adf5ab58 [vstest/subintf] Add vs test case to validate processing sequence of APPL DB keys (#1663)
8a732726 [intfsorch] Create subport with the entry contains necessary attributes (#1650)
7ba813b2 [vstest/subintf] Update vs tests to validate physical port host interface vlan tag attribute (#1634)
ed32e333 [portsorch] Configure hostif tagging for subports (#1573)
b5209c43 Handle IPv6 and ECMP routes to be programmed to ASIC (#1711)
515cc1a7 [Dynamic buffer calc][Mellanox] Fix bug: buffer over subscription in buffer pool size calculation (#1706)
0ad524b2 [202012] Allowing the first time FEC and AN configuration to be pushed to SAI (#1710)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
This is the SAI 4.3.3.5 code drop from BRCM to address 2 CSP case and initial MMU changes
Note the MMU changes is the same as that of SAI 4.3.3.4-1 (#7341) but with official patch.
- Case CS00012178716 [4.3] Polling SAI_QUEUE_STAT_SHARED_WATERMARK_BYTES fails often on TH3
- Case CS00012159273 [4.3.3.3] [TD3][IPFWD] subnet broadcast flooding end with extra VLAN Tag if member port of VLAN interface deleted then added back to VLAN
Once we have this PR merged, will validate each one of the above to ensure they are indeed fixed...
Preliminary tests looks fine. BGP neighbors were all up with proper routes programmed
interfaces are all up
Manually ran the following test cases on TD3 DUT and all passed:
ipfwd/test_dir_bcast.py
fib/test_fib.py
vxlan/test_vxlan_decap.py
decap/test_decap.py
fdb/test_fdb.py
New features and fixes in the new SDK/FW:
SN4600C | AN/LT support
SN2700 | AN/LT bugs fixes
WJH | FID_MISS support
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Set hierarchical ecmp level to 2 instead of 3. Based on CS00011833367, ecmp level must be set to 2.
This is already handled for TH2 platforms. Change is required only for TD3
Co-authored-by: Ubuntu <prsunny@prince-vm.vzw1i4tqyeburcdz5lrgulxi2c.yx.internal.cloudapp.net>
#### Why I did it
- xcvrd crash was seen in latest 201811 images.
- For Dell S6100,API 2.0 uses poll mode while 1.0 was still using interrupt mode.
#### How I did it
- Modified get_transceiver_change_event in 1.0 to poll mode.
1) Dropped non-required IP update in admin.conf, as all masters use VIP only (#7288)
2) Don't clear VERSION during stop, as it would overwrite new version pending to go.
3) subprocess, get return value from proc and do not imply with presence of data in stderr.
Fix to the correct value for all SPC1 devices.
For 10G added 10GB_CX4_XAUI, 10GB_KX4, 10GB_KR, 10GB_SR and 10GB_ER_LR
For 50G added 50GB_SR2
This bitmask represents all the options available for interface type and some were missing.
Note: it was working just fine if you were setting the value from SONiC CLI but not from the default SAI Profile.
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Encounter error during "config-setup boot" if the updategraph is enabled.
How I did it
Correct the code inside the config-setup script.
Remove the space between the assignment operator.
How to verify it
Remove the /etc/sonic/config_db.json and reboot the device.
Originally, it will return following error after boot up.
rv: command not found
After modification, it can correctly parse the status of updategraph without error.
Modified the MRVL SAI debian version format to include debian revision number. This helps in identifying the SAI deb causing any build/runtime issue.
Signed-off-by: Rajkumar Pennadam Ramamoorthy <rpennadamram@marvell.com>
Compiling ethtool from source is causing ethtool unit tests to fail on ARM Platforms.
