Why I did it
The 720DT-48S platform has variants with different chassis names, and these need to all be included in platform_components.json to ensure that sonic-mgmt platform_tests/fwutil/test_fwutil.py::test_fwutil_show passes
How I did it
Updated platform_components.json with the variant names for 720DT-48S.
How to verify it
Ran aforementioned testcase and verified that it passes on the different variants.
Co-authored-by: andywongarista <78833093+andywongarista@users.noreply.github.com>
Why I did it
Docker build has a low rate of hanging up.
It hangs on different steps. So, it looks like a bug in docker daemon.
How I did it
Start a daemon process to scan running time more than 1 hours, and kill the process.
* Enable marvell-armhf saiserver docker
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* fix libsaithriift build env
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* fix thrift 014 dependent issue in armhf
* fix build env
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* [sai_ptf]fix thrift armhf build
in armhf buidl failed as no python command
how
add a checker for different python command, python/python3 and base on result use the right command
verify
container build
* [Thrift_014[armhf]]Fix libboost_unit_test_framework.a not found during build
Why
error happen build thirft in armhf
How
fix this issue, add a soft link for the dependent file
Verify
Build pipeline
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
* add metadata dependence
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
* change build pipeline
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
---------
Signed-off-by: zitingguo-ms <zitingguo@microsoft.com>
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Co-authored-by: richardyu-ms <richard.yu@microsoft.com>
- Why I did it
fixes#12907
When the management interface IP address configuration changes from dynamic to static the DNS configuration (retrieved from the DHCP server) in /etc/resolv.conf remains uncleared. This leads to a DNS configuration pointing to the wrong nameserver. To make the behavior clear DNS configuration received from DHCP should be cleared.
- How I did it
Use resolvconf package for managing DNS configuration. It is capable of tracking the source of DNS configuration and puts the configuration retrieved from the DHCP servers into a separate file. This allows the implementation of DNS configuration cleanup retrieved from DHCP during networking reconfiguration.
- How to verify it
Ensure that the management interface has no static configuration.
Check that /etc/resolv.conf has DNS configuration.
Configure a static IP address on the management interface.
Verify that /etc/resolv.conf has no DNS configuration.
Remove the static IP address from the management interface.
Verify that /etc/resolv.conf has DNS configuration retrieved form DHCP server.
* [Security] Upgrade the openssl version to 1.1.1n-0+deb11u4+fips (#13737)
Why I did it
[Security] Upgrade the openssl version to 1.1.1n-0+deb11u4+fips
f6df7303d8 Update expired certs.
84540b59c1 CVE-2022-2068
f763d8a93e Prepare 1.1.1n-0+deb11u2
576562cebe CVE-2022-1292
How I did it
Upgrade the OpenSSL version
* [Security] Upgrade OpenSSL version for armhf
Why I did it
autoneg is not supported in the previous release 202012 on Nokia-7215 platform. To migrate to the 202205 image with autoneg support, we need to disable the autoneg to allow the link to be up when issue load minigraph. This requires to change the autoneg setting to be off in the port_config.ini file.
How I did it
Modify the port_config.ini to set the autoneg off.
How to verify it
Running the new image, with load mingraph.xml, execute "show int autonet status" should show autoneg disabled
Why I did it
golang lib xmlquery v1.2.1 has critical security issue. MS Component Governance created an alert.
Update submodule HEAD to fix CG alert about CVE-2020-25614
How I did it
sonic-mgmt-framework
a72d9ee Fix CG alert CVE-2020-25614 about xmlquery v1.2.1 (#91)
sonic-telemetrey
727aefd Fix CG alert CVE-2020-25614 about xmlquery v1.2.1 (#107)
Why I did it
[FIPS] Upgrade Open-SymCrypt version to 0.6
Improve the SymCrypt performance
Support to download the debug packages from storage account in version 0.6.
How I did it
Upgrade to symcrypt-openssl from version 0.4 to version 0.6
Changes in https://github.com/sonic-net/sonic-fips:
0c29b23 Upgrade the submodules: SymCrypt and SymCrypt-OpenSSL #40
80022f3 Fix the ARM64 build failure
2e76a3d Disable the unsupported tests
Other changes will be added as well:
55b8e0a Merge pull request #35 from xumia/change-license
120c1a7 Upgrade SymCrypt and SymCrypt-OpenSSL
2f9c084 Merge pull request #39 from liuh-80/dev/liuh/update-openssh-version
a3be6c5 Revert openssh version
e02fa1e Update fips version
How to verify it
Why I did it
Add multi-asic test jobs using TestbedV2 in 202205 branch.
How I did it
1. Add a job in azure-pipelines.yml to add a multi-asic test job using TestbedV2 in 202205 branch.
2. Add a parameter num_asic in .azure-pipelines/run-test-scheduler-template.yml to appiont the specific image version.
Changing the default config knob value to be True for killing radv, due to the reasons below:
Killing RADV is to prevent sending the "cease to be advertising interface" protocol packet.
