-config-engine unit test is using invalid switch_type
How I did it
Update xml with correct switch_type
How to verify it
Run UT for sonic-config-engine
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
To support vlan sub intf short naming format, like subport Eth8.100 for parent portEthernet8 with vlan id 100.
How I did it
Add checks to must condition to verify there is a port or portchannel with the index same as the vlan sub intf.
How to verify it
Run the unttests.
Update sonic-utilities submodule to include below commits:
510a9b9 Add date to show version (#2086)
61b1396 [sfpshow][recycle_port] sfpshow script needs to skip recycle ports (#2109)
4681697 Support command `show ip fib` and `show ipv6 fib` (#2100)
2a982a1 Update `config mirror_session` CLI to support heximal gre type value (#2095)
b25f1e1 [generic-config-updater] Add caclrule validator (#2103)
968900c [sonic-package-manager] do not mod_config for whole config db when setting init_cfg (#2055)
bf55ceb [nvgre] Added auto-generated CLI plugins and test for NVGRE Tunnel feature (#1915)
8389c81 [sonic-cli-gen] fix failure "Error: digits_class" when field "digit_class" does not exist in DB (#2054)
f71ef64 Fix import statement in mclag.py (#2073)
For Bullseye, Python 2 isn't present at all. This means that in certain
build cases (such as building something only for Bullseye), the version
file may not exist, and so the sort command would fail.
For most normal build commands, this probably won't be an issue, because
the SONiC build will start with Buster (which has both Python 2 and
Python 3 wheels built), and so the py2 and py3 files will be present
even during the Bullseye builds.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Update sonic-py-swsssdk submodule to include below commits:
96c0590 [port_util] Fix issue: port_util.get_vlan_interface_oid_map should not raise exception when DB has not RIF data (#117)
96da8b9 [build] pin pytest-azurepipelines version (#119)
Signed-off-by: Suvarna Meenakshi <sumeenak@microsoft.com>
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/2049
from caclmgr:
- PRIORITY is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L548))
- PACKET_ACTION is a required field [code](3fa18d18d4/src/sonic-host-services/scripts/caclmgrd (L581))
I think PRIORITY is a required field for ACLs not only CTRLPLANE ACLs
#### How I did it
Check code.
#### How to verify it
Unit-test
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/SONiC/wiki/Configuration.
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
To fix https://github.com/Azure/sonic-buildimage/issues/9643
#### How I did it
Instead of ast.literal_eval added python2 compat code for json strings unicode -> str convertion.
We need python2 compatibility since py2 sonic config engine (buster/sonic_config_engine-1.0-py2-none-any.whl target) is still included into the build (ENABLE_PY2_MODULES flag is set for buster). Once we abandon buster and python2, this compat and ast.literal_eval could be cleaned up all through the code base.
#### How to verify it
run steps from the linked issue
Why I did it
support to collect version when purging debian package
Support to collect version multiple times
How I did it
Add the collection action before purging.
Updating sonic-snmpagent submodule with the following commits
dae8146 [ci]: Support code diff coverage
6bd51c4 Fix: LAG counters, if LAG don't have L3 interface
2654f4a Fix snmp agent Initialize config DB multiple times issue
#### Why I did it
When change pycommon to use swsscommon UT failed in sonic-snmpagent, need submodule update with UT issue fix.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
[ci]: Support code diff coverage
Fix: LAG counters, if LAG don't have L3 interface
Fix snmp agent Initialize config DB multiple times issue
#### A picture of a cute animal (not mandatory but encouraged)
Updating sonic-utilities sub module with the following commits
b00b870 [build] stop vstest in the Azure pipeline
2c56e92 [GCU] Marking fields under BGP_PEER_RANGE, BGP_MONITORS as create-only
6289987 Fix sonic-installer failure due to missing import
45e6ac1 [show] add support for hwstatus in show muxcable status
93384ed Try get port operational speed from STATE DB
483fc6e [techsupport] Added a lock to avoid running techsupport in parallel
398da58 Validation check correction while adding a member to PortChannel
a8a7edb [generate_dump] exclude mft and mlx folders from /etc
1cf1d03 Fix UT failed cause by change pycommon to use swsscommon
#### Why I did it
PR https://github.com/Azure/sonic-utilities/pull/1825 added validation for the input of `config mirror session add`, and only decimal value is accepted.
An issue https://github.com/Azure/sonic-buildimage/issues/10096 was raised to suggest accepting HEX value as well, and the suggestion makes sense to me.
To accept HEX value for GRE type, and keep backward compatibility as well, I updated the YANG model to support both decimal and hexadecimal input for GRE type.
#### How I did it
Update the regex for GRE type.
#### How to verify it
Verified by UT
```
platform linux -- Python 3.9.2, pytest-6.0.2, py-1.10.0, pluggy-0.13.0
rootdir: /sonic/src/sonic-yang-models
plugins: pyfakefs-4.5.4, cov-2.10.1
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py . [100%]
========================================================================================== 3 passed in 2.53s ==========================================================================================
```
#### Description for the changelog
Update YANG model for mirror session to support decimal value for GRE type.
f00efef Longxiang Lyu Wed Mar 16 09:12:46 2022 +0800 Add a command line option to store logs into a separate file (#41)
ff2e67d Longxiang Lyu Tue Mar 15 09:10:59 2022 +0800 Add default port cable type (#39)
ebbb4d8 Jing Zhang Mon Mar 14 15:41:11 2022 -0700 Prevent switching MUX to "Unknown" (#36)
c779b8f Longxiang Lyu Thu Mar 10 21:35:11 2022 +0800 [nonfunctional] Use LinkProberStateMachineBase (#38)
b9fedd0 Longxiang Lyu Wed Mar 9 13:03:58 2022 +0800 [NONFUNCTIONAL] Add LinkProberStateMachineBase (#37)
bedd42b Longxiang Lyu Wed Mar 9 10:03:00 2022 +0800 Add .clang-format file to format code (#28)
9fe4fc6 Guohan Lu Thu Mar 3 17:51:43 2022 -0800 [doc]: add lgtm badge in README.md
c1249d9 Longxiang Lyu Wed Mar 2 18:05:18 2022 +0800 Enable lgtm (#33)
b8514c6 Longxiang Lyu Wed Mar 2 13:34:39 2022 +0800 Collect port cable type to use corresponding state machine (#31)
9b59ef9 Longxiang Lyu Wed Mar 2 07:19:33 2022 +0800 Improve make clean (#32)
#### Why I did it
Fixing issue https://github.com/Azure/sonic-buildimage/issues/9991
The ACL RULE table field ETHER_TYPE can accept both hex as well as decimal values. However yang model didn't allow decimal values. Fixed it to allow decimal values (same pattern as in hex (1536-65535)
#### How I did it
Updated yang model to handle decimal values
#### How to verify it
Added UT to verify it.
