- Why I did it
Added the fwtrace config files in order to be able to call the mlxstrace utility during the show techsupport dump.
Work item tracking
Microsoft ADO (number only):
- How I did it
Added fwtrace config files. Added path to these files to sai.profile for each mlnx device.
- How to verify it
Execute the show techsupport command and check if mlxstrace output is in system dump.
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
= Why I did it
To optimize Mellanox platform SAI build
- How I did it
SAI debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release.
- How to verify it
Configure/build for Mellanox platform, check the image and ensure that correct SAI debs are included.
- Why I did it
The reset cause "reset_from_comex" has been removed by hw-management, hence removing it from platform API code
- How I did it
Remove reset_from_comex from reboot cause mapping
- How to verify it
Manual test
- Why I did it
BIOS on new generation switch can come with a file type of cap or cab. Needs to add support to these file type.
Also ONIE version on new devices can have a suffix of 'dev'.
- How I did it
Added cap & cab as possible component extensions for ComponentBIOS.
Update the ONIE version regex to include dev signed versions.
- How to verify it
Update BIOS.
Why I did it
Sharing the storage of syncd with other proprietary application extensions allows them to communicate with syncd in differnt ways.
If one container wants to pass some information to syncd then shared storage can be used. However, today the shared storage isn't cleaned on restarts making it possible for syncd to read out-of-date information generated in the past.
NOTE: No plans to use it for standard SONIC dockers and we are working on removing the SDK dependency from PMON docker
How I did it
Implemented new service to clean the shared storage.
How to verify it
Do reboot/fast-reboot/warm-reboot/config-reload/systemctl restart swss and verify /tmp/ is cleaned after each restart in syncd container.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
SDK patches for iproute2 were added to SONiC tree as a temporary solution.
Now that SDK with the patches is available, I have removed the patches from SONiC tree and we consume them from SDK github during compilation.
- How I did it
During build we download SDK iproute2 patches from SDK github (or from the URL provided by user if compiling SDK from sources) and apply them before compilation.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
- Why I did it
Adjust the warning threshold implementation according to the latest algorithm update
- How I did it
Modify power warning and critical thresholds methods
- How to verify it
Unit test updated to cover the change
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Add the patchwork link to the commit description for non-upstream patches if present
- How I did it
Parse the patchwork/<patch_name>.txt file from hw-mgmt
- Why I did it
Bug fix:
- * I2C bus is stuck - Unable to probe I2C bus 2-0048, which causes /var/run/hw-management/config/sfp_counter, module_counter to be zero and pmon docker unable to start.
- How I did it
Update HW-MGMT package version in the make file
Update HW-MGMT submodule pointer
-How to verify it
Run full sonic-mgmt regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
Facilitate Automatic integration of sdk kernel patches into SONiC.
**Inputs to the Script:**
1) `MLNX_SDK_VERSION` Eg: `4.5.4206`
2) `MLNX_SDK_ISSU_VERSION` Eg: `101`
**Note: If nothing is provided the one already present in the sdk.mk file is used**
3) `MLNX_SDK_SOURCE_BASE_URL:`
**Note: If nothing is provided the upstream sdk drivers url is used**
4) `CREATE_BRANCH: (y|n)` Creates a branch instead of a commit (optional, default: n)
5) `BRANCH_SONIC`: Only relevant when CREATE_BRANCH is y. `Default: master`.
Note: These should be provided through `SONIC_OVERRIDE_BUILD_VARS ` parameter
**Output:**
1) Script creates a commit in sonic-linux-kernel with any updates to sdk-kernel patches in sonic in accordance with the version provided by `MLNX_SDK_VERSION`
**Note: Script Doesn't commit anything to linux-kernel when there aren't any changes required..**
#### How I did it
1) Added a new make target which can be invoked by calling `make integrate-mlnx-sdk`
```
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6f38dca_integrate_4.5.4206
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 1
d64d1e7 (HEAD -> master_6f38dca_integrate_4.5.4206) Intgerate MLNX SDK 4.5.4206 Kernel Patches
```
Changes made will be summarized under `sonic-buildimage/integrate-mlnx-sdk_user.out` file. Debugging and troubleshooting output is written to `sonic-buildimage/integrate-mlnx-sdk.log` files
[log_files.zip](https://github.com/sonic-net/sonic-buildimage/files/11226441/log_files.zip)
#### Limitations:
1) Assumes that the sdk kernel patches are always upstreamed
#### How to verify it
Build the Kernel and test
Why I did it
Align with SAI headers v1.12.0
Work item tracking
Microsoft ADO (number only):
How I did it
Update Mellanox SAI submodule
How to verify it
Compile SONiC image
- Why I did it
The current implementation of SFP reset, LPM, present relies on SDK API. This PR moves the implementation to SDK sysfs. By this PR, it gains following benefit:
1. SDK sysfs provides better performance.
2. Host side and container side share the same code.
3. Code is much cleaner.
- How I did it
Use SDK sysfs to implement SFP reset, LPM, present.
- How to verify it
1. Manual test.
2. Unit test.
SDK/FW Fixed Issues:
• When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work.
• When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value
• After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
• Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set
• If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail.
• In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed
• When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources
• When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck
• SN2201 Module 1 is considered to be present/linked while no cable/module is plugged
• On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes
SAI New features:
• ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets.
• PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event.
• Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario.
• Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario.
SAI Fixed issues:
• When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it
• When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
As a LED indicator to help user to find switch location in the lab, UID LED is a useful LED in Mellanox switch.
