Why I did it
First SONIC 202305 based release
Includes all fixes so far up to latest 202205 based 8111 drop (Code drop 111: 202205.main.0.13)
Work item tracking
Microsoft ADO (number only):
How I did it
update to 202305.main.0.1 release
How to verify it
Why I did it
SONiC service determine-reboot-cause might run before driver creating reset cause files. In that case, the reset cause will be "Unknown". This PR introduces a wait mechanism to wait for reset cause sysfs files ready.
How I did it
/run/hw-management/config/reset_attr_ready is the file to indicate all reset cause files are ready. In chassis.get_reboot_cause function, it waits /run/hw-management/config/reset_attr_ready for up to 45 seconds.
How to verify it
Manual test on master/202211/202205
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support
SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.
- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Co-authored-by: Vadym Hlushko <62022266+vadymhlushko-mlnx@users.noreply.github.com>
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Why I did it
sonic-mgmt test failure is seen for update_firmware component API
Microsoft ADO: 25208748
How I did it
Edited API 2.0 to fix this issue.
How to verify it
Run sonic-mgmt test after the fix and verify it passes.
* [Mellanox] Update SDK/FW/SAI to 4.6.1020/2012.1020/SAIBuild2305.25.0.3 (#16096)
SONiC changes:
1. Support Spectrum4 ASIC FW binary building.
2. Support new SDK sx-obj-desc lib building since new SAI need it.
3. Remove SX_SCEW debian package from Mellanox SDK build since we are no longer using it (we use libxml2 instead).
4. Update SAI, SDK, FW to version 4.6.1020/2012.1020/SAIBuild2305.25.0.3
SDK/FW bug fixes
1. In SPC-1 platforms: Fastboot mode is not operational for Split port with Force mode in 50G speed
SFP modules are kept in disabled state after set LPM (low power mode) on/off for at least 3 minutes.
2. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
SDK/FW Features
1. On SN2700 all ports can support y cable by credo
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 when fastboot enable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
- How I did it
Update SDK/FW/SAI make files
- How to verify it
Run full sonic-mgmt regression on Mellanox platform
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Conflicts:
platform/mellanox/mlnx-sai.mk
* Fix issue: unprintable character is rendered when handling comments in j2
Use "{#-" and "-#}" to mark comments in jinja template
Signed-off-by: Stephen Sun <stephens@nvidia.com>
---------
Signed-off-by: Stephen Sun <stephens@nvidia.com>
Co-authored-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
watchdogutil uses platform API watchdog instance to control/query watchdog status. In Nvidia watchdog status, it caches "armed" status in a object member "WatchdogImplBase.armed". This is not working for CLI infrastructure because each CLI will create a new watchdog instance, the status cached in previous instance will totally lose. Consider following commands:
admin@sonic:~$ sudo watchdogutil arm -s 100 =====> watchdog instance1, armed=True
Watchdog armed for 100 seconds
admin@sonic:~$ sudo watchdogutil status ======> watchdog instance2, armed=False
Status: Unarmed
admin@sonic:~$ sudo watchdogutil disarm =======> watchdog instance3, armed=False
Failed to disarm Watchdog
- How I did it
Use sysfs to query watchdog status
- How to verify it
Manual test
Unit test
- Why I did it
Update Mellanox MFT tool to version 4.25.0-62
- How I did it
Update the MFT tool make file
- How to verify it
Run full sonic-mgmt regression.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
= Why I did it
To optimize Mellanox platform SAI build
- How I did it
SAI debs are now downloaded as Spectrum-SDK-Drivers-SONiC-Bins release.
- How to verify it
Configure/build for Mellanox platform, check the image and ensure that correct SAI debs are included.
- Why I did it
Change Mellanox platform API implementation to use ASIC driver sysfs for the module operational state and status error fields.
- How I did it
Modify the platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py file by change the call of sx_mgmt_phy_module_info_get() SDK API to sysfs
- How to verify it
Simulate the unplug cable event
Check the CLI output
sfputil show presence
sfputil show error-status -hw
Simulate the plug cable event
Repeat 2 step
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Why I did it
Updating the iSMART_64 tool for supporting latest debian releases.
How I did it
On branch new_ismart
Changes to be committed:
(use "git restore --staged ..." to unstage)
modified: platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iSMART_64
How to verify it
In s6100, run the iSMART_64 tool.
md5sum - 24725730d7649769c7ba50971c1f2955
Co-authored-by: Santhosh Kumar T <53558409+santhosh-kt@users.noreply.github.com>
- Why I did it
Increase UT coverage for Nvidia platform API code
Work item tracking
Microsoft ADO (number only):
- How I did it
Focus on low coverage file:
1. component.py
2. watchdog.py
3. pcie.py
- How to verify it
Run the unit test, the coverage has been changed from 70% to 90%
Co-authored-by: Junchao-Mellanox <57339448+Junchao-Mellanox@users.noreply.github.com>
Why I did it
Sharing the storage of syncd with other proprietary application extensions allows them to communicate with syncd in differnt ways.