RFC 4861 says this ceasing packet as "should" instead of "must", considering that it's fatal to not do this.
In active-active scenario, host side might have difficulty distinguish if the "cease to be advertising interface" is for the last interface leaving.
6.2.5. Ceasing To Be an Advertising Interface
shutting down the system.
In such cases, the router SHOULD transmit one or more (but not more
than MAX_FINAL_RTR_ADVERTISEMENTS) final multicast Router
Advertisements on the interface with a Router Lifetime field of zero.
In the case of a router becoming a host, the system SHOULD also
depart from the all-routers IP multicast group on all interfaces on
which the router supports IP multicast (whether or not they had been
advertising interfaces). In addition, the host MUST ensure that
subsequent Neighbor Advertisement messages sent from the interface
have the Router flag set to zero.
sign-off: Jing Zhang zhangjing@microsoft.com
Co-authored-by: Jing Zhang <zhangjing@microsoft.com>
Why I did it
To pick up the below DNX fixes:
CS00012275689: DSCP->TC and TC->QUEUE mappings are not happening for packets received on LAG ports (SONIC-69367)
CS00012277618: Crash in _brcm_sai_dnx_irpp_port_core_get (SONIC-70001)
How I did it
Updated SAI branch with the above fixes
How to verify it
Ran basic sonic-mgmt tests with the SAI debian on XGS and DNX platforms
utilities:
* c63a62b 2023-01-23 | [muxcable][config] Add support to enable/disable ceasing to be an advertisement interface when `radv` service is stopped (#2622) (HEAD -> 202205) [Jing Zhang]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Why I did it
Fix issue caused by dualtor support PR [dhcpmon] Open different socket for dual tor to enable interface filtering #11201
Improve code
How I did it
On single ToR, packets received count was duplicated due to socket filter set to "inbound"
Tx count not increasing due to filter set to "inbound". Added an outbound socket to count tx packets
Added vlan member interface mapping for Ethernet interface to vlan interface lookup in reference to PR Fix multiple vlan issue sonic-dhcp-relay#27
Exit when socket fails to initialize to allow dhcp_relay docker to restart
How to verify it
Tested on vstestbed single tor and dual tor, sent packets and verify printed out dhcpmon rx and tx counters is correct
Correct number of tx increases
Tx does not increase when ToR is on standby
Why I did it
If make fails, we can't rerun the make process, because existing patches can't apply again.
How I did it
Check if patches are applied. if yes, don't apply patches again.
How to verify it
Co-authored-by: Liu Shilong <shilongliu@microsoft.com>
Why I did it
[Seastone] Enhancement fix for PR12200 syseeprom issue.
How I did it
Enhance the fix through replace the hardcoded devnum to bash variable
How to verify it
show platform syseeprom or decode-syseeprom
Co-authored-by: Ikki Zhu <79439153+qnos@users.noreply.github.com>
Why I did it
This PR is to update minigraph.py to support both port alias and port name as input of AttachTo attribute of ACL table.
Before this change, only port alias is supported.
How I did it
Add a global variable to store port names
Search both port names and port alias wheh parsing the value of AttachTo.
How to verify it
Verified by a new unit test case test_minigraph_acl_attach_to_ports
Verified by copying the new minigraph.py to a testbed and run conflg load_minigraph.
utilities:
* 3ebe948 2023-01-14 | [show] Add bgpraw to show run all (#2537) (HEAD -> 202205) [jingwenxie]
* 7979b9b 2022-12-05 | Transceiver eeprom dom CLI modification to show output from TRANSCEIVER_DOM_THRESHOLD table (#2535) [mihirpat1]
swss:
* 4ad82c5 2023-01-13 | Changed the BFD default detect multiplier to 10x (#2614) (HEAD -> 202205) [siqbal1986]
* 4fe7138 2023-01-12 | [MuxOrch] Enabling neighbor when adding in active state (#2601) [Nikola Dancejic]
sairedis:
* 2f6cbd3 2023-01-19 | Fix for [EVPN] When MAC moves from remote end point to local, ASIC DB fields are not updated properly for the mac #11503 (#1173) (github/202205) [anilkpan]
platform-daemon:
* 2851d86 2023-01-17 | Chassisd do an explicit stop of the config_manager (#328) (HEAD -> 202205) [judyjoseph]
platform-common:
* 2995989 2022-12-06 | Add get_transceiver_status and get_transceiver_pm to API interface (#315) (HEAD -> 202205) [longhuan-cisco]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
#### Why I did it
This fixed memory leak in ETHERLIKE-MIB. The fix is not part of net-snmp(5.7.3 version). This PR includes the patch to fix memory leak issue.
