- Why I did it
Update HW-MGMT to V.7.0020.3006
1. Support new system SN2201
2. Add COMEX BRDWL respin support
- How I did it
Update the version number of the makefile
Advance the hw-mgmt submodule pointer
- How to verify it
Run full regression on Nvidia platforms
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Add more log while doing sysfs reading to increase the debug capability
- How I did it
Log the relevant file path and error number while sysfs reading return None
- How to verify it
Manual test
To reduce rc.local script execution time. Porting changes from [DellEMC] S6100 Platform Service optimization #10989
Changes:
Moving platform-modules-s6100.service and s6100-lpc-monitor.service asynchronous to rc.local script.
- Why I did it
Fix bug: pmon report error on start up because some SKUs do not have hwsku.json
- How I did it
If hwsku.json, do not extract RJ45 port information
- How to verify it
Manual test.
Unit test.
- Why I did it
Support get_port_or_cage_type for RJ45 ports
- How I did it
Implement the new platform API get_port_or_cage_type
Fix the issue: unable to import SFP when chassis object is destructed
- How to verify it
Manually test and regression test
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Support new platform SN2201 and RJ45 port
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* remove unused import and redundant function
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* fix error introduced by rebase
Signed-off-by: Kebo Liu <kebol@nvidia.com>
* Revert the special handling of RJ45 ports (#56)
* Revert the special handling of RJ45 ports
sfp.py
sfp_event.py
chassis.py
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove deadcode
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Support CPLD update for SN2201
A new class is introduced, deriving from ComponentCPLD and overloading _install_firmware
Change _install_firmware from private (starting with __) to protected, making it overloadable
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Initialize component BIOS/CPLD
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove swb_amb which doesn't on DVT board any more
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Remove the unexisted sensor - switch board ambient - from platform.json
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Do not report error on receiving unknown status on RJ45 ports
Translate it to disconnect for RJ45 ports
Report error for xSFP ports
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Add reinit for RJ45 to avoid exception
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <5379172+stephenxs@users.noreply.github.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
Give more room for the kernel image in memory
Change-Id: I015856d173d50d94e30d8c555590efb70eb712ae
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
- Why I did it
Advance to new SAI version for bugs fixes as well as new features/enhacements:
New:
1. ARM64 support
2. FG ECMP performance optimization
3. Support setting empty list for port ingress/egress buffer profile list
4. Add service port for SN5600
5. Add CR8/SR8/LR8/KR8 interface type
6. Disable mlxtrace during debug dump
Fixes:
1. Fix SAI_ACL_ENTRY_ATTR_FIELD_TC
2. Fix Packets loop back if no member in portchannel
3. Fix optimize descriptors apply time (and fast boot time)
4. Add flush fdb entries for vxlan tunnel bridge port
5. Don't disable used tunnel underlay interfaces
- How I did it
Advanced SAI submodule
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
* [Mellanox]Check dmi file permission before access (#11309)
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
- Why I did it
This is for the eventual support of multiple architectures for the mellanox platform.
- How I did it
Change the location of the binaries in Switch-SDK-drivers so that the path specifies the target architecture in addition to the target distribution that the debians are built for.
This is the most straightforward way to separate binaries built against different architectures and selectively target them for installation in the mellanox SONiC image.
- How to verify it
Build SONiC for mellanox and verify it compiles successfully.
Signed-off-by: Sudharsan Dhamal Gopalarathnam sudharsand@nvidia.com
Why I did it
During the system boot up when 'show platform status' or 'show version' command is executed before STATE_DB CHASSIS_INFO table is populated, the show will try to fallback to use the platform API. The DMI file in mellanox platforms require root permission for access. So if the show commands are executed as admin or any other user, the following error log will appear in the syslog
Jun 28 17:21:25.612123 sonic ERR show: Fail to decode DMI /sys/firmware/dmi/entries/2-0/raw due to PermissionError(13, 'Permission denied')
How I did it
Check the file permission before accessing it.
How to verify it
Added UT to verify. Manually verified if the error log is not thrown.
- Why I did it
To include latest fixes:
1. Warmboot | When trying to reconfigure the Flex Parser header and Flex transition parameters after ISSU, the switch will returned an error even if the configuration was identical to that done before performing the ISSU.
2. Link Up | When toggling many ports of the Spectrum devices while raising 10GbE link up and link maintenance is enabled, the switch may get stuck and may need to be rebooted.
3. Shared buffer | While moving from lossless to lossy while shared headroom was used, reduction of the shared headroom can only be done prior to pool type change and when shared headroom is not utilized.
- How I did it
Updated SDK submodule along with the relevant Makefiles
- How to verify it
Build an image and run tests from "sonic-mgmt".
Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it
To provide an ability to suppress ASAN false positives and have a clean ASAN report for docker-sonic-vs/mlnx-syncd/orchagent docker
- How I did it
Added the "print_suppressions=0" to ASAN configs.