- How I did it
I add a new member _led_uid in Mellanox/Chassis.py, and extend Mellanox/led.py to support blue color.
Relevant platform-common PR sonic-net/sonic-platform-common#369
- How to verify it
Add unit test cases in test.py, and do manual test including turn-on/off/show uid led.
Signed-off-by: David Xia <daxia@nvidia.com>
- Why I did it
Add the commit-id patch map in the commit message.
- How I did it
By parsing the patch DB from hw-mgmt
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Currently, LED sysfs path is hardcoded. We will need change LED code if new LED color is supported for new platforms. This PR is aimed to improve this. By this PR, LED sysfs path is deduced from LED capability file.
- How I did it
Improve LED management on Nvidia platform:
get LED capability from capability file and deduce sysfs name according to the capability
- How to verify it
Unit test
Manual test
- Why I did it
To improve ASAN backtrace output when the call stack contains a code that is not compiled with -fno-omit-frame-pointer.
- How I did it
Added fast_unwind_on_malloc=0 to the ASAN_OPTIONS
- How to verify it
Build and test docker-syncd-mlnx.gz with ENABLE_ASAN=y
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Add NVIDIA Copyright header to NVIDIA files added lately
- How I did it
Add NVIDIA Copyright header for the relevant files
- How to verify it
N/A (only commented text was added).
- Why I did it
Mellanox syncd container will be based on Debian iproute2 plus patches instead of Nvidia internal version of iproute2
- How I did it
Download iproute2 from Debian repository, apply patches and compile to create a new target.
The target is then deployed in syncd container of Mellanox switches only.
The new target is called IPROUTE2_MLNX.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
- Why I did it
Facilitate Automatic integration of new hw-mgmt version into SONiC.
Inputs to the Script:
MLNX_HW_MANAGEMENT_VERSION Eg: 7.0040.5202
CREATE_BRANCH: (y|n) Creates a branch instead of a commit (optional, default: n)
BRANCH_SONIC: Only relevant when CREATE_BRANCH is y. Default: master.
Note: These should be provided through SONIC_OVERRIDE_BUILD_VARS parameter
Output:
Script creates a commit (in each of sonic-buildimage, sonic-linux-kernel) with all the changes required for upgrading the hw-management version to a version provided by MLNX_HW_MANAGEMENT_VERSION
Brief Summary of the changes made:
MLNX_HW_MANAGEMENT_VERSION flag in the hw-management.mk file
hw-mgmt submodule is updated to the corresponding version
Updates are made to non-upstream-patches/patches and series.patch file
series, kconfig-inclusion and kconfig-exclusion files can be updated in the sonic-linux-kernel repo
sonic-linux-kernel/patches folder is updated with the corresponding upstream patches
Based on the inputs, there could be a branch seen in the local for each of the repo's. Branch is named as <branch>_<parent_commit>_integrate_<hw_mgmt_version>
- How I did it
Added a new make target which can be invoked by calling make integrate-mlnx-hw-mgmt
user@server:/sonic-buildimage$ git rev-parse --abbrev-ref HEAD
master_23193446a_integrate_7.0020.5052
user@server:/sonic-buildimage$ git log --oneline -n 2
f66e01867 (HEAD -> master_23193446a_integrate_V.7.0020.5052, show) Intgerate HW-MGMT V.7.0020.5052 Changes
23193446a (master_intg_hw_mgmt) Update logic
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6847319_integrate_7.0020.4104
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 2
6094f71 (HEAD -> master_6847319_integrate_V.7.0020.5052) Intgerate HW-MGMT V.7.0020.5052 Changes
6847319 (origin/master, origin/HEAD) Read ID register for optoe1 to find pageable bit in optoe driver (#308)
Changes made will be summarized under sonic-buildimage/integrate-mlnx-hw-mgmt_user.out file. Debugging and troubleshooting output is written to sonic-buildimage/integrate-mlnx-hw-mgmt.log files
User output file & stdout file:
log_files.tar.gz
Limitations:
Assumes the changes would only work for amd64
Assumes the non-upstream patches in mellanox only belong to hw-mgmt
- How to verify it
Build the Kernel
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Currently, non upstream patches are applied only after upstream patches.
Depends on sonic-net/sonic-linux-kernel#313. Can be merged in any order, preferably together
- What I did it
Non upstream Patches that reside in the sonic repo will not be saved in a tar file bur rather in a folder pointed out by EXTERNAL_KERNEL_PATCH_LOC. This is to make changes to the non upstream patches easily traceable.
The build variable name is also updated to INCLUDE_EXTERNAL_PATCHES
Files/folders expected under EXTERNAL_KERNEL_PATCH_LOC
EXTERNAL_KERNEL_PATCH_LOC/
├──── patches/
├── 0001-xxxxx.patch
├── 0001-yyyyyyyy.patch
├── .............
├──── series.patch
series.patch should contain a diff that is applied on the sonic-linux-kernel/patch/series file. The diff should include all the non-upstream patches.
How to verify it
Build the Kernel and verified if all the patches are applied properly
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Sometimes Nvidia watchdog device isn't ready when watchdog-control service is up after first installation from ONIE
need to delay watchdog control service to go up after hw-mgmt which gets devices up and ready
- How I did it
Delay Nvidia watchdog-control service before hw-mgmt has started on Mellanox platform in order to avoid missing or not ready watchdog device.
