Port index 22 is associated with phy23_config.json, then same port index 22 in phy24_config.json may cause gearbox port creation error. Port Ethernet22 maps to index 23.
Why I did it
This PR is to update Yang model for pfc_enable and pfcwd_sw_enable fields to support more than 2 queues, like 2,3,4,6.
Before this change, the regex "[0-7](,[0-7])?" accepts only no more than 2 queues.
How I did it
Update the regex pattern for pfc_enable and pfcwd_sw_enable, from "[0-7](,[0-7])?" to "[0-7](,[0-7])*
How to verify it
The change is verified by UT. The test input is updated to cover the change.
collected 3 items
tests/test_sonic_yang_models.py .. [ 66%]
tests/yang_model_tests/test_yang_model.py .
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Update BRCM KNET module to support new psample definitions from sflow dropmon feature
* Advance saibcm-modules-dnx
Change `sxdkernel start` to `sxdkernel restart`. If `syncd` service crashes in `ExecStartPre` systemd will not call `ExecStop` and thus will not call `sxdkernel stop`. Use of `sxdkernel restart` is more robust in terms of guarantees to restore the system after unexpected crashes.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
- Why I did it
SN5600 has an additional service interface with a different parameters than other interfaces.
- How I did it
Added the etp65 interface with the correct parameters.
- How to verify it
Run platform test on SN5600 platform.
Check the service port can startup correctly.
* Add k8s master feature
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update kubernetes version mistake and make variable passing clear
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Add CRI-dockerd package
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Update version variable passing logic
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Upgrade the worker kubernetes version
Signed-off-by: Yun Li <yunli1@microsoft.com>
* Install xml file parse tool
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Yun Li <yunli1@microsoft.com>
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com
Why I did it
Generate the port configuration required 400G ZR port from minigraph.
How I did it
Add parse logic to get tx_power and laser_freq from LinkMetadata section of the minigraph.
Add UT for packet-chassis and voq chassis
How to verify it
UT
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
bgp should be a per-asic service, and runs for each namespace on
multi-asic platforms. However, putting bgp in MULTI_INST_DEPENDENT
causes swss to be restarted as well as bgp. this is causing issues after #11000
Issue: #11653
This fix:
removes bgp from dependents list
adds a conditional that either adds bgp, or bgp@$DEV to separate
between single and multi-asic platforms
Why I did it
Update sonic-swss-common submodule to include events API that will be used to stream structured events
Contains only:
ecc13b2 2022-08-10 | APIs to support streaming structured events (https://github.com/sonic-net/sonic-buildimage/pull/667) [Zain Budhwani]
How I did it
Pull from latest commit in sonic-swss-common
How to verify it
Look at pointer for sonic-swss-common
- Add Watchdog remaining time API
- Add support for non-swappable fans via a FixedDrawer
- Add ASIC voltage tweaks for PikeZ product
- Add better pylint support
- Fix reboot-cause decision issue for future products
- Fix thermal issue for RJ45 ports
- Deprecate Catalina prototype support
- Why I did it
New SKU for MSN-4700 Platform i.e. Mellanox-SN4700-C128
Requirements:
* Breakout: Port 1-32: 4x100G
* Downlinks: 120 (1-30)
* Uplinks: 8 (31-32)
* Shared Headroom: Enabled
* Over Subscribe Ratio: 1:8
* Default Topology: T2
* Default Cable Length for T2: 1500m
* QoS params: The default ones defined in qos_config.j2 will be applied
* Small Packet Percentage: Used 50% for traditional buffer model Note: For dynamic model, the value defined in LOSSLESS_TRAFFIC_PATTERN|AZURE|small_packet_percentage is used
Additional Details:
Switch Type has to be programmed as SpineRouter through config_db.json in DEVICE_METADATA|localhost|type field for the buffer values & cable lengths defined in the buffers_defaults_t2.j2 to apply on the device
Cable Lengths Used for generating buffer_defaults_{t0,t1,t2}.j2 values
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
2 things are missing in current allow-prefix list implementation.
In some usecase, need to tell the BGP neighbor and have different allow-prefix list for different neighbors, which is not supported.
for the prefix list, can't support flexible le and ge.
How I did it
To enhance the bgp allow-prefix list feature to have:
To include the neighbor type info for the allow-prefix list.
To support flexible le and ge length for allow-prefix list.
How to verify it
4 new unit test cases are added in this PR to cover changes.
When using trap on SIGTERM the script will not react to the SIGTERM signal sent while a child is executing.