If one container wants to pass some information to syncd then shared storage can be used. However, today the shared storage isn't cleaned on restarts making it possible for syncd to read out-of-date information generated in the past.
NOTE: No plans to use it for standard SONIC dockers and we are working on removing the SDK dependency from PMON docker
How I did it
Implemented new service to clean the shared storage.
How to verify it
Do reboot/fast-reboot/warm-reboot/config-reload/systemctl restart swss and verify /tmp/ is cleaned after each restart in syncd container.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Co-authored-by: Stepan Blyshchak <38952541+stepanblyschak@users.noreply.github.com>
Why I did it
fix pcied leak on chassis
fix fan status led setting on fixed systems
misc fixes
Work item tracking
Microsoft ADO (number only):
How I did it
Updated arista platform library submodules
Description for the changelog
Update Arista platform submodules
- Why I did it
SDK patches for iproute2 were added to SONiC tree as a temporary solution.
Now that SDK with the patches is available, I have removed the patches from SONiC tree and we consume them from SDK github during compilation.
- How I did it
During build we download SDK iproute2 patches from SDK github (or from the URL provided by user if compiling SDK from sources) and apply them before compilation.
- How to verify it
Compile and load on switch, verify interfaces network devices created successfully.
Verify LLDP shows connections to neighbors.
Verify ping between 2 hosts over 2 router ports is successful.
- Why I did it
Adjust the warning threshold implementation according to the latest algorithm update
- How I did it
Modify power warning and critical thresholds methods
- How to verify it
Unit test updated to cover the change
Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it
Add the patchwork link to the commit description for non-upstream patches if present
- How I did it
Parse the patchwork/<patch_name>.txt file from hw-mgmt
Why I did it
FPGA driver crash was observed in Dell FPGA based platforms.
How I did it
Fixed FPGA crash
How to verify it
Load FPGA driver and check whether the kernel crashes.
Why I did it
When git clone -b xxx command is used the versions-git will reset the HEAD of the git to the commit ID in the versions-git file. Which causes incorrect commit to be checked out causing build errors.
Work item tracking
Microsoft ADO (number only):
How I did it
Split ‘git clone -b’ into two steps to avoid owerwrite
Git clone
cd mrvl-prestera; git checkout ; cd ..
How to verify it
Build marvell-arm64 target using below instructions
make init
make configure PLATFORM=marvell-arm64 PLATFORM_ARCH=arm64
make target/sonic-marvell-arm64.bin SONIC_BUILD_JOBS=2
- Why I did it
Bug fix:
- * I2C bus is stuck - Unable to probe I2C bus 2-0048, which causes /var/run/hw-management/config/sfp_counter, module_counter to be zero and pmon docker unable to start.
- How I did it
Update HW-MGMT package version in the make file
Update HW-MGMT submodule pointer
-How to verify it
Run full sonic-mgmt regression
Signed-off-by: Kebo Liu <kebol@nvidia.com>
#### Why I did it
Facilitate Automatic integration of sdk kernel patches into SONiC.
**Inputs to the Script:**
1) `MLNX_SDK_VERSION` Eg: `4.5.4206`
2) `MLNX_SDK_ISSU_VERSION` Eg: `101`
**Note: If nothing is provided the one already present in the sdk.mk file is used**
3) `MLNX_SDK_SOURCE_BASE_URL:`
**Note: If nothing is provided the upstream sdk drivers url is used**
4) `CREATE_BRANCH: (y|n)` Creates a branch instead of a commit (optional, default: n)
5) `BRANCH_SONIC`: Only relevant when CREATE_BRANCH is y. `Default: master`.
Note: These should be provided through `SONIC_OVERRIDE_BUILD_VARS ` parameter
**Output:**
1) Script creates a commit in sonic-linux-kernel with any updates to sdk-kernel patches in sonic in accordance with the version provided by `MLNX_SDK_VERSION`
**Note: Script Doesn't commit anything to linux-kernel when there aren't any changes required..**
#### How I did it
1) Added a new make target which can be invoked by calling `make integrate-mlnx-sdk`
```
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git rev-parse --abbrev-ref HEAD
master_6f38dca_integrate_4.5.4206
user@server:/sonic-buildimage/src/sonic-linux-kernel$ git log --oneline -n 1
d64d1e7 (HEAD -> master_6f38dca_integrate_4.5.4206) Intgerate MLNX SDK 4.5.4206 Kernel Patches
```
Changes made will be summarized under `sonic-buildimage/integrate-mlnx-sdk_user.out` file. Debugging and troubleshooting output is written to `sonic-buildimage/integrate-mlnx-sdk.log` files
[log_files.zip](https://github.com/sonic-net/sonic-buildimage/files/11226441/log_files.zip)
#### Limitations:
1) Assumes that the sdk kernel patches are always upstreamed
#### How to verify it
Build the Kernel and test
Why I did it
Align with SAI headers v1.12.0
Work item tracking
Microsoft ADO (number only):
How I did it
Update Mellanox SAI submodule
How to verify it
Compile SONiC image
- Why I did it
The current implementation of SFP reset, LPM, present relies on SDK API. This PR moves the implementation to SDK sysfs. By this PR, it gains following benefit:
