* Remove main deb installation for derived deb build (#16859)
* Don't install dependencies of derived debs
When "building" a derived deb package, don't install the dependencies of
the package into the container. It's not needed at this stage.
* Re-add openssh-client and openssh-sftp-server as derived debs
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
(cherry picked from commit 9ae77bc2dd)
* Re-add missing dependency for derived debs. (#16896)
* Re-add missing dependency for derived debs.
My previous changed removed the whole dependency on the main deb
existing, not just the installation of the main deb. Fix this by
readding a dependency on the main deb being built/pulled from cache.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
---------
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
(cherry picked from commit 963d40a77b)
* [build] Fix build issue in docker-ptf-sai caused by setuptools_scm new release (#16636)
docker-ptf-sai build fails on setuptools_scm's new release on 09/20/2023.
Use old version instead.
(cherry picked from commit bfa05c8349)
---------
Co-authored-by: Liu Shilong <shilongliu@microsoft.com>
Why I did it
Enabling kdump by default for cisco-8000 by setting crashkernel cmdline arg in device installer.conf.
After bootup, sonic-kdump-config wipes crashkernel arg from /host/grub/grub.cfg, and resets USE_KDUMP in /etc/default/kdump-tools, so kdump will not be enabled on subsequent reboot.
How I did it
Setting kdump enable config as part of init_cfg.json for cisco-8000 platforms.
How to verify it
Install SONiC image with kdump enabled by default (device/hwsku/installer.conf), then reboot.
Kdump config should persist on subsequent reboots and kdump loaded during bootup
Signed-off-by: Aman Singhal <amans@cisco.com>
Created patches to address two CVEs from FRR CVE-2023-41358 and CVE-2023-38802.
Patch FRR commit CVE fixed
0024-bgpd-Do-not-process-NLRIs-if-the-attribute-length-is.patch FRRouting/frr@f291f1e CVE-2023-41358
0025-bgpd-Use-treat-as-withdraw-for-tunnel-encapsulation-.patch FRRouting/frr@8a4a88c CVE-2023-38802
Why I did it
Networking devices need to be responsive. Such responsiveness is harmed when the CPU change state.
There is a latency penalty when a CPU is idle (e.g C2) and need to exit this state to come back to C1 state.
To prevent this from happening the CPU should be forced to remain in C1 state.
How I did it
Generalize the cstate forcing to C1 to all Arista products.
This is done by adding processor.max_cstate=1 to the kernel cmdline for all CPUs.
Additionally Intel CPUs also need intel_idle.max_cstate=0 to fallback to the acpi_idle driver.
How to verify it
Check that processor.max_cstate=1 is present on the cmdline for AMD CPUs
Check that both processor.max_cstate=1 and intel_idle.max_cstate=0 are present on the cmdline for Intel CPUs
On some products from this line one of the management NIC might be unpopulated.
On such products this leads to errors from pcied and pcie-check.sh
How I did it
Remove this PCIe device from pcie.yaml
How to verify it
Run pcieutil check on the 2 hardware variants and validate that it passes.
Restart pcied and make sure that there is no more error logs in the syslog.
ADO: 25447788
Openssh in Debian Bullseye has been updated to 1:8.4p1-5+deb11u2 to fix CVE-2023-38408.
Since we're building openssh with some patches, we need to update our version as well.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
previously, get_num_asics() returns the maximum number of asics. however, the asic_count
should be actual number of asics populated which can be get from get_asic_presence_list().
ADO: 25158825
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
#### Why I did it
src/sonic-swss
```
* fc63383b - (HEAD -> 202305, origin/202305) [ppi]: Implement port bulk comparison logic (#2921) (2 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-host-services
```
* fc88254 - (HEAD -> 202305, origin/202305) Support to config fips state (#69) (#78) (16 hours ago) [xumia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
sonic-host-services depends on sonic-utilities because of FIPS feature.
Add dependency to unblock submodule sonic-host-services HEAD pointer update.