I.e, the following script does not react on SIGTERM sent to it if it is
waiting for sleep to finish:
```
trap "echo Handled SIGTERM" 0 2 3 15
echo "Before sleep"
sleep inf
echo "After sleep"
```
Instead, trap only on EXIT which covers also a scenario with exit on
SIGINT, SIGTERM.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
* Advance sonic-utilities pointer
7919077f Add FEC correctable and uncorrectable port stats (#2027)
ecb91367 Add CLI to configure YANG config validation (#2147)
e9ab5235 Add override testcase to verify removal (#2288)
c6794b55 Fix version in db_migrator for `PORT_QOS_MAP|global` (#2289)
92b889b7 [intfutil] Check whether the FEC mode is supported on the platform before configuring it to CONFIG_DB (#2223)
dab0d065 Transfer organization from Azure to sonic-net (#2284)
6de18a1d [watermarkstat] Fix CLI script for unconfigured PG counters (#2239)
ac2f5530 Improve the way to check port type of RJ45 port (#2249)
142185c9 Fix the issue that sonic_platform is not installed on vs image (#2300)
ca14133f [crm] add checking for CRM interval range (#2293)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Advance swss
dc8bc1c4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)
6565b502 Revert "[portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2333)" (#2396)
dc88d55d Revert hwinfo count change (#2383)
75fc9659 [DualToR] Handle race condition between tunnel_decap and mux orchestrator (#2397)
525a57fa Fix for remote system interface not getting created (#2364)
3161eaae portsorch: initial support for link-training (#2359)
dc477fb0 [swss/cfgmgr] teammgr configure lacp rate (#2121)
2489ad57 Improve pytest speend by grouping 20 tests together. (#2390)
168bd3b3 [EVPN]Modified tunnel creation logic when creating tunnel in VRF-VNI map creation flow (#2404)
1e1438e4 [portsorch] Expose supported FEC modes to STABE_DB and check whether FEC mode is supported before setting it (#2400)
9f2e27b4 [QoS] Fix issue: the WRED profile can not be set if current min > new max or current max < new min (#2379)
d36c17d6 [asan][aclorch] fix a memory leak in the SaiAttrWrapper::swap() (#2382)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* More sonic-utilities PRs
be1866fd Fix GCU bug when backend service modifying config (#2295)
bcf36eb3 Fix issues for sonic_installer upgrade-docker and sonic_installer rollback-docker (#2278)
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Add PSU input voltage and input current to mlnx platform api.
- How I did it
Implement 2 function of getting the psu voltage and psu current input:
Get the values from "power/psu{}_curr_in" , "power/psu{}_volt_in"
- How to verify it
Manual test.
Run sonic-mgmt regression
Signed-off-by: orfar1994 <orfar1994@gmail.com>
- Why I did it
Add new sensor conf file to support respined platforms(SN3700/SN3700C/SN4600C)
- How I did it
Add new sensor conf
Update the get_sensors_conf_path scripts to apply the sensor conf according to the HW respin version info
- How to verify it
run platform test(including sensor test)
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Update sonic-platform-daemons submodule pointer to include the following:
Xcvrd changes to support 400G ZR configuration (#270)
[ycabled] add secure channel support for grpc dualtor active-active connectivity (#275)
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-swss-common submodule pointer to include the following:
Add docker-mux related table names (#627)
Transfer organization from Azure to sonic-net (#656)
Signed-off-by: dprital <drorp@nvidia.com>
Update sonic-platform-common submodule pointer to include the following:
[eeprom] Add UT for eeprom_tlvinfo.py (#292)
Fix Cmis memmap field offset (#290)
Fix AttributeError for "sfputil show error-status -hw" (#291)
At SWSS docker init time, check the device subtype and enable tunnel packet handler only if it is dualtor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
In arp_update, check for FAILED or INCOMPLETE kernel neighbor entries and manually ping them to try and resolve the neighbor
Signed-off-by: Lawrence Lee <lawlee@microsoft.com>
Why I did it
The initial value has to be present for the state machines to work. In active-standby dual-tor scenario, or any hardware mux scenario, the value will be updtaed eventually with a delay.
However, in active-active dual-tor scenario, there is no other mechanism to initialize the value and get state machines started.
So this script will have to write something at start up time.
For active-active dualtor, 'active' is a more preferred initial value, the state machine will switch the state to standby soon if
link prober found link not in good state.
How I did it
Update the script to always provide initial values.
How to verify it
Tested on active-active dual-tor testbed.
Signed-off-by: Ying Xie ying.xie@microsoft.com
- Why I did it
Add more log while doing sysfs reading to increase the debug capability
- How I did it
Log the relevant file path and error number while sysfs reading return None
- How to verify it
Manual test
Why I did it
Fix CVE-2017-1000487 alert in thrift 0.14.1.
See https://nvd.nist.gov/vuln/detail/CVE-2017-1000487
How I did it
Change the version of org.codehaus.plexus:plexus-utils from 3.0.14 to 3.0.16.