- How to verify it
verification test of ONIE installation of image in a loop
making sure watchdog service is always up (not failed) after first installation from ONIE
- Why I did it
To include latest fixes:
Fix traffic loss on all routed traffic when moving from 4.4.3372/XX_2008_3388 to 4.5.4118-012/XX_2010_4120-010. Issue occurred after ISSU process in Spectrum 1 only, When upgrading from older version to a new one. Neighbor entries are overwritten.
Fix When using mirror session policer on SPC2/3, the actual CIR was 1.28 times more than the configured CIR value.
Fix Creation of router interface of type bridge may occasionally fail if create is performed immediately after delete.
Fix False errors during SDK deinitialization may be seen in the syslog
- How I did it
Updated SDK submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
- Why I did it
In sfplpm API, the number of logical ports is hardcoded as 64. When a system contains more port than this, the SDK APIs would fail with a syslog as below
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [MGMT_LIB.ERR] Slot [0] Module [0] has logport [0x00010069] in enabled state
Mar 7 03:53:58.105980 r-leopard-58 ERR syncd#SDK: [SDK_MGMT_LIB.ERR] Failed in __sdk_mgmt_phy_module_pwr_attr_set, error: Internal Error
Mar 7 03:53:58.106118 r-leopard-58 ERR pmon#-c: Error occurred when setting power mode for SFP module 0, slot 0, error code 1
- How I did it
Remove the hardcoded value of 64. Obtained the number of logical ports from SDK
- How to verify it
Manual testing
Fixes#13568
Upgrade from old image always requires squashfs mount to get the next image FW binary. This can be avoided if we put FW binary under platform directory which is easily accessible after installation:
admin@r-spider-05:~$ ls /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
/host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
admin@r-spider-05:~$ ls -al /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa
lrwxrwxrwx 1 root root 66 Feb 8 17:57 /tmp/image-fw-new-loc.0-dirty-20230208.193534-fs/etc/mlnx/fw-SPC.mfa -> /host/image-fw-new-loc.0-dirty-20230208.193534/platform/fw-SPC.mfa
- Why I did it
202211 and above uses different squashfs compression type that 201911 kernel can not handle. Therefore, we avoid mounting squashfs altogether with this change.
- How I did it
Place FW binary under /host/image-/platform/mlnx/, soft links in /etc/mlnx are created to avoid breaking existing scripts/automation.
/etc/mlnx/fw-SPCX.mfa is a soft link always pointing to the FW that should be used in current image
mlnx-fw-upgrade.sh is updated to prefer /host/image-/platform/mlnx location and fallback to /etc/mlnx in squashfs in case new location does not exist. This is necessary to do image downgrade.
- How to verify it
Upgrade from 201911 to master
master to 201911 downgrade
master -> master reboot
ONIE -> master boot (First FW burn)
Which release branch to backport (provide reason below if selected)
- Why I did it
To optimize Mellanox platform build
- How I did it
sdk debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release
sx kernel is downloaded as zip from Spectrum-SDK-Drivers
- How to verify it
configure/build for Mellanox platform
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
FW for Spectrum-4 ASIC not yet available
- How I did it
Remove in Mellanox fw make files to Spectrum-4 ASIC firmware binaries.
Remove from firmware upgrade scripts to be able Spectrum-4 ASIC.
- How to verify it
Run regression test
- Why I did it
On Mellanox platform, system EEPROM is a soft link provided by hw-management. There is chance that config-setup service accessing the EEPROM before hw-management creating it. It causes errors. The PR is aim to fix it.
- How I did it
Waiting EEPROM creation in platform API up to 10 seconds.
- How to verify it
Manual test
- Why I did it
Add support for systems 4600/4600C/2201 that are using sonic interface names aligned to 4 instead of 8 (which is the max number of lanes per port).
Improve DB access calls, now we use Python library functions.
- How I did it
Use addition information taken from Config DB in order to create map from SDK logical index to sonic interface name.
- How to verify it
Run ECMP calculator on 4600, 4600C and 2201 platforms.
- Why I did it
sfp_event.py gets a PMPE message when a cable event is available. In PMPE message, there is no label port available. Current sfp_event.py is using sx_api_port_device_get to get 64 logical ports attributes, and find the label port from those 64 attributes. However, if there are more than 64 ports, sfp_event.py might not be able to find the label port and drop the PMPE message.
- How I did it
Don't use hardcoded 64, get logical port number instead.
- How to verify it
Manual test
- Why I did it
Add PYTHON3_SWSSCOMMON as build time dependency to Mellanox platform API to avoid issue like:
19:34:11 ImportError while loading conftest '/sonic/platform/mellanox/mlnx-platform-api/tests/conftest.py'.
19:34:11 tests/conftest.py:28: in <module>
19:34:11 from sonic_platform import utils
19:34:11 sonic_platform/__init__.py:18: in <module>
19:34:11 from sonic_platform import *
19:34:11 sonic_platform/platform.py:28: in <module>
19:34:11 raise ImportError(str(e) + "- required module not found")
19:34:11 E ImportError: No module named 'swsscommon'- required module not found- required module not found
19:34:11 [ FAIL LOG END ] [ target/python-wheels/bullseye/mlnx_platform_api-1.0-py3-none-any.whl ]
The issue only happens when calling below command:
make target/python-wheels/bullseye/mlnx_platform_api-1.0-py3-none-any.whl
- How I did it
Add PYTHON3_SWSSCOMMON as build time dependency to Mellanox platform API
- How to verify it
Run build
- Why I did it
Add non-upstream kernel patches for the Nvidia platforms
These patches are not yet upstream but needed for new technology.