Work item tracking
Microsoft ADO (number only): 24671218
How I did it
### Why I did it
When FRR is built with Cache enabled, the build failed with the following error logs
```
[2023-09-20T15:17:00.273Z] fatal: Unable to hash src/sonic-frr/frr/tests/topotests/grpc_basic/lib
[2023-09-20T15:17:00.273Z] fatal: Unable to hash src/sonic-frr/frr/tests/topotests/ospfapi/lib
[2023-09-20T15:17:00.273Z] make: *** [Makefile.cache:528: target/debs/bullseye/frr_8.5.1-sonic-0_amd64.deb.smdep] Error 123
[2023-09-20T15:17:00.273Z] make: *** Waiting for unfinished jobs....
```
#### How I did it
Currently symlinks are excluded in hardcoded fashion. With FRR upgrades new symlinks might get introduced. To overcome it modified the way in which symlinks are excluded by finding symlinks using find command
#### How to verify it
Build FRR with cache enabled
Why I did it
Now build will fail on:
fatal: Unable to hash src/sonic-frr/frr/tests/topotests/grpc_basic/lib
fatal: Unable to hash src/sonic-frr/frr/tests/topotests/ospfapi/lib
make: *** [Makefile.cache:528: target/debs/buster/frr_8.5.1-sonic-0_amd64.deb.smdep] Error 123
make: *** Waiting for unfinished jobs....
Root cause is that these files are symbol links.
git hash-object can't hash symbol links.
Work item tracking
Microsoft ADO (number only): 25271730
How I did it
These two files are symbol links.
When calculate sha value, skip these two files.
#### Why I did it
src/sonic-linux-kernel
```
* e262947 - (HEAD -> 202305, origin/202305) Revert "Update to Linux 5.10.179 (#328)" (19 hours ago) [stormliang]
* e64669d - Update to Linux 5.10.179 (#328) (2 days ago) [Saikrishna Arcot]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* Revert "[SNMP][IPv6]: Fix to use link local IPv6 address as snmp agentAddress (#16013)"
This reverts commit ebe8c8c223.
* Revert "[SNMP][IPv6]: Fix SNMP IPv6 reachability issue in certain scenarios (#15487) (#15874)"
This reverts commit 83aa8b8180.
#### Why I did it
src/sonic-gnmi
```
* df4d49f - (HEAD -> 202305, origin/202305) Install necessary debs instead of entire artifact in azp (#137) (12 hours ago) [Zain Budhwani]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
First SONIC 202305 based release
Includes all fixes so far up to latest 202205 based 8111 drop (Code drop 111: 202205.main.0.13)
Work item tracking
Microsoft ADO (number only):
How I did it
update to 202305.main.0.1 release
How to verify it
BACKPORT: #16781
Why I did it
To enable Store-And-Forward switching mode for SN2700/SN3800/SN4600C/SN4700
Work item tracking
N/A
How I did it
Added vendor SAI config options
How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Why I did it
SONiC service determine-reboot-cause might run before driver creating reset cause files. In that case, the reset cause will be "Unknown". This PR introduces a wait mechanism to wait for reset cause sysfs files ready.
How I did it
/run/hw-management/config/reset_attr_ready is the file to indicate all reset cause files are ready. In chassis.get_reboot_cause function, it waits /run/hw-management/config/reset_attr_ready for up to 45 seconds.
How to verify it
Manual test on master/202211/202205
Sfp api can now be called from the host which doesn't have the python_sdk_api installed. Also, sfp api has been migrated to use sysfs instead of sdk handle.