- How to verify it
add a suppression to some ASAN-enabled component (the suppression should catch some leak)
build with ENABLE_ASAN=y
run a test and see that the ASAN report is empty instead of having the suppression summary
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
To ensure that ASAN logs are always generated. Currently, the way to get the logs is to map the "/var/log/asan" outside of a container, which doesn't work for DVS test run with "--imgname" option.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
This fixes the build for armhf to be able to use '/device///installer.conf' files. Specifically, armhf needs support to be able to change the size of /var/log/ directory. It is hardcoded to 512 bytes on all armhf platforms currently. This change will allow any armhf platform to be able to use an installer.conf file to customize the installed image.
- Why I did it
"import sonic_platform" takes about 600ms ~ 1000ms, it is kind of slow. After this optimization, the time is about 100ms. The benefit is that those CLIs which does not need the slow import sentence would be faster than before.
- How I did it
Find slow import and call them when need.
- How to verify it
Measure the import time.
Currently, the build with ASAN_ENABLE=y reuses the packages built with
ASAN_ENABLE=n (and vice versa). To address this issue, ASAN_ENABLE is added to DEP_FLAGS for asan-enabled packages (docker-syncd-mlnx, syncd, docker-orchagent, swss).
- Why I did it
To make dpkg cache use/rebuild the packages for ASAN_ENABLE=y/n.
- How I did it
Added ASAN_ENABLE to the DEP_FLAGS for asan-enabled packages.
- How to verify it
Built with ASAN_ENABLE=y/n and checked the .flags .log files.
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
This is to improve the readability of ASAN reports. The debug package adds function names and source code references to the backtrace (currently, there are only binary addresses of functions)
Another way to address this issue is to build the image with "INSTALL_DEBUG_TOOLS=y". The downside of this approach is that the image size and compilation time are unnecessarily big. Also, the idea is to make the "ENABLE_ASAN" self-sufficient, which would not be the case for this approach.
- Why I did it
To improve the readability of asan logs.
- How I did it
Added SYNCD_DBG and SWSS_DBG to corresponding docker images for ASAN_ENABLE=y build
- How to verify it
Add artificial memory leak
Build with ASAN_ENABLE=y
Test the image and check the ASAN report
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
Update MFT to newer version
- How I did it
Update MFT_VERSION in platform/mellanox/mft.mk
- How to verify it
Check version via dpkg -l | grep mft
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Why I did it
add celestica belgite platform
How I did it
add belgite platform in celestica
Co-authored-by: nicwu-cel <nicwu@celestica.com>
Co-authored-by: anjian <anjian@celestica.com>
Co-authored-by: sandycelestica <sandyli@celestica.com>
This update has following changes
Refactor pci topology logic for chassis (fixes some chassis commands and chassisd on linecard)
Introduce new cooling algorithm
Fix linecard poweroff logic when supervisor is going down
Fix linecard status led leading to system-health crashing
Misc fixes
- Why I did it
Script fails when there is an exception while reading
- How I did it
Add more logs and checks. Fix wrong variable naming and messages.
- How to verify it
Provoke exception while read_eeprom() and check that it is handled properly
Why I did it
To include ONIE version in show platform firmware status command output in DellEMC S6100 and Z9332f platforms.
How I did it
Include ‘ONIE’ in the list of components provided by platform APIs in DellEMC S6100 and Z9332f.
Unmount ONIE-BOOT if mounted using fast/soft/warm-reboot plugins in DellEMC S6100.
Fixes#9279
- Why I did it
Part of larger effort to move all SONiC systems to bullseye
- How I did it
1. Update container makefiles with correct dependencies
2. Update container Dockerfile with correct base image
3. Update container Dockerfile with correct apt dependencies
4. Update any other makefiles with dependencies to remove python2 support
5. Minor changes to support bullseye / python3
- How to verify it
Run regression on the switch:
1. Verify PTF community tests work
2. Verify syncd runs and all ports come up / pass traffic
3. Verify all platform tests succeed
Update SDK/FW to 4.5.1500/2010.1500 and SAI version to 1.21.1.1
SDK/FW features:
1. Added support for Finisar DR4 (FTCD4523E2PCM) on Spectrum-2 and Spectrum-3 systems.
SAI Features:
1. ECMP overlay support for IPv6
2. BFD offloading / 4K scale
3. Host interface user traps + improved trap registration (table entry)
4. gcc11 compilation fixes
5. Read support for ACL redirect action
6. Optimize ECMP DB size
7. Buffer descriptors new defaults
8. Updated port mapping for SN2201
SAI Fixes:
1. Debug counter removal when configured with all drop reasons
- Why I did it
Upgrade Mellanox SDK and SAI versions to latest
- How I did it
Updated submodule pointers
- How to verify it
Regression tested
Currently, the build dockers are created as a user dockers(docker-base-stretch-<user>, etc) that are
specific to each user. But the sonic dockers (docker-database, docker-swss, etc) are
created with a fixed docker name and common to all the users.
docker-database:latest
docker-swss:latest
When multiple builds are triggered on the same build server that creates parallel building issue because
all the build jobs are trying to create the same docker with latest tag.