#### Why I did it
```
Update submodule sonic-restapi
bd97dfe Fix urllib3 CVE-2021-33503 issue (#104)
f159bfa Upgrade the containers to be based on Debian Buster (#103)
a1830c1 (origin/201911) Fix OpenAPI spec to be readable by autorest (#101)
```
#### Why I did it
Moved Configuration.md from swss to yang folder. The configuration schema should be present along with yang models and when users add yang model they could update configuration document as well.
Update sonic-swss with the following changes:
29d5d8da Use abort instead of exit in case calling SAI API failure (#2170)
12f980c8 Fix issue config qos reload causing orchagent aborted via tracking dependencies among QoS tables (#2116)
6e5ed1c0 [chassis][syncd][sai] Adjusting response timeout during syncd init (#2159)
0a99f546 Try get port operational speed from STATE DB (#2119)
828cccfe [crm] Use sai_object_type_get_availability() API to get counters (#2098)
18c73a19 Allow IPv4 link-local nexthops (#1903)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
To implement blocking feature state change.
- How I did it
Record the actual feature state in STATE DB from hostcfg.
- How to verify it
UT + verification by running on the switch and checking STATE DB.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
e56e9b4 Fix CVE-2021-3121 warning (#96)
bf1be4f [ci]: Support code diff coverage threshold 50% (#94)
64e516c Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation (#80)
e426388 [ci]: Support azp code coverage (#87)
* fix allow list issue
Signed-off-by: stormliang <stormliang@microsoft.com>
* add the ipaddress in the install list
* add unit test
Co-authored-by: Ubuntu <azureuser@SONIC-SH-STORM-02.5pu3m0fajw1edcfltykk1gauxa.gx.internal.cloudapp.net>
Why I did it
Failed to remove part of configuration of bgp allowed prefix list. The details in #10141
How I did it
There are two issues:
In FRR, ipv6 default route is ::/0, but in the configuration, it is 0::/0, string comparison would be false, but why ipv4 failed to remove the allowed prefix list, ipv6 works? Looks into next one for the answer.
The current managers_allow_list doesn’t support removal part of the prefix list. But why IPv6 works in 1? It is because the bug for the IPv6 default route comparison, it would do the update no matter what is the operation (the code will compare the prefix list in the FRR and configuration db, if all configurations in db are presented in FRR, it do nothing, otherwise it will update the prefix list based on the configuration from db).
How to verify it
Follow the step in #10141
47c243e [show][muxcable] fix the sudo access error for show muxcable metrics (#2083)
f872516 [muxcable][show] enhance show mux status to show last switchover time (#2067)
d440df7 [warmboot] Migrate 10G ports during warm-reboot on s6100 (#2064)
494c6d7 [counterpoll] Display the correct default poll interval for watermark counters (#2082)
499988e [show][config] add muxcable command line support for retrieve / reset ICMP packet loss data (#2046)
8b01d3e Remove the warning message appear when there are no ports on CONFIG DB (#2050)
ed6e66e [GCU] Supporting Groupings during path-xpath translation (#2044)
25b3455 [ci] Use official build debian pkg instead and parameterize source branch (#2079)
Why I did it
Config db schema generated by minigraph can’t pass yang validation, deployment_id can’t be none for yang validation.
How I did it
Update minigraph.py, skip deployment_id with None value
How to verify it
Run UT for sonic-config-enginue.
Run command 'sonic-cfggen -m tests/multi_npu_data/sample-minigraph-noportchannel.xml -p tests/multi_npu_data/sample_port_config-3.ini -n asic3 --print-data'.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Desired the log message destination to be syslog and it misses the critical info.
How I did it
Non logical code changes only.
Logging update, just for one message only
a) The log message is directed to /var/log/syslog, instead of /var/log/auth.log
b) Include user alias in the message
How to verify it
Pick a user alias that has not logged into the switch yet
Add this alias to /etc/tacplus_user
Attempt to login as that user
Look for the error message in /var/log/syslog
e.g. "Feb 18 19:16:41.592191 sonic ERR sshd[5233]: auth fail: Password incorrect. user: user_xyz"
Why I did it
Smartmontools 6.6 has an issue with reading SMART info of nvme SSD
Smartmontools can be installed with apt-get, no need to build and install
How I did it
Use apt-get to install smartmontools 7.2-1
Remove previous make files for smartmontools 6.6
How to verify it
verify with "smartctl" can read out correct SMART info on NVME ssd.
verify "show platform ssdhealth" can still work
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
Multi-asic platform add aisc_port_name and role to PORT table, and port_index range is changed.
How I did it
Update sonic-port.yang, add asic_port_name and role, and remove range limitation.
How to verify it
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
ACL doesn't have mirror related action
How I did it
Add 'MIRROR_INGRESS_ACTION' and 'MIRROR_EGRESS_ACTION' to sonic-acl.yang.j2
How to verify it
Run the YANG model unit tests
Signed-off-by: Gang Lv ganglv@microsoft.com
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
end2end test is blocked by Yang model for AAA login pattern.
#### How I did it
Add pattern to AAA yang models.
