#### Why I did it
src/sonic-linux-kernel
```
* d070cae - (HEAD -> master, origin/master, origin/HEAD) arm64: dts: marvell: Add Nokia 7215-IXS-A1 board (#321) (34 hours ago) [Pavan-Nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-platform-common
```
* 465f95e - (HEAD -> master, origin/master, origin/HEAD) Default implementation of under/over speed checks (#382) (9 hours ago) [spilkey-cisco]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-utilities
```
* 7ca31477 - (HEAD -> master, origin/master, origin/HEAD) [db_migrator] Set docker_routing_config_mode to the value obtained from minigraph parser (#2890) (10 hours ago) [Vaibhav Hemant Dixit]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
Support reset factory in Sonic OS
[Reset Factory HLD](https://github.com/sonic-net/SONiC/pull/1231)
[Sonic-mgmt tests](https://github.com/sonic-net/sonic-mgmt/pull/7652)
#### How I did it
- Added new script "/usr/bin/reset-factory"
* It generates a new config_db.json files with factory configurations
* It clears system files and logs
* It removes all docker containers on system except database
* It clears non-default users and restores default users password
- Dump the default users info to a new file during build "/etc/sonic/default_users.json"
- Supported new type "Keep-basic" in "config-setup factory"
- Add new conf file for config-setup "/etc/config-setup/config-setup.conf
#### How to verify it
- Run reset-factory script with all types: < none | keep-all-config | only-config | keep-basic >
- Run config-setup factory with parameters < none | keep-basic >
#### Description for the changelog
Support reset factory in Sonic OS
#### Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
#### Why I did it
Failed to build sonic-dhcp6relay_1.0.0-0_amd64.deb
#### How I did it
src/dhcprelay has git submodule.
Dependency files by "git ls-files" are not picked files in submodules.
Add --recurse-submodules, work again.
#### How to verify it
make all
Why I did it
port_config.ini and hwsku.json are needed to generate the default config
switch_type needs to be "dpu" to spawn the right set of processes during dvs initialization and to make sure that DASH APIs can be handled properly
Work item tracking
Microsoft ADO 24375371:
How I did it
Use the same hwsku.json and port_config.ini for DPU-2P as the ones used for Nvidia-MBF2H536C SKU in nvidia-sonic sonic-buildimage repo.
Set switch_type to "dpu" in DEVICE_METADATA configuration to make sure DASH specific APIs are handled properly
Signed-off-by: Prabhat Aravind <paravind@microsoft.com>
#### Why I did it
src/sonic-swss
```
* 776af62c - (HEAD -> master, origin/master, origin/HEAD) [CodeQL]: Use dependencies with relevant versions in azp template. (#2845) (4 hours ago) [Nazarii Hnydyn]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
src/sonic-gnmi
```
* 01fe667 - (HEAD -> master, origin/master, origin/HEAD) Merge pull request #134 from FengPan-Frank/fenpan_dialout_rename (3 days ago) [Feng-msft]
|\
| * 994c69c - Rename --enable-dialout option into ENABLE_DIALOUT to follow the convention. (3 days ago) [Feng Pan]
|/
* a9126da - Update makefile to support armhf (#132) (3 days ago) [ganglv]
* 0d80c0d - prevent potential panic: return immediately if there exists error (#113) (7 days ago) [Mai Bui]
* 3c0fca3 - Merge pull request #131 from FengPan-Frank/fenpan_dialout (7 days ago) [Feng-msft]
|\
| * c3d3266 - Add build flag into gnmi as --enable-dialout. (8 days ago) [Feng Pan]
|/
* fd78c42 - add semgrep (#126) (2 weeks ago) [Mai Bui]
* 214fa1c - TranslClient: Use new translib subscription APIs (#122) (3 weeks ago) [Sachin Holla]
* 87d8eb3 - (origin/202305) TranslClient: use PathValidator to sanitize the request paths (#112) (3 weeks ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
#### Why I did it
After k8s upgrade a container, k8s can only know the container is running, don't know the service's status inside container. So we need a probe inside container, k8s will call the probe to check whether the container is really ready.