This happens only when sonic dockers are built using native host dockerd for sonic docker image creation.
This patch creates all sonic dockers as user sonic dockers and then, while
saving and loading the user sonic dockers, it rename the user sonic
dockers into correct sonic dockers with tag as latest.
docker-database:latest <== SAVE/LOAD ==> docker-database-<user>:tag
The user sonic docker names are derived from 'DOCKER_USERNAME and DOCKER_USERTAG' make env
variable and using Jinja template, it replaces the FROM docker name with correct user sonic docker name for
loading and saving the docker image.
Why I did it
Migrate ptftests script to python3, in order to do an incremental migration, add python virtual environment firstly, install all required python packages in virtual env as well.
Then migrate ptftests scripts from python2 to python3 one by one avoid impacting non-changed scripts.
Signed-off-by: Zhaohui Sun zhaohuisun@microsoft.com
How I did it
Add python3 virtual environment for docker-ptf.
Add submodule ptf-py3 and install patched ptf 0.9.3 into virtual environment as well, two ptf issues were reported here:
p4lang/ptf#173p4lang/ptf#174
Signed-off-by: Zhaohui Sun <zhaohuisun@microsoft.com>
On vs platform, egress_lossless_pool's mode is static.
So the corresponding profile should be of static_th as well.
Signed-off-by: Stephen Sun <stephens@nvidia.com>
* Optimize dx010 sonic platform init script to speed up init process
* Merge issue #10152: [warm-upgrade][202012] Slow Celestica platform init
in rc.local causes lacp-teardown fix into master branch
Signed-off-by: Eric Zhu <erzhu@celestica.com>
- Why I did it
To support docker-sonic-vs image with ASAN.
- How I did it
1. Made the supervisord.conf a template
2. Added the 'log_path' environment variable for ASAN-enabled daemons
3. Added supervisord.conf.j2 generation and ASAN lib to the docker-sonic-vs/Dockerfile.j2
- How to verify it
1. Made a build with ENABLE_ASAN=y
2. Run the tests, checked ASAN reports
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
InvalidPsuVolWA.run might raise exception if user power off PSU when it is running. This exception is not caught and will be raised to psud which causes psud failed to update PSU data to DB.
- How I did it
1. Change the log level when WA does not work. This could happen when user power off PSU, hence changing the log level from error to warning is better
2. Change the wait time from 5 to 1 to avoid introduce too much delay in psud. 1 second is usually enough per my test
3. Give a default return value for function get_voltage_low_threshold and get_voltage_high_threshold to avoid exception reach to psud
- How to verify it
Manual test.
Run sonic-mgmt regression
Fix the issues #10501 and #9733
If having gearbox, we need:
* add gbsyncd as a peer since swss also has dependency on gbsyncd
* add service gbsyncd to FEATURE table if it is missing
- Why I did it
Implement newly added reboot causes in PR Azure/sonic-platform-common#277
- How I did it
Map the reboot cause sysfs to the newly added reboot causes.
- How to verify it
manual test, check whether the reboot cause is correct after rebooting the switch in various ways.
run the community reboot test to see whether the reboot cause checker is passing.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
The v0.7.5 has bug fix for the support of gearbox port and macsec counters. It also includes a owl firmware update with owl.lz4.fw.1.94.0.bin.
How I did it
Update credo sai url for v0.7.5
Update gearbox_config.json with using firmware owl.lz4.fw.1.94.0.bin instead of owl.lz4.fw.1.92.1.bin
How to verify it
Test gearbox port and macsec counter successfully on A7280.
Why I did it
To support address sanitizer for Mellanox syncd
How I did it
/var/log/asan is mapped for syncd container (the same as for swss)
container stop() has a timeout (60s) for syncd (the same as for swss)
This is so libasan has enough time to generate a report.
added ASAN's log path to Mellanox syncd supervisord.conf
added "asan: yes" to sonic_version.yml
How to verify it
Added artificial memory leaks
Compiled with ENABLE_ASAN=y
Installed the image on DUT
Rebooted the DUT
Verified that /var/log/asan/syncd-asan.log contains the leaks
Signed-off-by: Yakiv Huryk <yhuryk@nvidia.com>
- Why I did it
There is a hardware bug that PSU voltage threshold sysfs returns incorrect value. The workaround is to call "sensor -s" to refresh it.
- How I did it
Call "sensor -s" when the threshold value is not incorrect and PSU is "DELTA 1100"
- How to verify it
Unit test and Manual test
Why I did it
Prevent from i2c bus to get locked.