A flow to upstream them is in progress and once they will be approved they will be moved officially to sonic-linux-kernel.
Till then to include them in the build (not must) the build option INCLUDE_EXTERNAL_PATCH_TAR=y should be included
- How I did it
Zip all the patches in to a tar.gz tarball.
- How to verify it
Manually test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Currently, when building MFT, it can only download the source code from the official download site: http://www.mellanox.com/downloads/MFT/, it's not possible to integrate an internal version that has not been officially released yet.
The intention of this PR is to make it possible to download the source code from any valid link.
- How I did it
Add a new parameter "MLNX_MFT_INTERNAL_SOURCE_BASE_URL", if an URL is given, it will download the source code from the given URL, otherwise, it downloads from the default official site.
- How to verify it
Specify a valid URL in the make file, the MFT debs should be built successfully.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Support per PSU slope value for PSU power threshold according to hardware team requirement
- How I did it
Pass the PSU number as a parameter when fetching the slope value of PSU.
- How to verify it
Running regression and manual test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Commit sonic-net/sonic-platform-daemons@153ea47 changed SfpStateUpdateTask from Process to Thread. In this commit, it raises an exception in SfpStateUpdateTask to make shutdown flow fast. But it does not work on Nvidia platform as Nvidia platform is passing timeout parameter of get_change_event to select. Linux select function can not be interrupted by a Python exception. There is no such issue on Nvidia platform before that commit. However, in order to comply with the commit and make shutdown flow fast, we decided to change Nvidia platform API implementation.
To fix issue #13591.
- How I did it
The select call in get_change_event should use no more than 1 second as timeout parameter.
Outside the select call, add a while loop to make sure timeout parameter of get_change_event work as expected
- How to verify it
Manual test
- Why I did it
Advance hw-mgmt service to V.7.0020.4100
Add missing thermal sensors that are supported by hw-mgmt package
Delay system health service before hw-mgmt has started on Mellanox platform in order to avoid reading some sensors before ready.
Depends on sonic-net/sonic-linux-kernel#305
- How I did it
1. Update hw mgmt version
2. Add missing sensors
3. Delay service
- How to verify it
Regression test.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Added platform specific script to be invoked during SAI failure dump. Added some generic changes to mount /var/log/sai_failure_dump as read write in the syncd docker
- How I did it
Added script in docker-syncd of mellanox and copied it to /usr/bin
- How to verify it
Manual UT and new sonic-mgmt tests
- Why I did it
To include latest fixes and new functionality
SDK/FW
1. Fixed bug in recovery mechanism in case of I2C error when trying to access the XSFP module.
2. On the NVIDIA Spectrum-2 switch, when receiving a packet with Symbol Errors on ports that are configured to cut-thought mode, a pipeline might get stuck.
3. On the Spectrum-2 and Spectrum-3 switch, if you enable ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
4. Modifying existing entry/Adding new one when switch is at its maximum capacity (full by maximum allowed entries from any type such as routes, FDB, and so forth), will fail with an error.
5. When many ports are active (e.g., 70 ports up), and the configuration of shared buffer is applied on the fly, occasionally, the firmware might get stuck.
6. When a system has more than 256 ACL rules, on rare occasion, removing/adding rules may cause some ACL rules not to work.
7. On SN2201 system, on RJ45 port, the link might appear in 'down' state even if it operations properly.
8. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event.
9. When setting LAG as a SPAN analyzer, the distributor mode of the LAG members was not taken into account. It may happen that the LAG member with distributor mode disabled will be set as a SPAN analyzer port.
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
To improve ASIC FW upgrade logging and have information about the cause of FW update failure in the log.
- How I did it
Added syslog logger support
In case the FW update has failed the update tool will give the cause of the failure in the output in the last line, starting with "Fail".
When running the tool, in case of a failed update, we will parse the output to retrieve the cause and log it.
Device #1:
----------
Device Type: ConnectX6DX
Part Number: MCX623106AN-CDA_Ax
Description: ConnectX-6 Dx EN adapter card; 100GbE; Dual-port QSFP56; PCIe 4.0/3.0 x16;
PSID: MT_0000000359
PCI Device Name: /dev/mst/mt4125_pciconf0
Base GUID: 0c42a103007d22d4
Base MAC: 0c42a17d22d4
Versions: Current Available
FW 22.32.0498 22.32.0498
PXE 3.6.0500 3.6.0500
UEFI 14.25.0015 14.25.0015
Status: Forced update required
---------
Found 1 device(s) requiring firmware update...
Device #1: Updating FW ...
FSMST_INITIALIZE - OK
Writing Boot image component - OK
Fail : The Digest in the signature is wrong
- How to verify it
mlnx-fw-upgrade.sh --upgrade
Add script usage and more information to script description being printed in help option.
- Why I did it
Missing information in script description in help option.
- How I did it
Expand script description and add script usage.
- How to verify it
Run the script with -h option.
- Why I did it
In case of warm/fast reboot, the hardware reboot cause will NOT be cleared because CPLD will not be touched in this flow. To not confuse the reboot cause determine logic, the leftover hardware reboot cause shall be skipped by the platform API, platform API will return the 'REBOOT_CAUSE_NON_HARDWARE' instead of the "hardware" reboot cause.
- How I did it
Check the proc cmdline to see whether the last reboot is a warm or fast reboot, if yes skip checking the leftover hardware reboot cause.