#### How to verify it
Run UT for sonc-yang-models.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix#9713
#### A picture of a cute animal (not mandatory but encouraged)
ce72b0d Longxiang Lyu Thu Feb 24 06:05:12 2022 Put handler member functions as virtual in base (#30)
ef59e4f Jing Zhang Fri Feb 25 11:38:28 2022 Incrementing tolerance on mux state inconsistency (#27)
2d12892 Longxiang Lyu Wed Feb 16 03:32:06 2022 Rename LinkManagerStateMachine to ActiveStandbyStateMachine (#26)
f38634c Jing Zhang Thu Feb 17 17:23:56 2022 Update log level for mux probing and mux state chance (#23)
a8434dd Jing Zhang Thu Feb 17 17:21:01 2022 Handle xcvrd crashing scenarios (#22)
2ebdb2b Longxiang Lyu Mon Feb 14 13:26:07 2022 [make] Enable make extra includes (#24)
- Why I did it
NVGRE Tunnel feature extends the Config DB with new tables. These tables require a new YANG model.
- How I did it
Added a new YANG model sonic-nvgre-tunnel.yang
- How to verify it
Added YANG test cases.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Why I did it
During warm-reboot and fast-reboot the below error logs appear
Feb 3 22:05:15.187408 r-lionfish-13 ERR container: docker cmd: kill for nat failed with 404 Client Error for http+docker://localhost/v1.41/containers/nat/json: Not Found ("No such container: nat")
The container command when called for local mode doesn't check if it is enabled before calling docker kill which throws the above errors.
b6ca76b482/scripts/fast-reboot (L699)
How I did it
Checking feature state if local mode and returning error exit code along with valid debug message.
How to verify it
Manually tested with warm-reboot and fast-reboot
Added UT to verify it.
Why I did it
amrhf build fails while building sonic-config-engine whl package
https://dev.azure.com/mssonic/be1b070f-be15-4154-aade-b1d3bfb17054/_apis/build/builds/77089/logs/9
The reason for the failure is due to the fact that there is a new line generated at the top of the file in buffer config test cases while building for broadcom based platform and this issue is not seen in Marvell based platforms.
How I did it
Removed the new line for all the buffer test cases as there is no need to add it and accordingly changed the buffer_config.j2 where the new line is generated.
This change is adding asic_name, switch_id, switch_type and max_cores to sonic-device_metadata.yang
This should fix issue #9575
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
Why I did it
end2end test is blocked by Yang model for BGP_PEER_RANGE.
How I did it
Add new yang models.
How to verify it
Run UT for sonc-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
In the recent minigraph changes we add separate BGP session configuration for V4 and V6 internal VoQ neighbors.
This PR is adding different Peer groups for V4 and V6 neighbors
How I did it
Add VOQ_CHASSIS_V4_PEER and VOQ_CHASSIS_V6_PEER groups
Add extra Unit tests
How to verify it
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
swsscommon.ConfigDBConnector does not automatically close connection when the instance is recycled by python. So, it should not create this instance each time calling check_services. It will cause error like Failed to read from file /var/run/hw-management/led/led_status_capability - OSError(24, 'Too many open files')
- How I did it
Only connect DB once in init
- How to verify it
Manual test
Signed-off-by: Ze Gan <ganze718@gmail.com>
b9337dc (HEAD, origin/master, origin/HEAD) [vslib]: Fix MACsec bug in SCI and XPN (#1003)
edbceb9 [syncd][vslib] Keep new warm boot discovered SERDES objects (#985)
af5c156 Fix build issues on gcc-10 (#999)
1445cd5 update SAI submoule (#1001)
48fe704 [ci] pipeline fixes for VS test (#1002)
f484cf9 Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
5d0b22d Enable SAI_SWITCH_ATTR_UNINIT_DATA_PLANE_ON_REMOVAL attribute (#975)
1b8ce97 (origin/202111) [pipeline] Download swss common artifact in a separated directory (#995)
7a2e096 Change sonic-buildimage.vs artifact source from CI build to official build. (#992)
* Update sonic-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* update swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Update submodule update-swss
Signed-off-by: Ze Gan <ganze718@gmail.com>
```
Commits on Jan 31, 2022
[sonic-package-manager] implement blocking feature state change (#2035)
Commits on Feb 12, 2022
[ci] pipeline fixes for VS test (#2059)
Commits on Feb 14, 2022
[ci] allow download partially succeeded suilds for sonic-swss-pytests…
[build] allowPartiallySucceededBuilds true in the step of download so…
Commits on Feb 16, 2022
[config] Fix snmpagentaddress doesn't support the uppercase letters f…
Commits on Feb 17, 2022
[ci] Fix pipeline on build_and_install_module (#2074)
Enable diff coverage and set the threshold to 50% (#2061)
Commits on Feb 18, 2022
check for adding default vlan attempt added (#2075)
[GCU] Adding unit-test where path and ref paths are under the same YA…
[GCU] Turning port admin down before some critical port changes (#1998)
Commits on Feb 20, 2022
show_platfom_info not run for simx (#2042)
[aclshow] fix aclshow when clear is called before counters are popula…
```
#### Why I did it
1. Fix Build exception [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73911&view=logs&jobId=88ce9a53-729c-5fa9-7b6e-3d98f2488e3f&j=cef3d8a9-152e-5193-620b-567dc18af272&t=ac3bce9f-b126-5a26-3fee-28ce0ec1679d)
```
2022-02-19T01:54:23.4200556Z ImportError: cannot import name 'soft_unicode' from 'markupsafe' (/usr/local/lib/python3.8/dist-packages/markupsafe/__init__.py)
```
This is because Jinja2 uses MarkupSafe without specifying an upper limit to the version, MarkupSafe version that was released today removed 'soft_unicode'. So now Jinja2 is complaining.
Related issues:
https://github.com/pallets/jinja/issues/1591https://github.com/aws/aws-sam-cli/issues/3661
2. Reverts #9136
Fixing build failures in SONiC utils [example](https://dev.azure.com/mssonic/build/_build/results?buildId=73784&view=logs&jobId=83516c17-6666-5250-abde-63983ce72a49&j=83516c17-6666-5250-abde-63983ce72a49&t=6177235f-d4f1-5f72-835a-90ebb93a1784)
One of the errors:
```
TestPathAddressing.test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths
self = <tests.generic_config_updater.gu_common_test.TestPathAddressing testMethod=test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths>
def test_find_ref_paths__ref_is_the_whole_key__returns_ref_paths(self):
# Arrange
path = "/PORT/Ethernet0"
expected = [
"/ACL_TABLE/NO-NSW-PACL-V4/ports/0",
"/VLAN_MEMBER/Vlan1000|Ethernet0",
]
# Act
actual = self.path_addressing.find_ref_paths(path, Files.CROPPED_CONFIG_DB_AS_JSON)
# Assert
> self.assertEqual(expected, actual)
E AssertionError: Lists differ: ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0'] != ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
E
E First list contains 1 additional elements.
