#### Why I did it
The %%EXTRA_CMDLINE_LINUX%% is not replaced to the real value, it has impact on the kernel parameter settings.
See the log sonic-vs.img.gz.log in the latest master build. In the grub.cfg, the %%EXTRA_CMDLINE_LINUX%% is set in the linux command line.
```
Installing for i386-pc platform.
Installation finished. No error reported.
Switch CPU vendor is: GenuineIntel
Switch CPU cstates are: disabled
EXTRA_CMDLINE_LINUX=%%EXTRA_CMDLINE_LINUX%%
Installed SONiC base image SONiC-OS successfully
ONIE: NOS install successful: file://dev/vdb/onie-installer.bin
```
#### Why I did it
To support Yang models for SRV6 CM
#### How I did it
Added yang models for SRV6 MY_SID_ENTRY and Nexthop
#### How to verify it
Added SRV6 CRM yang tests.
#### Which release branch to backport (provide reason below if selected)
202111
#### Why I did it
Submodule update for sonic-dbsyncd with following change:
```
0d67faf 2022-07-28 | Replace pyswsssdk with sonic-py-common (#45) [Hua Liu]
265c833 2022-01-11 | Updated the Azure pipeline for Code Coverage (#44) [abdosi]
6548116 2021-04-04 | [ci]: add proper azp [Guohan Lu]
43b9dab 2021-04-04 | [pytest]: add pytest.ini [Guohan Lu]
```
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-dbsyncd with following change:
```
0d67faf 2022-07-28 | Replace pyswsssdk with sonic-py-common (#45) [Hua Liu]
265c833 2022-01-11 | Updated the Azure pipeline for Code Coverage (#44) [abdosi]
6548116 2021-04-04 | [ci]: add proper azp [Guohan Lu]
43b9dab 2021-04-04 | [pytest]: add pytest.ini [Guohan Lu]
```
#### A picture of a cute animal (not mandatory but encouraged)
Co-authored-by: liuh-80 <azureuser@liuh-dev-vm-02.5fg3zjdzj2xezlx1yazx5oxkzd.hx.internal.cloudapp.net>
What I did:
Added bgp as a dependent of swss
Why I did it:
bgp container was not restarting on swss crash. When swss crashes, linkmgrd
doesn't initate a switchover because it cannot access the default route from
orchagent. Bringing down bgp with swss will isolate the ToR, causing linkmgrd
to initiate a switchover to the peer ToR avoiding significant packet loss.
How I did it:
Added bgp to DEPENDENT
Signed-off-by: Nikola Dancejic <ndancejic@microsoft.com>
Why I did it
The bgpcfgd doesn't support deletion of 'zebra set src', if an interface is deleted, the bgpcfgd will drop a warning message. In current implementation, we only care about the loopback0 interface but not others.
To improve the log print to have the key info, which will give the name of the deleted interface. We can ignore it if it is not the loopback0 interface. The application layer should be aware of that update and deletion is not supported, delete or update with a new address of loopback0 could cause issue, this log can give enough info to root cause the issue.
How I did it
How to verify it
this upgrade contains two changes:
1. Add the following MacSec Initialization Condition:
- When MacSec feature is not included MacSec block should not be brought out of reset irrespective of the value of the newly added config variable.
- When included its initialization is controlled by the newly added config variable.
2. DNX buf fix: increase _BRCM_SAI_MAX_ACL_TABLES to 128
Signed-off-by: zitingguo <zitingguo@microsoft.com>
Upgrade submodule sairedis to take the fix for saithrift build
Upgrade SAI to latest for building in bullseye (#1093)
involve other changes in sairedis:
[sairedis] Fix reopen recoding file (#1087)
Update PN with XPN support (#1081)
[syncd] Remove error message when tryTranslateVidToRid fails (#1048)
Signed-off-by: richardyu-ms <richard.yu@microsoft.com>
Spanning from sonic-net/sonic-linkmgrd#76, this PR is to update warm restart finalizer to wait for linkmgrd to be reconciled.
sign-off: Jing Zhang zhangjing@microsoft.com
Why I did it
To make sure finalizer save config after linkmgrd's reconciliation.
