This is to address an issue where it was observed that SAI operations sometime make take a very long to time complete (over 45ms). It was determined that the ALPM distributed thread was causing this issue.
The fix is to disable this debug thread that has no functional purpose.
Preliminary tests looks fine. BGP neighbors were all up with proper routes programmed
interfaces are all up
Manually ran the fib test cases on 7050CX3 (TD3), TD2, TH, TH2, and TH3 based platforms and
thy all passed.
These changes are included in this PR:
07e1f79 [syncd] Add workaround for warm boot new objects (#959)
50fd353 Fix the option missing in kernel config issue (#956)
e77503c [syncd] Comparison logic workaround for empty buffer profile (#906) (#941)
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
Storage T0's have all vlan members as tagged
How I did it
Since currently minigraph does not have a unique way to identify if a vlan member is tagged/untagged and to ensure other scenarios are not broken, the logic used is to just update the vlan member type as 'tagged' when we determine that it is a storage backend device. This change will apply only to storage backend T0's since storage backend T1's will not have vlan member information
How to verify it
Updated the storage backend T0 testcases to check for tagged vlan members
Added testcase to check if a T1 and backend T1 device generates an empty vlan member table
Existing vlan member testcases are good enough for checking if any regression has been caused for regular T0's
Build sonic_config_engine-1.0-py3-none-any.whl successfully
bf7214c (HEAD -> 202012, origin/202012) [y_cable] add support for manual/standby mode in xcvrd for muxcable; fix download firmware version retrieval logic while download firmware in progress (#220)
fc6a41e (HEAD -> 202012, origin/202012) Fix typo in the simulated y_cable driver (#226)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Fix the check used to wait for interfaces to come up. The group name in
the supervisor config files has changed from isc-dhcp-relay to
dhcp-relay.
Also, in the wait script, wait 10 additional seconds after the vlans,
port channels, and any interfaces are up. This is because dhcrelay
listens on all interfaces (in addition to port channels and vlans), and
to ensure that it stays in a clean state during runtime, wait some extra
time to make sure that those interfaces are created as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
This PR updates the following commits
0770dec Add retry reading/setting mux status to simulated y-cable driver (#221)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Redis 4.0.0b1 has been uploaded to pip as a prerelease version. This
version drops support for Python 2 and only supports Python 3. Because
setup.py is being run, it will use the latest version of a package and
not the latest stable version (which is still 3.5.3).
Therefore, pin the redis package to version 3.5.3, so that it will work
for both Python 2 and 3.
#### How to verify it
Make sure that redis-dump-load for Python 2 builds today.
Since database.service has been moved to execute after rc-local.service,
and determine-reboot-cause.service rely on database.service, we have to
specify that in "After=".
Signed-off-by: Xichen Lin <xichenlin@microsoft.com>
Co-authored-by: Xichen Lin <xichenlin@microsoft.com>
Include the following commits:
f9bbed3cb86a3bab9a07745096835dbdbe5a4db6
Convert Unit Tests from unittest framework to pytest framework
e842c5ff317c67919dcbcab3358143cb9a16c9dd
Generate code coverage for Unit Tests
A new config option `sai_verify_incoming_chksum` was added to control the value of IPV4_INCR_CHECKSUM_ORIGINAL_VALUE_VERIFY in the EGR_FLEX_CONFIG control register (this prevents checksums of 0xffff from being propagated to other devices)
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
How I did it
Added if multi npu check before invoking the load global config.
How to verify it
Restart caclmgrd after this change and check if no error log is thrown.
0b5f90b (HEAD -> 202012, origin/202012) [show techsupport] fix bash errors in generate_dump script (#1844)
388c50c [202012][warmboot] Add new preboot health check: verify db integrity (#1839)
d73dc98 [config] support for configuring muxcable to standby mode of operation (#1837)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* [202012][sonic-platform-daemons] submodule update
3d14066 [xcvrd][y_cable] refactor xcvrd to listen to port probe without locks; fix the get_firmware_version API to sync with download_firmware (#216)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
* update sonic-platform-common
93244bf [Y-Cable][Broadcom] upgrade to support Broadcom Y-Cable API to release 1.2 (#217)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Fix for sonic-cfggen exception during platform string read during fresh install and start of sonic in multi asic, /var/run/redisX/ is created after database docker is started.
* c3691d3 [202012][pfcwd] Convert polling interval from ms to us in LUA scripts (#1909)
* 549c804 Mux state order change (#1902)
* 6b0b2c4 Update acl type check logic (#1886)
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
* 2a8957d 2021-09-14 | [202012][sonic-utilities] CLI support for port auto negotiation (#1817) (HEAD, origin/202012) [vdahiya12]
Signed-off-by: Guohan Lu <lguohan@gmail.com>
* d03ba4f [202012] [portstat, intfstat] added rates and utilization (#1812)
* 499ad3f [config reload] Fix config reload failure due to sonic.target job cancellation (#1814)
* 96d658c [202012][sonic installer] Add swap setup support (#1815)
* a9c6970 platform pre-check for reboot in 202012 branch (#1788)
* 0e0478b Unify the number format in the ourput of portstat and pfcstat in all cases (#1795)
* 2d1e00e [ecnconfig] Fix exception seen during display and add unit tests (#1784) (#1789)
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
* 0323d5e noaOrMlnx Fix flex counters logic of converting poll interval to seconds from MS (#878)
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
This PR updates the following commits in sonic-platform-common
9d2e7d5 Add y-cable driver for simulated mux (#213)
e3e8f09 [Y-Cable][Broadcom] Broadcom implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#208)
This PR updates the following commits in sonic-platform-daemons
ebc4f3f [Y-Cable] create unknown entries for mux_cable when there is a cable present but module definition is not present/invalid module
b10c417 [xcvrd] initial support for integrating vendor specfic class objects for calling Y-Cable API's inside xcvrd (#197) (#213)
f3fc1ea [y-cable] fix for logging the xcvrd metrics before writing the state to the State-DB (#208)
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