E First extra element 1:
E '/VLAN_MEMBER/Vlan1000|Ethernet0'
E
E - ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0', '/VLAN_MEMBER/Vlan1000|Ethernet0']
E + ['/ACL_TABLE/NO-NSW-PACL-V4/ports/0']
```
The VLAN_MEMBER backlink (can be called referrer link or ref link) is not found.
Issue introduced by https://github.com/Azure/sonic-buildimage/pull/9136
I don't know how this PR passed the build system, it should have failed.
Known YANG issue https://github.com/Azure/sonic-buildimage/issues/9312
#### How I did it
The import to `sonic-vlan` is breaking the build
```
import sonic-vlan {
prefix vlan;
}
```
I am not sure if that's the only issue, so I think reverting the whole PR should be the safer option.
#### How to verify it
Ran sonic-utils tests locally.
sonic-swss-common:
[ci] Set diff coverage threshold to 50% (#567)
Added NVGRE tunnel related tables (#549)
Add option to suppress logging (#566)
[TableBase] Make channel name from both table name and database ID (#568)
Revert "[TableBase] Make channel name from both table name and database ID (#568)" (#574)
sonic-py-swsssdk:
Add option to suppress warnings when querying Redis (#115)
- Why I did it
NVGRE Tunnel feature extends the Config DB with new tables. These tables require a new YANG model.
- How I did it
Added a new YANG model sonic-nvgre-tunnel.yang
- How to verify it
Added YANG test cases.
Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>
Why I did it
Radvd.conf.j2 template creates two copies of the vlan interface when there are more than one ipv6 address assigned to a single vlan interface. Changed the format to add prefixes under the same vlan interface block.
How I did it
Modifies radvd.conf.j2 and added unit tests
How to verify it
Configure multiple ipv6 address to the same vlan, start radvd
Unit test will check if radvd.conf with multiple ipv6 addresses is formed correctly
#### Why I did it
To bump the Thrift version to 0.14.1
- To avoid [CVE-2020-13949](https://nvd.nist.gov/vuln/detail/CVE-2020-13949)
- to fix some dependencies issues
#### How I did it
- rename `src/thrfit_0_13_0` to `src/thrift_2` to remove version number in the path. (`src/thrift` contains rules to build thrift 0.11.0 )
- Add thrift sources as submodule as there are no prepared debian packages for version >0.13.0 on [debian.org](https://packages.debian.org/search?searchon=sourcenames&keywords=thrift)
- Added patches with fixes for original thrift debian rules:(remove unneeded packages, fix multi job build)
#### How to verify it
```
BLDENV=buster make -f Makefile.work target/debs/buster/libthrift-dev_0.14.1_amd64.deb
```
Updates include the following changes in order to support new Mellanox platforms and drivers (Azure/sonic-linux-kernel#259)
10ef390 Update kconfig to support / enable newly backported mellanox patches.
6a949e1 Add backported patches for Mellanox hw-mgmt V.7.0020.1300
e1913f7 Rename and reformat patch headers
#### Why I did it
Fixing the issue https://github.com/Azure/sonic-buildimage/issues/9915
#### How I did it
Added 'not-provisioned' as a supported value for type field in DEVICE_METADATA type. This value is set during initial ZTP bring up
#### How to verify it
Added UT to verify it.
Update submodule sonic-utilities that contains the following commits:
[build] allowPartiallySucceededBuilds: true (#2043)
[system-health] Remove booting stage in system health service (#2022)
[GCU] Mark children of bgp_neighbor as create-only (#2008)
[generic_config_updater] Minor update - No logical code change (#2028)
[generic-config-updater] Handle failed service restarts (#2020)
[debug dump] Missing Dict Key handled in the MatchOptimizer (#2014)
[Auto Techsupport] Added Event Driven TS to Command Reference (#1985)
#### Why I did it
PR9611 - sonic-scheduler.yang pattern issue
#### How I did it
Modified the scheduler name pattern string to accept any string
#### How to verify it
Sonic yang tests
53c630b [CoPP] Add always_enabled field to coppmgr logic ([minigraph]: Add PORTCHANNEL_MEMBER configurations #2034)
adcf69d [cbf] Fix cbf sync error ([aboot] add SWI_DEFAULT support in boot0 #2056)
69f9ee5 fix mclagsyncd out of order initialization ([submodules] update dbsyncd and snmpagent pointers for LLDP MIB support #2112)
#### Why I did it
If the grouping is in the same file in the module, fetching the grouping fails
#### How I did it
fixing the `uses_module_name` when the grouping is under the same file
#### How to verify it
Enabled a grouping under the same file which is `lldp`, there is a test in sonic-yang-mgmt that translates `sample-config-db` into yang format. This test passes with grouping in `lldp` used.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Include sonic-bgp-monitor to setup.py so it gets included in /usr/local/yang-models when installing the package
#### How I did it
#### How to verify it
install the package
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Enable dbgsym package for dhcpmon.
Allow CFLAGS and LDFLAGS from environment variables to be used
in the dhcp6relay build. This makes sure that the -O2 flag from
dpkg-buildflags gets used.
Finally, enable all hardening flags in dpkg-buildflags for
dhcp6relay and dhcpmon. The change from the default set of flags is that
during linking, immediate binding of symbols is done instead of lazy
binding.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
#### How I did it
Added mclag sonic yang file for the MCLAG enhancements as per HLD: Azure/SONiC#596
#### How to verify it
try rest APIs
#### Description for the changelog
Added mclag sonic yang
- Why I did it
For SYSTEM READY feature. Currently, there is a booting stage in system health service to indicate that the system is loading SONiC component. This booting stage is no longer needed because SYSTEM READY feature will treat that stage as system "NOT READY".