- How to verify it
a. Manual test:
- Perform a power loss
- Perform a warm/fast reboot
- Check the reboot cause should be "warm-reboot" or "fast-reboot" instead of "power loss"
b. Run reboot cause related regression test.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Support syslog rate limit configuration feature
- How I did it
Remove unused rsyslog.conf from containers
Modify docker startup script to generate rsyslog.conf from template files
Add metadata/init data for syslog rate limit configuration
- How to verify it
Manual test
New sonic-mgmt regression cases
- Why I did it
In order to prevent the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py test failing on the log analyzer step.
The mentioned test is performing the sfputil reset EthernetX for every interface on the SONiC switch, this action will flap the SFP device status (INSTERTED -> REMOVED -> INSTERTED).
The SONiC XCVRD daemon will catch this SFP device status change (because it is monitoring the presence status of the cable).
To judge the cable presence status, currently, we are still leveraging to read the first bytes of the EEPROM, and the EEPROM could be not ready at some moment and the SONiC XCVRD daemon will print the error log to Syslog:
ERR pmon#xcvrd: Error! Unable to read data for 'xx' port, page 'xx' offset 128, rc = 1, err msg: Sending access register
- How I did it
Change logging severity from ERR to WARNING
- How to verify it
Run the sonic-mgmt/tests/platform_tests/sfp/test_sfputil.py
OR much faster way to run the next script on the switch:
#!/bin/bash
START=0
END=248
for (( intf=$START; intf<=$END; intf+=8))
do
sfputil reset Ethernet"${intf}"
done
sfputil show presence
- Why I did it
Following code to judge whether a process is running inside a docker could get stuck on the simx platform
subprocess.Popen(["docker", "--version"],
stdout=subprocess.PIPE,
stderr=subprocess.STDOUT,
universal_newlines=True)
When it gets stuck, the config-chassisdb service can not be successfully started, thus the system can not be booted up.
root@sonic:/# service config-chassisdb status
config-chassisdb.service - Config chassis_db
Loaded: loaded (/lib/systemd/system/config-chassisdb.service; enabled; vendor preset: enabled)
Active: activating (start) since Thu 2022-12-15 09:23:02 UTC; 29min ago
Main PID: 571 (config-chassisd)
Tasks: 14 (limit: 9501)
Memory: 132.4M
CGroup: /system.slice/config-chassisdb.service
├─571 /bin/bash /usr/bin/config-chassisdb
├─575 /usr/bin/python3 /usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform
├─602 /bin/sh -c sudo decode-syseeprom -m
├─603 sudo decode-syseeprom -m
├─607 /usr/bin/python3 /usr/local/bin/decode-syseeprom -m
├─616 /bin/sh -c docker --version 2>/dev/null
└─617 docker --version
- How I did it
Use an alternative way to implement this function and issue can be avoided:
docker_env_file = '/.dockerenv'
return os.path.exists(docker_env_file) is False
- How to verify it
run regression on real hardware and simx platform.
Why I did it
Update ECMP calculator README file with new instructions how to run the calculator.
How I did it
Update README file.
How to verify it
Read README file.
- Why I did it
Remove TODO comments which are no longer needed
- How I did it
Remove TODO comments which are no longer needed
- How to verify it
Only comment change
- Why I did it
Added ECMP calculator tool.
- How I did it
New files were added.
- How to verify it
Manual tests performed according to tests chapter in HLD
Automated tests will be added by verification.
- Why I did it
Add support for compiling Spectrum-4 ASIC firmware to the SONiC image
Add support for Spectrum-4 ASIC firmware upgrade
- How I did it
Update Mellanox fw make files to include Spectrum-4 ASIC firmware binaries.
Update firmware upgrade scripts to be able to detect Spectrum-4 ASIC.
- How to verify it
Run regression tests
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add SDK hash calculator Debian and update SDK makefile to compile it.
- How I did it
SDK hash calculator Debian will be used by ECMP calculator (PR #12482)
- How to verify it
Compile sonic-buildimage and verify SDK hash calculator Debian exist in target folder.
* Support power threshold
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* get_psu_power_warning_threshold => get_psu_power_warning_suppress_threshold
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Fix comments
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Update SN2201 dynamic minimum fan speed table according to data provided by the thermal team.
- How I did it
Update the thermal table in device_data.py
- How to verify it
Run platform related regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Update SDK/FW version - 4.5.3186/2010_3186 in order to have the following changes:
New functionality:
1. Added support for 6.5W (Class 8) in ports 49-50, 53-54, 57-58, and 61-62 on SN4600 system
Fix the following issues:
1. On very rare occasion (~1/100K), during I2C transaction with MMS1V50-WM and MMS1V90-WR modules on SN4700 system, the module may send unexpected stop which violate the I2C specification, possibly affecting the link up flow
2. When running 1GbE speeds on SN4600 system, the port remained active while peer side was closed
3. While toggling the cable with ‘sfputil lpmode on/off’, error msg like “ERR pmon#xcvrd: Receive PMPE error event on module 1: status {X} error type {y}” could be received
4. When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted
5. When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU
6. While moving from lossless to lossy mode while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized
7. SLL configuration is missing in SDK dump
8. If TTL_CMD_COPY is used in Encap direction for a packet with no TTL, then the value passed in the ttl data structure will be used if non-zero (default 255 if zero)
9. PCI calibration changes from a static to a dynamic mechanism
10. Layer 4 port information is not initialized for BFD packet event. To address the issue, remote peer UDP port information was added in BFD packet event
11. SDK returned error when FEC mode is set on twisted pair, when FEC was set to None
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
Signed-off-by: dprital <drorp@nvidia.com>
This fixes the following error
```
admin@sonic:~$ sudo fwutil show status
mount: /mnt/onie-fs: special device /dev/sda2
does not exist.