##### Work item tracking
- Microsoft ADO **(number only)**: 22453004
#### How I did it
Add a health check probe inside config engine container, the probe will check whether the start service exit normally or not if the start service exists and call the python script to do container self-related specific checks if the script is there. The python script should be implemented by feature owner if it's needed.
more details: [design doc](https://github.com/sonic-net/SONiC/blob/master/doc/kubernetes/health-check.md)
#### How to verify it
Check path /usr/bin/readiness_probe.sh inside container.
#### Which release branch to backport (provide reason below if selected)
- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [x] 202205
- [x] 202211
#### Tested branch (Please provide the tested image version)
- [x] 20220531.28
Why I did it
This is part of sonic-mgmt-docker Python3 migration project.
Currently Python3 packages are in the Python3 virtual environment. This PR will add Python3 packages to real file system.
After we migrate all script to use Python3 in real file system, the Python3 venv will be deleted.
After this PR, in sonic-mgmt-docker,
Directly run cmd - pytest will use Python2's version.
python3 -m pytest will use Python3's version.
How I did it
Modify sonic-mgmt-docker j2 script.
How to verify it
Build a private sonic-mgmt-docker and run basic test case with Python3.
* Add an ability to configure remote syslog servers
* Add an initial configuration for remote syslog
* Extend YANG module and add unit tests
#### Why I did it
Adding the following functionality to rsyslog feature:
- Configure remote syslog servers: protocol, filter, severity level
- Update global syslog configuration: severity level, message format
#### How I did it
added parameters to syslog server and global configuration.
#### How to verify it
create syslog server using CLI/adding to Redis-DB
verify server is added to file /etc/rsyslog.conf and server is functional.
#### Description for the changelog
extend rsyslog capabilities, added server and global configuration parameters.
#### Link to config_db schema for YANG module changes
https://github.com/iavraham/sonic-buildimage/blob/master/src/sonic-yang-models/yang-models/sonic-syslog.yang
- Why I did it
Implemented ssh configurations
- How I did it
Added ssh config table in configDB, once changed - hostcfgd will change the relevant OS files (sshd_config)
- How to verify it
Tests in sonic-host-services. Change relevant configs in configDB such as ports, and see sshd port was modified
*use lower case for IPv6 address as internal key and bfd session key. fixes#15764
Why I did it
*staticroutebfd uses the IPv6 address string as a key to create bfd session and cache the bfd sessions using it as a key.
When the IPv6 address string has uppercase letter in the static route nexthop list, the string with uppercase letter key is stored in the cache, but the BFD STATE_DB uses lowercase for IPv6 address, so when the staticroutebfd get the bfd state event, it cannot find the bfd session in its local cache because of the letter case.
#### Why I did it
We should not modify minigraph schema.
#### How I did it
Update minigraph.py and remove unit test.
#### How to verify it
Run sonic-config-engine unit test.
Why I did it
Refine PR test template format.
How I did it
Refine PR test template format.
How to verify it
PR test executed normally.
Signed-off-by: Chun'ang Li <chunangli@microsoft.com>
#### Why I did it
src/sonic-mgmt-common
```
* 341fd73 - (HEAD -> master, origin/master, origin/HEAD) Remove invalid db type definitions: ERROR_DB, USER_DB (#94) (3 days ago) [Sachin Holla]
```
#### How I did it
#### How to verify it
#### Description for the changelog
*What I did:
Enable BFD for Static Route for chassis-packet. This will trigger the use of the feature as defined in here: #13789
Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
fix static route uninstall issue when all nexthops are not reachable.
the feature was working but the bug was introduced when support dynamic bfd enable/disable. Added UT testcase to guard this.
#### Why I did it
src/sonic-dash-api/sonic-dash-api
```
* 3f728d1 - (HEAD -> master, origin/master, origin/HEAD) Update vnet_direct in route.proto (#4) (11 days ago) [Ze Gan]
```
#### How I did it
#### How to verify it
#### Description for the changelog
Why I did it
To reduce the container's dependency from host system
Work item tracking
Microsoft ADO (number only):
17713469
How I did it
Move the k8s container startup script to config engine container, other than mount it from host.
How to verify it
Check file path(/usr/share/sonic/scripts/container_startup.py) inside config engine container.
Signed-off-by: Yun Li <yunli1@microsoft.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>
Why I did it
Tacacs nss library uses popen to execute useradd and usermod commands. Popen executes using a shell (/bin/sh) which is passed the command string with "-c". This means that if untrusted user input is supplied, unexpected shell escapes can occur. In this case the username supplied can be untrusted user input when logging in via ssh or other methods when tacacs is enabled. Debian has very little limitation on usernames and as such characters such as quotes, braces, $, >, | etc are all allowed. Since the nss library is run by root, any shell escape will be ran as root.
