These changes, in conjunction with NDK version >= 22.9.17 address the thermal logging issues discussed at Nokia-ION/ndk#27. While the changes contained at this PR do not require coupling to NDK version >= 22.9.17, thermal logging enhancements will not be available without updated NDK >= 22.9.17. Thus, coupling with NDK >=22.9.17 is preferred and recommended.
Why I did it
To address thermal logging deficiencies.
Work item tracking
Microsoft ADO (number only): 26365734
How I did it
The following changes are included:
Threshold configuration values are provided in the associated device data .json files. There is also a change included to better handle the condition where an SFP module read fails.
Modify the module.py reboot to support reboot linecard from Supervisor
- Modify reboot to call _reboot_imm for single IMM card reboot
- Add log to the ndk_cmd to log the operation of "reboot-linecard" and "shutdown/satrtup the sfm"
Add new nokia_cmd set command and modify show ndk-status output
- Add a new function reboot_imm() to nokia_common.py to support reboot a single IMM slot from CPM
- Added new command: nokia_cmd set reboot-linecard <slot> [forece] for CPM
- Append a new column "RebootStatus" at the end of output of "nokia_cmd show ndk-status"
- Provide ability for IMM to disable all transceiver module TX at reboot time
- Remove defunct xcvr-resync service
Why I did it
When Supervisor card is rebooted by using PMON API, it takes about 90 seconds to trigger the shutdown in down path. At this time linecards have been up. This delays linecards database initialization which is trying to PING/PONG the database-chassis. To address this issue, we modified the NDK to use the system call with "sudo reboot" when the request is from PMON API on Supervisor case. The NDK version is 22.9.20 and greater. This new NDK requires this modifcaiton of platform_reboot to work with.
Work item tracking
Microsoft ADO (number only): 26365734
How I did it
Modify the platform_reboot In Supervisor not to reboot all IMMs since it has been done in the function reboot() in module.py. Also handle the reboot-cause.txt for on the Supervisor when the reboot is request from PMON API.
Modify the Nokia platform specific platform_reboot in linecard to disable all SPFs.
This PR works with NDK version 22.9.20 and above
Signed-off-by: mlok <marty.lok@nokia.com>
For 40G optics there is SAI handling of T0 facing ports to be set with SR4 type and unreliable los set for a fixed set of ports. For this property to be invoked the requirement is set
phy_unlos_msft=1 in config.bcm.
This change is to meet the requirement and once this property is set, the los/interface type settings is applied by SAI on the required ports.
Why I did it
For Arista-7060CX-32S-Q32 T1, 40G ports RX_ERR minimalization during connected device reboot
can be achieved by turning on Unreliable LOS and SR4 media_type for all ports which are connected to T0.
The property phy_unlos_msft=1 is to exclusively enable this property.
Microsoft ADO: 25941176
How I did it
Changes in SAI and turning on property
How to verify it
Ran the changes on a testbed and verified configurations are as intended.
with property
admin@sonic2:~$ bcmcmd "phy diag xe8 dsc config" | grep -C 2 "LOS"
Brdfe_on = 0
Media Type = 2
Unreliable LOS = 1
Scrambling Disable = 0
Lane Config from PCS = 0
without property
admin@sonic:~$ bcmcmd "phy diag xe8 dsc config" | grep -C 2 "LOS"
Brdfe_on = 0
Media Type = 0
Unreliable LOS = 0
Scrambling Disable = 0
Lane Config from PCS = 0
Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Why I did it
To fix ecmp hash polarization issue.
Work item tracking
Microsoft ADO (number only): 26085143
How I did it
Add sai_hash_seed_config_hash_offset_enable=1 in all config.bcm that Broadcom T1 uses.
HardwareSku
Force10-S6100-T1
Force10-S6100-ITPAC-T1
Force10-S6100
Celestica-DX010-C32
Arista-7260CX3-C64
Arista-7060CX-32S-Q32
Arista-7060CX-32S-C32-T1
Arista-7060CX-32S-C32
Arista-7050QX32S-Q32
Arista-7050QX-32S-S4Q31
Arista-7050-QX32
Arista-7050-QX-32SInclude Broadcom's fix by upgrading xgs SAI version to 8.4.35.0.
