This fixes the build for armhf to be able to use '/device///installer.conf' files. Specifically, armhf needs support to be able to change the size of /var/log/ directory. It is hardcoded to 512 bytes on all armhf platforms currently. This change will allow any armhf platform to be able to use an installer.conf file to customize the installed image.
* [Tunnel PFC] Tests for adding property 'sai_remap_prio_on_tnl_egress'
Add tests for adding property 'sai_remap_prio_on_tnl_egress', this
property should only be added in dual tor environment.
Test done:
Run test test_j2files.py
Co-authored-by: richardyu <richardyu@contoso.com>
Why I did it
Make reset didn't clean-up all fsroot folders.
How I did it
Remove all fsroot folders used during build.
How to verify it
Run local build and local make reset:
sudo mkdir fsroot-test
sudo touch fsroot-test/foo
make reset
(Without this change, make reset cannot remove fsroot-foo, with the change, the repo become clean after make reset.)
Signed-off-by: Ying Xie ying.xie@microsoft.com
- Why I did it
1. SN2201 sai profile needs to be updated according to the latest hardware.
2. In the reboot script, need to use the common symbol link of the power_cycle sysfs instead of directly accessing it due to SN2201 sysfs is different than other platforms.
3. echo 1 > $SYSFS_PWR_CYCLE will trigger the reboot immediately, the following sleep 3 and echo 0 > $SYSFS_PWR_CYCLE will never be executed, can be removed.
- How I did it
1. Replace the SN2201 sai profile with the latest one.
2. In the platform_reboot script, replace the direct sysfs path with the symbol link path.
3. Remove the redundant code from platform_reboot
- How to verify it
Perform reboot on all the Nvidia platforms, and check all can be rebooted successfully.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
"import sonic_platform" takes about 600ms ~ 1000ms, it is kind of slow. After this optimization, the time is about 100ms. The benefit is that those CLIs which does not need the slow import sentence would be faster than before.
- How I did it
Find slow import and call them when need.
- How to verify it
Measure the import time.
Why I did it
Some PR test are timing out on T1-lag kvm test.
How I did it
Increase the timeout to 5 hours.
How to verify it
Test on this PR.
Signed-off-by: Ying Xie ying.xie@microsoft.com
* [Tunnel PFC] Add property for tunnel PFC
Replace the config.bcm file with j2 template file
- Add 'sai_remap_prio_on_tnl_egress=1' property when device metadata local
- Host subtype is 'dualtor'
- Change sai.profile foe the new config.bcm.j2
Including change:
* 7ff8f75 2022-06-03 | Revert "[portsorch]: Prevent LAG member configuration when port has active ACL binding (#2165)" (#2306) (HEAD -> 202205, github/202205) [bingwang-ms]
Signed-off-by: Ying Xie <ying.xie@microsoft.com>
#### Why I did it
No logs currently exist for sonic-save-X containers which makes it difficult to debug.
#### How I did it
Altered Makefile.work to create logs in the sonic-slave-X folder while still displaying the log to the screen to prevent interfering with any existing tooling.
#### How to verify it
Do `make configure` and verify that logs show up in `sonic-slave-buster/` and `sonic-slave-bullseye/`
#### Description for the changelog
Add logging for slave container builds
#### A picture of a cute animal (not mandatory but encouraged)
TBD
* When reloading config after crashes, VTEP interfaces are sometimes not created since the tunnel still exists in the STATE_DB.
* Adding VXLAN_TUNNEL_TABLE to the list of tables to be cleaned in swss.sh fixes the problem.
Currently, the build with ASAN_ENABLE=y reuses the packages built with
ASAN_ENABLE=n (and vice versa). To address this issue, ASAN_ENABLE is added to DEP_FLAGS for asan-enabled packages (docker-syncd-mlnx, syncd, docker-orchagent, swss).
- Why I did it
To make dpkg cache use/rebuild the packages for ASAN_ENABLE=y/n.
- How I did it
Added ASAN_ENABLE to the DEP_FLAGS for asan-enabled packages.