- How I did it
1. Remove booting stage
2. Adjust unit test cases
- How to verify it
Manual test, Unit test, sonic-mgmt Regression
Why I did it
the strcpy and buffer allocation is not safe, it corrupts 1 byte on the stack. Depending on the memory layout, it may or may not cause issue immediately.
message type is not validated before updating the counter. Which could cause segment fault.
How I did it
Remove the unsafe strcpy, use config->interface.c_str() instead.
Check message type before updating counters.
How to verify it
The issue (1) caused segment fault on a specific platform. The fix was validated there. Issue (2) was precautionary. Added log in case it triggers.
Why I did it
Minigraph parser added a new field 'cluster' to device_metadata, and then yang validation is blocked.
How I did it
Add 'cluster' to device_metadata yang models.
How to verify it
Run UT for sonc-yang-models.
Use minigraph parser to generate ConfigDB schema and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
* [y_cable] Support for initialization of new Daemon ycable to support
ycables
This PR also adds the commit in sonic-platform-daemons
94fa239 [y_cable] refactor y_cable to a seperate logic and new daemon from xcvrd (#219)
Why I did it
This PR separates the logic of Y-Cable from xcvrd. Before this change we were utilizing xcvrd daemon to control all aspects of Y-Cable right from initialization to processing requests from other entities like orch,linkmgr.
Now we would have another daemon ycabled which will serve this purpose.
Logically everything still remains the same from the perspective of other daemons.
it also take care aspects like init/delete daemon from Y-Cable perspective.
How I did it
To serve the purpose we build a new wheel sonic_ycabled-1.0-py3-none-any.whl and install it inside pmon.
We also initalize the daemon ycabled which serves our purpose for refactor inside pmon
How to verify it
Ran the changes with an image for dualtor tests on a 7050cx3 platform
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Update the sonic-swss submodule. The following are new commits in the submodule:
6cb43ee [p4orch] Fix handlePortStatusChangeNotification status deserialize (#2111)
863f0f1 [azp]: Enable PR diff coverage (#2083)
bf4cd4a Fix the unsafe usage of strncpy in portsorch.cpp (#2110)
c1b4b40 support port isolation group in BFN platform (#1940)
Signed-off-by: Andriy Kokhan <andriyx.kokhan@intel.com>
#### Why I did it
src\tacacs\bash_tacplus\debian\rules file mode is 644, and debian build will change it to 755, which will cause image version contains 'dirty'
#### How I did it
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### How to verify it
Check the image version not contains dirty
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [*] 202111
#### Description for the changelog
Change src\tacacs\bash_tacplus\debian\rules file mode to 755
#### A picture of a cute animal (not mandatory but encouraged)
Why I did it
ACL have ACCEPT action indeed, but yang doesn't support it.
How I did it
Add 'ACCEPT' enum to sonic-types.yang.j2
How to verify it
Run the YANG model unit tests
Why I did it
ConfigDB schema generated by minigraph parser can't pass yang validation.
How I did it
Modify minigraph.py, and use 'state' to replace 'status'.
How to verify it
Run UT for sonic-config-engine.
Use minigraph parser to generate ConfigDB schema, and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
end2end test is blocked by Yang model for BGP monitor.
How I did it
Create new yang files for BGP monitor, and add UT.
How to verify it
Follow the steps in #9711.
Run UT for sonic-yang-models.
Signed-off-by: Gang Lv ganglv@microsoft.com
c4127c2 [psud] Fix PSU log issue (#235)
07542cb [pmon][xcvrd]xcvrd process show backtrace on the internal port. (#233)
3e432e7 [Y-Cable] Increased unit test coverage of y_cable_helper.py (#229)
7c363f5 [ledd] prevent led crash on recirc port event (#232)
e9ccd82 [sonic-platform-daemons] fix dependency issue on py2 wheels by correcting the path (#234)
2b0acfb [sfp-refactoring] xcvrd: add initial support for CMIS application initialization (#217)
```
d9f3afe [fdbshow] Adding more options for fdbshow and show mac (#1982)
902e14f Revert "Revert "[Barefoot] Added CLI to list/set P4 profile (#1951)"" (#2019)
5cc9dd5 Revert "Revert "[sonic-package-manager] support sonic-cli-gen and packages with YANG model (#1650)" (#1972)" (#1994)
```
As part of this, update the isc-dhcp package to match the Bullseye
version (this fixes some compile errors related to BIND), clean up some
of the build dependencies and runtime dependencies for debian packaging,
and use the default Boost version to compile against instead of
explicitly saying using 1.74.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
* Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
[Submodule update] sonic-swss
c78aa1b81a3a9001669746067ebbe40b4485f71d (HEAD -> master, origin/master, origin/HEAD) OA changes to support Ordered ECMP and DVS test for same. (#2092)
b4b00031378a6ce303b779159e718d6d20790c11 Handling Invalid CRM configuration gracefully (#2109)
d240cb2d356ec17baa464455f37f88ac5dbc441a [Mellanox] '_8lane' not added to Mellanox 5xxx models with 800G (#2090)
8fd6e488d2a3696b9cfe352a9119c86f0f33e6dc [pfcwd] Add vs test infrastructure (#2077)
b96ee5438b8bf08980846ee84ff69e7ba267b0dc [vnetorch] Advertise vnet tunnel routes (#2058)
[submodule update] sonic-sairedis
d5866a3dccfb3bc50853d740d54203b5cae61eed (HEAD -> master, origin/master, origin/HEAD) [vslib]: fix create MACsec SA error (#986)
f36f7ce6236ae97526e15f00e7688ccced7c0454 Added Support for enum query capability of Nexthop Group Type. (#989)
323b89b14995a84bd6539c8a1df00b77d251f99e Support for MACsec statistics (#892)
26a8a1204e873109537c81462ad1457cf38c2f9e Prevent other notification event storms to keep enqueue unchecked and drained all memory that leads to crashing the switch router (#968)
0cb253a42cd0a641b8e0a3c6a4a54e5397dd8c2d Fix object availability conversion (#974)
457e94d51 [macsec_linux]: Fixbug cannot dump the PN due to type error (#42)
f7c073323 Disable P2P module (#41)
7b3b777e2 [ci]: use native arm64 and armhf build pool (#40)
d4e91d66c [sonic_operator]: Increase wait timeout (#39)
43611ef88e [sonic_operators]: Add log in sonic operators (#43)
Signed-off-by: Ze Gan <ganze718@gmail.com>
What I did:-
Enhanced minigraph parser to parse interface name associated with static route nexthop
Why I did:-
One of the use case to support interface name is Chassis Packet. For Chassis Packet we have Static Routes configured to route traffic across line-card. If the FRR programs static route without the interface name then in case if the ip interface that is associated with the nexthop goes down FRR resolves static route nexthop over the default route as we have FRR config ip nht-resolve-via-default which causes undesired behavior. Having interface name with Static Route prevents recursive lookup on default route.