How I did it
Add sysfs driver to access ioport.
Command to reset i2c mux:
echo 1 > /sys/devices/platform/as9716_32d_ioport/i2c_mux_rst
Command to bring i2c mux out of reset:
echo 0 > /sys/devices/platform/as9716_32d_ioport/i2c_mux_rst
Signed-off-by: Brandon Chuang <brandon_chuang@edge-core.com>
Why I did it
For trident4/tomahawk4, linux_ngknet.ko and linux_ngknetcb.ko have to be installed. Also, the kernel modules to load on such chips are different from existing ones, so we add an option is_ltsw_chip to determine the kernel modules to load. The option is_ltsw_chip is controlled by adding 'is_ltsw_chip=1' to platform_env.conf or not.
How to verify it
We verified that existing platforms still work after this change; and for platforms with trident4/tomahawk4, we can load the different kernel modules as expected after adding 'is_ltsw_chip=1' to platform_env.conf
b67d479 Fixed the sfp refactor issue
827c5a6 Added nokia_cmd command nokia_common grpc support for power down/up SFM module
aeb7f56 Added the nokia cli commands for midplane
c57d083 Fix the get_my_module issue and the thermal_infos exception issue.
0536293 Change the output of "show chassis module status"
63212d7 Enhance the help display for nokia_cmd command
e8d2599 Fix the sonic_install_ndk_service script issue
d52bdcf Add command nokia_cmd show sfm-eeprom support
Signed-off-by: mlok <marty.lok@nokia.com>
* [BFN] Fix for run fwutil without sudo
SONiC has a concept of "platform components"
this may include - CPLD, FPGA, BIOS, BMC, etc.
These changes are needed to read the version of the BIOS and BMC component.
What I did
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
```
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
```
How I did it
Modification of dmidecode command
How to verify it
Run manually 'fwutil' (without sudo)
Previous command output had exception
New command output:
Root privileges are required
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Why I did it
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
How I did it
Modification of dmidecode command
How to verify it
Run manually 'fwutil' (without sudo)
Previous command output had exception
New command output:
Root privileges are required
Signed-off-by: Taras Keryk tarasx.keryk@intel.com
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* rewrite a call of dmidecode, when run without sudo
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Why I did it
The previous implementaion of component.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in <module>
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/__init__.py", line 3, in <module>
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 40, in <module>
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 159, in __init__
self.__platform = Platform()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/platform.py", line 21, in __init__
self._chassis = Chassis()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 48, in __init__
self.__initialize_components()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 136, in __initialize_components
component = Components(index)
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 184, in __init__
self.version = get_bios_version()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/component.py", line 19, in get_bios_version
return subprocess.check_output(['dmidecode', '-s', 'bios-version']).strip().decode()
File "/usr/lib/python3.9/subprocess.py", line 424, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
File "/usr/lib/python3.9/subprocess.py", line 505, in run
with Popen(*popenargs, **kwargs) as process:
File "/usr/lib/python3.9/subprocess.py", line 951, in __init__
self._execute_child(args, executable, preexec_fn, close_fds,
File "/usr/lib/python3.9/subprocess.py", line 1823, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'dmidecode'
The previous implementaion of eeprom.py expect fwutil run with sudo.
When fwutil run without sudo, there are an exception:
Traceback (most recent call last):
File "/usr/lib/python3.9/logging/config.py", line 564, in configure
handler = self.configure_handler(handlers[name])
File "/usr/lib/python3.9/logging/config.py", line 745, in configure_handler
result = factory(**kwargs)
File "/usr/lib/python3.9/logging/handlers.py", line 153, in init
BaseRotatingHandler.init(self, filename, mode, encoding=encoding,
File "/usr/lib/python3.9/logging/handlers.py", line 58, in init
logging.FileHandler.init(self, filename, mode=mode,
File "/usr/lib/python3.9/logging/init.py", line 1142, in init
StreamHandler.init(self, self._open())
File "/usr/lib/python3.9/logging/init.py", line 1171, in _open
return open(self.baseFilename, self.mode, encoding=self.encoding,
PermissionError: [Errno 13] Permission denied: '/var/log/platform.log'
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/bin/fwutil", line 5, in
from fwutil.main import cli
File "/usr/local/lib/python3.9/dist-packages/fwutil/init.py", line 3, in
from . import main
File "/usr/local/lib/python3.9/dist-packages/fwutil/main.py", line 41, in
pdp = PlatformDataProvider()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 162, in init
self.chassis_component_map = self.__get_chassis_component_map()
File "/usr/local/lib/python3.9/dist-packages/fwutil/lib.py", line 168, in __get_chassis_component_map
chassis_name = self.__chassis.get_name()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 146, in get_name
return self._eeprom.modelstr()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/chassis.py", line 54, in _eeprom
self.__eeprom = Eeprom()
File "/usr/local/lib/python3.9/dist-packages/sonic_platform/eeprom.py", line 50, in init
logging.config.dictConfig(config_dict)
File "/usr/lib/python3.9/logging/config.py", line 809, in dictConfig
dictConfigClass(config).configure()
File "/usr/lib/python3.9/logging/config.py", line 571, in configure
raise ValueError('Unable to configure handler '
ValueError: Unable to configure handler 'file'
How I did it
Modification call of dmidecode command.