How I did it
Add linkmgrd to the reconciliation wait list of warmboot finalizer.
How to verify it
Verified on lab device, linkmgrd reconciled as expected.
A change in sonic-utilities makes all cache files be saved into a
/tmp/cache. On swss restart this cache has to be removed in case swss
starts in cold or fast mode. A related cache restoration in the warmboot
finalizer script is also updated to use new location.
- Why I did it
To fix#9817. Clear the cache directory on swss.sh except for warm start.
Also, adopted finalize-warmboot script to take the cache directory.
- How I did it
A change in sonic-utilities makes all cache files be saved into a /tmp/cache. On swss restart this cache has to be removed in case swss starts in cold or fast mode. A related cache restoration in the warmboot finalizer script is also updated to use new location.
- How to verify it
Run togather with Azure/sonic-utilities#2232. Verify counters cache is removed on config reload, cold/fast reboots, swss restart.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
feeac84 [counters] Keep counters cache in a single directory (#2232)
cd7909e Updated the CLI file for Radius and Linux kernel commands (#2276)
cd6898b Update db_migrator to support `PORT_QOS_MAP|global` (#2205)
8f4fc62 Revert "Revert "[scripts/fast-reboot] Shutdown remaining containers through systemd (#2133)" (#2161)" (#2184)
27667cf Fix test for pfcwd_sw_enable in db_migrator_test (#2253)
e1866e3 [MultiAsic] sudo reboot command doesn't gracefully stop Asic syncd# on multiasic platform (#2258)
9e3ba82 Change db_migrator major version on master branch from version 2 to 3 (#2272)
65346ce Microsoft mandatory file (#2177)
308e25f portconfig option to configure Tx power and laser frequency of ZR transceiver module (#2197)
e49b1e8 [vnet_route_check] Align DB data parse logic with format used by swsscommon API (#2268)
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
Why I did it:
To fix hlx platform sfp+ module tx disable issue
How I did it:
Fix sfp+ tx disable function according SFF-8472 specification
Co-authored-by: Eric Zhu <erzhu@celestica.com>
Fix in Monit memory_checker plugin. Skip fetching running containers if docker engine is down (can happen in deinit).
This PR fixes issue #11472.
Signed-off-by: liora liora@nvidia.com
Why I did it
In the case where Monit runs during deinit flow, memory_checker plugin is fetching the running containers without checking if Docker service is still running. I added this check.
How I did it
Use systemctl is-active to check if Docker engine is still running.
How to verify it
Use systemctl to stop docker engine and reload Monit, no errors in log and relevant print appears in log.
Which release branch to backport (provide reason below if selected)
The fix is required in 202205 and 202012 since the PR that introduced the issue was cherry picked to those branches (#11129).
Why I did it
Require multi-asic VS tests to be run during PR checks and merges in master branch.
How I did it
Add job to run multi-asic VS tests in sonic-buildimage pipeline. Currently pipeline will run basic bgp fact test to ensure the testbed comes up, load minigraph works and bgp sessions are up.
Use new multi-asic VS agent pool sonictest-ma in official-multi-asic-vs pipeline
Make multi-asic VS test optional for now. There are two known issues:
Announce route failure during refresh-dut in setup testbed stage.
bgp sessions not getting established.
How to verify it
Tested using test azure pipelines.
Why I did it
Enable syncd container autorestart for Innovium platforms
How I did it
Add critical_process file and sypervisord.conf entry
How to verify it
Tested with autorestart/test_container_autorestart.py::test_containers_autorestart
PASSED autorestart/test_container_autorestart.py::test_containers_autorestart[sonic-xxx-dut-sonic-xxx-dut|syncd]
Signed-off-by: rck-innovium rck@innovium.com
What I did:
Following changes done for packet based chassis:-
1> Run arp_update on LC's to resolve static route nexthops over backend
port-channel interfaces.