How I verify:
Updated unit-test cases
Manual verification
#### Why I did it
AAA yang model is not up to date.
#### How I did it
Add fallback and trace field, and replace boolean_type
#### How to verify it
Run UT for sonic_yang_models.
Follow the steps from #9710
Why I did it
Config db schema generated by minigraph can’t pass yang validation, bgp_asn must not be None.
How I did it
Update sampe-voq-graph.xml to add bgp_asn.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m tests/sample-voq-graph.xml -p tests/voq-sample-port-config.ini --print-data', and check bgp_asn.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Update the sonic-swss submodule. The following are new commits in the submodule.
6dae6b8 Add initial value for weight in overlay nexthops (#2096)
d3cd402 [p4rt-tests] Bind response consumer to appl_state_db (#2105)
43e54e5 Fix armhf buildimage artifacts not found issue (#2107)
How I did it
Update the swss submodule pointer.
Provide the changes required for supporting the "show-techsupport" command via the SONiC Management Framework front end mechanisms (CLI, REST, and gNOI). The Management Framework functionality implemented by this PR improves on the the capabilities currently provided by the SONiC Click CLI interface via the "show techsupport" command by providing the following additional features:
- User-friendly "help" information describing command syntax details for CLI invocation.
- Ability to invoke the command via REST and gNOI mechanisms.
Unit test results are attached to this PR.
Fixes#9561Fixes#9570Fixes#9563
Partial fix for #9556
#### Why I did it
- Attributes for dual ToR configs lack YANG model support
#### How I did it
- Extend YANG tests to cover dual ToR use cases
- Extend YANG model to cover dual ToR use cases
- Reduce the default log level to warning so only test failures are printed
#### How to verify it
- Run the YANG model unit tests
Why I did it
Add YANG model file for table VLAN_SUB_INTERFACE
How I did it
Add YANG model file sonic-vlan-sub-interface.yang to describe data structure
modify existing unit-test to cover vlan sub interface
How to verify it
Build sonic-yang-models and sonic-yang-mgmt without errors
#### Why I did it
It should be handled by `ConfigDBConnector.typed_to_raw()`.
This is a bug for `sonic-cfggen -m --print-data` only
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {
"NULL": "NULL"
},
"PortChannel0002|Ethernet116": {
"NULL": "NULL"
},
"PortChannel0003|Ethernet120": {
"NULL": "NULL"
},
"PortChannel0004|Ethernet124": {
"NULL": "NULL"
}
},
```
But not appears in `sonic-cfgen -d --print-data`.
```
"PORTCHANNEL_MEMBER": {
"PortChannel0001|Ethernet112": {},
"PortChannel0002|Ethernet116": {},
"PortChannel0003|Ethernet120": {},
"PortChannel0004|Ethernet124": {}
},
```
Tested in a T0 KVM.
On a multi-asic Supervisor card, running commands like
'show interface counter' opens a confid_db connection per
namespace per interface which results in many duplicate connections
exceeding the allowed open file handles. This causes the command to fail.
Caching the connections to prevent duplicate handles.
Why I did it
Config db schema generated by minigraph can’t pass yang validation, portchannel_member has invalid port.
How I did it
Update test minigraph to remove invalid port channel.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check port channel member.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, and there's no 'alias' field in yang model.
Minigraph parser supports 'alias' field for VLAN.
How I did it
Add 'alias' field to sonic-vlan.yang
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m xxx.xml --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated by minigraph can’t pass yang validation, there's no Vlan31 in 'VLAN' table.
How I did it
Update test minigraph to add vlan interface.
How to verify it
Build sonic-yang-models.
Run command 'sonic-cfggen -m tests/fg-ecmp-sample-minigraph.xml -p tests/mellanox-sample-port-config.ini --print-data', and run yang validation.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
Fixes https://github.com/Azure/sonic-utilities/issues/1871
From [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) we call `sonic-yang-mgmt` multiple times in order to check a certain change to ConfigDb is valid or not. It is expected for some changes to be invalid, so always printing errors from `sonic-yang-mgmt` makes the output hard to read.
In this PR, we are adding a way to control if logs should be printed or not.
#### How I did it
- Added `print_log_enabled` flag to sonic_yang ctor
- Converted all `print` statements to `sysLog(..., doPrint=True)`
#### How to verify it
unit-test passing means the change did not break logs.
#### Info about libyang logging
libyang provides an extensive logging logic which can support a lot of scenarios:
- ly_log_level: setting logging level
- LY_LLERR
- LY_LLWRN
- ...
- ly_set_log_clb: setting log callback to customize the default behavior which is printing the msgs
- ly_log_options: setting logging options
- LY_LOLOG: If callback is set use it, otherwise just print. If flag is not set, do nothing.
- ...