These tests are failing: (By default netlink-interface is enabled while compiling ethtool)
Link: ([Test File Link](https://salsa.debian.org/kernel-team/ethtool/-/blob/debian/1%255.9-1/test-cmdline.c#L28))
```
FAIL: test-cmdline
==================
E: ethtool 16_char_devname! returns 1
E: ethtool
127_char_devname0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcde returns 1
E: ethtool --change devname xcvr external returns 0
E: ethtool --change devname speed 100 duplex half port tp autoneg on advertise 0x1 phyad 1 xcvr external wol p sopass 01:23:45:67:89:ab msglvl 1 returns 0
FAIL test-cmdline (exit status: 1)
```
Tested this on Local ARM Emulated Container:
```
(Docker Container Emulating ARM)
vkarri@3a03c70eed35:/tmp/ethtool$ ./ethtool 16_char_devname!
netlink interface initialization failed, device name longer than 15 not supported
vkarri@3a03c70eed35:/tmp/ethtool$ echo $?
1 (Expected 0)
vkarri@3a03c70eed35:~/ethtool$ ./ethtool 16_char_devnameee
netlink interface initialization failed, device name longer than 15 not supported
Checked for dependencies: (all are present)
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libmnl0
libmnl0:
Installed: 1.0.4-2
Candidate: 1.0.4-2
Version table:
*** 1.0.4-2 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
vkarri@3a03c70eed35:~/ethtool$ apt-cache policy libc6
libc6:
Installed: 2.28-10
Candidate: 2.28-10
Version table:
*** 2.28-10 500
500 http://deb.debian.org/debian buster/main armhf Packages
500 http://packages.trafficmanager.net/debian/debian buster/main armhf Packages
100 /var/lib/dpkg/status
```
#### How I did it
Disabled netlink-interface for ethtool.
Even though Netlink is not available, it doesn't seem to impact what ethtool was supposed to do. In fact the older version which was in use before this PR [#5725](https://github.com/Azure/sonic-buildimage/pull/5725) did not have netlink support and everything seemed to work well
Article on Netlink-Support for ethtool: https://lwn.net/Articles/783633/
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
Recently created a 202012 branch of sonic-platform common.
Update .gitmodules to track that branch of the submodule in the 202012 branch of sonic-buildimage.
* 7260cx3 DualToR config.bcm support based on DualToR setting in device metadata at boot time.
For HWSKU Arista-7260CX3-C64 the MMU setting SOC for T0/T1 is also combined into the config.bcm.j2 logic so use just one config file and adding delta based on Switch Roles.
- Add peer_switch field to DEVICE_METADATA table
- In PORT table:
- Set used ports to admin status up
- Set mux_cable to true for downlinks in use
- In MUX_CABLE table:
- Only add entry if the downlink is in use
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
sonic-swss
* Don't update pools when ingress_lossless_pool is created but the initialization hasn't finished yet (#1685)
* Fix dynamic buffer bug occuring in rare condition (#1678)
sonic-utilities
* [load_minigraph]: Avoid starting PFCWD for EPMS devicetype (#1552)
Signed-off-by: Danny Allen <daall@microsoft.com>
- [pyext] Fix pyext/py2 library (#820)
- Added --purge of base docker image packages before installing new ones. (#819) <--- branch point
Signed-off-by: Danny Allen <daall@microsoft.com>
- [xcvrd] refactor Y-Cable firmware information to conform with all vendors (#171)
- [thermalctld] No need exit thermalcltd when loading invalid policy file (#172) <--- branch point
Signed-off-by: Danny Allen <daall@microsoft.com>
Support to merge the SONiC package versions upgrade pull request automatically.
#### How I did it
Add the automerge tag in the pull request.
1. Sent by the author mssonicbld
2. Only contains changes in files/build/**/*
3. Only for the specified branch 202012
Merge the pull request.
1. Sent by the author mssonicbld
2. The Azure Pipelines checker complete and successful
3. The pull request contains label automerge
c4d4790 [xcvrd] refactor Y-Cable firmware information to conform with all vendors (#171)
be7f4e1 [voqinband]Support for inband port as regular port (#145)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
eff5c1c [thermalctld] No need exit thermalcltd when loading invalid policy file (#172)
5b6d9c0 [syseepromd] Add unit tests; Refactor to allow for greater unit test coverage (#156)
This improvement reads current SONiC version directly from `/proc/cmdline`.
it supports `grub/aboot/uboot` bootloaders.
