#### Why I did it
src/sonic-gnmi
```
* 6fd461c - (HEAD -> master, origin/master, origin/HEAD) Get origin from prefix (#149) (17 hours ago) [ganglv]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
Enabling kdump by default for cisco-8000 by setting crashkernel cmdline arg in device installer.conf.
After bootup, sonic-kdump-config wipes crashkernel arg from /host/grub/grub.cfg, and resets USE_KDUMP in /etc/default/kdump-tools, so kdump will not be enabled on subsequent reboot.
How I did it
Setting kdump enable config as part of init_cfg.json for cisco-8000 platforms.
How to verify it
Install SONiC image with kdump enabled by default (device/hwsku/installer.conf), then reboot.
Kdump config should persist on subsequent reboots and kdump loaded during bootup
Signed-off-by: Aman Singhal <amans@cisco.com>
Why I did it
There are many automation PRs pending for PR checker failure issue.
As PR number grows, github api to list prs comes to its limit.
We need to monitor and send alert for these PRs.
Work item tracking
Microsoft ADO (number only): 25064441
How I did it
For auto-cherry pick PRs:
- more than 3 days, comment @author to check
- more than 10 days, stop comment.
- more than 28 days, comment @author PR will be closed
- more than 30 days, close PR
For submodule update HEAD PRs:
- more than 3 days, send alert(submodule PR)
How to verify it
Which release bra
* Change the CAK key length check in config plugin, macsec test profile changes
* Fix the format in add_profile api
The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.
### Why I did it
The json.hpp header file from that package is used in the sonic-swss-common build. An old version of that header file (from 2016) has been checked into the sonic-swss-common repo. However, since then, there have been changes to that header file, and starting with GCC 12 in Bookworm, generates some errors about variables being possibly uninitialized before use.
##### Work item tracking
- Microsoft ADO **(number only)**: 25027439
#### How I did it
To fix this, install the nlohmann-json3-dev package, and allow using the header file from the Debian package instead of a static checked-in version. The version in Debian Bullseye is much newer than this version.
#### How to verify it
With this change alone, sonic-swss-common will still be using the json.hpp file in its own codebase. The change to actually use the system header file instead of the local header file will happen in a separate PR in the necessary repoes.
### Why I did it
We're not adding any patch on top of hiredis, and there's no apparent reason to build this. Remove the build step here, and just install the package from the Debian repos.
##### Work item tracking
- Microsoft ADO **(number only)**: 24381590
#### How to verify it
Build the SONiC image, and load it. Verify that services come up.
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
There is no reason to build deb package ethtool from source code.
We can install the same version from Debian bullseye mirror.
How I did it
Remove ethtool Makefiles from sonic-buildimage.
Install ethtool via apt-get in pmon container.
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.
We now disable the i801 driver interrupt and instead enable polling
Microsoft ADO (number only): 24910530
How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver
How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-
- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3
Signed-off-by: Prince George <prgeor@microsoft.com>
Why I did it
Support DHCP/DHCPv6 per-interface counter, code change in sonic-build image.
Work item tracking
Microsoft ADO (17271822):
How I did it
- Introduce libjsoncpp-dev in dhcpmon and dhcprelay repo
- Show CLI changes after counter format change
How to verify it
- Manually run show command
- dhcpmon, dhcprelay integration tests
### Why I did it
1. Enhance the diagnosis information collecting mechanism
- If the option `-v` is fed, it will pass additional diagnosis flags to mlxfwmanager
- Collect all the output from mlxfwmanager and print them to syslog if it fails
2. Abort syncd in case waiting for device or upgrading firmware fails
Signed-off-by: Stephen Sun <stephens@nvidia.com>
### How I did it
#### How to verify it
Regression and manual test
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.
- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
#### Why I did it
src/sonic-linux-kernel
```
* 7ee50c9 - (HEAD -> master, origin/master, origin/HEAD) [Mellanox] Upstream kernel patches with HW-MGMT 7.0030.1011 (#327) (29 hours ago) [Kebo Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-daemons
```
* c1c43f6 - (HEAD -> master, origin/master, origin/HEAD) [pmon][chassis][voq] Chassis DB cleanup when module is down (#394) (2 days ago) [vganesan-nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
To avoid errors when the sfputil show error-status -hw is called from the host OS (not from the pmon docker).
How I did it
Remove the self.sdk_handle parameter from the _get_module_info() function.
How to verify it
Execute the sfputil show error-status -hw
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
Running the Redis server as the "root" user is not recommended. It is suggested that the server should be operated by a non-privileged user.
Work item tracking
Microsoft ADO (number only): 15895240
How I did it
Ensure the Redis process is operating under the 'redis' user in supervisord and make redis user own REDIS_DIR inside db container.
How to verify it
Built new image, verify redis process is running as 'redis' user and all containers are up.