```
ke->name in stdup-ed at line 297: n->name = strdup(RTA_DATA(tb[IFLA_IFNAME]));
```
#### How I did it
patched the fix.
[net-snmp] upstream fix link -> [snmpd|upstream link](ed4e48b5fa)
#### How to verify it
**Before The fix**
used valgrind to find memory leak.
```
root@lnos-x1-a-csw06:/# grep "definitely lost" valgrind-out.txt
==493== 4 bytes in 1 blocks are definitely lost in loss record 1 of 333
==493== 16 bytes in 1 blocks are definitely lost in loss record 25 of 333
==493== 757 bytes in 71 blocks are definitely lost in loss record 214 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 293 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 294 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 295 of 333
==493== 1,168 (32 direct, 1,136 indirect) bytes in 1 blocks are definitely lost in loss record 296 of 333
==493== definitely lost: 905 bytes in 77 blocks
```
_we can see the memory leak see in stack trace._
-> dot3stats_linux -> get_nlmsg -> strdup
https://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.chttps://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.c#L277
```
n = malloc(sizeof(*n));
memset(n, 0, sizeof(*n));
n->ifindex = ifi->ifi_index;
n->name = strdup(RTA_DATA(tb[IFLA_IFNAME]));
memcpy(&n->stats, RTA_DATA(tb[IFLA_STATS]), sizeof(n->stats));
n->next = kern_db;
kern_db = n;
return 0;
```
we were not freeing space for EtherLike-MIB.AS interface mib queries were getting increased, we see memory increment.
```
kern_db = ke->next;
free(ke);
```
https://github.com/net-snmp/net-snmp/blob/v5.7.3/agent/mibgroup/etherlike-mib/data_access/dot3stats_linux.c#L467
```
==55== 757 bytes in 71 blocks are definitely lost in loss record 186 of 299
==55== at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==55== by 0x4EB6E49: strdup (strdup.c:42)
==55== by 0x493F278: get_nlmsg (dot3stats_linux.c:299)
==55== by 0x493F529: rtnl_dump_filter_l.constprop.3 (dot3stats_linux.c:370)
==55== by 0x493FD7A: rtnl_dump_filter (dot3stats_linux.c:401)
==55== by 0x493FD7A: _dot3Stats_netlink_get_errorcntrs (dot3stats_linux.c:424)
==55== by 0x494009F: interface_dot3stats_get_errorcounters (dot3stats_linux.c:530)
==55== by 0x48F6FDA: dot3StatsTable_container_load (dot3StatsTable_data_access.c:330)
==55== by 0x485E76B: _cache_load (cache_handler.c:700)
==55== by 0x485FA37: netsnmp_cache_helper_handler (cache_handler.c:638)
==55== by 0x48720BC: netsnmp_call_handler (agent_handler.c:526)
==55== by 0x48720BC: netsnmp_call_next_handler (agent_handler.c:640)
==55== by 0x4865F75: table_helper_handler (table.c:717)
==55== by 0x4871B66: netsnmp_call_handler (agent_handler.c:526)
==55== by 0x4871B66: netsnmp_call_handlers (agent_handler.c:611)
757 bytes in 71 blocks are definitely lost in loss record 214 of 333
==493== at 0x483577F: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==493== by 0x4EB6E49: strdup (strdup.c:42)
==493== by 0x493F278: ??? (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x493F529: ??? (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x493FD7A: _dot3Stats_netlink_get_errorcntrs (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x494009F: interface_dot3stats_get_errorcounters (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x48F6FDA: dot3StatsTable_container_load (in /usr/lib/x86_64-linux-gnu/libnetsnmpmibs.so.30.0.3)
==493== by 0x485E76B: _cache_load (cache_handler.c:700)
==493== by 0x485FA37: netsnmp_cache_helper_handler (cache_handler.c:638)
==493== by 0x48720BC: netsnmp_call_handler (agent_handler.c:526)
==493== by 0x48720BC: netsnmp_call_next_handler (agent_handler.c:640)
==493== by 0x4865F75: table_helper_handler (table.c:717)
==493== by 0x4871B66: netsnmp_call_handler (agent_handler.c:526)
==493== by 0x4871B66: netsnmp_call_handlers (agent_handler.c:611)
```
```
**After The fix**
no memory leak in valgrind stack trace related to etherlike MIB.
```
Why I did it
When getting system mac of centec platform, it would increase by 1 the last byte of mac, but it could not consider the case of carry.
How I did it
Firstly, I would replace the ":" with "" of mac to a string.
And then, I would convert the mac from string to int and increase by 1, at last convert it to string with inserting ":".
add module reboot APIs for chassis
add supervisor module on linecard (fixes show chassis module midplane-status)
improve RTC update mechanism and sync every 10 mins
fix sbtsi temp sensor presence/thresholds
fix Mineral status leds
remove thermal object on xcvrs
misc fixes