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
#### Why I did it
src/sonic-swss
```
* 8934b62b - (HEAD -> 202305, origin/202305) [202305][CodeQL]: Use dependencies with relevant versions in azp template. (#2906) (3 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-swss
```
* 0584d35b - (HEAD -> 202305, origin/202305) Revert "Support type7 encoded CAK key for macsec in config_db (#2892)" (3 minutes ago) [stormliang]
* 7097cf2b - Revert "[teamd]: Clean teamd process if LAG creation fails (#2888)" (3 days ago) [stormliang]
* a0eb0d07 - Support type7 encoded CAK key for macsec in config_db (#2892) (4 days ago) [judyjoseph]
* c7e5f10e - [teamd]: Clean teamd process if LAG creation fails (#2888) (4 days ago) [Lawrence Lee]
* f30b6107 - [CodeQL]: Use dependencies with relevant versions in azp template. (#2845) (4 days ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
- Why I did it
SAI bug Fixes
1. When creating an ACL rule with SAI_ACL_ENTRY_ATTR_FIELD_SRC_IP/SAI_ACL_ENTRY_ATTR_FIELD_DST_IP enabled, and then disabling the field by setting enable=false, a match on L3_type=IPv4 will remain programmed for the rule Issue resolved after the fix
2. Allow the max scale of virtual routers to be configure for SPC-1, SPC-2, SPC-3 which is 255 when fastboot enable and 511 when fastboot disable
3. Remove default hash key of SRC_MAC, DST_MAC and ETH_TYPE
SAI features
1. Port init profile
2. Dual ToR Active-Standby | Additional MAC support
SDK/FW bug fixes
1. When preforming fast boot from an old SDK version (currently installed) to a newer one (target version), and the system was initially loaded with a new SDK version (past version), and the system has not been wiped, under specific conditions, the fast boot would use the past version's data and may fail.
- How I did it
Update SAI version to SAIBuild2211.25.1.4
Update SDK/FW version to 4.6.1062/2012.1062
* [swss] Chassis db clean up optimization and bug fixes
This commit includes the following changes:
- Fix for regression failure due to error in finding CHASSIS_APP_DB in
pizzabox (#PR 16451)
- After attempting to delete the system neighbor entries from
chassis db, before starting clearing the system interface entries,
wait for sometime only if some system neighbors were deleted.
If there are no system neighbors entries deleted for the asic coming up,
no need to wait.
- Similar changes for system lag delete. Before deleting the
system lag, wait for some time only if some system lag memebers were
deleted. If there are no system lag members deleted no need to wait.
- Flush the SYSTEM_NEIGH_TABLE from the local STATE_DB. While asic
is coming up, when system neigh entries are deleted from chassis ap
db (as part of chassis db clean up), there is no orchs/process running to
process the delete messages from chassis redis. Because of this, stale system
neigh are entries present in the local STATE_DB. The stale entries result in
creation of orphan (no corresponding data path/asic db entry) kernel neigh
entries during STATE_DB:SYSTEM_NEIGH_TABLE entries processing by nbrmgr (after
the swss serive came up). This is avoided by flushing the SYSTEM_NEIGH_TABLE from
the local STATE_DB when sevice comes up.
Signed-off-by: vedganes <veda.ganesan@nokia.com>
* [swss] Chassis db clean up bug fixes review comment fix - 1
Debug logs added for deletion of other tables (SYSTEM_INTERFACE and SYSTEM_LAG_TABLE)
Signed-off-by: vedganes <veda.ganesan@nokia.com>
---------
Signed-off-by: vedganes <veda.ganesan@nokia.com>
(cherry picked from commit b13b41fc22)
Stop installing development packages from telemetry docker images to avoid unnecessary space usage.
### Why I did it
From 202305, libswsscommon-dev and the Boost headers were brought in telemetry docker image incorrectly, which result in unnecessary space usage.
##### Work item tracking
- Microsoft ADO **(number only)**:25176224
#### How I did it
Remove libswsscommon-dev accordingly.
#### How to verify it
Image building.
Signed-off-by: anamehra anamehra@cisco.com
Added a check for DEVICE_METADATA before accessing the data. This prevents the j2 failure when var is not available.
In #15080, there was a command added to re-add 127.0.0.1/8 to the lo
interface when the networking configuration is being brought down.
However, the trigger for that command is `down`, which, looking at
ifupdown2 configuration files, runs immediately after 127.0.0.1/16 is
removed. This means there may be a period of time where there are no
loopback addresses assigned to the lo interface, and redis commands will
fail.
Fix this by changing this to pre-down, which should run well before
127.0.0.1/16 is removed, and should always leave lo with a loopback
address.
Signed-off-by: Saikrishna Arcot <sarcot@microsoft.com>
Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
* Change the CAK key length check in config plugin, macsec test profile changes
* Fix the format in add_profile api
The changes needed in various macsec unit tests and config plugin when we move to accept the type 7 encoded key format for macsec. This goes along with PR : sonic-net/sonic-swss#2892 raised earlier.
Co-authored-by: judyjoseph <53951155+judyjoseph@users.noreply.github.com>