- How to verify it
Built with ASAN_ENABLE=y/n and checked the .flags .log files.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
This is to improve the readability of ASAN reports. The debug package adds function names and source code references to the backtrace (currently, there are only binary addresses of functions)
Another way to address this issue is to build the image with "INSTALL_DEBUG_TOOLS=y". The downside of this approach is that the image size and compilation time are unnecessarily big. Also, the idea is to make the "ENABLE_ASAN" self-sufficient, which would not be the case for this approach.
- Why I did it
To improve the readability of asan logs.
- How I did it
Added SYNCD_DBG and SWSS_DBG to corresponding docker images for ASAN_ENABLE=y build
- How to verify it
Add artificial memory leak
Build with ASAN_ENABLE=y
Test the image and check the ASAN report
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
* Removed unused default_config.json
* Remove asic.conf file from HW SKUs directories as they are not used by upstream code
* Enable dynamic PCI ID identification on Otterlake2
Co-authored-by: Maxime Lorrillere <mlorrillere@arista.com>
Why I did it
Fix the target directory not empty issue when publishing artifacts.
Some of the artifacts are published to $(Build.ArtifactStagingDirectory)/target/ before source code checked out.
- Why I did it
Yang Model about password hardening feature, the sonic CLI of this feature was autogenerated from this Yang model
- How I did it
Create new Yang model in src/sonic-yang-models/yang-models/sonic-passwh.yang.
- How to verify it
There are unitests(yang test) in this P.R covering all the passwords policies with good and bad values cases.
Or is possible manually using the config/show password commands that were autogenerated from this Yang model. (this CLI code added in sonic-utilities)
- Why I did it
Update MFT to newer version
- How I did it
Update MFT_VERSION in platform/mellanox/mft.mk
- How to verify it
Check version via dpkg -l | grep mft
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Official build fails complaining missing below targets:
2022-05-25T10:50:38.0560306Z tar: target/debs/buster/libyang2-cpp1_2.0.112-6_amd64.deb: Cannot stat: No such file or directory
2022-05-25T10:50:38.0571392Z tar: target/debs/buster/libyang2-cpp-dev_2.0.112-6_amd64.deb: Cannot stat: No such file or directory
2022-05-25T10:50:38.0588893Z tar: target/debs/buster/libyang2-cpp1-dbgsym_2.0.112-6_amd64.deb: Cannot stat: No such file or directory
2022-05-25T10:50:38.0590887Z tar: target/debs/buster/yang-tools_2.0.112-6_all.deb: Cannot stat: No such file or directory
Signed-off-by: Neetha John <nejo@microsoft.com>
Why I did it
There was a typo in hwsku specified as part of #10889
How I did it
Replaced with the correct hwsku
How to verify it
test_cfggen.py is passing
Updating sonic-utilities sub module with the following commits
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### Why I did it
To fix hostcfgd can't terminate by sigint issue, need update sonic-swss-common submodule.
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
#### Description for the changelog
84dbd93 Clear the fvs vector before popping the message out of notification
a90b2b7 selectabletimer: add mutex to start() and stop()
7ae22be Fix SIGTERM can't terminate PubSub::listen issue
#### A picture of a cute animal (not mandatory but encouraged)
#### Why I did it
For yang model, sample_config_db.json file was missing Sample data for the features SNAT/DNAT/IPMC
#### How I did it
Added the SNAT,DNAT,IPMC(low Threshold/high threshold/threshold_type)entries in CRM table.
#### How to verify it
With sanity Build/test only.
[muxorch] Handling optional attributes in muxorch (#2288)
Update netlink messages handler (#2233)
Broadcast Unknown-multicast and Unknown-unicast Storm-control (#1306)
[vstest]: Increase PollingConfig default timeout (#2285)
[FDB] Fix fbdorch to properly handle syncd FDB FLUSH Notif (#2254)
[macsecorch]: Support for non-default sa per sc (#2250)
Migrating the NAT vs tests from Click to direct DB access (#2278)
[neighsync] Ignoring IPv4 link local addresses (#2260)
[IntfMgrd] Retry adding ipv6 prefix by setting disabled_ipv6 flag (#2267)
Increase Redis Timeout value for Switch Create Opration for Packet (#2243)
Update fdborch.cpp (#2261)
Signed-off-by: dprital <drorp@nvidia.com>