For more info refer to:
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__logopts.html#gaff80501597ed76344a679be2b90a1d0a
- https://netopeer.liberouter.org/doc/libyang/devel/html/group__log.html#gac88b78694dfe9efe0450a69603f7eceb
#### What's next?
Consume the new flag `print_log_enabled` in [generic-config-updater](https://github.com/Azure/sonic-utilities/tree/master/generic_config_updater) to reduce the logging clutter.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
Updating ztp submodule to include the below commits
f7dd3c5 [sonic-ztp]Fixing build failure after bullseye integration (#30)
9218e16 Replace swsssdk.ConfigDBConnector and SonicV2Connector with swsscommon(#28)
Signed-off-by: Sudharsan Dhamal Gopalarathnam <sudharsand@nvidia.com>
691c37b7 [Route bulk] Fix bugs in case a SET operation follows a DEL operation in the same bulk (Azure/sonic-swss#2086)
a4c80c3d patch for issue Azure/sonic-swss#1971 - enable Rx Drop handling for cisco-8000 (Azure/sonic-swss#2041)
71751d10 [macsec] Support setting IPG by gearbox_config.json (Azure/sonic-swss#2051)
5d5c1692 [bulk mode] Fix bulk conflict when in case there are both remove and set operations (Azure/sonic-swss#2071)
8bbdbd2b Fix SRV6 NHOP CRM object type (Azure/sonic-swss#2072)
ef5b35f3 [vstest] VS test failure fix after fabric port orch PR merge (Azure/sonic-swss#1811)
89ea5385 Supply the missing ingress/egress port profile list in document (Azure/sonic-swss#2064)
81234373 [pfc_detect] fix RedisReply errors (Azure/sonic-swss#2040)
b38f527a [swss][CRM][MPLS] MPLS CRM Nexthop - switch back to using SAI OBJECT rather than SWITCH OBJECT
ae061e55 create debug_shell_enable config to enable debug shell (Azure/sonic-swss#2060)
45e446d9 [cbf] Fix max FC value (Azure/sonic-swss#2049)
b1b5b297 Initial p4orch pytest code. (Azure/sonic-swss#2054)
d352d5a9 Update default route status to state DB (Azure/sonic-swss#2009)
24a64d65 Orchagent: Integrate P4Orch (Azure/sonic-swss#2029)
15a3b6ca Delete the IPv6 link-local Neighbor when ipv6 link-local mode is disabled (Azure/sonic-swss#1897)
ed783e1f [orchagent] Add trap flow counter support (Azure/sonic-swss#1951)
e9b05a31 [vnetorch] ECMP for vnet tunnel routes with endpoint health monitor (Azure/sonic-swss#1955)
bcb7d61a P4Orch: inital add of source (Azure/sonic-swss#1997)
f6f6f867 [mclaglink] fix acl out ports (Azure/sonic-swss#2026)
fd887bf8 [Reclaim buffer] Reclaim unused buffer for dynamic buffer model (Azure/sonic-swss#1910)
92589789 [orchagent, cfgmgr] Add response publisher and state recording (Azure/sonic-swss#1992)
3d862a72 Fixing subport vs test script for subport under VNET (Azure/sonic-swss#2048)
fb0a5fd8 Don't handle buffer pool watermark during warm reboot reconciling (Azure/sonic-swss#1987)
16d4bcdb Routed subinterface enhancements (Azure/sonic-swss#1907)
9639db78 [vstest/subintf] Add vs test to validate sub interface ingress to a vnet (Azure/sonic-swss#1642)
Signed-off-by: Stephen Sun stephens@nvidia.com
- Why I did it
The feature state can be a jinja template, like in this file - https://github.com/Azure/sonic-buildimage/blob/master/files/build_templates/init_cfg.json.j2#L39.
Without this change it is not possible to validate a configuration file.
- How I did it
Relaxes the constraint on feature state. Feature state leaf can be any string.
- How to verify it
Run UT.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it
'SYSLOG_SERVER': {'': {}, '10.0.10.5': {}, '10.0.10.6': {}},
Config db schema generated by minigraph can’t pass yang validation, server address can't be empty.
How I did it
Update test minigraph to remove wrong configuration.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and SYSLOG_SERVERS table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update test minigraph to fix interface
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check interface table and port table.
Signed-off-by: Gang Lv ganglv@microsoft.com
Why I did it
Config db schema generated from test minigraph can't pass yang validation.
How I did it
Update minigraph xml to add DeploymentId.
How to verify it
Build sonic-config-engine.
Run command 'sonic-cfggen -m xxx.xml --print-data', and check deployment_id field.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### Why I did it
POLL_INTERVAL cannot be set if any of the detection/restoration times in this table is less than the POLL_INTERVAL.
#### How I did it
Add "must" constraint to make sure detection/restoration times are greater than POLL_INTERVAL.
#### How to verify it
Use apply-patch command to update POLL_INTERVAL.
Build sonic-yang-model.
Closes#7958
#### Why I did it
The previous implementation of sonic-cfggen did a simple comparison between default breakout mode in
hwsku.json and supported modes in platform.json. To set a different default speed in hwsku.json
it was required to add one more entry to supported modes in platfrom.json file:
1x10G[100G,50G] vs 1x100G[50G,10G]
The new implementation does more intelligent parsing and analysis of supported and default modes. It
allows changing default speed without adding a new entry to platform.json.
#### How I did it
Add more intelligent parsing and analysis of supported and default modes.
#### How to verify it
Run sonic-config-engine unit tests from sonic-config-engine/tests directory
#### Why I did it
Sonic yang model for BUM storm control
#### How I did it
Added yang model and the corresponding test cases.
#### How to verify it
yang model test case for storm control
<!--
Please make sure you've read and understood our contributing guidelines:
https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md
** Make sure all your commits include a signature generated with `git commit -s` **
If this is a bug fix, make sure your description includes "fixes #xxxx", or
"closes #xxxx" or "resolves #xxxx"
Please provide the following information:
-->
#### Why I did it
1. Fix auditd log file path, because known issue: https://github.com/Azure/sonic-buildimage/issues/9548
2. When SONiC change to based on bullseye, auditd version upgrade from 2.8.4 to 3.0.2, and in auditd 3.0.2 the plugin file path changed to /etc/audit/plugins.d, however the upstream auditisp-tacplus project not follow-up this change, it still install plugin config file to /etc/audit/audisp.d. so the plugin can't be launch correctly, the code change in src/tacacs/audisp/patches/0001-Porting-to-sonic.patch fix this issue.
#### How I did it
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### How to verify it
Pass all UT, also run per-command acccounting UT to validate plugin loaded.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
Fix tacacs plugin config file path.
Create /var/log/audit folder for auditd.
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Fix issue https://github.com/Azure/sonic-utilities/issues/1962
The problem is current implementation of [sonic-yang-mgmt::find_data_dependencies](f2774b635d/src/sonic-yang-mgmt/sonic_yang.py (L518)) does not get referrers if they are using `must` statement, it has to use `leafref`.