2> On Supervisor make sure arp_update exit gracefully
Why I did it
Not all build environments have passwordless sudo enabled for all users
How I did it
Instead of using sudo to delete fsroot directories, mount them in a small, temporary docker container and delete them from there
How to verify it
Build in an environment where the build user does not have passwordless sudo enabled and confirm that no sudo password prompts are seen
Why I did it
This PR is to backport PR #11056 and PR #11045 into master branch.
This PR is to enable tunnel_qos_remap on T1 and T0 in DualToR deployment.
On T1, we check the property DownstreamRedundancyTypes. On T0, we check the property RedundancyType.
tunnel_qos_remap is set to enabled if gemini is in DownstreamRedundancyTypes (on T1) or RedundancyType (on T0).
How I did it
The change is implemented in minigraph.py.
How to verify it
Verified by test_minigraph_case.py and 'test_j2files.py`.
sonic-platform-daemon submodule update
005ec30 [ycabled] remove some redundant logging for active-active cable type (#274)
e889625 [ycabled][grpc] Fix some time interval,options for grpc keep alive to work (#271)
1651050 [ycabled] add some retry logic for gRPC channel setup;fix no channel gRPC notification (#269)
7c0be24 [CMIS]Improved 400G link bring up sequence (#254)
df447b4 [ycabled] Fix the init values for active-active ports (#266)
ec84af4 [sonic-ycabled] fix grpc logic for timeout,cli HWSTATUS value retrival logic for active-active cable (#264)
Co-authored-by: Jaganathan Anbalagan <jaganbal@cisco.com>
Updating swss submodule with below commits
4a6f940 [EVPN]Fix missing Vlan member update notification in P2MP scenario
e9984d8 Enable p4orch unit test for test workflow. (#2375)
33c420d [Buffer Orch] Support removing buffer port profile list (#2371)
419ab1b [macsecmgr]: Fix cleanup macsec objs if container stop (#2376)
Why I did it
ip command cannot update packet number if the cipher is XPN.
How I did it
Specify SSCI when update packet number and ignore SSCI value if update action.
Signed-off-by: Ze Gan <ganze718@gmail.com>
* Ported Marvell armhf build on x86 for debian buster to use cross-compilation instead of qemu emulation
Current armhf Sonic build on amd64 host uses qemu emulation. Due to the
nature of the emulation it takes a very long time, about 22-24 hours to
complete the build. The change I did to reduce the building time by
porting Sonic armhf build on amd64 host for Marvell platform for debian
buster to use cross-compilation on arm64 host for armhf target. The
overall Sonic armhf building time using cross-compilation reduced to
about 6 hours.
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed final Sonic image build with dockers inside
* Update Dockerfile.j2
Fixed qemu-user-static:x86_64-aarch64-5.0.0-2 .
* Update cross-build-arm-python-reqirements.sh
Added support for both armhf and arm64 cross-build platform using $PY_PLAT environment variable.
* Update Makefile
Added TARGET=<cross-target> for armhf/arm64 cross-compilation.
* Reviewer's @qiluo-msft requests done
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Added new radius/pam patch for arm64 support
* Update slave.mk
Added missing back tick.