Error: Command '['mount', '-n', '-r', '-t', 'ext4', '/dev/sda2\n', '/mnt/onie-fs']' returned non-zero exit status 32.. Aborting...
Aborted!
admin@sonic:~$ sudo vi /usr/local/lib/python3.9/dist-packages/sonic_platform/
```
Seems like #11877 the rstrip('\n') was removed. Probably by mistake.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: maipbui <maibui@microsoft.com>
Dependency: [PR (#12065)](https://github.com/sonic-net/sonic-buildimage/pull/12065) needs to merge first.
#### Why I did it
`subprocess.Popen()` and `subprocess.check_output()` is used with `shell=True`, which is very dangerous for shell injection.
#### How I did it
Disable `shell=True`, enable `shell=False`
#### How to verify it
Tested on DUT, compare and verify the output between the original behavior and the new changes' behavior.
[testresults.zip](https://github.com/sonic-net/sonic-buildimage/files/9550867/testresults.zip)
- Why I did it
To update MFT package to the latest version.
- How I did it
Updated MFT_VERSION & MFT_REVISION in platform/mellanox/mft.mk.
- How to verify it
Build an image and deploy to the switch
Check MFT version by dpkg -l | grep mft
Verify that all the SONiC services up and running
Run regression testing using tests from sonic-mgmt
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
To include latest fixes and new functionality
SAI fixes and new features
fix#3205239, incorrect object type returned for SG child list
Fix VRF-VNI map entries remove issue
ECC health event and logging
[Port Buffers] restore default queue and pg configuration when all user pools are deleted
Fix EVPN type3 error on removal of uc/bc flood group
Fix EVPN type2 MAC move from local to remote results in SAI failure
Fix Disable learning on VXLAN tunnel
Fix error on VXLAN v6 tunnel removal
Fix port cannot apply schedule group when it is a lag member
Fix BFD add more detailed message on BFD packet not related to any existing session
gcc10 compilation fixes
Disable learning on VXLAN tunnel
Support BFD remote-disc exchange in negotiation stage
Tunnel Loopback packet action attribute implementation (for Dual TOR)
Add KVD resources MIN/MAX functionality (pending CRM issue with MIN only)
Support for CRC2 hash algorithm
Bulk counter support for PGs, queues
Support mirror sample rate attribute (SPC2+)
[Functional] [QoS] | Unable to remove SCHEDULE profile table even if there is no object referencing it
Next hop group optimized bulk API
Reduce verbosity of shared database already exists print
Span mirror policer (SPC2+), optimize pipeline for acl mirror action with policer on SPC2+
use same size descriptor pool for rx/tx
fix bfd - notify Sonic for admin-down event
2201 - empty list for supported fec for RJ45 ports
Fix don't disable used tunnel underlay interfaces
SDK fixes
100GbE FCI DAC (10137628-4050LF/HPE PN: 845408-B21) was recognized by mistake as supporting "cable burning' which caused the switch firmware to read page 0x9f (which unsupported in the cable) and to report this cable as having "bad eeprom".
Added remote peer UDP port information in BFD packet event.
After editing an ECMP, the resilient ECMP next-hop counter may not count correctly.
Fixed potential memory leaks in some APIs related to LPM
If TTL_CMD_COPY is used in Encap direction for a packet with no TTL, then the value passed in the ttl data structure will be used if non-zero (default 255 if zero).
In SN2201: When configuring Force mode, user should configure Speed and FEC on both sides
In Flex Tunnel encapsulation flow, if the encapsulation is with an IPv6 header, the flow label field may not be updated as expected.
In some cases, when changing speed to 400GbE over 8 lanes, the first few packets would be dropped.
In some traffic patterns involving small packets, the PortRcvErrors counter may mistakenly count events of local physical errors due to an internal flow in the hardware that involves link packets.
On Spectrum systems, sometimes during link failure, not all previous firmware indications cleared properly, potentially affecting the next link up attempt.
On the NVIDIA Spectrum-2 switch, when receiving a packet with Symbol Errors on ports that are configured to cut-thought mode, a pipeline might get stuck.
PCI calibration changes from a static to a dynamic mechanism.
SDK debug dump shows "Unknown" Counter in RFC3635 Counter Group.
SDK debug dump shows "Unknown" Counter in the PPCNT Traffic Class Counter Group.
SDK Dump missing column headers in some GC tables may result in difficulty understanding the dump.
SLL configuration is missing in SDK dump.
Spectrum-2 systems, do no support 1GbE on supported 40GbE modules.
When binding a UDP port which is already in use for BFD TX session, the error message appears incorrectly.
When Flex Tunnel was used, Flex Modifier sometimes experienced a brief mis-configuration during ISSU.
When many ports are active (e.g. 70 ports up), and the configuration of shared buffer is applied on the fly, occasionally, the firmware might get stuck.
When running 1GbE speeds on SN4600 system, the port remained active while peer side was closed.
When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted.
When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU.
While toggling the cable, and the low power mode is set to ON, an unexpected PMPE event error is received.
- How I did it
Updated SDK/SAI submodule and relevant makefiles with the required versions.
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
get_rx_los and get_tx_fault is not supported via the exisitng interface used, need provide dummy implementation for them.
NOTE: in later releases we will get them back via different interface.