For now we can convert `must` to `leafref` if possible. In the future we will investigate get referrers by `must` statements as well https://github.com/Azure/sonic-buildimage/issues/9534
#### How I did it
Instead of `must` use `leafref`
#### How to verify it
unit-test
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
[LLDPD] fix to port remove and immediately create a problem - on delete link events it will immediately execute delete without using aggregate events mechanism.
This patch was added to LLDPD on this PR:
lldpd/lldpd#492
Signed-off-by: tomeri <tomeri@nvidia.com>
What I did:
Updated Jinja Template to enable BGP Graceful Restart based on device role. By default it will be enable only if the device role type is TorRouter.
Why I did:-
By default FRR is configured in Graceful Helper mode. Graceful Restart is needed on T0/TorRouter only since the device can go for warm-reboot. For T1/LeafRouter it need to be in Helper mode only
This interface type is used for recirculation on chassis.
The definition is required to prevent this interface from being
considered a physical interface in sonic-platform-common and
sonic-platform-daemon
Fixes#9326
#### Why I did it
When we try execute DPB from CLI we have error:
`libyang[0]: Invalid value "False" in "has_global_scope" element. (path: /sonic-feature:sonic-feature/FEATURE/FEATURE_LIST[name='bgp']/has_global_scope)`
The reason for this issue is that has_global_scope and other have been stored in redis database with value False or True form capital letter:
```
"FEATURE":{
"bgp":{
"auto_restart":"enabled",
"has_global_scope":"False",
"has_per_asic_scope":"True",
"has_timer":"False",
"high_mem_alert":"disabled",
"state":"enabled"
}
```
But yang model support boolean just in lowercase letters (https://datatracker.ietf.org/doc/html/rfc6020#section-9.5.1).
#### How I did it
Added boolean to sonic-types as typedef with different literal cases.
#### How to verify it
Run the command config interface breakout <breakout_mode>
**NOTE:**
To verify this fix, the following PRs that fix other problems in SONiC must be merged into master:
1) Azure/sonic-buildimage/pull/9075
2) Azure/sonic-buildimage/pull/9276
Signed-off-by: Neetha John <nejo@microsoft.com>
Bring back the changes in #9226 that were reverted. Unable to do a revert-revert.
Why I did it
Few device types were missing in the DEVICE_METADATA type field
How I did it
Added missing device types to the device metadata yang
#### Why I did it
Fixing issue #9294
#### How I did it
Updating ACL yang model
#### How to verify it
Validating issue with `config patch-apply` is fixed.
- Start a KVM
- Add file `add-ctrl-plane-tbl.json-patch ` with content:
```json
[
{
"op": "add",
"path": "/ACL_TABLE/ACTRLPLANETABLE",
"value": {
"policy_desc": "ACTRLPLANETABLE",
"services": [
"SSH"
],
"stage": "ingress",
"type": "CTRLPLANE"
}
}
]
```
- Run `sudo config apply-patch add-ctrl-plane-tbl.json-patch`
Before:
```
Patch Applier: The patch was sorted into 4 changes:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"type": "CTRLPLANE"}}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/policy_desc", "value": "ACTRLPLANETABLE"}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/services", "value": ["SSH"]}]
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE/stage", "value": "ingress"}]
```
After:
```
Patch Applier: The patch was sorted into 1 change:
Patch Applier: * [{"op": "add", "path": "/ACL_TABLE/ACTRLPLANETABLE", "value": {"policy_desc": "ACTRLPLANETABLE", "services": ["SSH"], "stage": "ingress", "type": "CTRLPLANE"}}]
```
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
Add the configuration for the set_owner in the `feature` yang model
#### How I did it
Add new leaf `set_pwner` to the `feature` yang model
#### How to verify it
compile `sonic_yang_mgmt-1.0-py3-none-any.whl`
#### Why I did it
Currently only IP ACL and related model is defined. Support for MAC ACL is missing. Added support for it.
#### How I did it
ACL_RULE table is added with new MAC ACL related fields namely Source MAC, Destination MAC, Ethertype (Pattern updated to match any valid Ethertypes), VLAN, PCP, DEI
#### How to verify it
Yang model tests are attached.
Why I did it
Add YANG model support for table CABLE_LENGTH
How I did it
Add the YANG model file
Add the test description file and config file
add list CABLE_LENGTH_LIST to the qos_maps_model list in sonic-yang-ext, as it has an inner list.
How to verify it
Build sonic-yang-model and sonic-yang-mgmt
- Why I did it
Fix sonic-config-engine unit test failure
- How I did it
* Do not use pytest fixture in the test since it is not compatible with unittest framework which is used by all of the rest test cases.
* Supply 2 missing files
- How to verify it
Run unit test or compile the module (when the unit test will run automatically)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Why I did it
#9122
DEVICE_METADATA does not have cloudtype and region.
How I did it
Add cloudtype and region to DEVICE_METADATA.
How to verify it
Follow the steps in #9122.
Build sonic-yang-model.
Signed-off-by: Gang Lv ganglv@microsoft.com
#### What I did
[sonic-linkmgrd][master] submodule update
6c6151b Fix unstable unit tests (state change handler wasn't invoked) (#8)
2f7dc0a support code diff coverage (#5)
83f0002 Force mux state switch to standby if triggered from Cli (#6)
signed-off-by: Jing Zhang zhangjing@microsoft.com
#### Why I did it
DPB falls due to missing POLL_INTERVAL in sonic-flex_counter yang model.
#### How I did it
Added POLL_INTERVAL leaf to ACL container in sonic-flex_counter yang model.
#### How to verify it
Run the command config interface breakout <interface> <breakout_mode>
**NOTE:**
To verify this fix, a PR ([add set_owner to feature yang](https://github.com/Azure/sonic-buildimage/pull/9075)) that fix another bug in SONiC should be merged to master.
Why I did it
Add yang model for syslog server
How I did it
Add new file sonic-syslog.yang and new files for tests
How to verify it
Compile target/python-wheels/sonic_yang_mgmt-1.0-py3-none-any.whl
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