Added modification of log files access attributes before file open operations.
How to verify it
Run manually 'fwutil' (without sudo)
New command output have no exception.
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Added file_check for checking access to log files for eeprom.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Removed unused import
* Added logfile_create to eeprom.py and chassis.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Created platform_utils.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* Added interpreter string to platform_utils.py
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
Why I did it
Support pddf to as4630/as7816/as7326
How I did it
Send needed file to the PR for these platform
How to verify it
Test sensors and show platform cmd.
root@as7326-56x-3:/home/admin# show platform psustatus
PSU Model Serial HW Rev Voltage (V) Current (A) Power (W) Status LED
PSU 1 FSF045-611 FSF0451912000505 N/A 12.06 5.50 66.00 OK green
PSU 2 FSF045-611 FSF0451912000568 N/A 12.00 5.50 66.00 OK green
root@as7326-56x-3:/home/admin# sensors
lm75-i2c-15-4a
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +35.5 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-4b
Adapter: i2c-1-mux (chan_id 6)
CPU Board Temperature: +29.0 C (high = +80.0 C, hyst = +75.0 C)
fan_ctrl-i2c-11-66
Adapter: i2c-1-mux (chan_id 2)
fan1: 9100 RPM
fan2: 9400 RPM
fan3: 9300 RPM
fan4: 9600 RPM
fan5: 9000 RPM
fan6: 9100 RPM
fan7: 9100 RPM
fan8: 9300 RPM
fan9: 9200 RPM
fan10: 9400 RPM
fan11: 9200 RPM
fan12: 9400 RPM
pch_haswell-virtual-0
Adapter: Virtual device
temp1: +43.0 C
psu_pmbus-i2c-17-59
Adapter: i2c-1-mux (chan_id 0)
in3: +12.06 V
fan1: 6272 RPM
temp1: +37.0 C
power2: 60.00 W
curr2: +6.00 A
lm75-i2c-15-49
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +40.0 C (high = +80.0 C, hyst = +75.0 C)
lm75-i2c-15-48
Adapter: i2c-1-mux (chan_id 6)
Main Board Temperature: +39.0 C (high = +80.0 C, hyst = +75.0 C)
psu_pmbus-i2c-13-5b
Adapter: i2c-1-mux (chan_id 4)
in3: +12.00 V
fan1: 6144 RPM
temp1: +36.0 C
power2: 66.00 W
curr2: +5.50 A
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 0: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 1: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 2: +50.0 C (high = +82.0 C, crit = +104.0 C)
Core 3: +50.0 C (high = +82.0 C, crit = +104.0 C)
Signed-off-by: Jostar Yang <jostar_yang@accton.com.tw>
DellEMC: N3248TE platform API2.0 changes
Why I did it
N3248TE Platform API 2.0 changes
How I did it
Implemented the functional API's needed for Platform API 2.0
Added system_health_monitoring_config.json file
How to verify it
Used the API 2.0 test suite to validate the test cases.
Co-authored-by: Arun LK <Arun_L_K@dell.com>
Why I did it
DellEMC : Added support for N3248TE/N3248PXE platforms
How I did it
Implemented the changes to enable/disable the watchdog support
How to verify it
watchdog_unit_test.txt
Co-authored-by: Arun LK <Arun_L_K@dell.com>
- Why I did it
Take new hw-mgmt release to SONiC, including:
New features:
1. hw-mgmt: add to PSU FW upgrade tool command to show current FW version
2. hw-mgmt: add to PSU FW upgrade tool support for single-PSU-in-the-system FW upgrade
3. hw-mgmt: add attribute “/firmware” to show FW version of restricted upgradable PSUs only
4. hw-mgmt: Add NVME temperature reports attributes (_alarm/_crit/_min/_max)
Bug fix:
1. psu: redundant i2c_addr attributes being created for psu 3 & 4 in system having only 2 psus.
2. hw-mgmt: in SPC1/2 i2c driver removal is too slow vs. ASIC reset causing non-functional log errors
3. PSU thresholds sysfs changed in 5.10 to “read only” preventing modification (modification required due PSU HW bug)
4. CPLD3 sysfs attribute missing after chip down/up flow
5. sysfs attributes missing when hw-mgmt is restarted (stop/start) within systemd
Release notes can be found from link https://github.com/Mellanox/hw-mgmt/blob/V.7.0020.2004/debian/Release.txt
- How I did it
Update hw-mgmt make file with new version number
Update hw-mgmt submodule pointer
- How to verify it
Run platform regression on all Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
- Why I did it
Implement read_eeprom/write_eeprom API for Credo Y-cable for Dual ToR Active-Standby
- How I did it
Use mlxreg utility for API implementation
Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
Why I did it
Support for show platform temp/fan for psu-temp and fan.