24f505148 [eloop.c]: Increase timeout of signal termination (#62)
2b2c1ad72 [driver_macsec_sonic.c]: Fixbug: a wrong db_wait in delete sa (#61)
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
The default stable version of rsyslog on bullseye has a bug about rate limit. It causes rate limit not work. The bug has been fixed on backport version 8.2206.0-1~bpo11+1.
Buster has no such issue.
#### How I did it
Upgrade rsyslog from 8.2110.0 to 8.2206.0-1~bpo11+1
#### How to verify it
Manual test
*The initial commit for the P4RT docker hard coded all the flags which makes it difficult to configure at runtime. Reading them from the CONFIG_DB allows for more flexibility.
Why I did it
Building docker-sonic-vs requires dependencies installed in sonic-slave-buster
How I did it
Add libs to sonic-slave-buster and sonic-slave-bullseye
How to verify it
Check files
*Preventing ebtables rules to be applied on KVM image. The ebtables rules in SONiC are added to prevent ARP as well as L2 forwarding to be blocked in linux kernel since the hardware will take care of the actual L2 forward. However this is not the case with KVM where linux needs to forward even L2 packets
Why I did it
Upgrade sonic fips packages to version 0.2
Upgrade openssl version from 1.1.1k-1+deb11u1+fips to 1.1.1n-0+deb11u3+fips
Upgrade openssh version from 8.4p1-5+fips to 8.4p1-5+deb11u1+fips
How I did it
Change the makefile.
ping command is not working inside PMON docker (bullseye)
Use case: chassisd checks for module reachability inside PMON for "show chassis modules midplane-status" CLI, and on Cisco chassis, this uses ping command to check network reachability
#### Why I did it
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
#### How I did it
Change flush_unused_database code to use swsscommon API:
Change get_instancelist to getInstanceList.
Change get_dblist to getDbList.
#### How to verify it
Pass all E2E test.
Manually check syslog make sure error log not exist and swss, syncd, bgp service started.
Search code in Azure make sure there all similer case are fixed in this PR.
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Fix docker-database flush_unused_database failed issue: https://github.com/Azure/sonic-buildimage/issues/11597
When change flush_unused_database from use swsssdk to use swsscommon, get_instancelist() and get_dblist() name changed but not update.
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
#### Why I did it
Update bgpmon.py from py-swsssdk to swsscommon
#### How I did it
Change bgpmon.py to use swsscommon.
#### How to verify it
Pass all E2E test case
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
#### Description for the changelog
Update bgpmon.py from py-swsssdk to swsscommon
#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
To reduce rc.local script execution time. Porting changes from [DellEMC] S6100 Platform Service optimization #10989
Changes:
Moving platform-modules-s6100.service and s6100-lpc-monitor.service asynchronous to rc.local script.
#### Why I did it
Submodule update for sonic-swss-common with following change:
```
2247dbe 2022-08-01 | Fix memory leak issue in ConfigDBConnector. (#655) [Hua Liu]
4af97d6 2022-07-27 | Add new table schemas for DASH (#654) [prabhataravind]
d72e5ea 2022-07-23 | Fix epoll and socket resource leak issue. (#651) [Hua Liu]
dda857b 2022-07-21 | Microsoft mandatory file (#620) [microsoft-github-policy-service[bot]]
4132d14 2022-07-21 | Fix PING database command not backward compatible with python version issue. (#650) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-swss-common with following change:
```
2247dbe 2022-08-01 | Fix memory leak issue in ConfigDBConnector. (#655) [Hua Liu]
4af97d6 2022-07-27 | Add new table schemas for DASH (#654) [prabhataravind]
d72e5ea 2022-07-23 | Fix epoll and socket resource leak issue. (#651) [Hua Liu]
dda857b 2022-07-21 | Microsoft mandatory file (#620) [microsoft-github-policy-service[bot]]
4132d14 2022-07-21 | Fix PING database command not backward compatible with python version issue. (#650) [Hua Liu]
```
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
#### Why I did it
The %%EXTRA_CMDLINE_LINUX%% is not replaced to the real value, it has impact on the kernel parameter settings.
See the log sonic-vs.img.gz.log in the latest master build. In the grub.cfg, the %%EXTRA_CMDLINE_LINUX%% is set in the linux command line.
```
Installing for i386-pc platform.
Installation finished. No error reported.
Switch CPU vendor is: GenuineIntel
Switch CPU cstates are: disabled
EXTRA_CMDLINE_LINUX=%%EXTRA_CMDLINE_LINUX%%
Installed SONiC base image SONiC-OS successfully
ONIE: NOS install successful: file://dev/vdb/onie-installer.bin
```