* Added libgtest-dev: libgmock-dev: to the buster Dockerfile.j2. Fixed arm perl version to be generic
* Added missing armhf/arm64 entries in /etc/apt/sources.list
* fix libc-bin core dump issue from xumia:fix-libc-bin-install-issue commit
* Removed unnecessary 'apt-get update' from sonic-slave-buster/Dockerfile.j2
* Fixed saiarcot895 reviewer's requests
* Fixed README and replaced 'sed/awk' with patches
* Fixed ntp build to use openssl
* Unuse sonic-slave-buster/cross-build-arm-python-reqirements.sh script (put all prebuilt python packages cross-compilation/install inside Dockerfile.j2). Fixed src/snmpd/Makefile to use -j1 in all cases
* Clean armhf cross-compilation build fixes
* Ported cross-compilation armhf build to bullseye
* Additional change for bullseye
* Set CROSS_BUILD_ENVIRON default value n
* Removed python2 references
* Fixes after merge with the upstream
* Deleted unused sonic-slave-buster/cross-build-arm-python-reqirements.sh file
* Fixed 2 @saiarcot895 requests
* Fixed @saiarcot895 reviewer's requests
* Removed use of prebuilt python wheels
* Incorporated saiarcot895 CC/CXX and other simplification/generalization changes
Signed-off-by: marvell <marvell@cpss-build3.marvell.com>
* Fixed saiarcot895 reviewer's additional requests
* src/libyang/patch/debian-packaging-files.patch
* Removed --no-deps option when installing wheels. Removed unnecessary lazy_object_proxy arm python3 package instalation
Co-authored-by: marvell <marvell@cpss-build3.marvell.com>
Co-authored-by: marvell <marvell@cpss-build2.marvell.com>
- Why I did it
To implement Syslog Source IP feature
In order to include the following commit: 8e5d478 [ssip]: Add CLI (#2191)
- How I did it
Updated syslog config template
Advanced submodule sonic-utilities
ea11b22 [sonic-bootchart] add sonic-bootchart (#2195)
8e5d478 [ssip]: Add CLI (#2191)
1dacb7f Replace pyswsssdk with swsscommon (#2251)
- How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
- Why I did it
Support Mellanox-SN4600C-C64 as T1 switch in dual-ToR scenario
This is to port #11032 and #11299 from 202012 to master.
Support additional queue and PG in buffer templates, including both traditional and dynamic model
Support mapping DSCP 2/6 to lossless traffic in the QoS template.
Add macros to generate additional lossless PG in the dynamic model
Adjust the order in which the generic/dedicated (with additional lossless queues) macros are checked and called to generate buffer tables in common template buffers_config.j2
Buffer tables are rendered via using macros.
Both generic and dedicated macros are defined on our platform. Currently, the generic one is called as long as it is defined, which causes the generic one always being called on our platform. To avoid it, the dedicated macrio is checked and called first and then the generic ones.
Support MAP_PFC_PRIORITY_TO_PRIORITY_GROUP on ports with additional lossless queues.
On Mellanox-SN4600C-C64, buffer configuration for t1 is calculated as:
40 * 100G downlink ports with 4 lossless PGs/queues, 1 lossy PG, and 3 lossy queues
16 * 100G uplink ports with 2 lossless PGs/queues, 1 lossy PG, and 5 lossy queues
Signed-off-by: Stephen Sun <stephens@nvidia.com>
#### Why I did it
Submodule update for sonic-swss-common with following change:
597b022 Add SonicDBConfig.getInstanceList() API (#639)
7073dc6 add table name for vlan_stacking (#646)
7e39f31 Add SonicV2Connector::set method for int value. (#648)
154cc9c Improve hset and hdel performance with RedisPipeline. (#647)
#### How I did it
#### How to verify it
#### Which release branch to backport (provide reason below if selected)
<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
#### Description for the changelog
Submodule update for sonic-swss-common with following change:
597b022 Add SonicDBConfig.getInstanceList() API (#639)
7073dc6 add table name for vlan_stacking (#646)
7e39f31 Add SonicV2Connector::set method for int value. (#648)
154cc9c Improve hset and hdel performance with RedisPipeline. (#647)
#### A picture of a cute animal (not mandatory but encouraged)
Fix an issue with front panel port led introduced in previous PR
Implement status led for linecards
Implement full power cycle for linecards
Improve reboot cause reporting for Ucd devices
Add fan support for PikeZ
Miscellaneous fixes and improvements