8.4.35.0: [CSP 00012324019] back-porting SONIC-75006 to SAI8.4
8.4.34.0:
[CSP 00012318293] back-porting SONIC-81534 to SAI8.4;
ECMP LB traffic polarization, configure hash_offset along with hash_seed attr
Run qual with only xgs SAI version upgraded to 8.4.35.0:
on TH2: https://elastictest.org/scheduler/testplan/6579b36ccfacd86e78e3e885?leftSideViewMode=detail&prop=status&order=ascending
on TH: https://elastictest.org/scheduler/testplan/657a75f8c1d3b51fc1d585b4?leftSideViewMode=detail&prop=status&order=ascending
How to verify it
use tests/ecmp/test_ecmp_sai_value.py to verify.
* Support lazy install of sdk drivers
This patch adds support for lazy install of Marvell prestera SDK
drivers for platform-nokia. Lazy install for drivers is added as
updated sdk driver needs to classify the drivers required for platform
during compile time. SDK drivers and platform files are now fetched
from a submodule(mrvl-prestera).
Additionaly, DTB required for sonic_fit creation during compile time
is sourced from sonic-linux-kernel.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
* Add hugepage cmdline agrument
Updated sdk & driver requries hugepage to be reserved during kernel
boot. These kernel command line agrument are passed from installer.conf
in device folder.
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
* Update SAI deb to 1.12.0-3
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
---------
Signed-off-by: Pavan Naregundi <pnaregundi@marvell.com>
Why I did it
Add the create_only_config_db_buffers attribute to the DEVICE_METADATA|localhost. If the "create_only_config_db_buffers" exists and is equal to "true" - the buffers will be created according to the config_db configuration (for example BUFFER_QUEUE|* table), otherwise the maximum available buffers (which are read from SAI) will be created, regardless of the CONFIG_DB buffers configuration.
Work item tracking
Microsoft ADO (number only):
How I did it
Add the create_only_config_db_buffers.json files for Mellanox devices (not MSFT SKU's), and inject the content to the CONFIG_DB during the swss docker container start.
How to verify it
Manual verification:
Install the image with this PR included on the not MSFT SKU switch
Check the show queue counters output and verify that only configured in CONFIG_DB buffers are created
root@sonic:/home/admin# show queue counters
Port TxQ Counter/pkts Counter/bytes Drop/pkts Drop/bytes
--------- ----- -------------- --------------- ----------- ------------
Ethernet0 UC0 0 0 0 N/A
Ethernet0 UC1 0 0 0 N/A
Ethernet0 UC2 0 0 0 N/A
Ethernet0 UC3 0 0 0 N/A
Ethernet0 UC4 0 0 0 N/A
Ethernet0 UC5 0 0 0 N/A
Ethernet0 UC6 0 0 0 N/A
Open the /usr/share/sonic/device/$DEVICE/$SKU/create_only_config_db_buffers.json and change it to:
"create_only_config_db_buffers": "false"
Do config reload
Check the show queue counters output and verify that all available buffers are created
root@sonic:/home/admin# show queue counters
Port TxQ Counter/pkts Counter/bytes Drop/pkts Drop/bytes
--------- ----- -------------- --------------- ----------- ------------
Ethernet0 UC0 0 0 0 N/A
Ethernet0 UC1 0 0 0 N/A
Ethernet0 UC2 0 0 0 N/A
Ethernet0 UC3 0 0 0 N/A
Ethernet0 UC4 0 0 0 N/A
Ethernet0 UC5 0 0 0 N/A
Ethernet0 UC6 0 0 0 N/A
Ethernet0 UC7 60 15346 0 N/A
Ethernet0 MC8 N/A N/A N/A N/A
Ethernet0 MC9 N/A N/A N/A N/A
Ethernet0 MC10 N/A N/A N/A N/A
Ethernet0 MC11 N/A N/A N/A N/A
Ethernet0 MC12 N/A N/A N/A N/A
Ethernet0 MC13 N/A N/A N/A N/A
Ethernet0 MC14 N/A N/A N/A N/A
Ethernet0 MC15 N/A N/A N/A N/A
Why I did it
To improve FAST reboot dataplane downtime
Work item tracking
N/A
How I did it
Updated SAI xml config file
How to verify it
Run sonic-mgmt tests of fastboot
On some products from this line one of the management NIC might be unpopulated.
On such products this leads to errors from pcied and pcie-check.sh
How I did it
Remove this PCIe device from pcie.yaml
How to verify it
Run pcieutil check on the 2 hardware variants and validate that it passes.
Restart pcied and make sure that there is no more error logs in the syslog.
ADO: 25447788
BACKPORT: #16781
Why I did it
To enable Store-And-Forward switching mode for SN2700/SN3800/SN4600C/SN4700
Work item tracking
N/A
How I did it
Added vendor SAI config options
How to verify it
make configure PLATFORM=mellanox
make target/sonic-mellanox.bin
- Why I did it
Because the Spectrum4 devices don't support mlxtrace utility.