Signed-off-by: Mai Bui <maibui@microsoft.com>
Why I did it
This change is to help us running SSH config generation for our testbed in mgmt container.
Original PR in sonic-mgmt repo can be found here: sonic-net/sonic-mgmt#9773.
Work item tracking
Microsoft ADO (number only): 25007799
How I did it
Updating sonic-mgmt docker file to add sshconf 0.2.5 into pip install under venv.
Why I did it
Support Intel Tofino based platforms Netberg Aurora 750
ASIC: Intel Tofino BFN-T10-064Q
Pors: 64x 100G
How I did it
Added specification to device/netberg directory
Added platform/barefoot/sonic-platform-modules-netberg contains kernel modules, scripts and sonic_platform packages.
Modified the platform/barefoot/platform-modules-netberg.mk to include Aurora 750 related ID.
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
chassis-packet: Update arp_update script for FAILED and STALE check (#16311)
1. Fixing an issue with FAILED entry resolution retry.
Neighbor entries in arp table may sometimes enter a FAILED state when the far end is down and reports the state as follows:
2603:10e2:400:3::1 dev PortChannel19 router FAILED
While the arp_update script handles the entries for FAILED in the following format, the above was not handled due to the token location (extra router keyword at index 4):
2603:10e2:400:3::1 dev PortChannel19 FAILED
The former format may appear if an arp resolution is tried on a link that is known but the far end goes down, e.g., pinging a STALE entry while the far end is down.
2. Refreshing STALE entries to make sure the far end is reachable.
STALE entries for some backend ports may appear in chassis-packet when no traffic is received for a while on the port. When the far end goes down, it is expected for BFD to stop sending packets on the session for which the far end is not reachable. But as the entry is known as stale, on the Cisco chassis, BFD keeps sending packets. Refreshing the stale entry will keep active links as reachable in the neighbor table while the entries for the far end down will enter a failed state. FAILED state entries will be retired and entered reachable when far end comes back up.
* Fix the Loopback0 IPv6 address of LC's in chassis not reachable from peer device's
* Assign the metric vaule for Ipv6 default route learnt via RA message to higher value so that BGP learnt default route is higher priority.
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
* [chassis]Chassis DB cleanup when asic comes up
Cleanup the entries from the following tables in chassis app db in
redis_chassis server in the supervisor
(1) SYSTEM_NEIGH
(2) SYSTEM_INTERFACE
(3) SYSTEM_LAG_MEMBER_TABLE
(4) SYSTEM_LAG_TABLE
As part of the clean up only those entries created by the asic that
is coming up are deleted. The LAG IDs used by the asics are also
de-allocated from SYSTEM_LAG_ID_TABLE and SYSTEM_LAG_ID_SET
- Added check to run the chassis db clean up only for voq switches.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
### Why I did it
Need a tool to check certificate's detail of information.
##### Work item tracking
- Microsoft ADO **(number only)**: 25020260
#### How I did it
Install pyOpenSSL package for k8s master
#### How to verify it
Pip3 list to check whether it's installed when include_kubernetes_master=y
#### Why I did it
To enable qos config for a certain backend deployment mode, for resource-type "Compute-AI".
This deployment has the following requirement:
- Config below enabled if DEVICE_TYPE as one of backend_device_types
- Config below enabled if ResourceType is 'Compute-AI'
- 2 lossless TCs' (2, 3)
- 2 lossy TCs' (0,1)
- DSCP to TC map uses 4 DSCP code points and maps to the TCs' as follows:
"DSCP_TO_TC_MAP": {
"AZURE": {
"48" : "0",
"46" : "1",
"3" : "3",
"4" : "4"
}
}
- WRED profile has green {min/max/mark%} as {2M/10M/5%}
This required template change <as in the PR> in addition to the vendor qos.json.j2 file (not included here).
### How I did it
#### How to verify it
- with the above change and the vendor config change, generated the qos.json file and verified that the objective stated in "Why I did it" was met
- verified no error
### Description for the changelog
Update qos_config.j2 for Comptue-AI deployment on one of backend device type roles
#### Why I did it
To fix the logic introduced by [[memory_checker] Do not check memory usage of containers which are not created #11129](https://github.com/sonic-net/sonic-buildimage/pull/11129).
There could be a scenario before the reboot, where
1. The `docker service` has stopped
2. In a very short period of time, the monit service performs the `root@sonic:/home/admin# monit status container_memory_telemetry`
In such scenario, the `memory_checker` script will throw an error to the syslog:
```
ERR memory_checker: Failed to retrieve the running container list from docker daemon! Error message is: 'Error while fetching server API version: ('Connection aborted.', FileNotFoundError(2, 'No such file or directory'))'
```
But, actually, this scenario is a correct behavior, because when the docker service is stopped, the Unix socket is destroyed and that is why we could see the `FileNotFoundError(2, 'No such file or directory'` exception in the syslog.