- How I did it
Return False * lane_num for get_rx_los and get_tx_fault
- How to verify it
Added unit test
- Why I did it
Fix a typo in chassis platform API which causes the following error
>>> import sonic_platform as P
>>> c = P.platform.Platform().get_chassis()
>>> sl = c.get_all_sfps()
>>> sl[0].get_lpmode()
Sep 28 07:48:33 INFO LOG: Initializing SX log with STDOUT as output file.
False
>>> del c
Exception ignored in: <function Chassis.__del__ at 0x7f1d166ef8b0>
Traceback (most recent call last):
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 126, in __del__
self.sfp_module.deinitialize_sdk_handle(sfp_module.SFP.shared_sdk_handle)
NameError: name 'sfp_module' is not defined
- How I did it
Use self while using the SDK handle
- How to verify it
Manual test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
This reverts commit 9750cb4.
There is a PR to handle 202205 branch revert: #12184
- Why I did it
The PR to be reverted introduced many notice logs every 1 minute if SFP is not plugged:
Cannot get module EEPROM information: Input/output error
Before the "bad" PR, the message format is like this:
INFO pmon#supervisord: xcvrd Cannot get module EEPROM information: Input/output error
It was truncated by rsyslog because every message is the same. However, the "bad" PR introduces SFP index to the message:
NOTICE pmon#xcvrd: Failed to get EEPROM data for sfp 39: Cannot get module EEPROM information: Input/output error
Rsyslog no longer truncate such log and many such messages are flooded to syslog.
- How I did it
Revert the PR
- How to verify it
Manual test
- Why I did it
Update SDK/FW version - 4.5.2320/2010_2320 in order to have the following fixes:
• Spectrum-3 | PCI calibration changes from a static to a dynamic mechanism.
• [VxLAN] TTL was set to 0 for non IP traffic (such as ARP)
- How I did it
Update pointer for the SDK/FW
- How to verify it
Run regression tests
- Why I did it
ethtool print error logs when EEPROM of a SFP is not available. It prints error like this:
INFO pmon#/supervisord: xcvrd Cannot get module EEPROM information: Input/output error
INFO pmon#/supervisord: xcvrd Cannot get Module EEPROM data: Invalid argument
However, this log does not contain the relevant SFP index which is hard for developer/qa to find the exactly SFP.
- How I did it
Redirect ethtool stderr to subprocess and log it better
- How to verify it
Manual test
- Why I did it
Update SDK/FW version - 4.5.2318/2010_2318 to pick up new fixes:
1. Cr space timeout on Hold and Release GW - at warm boot
2. Spectrum Port in stuck PHY_UP after peer side rebooted
3. Memory leak in sx_api_router_ecmp_update_set
- How I did it
Update the make file with the new version number
Update submodule Switch-SDK-drivers pointer
- How to verify it
Run sonic regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add PSU input voltage and input current to mlnx platform api.
- How I did it
Implement 2 function of getting the psu voltage and psu current input:
Get the values from "power/psu{}_curr_in" , "power/psu{}_volt_in"
- How to verify it
Manual test.
Run sonic-mgmt regression
Signed-off-by: orfar1994 <orfar1994@gmail.com>
- Why I did it
Add more log while doing sysfs reading to increase the debug capability
- How I did it
Log the relevant file path and error number while sysfs reading return None
- How to verify it
Manual test
- Why I did it
Support get_port_or_cage_type for RJ45 ports
- How I did it
Implement the new platform API get_port_or_cage_type
Fix the issue: unable to import SFP when chassis object is destructed
- How to verify it
Manually test and regression test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Fix bug: pmon report error on start up because some SKUs do not have hwsku.json
- How I did it
If hwsku.json, do not extract RJ45 port information
- How to verify it
Manual test.
Unit test.
- Why I did it
Add support for mellanox platform building for target architecture arm64.
- How I did it
Contains the following changes:
1. Change instances of hard-coded amd64 to $(CONFIGURED_ARCH)
2. Add logic to download correct binary for MFT package
3. Add TARGET_BOOTLOADER=grub definition to rules.mk to override default arm64 bootloader
- How to verify it
Build mellanox platform with TARGET_ARCH set as arm64
- Why I did it
Advance to new SAI version for bugs fixes as well as new features/enhacements:
New:
- ARM64 support
- FG ECMP performance optimization
- Support setting empty list for port ingress/egress buffer profile list
- Add service port for SN5600
- Add CR8/SR8/LR8/KR8 interface type
- Disable mlxtrace during debug dump
Fixes:
- Fix SAI_ACL_ENTRY_ATTR_FIELD_TC
- Fix Packets loop back if no member in portchannel
- Fix optimize descriptors apply time (and fast boot time)
- Add flush fdb entries for vxlan tunnel bridge port
- Don't disable used tunnel underlay interfaces
- How I did it
Advanced SAI submodule
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
- Why I did it
This is for the eventual support of multiple architectures for the mellanox platform.
- How I did it
Change the location of the binaries in Switch-SDK-drivers so that the path specifies the target architecture in addition to the target distribution that the debians are built for.
This is the most straightforward way to separate binaries built against different architectures and selectively target them for installation in the mellanox SONiC image.
- How to verify it
Build SONiC for mellanox and verify it compiles successfully.
- Why I did it
To provide an ability to suppress ASAN false positives and have a clean ASAN report for docker-sonic-vs/mlnx-syncd/orchagent docker
- How I did it
Added the "print_suppressions=0" to ASAN configs.