Original code doesn't has fan_drawer to support these information.
How I did it
Support for show platform temp/fan for psu-temp and fan.
Add fan_drawer.py and update thermal.py to add needed code.
It need PDDF common code to support . (Refer to #10213)
How to verify it
Test show platform temp and show platform fan.
root@as7726-32x-2:~# show platform fan
Drawer LED FAN Speed Direction Presence Status Timestamp
Fantray1 green Fantray1_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray1 green Fantray1_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_2 38% EXHAUST Present OK 20220311 08:13:04
N/A green PSU1_FAN1 23% EXHAUST Present OK 20220311 08:13:04
N/A green PSU2_FAN1 22% EXHAUST Present OK 20220311 08:13:04
root@as7726-32x-2:~# show platform temp
Sensor Temperature High TH Low TH Crit High TH Crit Low TH Warning Timestamp
PSU1_TEMP1 28 N/A N/A N/A N/A False 20220311 08:13:04
PSU2_TEMP1 25 N/A N/A N/A N/A False 20220311 08:13:04
TEMP1 23.5 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP2 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP3 24 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP4 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP5 24 80.0 N/A N/A N/A False 20220311 08:13:04
Co-authored-by: Jostar Yang <jostar_yang@accton.com.tw>
Why I did it
To reduce the processing time of rc.local, refactoring s6100 platform initialization.
Porting changes from 202012 branch [202012] Refactoring DELL platform init to reduce rc.local processing time #10171
Why I did it
Kernel hang in during early boot is caused due overwriting of device tree with uncompressing kernel. Added the fdt_high which gives a safe offset from kernel location.
How I did it
Setting uboot environment variable fdt_high.
How to verify it
Successful boot of bullseye kernel on Marvell Armada 380/385.
Change-Id: I3e2521780f5ecdb3bdf6cbb6542250814ca11959
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Why I did it
Removing incorrect check in plt setup for fw_env config: This check was added before to compare 2 different types of disk. Now the check is redundant and check is not required as transition is complete.
2)Removing legacy_volume_label in create_partition: legacy_volume_label is not used in armhf install files. With legacy_volume_label initialized to NULL, current code will always return true for check, if demo_part exits.
How I did it
Change is about removing the redundant/incorrect code explained above.
How to verify it
uboot fw_printenv and fw_setenv is tested
onie-nos-install has be verified.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
- Why I did it
Update NVIDIA Copyright header to "mellanox" files which were changed since 1.1.2022
- How I did it
Update the copyright header
- How to verify it
Sanity tests and PR checkers.
- Why I did it
Refactor SFP code to remove code duplication and to be able to use the latest features available in new APIs.
- How I did it
Refactor SFP code to remove code duplication and to be able to use the latest features available in new APIs.
- How to verify it
Run sonic-mgmt/platform_tests/sfp tests
The following changes are provided to support bullseye and the latest master
branch content.
- Accommodate relocated fan and thermal sysfs entries in bullseye
- Add support for chassis and PSU HW revision
Why I did it
Fix platform issues introduced by the bullseye kernel upgrade.
How I did it
Minor fixes to Nokia ixs7215 platform code
How to verify it
Execute the following CLI commands
show platform summary
show platform fan
show platform temperature
- Why I did it
With the previous MFT 4.18.1-16 there is a bug in mstdump tool accessing wrong address. it is confirmed this issue does not exist in official 4.18.0-106.
- How I did it
Update the MFT version to 4.18.0-106
- How to verify it
Run regression on Mellanox platforms
Why I did it
Add CPU thermal control for Nvidia platforms which will be enabled for platforms that have heavy CPU load. Now it is only enabled on 4800, and it will be enabled on future platforms.
How I did it
Check CPU pack temperature and update cooling level accordingly
How to verify it
Manual test
Added sonic-mgmt test case, PR link will update later
- Why I did it
Fix issue: psu might use wrong voltage sysfs which causes invalid voltage value. The flow is like:
1. User power off a PSU
2. All sysfs files related to this PSU are removed
3. User did a reboot/config reload
4. PSU will use wrong sysfs as voltage node
- How I did it
Always try find an existing sysfs.
- How to verify it
Manual test
- Fix i2c bus on crow cpu
- Fix exception handling in logs
- Improve linecard mgmt interface configuration
- Add new PSU models for chassis
- Misc fixes
Why I did it
fan_drawer support was missing in PDDF common platform APIs. This resulted in 'thermalctld' not working and 'show platform fan' and 'show platfomr temperature' commands not working.