#### How I did it
Change the log severity to the warning and changed the return value.
#### How to verify it
It is really hard to catch the exact moment described in the `Why I did it` section.
In order to check the logic:
1. Change the Unix socket path to non-existing in [/usr/bin/memory_checker](47742dfc2c/files/image_config/monit/memory_checker (L139)) file on the switch.
2. Execute the `root@sonic:/home/admin# monit restart container_memory_telemetry`
3. Check the syslog for such messages:
```
WARNING memory_checker: Failed to retrieve the running container list from docker daemon! Error message is: 'Error while fetching server API version: ('Connection aborte
d.', FileNotFoundError(2, 'No such file or directory'))'
INFO memory_checker: [memory_checker] Exits without checking memory usage since container 'telemetry' is not running!
```
Why I did it
Fixes#15803
In SONiC chassis, routes have recursive nexthop resolution when the routes are learnt from remote linecard.
In some cases after recursive nexthop resolution the number of nexthop for a route could reach 256.
Zebra ran out of space when filling up 256 nexthops which causes zebra crash.
Work item tracking
Microsoft ADO (24997365):
How I did it
Create a patch to port FRRouting/frr#14096 which has change to ignore duplicate nexthop when filling up fpm message
Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Why I did it
Revise lable name and fix typo in sensor.conf of 4600C
- How I did it
Revise lable name and fix typo in sensor.conf of 4600C
- How to verify it
Manual test
sonic-mgmt test_sensors.py
Why I did it
This is a fix for PR [kernel] Change grub cmdline to set c-states to 0 for "Intel" CPUs by shlomibitton · Pull Request #6051 · sonic-net/sonic-buildimage (github.com)
The original PR will disable intel idle driver but it cannot limit the max c-state to 1 due to system will fall back to acpi idle driver.
Currently intel_idle.max_cstate=0 is already present, which will disable intel idle driver. With the added option, common idle driver will be disabled as well, so there will not be idle management. This is to prevent a bug that can be triggered by idle instruction on intel platform.
How I did it
Add the option to installer file beside intel_idle.max_cstate=0
What I did it
Add new platform arm64-ragile_ra-b6010-48gt4x-r0 (Centec)
ASIC Vendor: Centec
Switch ASIC: Centec
Port Config: 48x1G+4x10G
Why I did it
Add new platform RA-B6010-48GT4X
How I did it
Add new platform RA-B6010-48GT4X
Signed-off-by: pettershao-ragilenetworks <pettershao@ragilenetworks.com>
#### Why I did it
src/sonic-linux-kernel
```
* 1800d11 - (HEAD -> master, origin/master, origin/HEAD) AMD-Pensando ELBA SOC support (#322) (23 hours ago) [Ashwin Hiranniah]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
docker folder size on 202305 image is more than 1.5G. larger than the max size of docker ramfs size.
Work item tracking
Microsoft ADO (number only):
24969589
How I did it
Update the docker ramfs size from 1500M to 2500M
How to verify it
Boot 202305 image.
#### Why I did it
src/sonic-snmpagent
```
* af2d5a4 - (HEAD -> master, origin/master, origin/HEAD) Fix FdbUpdater crash when SAI_FDB_ENTRY_ATTR_BRIDGE_PORT_ID attribute missing. (#286) (19 hours ago) [Hua Liu]
```
#### How I did it
#### How to verify it
#### Description for the changelog
How I did it
Fix the regex for L4 port range in openconfig_acl.py.
How to verify it
Build image and install on Arista-720DT DUT, then try the repro steps in #16189 and confirmed the ACL rule be setup correctly:
What I did:
Added flag in sonic_version.yml to see if compiled image is secured or non-secured. This is done using build/compile time environmental variable SECURE_UPGRADE_MODE as define in HLD: https://github.com/sonic-net/SONiC/blob/master/doc/secure_boot/hld_secure_boot.md
This flag does not provide the runtime status of whether the image has booted securely or not. It's possible that compile time signed image (secured image) can boot on non secure platform.
Why I did:
Flag can be used for manual check or by the test case.
ADO: 24319390
How I verify:
Manual Verification
---
build_version: 'master-16191.346262-cdc5e72a3'
debian_version: '11.7'
kernel_version: '5.10.0-18-2-amd64'
asic_type: broadcom
asic_subtype: 'broadcom'
commit_id: 'cdc5e72a3'
branch: 'master-16191'
release: 'none'
build_date: Fri Aug 25 03:15:45 UTC 2023
build_number: 346262
built_by: AzDevOps@vmss-soni001UR5
libswsscommon: 1.0.0
sonic_utilities: 1.2
sonic_os_version: 11
secure_boot_image: 'no'
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