In the current community version of tacacs nss library, the issue is mitigated by the fact that the useradd command is only ran if the user is found to exist on the tacacs server, so the bad username would have to already exists there which is unlikely. However, internally (at Dell) we had to modify this behavior to support other tacacs servers that do not allow authorization messages to verify user existence prior to a successful authentication. These servers include Cisco ISE and Aruba ClearPass. In order to support these tacacs+ servers, we have to create a temporary user immediately, which means this would be a much bigger issue.
I also plan to supply the patch to support ISE and ClearPass and as such, I would suggest taking this patch to remediate this issue first.
How I did it
Replace call to popen with fork/execl of the useradd/usermod binary directly.
How to verify it
Install patched version of libnss-tacplus and verify that tacacs+ user login still works as expected.
Why I did it
For the DASH scenario, the APP_DB will be optimized by protobuf message for less memory consumption.
How I did it
Download the Debian package of protobuf 3.21.12 and create a corresponding rule for building it.
Add a submodule of sonic-dash-api and generated its Debian package which includes C++ library and Python library
How to verify it
Check artifacts of Azp that the protobuf-related and dash-api deb packages should be generated.
Signed-off-by: Ze Gan <ganze718@gmail.com>
#### Why I did it
src/sonic-platform-common
```
* 10af810 - (HEAD -> master, origin/master, origin/HEAD) More prevention of fatal exception caused by VDM dictionary missing fields when a transceiver has just been pulled (#376) (5 hours ago) [snider-nokia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
* [202012][platform/barefoot] (#8543)
Why I did it
Pcied running by python 2.
How I did it
dropped python2 support and add python3 support for pcied in file docker-pmon.supervisord.conf.j2
How to verify it
docker exec pmon supervisorctl status
* [Netberg][nba710] Added initial support for Aurora 710
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
---------
Signed-off-by: Andrew Sapronov <andrew.sapronov@gmail.com>
Co-authored-by: Kostiantyn Yarovyi <kostiantynx.yarovyi@intel.com>
Migrate flush_unused_database from py-redis to sonic-swss-common
#### Why I did it
flush_unused_database using py-redis, but sonic-swss-common already support flushdb, so we need migrate to sonic-swss-common
##### Work item tracking
- Microsoft ADO **(number only)**: 24292565
#### How I did it
Migrate flush_unused_database from py-redis to sonic-swss-common
#### How to verify it
Pass all UT and E2E test
#### Description for the changelog
Migrate flush_unused_database from py-redis to sonic-swss-common
Why I did it
To support dynamic swapping of module types/speeds (400G/100G/40G)
To optimize CMIS ZR optics operation
How I did it
Reinitialize xcvr_api at module removal/insertion time, and also optimize cache for ZR optics.
How to verify it
Verify that different (supported) module types can be dynamically swapped (removed/inserted) and that each is properly provisioned by Xcvrd and has its EEPROM information accurately reported in Redis DB (using "show transceiver eeprom") as well as "sfputil show eeprom" direct access.
Also verify that Xcvrd initialization and operation with 400G CMIS ZR optics is both efficient and functional.
** edit 6/14/23: pushed enhanced caching (full memory map) support and elimination of base class APIs override.
Why I did it
Sharing the storage of syncd with other proprietary application extensions allows them to communicate with syncd in differnt ways.
If one container wants to pass some information to syncd then shared storage can be used. However, today the shared storage isn't cleaned on restarts making it possible for syncd to read out-of-date information generated in the past.
NOTE: No plans to use it for standard SONIC dockers and we are working on removing the SDK dependency from PMON docker
How I did it
Implemented new service to clean the shared storage.
How to verify it
Do reboot/fast-reboot/warm-reboot/config-reload/systemctl restart swss and verify /tmp/ is cleaned after each restart in syncd container.
Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
#### Why I did it
src/sonic-host-services
```
* bc08806 - (HEAD -> master, origin/master, origin/HEAD) Implemented ssh configurations (#32) (14 hours ago) [ycoheNvidia]
```
#### How I did it
#### How to verify it
#### Description for the changelog