- How to verify it
add a suppression to some ASAN-enabled component (the suppression should catch some leak)
build with ENABLE_ASAN=y
run a test and see that the ASAN report is empty instead of having the suppression summary
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
* Support new platform SN2201 and RJ45 port
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* remove unused import and redundant function
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* fix error introduced by rebase
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* Revert the special handling of RJ45 ports (#56)
* Revert the special handling of RJ45 ports
sfp.py
sfp_event.py
chassis.py
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove deadcode
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Support CPLD update for SN2201
A new class is introduced, deriving from ComponentCPLD and overloading _install_firmware
Change _install_firmware from private (starting with __) to protected, making it overloadable
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Initialize component BIOS/CPLD
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove swb_amb which doesn't on DVT board any more
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove the unexisted sensor - switch board ambient - from platform.json
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Do not report error on receiving unknown status on RJ45 ports
Translate it to disconnect for RJ45 ports
Report error for xSFP ports
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Add reinit for RJ45 to avoid exception
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <5379172+stephenxs@users.noreply.github.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
"import sonic_platform" takes about 600ms ~ 1000ms, it is kind of slow. After this optimization, the time is about 100ms. The benefit is that those CLIs which does not need the slow import sentence would be faster than before.
- How I did it
Find slow import and call them when need.
- How to verify it
Measure the import time.
- Why I did it
To include latest fixes:
1. Warmboot | When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU.
2. Link Up | When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted.
3. Shared buffer | While moving from lossless to lossy while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized.
- How I did it
Updated SDK submodule along with the relevant Makefiles
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
Currently, the build with ASAN_ENABLE=y reuses the packages built with
ASAN_ENABLE=n (and vice versa). To address this issue, ASAN_ENABLE is added to DEP_FLAGS for asan-enabled packages (docker-syncd-mlnx, syncd, docker-orchagent, swss).
- Why I did it
To make dpkg cache use/rebuild the packages for ASAN_ENABLE=y/n.
- How I did it
Added ASAN_ENABLE to the DEP_FLAGS for asan-enabled packages.
- How to verify it
Built with ASAN_ENABLE=y/n and checked the .flags .log files.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
This is to improve the readability of ASAN reports. The debug package adds function names and source code references to the backtrace (currently, there are only binary addresses of functions)
Another way to address this issue is to build the image with "INSTALL_DEBUG_TOOLS=y". The downside of this approach is that the image size and compilation time are unnecessarily big. Also, the idea is to make the "ENABLE_ASAN" self-sufficient, which would not be the case for this approach.
- Why I did it
To improve the readability of asan logs.
- How I did it
Added SYNCD_DBG and SWSS_DBG to corresponding docker images for ASAN_ENABLE=y build
- How to verify it
Add artificial memory leak
Build with ASAN_ENABLE=y
Test the image and check the ASAN report
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Update MFT to newer version
- How I did it
Update MFT_VERSION in platform/mellanox/mft.mk
- How to verify it
Check version via dpkg -l | grep mft
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
- Why I did it
Script fails when there is an exception while reading
- How I did it
Add more logs and checks. Fix wrong variable naming and messages.
- How to verify it
Provoke exception while read_eeprom() and check that it is handled properly
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
Update SDK/FW to 4.5.1500/2010.1500 and SAI version to 1.21.1.1
SDK/FW features:
1. Added support for Finisar DR4 (FTCD4523E2PCM) on Spectrum-2 and Spectrum-3 systems.
SAI Features:
1. ECMP overlay support for IPv6
2. BFD offloading / 4K scale
3. Host interface user traps + improved trap registration (table entry)
4. gcc11 compilation fixes
5. Read support for ACL redirect action
6. Optimize ECMP DB size
7. Buffer descriptors new defaults
8. Updated port mapping for SN2201
SAI Fixes:
1. Debug counter removal when configured with all drop reasons
- Why I did it
Upgrade Mellanox SDK and SAI versions to latest
- How I did it
Updated submodule pointers
- How to verify it
Regression tested
Currently, the build dockers are created as a user dockers(docker-base-stretch-<user>, etc) that are
specific to each user. But the sonic dockers (docker-database, docker-swss, etc) are
created with a fixed docker name and common to all the users.
docker-database:latest
docker-swss:latest
When multiple builds are triggered on the same build server that creates parallel building issue because
all the build jobs are trying to create the same docker with latest tag.
This happens only when sonic dockers are built using native host dockerd for sonic docker image creation.
This patch creates all sonic dockers as user sonic dockers and then, while
saving and loading the user sonic dockers, it rename the user sonic
dockers into correct sonic dockers with tag as latest.
docker-database:latest <== SAVE/LOAD ==> docker-database-<user>:tag
The user sonic docker names are derived from 'DOCKER_USERNAME and DOCKER_USERTAG' make env
variable and using Jinja template, it replaces the FROM docker name with correct user sonic docker name for
loading and saving the docker image.
- Why I did it
InvalidPsuVolWA.run might raise exception if user power off PSU when it is running. This exception is not caught and will be raised to psud which causes psud failed to update PSU data to DB.
- How I did it
1. Change the log level when WA does not work. This could happen when user power off PSU, hence changing the log level from error to warning is better
2. Change the wait time from 5 to 1 to avoid introduce too much delay in psud. 1 second is usually enough per my test
3. Give a default return value for function get_voltage_low_threshold and get_voltage_high_threshold to avoid exception reach to psud
- How to verify it
Manual test.
Run sonic-mgmt regression