- How I did it
Edit sai.profile and remove mlxtrace_spectrum4_itrace_*.cfg.ext files
Signed-off-by: vadymhlushko-mlnx <vadymh@nvidia.com>
Co-authored-by: Vadym Hlushko <62022266+vadymhlushko-mlnx@users.noreply.github.com>
- Why I did it
1. Update Mellanox HW-MGMT package to newer version V.7.0030.1011
2. Replace the SONiC PMON Thermal control algorithm with the one inside the HW-MGMT package on all Nvidia platforms
3. Support Spectrum-4 systems
- How I did it
1. Update the HW-MGMT package version number and submodule pointer
2. Remove the thermal control algorithm implementation from Mellanox platform API
3. Revise the patch to HW-MGMT package which will disable HW-MGMT from running on SIMX
4. Update the downstream kernel patch list
Signed-off-by: Kebo Liu <kebol@nvidia.com>
On S6100 we are seeing almost 100K interrupts per second on intels i801 SMBUS controller which affects systems performance.
We now disable the i801 driver interrupt and instead enable polling
Microsoft ADO (number only): 24910530
How I did it
Disable the interrupt by passing the interrupt disable feature argument to i2c-i801 driver
How to verify it
This fix is NOT applicable for ARM based platforms. Applicable only for intel based platforms:-
- On SN2700 its already disabled in Mellanox hw-mgmt
- Celestica DX010 and E1031
- Dell S6100 verified the interrupts are no longer incrementing.
- Arista 7260CX3
Signed-off-by: Prince George <prgeor@microsoft.com>
Why I did it
Update the platform_reboot of Nokia Platform IXR-7250E-36x400G to displays the correct reboot-cause history when reboot from supervisor card.
Work item tracking
Microsoft ADO (number only):
How I did it
Modify the platform_reboot script to copy the correct reboo-cause.txt file from NDK to the /host/reboot-cause directory at the down cycle when the reboot is issued from Supervisor (for both reboot right after install a new image and normal reboot)
Signed-off-by: mlok <marty.lok@nokia.com>
Why I did it
Dell S6100 Platform components needs to be updated.
How I did it
Modified platform.json to fix the issue.
How to verify it
Run sonic-mgmt component test and check whether it passes.
- Why I did it
Revise lable name and fix typo in sensor.conf of 4600C
- How I did it
Revise lable name and fix typo in sensor.conf of 4600C
- How to verify it
Manual test
sonic-mgmt test_sensors.py
- Why I did it
Add new breakout modes to be used in PAM4 supported cables
- How I did it
- How to verify it
Verified the 50G per lane breakout modes are applied properly on the switch
Signed-off-by: Vivek Reddy Karri <vkarri@nvidia.com>
- Why I did it
Enabled port late create on SN5600 Spectrum-4 switch boots up with no ports
Work item tracking
N/A
- How I did it
Updated SAI xml config file
- How to verify it
Run sonic-mgmt tests of fastboot
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
#### Why I did it
When a kernel crash occurs, the system will reboot to the kdump capture kernel if kdump is enabled (`config kdump enable`). In the kdump capture boot, it only stores the crash information, and then reboot the system to a normal boot.
In this boot, no SONiC service is started but it invokes `reboot` which is actually the SONiC reboot that depends on SONiC services. There is a logic to skip all SONiC stuff and invoke platform reboot in SONiC reboot to avoid issues.
However, on Nvidia platforms, the platform reboot still depends on SONiC services, which can cause issues.
So, the Debian reboot is called directly in platform reboot if it is invoked from the kdump capture boot.
#### How I did it
Manual test
Added support data for fabric monitoring in CONFIG_DB
The CONFIG_DB now has the FABRIC_MONITOR|FABRIC_MONITOR_DATA table for default value for fabric port monitoring. An example output of getting this table is:
sonic-db-cli CONFIG_DB hgetall "FABRIC_MONITOR|FABRIC_MONITOR_DATA"
{'monErrThreshCrcCells': '1', 'monErrThreshRxCells': '61035156', 'monPollThreshIsolation': '1', 'monPollThreshRecovery': '8'}
The CONFIG_DB now also has a table for each fabric port for its isolate status.