_thermal_list array inside PSU class was not initialized. Made changes to attach the PSU related thermal sensors in the PSU instance.
How I did it
Added a common class pddf_fan_drawer.py. This class uses the PDDF JSON to fetch the platform specific data. A platform which uses PDDF would follow the below hierarchy.
fan_drawer_base.py ---> pddf_fan_drawer.py ---> fan_drawer.py
How to verify it
Run the 'show platform fan' and 'show platform temperature' commands and check the o/p.
o/p on AS7326:
root@sonic:/home/admin# show platform fan
s Drawer LED FAN Speed Direction Presence Status Timestamp
-------- ----- ---------- ------- ----------- ---------- -------- -----------------
Fantray1 green Fantray1_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray1 green Fantray1_2 38% EXHAUST Present OK 20220311 04:15:03
Fantray2 green Fantray2_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray2 green Fantray2_2 38% EXHAUST Present OK 20220311 04:15:03
Fantray3 green Fantray3_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray3 green Fantray3_2 38% EXHAUST Present OK 20220311 04:15:03
Fantray4 green Fantray4_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray4 green Fantray4_2 38% EXHAUST Present OK 20220311 04:15:03
Fantray5 green Fantray5_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray5 green Fantray5_2 38% EXHAUST Present OK 20220311 04:15:03
Fantray6 green Fantray6_1 38% EXHAUST Present OK 20220311 04:15:03
Fantray6 green Fantray6_2 38% EXHAUST Present OK 20220311 04:15:03
N/A off PSU1_FAN1 0% Present Not OK 20220311 04:15:05
N/A green PSU2_FAN1 34% EXHAUST Present OK 20220311 04:15:05
hroot@sonic:/home/admin# show platform temperature
Sensor Temperature High TH Low TH Crit High TH Crit Low TH Warning Timestamp
---------- ------------- --------- -------- -------------- ------------- --------- -----------------
PSU1_TEMP1 0 N/A N/A N/A N/A False 20220311 04:15:05
PSU2_TEMP1 37 N/A N/A N/A N/A False 20220311 04:15:05
TEMP1 37 80.0 N/A N/A N/A False 20220311 04:15:05
TEMP2 27 80.0 N/A N/A N/A False 20220311 04:15:05
TEMP3 28.5 80.0 N/A N/A N/A False 20220311 04:15:05
TEMP4 30.5 80.0 N/A N/A N/A False 20220311 04:15:05
root@sonic:/home/admin#
root@sonic:/home/admin#
root@sonic:/home/admin#
o/p on AS7726:
root@as7726-32x-2:~# show platform fan
Drawer LED FAN Speed Direction Presence Status Timestamp
-------- ----- ---------- ------- ----------- ---------- -------- -----------------
Fantray1 green Fantray1_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray1 green Fantray1_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray2 green Fantray2_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray3 green Fantray3_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray4 green Fantray4_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray5 green Fantray5_2 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_1 38% EXHAUST Present OK 20220311 08:13:04
Fantray6 green Fantray6_2 38% EXHAUST Present OK 20220311 08:13:04
N/A green PSU1_FAN1 23% EXHAUST Present OK 20220311 08:13:04
N/A green PSU2_FAN1 22% EXHAUST Present OK 20220311 08:13:04
root@as7726-32x-2:~# show platform temp
Sensor Temperature High TH Low TH Crit High TH Crit Low TH Warning Timestamp
---------- ------------- --------- -------- -------------- ------------- --------- -----------------
PSU1_TEMP1 28 N/A N/A N/A N/A False 20220311 08:13:04
PSU2_TEMP1 25 N/A N/A N/A N/A False 20220311 08:13:04
TEMP1 23.5 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP2 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP3 24 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP4 27 80.0 N/A N/A N/A False 20220311 08:13:04
TEMP5 24 80.0 N/A N/A N/A False 20220311 08:13:04
* Initial pass of EdgeCore platform changes.
* Remove libevent dependency from lldpd.
* Remove python2 dependencies python3.7 force from platform install script.
* Include usbmount support changes.
* Add missing 4630 install file.
* Update a few file permissions. Add umask line to Makefile. Specify python3.9 in install script.
* Misc platform updates:
- Add missing fan drawer component to sonic_platform
- Remove kernel version specification from Makefile
- Update to 4630 utility
* - Fix file permissions on source files
- Fix compile issue with 4630 driver modules (set_fs, get_fs, no longer supported in kernel 5.10)
* Fix missing/extra parens in 4630 util script.
* Fix indentation in fanutil.py.
* Integrate deltas from Edgecore to ec_platform branch.
* Installer update from Edgecore to resolve smbus serial console errors.
* Update stable_size for warm boot.