**Code snippet**:
```bash
cat /proc/cmdline | sed -n 's/^.*loop=\/*image-\(\S\+\)\/.*$/\1/p'
```
**Description**:
```
-n don't print lines
s substitute
^.* matches anything before the <image_version>
loop= matches <loop> kernel parameter
\/*image- matches <image_version> prefix
\(\S\+\) matches <image_version> group and assigns it to \1
\/.*$ matches anything after the <image_version>
\1 replace everything with <image_version>
p print it
```
closes#6267
#### Why I did it
* To fix#6267
#### How I did it
* Fixed installer scripts
#### How to verify it
1. Write invalid SONiC version to sonic_version.yml
2. Run SONiC-To-SONiC update
Changes:
ac4596a [intfmgrd] reach reconciled state at start when there are no interfaces configuration to process (#1703)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
1c3f75e (HEAD -> master, origin/master, origin/HEAD) pindown the version of github.com/openconfig/gnoi (#76)
33acd5b [ci]: setup proper azp (#75)
5d82051 [CI] Set up CI with Azure Pipelines (#72)
0688cdb Remove go get commands from Makefile to prevent go.mod file from chan… (#66)
Why I did it
These ports are being enumerated by the latest SAI. But they are not defined in port_config.ini.
SONiC end up trying to delete these 3 ports and hit SAI error and crash.
How I did it
Add the GbE and the 2 HiGig ports in the port_config.ini.
How to verify it
Put the port_config.ini on a device crashing with port deleting. load minigraph and the crash stopped.
Signed-off-by: Ying Xie ying.xie@microsoft.com
The platform name for MSN4600C in sfputil pliugin is not complete: "x86_64-mlnx_msn4600c" -> "x86_64-mlnx_msn4600c-r0"
Signed-off-by: Kebo Liu <kebol@nvidia.com>
872f0a3 [Y-Cable] refactor get_firmware_version to comply with all vendors (#182)
cc162d6 [sonic_y_cable]: Decorate all method for mux simulator (#181)
fa02416 Change import order in Ycable helper and EEPROM read bytearray change in SFP plugin (#177)
0b60982 [thermal_base] Add setter functions for critical thresholds (#180)
10dc16f [y_cable] add support for enable/disable autoswitch feature on Y cable (#176)
c6c81a8 [fan_drawer_base.py] Fix FanDrawer get_status_led interface (#175)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Problem:
Default groupadd for redis, takes 1000 by default. This forces, subsequently created admin group to get 1001.
As all TACACS users are created with 1000 as their gid, they end up in redis group.
Fix:
Create redis group *after* admin group is created
Add a check that admin group id is 1000
Avoid the following error messages while dynamic buffer calculation is enabled
```
ERR monit[491]: 'swss|buffermgrd' status failed (1) -- '/usr/bin/buffermgrd -l' is not running in host
```
Change /usr/bin/buffermgrd -l to /usr/bin/buffermgrd. The buffermgrd is started by -l for traditional model or -a for dynamic model. So we need to use the common section of both.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Fix#7180
Update systemd to v247 in order to pick the fix for "core: coldplug possible nop_job" systemd/systemd#13124
Install systemd, systemd-sysv from buster-backports. Pass "systemd.unified_cgroup_hierarchy=0" as kernel argument to force systemd to not use unified cgroup hierarchy, otherwise dockerd won't start moby/moby#16238.
Also, chown $FILSYSTEM_ROOT for root, otherwise apt systemd installation complains, see similar https://unix.stackexchange.com/questions/593529/can-not-configure-systemd-inside-a-chrooted-environment
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Feb 17 Fix tests failing due to duplicate vxlan tunnel creation (#75)
Mar 11 Update route api to specify limitation (#77)
Apr 01 Add host_ifname field while adding entry in VLAN table (#80)