An example output of getting this table is:
sonic-db-cli CONFIG_DB hgetall "FABRIC_PORT|Fabric20"
{'alias': 'Fabric20', 'isolateStatus': 'False', 'lanes': '20'}
Co-authored-by: jfeng-arista <98421150+jfeng-arista@users.noreply.github.com>
Why I did it
sonic-mgmt is failing tests due to invalid test data in platform.json
Fwutil is upset the chassis name in the platform_component.json of the 7060CX-32S
How I did it
Fixed the aforementioned issues
Why I did it
Work item tracking
Microsoft ADO (24182162):
How I did it
update the config.bcm to set the default fec RS 100G Linecard
How to verify it
Tests on chassis
Why I did it
fix possible cpld race read issue between watchdog and reboot cause
process
How I did it
Use fcntl.flock to limit parallel access to cpld sys file
How to verify it
It can be simulated and verified with following python script
``` python3
import fcntl
import signal
import threading
exit_flag = False
def get_cpld_reg_value(getreg_path, register):
file = open(getreg_path, 'w+')
# Acquire an exclusive lock on the file
fcntl.flock(file, fcntl.LOCK_EX)
try:
file.write(register + '\n')
file.flush()
# Seek to the beginning of the file
file.seek(0)
# Read the content of the file
result = file.readline().strip()
finally:
# Release the lock and close the file
fcntl.flock(file, fcntl.LOCK_UN)
file.close()
return result
def cpld_read(thread_num, cpld_reg, expect_val):
while not exit_flag:
val
= get_cpld_reg_value("/sys/devices/platform/dx010_cpld/getreg",
cpld_reg)
#print(f"Thread {thread_num}: get cpld reg {cpld_reg}, value
{val}")
if val != expect_val:
print(f"Thread {thread_num}: get cpld reg {cpld_reg}, value
{val}, expect_val {expect_val}")
def signal_handler(sig, frame):
global exit_flag
print("Ctrl+C detected. Quitting...")
exit_flag = True
if __name__ == '__main__':
# Register the signal handler for Ctrl+C
signal.signal(signal.SIGINT, signal_handler)
t1 = threading.Thread(target=cpld_read, args=(1, '0x103', '0x11',))
t2 = threading.Thread(target=cpld_read, args=(2, '0x141', '0x00',))
t1.start()
t2.start()
t1.join()
t2.join()
```
Why I did it
Update the device data files to support 1024 LAGs for Nokia IXR7250E platform
fixes https://github.com/Nokia-ION/ndk/issues/15
How I did it
Update the lag_id_end=1024 in chassisdb.conf file and add the trunk_group_max_members=16 in the BCM config file
How to verify it
check to allow to create lag ids up to 1024 with 16 port members
Signed-off-by: mlok <marty.lok@nokia.com>
* [202205] Update SOC properties for DLR_INIT based pfcwd recovery (#15217)
Why I did it
Update soc properties for certain roles that need to use pfcwd dlr init based recovery mechanism
How to verify it
Updated the templates on a 7050cx3 dual tor and 7260 T1 which satisfies these conditions and validated pfcwd recovery which uses DLR_INIT based mechanism. Also validated that this mechanism is not used on 7050cx3 single tor with the updated templates
Signed-off-by: Neetha John <nejo@microsoft.com>
#### Why I did it
To add new SKU Mellanox-SN4700-O8C48 with following requirements:
| Port configuration | Value |
| ------ |--------- |
| Breakout mode for each port |**Defined in port mapping** |
| Speed of the port | **Defined in Port mapping** |
| Auto-negotiation enable/disable | **No setting required** |
| FEC mode | **No setting required** |
|Type of transceiver used | **Not needed**|
Buffer configuration | Value
------ |---------
Shared headroom | **Enabled**
Shared headroom pool factor | **2**
Dynamic Buffer | **Disable**
In static buffer scenario how many uplinks and downlinks? | **48x100G Downlinks and 8x400G uplinks**
2km cable support required? | **Yes**
Switch configuration | Value
------ |---------
Warmboot enabled? | **yes**
Should warmboot be added to SAI profile when enabled? | **yes**
Is VxLAN source port range set? | **No**
Should Vxlan source port range be added to SAI profile when set. | **No**
Is Static Policy Based Hashing enabled? | **No**
Port Mapping
| Ports | Mode |
| ------ |--------- |
| 1-12 | 2x100G |
| 13-20 | 1x400G |
| 21-32 | 2x100G |
Number of Uplinks / Downlinks:
T1 topology: **48x100G Downlinks 8x400G uplinks**.
Length of downlink: **40m**
Length of uplink: **2000m**
##### Work item tracking
- Microsoft ADO **(number only)**:
#### How I did it
Defined the SKU as per requirements
#### How to verify it
Load the SKU and verify if all links come up and traffic passes.
#### A picture of a cute animal (not mandatory but encouraged)