* Fix SFP dictionary key to match xcvrd.
* - Add missing define in event.py files needed for xcvrd
- Fix SFP info dict key for 7xxx switches
* 5835 platform file updates including installer and 5835 utility.
* 5835 fix for DMAR errors on serial console.
* Don't skip starting thermalctld in the pmon container.
* Revert several changes that were not related to platform.
* Run thermalctld in pmon container.
* Don't disable thermalctld in the pmon container.
* Fix prints/parens in 7816 install utility.
* - Incorporate 7816 changes from Edgecore
- Fix 7326 driver file using old kernel function
* Update kernel modules to use kernel_read().
* Fix compile errors with 7816 and 7326 driver modules.
* Fix some indents preventing platform files from loading.
* Update 7816 platform sfp dictionary to match field names in xcvrd.
* Add missing service and util files for 7816.
* Update file names, etc. based on full SKU for 7816.
* Delete pddf files not needed. These were causing conflicts with API2.0
implementation.
* Remove pddf files suggested by Edgecore that were preventing API2.0 support from starting.
* Install API2.0 file instead of pddf.
* Update 7326 mac service file to not use pddf. Fix syntax errors in 7326 utility script.
* Fix sonic_platform setup file for 7326.
* Fix syntax errors in python scripts.
* Updates to 7326 platform files.
* Fix some tab errors pulled down from master merge.
* Remove pddf files that were added from previous merge.
* Updates for 5835.
* Fix missing command byte for 5835 psu status.
* Fix permission bits on 4630 service files.
* Update platforms to use new SFP refactoring.
* Fix unused var warnings.
Correct libsaithrift dependency package name from
LIBTHRIFT_DEV_0_14_1 THRIFT_COMPILER_0_14_1 to
LIBTHRIFT_0_14_1_DEV THRIFT_0_14_1_COMPILER
How I did it
How to verify it
Test Done:
make BLDENV=buster SAITHRIFT_V2=y -f Makefile.work target/debs/buster/saiserverv2_0.9.4_amd64.deb
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
Why I did it
The previous implementaion of API for platform component didn't have the new thrift files
How I did it
Add the new thrift-generated: pltfm_mgr_rpc.py, ttypes.py
How to verify it
Run manually 'fwutil show status' or run unit tests
Previous command output had no information about components
New command output
Chassis Module Component Version Description
------------------------ -------- ----------- --------- -------------
Chassis1 N/A BIOS 1.2.3 Chassis BIOS
BMC 5.1 Chassis BMC
* [BFN] Implementation API for platform component
SONiC has a concept of "platform components"
this may include - CPLD, FPGA, BIOS, BMC, etc.
These changes are needed to read the version of the BIOS and BMC component.
What I did
Create components.py module
Add funcion for reading componet version to thrift interface
How I did it
The previous implementaion didn't have platform components API, so fwutil return an empty list.
After implementation of the platform component API, we have actual list of platform components and firmware versions
How to verify it
Run manually 'fwutil show status' or run unit tests
Previous command output
Chassis Module Component Version Description
------------------------ -------- ----------- --------- -------------
New command output
Chassis Module Component Version Description
------------------------ -------- ----------- --------- -------------
Chassis1 N/A BIOS 1.2.3 Chassis BIOS
BMC 5.1 Chassis BMC
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* [BFN] Implementation API for platform component
SONiC has a concept of "platform components"
this may include - CPLD, FPGA, BIOS, BMC, etc.
These changes are needed to read the version of the BIOS and BMC component.
What I did
Create components.py module
Add funcion for reading componet version to thrift interface
How I did it
The previous implementaion didn't have platform components API, so fwutil return an empty list.
After implementation of the platform component API, we have actual list of platform components and firmware versions
How to verify it
Run manually 'fwutil show status' or run unit tests
Previous command output
Chassis Module Component Version Description
------------------------ -------- ----------- --------- -------------
New command output
Chassis Module Component Version Description
------------------------ -------- ----------- --------- -------------
Chassis1 N/A BIOS 1.2.3 Chassis BIOS
BMC 5.1 Chassis BMC
Signed-off-by: Taras Keryk <tarasx.keryk@intel.com>
* [BFN] Implementation API for platform component
get chassis name from json
* [BFN] Implementation API for platform component
Updated platform and platrom_components json
* [BFN] Implementation API for platform component
Fixed spaces in component.py
* [BFN] Implementation API for platform component
Fixed exception in component.py
* Update chassis.py
* [BFN] Implementation API for platform component
Fixed spaces in component.py, chassis.py
* [BFN] Implementation API for platform component: Fixed spaces in component.py, chassis.py
* Fixed exception in get_bios_version
Why I did it
N3248TE - Platform API 2.0 changes
How I did it
Implemented the functional API's needed for Platform API 2.0
How to verify it
Used the API 2.0 test suite to validate the test cases.