1. SDK sysfs provides better performance.
2. Host side and container side share the same code.
3. Code is much cleaner.
- How I did it
Use SDK sysfs to implement SFP reset, LPM, present.
- How to verify it
1. Manual test.
2. Unit test.
SDK/FW Fixed Issues:
• When a system has more than 256 ACL entries, on rare occasion, removing/adding entries may cause some ACL entries not to work.
• When using mirror session policer on spectrum-2, spectrum-3, the actual CIR was 1.28 times more than the configured CIR value
• After warm boot process, when enabling ECN marking and the port is in split mode, traffic sent to the port under congestion (for example, when connecting two ports with a total speed of 50GbE to a single 25GbE port) is not marked.
• Warm boot might fail if the key value SAI_KEY_ACCUMULATED_FLOW_COUNTER_UNITS_IN_KB is set
• If counters are bound to an next hop group, there is a probability the next API calls that modify the next-hop group members will fail.
• In Spectrum platforms Fastboot mode is not operational for Split port with Force mode in 50G speed
• When fine grain next hop group has a size of 2K or 4K members, and group is removed, FW will remove only (size % 2048) members, resulting in leakage of KVD resources
• When reading some port statistics, or bulk reading some Queue or PG statistics, and in parallel reading or writing other counters, FW may, in rare cases, get stuck
• SN2201 Module 1 is considered to be present/linked while no cable/module is plugged
• On Spectrum-3 when port configure to 400G FW might stuck after running mlxlink while 400G interface connected and swap between upper and lower 4 lanes
SAI New features:
• ACL: Added support for an ACL match on the AETH field (SAI_ACL_TABLE_ATTR_FIELD_AETH_SYNDROME, SAI_ACL_ENTRY_ATTR_FIELD_AETH_SYNDROME) to count RoCE NAK and CNP packets.
• PLL Status: Added a new logging entry that alerts the user upon a PLL lock loss event.
• Dual ToR - Additional MAC Address: Added support for setting a MAC address for the router interface which is not part of the 10 bit MAC address available for RIFs on Spectrum-1, as part of the Dual ToR scenario.
• Dual ToR: DSCP Remapping Added support for tunnel QoS maps as part of the Dual TOR scenario.
SAI Fixed issues:
• When setting a WRED profile attribute for a color that was not enabled during the profile create time, an error would be returned. After the fix, a default profile is create on such scenario and the set attribute is applied on top of it
• When calling the flush FDB by using the SAI_FDB_FLUSH_ATTR_BRIDGE_PORT_ID attribute, the bridge bv_id value was filled on the notification callback where it should have been left empty.
Signed-off-by: Kebo Liu <kebol@nvidia.com>
Add new Nokia build target and establish an arm64 build:
Platform: arm64-nokia_ixs7215_52xb-r0
HwSKU: Nokia-7215-A1
ASIC: marvell
Port Config: 48x1G + 4x10G
How I did it
- Change make files for saiserver and syncd to use Bulleseye kernel
- Change Marvell SAI version to 1.11.0-1
- Add Prestera make files to build kernel, Flattened Device Tree blob and ramdisk for arm64 platforms
- Provide device and platform related files for new platform support (arm64-nokia_ixs7215_52xb-r0).
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds S3IP supported sysfs attribute in common FAN driver of PDDF.
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds the S3IP supported sysfs attributes in PDDF common LED driver.
Why I did it
The S3IP (Simplified Switch System INtegration Program) sysfs specification defines a unified interface to access peripheral hardware on devices from different vendors, making it easier for SONiC to support different devices and platforms.
PDDF is a framework to simplify the driver and SONiC platform APIs development for new platforms. This effort is first step in combining the two frameworks.
This specific PR adds support for pddf-s3ip-init.service and enables it in PDDF.
Why I did it
ptf_nn_agent failed to start in dnx rpc syncd because module afpacket was not installed.
Please see issue sonic-net/sonic-mgmt#7822
How I did it
Add downloading ptf afpacket module in docker file.
How to verify it
Verified that ptf_nn_agent was started successfully in dnx rpc syncd with the change.
